Database Users

[Q] Windows ADB USB drivers?

After enabling USB debugging on my Nexus 7, I still can't get "adb devices" to list my Nexus 7. I also tried switching its USB connection type from "media" to "camera", to no effect. I have Windows 7; I see a "Nexus" device under Other Devices in my device manager, but when I try to install the Google USB drivers from the Android SDK, Windows refuses to take it.
This is going to make development difficult Anyone know where I can find working USB drivers for Windows 7?

beandog said:
After enabling USB debugging on my Nexus 7, I still can't get "adb devices" to list my Nexus 7. I also tried switching its USB connection type from "media" to "camera", to no effect. I have Windows 7; I see a "Nexus" device under Other Devices in my device manager, but when I try to install the Google USB drivers from the Android SDK, Windows refuses to take it.
This is going to make development difficult Anyone know where I can find working USB drivers for Windows 7?
Click to expand...
Click to collapse
If you have updated the drivers from the SDK, then your problem is probably coming from the cable.
PS: Try not to use an extension cable

When I have had this problem in the past I have found that installing PDA net solves it.
Sent from my Galaxy Nexus using Tapatalk 2

download a sync software,for example,chinese use 360 mobile assistant,it will help you to connected with PC
Sent from my SHW-M190S using xda premium

i got the problem too,just install 360 mobile assistant ,it worked.but i dont know ,any mobile assistant
used in your city？
Sent from my SHW-M190S using xda premium

You may try to use device manager to solve the issue.:
Firstly please connect your Nexus 7 to you computer using the USB cable
included in the box.
Then on the tablet,
choose "Settings" -> "Storage" -> open the menu -> choose "USB computer connection" -> choose "MTP" or "PTP".
On your computer,
1. Control Panel -> Hardare and Sound -> View devices and printers
2. Click on Nexus.
3. Click on "Hardware" tab
4. Click on "Properties"
5. Click on "Change settings"
6. Click on "Driver" tab
7. Click on "Update drivers".
I'd suggest that you repeat these steps for both "MTP" and "PTP" connection types mentioned above.
Then on your computer, run "adb devices", the Nexus 7 would be listed in the
output of the adb command.
Enjoy.

Works with PTP mode - MTP mode doesn't
just for future reference...
By default it uses the MTP mode for USB. ADB is not working in this mode, even after i follow all the steps in above post.
Change it to use PTP (Camera mode), and ADB works !! go figure.

driving me crazy too.
First, windows did not recognize the thing in AdB mode. I managed to get around that with PDA net. But in cmd mode running "fastboot oem unlock" it just sits there saying "waiting for device". Also switched to both usb modes under "storage" as well as tried all usb ports on my pc (running Win 7 64bit). Using original cable.
Any other clues on what to do next?

bytecollektr said:
driving me crazy too.
First, windows did not recognize the thing in AdB mode. I managed to get around that with PDA net. But in cmd mode running "fastboot oem unlock" it just sits there saying "waiting for device". Also switched to both usb modes under "storage" as well as tried all usb ports on my pc (running Win 7 64bit). Using original cable.
Any other clues on what to do next?
Click to expand...
Click to collapse
ADB and fastboot may have two different drivers, this is the case with most other devices.
Anywho here's a link to the all inclusive driver bundle. Drivers was one of the reasons I only use a linux distro these days.

Unlawful said:
ADB and fastboot have two different drivers.
Anywho here's a link to the all inclusive driver bundle. Drivers was one of the reasons I only use a linux distro these days.
Click to expand...
Click to collapse
Still nothing. Deleted the drivers, and it obviously installed the new ones, since the name under the "device manager" changed. I go to the Android sdk and it still says waiting for device. Is there different versions of fastboot? Maybe its the wrong command? (fastboot oem unlock)

reddweb said:
just for future reference...
By default it uses the MTP mode for USB. ADB is not working in this mode, even after i follow all the steps in above post.
Change it to use PTP (Camera mode), and ADB works !! go figure.
Click to expand...
Click to collapse
This is how i got my ADB drivers to actuallly work right!! listen to this guy.

Nexcellent said:
This is how i got my ADB drivers to actuallly work right!! listen to this guy.
Click to expand...
Click to collapse
I have it in that mode, and it does not do anything, even with the new drivers.

bytecollektr said:
I have it in that mode, and it does not do anything, even with the new drivers.
Click to expand...
Click to collapse
Oh and fastboot is not available during normal operations and it has to be booted into the bootloader to use fastboot. Try using adb reboot bootloader and then when it restarts fastboot oem unlock.

I'm in the exact same situation
I'm having the same problem. I'm not exactly sure how to use the Naked Drivers pack. Can someone advise?

Easy as ADB...
Use the step by step instructions in the Nexus Root Toolkit found here;
http://forum.xda-developers.com/showthread.php?t=1766475
Hope that helps,
-CC

Set it to ptp mode, install updated sdk, and you will find proper adb driver in extras/google/usb-driver directory. After those steps adb started to work in my case' no need for third party downloads.
Sent from my Nexus 7 using xda app-developers app

I've been having the same issues with all of the new android devices I've tried to use adb on my computer for. I as able to make them work by manually installing the drivers in device manager. When you choose browse for drivers manually you can look through pre installed drivers and select adb interface and manually choose the drivers for adb and fast boot. Only issue I have is that it won't give adb root access and says rot is not available in production builds. Not sue if that's related or not.
Sent from my Nexus 7 using xda app-developers app

Windows 7 - Nexus 7 ADB Recognition
For me, like others, choosing either MTP or PTP from the Nexus 7's USB computer connection options didn't solve the issue. Updated to the latest version of the Android SDK Tools within Eclipse [version 20.0.1], and even uninstalled and re-installed the Google USB Driver [Revision 6] within the Android SDK manager, but no luck.
What ended up clearing the issue for me was to go to Computer Management, find the Nexus device with the question mark next to it, update the driver by browsing a location on the computer, browse to the location on your computer where you saved the Android SDK [the one with the following directories: add-ons, docs, extras, platforms, platform-tools, etc], and choose that very folder containing those folders I mentioned. It should search for a while then ask you whether or not to install some Asus/Google driver.
After installing that driver, my N7 was recognized by the "adb devices" command.
NOTE: Turns out when I updated the driver, my N7 was in PTP mode, and when I switched it to MTP mode, it was no longer recognized under adb devices. adb kill-server then adb start-server should get it recognized again when you switch between MTP and PTP.
Hope this works for all of you out there, like me, who really didn't want to take the 3rd party software route to overcome this problem.
Cheers.

ADB driver
Try to root toolkit from Wugfresh
http://forum.xda-developers.com/showthread.php?t=1766475
There is a very complete and usable guide to install ADB driver for most version of windows (XP->win 7).
You don't have to unlock or root; just use the interactive guide for driver install.
Good luck
bytecollektr said:
Still nothing. Deleted the drivers, and it obviously installed the new ones, since the name under the "device manager" changed. I go to the Android sdk and it still says waiting for device. Is there different versions of fastboot? Maybe its the wrong command? (fastboot oem unlock)
Click to expand...
Click to collapse

rootblock said:
For me, like others, choosing either MTP or PTP from the Nexus 7's USB computer connection options didn't solve the issue. Updated to the latest version of the Android SDK Tools within Eclipse [version 20.0.1], and even uninstalled and re-installed the Google USB Driver [Revision 6] within the Android SDK manager, but no luck.
What ended up clearing the issue for me was to go to Computer Management, find the Nexus device with the question mark next to it, update the driver by browsing a location on the computer, browse to the location on your computer where you saved the Android SDK [the one with the following directories: add-ons, docs, extras, platforms, platform-tools, etc], and choose that very folder containing those folders I mentioned. It should search for a while then ask you whether or not to install some Asus/Google driver.
After installing that driver, my N7 was recognized by the "adb devices" command.
NOTE: Turns out when I updated the driver, my N7 was in PTP mode, and when I switched it to MTP mode, it was no longer recognized under adb devices. adb kill-server then adb start-server should get it recognized again when you switch between MTP and PTP.
Hope this works for all of you out there, like me, who really didn't want to take the 3rd party software route to overcome this problem.
Cheers.
Click to expand...
Click to collapse
i'm having the issue with the mtp not being recognized in adb. can you be more specific in the adb kill-server and adb start-server.

Remote Debugging?

So I can't get my phone to remote debug in chrome. Every time I issue the adb forward tcp:9222 localabstract:chrome_devtools_remote my device is not found...
I tapped on the build number in about phone to enable the dev options. I selected USB debugging in developer tools as well as chrome but its still not working.
Has anyone been able to get this to work? I have searched around and can't find anything about the nexus 4 and remote debugging.

What does adb devices say?

Just says list of devices attached and doesn't show anything.
When I plug in my phone I know it is detected, it shows up as Nexus 4 in windows explorer.
I don't get it...

Your drivers aren't installed properly.
1. Ensure USB debugging is enabled (as you said it is... but double check anyways)
2. http://forum.xda-developers.com/showthread.php?t=1514942 use those drivers instead. follow the steps there.

zephiK said:
Your drivers aren't installed properly.
1. Ensure USB debugging is enabled (as you said it is... but double check anyways)
2. http://forum.xda-developers.com/showthread.php?t=1514942 use those drivers instead. follow the steps there.
Click to expand...
Click to collapse
Thanks, it was the driver.

bowenac said:
Thanks, it was the driver.
Click to expand...
Click to collapse
Hit the thanks button if I helped thanks very much

[Q] mtp vs ptp

Please help if you can
My first 32gb Nexus 7 had no problems showing up as an mtp device on windows 7.
Am running a rooted 4.1.2 and all is well with mtp as well as adb, toolkits, etc.
I purchased one more as a gift, and that one can only be set to ptp in the internal storage settings.
If I try to set it to mtp, it takes, but does not show up in windows or in adb.
The only way to see it or use adb or a toolkit on it, is to set it to ptp which shows up as a camera with read only permissions.
Both tablets are using the same rom etc.
Have tried this on 2 PC's (win 7 as well as xp)
Any Ideas?
Thanks

On my (rooted) Stock 4.2.1 tablet, MTP mode only seems to show up if ADB Debugging is enabled.
Sort of odd; PTP will work whether or not ADB Debugging is turned on, but MTP only shows up when ADB debugging is also enabled.
If you have not enabled "Developer Options" on the tablet, go to
Settings->About tablet
and tap on the last entry ("Build number") 6 or 7 times in succession. This will allow the following menu item to appear under settings:
Settings-> {} Developer options
You can enable ADB debugging from there.
The PTP/MTP toggle control is at
Settings -> Storage -> Menu (top RH corner) -> USB Computer connection
good luck

MTP vs PTP
bftb0 said:
On my (rooted) Stock 4.2.1 tablet, MTP mode only seems to show up if ADB Debugging is enabled.
Sort of odd; PTP will work whether or not ADB Debugging is turned on, but MTP only shows up when ADB debugging is also enabled.
If you have not enabled "Developer Options" on the tablet, go to
Settings->About tablet
and tap on the last entry ("Build number") 6 or 7 times in succession. This will allow the following menu item to appear under settings:
Settings-> {} Developer options
You can enable ADB debugging from there.
The PTP/MTP toggle control is at
Settings -> Storage -> Menu (top RH corner) -> USB Computer connection
good luck
Click to expand...
Click to collapse
Thanks, but I guess I was not very clear.
ADB Debugging is turned on but only works in PTP mode.
MTP does not work at all, even though it's checked.

ganovim said:
Thanks, but I guess I was not very clear.
ADB Debugging is turned on but only works in PTP mode.
MTP does not work at all, even though it's checked.
Click to expand...
Click to collapse
Even after reading this and your 1st post, I am still a little uncertain.
I *think* you are saying that you want to get MTP working on the second unit. And I *think* you are also saying that (additionally) ADB only seems to work when you have PTP mode selected.
Reading between the lines - are you testing things with the same computer for both tablets? (Or, another way to put that, if the answer to this previous question is no, do you see any "Unknown Device" messages in the Device Manager when you toggle things around?)
I fooled around with mine not more than 30 minutes ago. Leaving it plugged into the PC the entire time (Win 7 Pro x64), I could toggle USB Debugging on/off and back and forth between PTP/MTP. Although I didn't actually try a live ADB session in both MTP/PTP modes, the file browser thing would pop up for PTP mode no matter what I had ADB debugging set to, and for MTP mode that would only happen if I had ADB debugging enabled. At no time did I see any unrecognized devices in the Device Manager.
And I think that what I just said above doesn't help you.... arghh.

MTP vs PTP
bftb0 said:
Even after reading this and your 1st post, I am still a little uncertain.
I *think* you are saying that you want to get MTP working on the second unit. And I *think* you are also saying that (additionally) ADB only seems to work when you have PTP mode selected.
Reading between the lines - are you testing things with the same computer for both tablets? (Or, another way to put that, if the answer to this previous question is no, do you see any "Unknown Device" messages in the Device Manager when you toggle things around?)
And I think that what I just said above doesn't help you.... arghh.
Click to expand...
Click to collapse
First of all thanks for the interest.
Bottom line is as follows.
MTP mode does not work period.
However....
when I boot into recovery, (TWRP) the pc sees the usb connection, and I can use adb commands.
So it leads me to conclude that there is something off in the System files. But (and it's driving me nuts)
they are a clone of the first (MTP functioning) Nexus 7.
Thanks again

@OP
You can uninstall the drivers(all of the n7 drivers), then unplug, then replug it in, then let it install its drivers again. This solved the mtp issues other users had.

Nexus 4 cannot be recognized as MTP after root

I'm running Windows 7 64bit and followed the Ultimate guide to unlock and root my Nexus 4.
Everything went well but now it looks like that Windows won't recognize my phone as a device. When I plug in the phone, the auto-play window will pop out and recognize it as Nexus 4, but there is no other options. (Normally the auto-play will ask if open folder to view files or transfer photos). I can't see my phone in device manager either.
If I turn on the USB debugging mode, I can see it in device manager but still cannot see it in My Computer. Looks like Windows can't access the SD card at all.
I tried switching to the camera mode but the problem remained. Please help.

desperate bump. can anyone help?

Maybe it's a stupid advice, but have you tried change the USB port in PC?

glancer2315 said:
desperate bump. can anyone help?
Click to expand...
Click to collapse
Plug in the phone, uninstall the drivers from Device manager, then unplug, and replug.

Colourkey said:
Maybe it's a stupid advice, but have you tried change the USB port in PC?
Click to expand...
Click to collapse
yes, i did.

abaaaabbbb63 said:
Plug in the phone, uninstall the drivers from Device manager, then unplug, and replug.
Click to expand...
Click to collapse
thanks for your advice. the problem is that, without USB debugging mode on, I can't see Nexus 4 in Device manager, even though the Windows Auto-play will say Nexus 4 connected. (Nothing in My Computer either)
With USB debugging mode on, I uninstalled the driver and Windows would try installing the driver. Now it shows up as MTP device with an exclamation mark. I tried manually update the driver (direct it to the Google SDK folder and pick the android_windowsusb.inf) but it says it does not support x64. I don't think the 64 bit driver is digitally signed.

I think I had a similar problem as yours. If you deleted the drivers while on debugging mode and reconnected after and it's showing the exclamation mark of a unknown device, try restarting your computer and plugging your phone back in.

SovereigN7 said:
I think I had a similar problem as yours. If you deleted the drivers while on debugging mode and reconnected after and it's showing the exclamation mark of a unknown device, try restarting your computer and plugging your phone back in.
Click to expand...
Click to collapse
i did and it remains the same.
Is there anyway I can know all the files names of the drivers so that I can manually delete them from system folder? When I uninstalled it from the device manager, I don't see the option "Delete the driver software for this device".
I can still see it under "adb devices" list.

I think there are some conflicts in the drivers.
Now when I connect Nexus 4 (without USB debugging mode on), it will show up in device manager under Android Device.
With USB debugging, it will then show up under Portable Devices.
However, it's supposed to work the other way around. that is (no USB debugging --> portable device; with USB debugging --> Android Device).
How can i solve this?

Have you tried manually installing the drivers before plugging in the phone, vs letting windows choose the drivers it wants to install? One option you could try is installing PDA Net on your pc. It will install reliable drivers on your pc.

i also had this same problem after flashing my first custom rom on the n4, and i also run windows 7 Ultimate x64
here is the process i use for full clean installation of device
on phone
goto SETTINGS > STORAGE > (menu) USB Computer Connection
make sure Media Device (MTP) is checked
With USB Debugging On
On your PC go to device manager
there should be 2 devices (Android Phone > Android Composite ADB Interface & Portable Devices > Nexus 4) - this is on a fully working n4 so you might only have 1 of them
Right click on each of them and click uninstall
The popup box should have another check box to delete the driver also, if this is available check it then confirm (note mine only has the box for Android Phone > Android Composite ADB Interface, but if yours has it on both then check it on both)
your computer will now ask you to restart, dont do it yet
repeat previous step for the other device if you have 2 then reboot
upon rebooting it will automatically start reinstalling drivers
by expanding the selection you should see 2 devices
Nexus 4 - Successful - Ready To Use (this is your MTP connection)
Nexus 4 - Unsuccessful - No Driver Found (this is your ADB Connection)
at this point you should be able to access internal storage however ADB will not work
go back into device manager
you should now have
Portable Devices > Nexus 4
and Other Devices > Nexus 4 (with yellow exclamation mark)
right click on the Other Devices > Nexus 4 (with yellow exclamation mark)
hit Update Driver Software
click Browse my computer for driver software
click Let Me Pick Drom a List of Device Drivers On My Computer
double click Show All Devices
click Have Disk...
click Browse
navigate to the download directory for the google usb drivers (for me this was "C:\Program Files (x86)\Android\Android-SDK\Extras\Google\Usb_Driver")
double click on the android_winusb.inf file
click OK
double click "Android Composite ADB Interface"
it will then install the driver for ADB
you should now have full access to internal storage and ADB

Alex240188 said:
i also had this same problem after flashing my first custom rom on the n4, and i also run windows 7 Ultimate x64
here is the process i use for full clean installation of device
on phone
goto SETTINGS > STORAGE > (menu) USB Computer Connection
make sure Media Device (MTP) is checked
With USB Debugging On
On your PC go to device manager
there should be 2 devices (Android Phone > Android Composite ADB Interface & Portable Devices > Nexus 4) - this is on a fully working n4 so you might only have 1 of them
Right click on each of them and click uninstall
The popup box should have another check box to delete the driver also, if this is available check it then confirm (note mine only has the box for Android Phone > Android Composite ADB Interface, but if yours has it on both then check it on both)
your computer will now ask you to restart, dont do it yet
repeat previous step for the other device if you have 2 then reboot
upon rebooting it will automatically start reinstalling drivers
by expanding the selection you should see 2 devices
Nexus 4 - Successful - Ready To Use (this is your MTP connection)
Nexus 4 - Unsuccessful - No Driver Found (this is your ADB Connection)
at this point you should be able to access internal storage however ADB will not work
go back into device manager
you should now have
Portable Devices > Nexus 4
and Other Devices > Nexus 4 (with yellow exclamation mark)
right click on the Other Devices > Nexus 4 (with yellow exclamation mark)
hit Update Driver Software
click Browse my computer for driver software
click Let Me Pick Drom a List of Device Drivers On My Computer
double click Show All Devices
click Have Disk...
click Browse
navigate to the download directory for the google usb drivers (for me this was "C:\Program Files (x86)\Android\Android-SDK\Extras\Google\Usb_Driver")
double click on the android_winusb.inf file
click OK
double click "Android Composite ADB Interface"
it will then install the driver for ADB
you should now have full access to internal storage and ADB
Click to expand...
Click to collapse
thank you for your long and detailed reply.
this is what i wanted to do, but the problem is that when I uninstall them, I don't get to see the option "delete the driver software for this device". What should I? cuz every time I plug in Windosws just tries to automatically install the driver for me.

Have you tried toggling to ptp mode then back to mtp on your phone. It's odd indeed.
The fact that you can't remove the driver is because that is the mtp one which is built in to media player. Let me give this some more thought
EDIT: You said that with USB debugging disabled your device is listed under device manager as an android device
can you check and verify exactly what it is listed as? as it should be portable device
Sent from my Nexus 4 using xda app-developers app

Alex240188 said:
Have you tried toggling to ptp mode then back to mtp on your phone. It's odd indeed.
The fact that you can't remove the driver is because that is the mtp one which is built in to media player. Let me give this some more thought
EDIT: You said that with USB debugging disabled your device is listed under device manager as an android device
can you check and verify exactly what it is listed as? as it should be portable device
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
hi under android device it shows up as Android adb device
under portable device i can it now showing up as MTP USB device with exclamation mark.

glancer2315 said:
hi under android device it shows up as Android adb device
under portable device i can it now showing up as MTP USB device with exclamation mark.
Click to expand...
Click to collapse
does adb work?
i.e. adb devices
or is USB debugging turned off at this point
Also. The one with the exclamation mark. Right click and go to properties. What does it say in device status

Alex240188 said:
does adb work?
i.e. adb devices
or is USB debugging turned off at this point
Also. The one with the exclamation mark. Right click and go to properties. What does it say in device status
Click to expand...
Click to collapse
hi, adb devices works. (will list my device when usb debugging is on)
with usb debugging off, under portable device, the device status says "This device cannot start. (Code 10)". thanks.

still looking for solutions. maybe i should try uninstalling the ADB driver, but the problem is that when i uninstall the device from the device manager I don't see the option "delete the driver software for this device", any help?

glancer2315 said:
still looking for solutions. maybe i should try uninstalling the ADB driver, but the problem is that when i uninstall the device from the device manager I don't see the option "delete the driver software for this device", any help?
Click to expand...
Click to collapse
I have this same issue I'm trying to find a fix, that's how I found your thread. Alex gave very good info make sure you go back to his posts and hit his "Thanks" button, I did it on everyone one of his posts in this thread. I'm starting to think it's a hardware issue and not a software issue, I've never had this issue on any device. When I got it new running stock 4.2.2 MTP didn't work. ADB works and PTP works, just not MTP no matter what I try. I recommend you learn to use, ADB push and pull to move your files if you don't already know how to use it (To use ADB I need to check PTP for it to work and not MTP) you might need to do the same. I will keep you posted if I find a fix.
Sent from my Nexus 10 Pimpin AOKP 4Life

I'm just getting more and more confused with this.
If Adb works then you must have an Adb driver installed for the phone. However your also stating that you get no box for uninstall driver.
With USB debugging disabled you said that it appears as an android phone rather than a portable device. This should not be.
With debugging disabled what happens if you Try to uninstall in device manager
Sent from my Nexus 4 using xda app-developers app
---------- Post added at 01:54 PM ---------- Previous post was at 01:51 PM ----------
My theory still stands that you have updated the mtp driver with adb drivers. Hence why mtp doesn't work but ptp does.
The problem is getting to a position where you can uninstall the adb drivers from the mtp device and let it reinstall the proper drivers
Sent from my Nexus 4 using xda app-developers app

I plugged another Nexus 4 in, and all the drivers loaded perfectly. I then tried my Nexus 4 phone, and nothing happens. No mtp, no adb, no boot loader drivers. Its my phone. My next step is to find a zip file that I can flash via custom recovery, which will bring all the binaries and ROM back to stock. Anybody know where I can find this? I'll probably lose the custom recovery, but hopefully it will be fixed and I can flash the custom recovery again.
LG-E960

USB storage not showing up in windows

Anyone else with problems seeing the storage after plugging into PC? adb command works and device drivers installed. Found another forum where turning the usb from MTP to charging and back under developer options does the trick. I have a non stock ROM and seeing if fresh out of the box experiences the same thing.

I have the same issue and can't seem to figure out how to get it to work. My work around has been to use ES File Explorer and open Remote Manager.
Edit: I just plugged it in again to see what I can find. I turned off USB Debugging and Developer Options. Plugged in and pulled the notification bar down, there is an option to change USB Settings to Charging, Power Supply, File Transfers (this works), Photo Transfer and MIDI. Give it a go!

rramey23 said:
I have the same issue and can't seem to figure out how to get it to work. My work around has been to use ES File Explorer and open Remote Manager.
Edit: I just plugged it in again to see what I can find. I turned off USB Debugging and Developer Options. Plugged in and pulled the notification bar down, there is an option to change USB Settings to Charging, Power Supply, File Transfers (this works), Photo Transfer and MIDI. Give it a go!
Click to expand...
Click to collapse
I am running to the exact same problem.
I have tried with USB Debugging off AND on, still no go. I think there's a problem with installing the drivers. Whenever I check the device manager, it still says the drivers weren't installed. I have tried installing the Google drivers. What do we do?!

Kandydish said:
I am running to the exact same problem.
I have tried with USB Debugging off AND on, still no go. I think there's a problem with installing the drivers. Whenever I check the device manager, it still says the drivers weren't installed. I have tried installing the Google drivers. What do we do?!
Click to expand...
Click to collapse
Need to get the drivers to install first and foremost. Even with USB Debugging on, I'm still able to pull down and change from charge only. Those drivers are key. I had to restart my computer before it was able to take the install.

rramey23 said:
Need to get the drivers to install first and foremost. Even with USB Debugging on, I'm still able to pull down and change from charge only. Those drivers are key. I had to restart my computer before it was able to take the install.
Click to expand...
Click to collapse
I'm able to get to the pulldown and change the setting from charging to MTP. Every time I do that, I get a window showing that I'm installing the drivers for Nexus 6P. Then it completes. I can do this over and over again. In the device manager, there's a little exclamation mark by the Nexus 6P and says these drivers weren't installed Code 28. I have exhausted Google to no avail!
Anyone find a solution to this?

Kandydish said:
I'm able to get to the pulldown and change the setting from charging to MTP. Every time I do that, I get a window showing that I'm installing the drivers for Nexus 6P. Then it completes. I can do this over and over again. In the device manager, there's a little exclamation mark by the Nexus 6P and says these drivers weren't installed Code 28. I have exhausted Google to no avail!
Anyone find a solution to this?
Click to expand...
Click to collapse
You chose to install the drivers manually instead of having the system do it for you? Right click the yellow exclamation .. update drivers .. allow me to pick .. choose the download file location see what that gives you.

zosimov21 said:
You chose to install the drivers manually instead of having the system do it for you? Right click the yellow exclamation .. update drivers .. allow me to pick .. choose the download file location see what that gives you.
Click to expand...
Click to collapse
When I choose the location, I see a bunch of options. The most relevant ones are ADB Interface and Android Device. Under Android Device there are several more options such as Android Adapter Interface, Android Bootloader Interface, and the such; no mention of MTP.

Kandydish said:
When I choose the location, I see a bunch of options. The most relevant ones are ADB Interface and Android Device. Under Android Device there are several more options such as Android Adapter Interface, Android Bootloader Interface, and the such; no mention of MTP.
Click to expand...
Click to collapse
Did you already download the google USB drivers?
Should just be able to choose the android_winusb.inf driver. It should allow MTP

zosimov21 said:
Did you already download the google USB drivers?
Should just be able to choose the android_winusb.inf driver. It should allow MTP
Click to expand...
Click to collapse
I have downloaded them. How do I specifically choose just that file? When I go through updating the driver, it asks for a folder location.

Go to dev options, switch the USB from ptp back to mtp and it works for me

xxsashixx said:
Go to dev options, switch the USB from ptp back to mtp and it works for me
Click to expand...
Click to collapse
Tried. Keeps trying to install the MTP drivers and it won't go through.

I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet

bartendersimon said:
I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet
Click to expand...
Click to collapse
I don't have any other drivers from any other devices. This is a clean install of Windows 8.1. I've only tried connecting my 6P, my OG 6, and my 9. All have the exact same problem.

Kandydish said:
I don't have any other drivers from any other devices. This is a clean install of Windows 8.1. I've only tried connecting my 6P, my OG 6, and my 9. All have the exact same problem.
Click to expand...
Click to collapse
You might wanna try installing Huawei Drivers and see if that help
HiSuiteSetup_2.3.55.1.zip
http://download-c.huawei.com/downlo...loadId=16205&version=90864&siteCode=worldwide

bartendersimon said:
You might wanna try installing Huawei Drivers and see if that help
HiSuiteSetup_2.3.55.1.zip
http://download-c.huawei.com/downlo...loadId=16205&version=90864&siteCode=worldwide
Click to expand...
Click to collapse
I installed that application and I was able to see my device, the apps, the contacts, everything. EXCEPT I wasn't able to access the device from Windows Explorer which means I am not able to transfer files.

Kandydish said:
I installed that application and I was able to see my device, the apps, the contacts, everything. EXCEPT I wasn't able to access the device from Windows Explorer which means I am not able to transfer files.
Click to expand...
Click to collapse
So when you change the option in the phone from charging to file transfer, did you check the device manager to see if there any unknown device showing somewhere?

bartendersimon said:
So when you change the option in the phone from charging to file transfer, did you check the device manager to see if there any unknown device showing somewhere?
Click to expand...
Click to collapse
Changing it from charging to MTP shows a MTP device in Manager with a yellow exclamation mark next to it. When looking into the details, it says that no drivers are installed. When I try "Updating Drivers", it says "Windows failed to install drivers. Code 28" or something along those lines. Code 28 MEANS that Windows failed to install drivers.
Thanks for nothing Microsoft.

Nexus 6p Connection to PC Issue - This Helped!
I had similar problems with PC not recognising my Device. I found http://www.technobuzz.net/install-google-nexus-6p-usb-drivers/ which helped me solve my issues.
1. Downloaded and installed the Huawei Nexus 6p drivers. This installed a Huawei Task Manager which connection to pair was still not recognisable.
2. Deleted old drivers (acer, samsung, htc) from' Device Manager'. This actually helped PC recognise my device which showed up in the Device Manager>Other Devices>Nexus 6p, also in PC interface but once moved off charging to MTP, computer didnt recognise device.
3. Downloaded and installed the adb/fastboot installer. Followed instructions till step 10. My screen didn't show anything like Andoid ADB interface, it displayed MTP file install, which I installed. Just remember to refresh in My PC interface when changing over from charging to MTP, sometimes Nexus 6p will be hidden.
4. Uninstalled the Huawie Task Manager.
This has solved my problem with PC and Device connection. The instructions given are from what I can recall of the process I went through.
Credit to Sidharth Rathore from Technobuzz for this solution.
Hope this helps.
Later.
p.s. I have a windows 10 laptop if this helps.

bartendersimon said:
I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet
Click to expand...
Click to collapse
I was having the same issue until I uninstalled some other debugging drivers I had installed. So I would recommend crawling through your installed apps for any other android usb drivers and uninstalling them if you still have this issue.

Working on mine right now. Found that USB 3.0 ports will not recognize device. Once plugged into a 2.0, it is recognized. Might help your issue