Every time I take a picture, it says "processing" for a second or two.
Is this normal?
Sent from my SM-N9005 using xda app-developers app
you have to turn flash auto or on and check your mode is automatic.
when you open the app you see right corner some settings. you can adjust there.
i had the same problem and solved like this. hope helps you too.
Anyone aware how to shut the shutter sound while clicking a picture ?
Sent from my SM-N900 using XDA Premium 4 mobile app
gupta_arth said:
Anyone aware how to shut the shutter sound while clicking a picture ?
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Put it in silent
---------- Post added at 07:27 AM ---------- Previous post was at 07:26 AM ----------
fethi2 said:
you have to turn flash auto or on and check your mode is automatic.
when you open the app you see right corner some settings. you can adjust there.
i had the same problem and solved like this. hope helps you too.
Click to expand...
Click to collapse
I couldn't understand what you said..could you please repeat? and how to use flash while taking a photo?
danieljamie said:
Every time I take a picture, it says "processing" for a second or two.
Is this normal?
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
I had the same issue when I played with a display unit at an AT&T store.
Team Union ROM LT4 v7, LT3 Modem, Speedmod k5-5, Carrier: AT&T (US)
I do not have mine yet, but I did read elsewhere that you need to shut off the 'low light' and / or 'image stabilisation' (may be the same thing?) settings to speed it up. I have seen demos where the photo is almost instant, and you can take photos almost as fast as you can tap the screen.
gupta_arth said:
Anyone aware how to shut the shutter sound while clicking a picture ?
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have the same problem. the shutter sound is here, even in vibrate or silent modus.
Thx for your help
In automatic mode with flash auto, the GN3 tries to take the best picture.
In low light environement, flash is not used and GN3 takes time to take the best shot hence the lag.
In bright daylight, with the same configuration, there's no lag.
1. On my rooted N900 there is no shutter sound when sound is set to "Mute".
2. I can confirm that the camera "processing" delay disappears with "smart stabilization" disabled.
Sent from my SM-N900 using Tapatalk 4
StylishMafia said:
Put it in silent
---------- Post added at 07:27 AM ---------- Previous post was at 07:26 AM ----------
I couldn't understand what you said..could you please repeat? and how to use flash while taking a photo?
Click to expand...
Click to collapse
when you launch the app, push menu button > settings > window opens
Click on the settings icon on the right tab > scroll down you will see flash setting.
Switch to auto or On.
Enjoy.
fethi2 said:
when you launch the app, push menu button > settings > window opens
Click on the settings icon on the right tab > scroll down you will see flash setting.
Switch to auto or On.
Enjoy.
Click to expand...
Click to collapse
I tried all of these and nothing alieved the delayed "processing" after taking a shot. It also would not allow me to take burst shots. I finally tried turning off smart stabilization and that fixed the lag problem. I was able to take burst shots as well after I disabled it
You need to disable image stabilization. It comes turned on by default.
Sent from my SM-N9005 using xda app-developers app
You are probably shooting in HDR mode instead of auto mode.
HDR needs processing
Related
Everytime i take a screenshot it launches the gallery and goes to edit mode for the screenshot. Does anyone know to change that so i can take a screenshot and it doesn't launch anything just stay in the drop down.
Metamorph22 said:
Everytime i take a screenshot it launches the gallery and goes to edit mode for the screenshot. Does anyone know to change that so i can take a screenshot and it doesn't launch anything just stay in the drop down.
Click to expand...
Click to collapse
I'm pretty sure you've set it that way somehow, which means there should be an option to turn it back off. By default, mine snaps, says saving screenshot at the top, and copies it to the clipboard. Gallery never opens.
Found it under display options.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
On my note 2 if I wanted to capture a screen shot I simply wiped my hand from left to right
On the s4 this doesn't seem to work How do I do a screen capture can anyone help please
Thanks
Sent from my GT-I9505 using xda premium
Long press power button see if there's a screenshot button... Or hold home with volume down button.
Sent from my LT18i using xda premium
mancuk29 said:
On my note 2 if I wanted to capture a screen shot I simply wiped my hand from left to right
On the s4 this doesn't seem to work How do I do a screen capture can anyone help please
Thanks
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
Method 1:
1. Place the palm of your hand on the screen of S4. Make sure the phone is unlocked, because it won’t work on the locked screen.
2. Swipe your hand across the screen in either direction, left or right. You should hear a camera shutter sound along with a notification appearing on screen saying “copied to clipboard”. You can find the screenshot in your photo Gallery.
(make sure the “Palm motion” option is turned on. To on/off this option, go to Settings -> Motions and gestures -> Palm motion)
Method 2:
simply press lock key and home button at the same time. Hold both the buttons at same time till you hear the camera shutter sound.
Omessy7 said:
Long press power button see if there's a screenshot button... Or hold home with volume down button.
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
Does not work! Do not give advice if you did not try it yourself!
---------- Post added at 04:22 PM ---------- Previous post was at 04:18 PM ----------
samersh72 said:
Method 1:
1. Place the palm of your hand on the screen of S4. Make sure the phone is unlocked, because it won’t work on the locked screen.
2. Swipe your hand across the screen in either direction, left or right. You should hear a camera shutter sound along with a notification appearing on screen saying “copied to clipboard”. You can find the screenshot in your photo Gallery.
(make sure the “Palm motion” option is turned on. To on/off this option, go to Settings -> Motions and gestures -> Palm motion)
Method 2:
simply press lock key and home button at the same time. Hold both the buttons at same time till you hear the camera shutter sound.
Click to expand...
Click to collapse
Method 1 does not work for me. Only Home+Power button combination. Palm motion turned on. I got i9505.
MikeMaMan said:
Does not work! Do not give advice if you did not try it yourself!
---------- Post added at 04:22 PM ---------- Previous post was at 04:18 PM ----------
Method 1 does not work for me. Only Home+Power button combination. Palm motion turned on. I got i9505.
Click to expand...
Click to collapse
Didn't I say home + volume dont u read well? Seal
Sent from my LT18i using xda premium
MikeMaMan said:
Does not work! Do not give advice if you did not try it yourself!
---------- Post added at 04:22 PM ---------- Previous post was at 04:18 PM ----------
Method 1 does not work for me. Only Home+Power button combination. Palm motion turned on. I got i9505.
Click to expand...
Click to collapse
first method is the same for both version try again.
here is the tutorial http://www.jayceooi.com/2013/04/26/samsung-galaxy-s4-gt-i9500-gt-i9505-user-manual-guide/
thanks people .. I find the swipe across very hit and miss but the home and power is perfect
sorry for delay thanking you .. have been out .... wasn't being rude
Ok. I tried this Sweeping method from the manual (page 26) and it DOES NOT work for me!!! Can anybody try it? The only thing what work is Home+Power buttons combination. (i9505 AMDC)
If you r too lazy to press those get screenshot it... Wave your phone*ketchik*... Or enable motion option, palm thingy
Sent from za OctaCores SIV
go motion setting there turn on the palm swipe
MikeMaMan said:
Ok. I tried this Sweeping method from the manual (page 26) and it DOES NOT work for me!!! Can anybody try it? The only thing what work is Home+Power buttons combination. (i9505 AMDC)
Click to expand...
Click to collapse
Touch the screen when swiping your hand
Sent from my Galaxy using xda premium
enable palm swipe and swipe across the screen with your hands in contact with screen
Palm swipe works, it's just not as sensitive as it was compared to the S3/Note 2. You need to apply a bit more pressure.
MsElise said:
go motion setting there turn on the palm swipe
Click to expand...
Click to collapse
It's ON. I think it was on by default.
Omessy7 said:
If you r too lazy to press those get screenshot it... Wave your phone*ketchik*... Or enable motion option, palm thingy
Sent from za OctaCores SIV
Click to expand...
Click to collapse
We are not lazy And two button combination was always all right for me.
---------- Post added at 11:19 AM ---------- Previous post was at 11:15 AM ----------
bala_gamer said:
enable palm swipe and swipe across the screen with your hands in contact with screen
Click to expand...
Click to collapse
This is what they had to mention in the manual ... Swipe screenshot work if i touch the screen. Thx for the clarification.
In the pool party commercial for the S4, they show a girl checking her text message on her lock screen by hovering her finger over the "New Message" box on the lock screen.
Here is a link. It happens around 1 minute:
http://www.youtube.com/watch?v=Q2TtdM4iI5k
Maybe it's not a lock screen but a widget of some sort? It looks like either a lock screen or home screen.
True. Can't tell but it's either home screen or Lockscreen. Both where previews don't work with air view?
j510 said:
True. Can't tell but it's either home screen or Lockscreen. Both where previews don't work with air view?
Click to expand...
Click to collapse
I wasn't able to get it to work on the lock screen. The box shows up looking just like the commercial but hovering my hand doesn't do anything. I'm wondering if this is a feature not in the AT&T version... I tried doing it as a widget on the home screen but it also didn't work with air view.
OnSugarHill said:
I wasn't able to get it to work on the lock screen. The box shows up looking just like the commercial but hovering my hand doesn't do anything. I'm wondering if this is a feature not in the AT&T version... I tried doing it as a widget on the home screen but it also didn't work with air view.
Click to expand...
Click to collapse
Turn on message preview under messaging settings
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
---------- Post added at 08:09 AM ---------- Previous post was at 08:08 AM ----------
Also make sure information preview is checked under settings my device air gestures
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
That definitely looks like the lock screen with a small clock. But it sure as heck doesn't work like that for me.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
You have to click to the left of the on off toggle for air view in the settings.. It will bring up a menu and make sure information preview is selected.. Also if the whole message can be seen in the message preview on the lock screen it won't air view... It has to be more than the preview can show
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
rcklss1 said:
You have to click to the left of the on off toggle for air view in the settings.. It will bring up a menu and make sure information preview is selected.. Also if the whole message can be seen in the message preview on the lock screen it won't air view... It has to be more than the preview can show
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
So have you gotten it to work? In my lock screen, the box says "New Message" but doesn't show ANY of the text. Do I need to make a new widget on my lock screen or something? Air view isn't working over the standard "New Message" box that shows up on the lock screen by default. If you could take a pic of where the air view is working for you on the lock screen, that would be great.
Yeah after figuring it out I've been using it a few days now... If its not showing any part of the message open the messaging app.. Then settings and make sure message preview is checked
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
---------- Post added at 04:11 PM ---------- Previous post was at 03:56 PM ----------
I'm going to reiterate the steps since I think I wasn't clear enough in the first post I made here..
To enable airview and get the messaging preview from it like the pool party commercial is a two step process Samsung did not enable the information preview from the factory so you must do this yourself..
Step one: goto your phones settings then my device and scroll down to airview.. Make sure the button next to the word airview is green THEN tap the word airview and it will open a sub menu with 5 settings in it.. Make sure information preview is turned on and green
Step 2: open the messaging app and hit the menu button to access settings..scroll down to notification settings and make sure message preview is checked off with the green check mark (again Samsung did not enable this by default so you must check it yourself)
To test text yourself or have someone text you with a few sentences and hover your finger over the notification on the lock screen it will bring up the bubble like in the commercial.
If the entire message can be seen in the preview on the lock screen (ex: hey) then airview will not doing anything here.. Its only for messages larger than the preview can display..
If your notification on the lock screen only shows 1 new message you do not have message preview enabled under the messaging app..
Airview and information preview will allow you to hover over your calendar (app not widget), and in the email app (not gmail) as well.
Also yes I am on an AT&T S4
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
rcklss1 said:
Yeah after figuring it out I've been using it a few days now... If its not showing any part of the message open the messaging app.. Then settings and make sure message preview is checked
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
---------- Post added at 04:11 PM ---------- Previous post was at 03:56 PM ----------
I'm going to reiterate the steps since I think I wasn't clear enough in the first post I made here..
To enable airview and get the messaging preview from it like the pool party commercial is a two step process Samsung did not enable the information preview from the factory so you must do this yourself..
Step one: goto your phones settings then my device and scroll down to airview.. Make sure the button next to the word airview is green THEN tap the word airview and it will open a sub menu with 5 settings in it.. Make sure information preview is turned on and green
Step 2: open the messaging app and hit the menu button to access settings..scroll down to notification settings and make sure message preview is checked off with the green check mark (again Samsung did not enable this by default so you must check it yourself)
To test text yourself or have someone text you with a few sentences and hover your finger over the notification on the lock screen it will bring up the bubble like in the commercial.
If the entire message can be seen in the preview on the lock screen (ex: hey) then airview will not doing anything here.. Its only for messages larger than the preview can display..
If your notification on the lock screen only shows 1 new message you do not have message preview enabled under the messaging app..
Airview and information preview will allow you to hover over your calendar (app not widget), and in the email app (not gmail) as well.
Also yes I am on an AT&T S4
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Excellent. I will try this
Thanks for the help. I got it working!
No problem
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Worked thank you!
No prob
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
rcklss1 said:
Yeah after figuring it out I've been using it a few days now... If its not showing any part of the message open the messaging app.. Then settings and make sure message preview is checked
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
---------- Post added at 04:11 PM ---------- Previous post was at 03:56 PM ----------
I'm going to reiterate the steps since I think I wasn't clear enough in the first post I made here..
To enable airview and get the messaging preview from it like the pool party commercial is a two step process Samsung did not enable the information preview from the factory so you must do this yourself..
Step one: goto your phones settings then my device and scroll down to airview.. Make sure the button next to the word airview is green THEN tap the word airview and it will open a sub menu with 5 settings in it.. Make sure information preview is turned on and green
Step 2: open the messaging app and hit the menu button to access settings..scroll down to notification settings and make sure message preview is checked off with the green check mark (again Samsung did not enable this by default so you must check it yourself)
To test text yourself or have someone text you with a few sentences and hover your finger over the notification on the lock screen it will bring up the bubble like in the commercial.
If the entire message can be seen in the preview on the lock screen (ex: hey) then airview will not doing anything here.. Its only for messages larger than the preview can display..
If your notification on the lock screen only shows 1 new message you do not have message preview enabled under the messaging app..
Airview and information preview will allow you to hover over your calendar (app not widget), and in the email app (not gmail) as well.
Also yes I am on an AT&T S4
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Finally got it to work.
Sent from my SAMSUNG-SGH-I337 using xda premium
Great glad I could help
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
rcklss1 said:
Great glad I could help
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I can't seem to get air view to work with my text message threads. I open the stock text message app once it opens to all of the text conversation threads I hover over any of them and nothing. I have air view turned on and I also have preview enabled in the text settings. Help will be much appreciated.
Sent from my Nexus 7 using Tapatalk HD
lordandroid said:
I can't seem to get air view to work with my text message threads. I open the stock text message app once it opens to all of the text conversation threads I hover over any of them and nothing. I have air view turned on and I also have preview enabled in the text settings. Help will be much appreciated.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
In the thread can you see the link hole message in them or are they more than one line
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
rcklss1 said:
In the thread can you see the link hole message in them or are they more than one line
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I dont see a link hole when I hover over it. I'm guessing that based on what your saying if the text reply isnt long enough airveiw will not work? The threads i have in text are short replies 2-5 worded responses. Am I guessing correct?
lordandroid said:
I dont see a link hole when I hover over it. I'm guessing that based on what your saying if the text reply isnt long enough airveiw will not work? The threads i have in text are short replies 2-5 worded responses. Am I guessing correct?
Click to expand...
Click to collapse
Damn auto correct I meant the whole message lol sorry about that.. Yeah if its short enough that you can see the entire message in the thread list then airview won't do anything.. If you have a long message it will show up when you hover over it
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
rcklss1 said:
Damn auto correct I meant the whole message lol sorry about that.. Yeah if its short enough that you can see the entire message in the thread list then airview won't do anything.. If you have a long message it will show up when you hover over it
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Ok thank you. Airveiw worked with the gallery and proprietary email just not my text threads this explains it
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
I cannot find the setting to allow gps tagging on my pictures. Does any know where it is?
Sent from my SM-G900V using Tapatalk
chkn said:
I cannot find the setting to allow gps tagging on my pictures. Does any know where it is?
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
In Camera select settings. Scroll Down and select Location Tags to turn it on.
hebertm6395 said:
In Camera select settings. Scroll Down and select Location Tags to turn it on.
Click to expand...
Click to collapse
Thanks for the quick response, but have you tried your suggestion? It's not there on my phone.
blulite;5188and go to the bottm9 said:
Thanks for the quick response, but have you tried your suggestion? It's not there on my phone.
Click to expand...
Click to collapse
I did however install some of the free camera mode features, maybe it got installed with one of them. If you select mode and go to the bottom there is an option to download. I picked a few of the and they installed, then that's when I noticed the location feature. Try that.
Tried that. All 4 modes. Still no go. What mode did you see the option in?
Sent from my SM-G900V using Tapatalk
Camera settings is actually bigger than what is shown use your finger to scroll it up and you'll see more options
Sent from my SM-G900V using Tapatalk
Ah. That worked. The options don't fill the screen, so never thought to scroll. Duh.
Sent from my SM-G900V using Tapatalk
So when trying to take a picture, sometimes it will do it instantly, other time it a blue ring with sort of ring around and say "keep your phone still" and takes like 6 seconds for a picture? It's on auto mode. Anyone know why this does this and when?
Sent from my SM-G900V using XDA Free mobile app
Talking about a user facing camera instead of the outward facing camera @Dennisg34 ?
kprice8 said:
Talking about a user facing camera instead of the outward facing camera @Dennisg34 ?
Click to expand...
Click to collapse
No sorry, the outer camera, 16mp one
Sent from my SM-G900V using XDA Free mobile app
Normal lighting?
Dennisg34 said:
So when trying to take a picture, sometimes it will do it instantly, other time it a blue ring with sort of ring around and say "keep your phone still" and takes like 6 seconds for a picture? It's on auto mode. Anyone know why this does this and when?
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
I noticed it also, I saw that it happens when a "twilight shot" icon shows up in the bottom, so my untested theory is that the auto mode is engaging some sort of night mode where it keeps the shutter open longer to capture darker images. If you turn off picture stabilization, then the delay goes away.
Rlin5741 said:
I noticed it also, I saw that it happens when a "twilight shot" icon shows up in the bottom, so my untested theory is that the auto mode is engaging some sort of night mode where it keeps the shutter open longer to capture darker images. If you turn off picture stabilization, then the delay goes away.
Click to expand...
Click to collapse
Ahh I was thinking it was the stabilization option, thanks!
Sent from my SM-G900V using XDA Free mobile app
Mine does this too, and I am not sure why. It seems to happen when the object I am trying to capture is moving, (5 year old daughter)
Lodaserves said:
Yeah like this If you turn off picture stabilization, then the delay goes away.
Click to expand...
Click to collapse
exactly. go into the settings when you open up the camera app, turn off picture stabilization. will work normal from there on.