hi.
i have a galaxy s4 gt-i9505 with twrp 2.6.3.0 as my recovery and i tried to wipe data, system, cache and dalvik cache so i can install cyanogenmod 10.2 and its gapps and when i did that it said formating using ... somthing i can rememmber and it just rebooted by its self and all i got was the gt-i9505 screen so i went back to the recovory and i tried installing cm but it said it faild so i tried doing the wipe again and now it says unable to mount and i tried to flash cm and the gapps and they were both succseful but when i rebooted it went back to the gt-i9505 screen again. please help
lilfreak232 said:
hi.
i have a galaxy s4 gt-i9505 with twrp 2.6.3.0 as my recovery and i tried to wipe data, system, cache and dalvik cache so i can install cyanogenmod 10.2 and its gapps and when i did that it said formating using ... somthing i can rememmber and it just rebooted by its self and all i got was the gt-i9505 screen so i went back to the recovory and i tried installing cm but it said it faild so i tried doing the wipe again and now it says unable to mount and i tried to flash cm and the gapps and they were both succseful but when i rebooted it went back to the gt-i9505 screen again. please help
Click to expand...
Click to collapse
Hi there,
Sounds like your phone has gone into bootloop......all I can suggest at the moment is to put your phone back into recovery......Wipe again and try again.....If that fails try changing recovery to CWM and try that? CWM recovery here I would suggest using odin .tar method.
Related
I flashed the Team Win Recovery Project 2.5.0.3 on stock rom yesterday and now android begun to lag, so I tried to reboot It an now I'm stuck on the bootscreen with the Galaxy S4 logo...
Recovery and download mode still works. I also tried a full wipe but there I get this error:
Code:
E: error: opening /data/data
E: error: I/O error
Maybe caused by FolderMount or such apps, which I tested some days ago?
Does someone know a solution?
I'll try to flash the stock rom again with Odin, as soon as the rom is downloaded...1.6gb
Perhaps you deleted or edited something by accident. So if you boot into recovery and try wipe data/factory reset you get an error? Usually with a bootloop wiping the data and reflashing a stock ROM worked well. Try flash the stock ROM and then try wipe data/factory reset then see if you can boot fine.
Sent from my GT-I9505
one onlesVi
Well, I flashed now the stock rom and first I did a data wipe, which worked fine and then I tried to wipe the cache, but the process crashed with a dead droid(?). The phone has automaticly rebootet now and android seems to work fine. Is this a good or bad sign? ^^
Hi all !
Since yesterday I'm not able to flash any ROM on my I9505. This is what happened.
Yesterday I was flashing a ROM (PACman) and on that ROM I was getting a lot of FC
so I decided to put my previous ROM back on my phone (FoxHound). After the Aroma install,
my phone reboots and keeps stuck at the splash ''Samsung'' logo screen.
This is driving me crazy. I tried to flash different ROMs with no success..
I couldn't boot my phone up, couldn't access recovery, only download mode.
After I flashed a stock firmware with Odin, I can boot up and use my phone properly.
I only can't flash any other ROMs anymore, cause it will cause my phone to keep stuck
at the ''Samsung'' logo..
Someone got a solution? Or is someone having the same problem?
Bhagwanie said:
Hi all !
Since yesterday I'm not able to flash any ROM on my I9505. This is what happened.
Yesterday I was flashing a ROM (PACman) and on that ROM I was getting a lot of FC
so I decided to put my previous ROM back on my phone (FoxHound). After the Aroma install,
my phone reboots and keeps stuck at the splash ''Samsung'' logo screen.
This is driving me crazy. I tried to flash different ROMs with no success..
I couldn't boot my phone up, couldn't access recovery, only download mode.
After I flashed a stock firmware with Odin, I can boot up and use my phone properly.
I only can't flash any other ROMs anymore, cause it will cause my phone to keep stuck
at the ''Samsung'' logo..
Someone got a solution? Or is someone having the same problem?
Click to expand...
Click to collapse
After flashing a rom Try wipe cache , dalvik reboot should work
if not wrkng then try flashing rom factory reset , wip cache , dalvik reboot
if u are using PHILZ recovery no plm but if u have other recovery have PHILZ that will be a solution
123hiten said:
After flashing a rom Try wipe cache , dalvik reboot should work
if not wrkng then try flashing rom factory reset , wip cache , dalvik reboot
if u are using PHILZ recovery no plm but if u have other recovery have PHILZ that will be a solution
Click to expand...
Click to collapse
Hi 123hiten,
Thank you for your reply.
- I flashed FoxHound ROM, wiped cache and dalvik cache. No success..
- I did a factory reset, wiped dflashed FoxHound ROM again, wiped cache and dalvik cache. No success.
- I flashed PhilZ recovery, did a wipe data/factory reset, flashed FoxHound ROM again, wiped cache and dalvic cache.. and again no succes..
I didn't understand what u meant in your last sentence with ''plm''?
I tried to flash the PACman ROM again, and it worked, but still I'm getting Force Close when someone calls me or if I'm trying to call someone.
I really dont know what to do now..
Bhagwanie said:
Hi 123hiten,
Thank you for your reply.
- I flashed FoxHound ROM, wiped cache and dalvik cache. No success..
- I did a factory reset, wiped dflashed FoxHound ROM again, wiped cache and dalvik cache. No success.
- I flashed PhilZ recovery, did a wipe data/factory reset, flashed FoxHound ROM again, wiped cache and dalvic cache.. and again no succes..
I didn't understand what u meant in your last sentence with ''plm''?
I tried to flash the PACman ROM again, and it worked, but still I'm getting Force Close when someone calls me or if I'm trying to call someone.
I really dont know what to do now..
Click to expand...
Click to collapse
Hi.
"plm" = problem
What firmware does your phone say it has got?
malybru said:
Hi.
"plm" = problem
What firmware does your phone say it has got?
Click to expand...
Click to collapse
I don't know where to see that, but I'm sure it's XXUBMF8.
That's the stock firmware I flashed.
Bhagwanie said:
Hi all !
Since yesterday I'm not able to flash any ROM on my I9505. This is what happened.
Yesterday I was flashing a ROM (PACman) and on that ROM I was getting a lot of FC
so I decided to put my previous ROM back on my phone (FoxHound). After the Aroma install,
my phone reboots and keeps stuck at the splash ''Samsung'' logo screen.
This is driving me crazy. I tried to flash different ROMs with no success..
I couldn't boot my phone up, couldn't access recovery, only download mode.
After I flashed a stock firmware with Odin, I can boot up and use my phone properly.
I only can't flash any other ROMs anymore, cause it will cause my phone to keep stuck
at the ''Samsung'' logo..
Someone got a solution? Or is someone having the same problem?
Click to expand...
Click to collapse
try this method...WIPE FACTORY RESET...WIPE CACHE PARTITION ...advanced > WIPE DAVILIK CACHE and BATTERY STATS...and then go to MOUNT AND STORAGE and FORMAT SYSTEM...and thn try to install the rom hope it will work
Hi there
I seem to have a problem flashing 4.3 roms, actually any rom that isn't stock in general.
Right now I am running syzmel's 20E with 1.3ghz overclock version 3.09.
Back to the problem: this is the steps I take to upgrade to any rom: 1. Download (slimbean, vanir asop) 2. flash v20D (unmodded) 3. Root it using Framaroot 4. Install CWM using L7CWM.zip (extracted, then clicked on flash bootloader, flash recovery, and then booted into recovery) 5. Boot into CWM 6. Click on factory reset and reset 7. Go into mounts and storage and format /system 8. Go to advanced and wipe dalvik cache. 9. Flash either 4.3 version slimbean or Vanir ASOP (tell me which is better) 9. Flash gapps (Slimbean: Slim AIO minimal Gapps, Vanir: 4.3 minimal Gapps which is found in the Vanir ASOP page) 10. Factory reset again 11. Wipe dalvik 12. Reboot
Now as soon as I reboot, either it stays rebooting, or boots once and when you reboot it stays at the boot loading page (slimbean logo, or android logo) (In other words, once you go black, you never go back. Not being racist, just saying once it blacks out it doesn't work no more). So i retry. And then I give up and stick on v20E.
So please suggestions?
Also ignore my signature
AsianFoodRules said:
Also ignore my signature
Click to expand...
Click to collapse
Are you sure it wipes made correctly?
Danm, yes I'm sure.
Why you dont format cache and data & data/media ?
Did you try boot without gapps... Sometimes bad gapps cause a lot of problems
Sent from my LG-E610 using Tapatalk
When you factory reset it clears cache automatically. I'll try without Gapps.
wipe data,wipe cache wipe dalvic cache
AsianFoodRules said:
When you factory reset it clears cache automatically. I'll try without Gapps.
Click to expand...
Click to collapse
How do you factory reset? Factory Reset is NOT only wipe data
raul338 said:
How do you factory reset? Factory Reset is NOT only wipe data
Click to expand...
Click to collapse
Factory reset in CWM clears cache automatically.
....Anyway, I finally fixed it. Turns out I had to wipe EVERYTHING. Including /data and /data media. Thanks anyway guys.
LG Optimus L5 E610 - CWM Bootlooping
Basically I inserted a pre-rooted firware into my lg phone using 20d+root + cwm.kdz, everything was fine including the flashing, I some how got the the CWM recovery and done everything such as wiping cache, etc, but the problem was before and after the wiping, etc, is that everytime i press power button it turn off and on and back on to the CWM recovery screen not home screen with apps, etc.
I am really fustrated, please Help!:crying:
Hi i installed custom rom to my samsung note 3 with cwm recovery it was working good.After a time later i need to format it.I opened cmw recovery and
-formatted system
-formatted cache
-formatted data
after that i installed custom rom it installed succesfully.I restarted the phone,sound and note 3 writed and it stacked at the "Samsung"writings.I waited a lot but it doesnt opened.How can i solve this problem.
I tried wipe
dalvik wipe cache
wipe cache
but not solved my problem.
I can still reach the cmw recovery 6.0.4.7.
Thanks.
try to flash this file and let me know if it works
btw wrong section to talk about problems
baba17 said:
Hi i installed custom rom to my samsung note 3 with cwm recovery it was working good.After a time later i need to format it.I opened cmw recovery and
-formatted system
-formatted cache
-formatted data
after that i installed custom rom it installed succesfully.I restarted the phone,sound and note 3 writed and it stacked at the "Samsung"writings.I waited a lot but it doesnt opened.How can i solve this problem.
I tried wipe
dalvik wipe cache
wipe cache
but not solved my problem.
I can still reach the cmw recovery 6.0.4.7.
Thanks.
Click to expand...
Click to collapse
Probably tried to flash a KK rom if you where running JB before.
Or the other way around, trying to flash a JB rom on a KK device.
Sent from my SM-N9005 using Tapatalk
Hello,
actually I'm using a SGS4 I9505 with cm-12-20150304-NIGHTLY-jfltexx and CWM 6.0.5.1.
I've tried to flash several TW Lollipop firmware wich i found in the I9505 forum:
1. Kushan+Touchwiz+Lollipop+Lite+Rom+v.1.2
2. S4_Echoev42_EchoePop2_020315
3. OA7-2.1F
4. XXUHA07-v2.01
Before flashing any oft this firmwares i made a factory reset, wiped both caches and installed the modem Firmware via Odin.
After flashing firmware # 1 and 2 my phone was stuc in a bootloop (only Samsung Galaxy S4 Logo appears).
Flashing firmware #3 and 4 fails and cwm reports error 7.
Flashing cm12 afterwards isn't a problem and runs fine.
I think the wipe fails or doesn't work properly. Is it enougth to select factory reset in cwm and wipe the dalvik cache manualy?
What can I do?
With besteht regard
Mirko (NemesisMF)
What if it is a recovery problem?
Thought about that too.
Should i try twrp or philz?
I switched to Philz Recovery and flashed S4 Echoe Rom v42 without any Problems.
CWM seems to have a problem to falsh TW Lollipop images ower an existing CM12 an the I9505.
You need to do full wipe not just cache.
ranger4740 said:
You need to do full wipe not just cache.
Click to expand...
Click to collapse
As I wrote above I did a factory reset before flashing and wiped the caches with cwm. If that is not enougth it would be nice to explain what else I have to wipe or post a link.
While using philz recovery the factory reset for clean system is enougth and the new System is working fine.
Factory wipe is not full wipe, you need to do a full wipe as in format to install new rom, phillz recovery has this feature can't remember exactly where, I think its under advanced.
Just have a look in the sub menus.
Just to explain it better when you do a full wipe it deletes every part of the existing
Rom including the system, data and cache and some other stuff completely removing the android operating system, so unless the rom you install does a wipe before install parts of the existing system will remain and can cause boot issues. For example as you've already discovered you are trying to install a tw rom over an existing cyanogenmod 12 installation which Will cause it to hang on boot.
NemesisMF said:
As I wrote above I did a factory reset before flashing and wiped the caches with cwm. If that is not enougth it would be nice to explain what else I have to wipe or post a link.
While using philz recovery the factory reset for clean system is enougth and the new System is working fine.
Click to expand...
Click to collapse
Do you mean a factory reset from within Android itself? If so, then that's a complete obsolete step. When before flashing a rom you should perform a factory reset, then they always mean a full wipe from the recovery. You need to do a full wipe from the recovery. That means the /system partition is being wiped. You will see it in the screen during the wipe if it wipes /system.
But it also could have been a problem of CWM. I don't think it is being updated anymore, so better use TWRP or Philz.