[Q] Weird Colors after installing Franco Kernal - Nexus 4 Q&A, Help & Troubleshooting

Hey guys,
I'm running the unofficial Cyanogenmod 11S on my Nexus 4 and just flashed Franco Kernel and am getting weird colours now. My screen also blinks at random times, anyway to fix this without factory resetting? Thanks

Flash your rom again without Franco kernel. It's the kernel that causes this behavior. Just re-flash your current rom/nightlie zip or whatever and it should be fine.

--

Wrong version of kernel used
I think most likely you have used the wrong kernel or not following installation instructions.
Whenever opt to install kernel, do look into the requirements:
a. for which version of android (4.4.4 ? 4.4.2? 5.0?)
b. what type of release of android (Cyanogenmod (CM/CAF)? AOSP? MIUI?)
c. installation method and steps (some kernels required to flash on top of stock kernel)
For now I would suggest that you find out the version and release of the android that you using currently and just flash the suitable kernel for it. The way i see it, you are using a cyanogenmod (CM), a CM compatible kernel will do.

Related

[Q] Official AOKP users

Hello,
Tried many custom roms but usually end up coming back to the offical AOKP rom for the N4. I like the options and speed of the rom, find it very stable and use the theme engine. I haven't tried their 4.3 roms as they are all nightlies and I am always led to believe these are a bit risky for using as a daily driver. I use my phone for work and important things.
I have stayed with 4.2, but the only issue I have found is that the camera flash does not work. I have tried the latest stable 4.2 release, but then under instruction by aokp him/herself flashed the last 4.2 nightly as I was told there was a camera fix for that release. This was a clean install, I wiped and flashed.
Unfortunately I still cannot get the camera flash to work. I know my phone is not faulty as the flash works fine in Beanstalk, CM and other roms.
Anyone else experienced this?
The nightly releases for AOKP 4.3.1 are stable. Just make s nandroid backup and install them.
sent via tapatalk
ThemeManager crash with Franco/Hells kernel
Hi,
Did anyone had issue with ThemeManager. It's crashing always while restarting phone. I tried Franco/Hells kernel and it happens on both. It's working correctly on standard kernel. I tried to set up stock theme/clean data in application. Nothing helps.

[Q] Upgrading to 4.4 from 4.2, Questions

XDA,
I am currently running PA 3.69 (Android 4.2.2) with stock PA kernel and a .48 modem, and I am looking to flash the new CM11 M3 snapshot (4.4) with franco.Kernel and put on MultiROM with Ubuntu Touch. I have been out of the custom ROM scene for a while and I would like to make sure I get this right the first time.
Do I need to flash a 4.4 modem before I update the OS? Then, do I just flash the .ZIP from CM's website from within CWM? Or should I grab a factory image from Google and start from there?
Also, should I flash the franco.Kernel immediately after rebooting into the ROM, or does it not matter? I had problems with flashing kernels on my old phone after the OS had already been running for a long time.
Thanks in advance to all of you guys, you're an awesome community to be a part of.
cpkelley94
Both kk modem and bootloader aren't mandatory but they are recommended
While you're in recovery flash the desired kernel after the rom but also you can do it after reboot
And... There are help threads here where you can start rather than opening another topic
sent from my Darkside of Nexus 4

[Q] SM-9005 Kernel Issue

Dear All,
My Device Currently running on
Android 4.4.4 Custom ROM CM11 snapshop M8.
I've tried to flash the kernel to lean kernel.
http://forum.xda-developers.com/showthread.php?t=2488082
However, after i flash the kernel the screen went black after Samsung logo screen.
Is there any thing i miss out doing?
I wipe cache and dalqiv cache before I flash the kernel.
Any enlighten would be great. Sorry to post here as I couldnt google any relevant information to aid me.
Thanks in advance
lightman66 said:
Dear All,
My Device Currently running on
Android 4.4.4 Custom ROM CM11 snapshop M8.
I've tried to flash the kernel to lean kernel.
http://forum.xda-developers.com/showthread.php?t=2488082
However, after i flash the kernel the screen went black after Samsung logo screen.
Is there any thing i miss out doing?
I wipe cache and dalqiv cache before I flash the kernel.
Any enlighten would be great. Sorry to post here as I couldnt google any relevant information to aid me.
Thanks in advance
Click to expand...
Click to collapse
Try downloading leanKernel 3.1 AOSP version.
Usually because lean and temasek updates very often due to commit changes, their newer kernels usually break older versions of CM by showing a black screen after you see SAMSUNG GALAXY NOTE 3.
The old(er) kernels will work for sure, don't use the latest update. If a previous update doesn't work, move back a step.

[Q] Custom rom in bootloop ?

I have build from source CM12 and when I flashed the ROM it is in an infinite loop in the GOOGLE logo. I have done everything correctly.
I installed a CM12.1 build and there is no problem.
Flashed factory images of 5.0, 5.02 an 5.1.1 and then flashed my build but still it is in loop. No problem when I flash a CM12.1 build.
Can you point out what I did wrong ?
Sounds like kernel mismatch or misbuild to me. Really difficult to say more without looking over your shoulder during the build.
I build it twice, but still same problem.
Flash a prebuilt kernel over your custom build and see if it boots the ROM, then you know something is wrong with the kernel build and not the ROM if it boots.
Otherwise personally I don't know why you can't just use the built ROM flashable and not a self compiled version, unless you're trying to get into learning how to build roms?
fwayfarer said:
Flash a prebuilt kernel over your custom build and see if it boots the ROM, then you know something is wrong with the kernel build and not the ROM if it boots.
Otherwise personally I don't know why you can't just use the built ROM flashable and not a self compiled version, unless you're trying to get into learning how to build roms?
Click to expand...
Click to collapse
Ya, I'm learning to build ROMs.

Can't flash Custom Kernel

I tried flashing Fusion Kernel twice. First one was through fastboot, and gave me error. Something about strings & such. Second one is through TWRP. Flashed successfully but doesn't boot up at all.
Using Z00LD (Used kernel Z00L)
Custom Rom is CyanogeMod 13 latest one.
Help me plox
That's an outdated kernel. It won't work on latest cm13 builds. Check the last few pages of that kernel thread to know which build is supported.

Categories

Resources