hi,
Recently I wanted to install a custom rom onto my Acer A501 tablet. I looked up a bunch of guides in this forum and found a very common flash guide made by blackthund3r, so I went and followed the proper guidelines given here: http://forum.xda-developers.com/showthread.php?t=1622425. Everything worked fine until I got to the part where the A500 APX Flash Utility was suppose to detect my tablet in APX mode but it can't.
I've installed the Acer Composite ADB driver found here: http://downloads.rurouniserver.com/...driver-download-v1000524-android-32-honeycomb. (Version 1.0.10.0).
Someone else on the forum suggested here (http://forum.xda-developers.com/showthread.php?t=1660313) that we must install the google adb driver instead but I can't seem to get it to work either.
I desperately need help or advice on how to get the A500 APX Flash utlity to detect my tablet.
Sometimes it just hangs, also only runs with ics roms. if both sets of drivers are correctly installed u should see an apx device listed in device manager on ur pc. What os r u using...if all else fails just use the manual nvflash method instead
Sent from my GT-I9300 using Tapatalk 4
when I set my tablet into apx mode the screen is dark but the power button is on. I don't see any apx devices listed in my device manager and the composite adb driver disappears after setting into apx mode.
I'm running windows 7 ultimate x64 on as my OS.
Run the manual method instead but in saying that, if an apx device isn't listed. ..uninstall and reinstall the drivers
Sent from my GT-I9300 using Tapatalk 4
night8388 said:
when I set my tablet into apx mode the screen is dark but the power button is on. I don't see any apx devices listed in my device manager and the composite adb driver disappears after setting into apx mode.
I'm running windows 7 ultimate x64 on as my OS.
Click to expand...
Click to collapse
Hi
I thought I got the same situation like you.
I use blackthund3r's apx flsh 0.41. Everything goes well:
.........................extracting resources
.........................Starting ADB Server
.........................Enter APX Mode
.........................Wait 5 Seconds.....
.........................Killing ADB Server
and then, no matter how many times I press the "Done! Press to run again", I CANNOT go into the APX mode again.
at this time, the a500 screen is black.
I run another adb screen on PC, and found no device list.
But when I re-open the a500, I can detect the device.
Now my a500 cannot go into the recovery node, but it can work normally.
Anyone can help me to figure out what happened?:crying:
uzni said:
Hi
I thought I got the same situation like you.
I use blackthund3r's apx flsh 0.41. Everything goes well:
.........................extracting resources
.........................Starting ADB Server
.........................Enter APX Mode
.........................Wait 5 Seconds.....
.........................Killing ADB Server
and then, no matter how many times I press the "Done! Press to run again", I CANNOT go into the APX mode again.
at this time, the a500 screen is black.
Click to expand...
Click to collapse
apx mode is black screen and power lite is on - carry on with the flash!
I run another adb screen on PC, and found no device list.
Click to expand...
Click to collapse
When you are in apx mode - adb is not available -
Check the drivers are correctly installed correctly.
..put yr tab in apx mode,
(sometimes its easier to do this via the buttons, theres plenty of posts on how to do it, do quick search)
you should hear the new hardware detected sound in windows...
then go todevice manager or the safely remove hardware icon in your system tray and look to see if an "apx device" is listed there...
if it is, then carry on and flash the bootloader and recovery.
See the apxFlash pictorial in my sig for a step by step if you still have troubles
But when I re-open the a500, I can detect the device.
Click to expand...
Click to collapse
Do you mean you can view your tabs files from windows???
This is why you need both sets of drivers! acers and androids (you need the android-sdk installed too, but if you have used the mini-sdk zip from my guide then you don't need the full sdk kit)
Remember, if you can view files you cannot be in apx mode and vice versa...its one or the other
There can be driver issues with 64bit win 7/8 PC's. XP or Win 7 work best.
Reinstalling Acer drivers can help too.
Now my a500 cannot go into the recovery node,
Click to expand...
Click to collapse
No it won't if you have not completed the flash!
dibb_nz said:
apx mode is black screen and power lite is on - carry on with the flash!
When you are in apx mode - adb is not available -
Check the drivers are correctly installed correctly.
..put yr tab in apx mode,
(sometimes its easier to do this via the buttons, theres plenty of posts on how to do it, do quick search)
.........
Click to expand...
Click to collapse
OK, I upload 2 pictures for better explain.
01.jpg:
A500 power led light = on
U see, apx flash tool CANNOT go into the APX mode.
My notebook can see APX device
I set another window for adb devices, and found nothing.
02.jpg:
Set A500 power off and on. (manually)
do not touch apx flash tool window.
My notebook can not see APX device (while off).
My notebook can see "MTP" device (while on).
I set another window for adb devices, and found device code.
Now I can run A500 normally.
==================
Then, I click "Done! Press to run again" on the apx flash tool window,
It will become the "01.jpg"
Like an endless loop.:crying:
Could you help me?
Yup sometimes the tool does that.
Try again , when Windows detects the apx device just click the blue arrow anyway, let's see wot happens
Sent from my HTC_PN071 using Tapatalk
dibb_nz said:
Yup sometimes the tool does that.
Try again , when Windows detects the apx device just click the blue arrow anyway, let's see wot happens
Sent from my HTC_PN071 using Tapatalk
Click to expand...
Click to collapse
Many thanks for your suggestion, and I will try your plan tonight.
dibb_nz said:
Yup sometimes the tool does that.
Try again , when Windows detects the apx device just click the blue arrow anyway, let's see wot happens
Sent from my HTC_PN071 using Tapatalk
Click to expand...
Click to collapse
Sorry for my late response. Please check the attached pics for reference.
I ignore the wrong message and go forward. and then, I stuck on the 03.jpg over 1 hour...
and I open another adb screen, please see 04.jpg.
Does this help you recognize my problem? what should I do now? Please give me some advise.
It doesn't look good
Pls download the babsector.rar file. It's in post 2 of the root guide in my Sig along with the instructions. Run the bat file and post the output pls
Sent from my HTC_PN071 using Tapatalk
dibb_nz said:
It doesn't look good
Pls download the babsector.rar file. It's in post 2 of the root guide in my Sig along with the instructions. Run the bat file and post the output pls
Sent from my HTC_PN071 using Tapatalk
Click to expand...
Click to collapse
many thanks for your suggestion, and I will try it later.
dibb_nz said:
It doesn't look good
Pls download the babsector.rar file. It's in post 2 of the root guide in my Sig along with the instructions. Run the bat file and post the output pls
Sent from my HTC_PN071 using Tapatalk
Click to expand...
Click to collapse
Ya! I finally install your bootloader successfully!
Your "babsector.rar " is wonderful.
I had install a new rom for my old A500. Thanks very much.
uzni said:
Ya! I finally install your bootloader successfully!
Your "babsector.rar " is wonderful.
I had install a new rom for my old A500. Thanks very much.
Click to expand...
Click to collapse
Yes babsector is a tabsaver!!! I can't take the credit for it as it came from someone in the Russian forums but it does a very good job. Pleased u got up n running again
Sent from my HTC_PN071 using Tapatalk
I think I am in a similar predicament here. My a500 has an SOS checksum error, and is not detected by windows as an APX device. None of the tools listed see my tab. ANy advice?
sharkguy said:
I think I am in a similar predicament here. My a500 has an SOS checksum error, and is not detected by windows as an APX device. None of the tools listed see my tab. ANy advice?
Click to expand...
Click to collapse
Yr tab must be have drivers correctly installed and be in apx mode for Windows to detect it. use XP, Vista, win7 32bit. Issues on 64bit and win8
Run babsector.rar file as above.
Sent from my HTC_PN071 using Tapatalk
Oh, Thanks dibb, will give that a try! Only have a VM win XP so I hope that works...
sharkguy said:
Oh, Thanks dibb, will give that a try! Only have a VM win XP so I hope that works...
Click to expand...
Click to collapse
Yerrrr...ok.good luck with that..try manual nvflash I.e. babsector(not the manual option in the tool) Will work when the tool won't.
Sent from my HTC_One using Tapatalk
Scratch that. I guess what I will be using is a VM version of WIN7 32bit. not that it makes all that much of a difference. Just thought I would keep you informed, lol.
Gave up for the night. Can't seem to get the USB devices to show in my VM. will attempt a fresh install of lower OS in the morning. thanks again.
Sent from my SGH-I317M using xda app-developers app
Related
Hi,
I have a bricked TF101 and the only thing I can do is to power the tablet into "NVIDIA USB Boot-recovery driver for Mobile devices" mode (Widows 7)
Can you please explain me how to restore any android rom to have a functional asus transformer?
Thank you
Jxx7 said:
Hi,
I have a bricked TF101 and the onlyh thing I can do is to power the tablet into "NVIDIA USB Boot-recovery driver for Mobile devices" mode (Widows 7)
Can you please explain me how to restore any android rom to have a functional asus transformer?
Thank you
Click to expand...
Click to collapse
A couple questions for you.
1. you are absolutely sure you cannot access recovery mode?
2. What is the serial number of your tablet. If you don't know it should be on a sticker near where you plug the usb/charging cable in.
Nairbly said:
A couple questions for you.
1. you are absolutely sure you cannot access recovery mode?
2. What is the serial number of your tablet. If you don't know it should be on a sticker near where you plug the usb/charging cable in.
Click to expand...
Click to collapse
Thank you for reply,
The only thing I can do is to see "NVIDIA USB Boot-recovery driver for Mobile devices" in my devices management (Windows 7).
I guess I'm in recery mode because when I try to flash with NVflash I read "Entering Nvflash recovery mode" on my tablet.
Serial: B50KAS05....
Jxx7 said:
Thank you for reply,
The only thing I can do is to see "NVIDIA USB Boot-recovery driver for Mobile devices" in my devices management (Windows 7).
I guess I'm in recery mode because when I try to flash with NVflash I read "Entering Nvflash recovery mode" on my tablet.
Serial: B50KAS05....
Click to expand...
Click to collapse
Hey, i just also bricked my B50 as a noob in the Asus table world..lol..learning stuff..etc....
just go to this link:
http://forum.xda-developers.com/showthread.php?t=1620758
download the nvflash rom then unzip and click "download.bat" and it will automatic load the rom and you will good to go, back to stock.
theres also a great step by step nvflash video on youtube you should dowload and use as you are doing the procedure..
you cant go wrong then..
Sent from my Transformer TF101 using Tapatalk
dg...maybe you can help me out, the video was very confussing I could never get those 3 files the person was talking about, since i have a b50 and can use nvflash I been reading I can just use that to upload any custom rom. Is that correct?. The problem I am having is I dont know how or what files after unziping custom roms to use or put where etc...to nvflash the custom rom.
Unknown Zone said:
Hey, i just also bricked my B50 as a noob in the Asus table world..lol..learning stuff..etc....
just go to this link:
http://forum.xda-developers.com/showthread.php?t=1620758
download the nvflash rom then unzip and click "download.bat" and it will automatic load the rom and you will good to go, back to stock.
Click to expand...
Click to collapse
Thank you, I'm french so I need to find the good nvflash rom
Jxx7 said:
Thank you, I'm french so I need to find the good nvflash rom
Click to expand...
Click to collapse
No problem, good luck...I wish rooting this tablet was as easy as rooting my GS2. It is like going back to school and having homework
Unknown Zone said:
No problem, good luck...I wish rooting this tablet was as easy as rooting my GS2. It is like going back to school and having homework
Click to expand...
Click to collapse
I have an old model so it seems to be easy to root
I just found an ICS nvflash rooted rom so I hope the next step will be the last!
just incase you need it..
vipermode rooting kit..
http://forum.xda-developers.com/showthread.php?p=21007398
I am going to have to do it in a few days on a new B60..
so mostaswell post the link here for you guys..
Sent from my Transformer TF101 using Tapatalk
Thanks bro!
So I have the acer a500 with the stock ics and rooted. i was using my tablet just fine last night and later on went to use it again and now its stuck on the acer screen. i have tried the resets for recovery aND IT does not work. its still stuck on the acer screen. can anyone help me? please. my tablet is the gen2 when i received the ics update if that helps. and as mentioned it was fine until last night. is there a way i can reinstall it with the sd card? i would love the stock image if possible.
Wrong forum section.
nishka256 said:
So I have the acer a500 with the stock ics and rooted. i was using my tablet just fine last night and later on went to use it again and now its stuck on the acer screen. i have tried the resets for recovery aND IT does not work. its still stuck on the acer screen. can anyone help me? please. my tablet is the gen2 when i received the ics update if that helps. and as mentioned it was fine until last night. is there a way i can reinstall it with the sd card? i would love the stock image if possible.
Click to expand...
Click to collapse
Download a stock acer image and place it on a MicroSD under the name of update.zip then boot into recovery
But yes it is the wrong forum section - should be in Q&A doesn't bother me too much but it irritates devs because it's the development forum
Sent from my Iconia A500 using Tapatalk 2
ok
hi, thank you, please im not good at this. can you tell me a link for the stock? and tell me how do i boot it?
thank you
so can anyone direct ne to a sstock zip file of ics for the gen2 acer a500 tablet that works. i have no idea how my tablet got messed up. its stuck on the acer screen. ive tried so many things. i have tried the reset pinhole button, i have downloaded a lot of zip files or roms and tried to do the volume, power button and all i get is a robot with red triangle. i cannot use usb because my computer wont read it not even after downloading drivers. anyone help me please?
nishka256 said:
so can anyone direct ne to a sstock zip file of ics for the gen2 acer a500 tablet that works. i have no idea how my tablet got messed up. its stuck on the acer screen. ive tried so many things. i have tried the reset pinhole button, i have downloaded a lot of zip files or roms and tried to do the volume, power button and all i get is a robot with red triangle. i cannot use usb because my computer wont read it not even after downloading drivers. anyone help me please?
Click to expand...
Click to collapse
I'm not sure what may have happened but the easiest way to fix your tab is to downgrade back to HC using an acer utility called an "EUU". you will need your cpuid for this so i hope you have saved it somewhere.
Look here for 'jazzyjames' tutorial How to rollback to HC - for instructions on how to do this and a link to timmydeans HC EUU - also take a look thru my cpuid post (link in sig) for loads of info and links and even how to get yr cpuid if u dont have it
thanks i tried it and follow instructions numerous times. evry time i get to the step where it says "entering acer download mode on my tablet" on the EUU program on my laptop it says it "failed" so i try and try again with the same results. im running out of options. i dont know what to do.
maybe give this a shot. I've never had to use it myself but it's probably worth a shot.
How to unbrick your tablet -
http://forum.xda-developers.com/showthread.php?t=1699277
oh heck that doesnt sound too good, i've not heard of the actual EUU "failing" guess thats the result of the usb issue you spoke of!
The "update.zip" method, you have 2 choices here See this thread for all the Official Acer Stock Roms - Ensure you download a "Full" rom and not just one of the update packages....instructions are in the first post...
You need to extract the update.zip and it may need to be decrypted as I said instructions for all this are in the OP!!
method2 - I've tried this once!! I got pretty frustrated real quick. Its a buggy chinese rom - took me a good hour to finally get into flashing a recovery, but it did work and plenty of others
have posted success with it... drkalo has a guide right here
Failing that m8 yr options are very, very few...
Try on a different computer so we can rule that out...or not!
or try to troubleshoot the usb issue....there are the only 2 ways via sdcard or pc/usb...
thinking about it now, in your post you said
"i cannot use usb because my computer wont read it not even after downloading drivers. anyone help me please?"
Not sure I follow, wouldnt have thought you'd get all that way to download mode without USB drivers to begin with.
You have debugging enabled in settings and you connect your cable to your pc but your tab does not show up on your PC in Device Manager???
Are you still on the stock bootloader??what about recovery??
this is what comes up
this is what comes up after trying this methid
nishka256 said:
this is what comes up after trying this methid
Click to expand...
Click to collapse
So this window that pops up saying 'failed' and with instructions to go into apx mode - did u do this? what happened after you did it?
I haven't seen this particular error but normally with the downgrade process you do not have yr tab connected UNTIL you see the "cant detect your iconia tab" window (with similar instructions to enter apx mode manually) did you see this window at all? you do not enter your cpuid until AFTER you have put yr tab in apx mode and connected to yr PC, then the green status bar shows and then you should see "Congratulations".
To check you are in apx mode your tab screen is black and the power light is ON.
Now before you connect yr tab to yr PC open up Device Manager (pc) so you can make sure the apx/usb driver loads when you connect the cable - it will show under "USB Controllers". Once you can confirm the drivers are installed then you should be all good
The drivers are a bit of a pain as there are different ones for each different 'mode' of your tab i.e
USB driver that allows you to see the contents of yr tab from yr PC
ADB driver that allows yr tab and pc to communicate by sending commands to yr tab via yr PC
APX Driver which you normally only see while running HC, but yr PC can sometimes report an error with the "apx device" if the drivers have not installed properly
Acer Boot/Recovery Driver which NEEDS to be installed for any type of nvflash or EUU flash to be successful
Fastboot Driver if you have flashed bootloader v3 up this driver will load when you enter "Fastboot"
This is why folks have trouble with drivers and why we keep telling them "reinstall the drivers!!!" The Acer drivers from acer support AND the Google adb drivers which you can get from the first post of my cpuid thread (link in sig) the zip also has the fastboot drivers and saves you having to download the full android sdk. Having device manager OPEN while attempting any type of flash definitely helps you see whats happening - or not - driver wise...
As the title states my ASUS TF101 B70 model is stuck in APX mode it will not go into recovery and i can not get ADB to see it. I have searched to no end trying EasyFlasher, Peri and Nvflasher. When using Wheelie it will go to partion 4 and hang up. It will show 2 lines on the screen but nothing else. I have also left it for hours so it is hanging up. I have used the naked drivers and i have also tried the asus sync drivers. Thanks in advance.
tboost said:
As the title states my ASUS TF101 B70 model is stuck in APX mode it will not go into recovery and i can not get ADB to see it. I have searched to no end trying EasyFlasher, Peri and Nvflasher. When using Wheelie it will go to partion 4 and hang up. It will show 2 lines on the screen but nothing else. I have also left it for hours so it is hanging up. I have used the naked drivers and i have also tried the asus sync drivers. Thanks in advance.
Click to expand...
Click to collapse
you need a good computer to do it
Hit the 'thanks' button if it helps
I would suggest trying a different SBK version. B70's - some are SBK1, some are SBK2.
EasyFlasher has both SBK's built right into it when you open it up. Try one, then try the other.
TheMrcool212 said:
you need a good computer to do it
Hit the 'thanks' button if it helps
Click to expand...
Click to collapse
What makes a computer good. I have tried it on 3 computers. Xp home,Vista and windows 8 machines.
frederuco said:
I would suggest trying a different SBK version. B70's - some are SBK1, some are SBK2.
EasyFlasher has both SBK's built right into it when you open it up. Try one, then try the other.
Click to expand...
Click to collapse
I have tried both SBK 1 and 2. SBK 1 is the one that will show some signs of formatting.
tboost said:
I have tried both SBK 1 and 2. SBK 1 is the one that will show some signs of formatting.
Click to expand...
Click to collapse
If EasyFlasher, NVFlash or other APX tools, my guess is that there is a hardware issue with your motherboard or flash memory and it cannot be fixed.
Does TF101 or TF101G ? If TF101G B70+ can't use adx or nvflash only adb
Envoyé depuis ma TF101G-B80 with Revolution HD 4.0 (3.6g release) by Mike _1986
After trying to upgrade my ROM, I'm stuck at the ACER logo screen. I've tried about every ROM listed the the developer forum and none of them work. So now I'm trying to use the "afterota" tool.
I hold the reset button and power on and the tablet goes into "APX" mode and the Win7 machine sees it. But the Win7 machine can't find an APX driver for it. I've tried the USB driver from the ACER site but apparently that is for the ADB mode. When I run "afterota" there is an option to "Install Driver" but that doesn't work either.
I've searched google till I'm ready to pull out my hair and can't find a solution. Anyone know how solve this?
lewmur said:
After trying to upgrade my ROM, I'm stuck at the ACER logo screen. I've tried about every ROM listed the the developer forum and none of them work. So now I'm trying to use the "afterota" tool.
I hold the reset button and power on and the tablet goes into "APX" mode and the Win7 machine sees it. But the Win7 machine can't find an APX driver for it. I've tried the USB driver from the ACER site but apparently that is for the ADB mode.
Click to expand...
Click to collapse
2 sets of drivers. Acers and adb/fastboot drivers.
When I run "afterota" there is an option to "Install Driver" but that doesn't work either.
Click to expand...
Click to collapse
R u running ICS stock ota rom. Afterota will only work with that firmware.
I've searched google till I'm ready to pull out my hair and can't find a solution. Anyone know how solve this?
Click to expand...
Click to collapse
You must use nvflash based tool to get fixed ....an EUU or v8 bootloader flash will do
See links to guides and drivers in my sig
Sent from my GT-I9300 using Tapatalk 4 Beta
dibb_nz said:
2 sets of drivers. Acers and adb/fastboot drivers.
R u running ICS stock ota rom. Afterota will only work with that firmware.
You must use nvflash based tool to get fixed ....an EUU or v8 bootloader flash will do
See links to guides and drivers in my sig
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I made some progress. I got the V7-UNL-ICS-HC-bootloader-MULTI-cwm.zip, which had the driver and I now have "Nvidia USB Boot-recovery driver for Mobile devices" installed. It also has nvflash and several other apps. I read the link you have for getting the CPUID, but have to admit that it just throughly confused me. Also read through the nvflash help but it seems I need a config file to do anything with it and that seems to require the CPUID.
Any suggestions on where I go from here?
lewmur said:
I made some progress. I got the V7-UNL-ICS-HC-bootloader-MULTI-cwm.zip, which had the driver and I now have "Nvidia USB Boot-recovery driver for Mobile devices" installed. It also has nvflash and several other apps. I read the link you have for getting the CPUID, but have to admit that it just throughly confused me. Also read through the nvflash help but it seems I need a config file to do anything with it and that seems to require the CPUID.
Any suggestions on where I go from here?
Click to expand...
Click to collapse
You MUST have yr cpuid....there are 8 methods in the guide. .if u cannot boot at all or have no nandroid it is difficult but not impossible. .see srbeens guide in general forum using linux to retrieve yr cpuid/sbk....dont try ANY flash or repair with win8, it wont work...win7, xp or linux only
Sent from my GT-I9300 using Tapatalk 4 Beta
dibb_nz said:
You MUST have yr cpuid....there are 8 methods in the guide. .if u cannot boot at all or have no nandroid it is difficult but not impossible. .see srbeens guide in general forum using linux to retrieve yr cpuid/sbk....dont try ANY flash or repair with win8, it wont work...win7, xp or linux only
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I tried the Linux method using a Mint 15 64bit box. I created the apx file without any errors but when I ran it, it got this error "Syntax error: Unterminated quoted string". I posted my error in the thread above this one and am hoping eppeP can tell me what's wrong.
BTW, I did check using lsusb that my tab was connected at 0955:7820
Hi,
I have an Acer A500 that I'm trying to resurrect after my son tried to root the device. I'm new to this and have checked many sites in search for a solution to this issue (if possible). I'm not sure what all my son did to this device so please bear with me. After reviewing several posts I find my issue unique where as some members may have simular issues I still have not been able to isolate my issues.
The issue: The device is stuck in APX mode with a black screen.
1) The Power Button does illuminate when powered "On" but the screen is "black". There is NO vibration when turned on.
2) The Battery life is good on this device.
3) When the device is powered "On" and connected to my PC the "Blackthund3r A500 manager" display "A500 connected in APX mode. Please Install drivers!"
4) Using Ubuntu I was able to get the "CPUID" and with "SBCalc_v1.1" I was able to get the "SBK".
5) Performing a startup utilizing reset button and On button has no effect
6) Going to "On" with the Vol + pressed has no effect
7) Using "AfterOTA 1.09" on the first "Info" tab under "Tablet Information" it displays Driver "OK driver installed", under USB it displays "ERROR - connect USB cable and enable USB debugging". Everything else displays "waiting for connection". Pressing "Reconnect Tablet" has no effect.
So far that's all I have been able to do to this unit with NO success. I welcome any feedback on this issue.
bricked tablet
best bet is to use babsector
it will install recovery and unlocked bootloader and format all the partions back to default
then you can flash updated recoveries roms etc, from there
freightyard said:
best bet is to use babsector
it will install recovery and unlocked bootloader and format all the partions back to default
then you can flash updated recoveries roms etc, from there
Click to expand...
Click to collapse
Thanks for your response. I'm not familiar with that with that program. Will it work even though the other programs show the device not being connected? (I've Used several USB cords with the same result). Where can I get that program?
you will need to install the acer usb drivers to your pc
if it's win 8/10 then you will need to first disable signature enforcement
http://forum.tegraowners.com/viewtopic.php?f=10&t=2196
babsector is a simple forum search
I complied with the driver settings and still no joy. The device stays in the APX mode and nothing seems to helps on connecting the tablet to the PC. Is there any script that will manipulate the tablet setting for connecting using Ubuntu?
can you give the steps you used to obtain the cpuid? im stuck with a black screen. have ubuntu installed on a virtual system, when i run the command for apx the file that comes back does not have the cpuid.
cpuid
Drcharles24 said:
can you give the steps you used to obtain the cpuid? im stuck with a black screen. have ubuntu installed on a virtual system, when i run the command for apx the file that comes back does not have the cpuid.
Click to expand...
Click to collapse
You can recover the CPUID by following the instructions at this link http://forum.xda-developers.com/showthread.php?t=2096826
You can then convert your CPUID to SBK with the app here http://forum.xda-developers.com/showthread.php?t=1810618
tower107 said:
You can recover the CPUID by following the instructions at this link http://forum.xda-developers.com/showthread.php?t=2096826
You can then convert your CPUID to SBK with the app here http://forum.xda-developers.com/showthread.php?t=1810618
Click to expand...
Click to collapse
thanks for the reply. i was already trying out all of those guides. it didn't work at first but i changed a few lines of coding and it worked!!! i was using a 32bit ubuntu, made the suggested changes and also added a different line elsewhere. if anyone needs the apx.c file i used with all the changes already made. let me know.