Hi, I recently updated my Charm to CM7 and I thought I should share with you guys.
1. First of all your device should be rooted with SuperOneClick or any other method (if you don't know how to do it search on google)
2. Download Flipout System Recovery from the market.
3. Download CM7 ROM here.
https://docs.google.com/uc?id=0B_9PVhD7VHclc29JcWRFeWVWZFU&export=download
4. Download Google Apps here
https://docs.google.com/uc?id=0B_9PVhD7VHclMHdnUHFNdDBPV3M&export=download
5. Put both the CM7 ROM and the Google Apps on the root of the sdcard.
6. Open FlipOut Recovery and select Install Recovery System. Grant it superuser permission. After that select Recovery Boot
7. Wipe data, cache and open Advanced and wipe Dalvik cache
8. Select "install zip from sdcard" - "choose zip from sdcard" - select the CM7 ROM and go to - yes - and wait until finish installation, then use the same procedure to install the Google Apps.
9. Repeat step ''7'' again
10. Reboot and enjoy CM7.
I didn't have any problem(s) doing it so I hope it goes smoothly for you
Note: If it ain't broken don't fix it
Here are some screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
somewhere in africa
It works but in the app we have the Fm and the rootexplorer app in chinese
nunezfuente said:
It works but in the app we have the Fm and the rootexplorer app in chinese
Click to expand...
Click to collapse
for the root explorer replace it with this (attachment) but for the FM you have to bear with it.
Please could you upload this folder(system/etc/motorola/bp_nvm_default) and write your network providers name.
am trying to create a universal baseband switcher app.
Sorry to bother you
hello friend, I want to install this 2.3.6 gb my MB502 charm, but in steps, the market can not find any "Flipout System Recovery"
I have understood that this recovery is only for "motorola flipout", there is a section in the forum where they mentioned "FlipOut Recovery (CWM based v2.5.1.2)" does not mention charm, motorola charm MB502 is "[PORT] [CWM v5.0.2.6] Boostrapped Recovery for Charm and Flipside "or am I wrong?
incase you haven't noticed, Flipout and Charm share certain qualities because they're both Motorola phones besides why do you think this forum is under Flipout and Charm General.
just install the app and follow the instructions above, you should have no problems.
and i'll be very gratefull if you could help me with my research(check above). Please!
here is the app. enjoy
do you have the default background ? i set a background ,and it dont set back to default
make the number of homescreen 1 and set the desktop configuration for ''4 corners'' under the homescreen in the pereference from the background.
you can use this for the wallpaper (attachment)
guys help me out(above)
Hello friend .. even I do not install it cm7 it wanted that I was helping myself with folder (system/etc/motorola/bp_nvm_default) of t-mobile my this cel liberated and I use it with the telephony tigo colombia ... I am grateful for his response to him
What works and what doesn't work?
edit: I went ahead and flashed and so far so good but i noticed that it's only 2g. Anyway to switch it to 3g or is this a bug?
I've worked some things just do not work properly,
1. In the text message box, when you have text messaging on it, when you hit menu button gives FC.
2. No LED notifications work on haptic buttons, so it is impossible to know if you have received a missed call or text message.
NOTE: As a note I recommend making a backup of "system / etc / motorola / bp_nvm_default" because if not for your country will lose the signal.
Seem like it picks up 3g but doesnt reflect on the status bar also the status bar doesnt update so everything just overlaps. only way to get rid of the overlapping is to hold power button and hit reboot and the status bar will refresh and did notice the messaging app closes when one hits menu.
ok .. thank you for his contributions .. and q pasaria if I replace the folder etc original for etc cm7? Or only the file of sign?
I created this forum because I had no serious problems on my device, am sorry that it had different effects on our device.
My only problem is the 3g, keyboard doesn't show on screen and am sure there is a problem with the orientation.
For the network problems make sure you backup the network folder before the update.
If you have any problem with the network let me know cause I have a baseband switcher app which am working on, you could try it if you want:thumbup:
Sent from my MB502 using Tapatalk 2
raymondadutwum said:
Hi, I recently updated my Charm to CM7 and I thought I should share with you guys.
1. First of all...
Click to expand...
Click to collapse
My friend raymondadutwum, almost perfect:
- The USB connection isn't working properly. I set the USB connection for Memory Card Access but I don't see it on the PC (W7 Ultimate). The battery is charging when I connect on the PC and I don't show to me any error connecting my MB502 on the PC;
- Do you know how to disable the Backtrack?
For now, everything else is working very well =D
Thanks a lot by your directions. Cheers from Brasil
Edu
Well I figured out that 3g works but you have to change your network preferences to gsm/wcdma (wcdma preferred) also I wouldn't mind trying that baseband switcher app. The only thing that really bugs me is that the notification bar doesn't refresh so as soon as I get a notification it'll just overlap on top of whatever was there and eventually just looks like a mess. anyone know of any settings I can enable/disable as a work around?
*Update
Please, forget about the USB connection. My mistake. Now I found the 2nd option on the notification bar to enable the use of the USB storage LOL
So, I just wanted to know how to:
1 - disable the backtrack
2 - modify the look of that bar at right (resize the icons)
Other questions:
3 - What about the Boo ROM - Boo-CM-7-20130930-RC4 v0.7.3? Who tested? Would be nice to know about the results.
4 - Who is actually working to port the CM7 for Charm MB502?
Long life to MB502 (at least while I don't have money for a new smartphone LOL)
Edu
Some bugs (an update)
- The backtrack: how to disable?;
- To insert numbers on the numeric fields (ex. clock) it's necessary to use the ALT button;
- The mail and camera buttons of the keyboard are not working;
- Display rotation is not working.
I'll bring more information while using the smartphone.
[]'s
Edu
It seems my wifi no longer works with WPA2 networks. It works fine with the stock ROM. WPA1 works fine from a hotspot, but its not very secure. Anyone experience the same thing?
Otherwise, its pretty good!
raymondadutwum said:
If you have any problem with the network let me know cause I have a baseband switcher app which am working on, you could try it if you want:thumbup:
Click to expand...
Click to collapse
Can you upload the baseband swither app for MB502.
After installing CM7, 3G cant work well
Hi ramondadutwum,
These are working baseband files for Skinny, a Telecom subsidary, in New Zealand. Hope they are of assistance for you baseband switcher
Richard
Related
Thanks roebeet, gojimi, rothnic and all the other Devs here.
ROM is based off the stock TnT Rom. YOU MUST DO A FULL WIPE. Even if you are coming from TnT Lite.
-----------------------------------------------------------------------
TnT G-Harmony (Alternate link)
-----------------------------------------------------------------------
UPDATED 1/22
*Fixed hard keys
*Fixed force close when syncing Contacts
*Added Miui Music app
*Stock TnT Launcher was removed.
*ADW Launcher
*Stock Google Launcher
*All included system apks were stripped down and then optimized(Making this ROM very fast)
*2.6.32.9 Kernel
*Framerate Tweak(Thanks Dexter_nlb)
*Tnt Enchacment Pack
*Gingerbread Elements
*Gingerbread keyboard with working voice search
*build.prop had already been edited for the market.
*MusicMod Music player
*Miui Music app
*Spare Parts(turn the window and transitions to fast)
*Changed the screen animations
*Miren Browser(Miui style browser)
*Dancing Android Boot Screen
For the market:
For the market, go to Settings>Appilcations>System Appilcations and Clear the Cache for the Market and Force Close it. Then go down to Google Services Framework and clear data and then Force close it. Then go to the market and you should get the force close. Reboot and you'll be up and running
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looking forward to trying this out. Any visual additions or does it have the same look as stock?
Thanks, Rob
I'm definitely interested in this one.
Sent from my GTablet-TnT-Lite using Tapatalk
G-Harmony
How many levels of compatibility does this have? Sorry, couldn't resist. Specs sound good, more choices are always great! Rock on!
links are up
super fast, however: i see that there's a cifs.ko in system/lib/modules that doesn't seem to like cifsmanager. am i missing something here or was cifs support nit included in this build?
Sent from my TnT G-Harmony using Tapatalk
Nice
First of all, thanks to all the devs that put time and knowlegde into these great roms. This is a speedy rom, but miren browser kept freezing my tablet and forced me to reboot. The final time it froze, the tablet is completely unresoponsive... just going to let it die and play around with this rom a little more. I definitely have a problem with miren though.
After waiting 5 minutes, give or take, my tablet did shutdown. Just restarted and since I installed this rom, my hard home button does not function. The other buttons work great, but the home button does not. All the soft keys work. Tried the titanium backup market fix to no avail. Never got market to give me an error. Love the rom... Keep up the great work
Content on sdcard - Garbage after reboot
Not sure if this is just me or something in the ROM. After a reboot, it took more than 5 minutes to finishing scanning user internal storage. The notification indicated "Checking Sdcard for Errors". After this finished, all of my data is just garbage. I have switched between CM7 and VTb5.1 without problems.
cadillax02 said:
After waiting 5 minutes, give or take, my tablet did shutdown. Just restarted and since I installed this rom, my hard home button does not function. The other buttons work great, but the home button does not. All the soft keys work. Tried the titanium backup market fix to no avail. Never got market to give me an error. Love the rom... Keep up the great work
Click to expand...
Click to collapse
Thanks. For the market, go to Settings>Appilcations>System Appilcations and Clear the Cache for the Market and Force Close it. Then go down to Google Services Framework and do the same. Then go to the market and you should get the force close. Reboot and you'll be up and running.
for the market to work correctly the last part about the google framework is incorrect. instead of clear cache you need to clear data instead. then force close, open market, receive error, and reboot.
should be good to go then...
eddyo78 said:
for the market to work correctly the last part about the google framework is incorrect. instead of clear cache you need to clear data instead. then force close, open market, receive error, and reboot.
should be good to go then...
Click to expand...
Click to collapse
You're right. Thank you
Is there an alternate download link?
pbrauer said:
Is there an alternate download link?
Click to expand...
Click to collapse
Yes there are two links on the first post
Had to run the market hack twice, but it finally worked... Thanks all! This rom is quite responsive... Coming from vegan 5.1, I am enjoying the web browisng better as far as finger scrolling and screen responsiveness... have not attempted to use miren browser again, but will update as soon as I do.... Excellent rom
I'm taking it for a spin and so far so good.
Got Market to work with your fix... Thanks!
I usually run TnTlite 4.1 but decided to give this a try.
nvflash, wipe everything and start from scratch as usual.
clockworkmod .8
installed this rom without any problem
titanium backup opens, gets superuser permission as usual, then I am greeted with the following message:
BusyBox works but the "su" command does not elevate to root: "whoami" reports "whoami: applet not found" instead of root/uid0. I think your "Superuser Whitelist" system app does not work. Please check with your ROM provider.
I tried reinstalling this rom but get the same message, any ideas?
edit: also the search and home buttons do not work anymore
I had this problem. It asked if I wanted to fix it. I did and then everything worked fine. See if that works for you. Anyone have a fix for the hard home button yet?
dgondrez said:
I had this problem. It asked if I wanted to fix it. I did and then everything worked fine. See if that works for you. Anyone have a fix for the hard home button yet?
Click to expand...
Click to collapse
working on it
Really liked this one, but for some reason the home and search buttons don't work. Settings and back buttons work occasionally. Any fix?
Here is the new rom posted by Geno in the 8800 thread today.
The changelog of this new rom:
02-02-2012
CM a lot of updates e.g: ICS rotation animations
Calander not need account
fix bug
I do not have enough time, but I will continue.
(i hope you can understand my bad english)
Features
working: sensor / GPS / backlight / Bluetooth / 3D display /audio /RIL signal / WIFI / wifi hotspot / Camera / USB tether / Video
u8800pro not working: FM / TV-OUT
Issue: play music with speaker the sound is lots of hums and noises
Credits: Dzo, stockwell, NForce25, Genokolar, CM
Installation
To install, first make sure you have a recovery image.
On first install you should really wipe your data partition, so backup all your apps using titanium backup.
Put the zip fille on the sdcard of the phone
switch off the phone
Boot into recovery by pressing power and volume up and keeping them pressed until the recovery menu appears
Select "install zip from sdcard" by pressing volume up/down and then pressing power.
Select "choose zip from dcard"
Select the file you downloaded
Confirm
Wait until it finishes
Press back until you get to the main menu, select "reboot system now"
CHANGELOG
02-02-2012
CM a lot of updates e.g: ICS rotation animations
Calander not need account
fix bug
07-01-2012
fix Video Recording
use CM libaudio
23-11-2011
change autorun.iso 's path (cust partition)
fix&update enhanced scripts
Raise in-call volume
CM7 add T9 dialer
other mod
25-11-2011
update to use 35 kernel
fix sim not ready,data connect can't work
fix compass issue
fix in-call volume
DOWNLOAD
https://sourceforge.net/projects/genoandroid/files
SOURCES
https://github.com/Victor-android
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do I have to wipe/factory reset if I'm going update to this rom from previous CM7.1 Geno?
Without wipe it did not work for me so you should do it.
oxyg3n89 said:
Without wipe it did not work for me so you should do it.
Click to expand...
Click to collapse
You were right, wipe is a necessity
---------- Post added at 08:40 PM ---------- Previous post was at 08:36 PM ----------
I have crash on launch (com.android.phone), unable to use phone, I'm only one with this problem?
Yes, that is why i came back to CM7-07-01-2012.
i cant test it after full wipe fc.it must be a trick.if somebody had a success it will be good to show to others the way
yes, com.android.phone all time stops when try to call... whait for fix
bobsido said:
yes, com.android.phone all time stops when try to call... whait for fix
Click to expand...
Click to collapse
You are lucky that you can run your phone, I can't pass pin confirmation process because of (com.android.phone) crash It's obvious that we need fix.
P. S. I have talked with one of the developers, they don't have their 8800 Pro's anymore so they can't check their new builds for bugs. Geno don't have much time for this, hope that it will be fixed in near future It's sad that the best developers don't have anymore that phones for witch been working, logical that they are not interested in this device like before.
hi all,
these are 5 easy steps how i got it working on my phone:
before you start backup all your data (phonebook etc) because this is a clean install and everything will be wiped!
1) go to recovery menu. do a factory reset/data wipe. goto mounts & storage and format system. wipe dalvik cache (i don't know if this is necesary).
2) install the update-cm-7.2.0-RC0-u8800pro-Geno-120202.zip from sd card. restart phone.
3) install root explorer or similar. replace phone.apk with older version (i replaced with phone.apk from 20120107-cm-7.1.0-u8800pro-Geno-en.zip). you will get an FC. reboot your phone.
4) change permissions in root explorer for the phone.apk like this: owner->read/write, group->read, other->read.
5) reboot phone and enjoy
btw thanks geno!
i think you can replace the phone.apk with older version in the update-cm-7.2.0-RC0-u8800pro-Geno-120202.zip before flashing. it is much easier.
the fixed Phone.apk（you need this one better than old version）
http://sourceforge.net/projects/gen...C0-u8800pro-Geno-120202-en-fixed.zip/download
my first custom ROM. it looks great!
only a very little bug that I noticed: here in Italy we don't have any 4G network (only HSDPA 3,5G), but the icon in notification area tells "4G".
Really not a real bug, anyway
akalos said:
the fixed Phone.apk（you need this one better than old version）
http://sourceforge.net/projects/gen...C0-u8800pro-Geno-120202-en-fixed.zip/download
Click to expand...
Click to collapse
is the phone.apk in the fixed version any different than the older version?
New version with fix works ok with no bugs till now Little notice that I didn't find market application on this rom so I had to install it manually.
OK
Yeah i came from last november cyano rom and it's all perfectly functional! Only one thing, yesterday accelerometer didn't work, and photocamera too, but a simple restart and now all good!
Good work!
P.S. I have installed two times this rom because first one any opening keyboard throw an exception.
Althoguh it is written that fm doesn't work, could you try to install spirit fm app and see what happen?
Thx!
If someone wants to help the Community to understand the sdcard mount bug, please have a look here: http://forum.xda-developers.com/showthread.php?t=1483519
This is a poll, please vote!
Best regards,
kalo86
Hello, I have a serious problem, when my phone's screen turns off my phone also turn off itself... :S
ivcosla said:
Hello, I have a serious problem, when my phone's screen turns off my phone also turn off itself... :S
Click to expand...
Click to collapse
this began happen immediately after reflash, or after a certain time? try factory reset.
bobsido said:
this began happen immediately after reflash, or after a certain time? try factory reset.
Click to expand...
Click to collapse
This began always, using Cyanogen, and using Miui... and now I can't back to de original rom, but the factory reset don't fix the problem :S
ivcosla said:
This began always, using Cyanogen, and using Miui... and now I can't back to de original rom, but the factory reset don't fix the problem :S
Click to expand...
Click to collapse
Try without sd card, if not help try to roll-back to 512 official ROM from the pink screen and dload directory , must to work.
Sent from my u8800pro using xda premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
JellyTime for Iconia A501
R1 May, 20
Working: GPS and 3g
Not working: Mic
Buggy: Google Now crashes on launch due to hotwords being enabled by default. To fix: Plug in usb keyboard and type while launching gnow this will prevent it from crashing on launch, you can then tap the menu dots and enter settings-voice and untick hotwords
New features:
Kernel updated with boostpulse support in the interactive governor
bootanimation
Power HAL
cherry-picked upstream commits for tegra kernel
ROM:
http://jellytime-iconia.googlecode.com/files/JT_A501_R1.zip
Latest Gapps modified for a500 with working keyboard:
http://jellytime-iconia.googlecode.com/files/gapps_iconia_may20.zip
Kernel Source
https://github.com/randomblame/a500_2.6/commits/master
Feedback required by law
Dr. Doofenshmirtz, I'll try.
Hello
I can try, but I can tell you how it goes just over the weekend.
Android says that it is A500, but there are options for mobile connections, pretty weird.
Another thing, data connections - there are no apn's, so I decided to enter it manually, but after saving settings list is still empty. After reboot - same thing.
Then .......... I recovered another A501 (thanks to a friend of mine) and I have installed your rom.
The 3g works perfectly.
The GPS no, that's why I wrote in private (PM)
I would say GREAT JOB
thevilish said:
Android says that it is A500, but there are options for mobile connections, pretty weird.
Another thing, data connections - there are no apn's, so I decided to enter it manually, but after saving settings list is still empty. After reboot - same thing.
Click to expand...
Click to collapse
Did you install gapps?
Yes, I did. Twice. Once with mine old 20130301 gapps I downloaded month ago, and then this one (apparently the same).
And.. I can remove and insert sim card without any notification on screen.
Hi,
For me 3G is not working it cant even find any network. And for me also home button does nothing and cant open web browser ;p
EDIT:
After few reboots home and browser started to work bus still no network or 3g.
In Attached log I've went into airplane mode that turned it off and started GPS status.
for all, I installed it on stock Rom with bootloader V8
Hello
tresed said:
for all, I installed it on stock Rom with bootloader V8
Hello
Click to expand...
Click to collapse
OK, so basically you did a dirty flash on top of a stock ROM. Try doing all wipes them flash the ROM. Currently, the settings don't show a radio baseband, and errors when detecting network.
My internet is down, so will post dmesg when its back up.
For you others, please attach a dmesg
Adb dmesg > 3gdemesg.txt
Try to do it after boot.
Moscow Sorry, I badly explained
Yes I installed the stock rom, but obviously doing all wipe .... then everything clean
Tell me more about how this gets ADB dmesg> 3gdemesg.txt
?
tresed said:
Moscow Sorry, I badly explained
Yes I installed the stock rom, but obviously doing all wipe .... then everything clean
Tell me more about how this gets ADB dmesg> 3gdemesg.txt
?
Click to expand...
Click to collapse
Ok, with the new JB, you will need some new Google adb files for your PC, otherwise you cannot run the adb commands due to Google's new security. You can get a small package here for Windows PC. Just put them in a folder on your PC. (also, seems like the old command may not work with the new adb)
http://forum.xda-developers.com/showthread.php?t=2144709
Or,
You can do this through the Terminal App on the tablet.
1. Start Terminal Emulator
2. Type su (you should get some type of $ sign then)
3. Then type dmesg >/mnt/sdcard/dmesg.txt (or what ever you want to name it)
This creates it on your internal SD, then use a file explorer to copy it out.
Usually, I can't see the txt file when I move it to Ext SD, so I pull my card and get it from PC.
MD
Kernel Dmesg attached.
EDIT: Also, that USB Issue I told you about, seems to not be in this build. Considering 3g shares USB, I didn't get a reboot with flash sticks, so a step in the right direction.
When going to Settings/More/Mobile Networks, when selecting Access Point Names, Settings closes out back to the default Settings Page.
Logcat attached.
Looks like according to the logcat, it shells out because it can't find the radio. Also saw some info immediately above like LTE CDMA stuff. This makes sense as in the Settings About Phone, it doesn't have the radio baseband listed.
On a lesser priority, copying a file from my 1tb NTFS to the internal memory works great.
However, you cannot write back to the drive. VOLD?
Thanks Moscow ....
This is my .....
tresed said:
Thanks Moscow ....
This is my .....
Click to expand...
Click to collapse
Thanks,
Also, paste your build.prop here if you can. You can find it in /system. We're quite puzzled why your 3g is working and nobody else's is.
When you go to settings/more/mobile networks/access point names does it have your provider listed?
MD
here it is
Moscow Desire said:
Thanks,
When you go to settings/more/mobile networks/access point names does it have your provider listed?
MD
Click to expand...
Click to collapse
Yes there are the APN of my country .... Italy
tresed said:
here it is
Click to expand...
Click to collapse
Thanks, so that explains the 3g.
You have the TegraOwners build.prop. which probably means there were left-over files from the rom you were running before. I kind of suspected this.
So basically, what you have now, is a mix of the 2 roms.
Remember, before flashing any new rom
1. In CWM Wipe menu
a. Data/factory reset
b. Wipe cache
c. Wipe Dalvak Cache
2. In Mounts and Storage
a. Format System
b. Format Flexrom
Then install rom. I'll bet if you do that, you won't have 3g afterwards.
Thanks for the help though, as it clears things up, and randomblame can focus on the issues.
MD
I'm sorry to contradict you but I can guarantee that I have done all the steps you have listed perhaps exception of flexrom (can not remember, more no than yes).
With Rom TegraOwners for me 3g never worked, that's why I did not use for a long time (see signature in the latest version that I used some time ago) ...
But I knew the secret.
After trying the 3g working, I tried the GPS did not work and then I installed the fix found on TegraOwners (http://forum.tegraowners.com/viewtopic.php?f=9&t=1046&start=2220 # p33410) here who has rewrote the build.prop
Q&A Bat ROM Thread
jgfernog said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bat ROM V1
Special Thanks
>> Crash 1976 (for part of his ROM, see it here)
>> Chainfire (SuperSU)
>> Wanam (Wanam Xposed)
>> Albe95 (Galaxy S5 Apps>>>For more, click here)
>> AL_IRAQI (Screenshots)
>> XDA
>> myself
Features:
For Galaxy S5 Notification Panel
For this feature, you'll have to follow this steps(Click here), but you will not be able to use Wanam Xposed on notification panel anymore, it won't work. The other features of Wanam Xposed will work properly.
Manually install some apps
>>> Mega
This folder has some apks that I had problems trying to make them system apps, so just install as a normal app and will be alright. I know that has a lot of ported s5 apps that isn't here, I just put inside this folder stable apps. If you want to try, visit this thread and follow the steps, but i'm not responsible for problems, I'm not sure that everything will work.
BASIC ROM FEATURES BY ACTIVATE WANAM XPOSED
Call Recording
4 Ways Reboot (Reboot, Recovery, Hotboot, Download)
Full Color/Transparency customization for Status bar and Notification drawer elements
Secure Samsung Keyboard
Option to keep "Add Call" button with Call recording menu
Disable Camera shutter sound (+Screen Capture)
Flashlight trough volume button UP
Skip Music with Volume buttons
Save Call Logs View
Enable Keyboard Symbols
Enable Hangouts Calls trough cellular
Enable Camera while calling
Unlimited and Customizable Multi-View support
Bypass Exchange Lock check
Notification Panel Customization
Long Home key behavior
Long Back key to kill App (+ white list)
Disable increasing ringtone
Messaging Tweaks (raise limits and conversion)
Disable Scrolling cache
Enable Full rotations
White Circle Battery
Removed Camera permission
Transparent Notifications panel
Customize Clock format and size
Customize Battery text helper size
Customize Quick Settings buttons number per row
White themed Quick Settings buttons
Collapse Quick Settings after toggle
2 line formatted date on the panel header
Dark themed Multi-Window
Disable Boot sound
Customize Two line date header format
White/Black Email App background (Supported on some devices)
Transparent Quick Settings buttons background
Default hidden SMS logs
Add Call button to Logs and Contacts list
Disable Accounts icons on Contacts list
Customize Wifi AP Clients number
Disable Launcher page rotation
Add Exit button to browser
SMS Automatic input mode
Disable Call number formatting
Enable unlimited Contacts joining
Enable Gallery Rotation trough button
Set default Browser view to Desktop
Other Features
>> Clean (removed ...test.apk, useless Samsung apps, and some bloatware)
>> Battery / 3g / System / Streaming tweaks
>> Galaxy S5 apps (I'll add other apps on next version. Here just have stable apps, and the others apps that is not working, I changed the icon)
>> Knox Removed
>> others I don't remember
Download
V1:
>>> Mega
How to Install:
1) Copy my Rom to Internal sdcard
2) Install the lastest CWM Recovery
3) Backup, backup, backup
4) Fullwipe !!! (WIPE DATA, CACHE, DALVIK CACHE, /SYSTEM)
5) Flash the rom
6) Reboot
Your warranty is void now, I'm not responsible for bad use of this ROM
Warning:
* Please don´t publish any mirror of my rom.
* If you want to use any part of my rom ask for permission and give the credits and link to my post.
* If you are going to post my rom in other forum outside of XDA please send me a PM.
* I'm not responsible for any damaged caused by noobs using this rom inappropriately.
* Before you post a question read at least 5 page back or use the search botton.
* If you don´t like my work you don´t need to say it, simple don´t flash my rom.
* Please don´t ask for ETA
* I will answer all questions, but I'm not home everytime so maybe you'll have to wait.
* Bugs in the rom will fix, so no need to spam the post with the same problem or question.
* And always, remember this is a hobby.
* Any advice or new mod for my rom is always welcome
* Please read XDA rules
Screenshots:
Q&A Thread:Here
Click to expand...
Click to collapse
Is camera working fine
Hello,
Sorry for silly question, but I am newbie and till now not rooted my s4 i9500. I liked ur rom and want to try.
Can you please tell me whether the camera app is working fine means video recording and photo capturing is ok. and other sensors and gestures working? because I heard of many roms in which these features are not working.
Thanks.
manish.200588 said:
Hello,
Sorry for silly question, but I am newbie and till now not rooted my s4 i9500. I liked ur rom and want to try.
Can you please tell me whether the camera app is working fine means video recording and photo capturing is ok. and other sensors and gestures working? because I heard of many roms in which these features are not working.
Thanks.
Click to expand...
Click to collapse
Everything works flawless hehe
robertostorm said:
Everything works flawless hehe
Click to expand...
Click to collapse
Thanks.. this will be my first custom rom...
manish.200588 said:
Thanks.. this will be my first custom rom...
Click to expand...
Click to collapse
Good flashing
robertostorm said:
Good flashing
Click to expand...
Click to collapse
Hello,
Done with root and flashed ur ROM. All went well.
I would like to ask what is S Finder and Quick Connect in notification? and also I observed a black screen for minute duration after unlocking when using particle effect. Font on lock screen is not changing. Music not playing properly when screen is locked. No headphone symbol and its apps in notification panel.
Rest is awesome til now. Will report if anything happens.
sam acc
after installing i m not able to sync samsung account for i made backup of logs and sms in there. it shows disabled while all the other account as google are enabled. what has caused that?
No sync samsung account
"after installing i m not able to sync samsung account for i made backup of logs and sms in there. it shows disabled while all the other account as google are enabled. what has caused that?"
SAME PROBLEM FOR ME!!! T_T i need your help... thanks
UPDATE AND MOE INFO HERE:
http://forum.xda-developers.com/galaxy-s-i9000/i9000-development/5-1-1-rom-best-t3257126
Please step-by-step. I've just got this device with some Cyanogen and want to try something else.
alex_rex said:
Please step-by-step. I've just got this device with some Cyanogen and want to try something else.
Click to expand...
Click to collapse
Wait for my update 2,6, and then i give you full instruction.
UPDATE 2,6 is Very fast (Now in beta test)
can't find how to disable all animations because it's getting things slow with me especially when i try to call someone , i get up to 3 seconds to show me the call screen !! any way to fix this " BUG" :/ Awesome Rom
Animation DISABLE
You can go to:
-About phone, and 10 click in "Bulid number"
-Now go to settings>Developer options
-Window/transition/animator animation scale (0)
Background process limit:
-About phone, and 10 click in "Bulid number"
-Now go to settings>Developer options
- Background process limit
- Change "At most, 3 processes"
MORE RAM FOR FASTER
GO To Settings>Advanced>Bigmem
And click: Bigmem (break 720p)
REBOOT PHONE
And you can wait for UPDATE 2,6
" when i try to call someone , i get up to 3 seconds to show me the call screen !!"
Ok, i can see this
dracov76 said:
Animation DISABLE
You can go to:
-About phone, and 10 click in "Bulid number"
-Now go to settings>Developer options
-Window/transition/animator animation scale (0)
Background process limit:
-About phone, and 10 click in "Bulid number"
-Now go to settings>Developer options
- Background process limit
- Change "At most, 3 processes"
MORE RAM FOR FASTER
GO To Settings>Advanced>Bigmem
And click: Bigmem (break 720p)
REBOOT PHONE
And you can wait for UPDATE 2,6
" when i try to call someone , i get up to 3 seconds to show me the call screen !!"
Ok, i can see this
Click to expand...
Click to collapse
Okay I'll Try this right Now and can you please tell me the 2.6 Release Date !! thanks in advance
---------- Post added at 09:30 PM ---------- Previous post was at 09:24 PM ----------
Can I Use BigMem Setting !! PS: I don't need Camera ! what if i use that setting !!
If you use camera, you can click only XLMem.
I'm sending this message use version 2.6, and its so smooth
Now i must fix dialer slow, and stop auto update google services/google play [I need help with this]
:good:
dracov76 said:
If you use camera, you can click only XLMem.
I'm sending this message use version 2.6, and its so smooth
Now i must fix dialer slow, and stop auto update google services/google play [I need help with this]
Click to expand...
Click to collapse
can't wait to see what the new update can fix especially Dialer ^^ it's really an awesome work that you did Sir ^^ Good Luck
:good:
Wifi Direct please
Can you please get wifi-direct to work? I am not able to find any rom with this feature... thanks!
even today link for 2.6.1 !
dracov76 said:
UPDATE AND MOE INFO HERE:
http://forum.xda-developers.com/galaxy-s-i9000/i9000-development/5-1-1-rom-best-t3257126
Click to expand...
Click to collapse
I cannot answer there.
Please help. I'm trying to flash your ROM but stuck. See image.
What had happened? How can I fix it?
Thanks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Easy.
Download this rom:
http://forum.xda-developers.com/gal...om-android-icecold-project-7-0-i9000-t3205888
Without gapps.
format only /data
And flash, reboot recovery, full wipe and instal LOLLIPOP in this custom cwm
Thanks for advice. I've just flashed the CWM instead of this TWRP and it works.
But it seems that WiFi doesn't work
Will check.
WiFi issue
Hi.
It seems that I have rarely coming issue that WiFi doesn't work on Lollipop. I tried several different versions including yours - the picture is the same: "Turning WiFi on" - and it lasts forever. I saw some feedbacks from people who has the same issue but no working solution. Very sad because other feedbacks are OK. Very strange. Maybe you have some ideas regarding that?
Hmm... Strange. I reflashed new rom and it seems to be working! I'l test.
But nevertheless I've found some workaround maybe it will help somehow for someone:
This behavior (endless Turning WiFi on message) is an issue in CM.
So either boot without SD card inserted or Unmount sdcard (Settings > Storage) and reboot system whenever wifi has troubles.
Upd: ahh, sh... No, it still doesn't work. Just connected to wifi once, on the first boot. And then - the same. Tried to unmount sd - but it didn't help. SD unmounted but when rebooted - it mounted again and wifi doesn't switch on
My vote for Marshmallow
Originally Posted by dracov76 View Post
Guys.. i can give you last version 3.0.0, and tomorrow i am work on 6.0.0 by soopi ..
With work move apps to sd card
Ok or i must continue this rom to perfection?
Marshmallow
All Lollipop roms are already neared to perfection for our daily use.
So move to next..
All the best
A-5.1.1 v3.0
When does the update do? Can not wait. Thank you
:good:
OK, I'm very tired of other 4.x SLLLLLOOOOOWWWWWW ROMs and installed this one. Yes, it really smooth on the first glance, thank you. The only big issue as I understand applied to some models (including mine ) - not working WiFi with SD card installed. Sad but true. The only workaround (can be added to FAQ for example):
If WiFi stucks on "WiFi is starting..." message then:
- Unmount and remove SD card
- Reboot
- Turn WiFi on, connect to network
- insert SD card back.
So it works.
alex_rex said:
OK, I'm very tired of other 4.x SLLLLLOOOOOWWWWWW ROMs and installed this one. Yes, it really smooth on the first glance, thank you. The only big issue as I understand applied to some models (including mine ) - not working WiFi with SD card installed. Sad but true. The only workaround (can be added to FAQ for example):
If WiFi stucks on "WiFi is starting..." message then:
- Unmount and remove SD card
- Reboot
- Turn WiFi on, connect to network
- insert SD card back.
So it works.
Click to expand...
Click to collapse
Thanks for opinion! I Add this
anybody tried android 6.0.1?