Hi all, i am just wondering has anyone had success in porting MIUI to Wildfire. Either semi booting it or fully booting it.
I have decided to give porting a shoot so far i am getting a boot loop so i can not logcat anything.
I know its mainly based on ARM V7 but its using a CM7 kernel so surely it could be ported i know it would require a lot of work i.e converting it from HDPI to LDPI/MDPI but i have some spare time hence why i am having a bash.
If anyone knows someone that can help or you have tried yourself please PM me.
I just dont understand why the devs dont port MIUI to smaller res screens or older processors, cuz it doesnt look anything special or got some very intensive eyecandy or w/e, i had it on hd2, removed 10 mins after flashing and back to hyperdroid ^^
but, for each his own, good luck with porting
From what i can gather the ARM V6 can be a issue as the MIUI rom is for ARM7 there is firmware for Wifi GPS etc but i am willing to help port this rom. With a bit of help from a Master.
Hi all,
For everyone asking about custom roms ont 2.3.4 here is the situation :
For everyone who have upgraded the MS2 to the Official 2.3.4, no step back is possible to Froyo 2.2 or 2.2.2.
custom ROMs based on Froyo will not work (like CM7/9 from Tezet.)
=> Someone will have to build on based on the 2.3.4 kernel.
custom ROMs based on Chinese GB seems to work...
=> MS2Ginger for exemple.
custom ROMS based on Defy+ ROMs ?
So, who want that the CM or MIUI ROMs are ported to the newer Motorola kernel ? (So everyone could choose between BLUR, CM and others ?)
I say it on an other thread that the ms2ginger and the argen2stone roms are running on an ms2 with stock gb rom. Somebody must make an cm7 with the 2.3 kernel than wie can use customroms.
thanks for your thread.
But my question is, this official rom 2.3.4 does work better than froyo? or the custom rom 2.3.7 de CM7? It might be a dumb question or it's answered in another thread, if that case sorry.
Thanks
Yes i want Miui with the new kernel ! For a better touchsreen sensitivity for eg.
I try Argen2Stone 2.7 RE but i dont see adjust scrips and keep the old dialer from stock rom.
The 2.3.4 brings some bug fixes, and some upgrades.
From the kernel point of view, the same release is used (Linux Kernel 2.6.32.9). So no major bug fixes at kernel level for my point of view. Maybe some parameters changed.
The main point is for the "upgraders" to Gingerbread that can't go back to Froyo.
boorce.com said:
Hi all,
For everyone asking about custom roms ont 2.3.4 here is the situation :
For everyone who have upgraded the MS2 to the Official 2.3.4, no step back is possible to Froyo 2.2 or 2.2.2.
custom ROMs based on Froyo will not work (like CM7/9 from Tezet.)
=> Someone will have to build on based on the 2.3.4 kernel.
custom ROMs based on Chinese GB seems to work...
=> MS2Ginger for exemple.
custom ROMS based on Defy+ ROMs ?
So, who want that the CM or MIUI ROMs are ported to the newer Motorola kernel ? (So everyone could choose between BLUR, CM and others ?)
Click to expand...
Click to collapse
I tryed to flash MS2Ginger but the MS2 doesn't turn on.
I don't know.
could Anyone post how to flash step by step ?
tks
I think that the new kernel can improve MS2 performace so a rom based on the new kernel it's much better than the old modded rom.
Simokill said:
I think that the new kernel can improve MS2 performace so a rom based on the new kernel it's much better than the old modded rom.
Click to expand...
Click to collapse
I have the same idea...waiting for some MIUI or CM7 based on this new kernel.
I'd like someone who knows what they are doing to de-blur it. I have removed as much as I dare but still have too much moto... rubbish on the phone.
yeah agreed with u guys i wish a custom rom based on new gb 2.3.4
diavolobianco said:
yeah agreed with u guys i wish a custom rom based on new gb 2.3.4
Click to expand...
Click to collapse
+1
or new FR
is true. I think it's time to leave the kernel of froyo that is old and start to compile with the new kernel brings improvements and is of GB!
GB kernel is in fact the same linux kernel version as froyo kernel, so there are not any improvements except for some minor patches.... So no reason to leave froyo.
I just don't get why you all guys updated to GB and then you all crying, you can't use custom roms and that froyo kernel is old and why gingerbread isn't used... GB kernel in custom roms isn't high priority in dev right now. Deal with it. GB kernel don't bring any valuable improvements, so only reason to leave froyo and get in GB are you all, who did that mistake and upgraded to official GB without even reading the forum here (because it was already written so many times there...).
No offense please, I'm just sayin' that GB kernel in custom roms don't have high priority, because of missing downgrade capability and because they don't bring nothing so exciting and big or valuable, nothing worth. So when dev update to GB, he can't go back to froyo - and this is quite big limitation...
Actually CM9 does work over Euro GB kernel. It is based on Chinese GB kernel. And I must say Tezet has made some really good progress with CM9.
And Defy ROMs based on Defy+ kernel have also been proved to work on Euro GB kernel.
These ROMs work if we remove devtree.img and boot.img from the update.zip and thus only flash system.
So I guess it is only a matter of time.
Anonymous_ said:
I just don't get why you all guys updated to GB and then you all crying, you can't use custom roms and that froyo kernel is old and why gingerbread isn't used... GB kernel in custom roms isn't high priority in dev right now. Deal with it. GB kernel don't bring any valuable improvements, so only reason to leave froyo and get in GB are you all, who did that mistake and upgraded to official GB without even reading the forum here (because it was already written so many times there...).
Click to expand...
Click to collapse
Good sir, your silver tongue rivals that of our finest bards! Please, travel amongst the populace, spreading joy and soothing woes.
Anonymous_ said:
I just don't get why you all guys updated to GB and then you all crying
Click to expand...
Click to collapse
No crying here, just discussion, which is what the forum is for. What was your point?
may be it's better to find a way to downgrade.
Kangburra said:
No crying here, just discussion, which is what the forum is for. What was your point?
Click to expand...
Click to collapse
I think I said my point clearly... But once again then:
I'm just sayin' that GB kernel in custom roms don't have high priority, because of missing downgrade capability and because they don't bring nothing so exciting and big or valuable, nothing worth. So when dev update to GB, he can't go back to froyo - and this is quite big limitation...
And don't take my words too personal. Easy man, easy...
Sometimes it's cool to have stock ROM. But,it will be much cooler if we can switch to custom ROM's. Stock ROMs are slower and less free RAM than CM7 or MIUI. Now,I'm getting bored with MS2Ginger2.1.
All we have to do is just wait..
hi, did anyone manage to overclock after updated to stock 2.3?
android overclock doesn't work anymore after i updated
I tried flashing both MIUI gingerbread based ROMS on my A953, and i've got problems with both the brightness and the keybord lights; I read it might be because of a different Kernel being needed
I dont have that Kernel and i cant post on the Development section.
If someone has it or knows where to get it I'll be much obliged
Thanks
Hi everybody.
Who tell me , how port ICS AOSP rom from this http://maclaw.pl/?page_id=180 . I think AOSP will be good speed and smooth on this device. I used some guide's to ''Fastest and simples port...'' , but any don't help me port THIS ROM (stop on boot image).
I used Miroslav build - CM9.
PS. Don't post comment: ''that device is too old for ICS , check AOSP 2.3.7 bla, bla'' . Everything is possible if u want!
PolishVodka said:
Hi everybody.
Who tell me , how port ICS AOSP rom from this http://maclaw.pl/?page_id=180 . I think AOSP will be good speed and smooth on this device. I used some guide's to ''Fastest and simples port...'' , but any don't help me port THIS ROM (stop on boot image).
I used Miroslav build - CM9.
PS. Don't post comment: ''that device is too old for ICS , check AOSP 2.3.7 bla, bla'' . Everything is possible if u want!
Click to expand...
Click to collapse
If we tell it to everybody that ICS & JB projects are too heavy for our device, is true. We have to understand that, I want a working ICS or JB, course I do! But we have to put our feet on the earth and see that LG Swift cannot run even 95% functional ICS or JB rom.
Sorry if I didn't help you, but the reality is that.
@up I don't need thats posts...wait for realy help.
HQ mpeg4 movie without QComm decoders it was incredible...it was.
Naaa this types of cheap and dirty ports will never do. Go check out xda-university.com great guides by devs on how to build aosp ROMs kernels etc.
I hope there is some developer will make a different custom Rom for Z00T/Z00L, such as MIUI, COLOR OS, etc , i always hope my device Z00T have a MIUI rom, but till now MIUI rom unavailable for our device .. i jealous With other smartphones that already have MIUI Rom ... I'm sorry, not that I'm demanding, but it's a phrase of my wishes and also possibly other users
Up
Miui Rom is available
https://forum.xda-developers.com/zenfone-2-laser/development/wip-miui-8-t3473409
still in WIP and now already can be called dead project