Latest CM+Matr1x+Gapps issue? - Nexus 4 Q&A, Help & Troubleshooting

For some reason, I can't flash the latest cm, matrix or gapps on 4.2.2 (or even 4.3 before i switched back) without getting stuck on the black screen after the google screen..
I had to revert to CM10.1.2, Matr1x 9.5 & Gapps 20130812..
The latest versions I tried were CM10.1.3, Matr1x 11 & Gapps 20130813 both from stock 4.3 as well as stock 4.2.2 (bootloader unlocked & rooted of course)
It isnt that big of a deal.. I just want to know why this is happening..

bump

try a different gapps.

Related

[Q] Paranoid Android w/ wrong GAPPS

Last month, I accidentally flashed PA 3.69 (because I wanted a 4.2.2 stable build) with the CM/AOKP 4.2.2 GApps on my T-Mo Samsung Galaxy S2 and everything is working fine with no problems. I flashed PA 3.69 with the matching PA Gapps on my Nexus 4 but I don't like how the PA Gapps work/look. If I wanted to use the other GApps how would I go about this? And what known bugs/problems are there for doing this?
Sorry for my first world problem and thanks in advance for your help/input
bonjourdexter said:
Last month, I accidentally flashed PA 3.69 (because I wanted a 4.2.2 stable build) with the CM/AOKP 4.2.2 GApps on my T-Mo Samsung Galaxy S2 and everything is working fine with no problems. I flashed PA 3.69 with the matching PA Gapps on my Nexus 4 but I don't like how the PA Gapps work/look. If I wanted to use the other GApps how would I go about this? And what known bugs/problems are there for doing this?
Sorry for my first world problem and thanks in advance for your help/input
Click to expand...
Click to collapse
Just take the PA gapps and flash them. They should replace the current ones.

[Q] Official AOKP users

Hello,
Tried many custom roms but usually end up coming back to the offical AOKP rom for the N4. I like the options and speed of the rom, find it very stable and use the theme engine. I haven't tried their 4.3 roms as they are all nightlies and I am always led to believe these are a bit risky for using as a daily driver. I use my phone for work and important things.
I have stayed with 4.2, but the only issue I have found is that the camera flash does not work. I have tried the latest stable 4.2 release, but then under instruction by aokp him/herself flashed the last 4.2 nightly as I was told there was a camera fix for that release. This was a clean install, I wiped and flashed.
Unfortunately I still cannot get the camera flash to work. I know my phone is not faulty as the flash works fine in Beanstalk, CM and other roms.
Anyone else experienced this?
The nightly releases for AOKP 4.3.1 are stable. Just make s nandroid backup and install them.
sent via tapatalk
ThemeManager crash with Franco/Hells kernel
Hi,
Did anyone had issue with ThemeManager. It's crashing always while restarting phone. I tried Franco/Hells kernel and it happens on both. It's working correctly on standard kernel. I tried to set up stock theme/clean data in application. Nothing helps.

[Q] Nexus 4 Update from CM 10.2 to CM 11 Bootloop

Hi all,
My specs are as follows:
1. Got a Nexus 4 with Android 4.3
2. Did a Sideload update to 4.4 and did not like what I saw )
3. Installed CyanogenMod 10.2 -20131114-SNAPSHOT-InstallerWPPQ46R-Mako via CyanogenMod Installer (screenshot attached)
4. Flashed the 4.3 radio via WUG's Nexus Root Toolkit because I did not have wifi.
I have CWM 6.0.4.3 that came preinstalled with the CM 10.2
I tried to do an update so I flashed the cm-11-20131205-SNAPSHOT-M1-mako.zip and the kitkat gapps via this process:
1. Booted to recovery
2. Wipe Cache
3. Wipe davlik
4. Installed Rom
5. Insalled Gapps
6. Wipe Cache
7. Wipe Davlik
The result was a "beautiful" bootloop. I like the new CM logo BTW )
Reading through some similar threads I came across several pieces of advice:
1. Update the recovery as the verion of recovery that comes with CM 10.2 is unable to flash CM 11.
Is the recovery from here an option?
2. One was to install a fresh version of kitkat and then install CM 11 which I don't fancy
3. Wipe data from device.
Could I get your input on how exactly can I proceed in order to get a fully working version of CM11 on my Nexus4?
Thanks a million
Andrei
Nobody with this problem?
no one has had this issue?
Updated to CM 10.2 Stable
In the meantime I updated to CM 10.2 stable version and also updated recovery to CWM Touch 6.0.4.5 from the link in the first post of this thread. Strangely enough now I am receiving information about update builds, even to the CM11 Snapshot.
As fellow Nexus 4 Users, which do you recommend: TWRP or CWM?
Thanks!
help
andreitudose said:
In the meantime I updated to CM 10.2 stable version and also updated recovery to CWM Touch 6.0.4.5 from the link in the first post of this thread. Strangely enough now I am receiving information about update builds, even to the CM11 Snapshot.
As fellow Nexus 4 Users, which do you recommend: TWRP or CWM?
Thanks!
Click to expand...
Click to collapse
Do you already did it upgrade to "cm11"? if so how did you do?
dan_flo10 said:
Do you already did it upgrade to "cm11"? if so how did you do?
Click to expand...
Click to collapse
Nope, just upgraded today to 10.2.1, the last stable version of cm10, released on the 3rd of Feb. I didn't upgrade to CM11, but when I get bored I will I was on kitkat before and it did not impress...
I think you need to update the baseband
To flash a 4.4 based rom you gonna need :
1-latest selinux compatible recovery.
2-latest bootloader, ver makoz30d .
3-.97 or .98 radio.
Radio and bootloader you can find in googles stock img for mako, extract them and flash via fastboot or find them on xda in a form of flashable zip file.
After all 3 stages you will be able to flash cm11 without a problem, note that a full wipe is highly recommended when coming from 4.3 roms.
Good luck buddy.

[Q] Upgrading to 4.4 from 4.2, Questions

XDA,
I am currently running PA 3.69 (Android 4.2.2) with stock PA kernel and a .48 modem, and I am looking to flash the new CM11 M3 snapshot (4.4) with franco.Kernel and put on MultiROM with Ubuntu Touch. I have been out of the custom ROM scene for a while and I would like to make sure I get this right the first time.
Do I need to flash a 4.4 modem before I update the OS? Then, do I just flash the .ZIP from CM's website from within CWM? Or should I grab a factory image from Google and start from there?
Also, should I flash the franco.Kernel immediately after rebooting into the ROM, or does it not matter? I had problems with flashing kernels on my old phone after the OS had already been running for a long time.
Thanks in advance to all of you guys, you're an awesome community to be a part of.
cpkelley94
Both kk modem and bootloader aren't mandatory but they are recommended
While you're in recovery flash the desired kernel after the rom but also you can do it after reboot
And... There are help threads here where you can start rather than opening another topic
sent from my Darkside of Nexus 4

[Q] Weird Colors after installing Franco Kernal

Hey guys,
I'm running the unofficial Cyanogenmod 11S on my Nexus 4 and just flashed Franco Kernel and am getting weird colours now. My screen also blinks at random times, anyway to fix this without factory resetting? Thanks
Flash your rom again without Franco kernel. It's the kernel that causes this behavior. Just re-flash your current rom/nightlie zip or whatever and it should be fine.
--
Wrong version of kernel used
I think most likely you have used the wrong kernel or not following installation instructions.
Whenever opt to install kernel, do look into the requirements:
a. for which version of android (4.4.4 ? 4.4.2? 5.0?)
b. what type of release of android (Cyanogenmod (CM/CAF)? AOSP? MIUI?)
c. installation method and steps (some kernels required to flash on top of stock kernel)
For now I would suggest that you find out the version and release of the android that you using currently and just flash the suitable kernel for it. The way i see it, you are using a cyanogenmod (CM), a CM compatible kernel will do.

Categories

Resources