Hi everyone. I'm new with my XDA1.
I've download this file XDA-developers-SER-v12 and XDAtools.
Still cann't install to my XDA1 since there are no clear instruction.
Can someone guide me or tell me where can i get the instructions please.
Thanks.
if you already have the SER12.exe ... connect your device to the USB cradle and power ... after sync just run the exe file and follow the screen instructions
Note: better to remove the SIM card before
Still cann't install the XDA-developers-SER-v12
Error message said "cann't access the ROM files" :?
Is it i'm missed out some steps?
Please help!!!
what's your current ROM and bootloader versions ?
Need Help
I use to get a error msg while i run some programs after installation. Plz help me where i can find these missing files or give any solution to rectify it
The error msg is :" File or assembly name 'Microsoft.WindowsMobile.Status,Version=1.0.0.0,
Culture=neutral,PublicKeyToken=31BF3856Ad364E35', or one of its dependencies,was not found"
I m using O2 XDA Mini Pocket PC Windows Mobile 2003 Second Edition
Thanx in advance
hello guys...
i have recently got the charmer but i am unable to install any cab or other file on the phone. it shows an error " .... is not a valid windows CE setup file'' so what am i missing. i will be thankful for ur help.
You are using the wrong cab files guy.
Hello,
I've tried to reload my TYTN with Vanilla Rom to resolve the 'no gsm' message on it. During the flash, Usb link is lost and now when I turn on the PDA, I've just the screen above.
Now, the USB port don't work, when I connect the PDA on PC it don't see it. Maybe it is possible to restore it with SD card but how?
Thank you for your help an sorry for my bad english (french...)
Hello,
Nobody coud help me?
Or is that mean than my TYTN is definitely out?
Thanks.
get a storage card less than 2GB, format it and in your PC rename the Signed.nbh file to HERMIMG.nbh. Insert the storage card and put the device in bootloader mode it will start the flash from the sd card
Thanks a lot +QuePPC.
I 've execute your instructions, it better but after bootloader, I have wrote in blue on white screen 'loading', few seconds after 'checking' and finally '00028002' 'not allow'.
After that, the pda return on 4 colored blocs, on the upper (red) there is writting :
in white : HERM200 IPL-1.00
in yellow : HERM200 SPL-1.04
On the lower bloc (white) 'Serial'
When I reset the pda, I have these instructions at the bottom of the screen :
M 05
B 04 No GSM
B 05 D 3.22.0.0
Maybe this malfunction is due to a wrong rom but how identifie the right rom and where found it ?
Maybe it's due to the hardspl not installed but how install it wihout usb connection. ActiveSync don't connect the pda.
Thanks a lot for your help, have a good day.
Hello,
After researchs on the forum, to restore my tytn, first I must reinstall the original rom but ... i haven't it in archiv.
Is somebody could tell me where find the french rom htc tytn wm5 (3-22-0-0 I think)
Thanks a lot.
Sisise said:
Hello,
After researchs on the forum, to restore my tytn, first I must reinstall the original rom but ... i haven't it in archiv.
Is somebody could tell me where find the french rom htc tytn wm5 (3-22-0-0 I think)
Thanks a lot.
Click to expand...
Click to collapse
you can start searching at .... http://shipped-roms.com/shipped/Kai....0_radio_sign_25.83.40.02_1.65.17.56_Ship.exe
I have a HTC ELF 0300 it is stucking in the tri colour screen with the following
IPL: 2.26.0002
SPL:2.28.0000
i have followed the advice i found on this forum of flashing the ROM but when i try the rom update utility it comes up with error 270 about the image also i tried the mtty process but it wont open the usb port
i tried flashing the SD Card but it then says "Invalid Certificate"
i'm a total loss and totally stuck..
any help appricated
Have you really read this sticky thread http://forum.xda-developers.com/showthread.php?t=406721 before flashing ?
Have you used "search" function with f.e. "stuck in bootloader" before posting ?
If not, please do and you'll find very useful solutions
i have read the theads over and over again and finally worked out mtty and worked out my phone is
elf0300
tmob050
it's still in tri colour mode yet i cant find a rom for it...
i tried the nbh file flashing to the memory card
but no luck....
heelllp
Do you know if you have Elf or Elfin?
It is essential for flashing original Rom Elf: http://forum.xda-developers.com/showpost.php?p=2045325&postcount=2
Elfin: http://forum.xda-developers.com/showpost.php?p=2045051&postcount=1
i haave an elf (p3450) well thats what it says on my box
i cant find the orginal rom for this and i'm totally stuck
any help is greatrully recived
also i have tried CID unlocking it so i can put custom roms on it but my computer wont active sync when the phone is connected through the USB port...
Also, what did you do to get your phone stuck in bootloader in the first place?
my brother did it to my phone before i'd even had chance to use it , and i don't know what he did.....sorry x
Try this and follow the instructions exactly http://forum.xda-developers.com/showthread.php?t=347700 and report pls
i tried this yesterday at first when i pressed enter i didnt get >cmd (which is what happening now)
then when i do get it eventually after many tries it sasys
cmd55 or something failed
and stays on 0% on a gray screen
sorry if i sound stupiud.
Ok
First you connect your device, then right click on active sync icon on your computer, chose connection settings and change according to the instructions then continue with mtty.exe
i have done this
when i press enter i dont get anything come up....
yesterday i managed to get it up though and just stayed gray screen at 0%
Try again a few times making sure you didn't overlook any detail.
I just found this http://forum.xda-developers.com/showpost.php?p=3395787&postcount=155 possibly mtty version doesn't work
2- Another possibility is unbricker rom http://forum.xda-developers.com/showthread.php?t=446242
3- gold card method (the links are dead so you should pm Dsixda)
Flash from the SD card:
ELF0IMG.nbh on a FAT32 filesystem, complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
1. Format microSD card from your computer.
2. Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
3. Rename the .NBH file to ELF0IMG.nbh and copy it to the root folder of your microSD card.
4. With microSD card inserted in the phone, start the bootloader (the bootloader is invoked by hold down the camera button and reset device with the stylus).
5. Confirm flashing on screen by pressing the power button (or the volume slider down).
6. Flashing might hang after some time but this is normal. Just wait.
Will try now and keep u updated
manny thanks x
Follow the instructions until you get cmd only, then return to the tutorial to continue
Good luck
Just an update
i downloaded the nbh file you sugested and tried both
1) flashing from the SD card by renaming file - when i do this is says checking sd contents then goes back to my bootlooder screen
2) running the romupdateutility.exe with the nbh file in the same folder it goes through then i get error 294 incorrect vender
i am unable to pm Dsixda about the gold card
i have no idea what else to try
ps: when running mtty i still get a gray screen then the bootloader screen.
Sorry to hear this, I'm out of ideas. Just some details not to miss:
try a hard reset
writing "ELF0IMG.nbh" (elf zero img and not elf o img)
google for mtty and download a few versions
Wait for an answer from Dsixda for gold card if you can't find your original rom
Creating your GoldCard
I don't remember well the procedure but you can try the following:
If you have access to a working pda or a working GPS device - PNA which is powered by WM (even modified) then you have to follow these steps:
Download this package and save it in your C:\ drive.
Run it.
(it will extract all the necessary files in C:\itsutilsbin (folder) and it will start the setup of Perl)
When the Perl - installation is finished run Perl Package Manager from Windows Start Menu.
Add repositories.
Name: itsme
Location: http://www.xs4all.nl/~itsme/projects/perl/ppm
Name: theoryx
Location: http://theoryx5.uwinnipeg.ca/ppms/package.xml
(HowTo: run Preferences from the Perl Package Manager menu and switch to the repository tab)
After database synchronization install these packages:
Crypt-DES
XdaDevelopers-NbfUtils
(HowTo: at the main window of Perl Package manager find those packages, mark them for install (the icon with green plus, next to the search bar) and run marked action(green arrow icon))
Format the sd card(FAT32) and insert it in a working pda.
Connect the working pda to the pc , wait to sync and run psdread.bat from C:\itsutilsbin.
Find an official rom from here with a ModelID which matches your device's one
Example: If your pda is an Elfin and you have ModelID ELF030000 then get the below rom from that thread.
RUU_Elfin_TMO_NL_2.26.114.52_4.1.13.52_03.08.90_BL UE_Ship.exe (T-MOBILE)
Device: ELF030000
CID: T-MOB003
Version: 2.26.114.3
Language: NLD
Click to expand...
Click to collapse
Extract the RUU_Signed.nbh, rename it to ELF0IMG.nbh and copy it to the sd card.
Fully charge your battery, insert the sd card to your pda, enter bootloader and flash from memory card
(Confirm flashing on screen by pressing the power button (or the volume down button)).
If everything went ok then you can use a HardSPL or a USPL to CID Unlock your phone and update the rom with one of your choice.
If you don't have a working pda use a card reader - Ubuntu (even from a LiveCD) and QMAT are required
Regards!
i don't have a working pda to use :-( the only pda i have is my bricked one :-(
buncie2010 said:
i don't have a working pda to use :-( the only pda i have is my bricked one :-(
Click to expand...
Click to collapse
There is a way to use a card reader instead.
Using Ubuntu LiveCD and QMAT
ps:I wonder how did the wiki entry got erased?
Dsixda and all the members who worked on this had done a great job and it's really annoying that all their work was lost.