Database Users

[Q] kernel question

if i download a rom than a kernel. than i download a different a rom will i have that kernel i download.

danzelcool said:
if i download a rom than a kernel. than i download a different a rom will i have that kernel i download.
Click to expand...
Click to collapse
You'll have to reflash that kernel on the new rom
Good thread you might wanna look at.. Lots of helpful information..
http://forum.xda-developers.com/showthread.php?t=2295557
Sent from my GOLDENEYED AT&T S4

rcklss1 said:
You'll have to reflash that kernel on the new rom
Good thread you might wanna look at.. Lots of helpful information..
http://forum.xda-developers.com/showthread.php?t=2295557
Sent from my GOLDENEYED AT&T S4
Click to expand...
Click to collapse
how do i go back to the stock kernel on the rom i download the kernel

danzelcool said:
how do i go back to the stock kernel on the rom i download the kernel
Click to expand...
Click to collapse
The new ROM will come with its own kernel.. If you want to use your downloaded kernel you have to reflash it.. If you want to go back to the stock att kernel it can be found in that thread I linked to
Sent from my GOLDENEYED AT&T S4

Either someone has to provide a stock flahsable kernel if the ROM comes packed with a different one. Or you have to run a stock based ROM packed with the stock kernel..
If that doesn't answer your question I dont get what your asking then...
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

Android 4.3 Coolboy rom question

Hello,
i use this rom http://forum.xda-developers.com/showthread.php?t=2352258
got a question is the ktoonez kernel or adam kernel or perseus kernel works.
if not what kernel works for this rom? stock android delivers less battery then stock
thanks

andreasambrosius said:
Hello,
i use this rom http://forum.xda-developers.com/showthread.php?t=2352258
got a question is the ktoonez kernel or adam kernel or perseus kernel works.
if not what kernel works for this rom? stock android delivers less battery then stock
thanks
Click to expand...
Click to collapse
I'm using Faux Kernel
http://forum.xda-developers.com/showthread.php?t=2273437
In particular you have to download this for Coolboy rom:
Google Edition (GT-9505G): http://faux.androidro.ms/jgedlte/jb43/
You can find all kernel into this page (always updated). You have to read "GE" into the title for compatibility.
http://forum.xda-developers.com/showthread.php?t=2401320

Thread closed as it will lead to being a "Best kernel" type thread.

Percy G2 Kernel

Anyone Plz give me a valid download link of percy g_2 kernel... I cant find it here... every link is broken...

I have only form 4shared http://www.4shared.com/zip/7KU2Dq8gce/cyanogenmod2_modded_by_devilyu.html

not working noww
please fix it

mms047 said:
Anyone Plz give me a valid download link of percy g_2 kernel... I cant find it here... every link is broken...
Click to expand...
Click to collapse
cm kernel in odin form and stock version kernel
http://forum.xda-developers.com/showthread.php?t=2176015
cm kernel in flashable zip form this thread here
http://www.mediafire.com/download/4i7h0la88dgy28a/CyanogenMod#2.zip
note only use this kernel on roms that are based on percys cm7 - do not use it on roms that are based on biels cm7 as wifi and bluetooth will not work
only use the stock kernel on stock based roms

[Q] no network, ios8 rom

hello, I completely follow the steps in the video and I have a problem. It don't have a network, I have a question, could it be the kernel or the rom...
this is the video by sir khizar ali, https://www.youtube.com/watch?v=j0MQMhEACbA
How can i fixed the problem?
Should I try another kernel???

AYA88 said:
hello, I completely follow the steps in the video and I have a problem. It don't have a network, I have a question, could it be the kernel or the rom...
this is the video by sir khizar ali, https://www.youtube.com/watch?v=j0MQMhEACbA
How can i fixed the problem?
Should I try another kernel???
Click to expand...
Click to collapse
This rom is based on cm7 - you must use a cm7 kernel that supports the Base rom
If you have no signal you may want to update your stock rom baseband by flashing the latest modem file for your region - see my firmware thread at top of Dev section or link in signature

marcussmith2626 said:
This rom is based on cm7 - you must use a cm7 kernel that supports the Base rom
If you have no signal you may want to update your stock rom baseband by flashing the latest modem file for your region - see my firmware thread at top of Dev section or link in signature
Click to expand...
Click to collapse
sir, what kernel should I use to this rom?
the kernel link in the video was blocked due to "copyright"..
I dont know what is the kernel used..
Do you know what kernel was used?
If no, then what alternative kernel shall I use to flash the rom?
Thanks sir,

AYA88 said:
sir, what kernel should I use to this rom?
the kernel link in the video was blocked due to "copyright"..
I dont know what is the kernel used..
Do you know what kernel was used?
If no, then what alternative kernel shall I use to flash the rom?
Thanks sir,
Click to expand...
Click to collapse
Either
http://forum.xda-developers.com/showthread.php?t=2673603
Or
Percy #2 cm kernel (Google it)
probably says in video but can't be bothered to watch it

marcussmith2626 said:
Either
http://forum.xda-developers.com/showthread.php?t=2673603
Or
Percy #2 cm kernel (Google it)
probably says in video but can't be bothered to watch it
Click to expand...
Click to collapse
thank you sir for the time and effort,

lg e610 kernel with init.d

hello guys ,
im searching for lg e610 kernel with init.d support.
where i can find one ?
thanks.

ismainau said:
hello guys ,
im searching for lg e610 kernel with init.d support.
where i can find one ?
thanks.
Click to expand...
Click to collapse
you can enable init.d by this way
http://forum.xda-developers.com/showthread.php?t=1710980

it doesn't work
it doesn't work , i've found the file on another site because the link is dead . after i flashed it with clockwordmod it didn't work.
please help
for information i have a custom rom : i have cyanogenmod 11-2014013-UNOFFICIAL-e610
--- 3.4.0-CM

ismainau said:
it doesn't work , i've found the file on another site because the link is dead . after i flashed it with clockwordmod it didn't work.
please help
for information i have a custom rom : i have cyanogenmod 11-2014013-UNOFFICIAL-e610
--- 3.4.0-CM
Click to expand...
Click to collapse
you enable inti.d by type a code in post-boot.sh file on the link above
and you can try flash Skernel or monster kernel

didn't work
i edited the post_boot and it didn't work .
do you think thoses custom kernels would work with my custom rom ?
that's the link of my custom rom : http://forum.xda-developers.com/showthread.php?t=2519448
i need a good custom kernel compatible with my rom that has init.d support.
thanks in advance.

use the kernel that OP give in thread of the rom or use Skernel or monster kernel, and i think all version from beta 9 or above is support init.d

SMILEVN said:
use the kernel that OP give in thread of the rom or use Skernel or monster kernel, and i think all version from beta 9 or above is support init.d
Click to expand...
Click to collapse
tried all of your sollutions , none of them works

hmm
i don't have any init.d problem in beta 11, just flash rom and gapps, then flash mod and tweak i want
How do you test init.d work???

SMILEVN said:
hmm
i don't have any init.d problem in beta 11, just flash rom and gapps, then flash mod and tweak i want
How do you test init.d work???
Click to expand...
Click to collapse
with universal init.d