Related
LG flash tool just stays at ready. Ive unplugged and replugged. Unplugged, powered off, plugged back in as download mode still stays at ready. So back to flash is out. Phone stuck at lg logo, but can boot to download mode, and twrp. Computer doesn't recognize twrp in adb sideload mode. I'm on windows 8, using the oem cable, and turned off the signature enforcement and restarted computer as well. So that's out. Otg is out as well I've tried exfat and fat32 on an 8gb san disk cruzer. I've used just the otg and ive used it in combination with a y--cable, both of which i've used before successfully. Also I checked the external sd folders for the otg and used the cat/proc/mounts in terminal. This post definitely sounds condescending and i'm sorry. This is one time when i would be so grateful to be proved a moron. The one solution i haven't tried yet is using the flash tool with the ota .tot file, instead of the shipping rom. What do I do?
If u can't get into recovery then revert to stock is the only option. Try holding power and vol down and press on screen where home button should be and it should take u to recovery and then u can use sideload with koush drivers and if it does not work then going back to stock is only option.
Sent from my LG-D800 using xda app-developers app
What are koush drivers? Any idea what im doing wrong with lg flash tool, because that isn't working, otherwise i would've went back to stock already.
Stock lg mobile drivers don't seem to help pc see ur phone in recovery mode so koush drivers or pdanet installed in ur pc can help solve ur problem.
Sent from my LG-D800 using xda app-developers app
Thank you so much. It was dumb to ask what the drivers were, i googled it, installed, and it worked. thank you so much.
I have been trying to follow the flashing instructions for my LG G2 D802 from here
http://forum.xda-developers.com/showthread.php?t=2432476
When I click Upgrade Start from the Normal Web Upgrade Test button I get this error message.
Please Install CSMG B2C Client Tool
Select Tool -> B2C client setup menu
Can someone tell me where iam going wrong and what this means.
Thanks.
2428256
Has no one else had this problem before? Is there an alternate way of flashing a kdz file?
Go to tool on the site and download that b2c package. I suppose.
Sent from my LG-D802 using XDA Premium 4 mobile app
read the readme in the root folder. It says something about installing, then launch window something and then start from the tutorial again.
They skipped the part on how to install it lol.
Right, I have installed it now, I am using a different computer as well.
I have run into another problem now. It gets to about 15% on the phone update window and then says connect phone to usb cable.
I have looked at this picture here http://forum.xda-developers.com/picture.php?albumid=8677&pictureid=32161 and compared my device
manager. I have the top item in modems but not the LG Mobile Composite USB device. The drivers all said they installed correctly. Anyone
know how to fix this?
Thanks
JollyGiant said:
Right, I have installed it now, I am using a different computer as well.
I have run into another problem now. It gets to about 15% on the phone update window and then says connect phone to usb cable.
I have looked at this picture here http://forum.xda-developers.com/picture.php?albumid=8677&pictureid=32161 and compared my device
manager. I have the top item in modems but not the LG Mobile Composite USB device. The drivers all said they installed correctly. Anyone
know how to fix this?
Thanks
Click to expand...
Click to collapse
This happened to me, stuck at 15% using the flash tool. I put everything I needed on a thumb drive (lg drivers, B2C setup,flash tool, .kdz file)and used another PC. Worked smoothly on a different machine.
missiveusa said:
This happened to me, stuck at 15% using the flash tool. I put everything I needed on a thumb drive (lg drivers, B2C setup,flash tool, .kdz file)and used another PC. Worked smoothly on a different machine.
Click to expand...
Click to collapse
Anyone else have any ides on this?
I have installed everything on another computer now so this is the 3rd one and I am still getting the connection issues.
If I plug the phone in via usb I can see it in windows explorer and transfer files but LgFlashTools keeps coming up that it is not connected.
It goes through a series of 3 events.
_IsConnectedPhone Call
_isConnectedPhone(0)
0 - NotConnected
1 - Normal Connect Success
2 - Emergency Connect Success
Have I not done something right or have I missed some settings in the phone.
I am using these instructions http://forum.xda-developers.com/showthread.php?t=2085344
Any suggestions appreciated
I would try just the lg tool from lg website, download mode, then update recovery.
that should get you the latest lg rom for your device
bachera said:
I would try just the lg tool from lg website, download mode, then update recovery.
that should get you the latest lg rom for your device
Click to expand...
Click to collapse
I downloaded the tool from the LG website but it just hangs on installation.
Is there no one that has seen my connection issue before?
My original problem stems from a wrong kdz being installed previously, I have a 32GB phone that reports 16GB.
I have but different situation
I tried various, reinstalling drivers, reboot computer. reboot phone in recovery if it still works, wipe system data cache dalvik, shutdown. connect to computer press volume up. see download mode. open tool and try again.
if that doesnt work, some other guys reported changing port number somewhere.
Sent from my LG-D802 using xda app-developers app
Hi Guys,
When updated my LG L5 E610v with LG Mobile support tool, it stucks in 'Download is in progress. Don not disconnect cable.
Tried a lot to fix this problem, no results.
I figured out that using adb, fastboot, PDAnet, LG suite, LG mobile support tool, kdz updater, a lot of different usb cables, button combinations, shake the phone, etc, my pc (and all software I used to connect) do not recognice my phone properly or not. For example: using adb, i get: device not found, etc.
I installed the right lg usb driver properly and see on device manager 'Modem' and 'usb device' installed. Seems to me, no proble at all !!!
Who wants to help me to figured out this problem ??? To say this, I am a noob with this problem.
Thx in advanced,
Ron
The Netherlands
RonvA said:
Hi Guys,
When updated my LG L5 E610v with LG Mobile support tool, it stucks in 'Download is in progress. Don not disconnect cable.
Tried a lot to fix this problem, no results.
I figured out that using adb, fastboot, PDAnet, LG suite, LG mobile support tool, kdz updater, a lot of different usb cables, button combinations, shake the phone, etc, my pc (and all software I used to connect) do not recognice my phone properly or not. For example: using adb, i get: device not found, etc.
I installed the right lg usb driver properly and see on device manager 'Modem' and 'usb device' installed. Seems to me, no proble at all !!!
Who wants to help me to figured out this problem ??? To say this, I am a noob with this problem.
Thx in advanced,
Ron
The Netherlands
Click to expand...
Click to collapse
you need to download the correct frameware for your phone. And install kdz correctly. If your using a windows pc go to advance settings and under modem disable lg mobile mode and restart your pc.
If you installed kdz correctly on your pc, open in the kdz file run windows enabler if your using windows.
On your phone remove your battery, plug your usb to your phone holding volume-
You should be in download mode. If your not in download mode, unplug usb cable.
Hold vol+ and vol- at the same time. Once your connected and your phone is showing download mode run kdz. If it fails the first tine just restart kdz or unplug your phone and re connect it.
Sent from my LG-P705 using XDA Free mobile app
Nesh89 said:
you need to download the correct frameware for your phone. And install kdz correctly. If your using a windows pc go to advance settings and under modem disable lg mobile mode and restart your pc.
If you installed kdz correctly on your pc, open in the kdz file run windows enabler if your using windows.
On your phone remove your battery, plug your usb to your phone holding volume-
You should be in download mode. If your not in download mode, unplug usb cable.
Hold vol+ and vol- at the same time. Once your connected and your phone is showing download mode run kdz. If it fails the first tine just restart kdz or unplug your phone and re connect it.
Sent from my LG-P705 using XDA Free mobile app
Click to expand...
Click to collapse
Thx Nesh89. I try what you said, still not working. It seems to me that kdz can't recognize my phone properly as well my pc (not show's up at my computer)
So I took some snapshots from the kdz phone info and the device manager. Hopefully you see what's up.
Regards, Ron
Nesh89 said:
you need to download the correct frameware for your phone. And install kdz correctly. If your using a windows pc go to advance settings and under modem disable lg mobile mode and restart your pc.
If you installed kdz correctly on your pc, open in the kdz file run windows enabler if your using windows.
On your phone remove your battery, plug your usb to your phone holding volume-
You should be in download mode. If your not in download mode, unplug usb cable.
Hold vol+ and vol- at the same time. Once your connected and your phone is showing download mode run kdz. If it fails the first tine just restart kdz or unplug your phone and re connect it.
Sent from my LG-P705 using XDA Free mobile app
Click to expand...
Click to collapse
Finally the attachements:
RonvA said:
Finally the attachements:
Click to expand...
Click to collapse
disable android net usb modem,
And use instructions from this tutorial http://m.youtube.com/watch?v=8DcEfvEsbD8
Sent from my LG-P705 using XDA Free mobile app
I own an LG G2, i recently got this phone yesterday from a person on craiglist. Don't worry i didn't pay him i gave him my older phone i dont use anymore. SO This phone is practically stuck in Firmware Update (As i read that post) , i spent about a day and half figuring it out and what happens is that.
I CAN get into recovery its TWRP v2.7.0.0 by Turning off the phone first and then Holding Vol UP, Power, Vol Down at the same time until the LG Logo comes up and then i am still holding them down, and it says Recovery Mode please wait and bam TWRP.
But heres the problem i can't mount my OTG and i can't ADB Sideload. So what do i do from here?? this guy rooted this phone and soft bricked it i think? and he wiped the phone but i also did when i had the chance and wiped it completly via recovery.
The only way i got into "Download Mode" / "Firmware Update" was to take the back cover off and unscrew a few screws on the side and unclip the battery for a few seconds and then plugged it back in and then I held the VOl UP button and plugged my USB into the phone and the other end is in my PC. My phone says "Download Mode please wait" and then prompted with the Firmware Update screen. BUT my pc doesnt detect the phone whatso ever and i've already installed drivers and etc from this forum ( http://forum.xda-developers.com/showthread.php?t=2432476 ) its the 2015 method that i downloaded.
so what do i have to do, i havent tried using different usb cables, the port seems fine to be plugged in since in TWRP it says 84+ so i meant its charging right? help me out guys idk what else to do or flash or anything.
IAmTechFreq said:
I own an LG G2, i recently got this phone yesterday from a person on craiglist. Don't worry i didn't pay him i gave him my older phone i dont use anymore. SO This phone is practically stuck in Firmware Update (As i read that post) , i spent about a day and half figuring it out and what happens is that.
I CAN get into recovery its TWRP v2.7.0.0 by Turning off the phone first and then Holding Vol UP, Power, Vol Down at the same time until the LG Logo comes up and then i am still holding them down, and it says Recovery Mode please wait and bam TWRP.
But heres the problem i can't mount my OTG and i can't ADB Sideload. So what do i do from here?? this guy rooted this phone and soft bricked it i think? and he wiped the phone but i also did when i had the chance and wiped it completly via recovery.
The only way i got into "Download Mode" / "Firmware Update" was to take the back cover off and unscrew a few screws on the side and unclip the battery for a few seconds and then plugged it back in and then I held the VOl UP button and plugged my USB into the phone and the other end is in my PC. My phone says "Download Mode please wait" and then prompted with the Firmware Update screen. BUT my pc doesnt detect the phone whatso ever and i've already installed drivers and etc from this forum ( http://forum.xda-developers.com/showthread.php?t=2432476 ) its the 2015 method that i downloaded.
so what do i have to do, i havent tried using different usb cables, the port seems fine to be plugged in since in TWRP it says 84+ so i meant its charging right? help me out guys idk what else to do or flash or anything.
Click to expand...
Click to collapse
I think the methods leave out that you need to change your phone to com port 41 on device manager > ports in order to be detected. Then you need to unplug it and reconnect to computer when the program shows waiting for device, with the phone in download mode already.
Also, to get to recovery you hold vol down and power, when the LG logo comes up release power and hold it again until the reset screen comes up.
To get to download mode you turn the phone off then hold up while plugging the USB cord in with it connected to pc... This launches download mode.
Sent from my LG-VS980 using XDA Free mobile app
Yoinx said:
I think the methods leave out that you need to change your phone to com port 41 on device manager > ports in order to be detected. Then you need to unplug it and reconnect to computer when the program shows waiting for device, with the phone in download mode already.
Also, to get to recovery you hold vol down and power, when the LG logo comes up release power and hold it again until the reset screen comes up.
To get to download mode you turn the phone off then hold up while plugging the USB cord in with it connected to pc... This launches download mode.
Sent from my LG-VS980 using XDA Free mobile app
Click to expand...
Click to collapse
Well you see man , I cant change anything in Device Manager since my phone isn't being detected. It didn't install drivers fully fully since my phone isnt recognized. Even in TWRP or "Download Mode/ Firmware Update" Nothing happens no drivers installing or anything even but it does boot it up to that point....and its just normal boot up i see the LG logo and my led goes from green to blueish in a smooth transition and it doesnt stop until i turn it off. The method i got into recovery is holding all those buttons down its not a problem for me to get into it. I also have another problem it doesn't seem to want to mount my usb otg by samsung.
what do i do
So i tried the otg route but I can't mount it. I have everything connected and once I go into recovery to mount usb-otg, nothing happens.
I just need some way to get a ROM.zip in my phone
Computer does not recognize my phone.
Stuck at LG logo unless I enter recovery.
Sideload doesnt work.
OTG doesnt work.
I've tried at least 4 different guides with no luck.
Why don't you manually install drivers from online?
ive tried
tzzeri said:
Why don't you manually install drivers from online?
Click to expand...
Click to collapse
ive tried that already and it doesnt list anything from the LG folder.
I realized the phone will say start the adb sideload feature. so, when i put the "abd sideload file.zip" command on my pc i just wait a few minutes and it says daemon not running on port 5037 and then start successfuly and then error :device not found.
it can seem to reognize my device wether its in recovery, or download mode or fastboot mode.
Try again in other pc that has never been conected to an LG Phone before. It can perfectly be a conflict with drivers installed in the OS.
I've tried man
AFter i cleaned the usb port in one of the chats or forums, i waited a day ovbiously without turning on the phone and cleaned the usb port with alchohal and a q tip and i plugged my phone into my computer and my PC detected something but it only says "Unknown Device" everytime no matter what pc i use it says that. nothing else. but before that none of my pcs would detect theirs a phone plugged in at all.
IAmTechFreq said:
AFter i cleaned the usb port in one of the chats or forums, i waited a day ovbiously without turning on the phone and cleaned the usb port with alchohal and a q tip and i plugged my phone into my computer and my PC detected something but it only says "Unknown Device" everytime no matter what pc i use it says that. nothing else. but before that none of my pcs would detect theirs a phone plugged in at all.
Click to expand...
Click to collapse
Might be a problem with the cord
Sent from my Motorola DynaTAC using XDA Free mobile app
tzzeri said:
Might be a problem with the cord
Sent from my Motorola DynaTAC using XDA Free mobile app
Click to expand...
Click to collapse
No there is no problem with your USB cord or port. You need to do following steps.
http://forum.xda-developers.com/showthread.php?t=2432476
https://www.youtube.com/watch?feature=youtu.be&v=g01Pa7cgdSM&app=desktop
Please let me know if you succeed.
All credit goes to #bender_007
Ok, first of all, I was at TWRP recovery trying to flash a 4.4.2 rom with all wiped, but I couldn't and I left the phone turned on in TWRP and I went to buy an otg cable to flash the rom, when I arrived home the screen was black and I can't do nothing, is as the phone were turned off but I can't do nothing, it doesn't turn on, I can't get into any of the 2 modes and when I connect to the computer the phone it says that the computer doesn't recognize my phone, it doesn't appears the charging logo, pls someone can help me? I have an lg g2 D802
TheSkyRay said:
Ok, first of all, I was at TWRP recovery trying to flash a 4.4.2 rom with all wiped, but I couldn't and I left the phone turned on in TWRP and I went to buy an otg cable to flash the rom, when I arrived home the screen was black and I can't do nothing, is as the phone were turned off but I can't do nothing, it doesn't turn on, I can't get into any of the 2 modes and when I connect to the computer the phone it says that the computer doesn't recognize my phone, it doesn't appears the charging logo, pls someone can help me? I have an lg g2 D802
Click to expand...
Click to collapse
Check if you are able to access download mode.
If not, check if you can go to recovery.
If both fails, then follow this guide : http://forum.xda-developers.com/showthread.php?t=2582142
The battery. BTW you don't need the otg USB you can use adb command while on twrp.
Oh yea the twrp used many layer of locking you need to swap again and again
Sent from my LG-D802 using XDA-Developers mobile app