When I try to start the phone, it vibrates briefly, but does not switch on. I tried to remove the battery and try afterwards, but didn't work. Vol Up / Down + Home + Power didn't work.
If I leave it untouched for 10 minutes, finally starts, but this thing is disturbing. The phone has root, I want to unroot and send it in warranty service.
Solutions?
VALYYYY said:
When I try to start the phone, it vibrates briefly, but does not switch on. I tried to remove the battery and try afterwards, but didn't work. Vol Up / Down + Home + Power didn't work.
If I leave it untouched for 10 minutes, finally starts, but this thing is disturbing. The phone has root, I want to unroot and send it in warranty service.
Solutions?
Click to expand...
Click to collapse
are you sure you still have battery?
otherwise, with the phone shut down, try to connect to PC USB and see what happens.
okty2k said:
are you sure you still have battery?
otherwise, with the phone shut down, try to connect to PC USB and see what happens.
Click to expand...
Click to collapse
)) Yes I have battery about 80%, I'm sure about that!
When I try to connect to PC USB, the phone vibrate briefly and this is all!
VALYYYY said:
)) Yes I have battery about 80%, I'm sure about that!
When I try to connect to PC USB, the phone vibrate briefly and this is all!
Click to expand...
Click to collapse
try starting with Volume Up/Down + Power or VolumeUp+Down+Power.
do you remember installing something before (that needed a reboot), or similar?
Finely, the phone switched on, I reset the counters with Triangle Away, I did unroot complete from the SuperSu, but now appears in Download Mode Knox Warranty Void: 0x1.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
1) Turn off and remove battery
2)Put the battery back in and immediately hold the back button
3) Plug in the USB cable while still holding the back button
4)Your screen will remain black, but its in recovery mode, and the flashing software should detect it
Source: Sony Update Service, I installed it and it told me to do just that to get into the recovery mode
Looks like were one step closer into getting the X10 rooted
I'm afraid this doesn't work
eyeweaver said:
I'm afraid this doesn't work
Click to expand...
Click to collapse
It does - it just doesn't display the things we are used to with HTC phones for instance.
This is SE's standard flashing method(and recovery mode). It's the same for their WinMo phones and for Symbian.
It puts the phone in a special flash mode ready to accept a new ROM/flash.
As OP mentioned the screen will remain black throughout the process.
shud try fastboot when its in flash mode..
Code:
fastboot devices
or
Code:
fastboot boot randomrecovery.img
worth a try aint it!?
philicibine said:
shud try fastboot when its in flash mode..
Code:
fastboot devices
or
Code:
fastboot boot randomrecovery.img
worth a try aint it!?
Click to expand...
Click to collapse
tried it nothing happens !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Worked for me
does it lose all the settings and installed progs during the upgrade ?
(like usual S/E software does ?)
boo6 said:
does it lose all the settings and installed progs during the upgrade ?
(like usual S/E software does ?)
Click to expand...
Click to collapse
Yes. You can backup sms from the Messaging application by pressing the menu-button while in thread mode. And use MyBackup to backup settings, apps and everything you need on the SD-card or online.
Would this still work if the phone isn't being recognized by the computer? (correct drivers etc are installed).
I have an xperia Ray, so I assume it's the same method... I get no response from plugging it into usb or charger, it won't turn on, although sometimes if I hold the power button it gives a brief vibration. I think it might be bricked :-/
Ok so I feel like a complet dumb A$$!
I'm not a noob at these things but somehow (whilst under the influence) I managed to flash a att odim rom over top of the t-mobile vibrant! So now when it powers on it shows the att world phone splash, goes to black then loops.
I've tried just about everything I (already knew) and looked up here to get the frappin thing back into download mode, and it just keeps giving me (when the usb is plugged into the pc or battery charger) a spinny logo, followed by a grey (not green) battery icon, then black screen, then repeat.
Am I screwed?
I tried replacing the battery, doing the 3 button recovery, 3 button download, etc..
I'm sorry if this has been posted before but I'm disparate, and thought the gods of this board could help!
Open Odin and then hold the volume buttons and plug your usb cord into the phone. That should get you into download mode. Go find the .pit and .tar files for JFD and and flash them through Odin you should be safely back in your phone at that point.
Sent from my SGH-T959 using XDA App
Although since you flash an ATT rom into a tmobile phone your bootloader could be messed up. Im not actually sure about that at all though. Just seems possible and logical.
Sent from my SGH-T959 using XDA App
Yea - you may have messed the boot loader.
I would suggest buying a Jig.
A thought:
If you loaded a different brand ROM the vibrant way of entering download mode will not work anymore - maybe look up how that phone enters download and try?
Another thought -
Ive had it where I wasn't in "download mode" but Odin saw the ROM COM port. I flashed anyway (desperate) and it worked. (Id try the Jig first)
Find out how to go in download mode for att captivate..
Try those button methods because that's to only thing that'll work for you.
No jig can save you
Hey guys sorry for the late reply! Not long after I posted it I found the youtube bideo of the "jig", best $3 I've spent at radio shack!
Here are some pics..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ok so the phone got locked wrong code ! I need to flash it ! What do I need and what should I do ? Sorry for such a newbie question but I am new to this and kinda nervous !
If you only entered a wrong code too many times, you don´t have to re-flash your phone. Nokia says on his website: If you your phone got locked, turn if off, wait 15 minutes and try it again. If this doesn´t help or if you really forgot your code, try a hardreset. This will delete all information a your phone(apps, music+videos etc), but it will also reset the code lock.
Source: http://thewp7phones.com/hard-reset-windows-phone-7/
In case you are having trouble with your Windows Phone 7 handset a hard reset may be the last resort. This trick really helped me to fix a huge problem on my HTC Trophy. I had no WiFi connection while using 3G!!! If to turn 3G down, the WiFi works fine! But it’s not the option. Hard reset really fixed this problem. At one forum i found that hard reset fixed a problem with Nokia Lumia battery! Don’t forget that after hard reset you’ll get a phone like it was from the box ones!
1. Turn the phone off.
2. Hold BOTH volume Up and Down buttons and quickly press Power on button and hold volume buttons until you see such picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Now follow the instructions, press Volume Down and wait until your Windows Phone 7 is restored.
Click to expand...
Click to collapse
I hope I could help you
Hi! I have the Optimus 7 too, but when I try to reset it, nothing works. I tried holding both volume buttons+power but nothing happens for 30+ seconds. At first the LG logo shows up but it goes away after 2/3 seconds and nothing happens.
Also tried holding both volume buttons+power button+camera button, all it did was a cold boot and no restore =/
Any suggestions?
Thanks
Missus's Note 3 suddenly displayed the attached screen, no way of getting out of it, can't get into recovery etc. Also, the flash always remains on.
Anyone else experience this problem? Is the phone a gunner?
Sent from my D6633 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try pulling the battery. With the battery out hold the power button for 30 seconds, replace the battery and restart
Also could be some loose cables for the display. Take the back off the phone and check the connectors
grwalker said:
Try pulling the battery. With the battery out hold the power button for 30 seconds, replace the battery and restart
Also could be some loose cables for the display. Take the back off the phone and check the connectors
Click to expand...
Click to collapse
Thanks. No connectors lose. tried the battery pull already.
Nah that doesn't look right, have you tried going to download mode and flashing a stock ROM via Odin? If you can't go into download mode or recovery then I think its better to visit Service Centre.
Remove battery it might work
Wipe data, cache and davlik cache. It worked me
dalisoft said:
Wipe data, cache and davlik cache. It worked me
Click to expand...
Click to collapse
He cant see a **** and cant go to Recovery Mode. Read First before u Post !
Try to Install a Stock Rom via Odin, or if u have CM Rom try to Flash a Update/Downgrade File
Thanks all. It seems the screen is now working, but doesn't respond to any touch commands. I'm going to try and reinstall stock firmware, but I think I might need to take it in and get the LCD replaced.
How did you fix it?
After unlocking bootloader I attempted to flash TWRP onto the T510, but now I have managed to soft brick it. Smart Switch did initially connect to the device, but no longer does so, even after reinstalling the device driver from within Smart Switch.
The tablet is now stuck on the screen "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software". The emergency recovery doesn't work as Smart Switch will not connect to the device, although when I plug the tablet into my PC I can hear the sound Windows makes when it detects a new device...
I can't power the tablet off either, not even holding the power button down for 5 seconds, 10 seconds, even 30 seconds does absolutely nothing. Have I properly bricked this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I had to let my device just drain the battery before being able to boot up into recovery, maybe just let it go flat and try again
GRiiMx said:
I had to let my device just drain the battery before being able to boot up into recovery, maybe just let it go flat and try again
Click to expand...
Click to collapse
I left it overnight to drain the battery. When I woke up the screen was off, yet as soon as I plugged it into my desktop to try again with Smart Switch, it goes straight to the "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software", like in the last pic in my previous post.
Smart Switch still does not recognize the device and it is in exactly the same state as it was before - I can't do anything with it.
SMOKEU123 said:
I left it overnight to drain the battery. When I woke up the screen was off, yet as soon as I plugged it into my desktop to try again with Smart Switch, it goes straight to the "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software", like in the last pic in my previous post.
Smart Switch still does not recognize the device and it is in exactly the same state as it was before - I can't do anything with it.
Click to expand...
Click to collapse
i wouldnt be using smart switch to try bringing back a bricked device
Have you tried booting it into safe mode and resetting it from there?