i didnt build this from his source. he had posted a link on twitter yesterday for a VZW moto x dev edition and a TMO build. u have to be unlocked. will have same issues at CM
ALL NEW BUILDS ARE NOW ON Aokp.co go there for future releases
VZW dev: http://goo.im/devs/BMc08GT/AOKP/xt1060/aokp_xt1060_jb-mr2_unofficial_2013-10-13.zip
TMO: http://goo.im/devs/BMc08GT/AOKP/xt1053/aokp_xt1053_jb-mr2_unofficial_2013-10-13.zip
Sent from my XT1060 using xda app-developers app
Running it now but please be very careful as you must wipe your data which leaves you no way of recovering, all your nandroids are removed, wiped and gone. So back up your entire internal sdcard. Also flash the ROM and gapps, make sure it boots and works and then wipe data partition. A gain please be careful. If your new to flashing do not flash this, chances are you will starting a thread asking how to recover your system
Sent from my XT1053 using Tapatalk 2
flashallthetime said:
Running it now but please be very careful as you must wipe your data which leaves you no way of recovering, all your nandroids are removed, wiped and gone. So back up your entire internal sdcard. Also flash the ROM and gapps, make sure it boots and works and then wipe data partition. A gain please be careful. If your new to flashing do not flash this, chances are you will starting a thread asking how to recover your system
Sent from my XT1053 using Tapatalk 2
Click to expand...
Click to collapse
I have been running his test builds since the beginning of this month and I have never had to clear my entire storage. Just a stock data wipe.
I couldn't get the sdcard to read, so it was a data wipe that cured my issue. Works fine, runs smooth.OK music stops when screen turns off
Sent from my XT1053 using Tapatalk 2
i got the same issue with google music...but i then tried pandora nd that worked fine for me
edit: i got music player to work fine..i had the ootion for volume keys to toggle music on lockscreen on...i turned it off and the music kept playing just fine
Sent from my XT1060 using xda app-developers app
Hopefully some dev starts porting this to sprint devices. It's frustrating they won't support the sprint version officially because it's identical to the Verizon version.
Sent from my XT1056 using XDA Premium 4 mobile app
AOKP has always been my favorite ROM... I'm hoping they can get the Motorola features to work though... I dig active notifications and the camera maneuver and voice control.
9kracing said:
AOKP has always been my favorite ROM... I'm hoping they can get the Motorola features to work though... I dig active notifications and the camera maneuver and voice control.
Click to expand...
Click to collapse
It has active notifications built in but not Motorola's version
Sent on my Moto X
BMC08gt has started posting Moto x build for Tmo and Vzw dev edition on Aopk.co. so get your unicorn and show him some love
Sent from my XT1060 using xda app-developers app
skiwong20 said:
BMC08gt has started posting Moto x build for Tmo and Vzw dev edition on Aopk.co. so get your unicorn and show him some love
Sent from my XT1060 using xda app-developers app
Click to expand...
Click to collapse
Now we just need an unlocked bootloader so I can install it on my non-Dev edition!
dhacker29 has started making inits for the rom to work with aosp roms on SS..but i havent seen any progress on a kexec kernel to help it run.
Sent from my XT1060 using xda app-developers app
Any Love for the Droid Maxx DE?!? Miss the capacitive buttons!
Sent from my XT1080 using xda app-developers app
I can look at it...I will see if I can get a vendor tree setup but no promised since I don't have the maxx.
Sent from my XT1060 using xda app-developers app
skiwong20 said:
I can look at it...I will see if I can get a vendor tree setup but no promised since I don't have the maxx.
Sent from my XT1060 using xda app-developers app
Click to expand...
Click to collapse
Wow!! Thank you soo much... I would be glad to help test it if needed...!
skiwong20 said:
BMC08gt has started posting Moto x build for Tmo and Vzw dev edition on Aopk.co. so get your unicorn and show him some love
Sent from my XT1060 using xda app-developers app
Click to expand...
Click to collapse
So when you visit his page...
http://aokp.co/devices/xt1060
...there are not any builds posted. Am I missing it somehow?
###EDIT###
Found it under unofficial builds
Related
Anyone wanna give AOKP a try? Building now...
Sent from my XT926 using xda premium
mikeyinid said:
Anyone wanna give AOKP a try? Building now...
Sent from my XT926 using xda premium
Click to expand...
Click to collapse
I'm up for testing.
Sent from my XT907 using xda premium
Leraeniesh said:
I'm up for testing.
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
I'll post the link when its done. Everything but video camera should work.
Sent from my XT926 using xda premium
mikeyinid said:
Anyone wanna give AOKP a try? Building now...
Sent from my XT926 using xda premium
Click to expand...
Click to collapse
What's the pros and cons compared to CM10?
Droid RAZR M cruisin on 4.1.2 based CM10
http://goo.im/devs/mikeyinid/xt907/aokp_xt907_unofficial_2013-04-23.zip
Use the newest jb gapps since this is 4.2.2
Sent from my XT926 using xda premium
mikeyinid said:
http://goo.im/devs/mikeyinid/xt907/aokp_xt907_unofficial_2013-04-23.zip
Use the newest jb gapps since this is 4.2.2
Sent from my XT926 using xda premium
Click to expand...
Click to collapse
Not booting for me... I thought there were still graphics issues with the RAZR M and 4.2. But you obviously would know better than I would
sujaanj said:
Not booting for me... I thought there were still graphics issues with the RAZR M and 4.2. But you obviously would know better than I would
Click to expand...
Click to collapse
Not booting huh? That's a little odd. If someone else can confirm that I'll pull the file.
Sent from my XT926 using xda premium
mikeyinid said:
Not booting huh? That's a little odd. If someone else can confirm that I'll pull the file.
Sent from my XT926 using xda premium
Click to expand...
Click to collapse
Granted, I did use Safestrap. But the M hasn't ever had working HW-accelerated 4.2 due to framebuffer issues with the QHD panel. Those issues will hopefully be resolved with Pinter, Hash, and dhacker's work on a custom kernel.
sujaanj said:
Granted, I did use Safestrap. But the M hasn't ever had working HW-accelerated 4.2 due to framebuffer issues with the QHD panel. Those issues will hopefully be resolved with Pinter, Hash, and dhacker's work on a custom kernel.
Click to expand...
Click to collapse
Yea. Can't use safstrap
Sent from my XT926 using xda premium
mikeyinid said:
Yea. Can't use safstrap
Sent from my XT926 using xda premium
Click to expand...
Click to collapse
Got it. Works well, but we're missing HW rendering like I said... not as smooth as CM10. But looks like everything works except still and video camera. Nice to have another option on this device, especially 4.2. Thanks for building for us!
sujaanj said:
Got it. Works well, but we're missing HW rendering like I said... not as smooth as CM10. But looks like everything works except still and video camera. Nice to have another option on this device, especially 4.2. Thanks for building for us!
Click to expand...
Click to collapse
WiFi working?
Droid RAZR M cruisin on 4.1.2 based CM10
Yes, WiFi works. Thanks to the dev! I have been waiting for this since I left my S2! Keep up the work...running good so far...anything in particular you want to me look for?
Would someone mind running down a list of what is broken in the build?
Sent from my XT926 using xda premium
mikeyinid said:
Would someone mind running down a list of what is broken in the build?
Sent from my XT926 using xda premium
Click to expand...
Click to collapse
Also disable hw overlay in developer options and see if that makes it smoother
Sent from my XT926 using xda premium
mikeyinid said:
Would someone mind running down a list of what is broken in the build?
Sent from my XT926 using xda premium
Click to expand...
Click to collapse
I will when I get home.
Currently running CM10 with unlocked bootloader on TWRP. Booted in to recovery, wiped dalvik and cache, flashed your AOKP build along with the 4.2.2 gapps, wiped dalvik and cache again and rebooted. Upon reboot my screen went white (somewhat pixelated) went to boot screen and hung there. Then when I tried to restore a backup of my CM10 it would bootloop as well. Had to reflash CM10 and 4.0.x gapps then restore in order to get back to my CM10 build.
Droid RAZR M cruisin on 4.1.2 based CM10
UN5EEN said:
Currently running CM10 with unlocked bootloader on TWRP. Booted in to recovery, wiped dalvik and cache, flashed your AOKP build along with the 4.2.2 gapps, wiped dalvik and cache again and rebooted. Upon reboot my screen went white (somewhat pixelated) went to boot screen and hung there. Then when I tried to restore a backup of my CM10 it would bootloop as well. Had to reflash CM10 and 4.0.x gapps then restore in order to get back to my CM10 build.
Droid RAZR M cruisin on 4.1.2 based CM10
Click to expand...
Click to collapse
You gotta wipe system and factory reset too.
timpohladthomas said:
You gotta wipe system and factory reset too.
Click to expand...
Click to collapse
Alright I'll give that a go
Droid RAZR M cruisin on 4.1.2 based CM10
I'll try tomorrow I'll send the results.
Sent from my XT907 using xda app-developers app
timpohladthomas said:
You gotta wipe system and factory reset too.
Click to expand...
Click to collapse
By doing a factory reset will that wipe my internal hard drive?
Droid RAZR M cruisin on 4.1.2 based CM10
I decided to give cm10.1.3 a try now that it is stable. I've flashed cm on many devices without trouble including this s4. But this time when the phone booted, I had LTE displayed as connected in the status bar but couldn't get any throughput. 3g works fine when I switch to CDMA only. So as a test I flashed 10.2 nightly (which I have run before without issues) and no LTE with it either. So I dug up an old 10.1 nandroid which was fully backed in good shape and holy crap!! No LTE!!! So I flashed back to touchwiz nandroid and LTE works fine. What's up. Very weird. Any ideas.
Sent from my SPH-L720 using xda app-developers app
Same here I'm having troubles with LTE on my s4 running the latest version of beanstalk ROM and I live in a LTE area and have always have been able to get LTE. Any ideas?
Sent from my SPH-L720 using xda app-developers app
No..I tried re-downloading the ROM from other sources. Still 4g connects but is super slow. Like 5 mins to open a web page. I have great 4g coverage at home usually. 3g Is working good though.
Sent from my SPH-L720 using xda app-developers app
Im not sure but try a apn back up on stock rom, then reflash cm.
Sent from my SPH-L720 using xda app-developers app
Thanks gottablunt..will try that and post back
Sent from my SPH-L720 using xda app-developers app
Apparently you can't backup APN on 4.x ROMs? Not without purchasing titanium backup at least
Sent from my SPH-L720 using xda app-developers app
So I figured it out. 4g wasn't working because I'm an idiot and was wiping everything including system. Didn't realize there were settings that need to be left for cm to connect. At least that's the only reason I can think of. Hope this helps someone else so its not a total waste of forum space.
Sent from my SPH-L720 using xda app-developers app
I wiped my system a few days ago when I was flashing the latest beanstalk build, that explains why late isn't working. What should I do to fix it?
Sent from my SPH-L720 using xda app-developers app
If you have a backup of stock or another touch wiz ROM, flash back to that. Then boot into recovery, and do a factory restore. That will wipe data,cache,and dalvic, but leave the system intact. Then just flash cm or other aosp rom and reboot. Should be good to go!
Sent from my SPH-L720 using xda app-developers app
Thanks so much man LTE is back for me finally
Sent from my SPH-L720 using xda app-developers app
Glad it worked out!
Sent from my SPH-L720 using xda app-developers app
prc292 said:
If you have a backup of stock or another touch wiz ROM, flash back to that. Then boot into recovery, and do a factory restore. That will wipe data,cache,and dalvic, but leave the system intact. Then just flash cm or other aosp rom and reboot. Should be good to go!
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Just wanted to report that I came in here with the exact same problem and this fixed it for me as well. I was running the Pac Rom nightly and was pulling my hair out trying to figure this out. I too had formatted system just by force of habit. Maybe this should be mentioned in install tutorials not to do that.
In case you missed it Hashcode released the alpha of Safestrap over here...
[RECOVERY LOCKED] Safestrap Recovery v3.6x
...I am just sharing the news. You need to check the original thread for details and instructions. Please read carefully as there are a few caveats at this time. Like...
CURRENTLY THERE IS A KNOWN ISSUE WHERE IF YOU HAVE ENCRYPTION ENABLED AND INSTALL SS IT BOOTLOOPS. IF YOU FIT THIS DESCRIPTION PLEASE STAY AWAY FROM SAFESTRAP FOR NOW.
Click to expand...
Click to collapse
KNOWN ISSUES (PLEASE READ CAREFULLY):
For locked users: there is a process that happens when you click "Reboot Recovery" from the APK or use the "Recovery" button during the splash screen. Safestrap checks the device for write_protect and if it's enabled will automatically reboot the device to recovery (write_protect disabled) mode. You will see this as a screen with ORANGE text reading: "PLEASE WAIT THE DEVICE IS REBOOTING TO RECOVERY". Followed by the bootloader screen again. You may also see the splashscreen for Safestrap. If you see the splashscreen hit "Recovery" again. It's supposed to automatically take you to into recovery, but it doesn't work correctly yet.
Click to expand...
Click to collapse
And there are other things you need to read as well. So head over there and check out the OP and enjoy.
10/15 UPDATE BELOW
Hashcode said:
NEW Safestrap in the OP Link: v3.63
ATTENTION: IF UPGRADING FROM v3.62 or EARLIER USE "REMOVE RECOVERY" IN THE APK BEFORE INSTALLING THE NEW VERSION. I CHANGED THE HIJACK IN v3.63 -- DIFFERENT FILES ARE BEING CHANGED NOW.
CHANGES:
[3.63] I re-wrote the hijack to work at a MUCH better point during the boot. This cleans up most of the "jankyness" we were previously seeing with BT/Wifi and adb serial # on the stock rom. ** Note when upgrading to v3.63: Make sure to use the "Remove Recovery" in the previous version BEFORE installing the new APK. **
[3.63] The 2nd-init hijack was updated to work w/ Android 4.3 (for when that's pushed)
[3.62] Better handling for the virtual partitions
[3.62] Some bugfixes for /mnt handling
[3.62] Customizable sizes for partitions (you can use the defaults if unsure). Use the "+" or "-" buttons on the rom-slot creation screen to add / remove 100mb per click.
Enjoy
Click to expand...
Click to collapse
Is the at&t encrypted?
Sent from my XT1058 using XDA Premium 4 mobile app
mj0528 said:
Is the at&t encrypted?
Sent from my XT1058 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You cannot use it with encryption.
So as long as we don't have it enabled in security, were fine?
At&t version?
Sent from my XT1058 using XDA Premium 4 mobile app
mj0528 said:
So as long as we don't have it enabled in security, were fine?
At&t version?
Sent from my XT1058 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I just saw the tweet and thought I would share it. You'll have to double check the original thread. But it looks like (to me and I could be completely wrong) that as long as you haven't enabled encryption then you should be good.
tried it.. it wont boot into bootstrap on the at&t version great to see progress thou
Sent from my XT1058 using XDA Premium 4 mobile app
kornklown69 said:
tried it.. it wont boot into bootstrap on the at&t version great to see progress thou
Sent from my XT1058 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah, me too. Bummer. I had a heck of a time getting it back to receiving a radio signal.
Sent from non rooted motoX :'(
Which build are you guys trying it on?
touchpro247 said:
Which build are you guys trying it on?
Click to expand...
Click to collapse
I tried it on the newest update..... That I did this am! Dammit! Does it work with the original build?
im on original build still notta
Sent from my XT1058 using XDA Premium 4 mobile app
That makes me feel a little bit better that you got screwed too j/k @kornklown69
Sent from non rooted motoX :'(
matt99017d said:
That makes me feel a little bit better that you got screwed too j/k @kornklown69
Sent from non rooted motoX :'(
Click to expand...
Click to collapse
lol naa itll work out hashcode is a master... im probably going to sell this phone for the next nexus
Sent from my XT1058 using XDA Premium 4 mobile app
hashcode twitter says he's fixing tonight
Sent from my XT1058 using XDA Premium 4 mobile app
kornklown69 said:
hashcode twitter says he's fixing tonight
Sent from my XT1058 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sweet!
Sent from non rooted motoX :'(
Its been updated...
touchpro247 said:
Its been updated...
Click to expand...
Click to collapse
Updated and fully functional so far
Sent from my SCH-I545 using xda app-developers app
This is great! Hopefully we will see development really take off for this device now! Thanks hashcode!
Sent from my White Moto X
Works great!!
Sent from my XT1058 using XDA Premium 4 mobile app
I took the latest ATT ota... am I screwed?
Sent from my SCH-I545 using xda app-developers app
Got my Galaxy Gear Watch today and couldn't get it working on my AOSP ROM so I moved over to a TW ROM. However, I hate the TW look. It's too big and clunky so I went looking for some TW ROMs and found this one:
http://www.elementalxdesigns.com/ec...-0-(08-27-13)-Touchwiz-stability-AOSP-Styling!!
I would love to see this ROM ported to the Sprint S4!
What do you guys think?
Of course it would just be a lot easier to just get Galaxy Gear working with AOSP, but TW generally is more stable with better battery life.
Sent from my SPH-L720 using xda app-developers app
If I'm not mistaken, can't you flash a Verizon rom with a Sprint kernel and it'll work?
Sent from my SGH-M919 using Tapatalk 2
imneveral0ne said:
If I'm not mistaken, can't you flash a Verizon rom with a Sprint kernel and it'll work?
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Yes you are correct
Sent from my SPH-L720 using Tapatalk
imneveral0ne said:
If I'm not mistaken, can't you flash a Verizon rom with a Sprint kernel and it'll work?
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
How did I not know this? I'll give it a shot and see what happens!
Sent from my SPH-L720 using xda app-developers app
R0CKSTAR3N3RGY said:
How did I not know this? I'll give it a shot and see what happens!
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
As long as it's TW ROM. I've never tried AOSP.
BTW the way to install is to wipe data and caches the install ROM. Then wipe data once again then absprint kernel.
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
As long as it's TW ROM. I've never tried AOSP.
BTW the way to install is to wipe data and caches the install ROM. Then wipe data once again then absprint kernel.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Clean installed, wiped data, then flashed the Sprint kernel, and got stuck in a boot loop. Tried a couple kernels too. Might try again some time today.
daniel4653 said:
Yes you are correct
Where would I find a Sprint Kernel for the Galaxy S4?
Click to expand...
Click to collapse
Bohnstedt39 said:
daniel4653 said:
Yes you are correct
Where would I find a Sprint Kernel for the Galaxy S4?
Click to expand...
Click to collapse
In original developement section.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
R0CKSTAR3N3RGY said:
Got my Galaxy Gear Watch today and couldn't get it working on my AOSP ROM so I moved over to a TW ROM. However, I hate the TW look. It's too big and clunky so I went looking for some TW ROMs and found this one:
http://www.elementalxdesigns.com/ec...-0-(08-27-13)-Touchwiz-stability-AOSP-Styling!!
I would love to see this ROM ported to the Sprint S4!
What do you guys think?
Of course it would just be a lot easier to just get Galaxy Gear working with AOSP, but TW generally is more stable with better battery life.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Did you ever get this working??? I've been trying to figure this out also:fingers-crossed:
I'll take a look at this. No promises but it sounds too good to pass up myself. If I make progress I'll post it here.
Not much to say at this point. Its bootable with a little updater.script editing and flashing the ktkernel with aroma and instantly rebooting recovery and flashing an older 4.3 ktkernel. No data as of yet. I guess if I can get a stable data through either network or WiFi I'll make a download for ya. Or just some good links and a tut.
GR8 job bro. Thanx alot
Sent from my SPH-L720 using XDA Free mobile app
There's also a KK version that would be awesome to have ported.
https://www.elementalxdesigns.com/e...25-14)-Real-AOSP-styling!!-KitKat-has-arrived!!!
Sent from my SM-P905 using XDA Free mobile app
Daisflaque said:
Not much to say at this point. Its bootable with a little updater.script editing and flashing the ktkernel with aroma and instantly rebooting recovery and flashing an older 4.3 ktkernel. No data as of yet. I guess if I can get a stable data through either network or WiFi I'll make a download for ya. Or just some good links and a tut.
Click to expand...
Click to collapse
Any luck with this?
Sent from my SPH-L720 using XDA Free mobile app
SB03 said:
Any luck with this?
Sent from my SPH-L720 using XDA Free mobile app
Click to expand...
Click to collapse
None.. sorry. Very busy atm and have no time..
Sorry for the silly question but I've been curious. Any particular reason that we haven't seen any AOSP/AOKP ROMs for our device yet? Is it lack of development or is there something a bit more technical that is preventing that from happening? I usually love to tinker and they offer quite a bit more options. Again, just curious....
Sent from my SM-N900V using xda app-developers app
I found my answer. Disregard.
Sent from my SM-N900V
What was your answer?
Sent from my SM-N900V using XDA Premium 4 mobile app
sean.yesmunt said:
What was your answer?
Sent from my SM-N900V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
.....Locked bootloader
Sent from my iPad using Tapatalk
cant run custom kernel on locked bootloader (retail version)
Yeah but didn't the Bionic also have a locked bootloader? We were still able to run AOKP through safe strap. Hopefully we can run AOKP the same way on the Note 3. Unless I'm wrong about the Bionic.
Sent from my SM-N900V using xda app-developers app
Krazie316 said:
Yeah but didn't the Bionic also have a locked bootloader? We were still able to run AOKP through safe strap. Hopefully we can run AOKP the same way on the Note 3. Unless I'm wrong about the Bionic.
Sent from my SM-N900V using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2550013
Sent from my SM-N900V using xda app-developers app
Krazie316 said:
Yeah but didn't the Bionic also have a locked bootloader? We were still able to run AOKP through safe strap. Hopefully we can run AOKP the same way on the Note 3. Unless I'm wrong about the Bionic.
Sent from my SM-N900V using xda app-developers app
Click to expand...
Click to collapse
This is a complete guess but I'd say it wasn't a full aosp rom. Probably just a rom made to look and work like aokp on the regular kernel
Sent from my SM-N900V using Tapatalk
My developer edition has unlocked bootloader and tmobile as has unlocked bootloader and there is one in the works for cm but that is it
oneandroidnut said:
there is one in the works for cm but that is it
Click to expand...
Click to collapse
For T-Mobile device, not our Verizon DE's, right?
cam30era said:
For T-Mobile device, not our Verizon DE's, right?
Click to expand...
Click to collapse
if you have a verizon de you can run tmobile roms/kernels just fine
oneandroidnut said:
if you have a verizon de you can run tmobile roms/kernels just fine
Click to expand...
Click to collapse
I just want to make sure I understand this. There is currently a thread on T-Mobile Developer forum for CM10.2. While it's not working well now, once it's debugged it should work fine on our DEs, with the stock TM CM10.2 kernel?
cam30era said:
I just want to make sure I understand this. There is currently a thread on T-Mobile Developer forum for CM10.2. While it's not working well now, once it's debugged it should work fine on our DEs, with the stock TM CM10.2 kernel?
Click to expand...
Click to collapse
correct. i believe you have to change just the apn or use global settings but it can be done no big deal at all. kernels run with no issues. im on tmobile kernel from imo with zero issues at all!
oneandroidnut said:
correct. i believe you have to change just the apn or use global settings but it can be done no big deal at all. kernels run with no issues. im on tmobile kernel from imo with zero issues at all!
Click to expand...
Click to collapse
Thanks a lot! I'll let you know if I see a working tmo CM rom there. Would you do the same, please?
cam30era said:
Thanks a lot! I'll let you know if I see a working tmo CM rom there. Would you do the same, please?
Click to expand...
Click to collapse
sure i checked earlier today and it is not working yet so who knows when