Some months back I installed Dynamics ROM v2.1.
Yesterday I wanted to flash the newest version 2.2 on my Omnia 7.
But I'm unable to enter the MAGLDR screen with volume down + power button + camera button.
It gives a faible vibration when it tries to enter the MAGLDR menu but the Samsung Omnia 7 logo just keeps standing there.
After a few seconds the logo disappears and reappears.
When I release the buttons the phone just loads the currently installed ROM.
Same with the Download mode; Although when holding volume up + camera button, then inserting the usbcable I'm able to enter download mode.
Anyone experienced this before?
Rubn86 said:
Some months back I installed Dynamics ROM v2.1.
Yesterday I wanted to flash the newest version 2.2 on my Omnia 7.
But I'm unable to enter the MAGLDR screen with volume down + power button + camera button.
It gives a faible vibration when it tries to enter the MAGLDR menu but the Samsung Omnia 7 logo just keeps standing there.
After a few seconds the logo disappears and reappears.
When I release the buttons the phone just loads the currently installed ROM.
Same with the Download mode; Although when holding volume up + camera button, then inserting the usbcable I'm able to enter download mode.
Anyone experienced this before?
Click to expand...
Click to collapse
Did you try to reinstall the magldr with download mode + dft tool?
anaheiim said:
Did you try to reinstall the magldr with download mode + dft tool?
Click to expand...
Click to collapse
Thanks Anaheiim,
I managed to install the MAGLDR v2 again with updating samsung usb drivers.
Altough it works, the only way I can get into the menu is:
- remove battery
- insert battery again
- hold volume down + camera button
- attach usbcable to phone
Then after pressing the back button I managed to get into the MAGLDR menu.
Without the USB cable I cannot get it to work, but at least it is working again.
Rubn86 said:
Thanks Anaheiim,
I managed to install the MAGLDR v2 again with updating samsung usb drivers.
Altough it works, the only way I can get into the menu is:
- remove battery
- insert battery again
- hold volume down + camera button
- attach usbcable to phone
Then after pressing the back button I managed to get into the MAGLDR menu.
Without the USB cable I cannot get it to work, but at least it is working again.
Click to expand...
Click to collapse
> You do not have a usb cable?
> You have made the updates with zune after dynamics 2.1 installed (does not matter the date, week, month, etc ...) after?
And read http://forum.xda-developers.com/showthread.php?t=2197846
anaheiim said:
> You do not have a usb cable?
> You have made the updates with zune after dynamics 2.1 installed (does not matter the date, week, month, etc ...) after?
And read http://forum.xda-developers.com/showthread.php?t=2197846
Click to expand...
Click to collapse
> I do have a usb cable but I'm just a bit suprised it's not working anymore without the USB cable for me
> Have not done any updates through Zune or any other ways
I will give your ROM a go aswell. I think I did try one of your beta versions some time ago.
Can't recall the reason for switching back to dynamics, though.
I have sorted out what the exact issue is, the camera hardware button needs to be pressed really hard.
It seems to not always register when I press it.
Related
Hey i have a problem, i cant do anything or install anything on my phone, because when i try install Task29 ou MAGLDR i have this error message:
ERROR [260]: CONNECTION
Please i need help Thank You very much
Re-enable usb connections in active sync, restart pc. Try again.
Sent from my HD2 NANDroid using XDA App
MattOG said:
Re-enable usb connections in active sync, restart pc. Try again.
Sent from my HD2 NANDroid using XDA App
Click to expand...
Click to collapse
Thanks
i restarted my pc many times but problem still remains
my HD2 sync perfectly with HTC Sync.
two days ago i flash perfectly Android in my HD2. but today i cant do anything:s
Put your phone into bootloader mode and connect to pc. Does serial change to usb once plugged in? If not try moving to another usb port on your pc , preferably one at the rear and allow the drivers to be fully installed. Once you get usb to show on screen you can then try again.
ClydeB1 said:
Put your phone into bootloader mode and connect to pc. Does serial change to usb once plugged in? If not try moving to another usb port on your pc , preferably one at the rear and allow the drivers to be fully installed. Once you get usb to show on screen you can then try again.
Click to expand...
Click to collapse
Thanks. how do i put my phone into bootleader mode?
Switch off, hold in vol down button and switch on. Keep vol down pressed in until get to multi-coloured screen. In the bottom section you should see the word "serial" - plug in to pc and this should change to "usb".
Switch phone off, remove battery for min 5 min. Put battery back.
Push down button "volume down" and keep pressed. Dont release it.
Now keeping volume down putton pressed press down power on switch. Keep pressed to this time when you see on your tricolor screen.
Release buttons.
You are on bootloader mode.
Install MAGLDR.
When phone shuts down on reboot keep pressed power button, dont release until you see MAGLDR menu (10 menu points if i right).
Install you preferred nand rom how rom guide tell.
After install phone reboots.
Enjoy your fresh android rom install!
Sorry ClydeB1, you was again faster!
datas0ft said:
Sorry ClydeB1, you was again faster!
Click to expand...
Click to collapse
No worries
ClydeB1 said:
Switch off, hold in vol down button and switch on. Keep vol down pressed in until get to multi-coloured screen. In the bottom section you should see the word "serial" - plug in to pc and this should change to "usb".
Click to expand...
Click to collapse
datas0ft said:
Switch phone off, remove battery for min 5 min. Put battery back.
Push down button "volume down" and keep pressed. Dont release it.
Now keeping volume down putton pressed press down power on switch. Keep pressed to this time when you see on your tricolor screen.
Release buttons.
You are on bootloader mode.
Install MAGLDR.
When phone shuts down on reboot keep pressed power button, dont release until you see MAGLDR menu (10 menu points if i right).
Install you preferred nand rom how rom guide tell.
After install phone reboots.
Enjoy your fresh android rom install!
Sorry ClydeB1, you was again faster!
Click to expand...
Click to collapse
Thank You very much
Problem solved
Gr8 news
ClydeB1 said:
No worries
Click to expand...
Click to collapse
One day i kil your phone over net
datas0ft said:
One day i kil your phone over net
Click to expand...
Click to collapse
Now now, play nice
Long story short, I was attempting my second flash. I followed the steps before and everything was going fine. Now right before i open CWM to install android the MAGLDR ( which is version 1.13 ) gets stuck at "123456GOGOGO".
Now i thought maybe i would start my proccess over but I cannot acces the tricolor screen. I wasnt able to do this in the beginning of my proccess either, when i pulled up my HSPL program on my desktop my computer entered the tricolor screen on its own and I proceeded from there.
Basically i have looked around and have found some ways out of the GOGOGO problem, yet I cannot acces the Tricolor screen using hardware buttons so I am stuck. And its not a hardware issue. In MAGLDR the Vrockers work fine and before I did anything the rockers were working fine in Windows 6.5.
Any Ideas? I have a feeling i got a pretty nice paperweight now.
the normal way to enter the tricolor screen is to turn the phone off then hold the volume down button and momentarily hit the power button.
Also, To keep from getting to the 123456 GOGOGO hold the power button while it is booting normally and you will get to the MAGLDR menu and there you can go to the AD Recovery and flash a new rom.
hunterthehuman said:
Long story short, I was attempting my second flash. I followed the steps before and everything was going fine. Now right before i open CWM to install android the MAGLDR ( which is version 1.13 ) gets stuck at "123456GOGOGO".
Now i thought maybe i would start my proccess over but I cannot acces the tricolor screen. I wasnt able to do this in the beginning of my proccess either, when i pulled up my HSPL program on my desktop my computer entered the tricolor screen on its own and I proceeded from there.
Basically i have looked around and have found some ways out of the GOGOGO problem, yet I cannot acces the Tricolor screen using hardware buttons so I am stuck. And its not a hardware issue. In MAGLDR the Vrockers work fine and before I did anything the rockers were working fine in Windows 6.5.
Any Ideas? I have a feeling i got a pretty nice paperweight now.
Click to expand...
Click to collapse
pull your battery,
put it back in,
hold down volume and power button,
and theres your tricolor screen
True i know about to Volume Down and power key to enter Tricolor, but for some reason with my phone that does not access the Tricolor, tried it many times.
Holding the power button while it booted made no difference.
*******I followed these steps for flashing my rom:*****
First, you need your files!
HSPL4
MAGLDR 1.13
Clockworkmod Recovery
Download a ROM of your choice, I prefer Hyperdroid
Unzip only the first 3 files, and place the ROM zip on your SD card.
So, here we go!
Remember to back up all of your contacts and any data stored on the phone that you want to keep, because you will be wiping windows off ENTIRELY.
HSPL4-
Plug in your phone.
Right click the HSPL4 file and select "Run as Administrator"
Go through the screens, then when it's connecting to your phone your phone will go into bootloader (red, blue, and white screen)
Select HSPL 2.08 when it comes up, hit next. Let it work.
It'll popped up saying "We hacked it!", and you'll see it on your phone. Click yes, then ok and you're done with this step! Phone will restart.
MAGLDR 1.13-
After phone's restarted, go to the MAGLDR folder, right click "ROM Update Utility", and Run as Administrator.
Checkmark the necessary boxes to continue through steps. Then click "Update", then click next through screens.
Once it starts updating ROM image, it taks about 2 minutes. Then click finish.
Phone will reboot into MAGLDR.
Navigate MAGLDR using the volume up and down keys. Use the green button to select (you may have to click twice).
(At this part in the video I uploaded the ROM zip, I'm assuming you already loaded it though, so skipping on).
Flash Clockworkmod_150
Scroll down on MAGLDR to option 5 "USB Flasher". Don't select it yet.
On your computer, go to the Clockworkmod folder, right click the DAF file and run as administrator.
Click next until it gets to waiting for USB.
Now press the green button to put it in the mode.
Text will start to appear on the phone screen, and the Clockworkmod flasher will do its work.
Once done, click finish, and MAGLDR will reboot. It may say something like "kernel fail", it's normal, don't worry about it.
Scroll down to number 8 "AD Recovery", select it.
It'll say Go Go Go Go, and then you'll be in Clockworkmod Recovery!.
****************************************************
BUT! at this point i get stuck in GOGOGO and i have to remove battery.
I JUST got this phone and really want to atleast get it back to Windows Mobile so i can restart my flash.
read the link in my signature...i was there and few of the folks succeeded after completing the process
Hoping it wouldnt come to this but looks like i dont have a choice, hopefully I get a try your method out tomorrow since the success rate looks promising, Ill get back with the results!
Try to reset your phone. Push the red little button on the back near the SD card
I have the HD2 open and have removed the flex cable at the bottom of the phone yet when i connect USB it auto boots so i have to power it down and to do that i have to connect flex cable. once i have the cable connected i power down then i hold the volume button and before i can restart the phoen autoboots from the USB being plugged in so im in a loop.
But i cant boot without the USB being in so Im in a pickle. Again
hunterthehuman said:
I have the HD2 open and have removed the flex cable at the bottom of the phone yet when i connect USB it auto boots so i have to power it down and to do that i have to connect flex cable. once i have the cable connected i power down then i hold the volume button and before i can restart the phoen autoboots from the USB being plugged in so im in a loop.
But i cant boot without the USB being in so Im in a pickle. Again
Click to expand...
Click to collapse
Try this:
- Hold down the vol_down button and don't let go.
- connect the usb, don't let go of the vol_down button
- should go into bootloader
- now let go of the button.
Nope that didnt work either, any OTHER reason my phone wouldnt acces the Tricolor screen? Ive tried everything 100 times.
Guys, help me out. Install the update. Now 8107. Bootloader version 5.9.3.0. I want to install a custom firmware, but in bootloader mode now available only format and back. How do I return /downgrade so that I could safely enter the mode and put the bottles MAGLDR. What will advise. I hope very much for your help
For some reason MAGDLR wouldn't install on my Omnia7 when running Mango. The installer said it succeded, but MAGDLR wasn't installed. Downgrading to NODO and running the tool again fixed the issue for me.
And how can I downgarade to NODO without starting the download mode? The computer now does not see the phone
VovaKa said:
And how can I downgarade to NODO without starting the download mode? The computer now does not see the phone
Click to expand...
Click to collapse
samsung download mode is different to MAGDLR=press and hold volumeUP + cam + power. MAGLD press and hold volumeDown + cam + power + back button
Yes, I understand how to enter the boot mode. The fact that magldr it has never been installed and the system is refreshed by sending cab files.
MAGDLR mode can install on MANGO with no problem.
So I got a stock HD2 from my bro today and decided to put Nand Android on it.
1. I first loaded HSPL 2.08 via HD2TOOL KIT. Everything worked perfect.
2. Then I installed MAGLDR also via HD2TOOL KIT. Got the MAGLDR menu and thought everything was cool. Then I proceeded to shutdown via the last item on the MAGLDR Menu.
3. The HD2 shut itself off. That's when I proceeded to try to turn it back on and got nothing but black screen.
-----so my HD2 right now:
1. Slight vibrate when I long press power button.
2. Stays on black screen with no changes.
3. Cannot get into Tri-color HSPL screen(vol down+pwr).
4. Will not charge
5. When connected to my windows 7 PC, it detects as qualcomm device.
Tried pulling battery, pressing soft reset(no action), Pressing vol up+down+ pwr for hard reset (no action).
Is my hd2 bricked? How is it possible that I bricked it by installing magldr via hd2tool kit?
Any help is appreciated. Thanks guys
//edit: I made a video of what I'm referring to. http://youtu.be/uTPNokbVGus
maniaxzero said:
So I got a stock HD2 from my bro today and decided to put Nand Android on it.
1. I first loaded HSPL 2.08 via HD2TOOL KIT. Everything worked perfect.
2. Then I installed MAGLDR also via HD2TOOL KIT. Got the MAGLDR menu and thought everything was cool. Then I proceeded to shutdown via the last item on the MAGLDR Menu.
3. The HD2 shut itself off. That's when I proceeded to try to turn it back on and got nothing but black screen.
-----so my HD2 right now:
1. Slight vibrate when I long press power button.
2. Stays on black screen with no changes.
3. Cannot get into Tri-color HSPL screen(vol down+pwr).
4. Will not charge
5. When connected to my windows 7 PC, it detects as qualcomm device.
Tried pulling battery, pressing soft reset(no action), Pressing vol up+down+ pwr for hard reset (no action).
Is my hd2 bricked? How is it possible that I bricked it by installing magldr via hd2tool kit?
Any help is appreciated. Thanks guys
//edit: I made a video of what I'm referring to. http://youtu.be/uTPNokbVGus
Click to expand...
Click to collapse
No joke, im gonna say your screen is shot, especially after seeing its shattered. Lol. It honestly sounds like its booting up and working properly. Try putting it in bootloader and plugging it into your computer, like push vol dwn + pwr and hold it for 30 seconds or so. Then see what windows see's it as. It honestly appears to be working (from your video) just that youre not getting and display. If it were bricked, i dont think it would power up or vibrate.
Try opening it up and checking the cables inside to see if they are alright
Thanks for the help guys! I ended up leaving the battery out for 10 min. Put it back in. and everything was back to normal. phew!!!
In trouble :crying:! I was watsApping ,this phone got restarted w/o any reason and while restarting only samsung logo comes then it goes after 3-4 secs.If i try to restart again it does not restart.If i pull out battery and plug it again then again it shows samsung logo and loops the previous actions.
Please help me with this.
no professional enough to answer the query yet?
Hey atleast gimme a advice/suggestion..
Lastly i upgraded it to 7.8 by one of Dynamics 2.0 ROM...
savdeep said:
In trouble :crying:! I was watsApping ,this phone got restarted w/o any reason and while restarting only samsung logo comes then it goes after 3-4 secs.If i try to restart again it does not restart.If i pull out battery and plug it again then again it shows samsung logo and loops the previous actions.
Please help me with this.
Click to expand...
Click to collapse
savdeep said:
Hey atleast gimme a advice/suggestion..
Lastly i upgraded it to 7.8 by one of Dynamics 2.0 ROM...
Click to expand...
Click to collapse
Hi,
Try installing the ROM provided by 'voluptuary' (http://forum.xda-developers.com/show....php?t=1528984 - [ROM] Clean ROM - Stock UI - RTM 8858 Base - Focus v1.3 - 7.8 Official).
Edit: I do not know if you will be able to get back your data. I am using 'voluptuary's ROM and it is pretty clean.
I reverted back to original ROM 2010
Buddy i reverted back to 2010 http://forum.xda-developers.com/showthread.php?t=1131022
but still when it restarted it again gets logged off after samsung logo:crying:
Unokashi01 said:
Hi,
Try installing the ROM provided by 'voluptuary' (http://forum.xda-developers.com/show....php?t=1528984 - [ROM] Clean ROM - Stock UI - RTM 8858 Base - Focus v1.3 - 7.8 Official).
Edit: I do not know if you will be able to get back your data. I am using 'voluptuary's ROM and it is pretty clean.
Click to expand...
Click to collapse
Had same problem - Samsung Logo
savdeep said:
Buddy i reverted back to 2010 http://forum.xda-developers.com/showthread.php?t=1131022
but still when it restarted it again gets logged off after samsung logo:crying:
Click to expand...
Click to collapse
I had the same problem while flashing one of the custom ROMs and whatever I did, the device used to get stuck on Samsung logo screen - blink for a while and turn off and again the Samsung Logo appeared. It would not enter Download mode nor MAGLDR mode. Here is what I did and it worked, I do not know if it will work for you.
Try the following:
1. Check whether you can enter Download Mode - (Vol Up + Camera + Power).
2. If Download Mode appears select Format and Format your device.
3. After Formatting, again enter Download Mode and install MAGLDR (provided in Voluptuary's ROM folder) and flash Voluptuary's ROM (3.10a).
If you are unable to enter Download Mode try this:
1. If you have installed MAGLDR in your mobile earlier, check whether you can enter MAGLDR mode (Vol Down + Camera + Power).
2. Once in MAGLDR mode you can install the ROM 3.10a mentioned above.
For me both did not work initially and here is what i did:
1. Turned off the phone, and connected the USB cable to the device and connected it to my PC - left it for a while (may be - 20 - 30 mins).
2. Samsung Logo was still blinking.
3. Disconnected the USB, turned off the device (Removed the battery and re-inserted). Pressed in held Vol Up + camera and then connected the USB cable, the Samsung logo appeared again and out of frustration i pressed Power button (Vol Up + Camera was still being held) couple of times repeatedly and voot... the phone entered Download mode. First thing I did was to format and re-install the MAGLDR and I proceeded flashing the ROM and now my phone works fine. Don't know what was the main cause yet.
I hope the miracle works for you too.
behind every miracle there is a reason
Tried everything u said...didn help!!!...
Is there someone talented:silly: enough to resolve this issue?
Unokashi01 said:
I had the same problem while flashing one of the custom ROMs and whatever I did, the device used to get stuck on Samsung logo screen - blink for a while and turn off and again the Samsung Logo appeared. It would not enter Download mode nor MAGLDR mode. Here is what I did and it worked, I do not know if it will work for you.
Try the following:
1. Check whether you can enter Download Mode - (Vol Up + Camera + Power).
2. If Download Mode appears select Format and Format your device.
3. After Formatting, again enter Download Mode and install MAGLDR (provided in Voluptuary's ROM folder) and flash Voluptuary's ROM (3.10a).
If you are unable to enter Download Mode try this:
1. If you have installed MAGLDR in your mobile earlier, check whether you can enter MAGLDR mode (Vol Down + Camera + Power).
2. Once in MAGLDR mode you can install the ROM 3.10a mentioned above.
For me both did not work initially and here is what i did:
1. Turned off the phone, and connected the USB cable to the device and connected it to my PC - left it for a while (may be - 20 - 30 mins).
2. Samsung Logo was still blinking.
3. Disconnected the USB, turned off the device (Removed the battery and re-inserted). Pressed in held Vol Up + camera and then connected the USB cable, the Samsung logo appeared again and out of frustration i pressed Power button (Vol Up + Camera was still being held) couple of times repeatedly and voot... the phone entered Download mode. First thing I did was to format and re-install the MAGLDR and I proceeded flashing the ROM and now my phone works fine. Don't know what was the main cause yet.
I hope the miracle works for you too.
Click to expand...
Click to collapse