Database Users

How to change "Model Number

Been trying to access some info from the "My Account" app and says my phone model is not supported. I think its due to the change in model number in the about phone section. Anyway to change it back to what it was before?
Btw im running CM 5.0.8
Edit: Reason for editing: On the "Model Number" part, its says HTC Dream, I wanted to change the text string back to what it use to be so I fully use the my account app.

old post, but I would like to know where/what I need to do to change the model also. I can't update via my sammy i9000 via Kies, because it's reading as a GT-I9000 after installing a Euro 2.2 ROM, when it's infact a GT-I9000T.. which Kies now has a New Zealand 2.2 update for. The issue is the 3G support of the Euro ROM and the fact it makes my screen on first power up do the rainbow snow deal. I'm hoping the NZ ROM for the actual 9000T will fix this... but I need to change the device model # to test.
The Kies registry patch trick didn't work for me at all. I would run the app, it would appear to change the registry keys, but Kies would either add another set of 3 keys (4, 5, 6) or just change the 1, 2, 3 modified reg keys to what the phone is reporting instead of keeping the modified info.
Any help would be greatly appreciated

/system/build.prop

i am carllindsay, i was surfing to know that, thanks for sharing a nice thread.

dhkr123 said:
/system/build.prop
Click to expand...
Click to collapse
How do you open /system/build.prop? I use ASTRO and can't open it. Is there any editing app that can open any extension?

general-tso said:
How do you open /system/build.prop? I use ASTRO and can't open it. Is there any editing app that can open any extension?
Click to expand...
Click to collapse
You could rename it to .txt, edit, change to .prop.
Or you could adb pull, edit, push ect.

never mind. I have SGS Tools app that lets me edit /system/build.prop without renaming it. SGS Tools is available on the Market for free.
for those who don't know what SGS Tools is, you're missing a lot! Try it.

general-tso said:
for those who don't know what SGS Tools is, you're missing a lot! Try it.
Click to expand...
Click to collapse
For anyone who actually knows how to use a computer.... no, they're not missing ANYTHING. The terminal is FAR more powerful than any nonsense like that.

[Q] Droid X flashed to cricket, need help!!!!

Can someone please get me started. I just bought a Droid X from Verizon, and had it fully flashed to cricket.
When I got home, I updated it to android 2.3.3 the latest version. I now cant figure out how to root my phone. Can someone give me the order I need to do things in?
Any help would be much appreciated!

if u updated it to gb ota ur screwed... there is no way to root gb yet. u r going to have to sbf back to 2.2 then reflash ur phone and reroot it. look in the wiki for the FULL sbf. if u want gb then u r going to have to use the prerooted gb also linked in the wiki. good luck n have fun.
Sent from my DROIDX using the XDA mobile application powered by Tapatalk

oh yea 2.2 is .340 sbf. if u paid to have ur dx rooted then u should get qpst 2.7.323 and cdma workshop and also hw virtual serial port, read the guide floating around on xda dx forum and u can do it urself.
Sent from my DROIDX using the XDA mobile application powered by Tapatalk

Thanks for replying.
I had the zio with cricket, and we know how that goes. Talking about it makes me vomit.
So I traded an old xbox 360 for a droid x with bad esn from verizon. I paid 75 bucks to have it flashed to cricket. When I got home I checked for update first, not knowing the consequences. So now I fear if I restore and install prerooted update I will lose my flash, and need a solid walkthrough to feel I can do it myself. There is so much info and varibles from carriers etc that Im afraid Im looking at a lot of bad guides too. I can only be as good as a walkthrough directs me. I also fear having 64 bit windows could cause an issue. Can anyone either confirm or deny 100% if restoring will clear my cricket flash?
All input and suggestions on this would be very helpful. Really cant afford to put more money then I already have on this. If anyone could post me specific links to my needs, I may gather enough courage to try. Especially if you have used one personally, and can suggest a degree of difficulty. I must get this rooted, I HATE ADS AND SYSTEM APPS!!!! Thanks again!

You will have to sbf and then reflash it back to.cricket. check out this site http://www.mycricketforum.com/veriz...cricket-2-2-froyo-talk-text-mms-internet.html
Sent from my DROIDX using XDA App

This is indeed one of the links I looked at. So this is the method to flash it, can you post a link on how to restore it to 2.2, so I can flash it, then root it, then I also need to be sure I know how to install the prerooted 2.3.3 for it. Thanks again!

bigshotrob22 said:
You will have to sbf and then reflash it back to.cricket. check out this site http://www.mycricketforum.com/veriz...cricket-2-2-froyo-talk-text-mms-internet.html
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Ok, so everything has been good til now and this is where im stuck at #17. QPST doesnt recognize my phone, there for I cannot proceed. Please someone help!!!.
7) Open up CDMA Workshop 2.7
8) Under COM Settings (AT Mode) select the COM port you setup from the tutorial and then click the connect button. If it successfully connected it will say Connected to COM15 port successfully. on the bottom (may not say COM15, thats just the port I used.)
9) Go to the Security tab and under SPC there will be an empty box. Enter 000000 then click the SPC button and Send. It will then popup saying SPC is correct. Phone unlocked.
10) Now go to the Other tab. Under PRL click Write and browse to where you put that PRL from earlier.
11) Go to the NAM tab and in the MIN and MDN(Dir_Number) boxes enter in the info you got from cricKet customer service and click write.
12) Now go to the Memory tab. Under NV Items click Write. Browse and select the NV Item file you generated earlier. Once its done it will say 12 NV Items were successfully written to the phone.
13) Go to the Main tab. Click Mode>Reset
14) Your phone should have reset. Once it boots backup make sure to get your COM port back up and running.
15) You may now close CDMA Workshop 2.7 and open QPST
16) Open QPST Service Programming
17) You should see your phone listed in the list. Select it, click Start Clients>Service Programming. When it opens select your phone and click OK in the Service Programming screen.
18) On the bottom left click a button labeled Read from Phone, a box will popup, there should be 000000 already typed in, click OK. this may take a few minutes. There will be a blue progress bar on the top. Go smoke a cigg.

LOWCOUNTRYDAVE said:
Ok, so everything has been good til now and this is where im stuck at #17. QPST doesnt recognize my phone, there for I cannot proceed. Please someone help!!!.
7) Open up CDMA Workshop 2.7
8) Under COM Settings (AT Mode) select the COM port you setup from the tutorial and then click the connect button. If it successfully connected it will say Connected to COM15 port successfully. on the bottom (may not say COM15, thats just the port I used.)
9) Go to the Security tab and under SPC there will be an empty box. Enter 000000 then click the SPC button and Send. It will then popup saying SPC is correct. Phone unlocked.
10) Now go to the Other tab. Under PRL click Write and browse to where you put that PRL from earlier.
11) Go to the NAM tab and in the MIN and MDN(Dir_Number) boxes enter in the info you got from cricKet customer service and click write.
12) Now go to the Memory tab. Under NV Items click Write. Browse and select the NV Item file you generated earlier. Once its done it will say 12 NV Items were successfully written to the phone.
13) Go to the Main tab. Click Mode>Reset
14) Your phone should have reset. Once it boots backup make sure to get your COM port back up and running.
15) You may now close CDMA Workshop 2.7 and open QPST
16) Open QPST Service Programming
17) You should see your phone listed in the list. Select it, click Start Clients>Service Programming. When it opens select your phone and click OK in the Service Programming screen.
18) On the bottom left click a button labeled Read from Phone, a box will popup, there should be 000000 already typed in, click OK. this may take a few minutes. There will be a blue progress bar on the top. Go smoke a cigg.
Click to expand...
Click to collapse
You have to open QPST configuration and add new port. Select the port you created with HW Virtual Serial Port.

Ok, I have reflashed official foyo, flashed my phone to cricket with I believe everything in working order. Afterwards, I installed the prerooted gingerbread with success! My service has been suspended I believe because my bill was due. So Ill go pay it then ensure everything is working. I can still text, although I have no 3g symbol but I assume because my service is suspended. Will post my results in a bit!
Thanks to everyone who provided guidance and courage

if gb doesnt work out then get cyanogen. i had problems with the prerooted gb not charging correctly. i havent heard of anyone else having that problem though.
Sent from my DROIDX using the XDA mobile application powered by Tapatalk

Invalid Key when rooting

is anyone else having this issue? we're typing in the serial # and beta key perfectly. we're not mistaking O's for 0's; 1's for I's, or anything. we are indeed choosing Windows and HTC Evo 4G on the website. we're doing everything absolutely perfect but it's still giving us an invalid beta key.
we're on hardware version 4.

learn how to copy and paste into command prompt.

we're doing that, still no go. absolutely nothing is working.

Double check the S/N that reports when you start the tool, just to make sure you are entering the same alpha/numeric the phone reports to the program. Use that S/N to generate your key.
I've been rooting phones all morning, hardware 003 and 004 with no problems at all.

Same here, I've done 3 today, with not a single problem to report.

cnstarz said:
is anyone else having this issue? we're typing in the serial # and beta key perfectly. we're not mistaking O's for 0's; 1's for I's, or anything. we are indeed choosing Windows and HTC Evo 4G on the website. we're doing everything absolutely perfect but it's still giving us an invalid beta key.
we're on hardware version 4.
Click to expand...
Click to collapse
From where are you getting your serials?

Deleted message

having the same issue can not get it to work at all i have tried it all!

the same
I got 2 rooted yesterday. and the one I was trying to do today, did not take at all..something is wrong somewere..

CMD
I dont know how comfortable you are with CMD but, What I did was use CMD prompt navigate to the folder and .exe for the revolutionary tool. Put in the command copy and then pasted it from the website. I put my folder on the desktop
Like this
CMD.EXE
CD users\whatever your name is here\desktop\what ever the folder name is
then revolutionary.exe
it launched found the phone and i pasted in what was needed by mouse and pressed enter and then the magic happened. Mileage may vary happy rooting

I had the same problem. You have to use the same key as provided with the download u can't download the program and go back for the key
Sent from my finally rooted EVO

I had this same problem, everything going smooth until running the revolutionary.exe and pasting the Beta key. Seems when you go to the revolutionary site for the key, the file that gets downloaded is attached to the key, so go ahead and unzip the file to your c: location again and when it asks, just copy and replace all the files and go through the steps and it should accept the Beta key this time and finish, it did for me. I hope this helps.

do you have the latest rev exe....there is a ver4 out.......

oski252 said:
do you have the latest rev exe....there is a ver4 out.......
Click to expand...
Click to collapse
That has to be the problem that I was having along with most of everything getting the error.
They/I was using version 3 revolutionary with the Key gen that's basically set for version 4.
No way for a old version to confirm key gen that isn't built in that tool.

This is the solution!
jokerinhand1119 said:
I had the same problem. You have to use the same key as provided with the download u can't download the program and go back for the key
Sent from my finally rooted EVO
Click to expand...
Click to collapse
THANKYOU!!! That's what I needed to do as I was using the revolution.exe from the zip I got from the larger zip from the root instructions. Once I used the v4 from the revolution site it worked like a charm! yea!

Another fix would be to try it on another computer. I was having the same issue on my Ubuntu laptop so I tried it on my Ubuntu desktop and it fire right on up. Hope this does help some that are still having problems. It work so don't give up and its really worth it .

Listen and follow closely i made a thread already how to fix this
When you generate your beta key it is imperative that u generate it from the same revolutionary zip you downloaded, the reason people get invalid key is 99.9% because it wasnt generated from the same revolutionary file downloaded,
2nd important its alot easier to copy the beta key in the box and paste to command prompt.
Do this by highlight, key in box , copy it, then open revolutionary.exe.
When the cmd prompt opens take your cursor to the top corner of cmd box and right click go to edit then paste, this is because the beta key is easily fudged up and case sensitive.
Remember to have the fast boot unchecked, usb debug on, and charge only on. And have the modified drivers installed
if fails re download the revolutionary for windows or mac or whatever comp your on and regenerate the key from that specific download and open the exe. From that one, and erase all others. You will get zerging root
then when done choose recovery in hboot then youll get a blue cwm screen choose install zip fine the su-2.3.6.3-ef gh signed.zip that should be on the root of your sd card, and install, that pushes the actual superuser to your device
now your rooted fully with cwm

I am trying to root a friends EVO, and it is not working for me either. I have tried everything listed here and still get invalid key.
Fastboot unchecked, Debugging on, New HTC driver as listed installed, Antivirus turned off, Phone on Charge only.
hopeless
EDIT: EVerything is fine, I finally read and comprehended that I was supposed to use the SERIAL# showing on the Revolutionary screen to enter in to generate the key. Once I was smart enough to figure that out, DONE!! Phone rooted and flashing AMONRA as I type. HOOAH!!

You have to put your s/n not anyone's else, make sure your not confusing o with 0. Capitals matter, I just rooted and it works.
Sent from my PC36100 using XDA App

Fix for those who cant get the generated beta key to work for revolutionary root!!!!

If you can not get the generated beta key to work for the 2.3.3 revolutionary root, and it keep saying invalid beta key???
The fix is you must generate the key from the same revolutionary zip file you downloaded can not be used from different one and copy and past it from the beta key box, just hilight and copy then open the revolutionary.exe and put your mouse pointer at the top of the cmd box not in it, then right click scroll to edit then paste.
Remember 99.9% of invalid beta key response is because it has to be regenerated from a fresh revolutionary download and from the same one so , if all fails delete all your revolutionary downloads and start of and do the copy and paste.

I don't see how its a 'fix,' since that's how its supposed to be done from the beginning. I think most people are getting errors because the missed a value, or didn't get the letter case correct, because it IS case sensitive.

I have only downloaded the revolutionary tool once. I generate a beta key from the website for each phone s/n. I have rooted 6 GB EVO's w/o downloading a new .zip
v3 and v4 use different beta keys so you need to make sure your revolutionary tool is v4
Sent from my EVO 4G

Please help!!!!!
1. Should the serial number in the terminal box match the serial number on the phone?
2. I have tried all methods of the beat key and its still saying invalid key. SOo my question is, is there another way to get a beta key?
3. Is there any other way besides revolutionary to root the evo 4g?
If you guys can please answer these questions i would highly appreciate it.

Should the serial number in the terminal box match the serial number on the phone?
Yes
2. I have tried all methods of the beat key and its still saying invalid key. SOo my question is, is there another way to get a beta key?
Are you going to the website to generate the beta key? Someone above noted to copy the serial number from the command prompt. That saves yourself from typos.
3. Is there any other way besides revolutionary to root the evo 4g?
No
If you guys can please answer these questions i would highly appreciate it.
Sent from my PC36100

I can say that I tried my key a total of six times and got the invalid key response every time until I copied and pasted on the seventh.
I knew beforehand that it was case sensitive because this was the second Evo I rooted. My brother (his phone) and I both checked the characters every time and they matched every time. The first four times I tried from one download, the last two I downloaded separate files.
My theory is that for some unknown reason (im not smart at this stuff) when you first get an invalid key, it might continue to be invalid until you do the copy / paste.
Not sure if thats possible, but thats my guess.

He is right this is not a fix but actually how it is supposed to be done. Also I have used the same zip on multiple phones so that is a false statement. Now if all drivers are loaded up properly you will see your serial number in the cmd window. If that number is different than the one on the back of the phone you may have bigger problems but I would go with the one seen in the cmd box
Enter you info properly and the beta key that is produced can be copied and then as stated in the revolutionary thread- right click on the task bar of the cmd and click paste to enter your beta information. Much safer than writing it down and hoping you entered it correctly
One other things- If you have an older Evo with an older HBoot then you can try Unrevoked root method if not then yes you have to keep trying Revolutionary
If anyone needs help with this task PM me.

I never had any problems with the beta key it worked the first time .
Sent from my PC36100 using Tapatalk

pfcland said:
I never had any problems with the beta key it worked the first time .
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Most don't but a few do seem to have issues

hey, new to this but this seemed to work for me.. i verified (several times) on my phone, and everything on there said that my hboot version was 2.15.. (I even verified by powering down, holding the power/volume down button), and revolutionary still did not work.. but i noticed on the revolutionary exe. it said my phone had the 2.16, so i tried a different beta key with the 2.16 hboot option and now it seems to be working.. not sure if this helps.... worked for me..

help new phone i done this b4 no problem now it wont work
put in new sn got new key and wont go in ugh

I am having a slightly different problem, and I think its probably user error. I downloaded revolutionary-0.4prep4.zip and unzipped it into a new folder on my desktop. I tried running the 'revoluationary' application (double clicked it), i get a cmd box that flashes and disappears and that's it. What am i doing wrong or missing? Running windows7 64, dl'd the windows version. my phone is on and connected via usb.
Thanx

Try right clicking and running as administrator.. Did you also install the drivers, and is HTC sync installed

I did try running as admin. And I thought I had installed the drivers. I do have HTC Sync installed, too. I'll double check the drivers, though.
---------- Post added at 12:59 PM ---------- Previous post was at 12:53 PM ----------
tammerlane said:
I did try running as admin. And I thought I had installed the drivers. I do have HTC Sync installed, too. I'll double check the drivers, though.
Click to expand...
Click to collapse
Ok, I reinstalled HTC Sync and drivers just to be sure, ran revolutionary as admin, and it still flashes onscreen and disappears. I've even tried a different USB port, for whatever that was worth. My phone itself it is set to charge only, does that make a difference?

DO NOT HAVE SYNC IMSTALLED! You need to remove it and any other HTC thing installed when you installed sync.
SYNC causes issues with revolutionary.
You should download the drivers from the wiki which can be gotten to by the revolutionary site. They are all you need.
Sent from my PC36100 using XDA App

ack, that was it. thank you for pointing me in the right direction. problem solved!

tammerlane said:
ack, that was it. thank you for pointing me in the right direction. problem solved!
Click to expand...
Click to collapse
You guys have got to stop improvising and follow directions to the letter....It works believe me I have done quite a few phones already. Use the right drivers and it will work out for you... Good luck...

Ok people getting an invaled beta key. I mad the mistake of downloading the file and using the s/n from the back of the phone under the battery. That is not the sn you need. After you download the file and run it under admin it will ask you for the beta key. The serial number you need is the number right before the space provided for the beta key. In other words the serial number you need is in the comand prompt not on the phone.

Mine won't even get past the waiting for device, I'm using the same method that I used on my wifes EVO and mine before I took it in for a screen replacement. Only difference is I'm no longer using my laptop. I'm using a desktop now and it ain't working.
Sent from my PC36100 using XDA App

Thanks a lot, you helped me fix my problem

GET YOUR MSL now!

So simple. My sm j700p is rooted with QA2 completely stock rom. Original stock rom only root and TWEP RECOVERY.......
DOWNLOAD TERMINAL FROM PLAY STORE
Open and type this exactly. Of course you hit enter after each coomand....
su
am start com.sec.hiddenmenu/.Program_Edit
Then program service window will pop up.
Scroll to the bottom a Service Programming Code is your MSL CODE! WRITE THAT 6 DIGIT CODE DOWN AND GOTO DIALPAD AND TYPE ##DATA# AND CLICK EDIT AND ENTER THE SERVIVE PROGRAMMING CODE AND HIT OK!!!! Your in!
*********** THAT EASY! MAKE SURE TO HIT THE LIKE BUTTON! THANK YOU!

Exactly what to type in the terminal. Recommend Terminal Emulator.
And type exactly whats in the text to get your MSL CODE in just a minute or two.....

Bump bump bump

Wow no poll but has been visited so many times....

https://forum.xda-developers.com/sprint-galaxy-s6/general/to-msl-t3553758
You didn't even give me credit dude

@Poebat Never seen your thread before. Im only in my device j700 thread.

Bump

on sm-a520f there is no com.sec.hiddenmenu error 3
could you help me?
btw: i'm rooted and follow all steps as descriebed.pls help
https://ibb.co/gFHhek

XxTeXx07xX said:
@Poebat Never seen your thread before. Im only in my device j700 thread.
Click to expand...
Click to collapse
You posted this in my thread

pashamangl said:
on sm-a520f there is no com.sec.hiddenmenu error 3
could you help me?
btw: i'm rooted and follow all steps as descriebed.pls help
https://ibb.co/gFHhek
Click to expand...
Click to collapse
Im sorry I do not have that device so I cant help much. If you are rooted already i am positive that this will work. Atleast on 3 different samsung devices it has work for me each time. Make sure you are typing in exactly what it says.....
open the terminal emulator and type this in exactly! Dont typr in the word enter. Thats just a reminder to hit enter after each command.
su (enter)
am start com.sec.hiddenmenu/.Program_Edit (enter)
and you should get a pop up screen and scroll down to the bottom and the Service Programming Code will be at the bottom. Write down the 6 digit SPC code and thats your MSL when you goto your phone keypad and dial ##3282##. Hit edit and type in that 6 digit code and your in!!!! Not sure on all devices but even with my new device Samsung Galaxy J727P with 7.0 still works perfectly! am start com.sec.hiddenmenu/.Program_Edit
((({ NO SPACES WHEN TYPING IN THIS PART com.sec.hiddenmenu/.Program_Edit })))
I CLEARLY SEE WHY!!!!!!! you did not type /.Program_Edit
YOU FORGOT THE / In your picture I can clearly see you are not typing it in the correct way. You need to type it in EXACTLY THE SAME AS I TYPE IT IN THE THREAD> YOU ARE NOT TYPING IT IN CORRECTLY THATS WHY!!!!! THATS WHY ITS NOT WORKING AND YOU ARE GETTING A ERROR EVERYTIME. PAY VERY CLOSE ATTENTION WHEN TYPING IT IN. YOU NEED TO TYPE IT IN THE EXACT WAY I WROTE IT! Its nothing I did or that this dont work! I can see clearly in your photo you are not typing it in correctly and thats your problem. Clear as day you are not typing it in right. This is a error on your part. All you have to do is copy the commands in EXACTLY as I wrote it. (enters) are just reminders to hit the enter button....,... It wsorks great trust me! Its your fault, you are not typing it in correctly. I know it works and can see clearly that you are not typing it in correctly. I can see why in your screenshot!

Wow that last part turned quickly.

Nooooo Wayyyyy.....
XxTeXx07xX said:
So simple. My sm j700p is rooted with QA2 completely stock rom. Original stock rom only root and TWEP RECOVERY.......
DOWNLOAD TERMINAL FROM PLAY STORE
Open and type this exactly. Of course you hit enter after each coomand....
su
am start com.sec.hiddenmenu/.Program_Edit
Then program service window will pop up.
Scroll to the bottom a Service Programming Code is your MSL CODE! WRITE THAT 6 DIGIT CODE DOWN AND GOTO DIALPAD AND TYPE ##DATA# AND CLICK EDIT AND ENTER THE SERVIVE PROGRAMMING CODE AND HIT OK!!!! Your in!
*********** THAT EASY! MAKE SURE TO HIT THE LIKE BUTTON! THANK YOU!
Click to expand...
Click to collapse
I been looking and looking studying everything trying to figure this out. Low and behold I came across this posting. Thank you!

This works thank you

XxTeXx07xX said:
So simple. My sm j700p is rooted with QA2 completely stock rom. Original stock rom only root and TWEP RECOVERY.......
DOWNLOAD TERMINAL FROM PLAY STORE
Open and type this exactly. Of course you hit enter after each coomand....
su
am start com.sec.hiddenmenu/.Program_Edit
Then program service window will pop up.
Scroll to the bottom a Service Programming Code is your MSL CODE! WRITE THAT 6 DIGIT CODE DOWN AND GOTO DIALPAD AND TYPE ##DATA# AND CLICK EDIT AND ENTER THE SERVIVE PROGRAMMING CODE AND HIT OK!!!! Your in!
*********** THAT EASY! MAKE SURE TO HIT THE LIKE BUTTON! THANK YOU!
Click to expand...
Click to collapse
Unfortunately, it didn't work on my device (SM-J510GN). Even though my device is properly rooted, it shows an error. (picture attached)
https://imgur.com/a/dTd6y

cooldudell said:
Unfortunately, it didn't work on my device (SM-J510GN). Even though my device is properly rooted, it shows an error. (picture attached)
https://imgur.com/a/dTd6y
Click to expand...
Click to collapse
I know you posted this a month ago, but looking at your picture... you put a space when launching the activity.

mohhaxs said:
I know you posted this a month ago, but looking at your picture... you put a space when launching the activity.
Click to expand...
Click to collapse
There are no spaces. I re-checked it multiple times.

I'm able to still get mine. I just can't change my apn files that led me to finding how to get my Msl. I need to know how to access the apn file. Not the apn.xml files and oldapn.xml file. If you read them files in text editor it has a comment in green (NOTEPAD++) Tell you it has to match file in directory common/something I can't recall. Any insight?
Trying to get my hotspot free again like it use to be!

mohhaxs said:
i know you posted this a month ago, but looking at your picture... You put a space when launching the activity.
Click to expand...
Click to collapse
absolutely no spaces!!! Trust me!

mohhaxs said:
I know you posted this a month ago, but looking at your picture... you put a space when launching the activity.
Click to expand...
Click to collapse
ABSOLUTELY NO SPACES!!! TRUST ME! It still works today!

So this worked but didn't work. The program menu popped up and it said my code was 000000 and I tried that but still didn't have too many options available in the ##DATA# Menu