Database Users

[Q] messed up good this time

hi all. need help
i've been playing with different roms for couple of years now on different phones and did not have any problems.
till now that is ....
i have installed Omega 21.1, but from time to time phone would lose gsm data connection so i decided to flash something else.
installed [ROM]KOT49H【4.4.2】AOSP official Google Edition and it was good.
for some, God knows what reason, wanted to try Omega19 (4.3). installed fine but sound was broken. when ever phone used any kind of sound it would start flashing or would freeze or something. Flasing any other rom did not help. and for some reason it does not let me change modem with odin.
Last modem i have installed is XXUEMJ5.
tried to do restore using [GUIDE] Unroot/Unbrick, Flash official stock firmware on Galaxy S4 GT-I9500 & I9505 but Odin would fail with Auth error
tried with Odin 3.47, and 3.07
now i still can install rom but stops in logo loop. tried both Omega and google edition.
pls help

gec said:
hi all. need help
i've been playing with different roms for couple of years now on different phones and did not have any problems.
till now that is ....
i have installed Omega 21.1, but from time to time phone would lose gsm data connection so i decided to flash something else.
installed [ROM]KOT49H【4.4.2】AOSP official Google Edition and it was good.
for some, God knows what reason, wanted to try Omega19 (4.3). installed fine but sound was broken. when ever phone used any kind of sound it would start flashing or would freeze or something. Flasing any other rom did not help. and for some reason it does not let me change modem with odin.
Last modem i have installed is XXUEMJ5.
tried to do restore using [GUIDE] Unroot/Unbrick, Flash official stock firmware on Galaxy S4 GT-I9500 & I9505 but Odin would fail with Auth error
tried with Odin 3.47, and 3.07
now i still can install rom but stops in logo loop. tried both Omega and google edition.
pls help
Click to expand...
Click to collapse
Hi,
Once you have installed a TW 4.4.2 ROM , it installs the latest knox bootloader.
At that point , you cannot downgrade your firmware.
You said you installed [ROM]KOT49H【4.4.2】AOSP official Google Edition and it was good.
Your best bet is to re-install that.
As for the modem , there is a technique which you have to try:
Look HERE
That should help.
BTW , I edited your title

thx. will try that and report back.

nope, still stuck @ logo loop
not sure what more combination to test

tried Omega 21.1 with
Bootloader -> BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_C ERT.tar.md5 and
Modems -> CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_C ERT.tar.md5
but now it does not get to the logo. shows samsung logo and than screen goes blank.

gec said:
tried Omega 21.1 with
Bootloader -> BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_C ERT.tar.md5 and
Modems -> CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_C ERT.tar.md5
but now it does not get to the logo. shows samsung logo and than screen goes blank.
Click to expand...
Click to collapse
Hi,
Did you try the GE ROM?

gec said:
tried Omega 21.1 with
Bootloader -> BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_C ERT.tar.md5 and
Modems -> CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_C ERT.tar.md5
but now it does not get to the logo. shows samsung logo and than screen goes blank.
Click to expand...
Click to collapse
Try to reFlash those Files with Odin then Boot into TWRP mode and Do a full wipe and Install Omega (Inside Omega file there's Fullwipe , Click that and Setup the apps you need) then reboot .Make sure that You have a TWRP recovery^

malybru said:
Hi,
Did you try the GE ROM?
Click to expand...
Click to collapse
nope. cant find anything with that name. could you link it please?

Repulsa said:
Try to reFlash those Files with Odin then Boot into TWRP mode and Do a full wipe and Install Omega (Inside Omega file there's Fullwipe , Click that and Setup the apps you need) then reboot .Make sure that You have a TWRP recovery^
Click to expand...
Click to collapse
thx.
tried it. no success after samsung logo just goes black.

gec said:
nope. cant find anything with that name. could you link it please?
Click to expand...
Click to collapse
Hi,
You said you tried the [ROM]KOT49H【4.4.2】AOSP official Google Edition ,and it worked .
So I figured to try and re-install that one.
The other thing you must do between flashing different ROMS is a full wipe (Cache and data)

yes. that was first thing i tested. at best i get the logo loop.
and yes, i do full data wipe before and after reinstallation of the new rom.
cache wipe only whe requested but in this case done that to.
is there a way to see a boot log or something to see where and why booting stops?

gec said:
yes. that was first thing i tested. at best i get the logo loop.
and yes, i do full data wipe before and after reinstallation of the new rom.
cache wipe only whe requested but in this case done that to.
is there a way to see a boot log or something to see where and why booting stops?
Click to expand...
Click to collapse
The best thing you can do is flash the entire 4.4.2 stock rom via odin.And start from scratch(Recovery/Custom rom) Since you already flashed the newestbootloader (from OMEGA file) .This mean your knox is now triggered and your warranty is now void 0x01.

gec said:
yes. that was first thing i tested. at best i get the logo loop.
and yes, i do full data wipe before and after reinstallation of the new rom.
cache wipe only whe requested but in this case done that to.
is there a way to see a boot log or something to see where and why booting stops?
Click to expand...
Click to collapse
Hi,
Perhaps you should try to find the latest test stock 4.4.2 firmware ( I9505XXUFNA1) and flash it in odin.
Wipe data and cache before and after flashing.
And then wait for the official update.
At least you should have a phone you can use.

following http://forum.xda-developers.com/showthread.php?t=2265477
i've found that there is 4.3 stock image I9505XXUEMKF. downloaded it and tried to install but that did not work.
now this is a noob question but is there a speciffic bootloader, modem or something else i need to flash before flashing this image?
or should i search for 4.4.2 version?
thx

flashing stock 4.3 on current bootloader/modem combination gives me Fail from Odin and Sw. Rev. Check Fail error on the phone.

gec said:
flashing stock 4.3 on current bootloader/modem combination gives me Fail from Odin and Sw. Rev. Check Fail error on the phone.
Click to expand...
Click to collapse
I believe malybru already answer that for you .Thread and Stop experimenting with your Phone because there's a chance that you might bricked your Device or end up with no IMEI.. and Your asking for help/Solution mate so follow their instruction . If not feel free to send your Phone to customer Service for repair.( and Be aware that your warranty is already voided unless your Country is part of EU so Rooting and Flashing don't void your warranty)

Repulsa said:
I believe malybru already answer that for you .Thread and Stop experimenting with your Phone because there's a chance that you might bricked your Device or end up with no IMEI.. and Your asking for help/Solution mate so follow their instruction . If not feel free to send your Phone to customer Service for repair.( and Be aware that your warranty is already voided unless your Country is part of EU so Rooting and Flashing don't void your warranty)
Click to expand...
Click to collapse
So what you mean that if you leave in a country that is part of EU, It doesn't matter if KNOX is triggered? (I life in Holland btw)

KingOfDope said:
So what you mean that if you leave in a country that is part of EU, It doesn't matter if KNOX is triggered? (I life in Holland btw)
Click to expand...
Click to collapse
Click the link on EU mate . And start reading even my provider said that if the knox is already triggered, My phone still have warranty for 2 years as long its a hardware/system problem. But if i break the glass on my phone and such then i dont have any warranty for that..and must pay them for a repair.
Sent from Hell ��

Repulsa said:
I believe malybru already answer that for you .Thread and Stop experimenting with your Phone because there's a chance that you might bricked your Device or end up with no IMEI.. and Your asking for help/Solution mate so follow their instruction . If not feel free to send your Phone to customer Service for repair.( and Be aware that your warranty is already voided unless your Country is part of EU so Rooting and Flashing don't void your warranty)
Click to expand...
Click to collapse
ah, my bad. for some reason i was reading 4.4.2 as 4.2.2
i did follow all other instructions, and i thank you all for them, but still not sure where to go from here.
i know i should stick to 4.4.2 firmware but need to check somehow if bootloader/modem combination that i've install is actually installed.

gec said:
ah, my bad. for some reason i was reading 4.4.2 as 4.2.2
i did follow all other instructions, and i thank you all for them, but still not sure where to go from here.
i know i should stick to 4.4.2 firmware but need to check somehow if bootloader/modem combination that i've install is actually installed.
Click to expand...
Click to collapse
If you already flash the Bootloader from Omega then you can no longer downgrade to 4.3 stock , that's why your Getting Fail (Auth) in Odin Flash the 4.4.2 stock Leak rom for now then if you consider flashing a Custom Rom then ,flash the philz recovery 6.09.2 or TWRP (Dont forget to Nandroid backup EFS and such and then DO A CLEAN WIPE by Wiping cache, dalvik cache data and system) and From recovery flash any Custom rom you like. (no need to root your phone, Your phone will be rooted after flashing any custom rom . So goodluck

[Q] No IMEI and Rom crash issues

Hi all, hope you can help.
I was using an S5 ROM until yestersay and it was perfect. I dont recall the name, but it was from here and it was the one on v4, not v23. So i needed to put the stock ROM back on, but when i did that i started getting problems. The 2 issues i have are;
1) no network, imei, baseband
2) rom got stuck on samsung boot logo, then freezes when eventually loaded
I flashed it the same as i have 100s of times on other phones, factory reset, wipe cache, wipe dalvik. I reinstalled the rom that was working and its the same. I then installed an AOSP ROM and whike that loads and works perfectly, there is still no network/baseband/imei.
I did flash 2 modems last night, but the issues remains.
So, does anyone know how i can ideally get a stock TW ROM working without crashes and get the network back up?

Have you tried restoring your efs backup?
Edit:
Try flashing this -
http://www.mediafire.com/?k32kvbgb2dc9qde
Here is the thread for it -
http://forum.xda-developers.com/showthread.php?t=2507403

Thank you, I will try flashing that, but it does boot with the AOSP ROM.
Sadly i dont have a backup of the efs.

I have just installed another TouchWiz ROM and it also is freezing.
It boots in fine after install, but when the screen is locked, it freezes. From that point on the phone is unresponsive.
Oh, and no network/IMEI of course.
I think I have totally screwed this Note 3, which is mildly annoying.

barrygoddard said:
I have just installed another TouchWiz ROM and it also is freezing.
It boots in fine after install, but when the screen is locked, it freezes. From that point on the phone is unresponsive.
Oh, and no network/IMEI of course.
I think I have totally screwed this Note 3, which is mildly annoying.
Click to expand...
Click to collapse
Hi, no you dont
Just find and flash the correct stock rom from samobile and flash it.
By correct rom i mean the Region version.
I had the same problem a few days ago.

Julian BgSkyTours said:
Hi, no you dont
Just find and flash the correct stock rom from samobile and flash it.
By correct rom i mean the Region version.
I had the same problem a few days ago.
Click to expand...
Click to collapse
Thanks. I am downloading the BTU version, but I'm sure I tried this.
Did you have a freezing ROM or the no service/IMEI thing ... or both?!

barrygoddard said:
Thanks. I am downloading the BTU version, but I'm sure I tried this.
Did you have a freezing ROM or the no service/IMEI thing ... or both?!
Click to expand...
Click to collapse
I had freezing rom and imei Null, and broadband unknown.

OK, that makes me feel quite hopeful!
The ROM has just finished, so I'll install now. Did you just flash with Odin? If so, was it 3.07 or 3.09?

barrygoddard said:
OK, that makes me feel quite hopeful!
The ROM has just finished, so I'll install now. Did you just flash with Odin? If so, was it 3.07 or 3.09?
Click to expand...
Click to collapse
Yes, with ODIN but i dont remember the version. I dont think it is so important for flashing.

Sadly that has not done the trick.
The ROM installed, but when it gets through the set up, there is still no service.
Baseband: Unknown
Network: Unknown
Mobile Network State: Disconnected
Service State: Out of Service
IMEI: Unknown
When I lock the device it's fine, but as soon as I wake and try to unlock, it freezes.
I'm going to have to take it to Samsung, but I guess the first thing they will do is check the warranty
Fark.

I went to the Samsung Experience shop on Oxford Street - they were really helpful
...until they say that the knox had been tripped. Practically pushed me out the door and told me to f*** off.
So, I have a dead Note 3 that won't hold a TW ROM and has no service on any ROM.
Any suggestions would be welcome at this stage!

barrygoddard said:
I went to the Samsung Experience shop on Oxford Street - they were really helpful
...until they say that the knox had been tripped. Practically pushed me out the door and told me to f*** off.
So, I have a dead Note 3 that won't hold a TW ROM and has no service on any ROM.
Any suggestions would be welcome at this stage!
Click to expand...
Click to collapse
One of the thing that will help is to flash as much roms you can. In my case 11 roms. And on the 12th the network comes back.
And there a lot in google and in samobile that you can try.
But flashing as much rom as you can is the best way.
Good Luck

If it's an N9005, it sounds like the issues i was having with my phone when i first installed the S5 Rom.
No matter what i did, or how many times i tried flashing back to stock, it wouldn't work at all, it just kept freezing, lagging, no sound, no baseband/IMEI etc. What fixed it for me was downloading the NH1 Modem and flashing it in ODIN. If when you restart your phone, there is still no baseband/IMEI then restart back into Download mode, flash modem with ODIN but make sure Restart is unticked. When it's flashed, pull the battery out of your phone, then put it back in again. Restart back into download and flash the modem again, but tick auto restart this time. Hopefully you'll be back sorted when the phone restarts.
Get the modem from here: http://forum.xda-developers.com/galaxy-note-3/general/ref-galaxy-note-3-sm-n9005-gsm-modems-t2842806

Brownie2k said:
If it's an N9005, it sounds like the issues i was having with my phone when i first installed the S5 Rom.
No matter what i did, or how many times i tried flashing back to stock, it wouldn't work at all, it just kept freezing, lagging, no sound, no baseband/IMEI etc. What fixed it for me was downloading the NH1 Modem and flashing it in ODIN. If when you restart your phone, there is still no baseband/IMEI then restart back into Download mode, flash modem with ODIN but make sure Restart is unticked. When it's flashed, pull the battery out of your phone, then put it back in again. Restart back into download and flash the modem again, but tick auto restart this time. Hopefully you'll be back sorted when the phone restarts.
Get the modem from here: http://forum.xda-developers.com/galaxy-note-3/general/ref-galaxy-note-3-sm-n9005-gsm-modems-t2842806
Click to expand...
Click to collapse
Thanks dude, hopefully this will work.
What ROM did you use to get thimg going? Ive spent so many hours on this already, want to minimise more wasted time!!

barrygoddard said:
Thanks dude, hopefully this will work.
What ROM did you use to get thimg going? Ive spent so many hours on this already, want to minimise more wasted time!!
Click to expand...
Click to collapse
I flashed the S5 Stock Rom Final 20 (At the time) and all seemed fine. After i'd flashed though, it just didn't seem to recognise my baseband, and no matter how many times i flashed to stock, it wouldn't change anything.
In the end, i flashed the N9005XXUENB7_N9005OXAENB1_BTU Stock Rom, then flashed the NH1 Modem. That kicked my Note 3 back into life and restored IMEI/Baseband. From there, i just flashed the S5 rom back and it was all working fine. I think the modem should kick it into gear no matter what rom you're using though.

Dude. You are a star.
I downloaded the ROM you said, flashed, then flashed the modem the way you said and it works.
Thank you so much.

barrygoddard said:
Dude. You are a star.
I downloaded the ROM you said, flashed, then flashed the modem the way you said and it works.
Thank you so much.
Click to expand...
Click to collapse
You're very welcome pal, glad your Note 3 is back working properly!
You should be good to flash a different Rom and have no issues at all.

hi ..
i am facing problems with my imei..
actually i have done this:
1. rooted the MICROMAX A110Q phone for 1st time using Framaroot app. and installed superSU
2.installed CMW version 5 in phone.
3. performed a complete nandroid backup nd placed it in PC and Ext-Sd card both
4.then following some tutorials i tried to install few custom roms:-
>>1 'COLOUR OS v2' custom recovery..
RESULT= didnt worked (stuck at boot screen)
>>2 'Note 3 rom for canvas 2 plus A110q
RESULT= didnt worked (stuck at boot screen)
5. incresed ROM partition upto 1GB successfully.
6. retry installing 'Note 3 rom for canvas 2 plus A110q'
>>Result = successfully installed.
VALID IMEI
7. i took a Backup of IMEI in mobile uncle tools
saved imei.bak file in PC also.
8. note 3 rom for A110q had some bugs so i tried to install new one..
9. tried to install "ultimate galaxy v3" accidently..
the rom was meant for A110 instead of my A110Q.. nd as a result i found my phone dead or bricked.
10. i followed instructions for unbricking. flashed the phone by SP_TOOLS with micromax canvas 2 original stock rom nd finally found phone back into life..
11. i started my phone all as new nd working..
but.. found an error...
"INVALID IMEI"
12. then i smiled nd simply restored the complete nandroid backup..
still "INVALID IMEI"
13. then i rooted phone nd installed mobile uncle and restored IMEI.bak
still "INVALID IMEI"
14. download imei writer from post in XDA followed instructions but it gives error
"power ON" even if i removed battery..
15. i downloaded MTK tools nd tried to write imei..
but after successfully completing process
still "INVALID IMEI"
i really need immediate help wid that..
both of my sim are off phone became ipod..
nd unable to repair my phone..please tell me some solution
so much thanxx ...in advance ...
Sent from my Micromax A110Q using XDA Premium 4 mobile app

Hey people
4poorv said:
hi ..
i am facing problems with my imei..
actually i have done this:
1. rooted the MICROMAX A110Q phone for 1st time using Framaroot app. and installed superSU
2.installed CMW version 5 in phone.
3. performed a complete nandroid backup nd placed it in PC and Ext-Sd card both
4.then following some tutorials i tried to install few custom roms:-
>>1 'COLOUR OS v2' custom recovery..
RESULT= didnt worked (stuck at boot screen)
>>2 'Note 3 rom for canvas 2 plus A110q
RESULT= didnt worked (stuck at boot screen)
5. incresed ROM partition upto 1GB successfully.
6. retry installing 'Note 3 rom for canvas 2 plus A110q'
>>Result = successfully installed.
VALID IMEI
7. i took a Backup of IMEI in mobile uncle tools
saved imei.bak file in PC also.
8. note 3 rom for A110q had some bugs so i tried to install new one..
9. tried to install "ultimate galaxy v3" accidently..
the rom was meant for A110 instead of my A110Q.. nd as a result i found my phone dead or bricked.
10. i followed instructions for unbricking. flashed the phone by SP_TOOLS with micromax canvas 2 original stock rom nd finally found phone back into life..
11. i started my phone all as new nd working..
but.. found an error...
"INVALID IMEI"
12. then i smiled nd simply restored the complete nandroid backup..
still "INVALID IMEI"
13. then i rooted phone nd installed mobile uncle and restored IMEI.bak
still "INVALID IMEI"
14. download imei writer from post in XDA followed instructions but it gives error
"power ON" even if i removed battery..
15. i downloaded MTK tools nd tried to write imei..
but after successfully completing process
still "INVALID IMEI"
i really need immediate help wid that..
both of my sim are off phone became ipod..
nd unable to repair my phone..please tell me some solution
so much thanxx ...in advance ...
Sent from my Micromax A110Q using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Did you already found a solution? i am stuck on this thing too

Help please

Hello everyone i have a note 3 and it is rooted and has a a kernel flashed on it, now i want to revert back to my stock rom and i know i have to download the software and flash it with odin but i cant find my software anywhere could anyone give me a link to the firmware for my specific device here are its details
build number: N9005XXUDMJ7
CSC:N9005DTUDMJ4
NAME:NOTE 3 N9005
PLEASE HELP ME I WOULD BE REALLY GRATE-FULL TO THE PERSN WHO CAN LEND ME THE LINK I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS BUT I REALLY WANT TO GO BACK TO STOCK PLEASE. THANKYOU

go to sammobile.com and search for your model there

kewlkaka1203 said:
Hello everyone i have a note 3 and it is rooted and has a a kernel flashed on it, now i want to revert back to my stock rom and i know i have to download the software and flash it with odin but i cant find my software anywhere could anyone give me a link to the firmware for my specific device here are its details
build number: N9005XXUDMJ7
CSC:N9005DTUDMJ4
NAME:NOTE 3 N9005
PLEASE HELP ME I WOULD BE REALLY GRATE-FULL TO THE PERSN WHO CAN LEND ME THE LINK I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS BUT I REALLY WANT TO GO BACK TO STOCK PLEASE. THANKYOU
Click to expand...
Click to collapse
Install app called "phone Info" from google store, it will take you to correct firmware as per your country origin.

kewlkaka1203 said:
I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS
Click to expand...
Click to collapse
That shouldn't have failed, CSC mismatch is not a cause of flash failure. Can you provide more details?

Hm...
Hi guys,
I had an issue similar to this and have no recollection what I did to fix it. I don't even think that I fixed it, ever. Meaning - no stock ROM install for me for months and months now.
I just downloaded some AOSP/TW ROM and flashed. Are you able to get to the custom recovery? Please confirm - I've read somewhere that you can flash stock from custom recovery. I did try a few "PIT" files, with no help.
P.S. I remembered a bit now. I was finally able to flash it through Odin, but entered boot loop. So, no go!
My eyes are on this thread.
Good luck,
Sonny B.

details↓↓↓↓
Bulbous said:
That shouldn't have failed, CSC mismatch is not a cause of flash failure. Can you provide more details?
Click to expand...
Click to collapse
Um sorry for the late reply. So what happens is i down the firmware from sammobile sure that it was for my model and build number but the csc was of switzerland different than mine next i flashed the rom from 3 different versions of odin starting from v.3.10 it started saying checking md5 file and it was taking too long and we had lost hope then suddenly it said md5 read succesfully and then brought up another dialouge saying setup connection and then cam up with a fail message usb debugging and all the process was done correctly i know this is a late reply but please reply back if you are there thanks

if....
sonny_b_bih said:
Hi guys,
I had an issue similar to this and have no recollection what I did to fix it. I don't even think that I fixed it, ever. Meaning - no stock ROM install for me for months and months now.
I just downloaded some AOSP/TW ROM and flashed. Are you able to get to the custom recovery? Please confirm - I've read somewhere that you can flash stock from custom recovery. I did try a few "PIT" files, with no help.
P.S. I remembered a bit now. I was finally able to flash it through Odin, but entered boot loop. So, no go!
My eyes are on this thread.
Good luck,
Sonny B.
Click to expand...
Click to collapse
If it was a pass message on odin it shouldve worked go into recovery mode and do a factory reset from there it should work it happened with me too but remember dont leave the phone switched on as its stuck in boot loop cause when the powers dead ur phone wont charge any more it would keep thinking as if its not bieng charged if thats what u did i recommend making a factory cable search it on google and charge from that so the device knows its bieng charged once the wipe data is done reset and hopefully it would work if not i think u should flash another stock rom again i hope i helped

kewlkaka1203 said:
If it was a pass message on odin it shouldve worked go into recovery mode and do a factory reset from there it should work it happened with me too but remember dont leave the phone switched on as its stuck in boot loop cause when the powers dead ur phone wont charge any more it would keep thinking as if its not bieng charged if thats what u did i recommend making a factory cable search it on google and charge from that so the device knows its bieng charged once the wipe data is done reset and hopefully it would work if not i think u should flash another stock rom again i hope i helped
Click to expand...
Click to collapse
Did you solve ur problem?

........
Joku1981 said:
Did you solve ur problem?
Click to expand...
Click to collapse
NO

Hi guys ,
There're three possibilities about the country origin by comparing the data on sammobile.You can try to flash these three versions firmwares.one of them must be correct! Portugal PDA:N9005XXUDMJ7 CSC:N9005OPTDMJ4 SLOVENIA PDA:N9005XXUDMJ7 CSC:N9005OXXDMJ4 POLAND PDA:N9005XXUDMJ7 CSC:N9005PRTDMJ4.download link is also on sammobile.com!
Good luck!
Sent from my SM-N9005 using XDA Free mobile app

Install Phone INFO ★Samsung★ app > Menu > 'Firmware Browser'. Download the firmware for your device and flash it via Odin.

I Need Help Please! PLEASE HELP!

Hello Everyone, i got a note 3 phone
SM-N9005 FCC ID: A3LSMN9005
SSN:- N9005GSMH
MADE IN VIETNAM BY SAMSUNG..
i bought this note 3 phone from UAE and it was with Kitkat 4.4.2 and when i was using it, some apps used to stop and not responding and get a pop-up message "System has stopped" or something like .com.system has stopped responding, also when i open some other apps the phone shuts down, so i turn it on, sometimes it works fine and sometimes it stops responding and shut down many times, so i had to make a full restore factory reset and still have the same problem, some guys told me you have problems with the rom, so i had to look for stock roms to it and found a lollipop rom under this name (AP_N9005XXUGBNL8_CL3643614_QB3415922_REV00_user_low_ship_MULTI_CERT.tar) and i installed samsung usb drivers just to make sure that everything is okay.
so when i started flashing it by odin it said Fail, so i tried once again but failed again, and i found my phone went to that black screen with (firmware upgrade encountered an issue, please select recovery mode in kies & try again), i couldn't get to my previous kitkat rom after that, but i'm able to go to download mode and recovery mode, so after this( brick) i had to search of how to unbrick it so after that i flashed philz as a recovery mode, and then flashed (All samsung recovery.tar) so then after flashing it, that message of (firmware upgrade encountered an issue, please select recovery mode in kies & try again) is gone, but i got another loop of restart each time i open the phone, it is not booting it is only taking me to the black start screen of android, and after a while it restarts itself.. and then when i tried to flash the same rom once again and connected my phone to my computer, drivers started configuring and so i waited to finish, but it failed it said (MTP USB Device Failed), though i still can see the phone connected over Odin in download mode.
so i had to look for another rom which is a kitkat stock version (N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar) which i found after downloading it and flashing it to my phone that it is for n900, which is normally failed flashing!.
so I don't know if i messed things up or not, and i really don't know what else or more to do ?
please give me your advice so i can restore this phone to its original stats.
Thank You!​

Are you sure the first firwmware you flashed is a full stock firmware?. What is the size?.
The second firmware you flashed isn't for n9005. Try different firmware specifially for UAE.
Sent from my SM-G925F using XDA Free mobile app

Rosli59564 said:
Are you sure the first firwmware you flashed is a full stock firmware?. What is the size?.
The second firmware you flashed isn't for n9005. Try different firmware specifially for UAE.
Sent from my SM-G925F using XDA Free mobile app
Click to expand...
Click to collapse
well i found it on a web site also this rom size is (2.304 GB), and it had an additional files with it about more 4 other files to flash with
what do you think?

hlabbad said:
well i found it on a web site also this rom size is (2.304 GB), and it had an additional files with it about more 4 other files to flash with
what do you think?
Click to expand...
Click to collapse
I see. It's a leaked lollipop firmware. Flash again with 4 files except pit. First boot will take some time.

Rosli59564 said:
I see. It's a leaked lollipop firmware. Flash again with 4 files except pit. First boot will take some time.
Click to expand...
Click to collapse
but when i flashed it with big sized file, the flashing process failed, it didn't work!

hlabbad said:
but when i flashed it with big sized file, the flashing process failed, it didn't work!
Click to expand...
Click to collapse
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.

Rosli59564 said:
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.
Click to expand...
Click to collapse
like this shown in the photo

Rosli59564 said:
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.
Click to expand...
Click to collapse
1. Go to Download Mode.
2. Tell me if you can flash this ONE using ODIN. It's the latest for KSA (Country Saudi Arabia).

hlabbad said:
like this shown in the photo
Click to expand...
Click to collapse
Choose corresponding file for BL, AP, CP & CSC. Do not tick repartition. You could also try with the firmware as suggested by joku

hlabbad said:
like this shown in the photo
Click to expand...
Click to collapse
You have repartion ticked but without a pit file, so obviously it will fail.
Sent from my SM-N9005 using Tapatalk

Thanks All for help

Did you solve the problem?

Failed to root

guys I have a problem i tried to root my samsung galaxy note 4 (sm-n910f) and i forget to backup the phone and now i thing the phone doesn't have a rom. I tried to install new rom as tar file with oddin tool but when oddin finish the job i tried to boot the phone but constantly rebooting. Enyone can help me pls???

Did you check and make sure you ODIN the right ROM for your phone? Check the model in the recovery menu vs the one you installed, are they the same?

Yeah i download the correct rom from sammobile and i odin it.
After the installation I remove the phone from my pc and try to boot and the phone won't stop restarting, I change the battery from a friend phone and the phone boot normal I thing the problem is the battery and I order new one.
thx for the quick reply and sorry for my bad english
:crying:

When you do ODIN, did it say successfully completed?
Remove SD Card. Try to do a factory reset in the recovery menu.

ah ok thx a lot i ll do it.!