Database Users

Need help.. Bootloader Err:A5,70,70,00,1F

I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??

anducly said:
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
Click to expand...
Click to collapse
What phone D2 or D2 G and which SBF did you use?
I assume you used the 2.2.00 sbf when you needed the 2.3.20 SBF once you have the 2.3.20 update the bootloader is changed and won't accept the 2.2.0 sbf.
IF that's the case you need to try flashing it with the 2.3.20 SBF found HERE
Read the bottom of THIS post if you get a bootloop or stuck at the M logo screen.

it works!! Thank you so much!!

anducly said:
it works!! Thank you so much!!
Click to expand...
Click to collapse
Glad it worked but what specifically worked? I gave a bunch of information, I just want to know which pieces helped in your case.

THANK YOU SOOOOOOOOO MUCH!!!!! I know that this post is a little old but I thought that my phone was finished. Again Thank You!

Thank you sooooooo much!!!! I thought all hope was lost.

Had this problem the other night but all is good now
Sent from my Motorola Droid 2 with Fission 2.3.1

This worked to fix my phone, thx so much
i used the 2.3.20 SBF

will this work on the droid x?

myrakle said:
will this work on the droid x?
Click to expand...
Click to collapse
You probably flashed the wrong SBF. You need to find the latest DX SBF they should be found in the DX section of XDA. Off the top of my head I can't think of the latest release.
Sent from my DROID2 using XDA App

anducly said:
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
Click to expand...
Click to collapse
I have a similar problem. I just got this phone and dont know the history other than the ESN is clear with vzw. It goes str8 to the BL screen and has this...
Bootloader
D2.35
Battery OK
OK to program
Tranfer Mode: USB
I Dloaded RSD lite 4.7 an the 2.35 BL sbf as well as the orig 2.2 and 2.3 FW sbf's. RSD will communicate with the phone. I can reload the BL sbf if I open the sbf file but none of the FW sbf will load in RSD, the start button command stays grayed out. Also in RSD on line 1 of the phone status it shows connected but above that in the device properties box info for the meid/esn etc show N/A.
I can access the recovery menu and at the bottom there is an error report for accessing recovery cache in a folder path.
Can I put an update.zip on an sd card and try to revive this thing that way or maybe I am doing something wrong? I am guessing this is the result of some botched flash job.
I have done some modding on my Droid X such as backing it up, deodexing and put the Liberty ROM on it as well and changing ROMS on my android tablet so I have some of the basics down but after much searching & reading I am seeking help with this one. Thanks in advance!
Edit: Now my battery is dead, I have found in other threads that a blank software device wont charge the battery if this helps

Ronbo85 said:
I have a similar problem. I just got this phone and dont know the history other than the ESN is clear with vzw.
I Dloaded RSD lite 4.7 an the 2.35 BL sbf as well as the orig 2.2 and 2.3 FW sbf's. RSD will communicate with the phone. I can reload the BL sbf if I open the sbf file but none of the FW sbf will load in RSD.
Click to expand...
Click to collapse
Maybe try flashing in linux and make sure you have read up about flashing SBF's on a DX. I don't know which one to flash as this is the D2 section and I have a D2.
I can access the recovery menu and at the bottom there is an error report for accessing recovery cache in a folder path.
Click to expand...
Click to collapse
This error is normal disregard it.
Can I put an update.zip on an sd card and try to revive this thing that way or maybe I am doing something wrong? I am guessing this is the result of some botched flash job.
Click to expand...
Click to collapse
That would work if you can find an update.zip made by moto that will go through the bootloader. And it doesn't really matter how it got here but probably it is a bad flash or a wrong ROM. (You might try connecting it via wall charger (not USB) while it's powered down then turn it on and see if you can get into clockwork recovery.)
Edit: Now my battery is dead, I have found in other threads that a blank software device wont charge the battery if this helps
Click to expand...
Click to collapse
You need to find someone with a DX to swap/charge your battery with so you can get in and flash it or you need an external battery charger (one that will charge the battery outside of the phone).
Sent from my DROID2 using XDA App

Hi, thank you for the reply. I know I made comments about my DX I have as well but to be clear this is a Droid 2 I am working on. I will get the battery charged somehow and let you know what I come up with, thanks again

Ronbo85 said:
Hi, thank you for the reply. I know I made comments about my DX I have as well but to be clear this is a Droid 2 I am working on.
Click to expand...
Click to collapse
Oh. In that case you need the 2.3.20 SBF found here http://droid2files.com/tools/VRZ_A955_2.3.20_1FF_01.sbf after you can get the phone charged. (If it helps the D2 has the same size battery as the D1 so you can swap/charge a D2 battery with a D2 or a D1.)
Also try finding RSDLite 4.8 or 4.9 as they might work better for you. I'd give you a link but I Haven't flashed an SBF with RSDlite I just use linux.
Sent from my DROID2 using XDA App

Cool thank you again. I got the battery charging via a rig I have done before with other devices from a camera charger. My linux(zorin) machine lost keyboard function out of the clear blue I havent had a chance to sort it yet(another project lol) but I do have a live usb thumb drive setup to use for linux. I'll try on this windows machine for now.
I'll keep you posted as to the results

well I got the battery charged up. I still have this problem when I select either the 2.2 or 2.3 sbf files the start button for applying the flash stays grayed out as if the files are invalid. If I select a bootloader sbf the start button is ok and I can load the BL sbf. I tried switching to rsd 4.8 too. I will keep playing around with it and maybe try to get my linux pc going.

Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away

Ronbo85 said:
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Click to expand...
Click to collapse
Are you still using rsdlite 4.7? I had problems with it not too long ago. Downloaded 4.8 and worked like a charm. Hope you get it sorted out.
Sent from my ultra fast Liberated Droid 2

Ronbo85 said:
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Click to expand...
Click to collapse
You might need to put the file in the C: drive of your windows box. At least that's what a another forum post found from a Google search suggested.
Or try linux Check here for more info: http://forum.xda-developers.com/showthread.php?t=804088. It's an old version of Ubuntu and there are somethings I want to add to it, I'll be updating it as soon as I have some free time to put it together using the 10.10 version.

I found this link... http://androidforums.com/droid-all-...-failed-flashing-process-0x7100-rsd-lite.html check out post #32
It does make a difference where the file is located yes and I got the sbf to perform the flash but after a lengthy process looks like about 3 steps and it takes 3-5 min I end up with a fail messege. There is more info I could provide but its been a long Monday I need to give it a break and now the batt is low again.
Thank you all again for your much appreciated help. I will regroup tomorrow. I will try to log in on my phone to see any ideas I mite need to think over.

[Q] RSD Lite not recognizing Droid X

I am stuck on the BootLoader screen after installing the 2.3.340 update.zip.
I'm trying to flash the 2.3.320 sbf file using RSD Lite but it isn't recognizing my phone. I reinstalled the drivers and restarted my machine.
RSD Lite shows a device connect to USB Port 1
But it says :
Model - S Flash OMAP3630 MI
IMEI/ESN/MEID - N/A
When I try to flash the sbf file I get a Status of 'Failed Flashing Process, Unable to retrieve initialization values from INI file (0x7029); phone connected

What version of RSD?

mob87 said:
What version of RSD?
Click to expand...
Click to collapse
Version 4.6

You need 4.8 or above

mob87 said:
You need 4.8 or above
Click to expand...
Click to collapse
Downloaded version 4.9. Will test it out and let you know.

tgadd said:
Downloaded version 4.9. Will test it out and let you know.
Click to expand...
Click to collapse
Still not working. Going to go to Verizon and sweeten up with a rep. Thanks for the help.

Do you have the Droid X drivers installed? Did you run as administrator?

mob87 said:
Do you have the Droid X drivers installed? Did you run as administrator?
Click to expand...
Click to collapse
Yes and yes.
My battery ran out last night so I'm having a co-worker charge it up for me. I'm going to try one last time when I get off work today and then head over to Verizon.

im having a simiar issue but rsd lite 4.8 wont even recognize my device and i sweaer ive got the drivers but im unable to find them or a guide to make sure i even installed them correctly, could i get pointed to where they are please

Download the driver from here, not the charging one but the other one, unzip and install.
http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD

mob87 said:
Download the driver from here, not the charging one but the other one, unzip and install.
http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD
Click to expand...
Click to collapse
That is what I've installed and still no luck.

I think it's working. All looks to be in good order. Flashing at the moment

tgadd said:
I think it's working. All looks to be in good order. Flashing at the moment
Click to expand...
Click to collapse
I found out that error 0x7029 usually related that the .sbf file is not in the C:\ root folder. So I moved it there.
Then I couldn't hit "start" after selecting the .sbf file because "start" was greyed out. I found a post here explaining how to fix it.
Follow his steps completely and it'll solve this problem.

Give RSD a little time to see your phone too. The first time I ran it, I had to wait about a minute until it populated, now it comes right up. I had a terrible time getting it to work though... Just keep tryin'!

[Q] Can't delete anything on my internal memory!

Hello! I'm a proud owner of a Milestone 2 (I don't know if this goes to Droid 2 or Droid 2 Global ) and I have a quite big problem:
My phone was running very bad, a lot of FC and slowness so I decided to wipe, so I did, went to recovery, wipe data, wipe cache, all done perfectly.
Reset the phone and what happened? Everything was exactly the same as before, I tried to deleted applications and when I restart the phone they appear all again and random resets.
I went mad and installed a .SBF with RSDLite, it completed and failed at checksum group errors and bricks my phone to "CRITICAL ERROR: DE A1" screen.
I revived my phone by installing the .SBF through booteable Ubuntu, but it's ALL the SAME as before.
I would love all the help you could give me and sorry for my bad english.
Greetings.
EDIT: I'm really sorry! I didn't know there was a Milestone 2 section.

did you get it fixed?
if not, which sbf did you use?

sd_shadow said:
did you get it fixed?
if not, which sbf did you use?
Click to expand...
Click to collapse
Nope yet. I used the SBF Flashing in Linux with Ubuntu Live CD with the Brazil GingerBread sbf for Milestone 2 (also tried UK)
If I try to flash with RSD Lite won't pass the CHECKSUM ERRORs and bricks my phone to CRITICAL DEA1, with Ubuntu won't pass checksums without errors but it boots.
Thanks for the reply.

what does bootloader say

sd_shadow said:
what does bootloader say
Click to expand...
Click to collapse
CODE CORRUPT if I'm not mistaken.

which bootloader do you have?

sd_shadow said:
which bootloader do you have?
Click to expand...
Click to collapse
Bootloader 70.12
Thank you for the reply.

are you verifying md5 checksums?
getting sbfs from
http://sbf.droid-developers.org/umts_milestone2/list.php

sd_shadow said:
are you verifying [...] md5 checksums? [/URL]
getting sbfs from [...]
Click to expand...
Click to collapse
I did the check method and none of the codes matched, which SBF should I download now?
Thanks for the reply!

doesn't matter if the checksums don't match, the file is not getting downloaded correct
pick one and keep trying
or try a different pc or internet source

sd_shadow said:
doesn't matter if the checksums don't match, the file is not getting downloaded correct
pick one and keep trying
or try a different pc or internet source
Click to expand...
Click to collapse
The checksums matched (I was checking the .sbf decompressed when I should checking the compressed one), but nothing, tried 2-3 sbfs (slow internet, downloading them takes forever) and the same as before, if done through RSDLite Bootloader with Code Corrupt and if done through Ubuntu all is same as before.
Thank you for the fast reply.

have installed Moto Drivers 5.4.0 or better
RSD Lite 5.7
moto usb data cable,
different 2.0 usb port sometimes back usb ports work better than front
different pc

sd_shadow said:
have installed Moto Drivers 5.4.0 or better
RSD Lite 5.7
moto usb data cable,
different 2.0 usb port sometimes back usb ports work better than front
different pc
Click to expand...
Click to collapse
I was using RSD Lite 6.1, should I downgrade?

should be fine, but I haven't used higher than 5.7
but when it's not working, try something different

sd_shadow said:
should be fine, but I haven't used higher than 5.7
but when it's not working, try something different
Click to expand...
Click to collapse
Nope, done with back USBs, a few SBFs, RSD Lite 5.7 and nope, Critical Error DEA1.
Hopefully, still can flash through Ubuntu and revive it.
I don't really know what else I can try, thanks a lot for the replies tho!
Merry Christmas.

[Q] Fastboot Reason: Flash Failure

I'm in over my head and hoping the kindness of a stranger can bail me out! It all started when I attempted to root my wife's Razr M from Verizon. I used a utility (the DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip) to attempt an update and then a root. Well the update failed and now I see this when the phone starts up.
AP Fastboot Flash Mode (S)
Device is LOCKED. Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected
So I figured out that I can get to BP Tools and this somehow bypasses the problem and boots the phone normally. So as long as my wife doesn't turn the phone off, she'll be fine but I cannot leave it this way. I am open to suggestions and at your mercy. Thanks in advance!
-Chad

So did you ever root?
Sent from my Galaxy Nexus using xda premium

skippid said:
So did you ever root?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
No. I'd like to eventually but right now, I need to make that fastboot lock screen go away. Please treat me like a noob if it's not already apparent.
Thanks

What caused the update to fail? Also, you're lucky btw - Normally a failed update == a brick.
If you didn't root, you can probably take it to Verizon. If you were flashing the OTA and it went bad, that shouldn't be a problem at all...

sloosecannon said:
What caused the update to fail? Also, you're lucky btw - Normally a failed update == a brick.
If you didn't root, you can probably take it to Verizon. If you were flashing the OTA and it went bad, that shouldn't be a problem at all...
Click to expand...
Click to collapse
I followed this video on youtube: youtube.com/watch?v=oDzMQykQ2fA How to Upgrade To And Root Jelly Bean on Droid Razr!
I watched the script run and it kept saying "fail" on several line items and I knew I was in trouble. Unfortunately this was self-induced and I have no desire to go to Verizon for help. I'm not that much of a noob. Anyhow, I'd just like to get back to square one and start over. What I did to get to BP Tools is to hold down volume up, volume down, and power button. Screen shuts off..let those buttons up and press them again which brings me to a second menu. From there I can choose recovery, fastboot, BP Tools, factory reset. The only one that helped was BP Tools which basically sent the phone to a regular boot and it acts normal. If I choose recovery, I get the android dude on his back with a explanantion or question mark, don't recall. If I press volume down, volume up and then release volume up, I can get to the menus where it allows you to run install from disk or something like that. I can't get to the point where I can see my phone on the computer so that I could place a flash file on the phone and re-flash it or something. If any of this sounds remotely familiar to anyone out there, please feel free to add your 2 cents. Thanks!

Try to wipe all user data after you get to the screen where you can install zips in recovery. See if that works. Pm me if you get stuck and we can possibly fix it through adb
Sent from my Galaxy Nexus using xda premium

skippid said:
Try to wipe all user data after you get to the screen where you can install zips in recovery. See if that works. Pm me if you get stuck and we can possibly fix it through adb
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I did try that..sorry should have mentioned it. No dice. Same screen and I got the pleasure of setting the wife's phone up again.
I'm open to suggestions. adb?

ce_lloyd said:
I'm in over my head and hoping the kindness of a stranger can bail me out! It all started when I attempted to root my wife's Razr M from Verizon. I used a utility (the DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip) to attempt an update and then a root. Well the update failed and now I see this when the phone starts up.
Click to expand...
Click to collapse
I see your problem...
DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip
The M is an XT907...
Use this one: http://forum.xda-developers.com/showthread.php?t=2207419 and do a fastboot restore...

Thank you sloosecannon. Had some logging in troubles so I appreciate it!

TMYINC said:
Thank you sloosecannon. Had some logging in troubles so I appreciate it!
Click to expand...
Click to collapse
No problem

sloosecannon said:
I see your problem...
DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip
The M is an XT907...
Use this one: http://forum.xda-developers.com/showthread.php?t=2207419 and do a fastboot restore...
Click to expand...
Click to collapse
This looks really straightforward. I think I can handle it. Are you certain it will work? Just plug in the phone and run the bat file? Right now the phone works so I guess will give it a shot and hopefully I'm on my way. Thanks everyone for the assist.

ce_lloyd said:
This looks really straightforward. I think I can handle it. Are you certain it will work? Just plug in the phone and run the bat file? Right now the phone works so I guess will give it a shot and hopefully I'm on my way. Thanks everyone for the assist.
Click to expand...
Click to collapse
Okay, this worked flawlessly. Thanks so much for the help. Truly amazing pointing this dunce in the right direction! Gnite.

Hi all!
I've XT926/Razr HD (Which I've rooted with towelroot)
First I tried to root it with the help of geohot (for razr M), but my phone stuck on the reboot, what I saw on the screen was:
AP Fasboot Flash Mode (S)
10.9B(*) (sha-61146a2, 2014-05-02 03:15:48)
eMC Info: Size 16GB
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
Fasboot reason: Flash Falure
Whenever I reboot my phone I see this screen, what I want is just to get rid of this issue.
My system version is 183
If anyone can help me to fix this issue I will be very thankfull.
Thanks in advance!
---------- Post added at 01:11 AM ---------- Previous post was at 01:04 AM ----------
One thing more which I forgot to mention that my phone is running on KitKat 4.4.2

aichauhan said:
Hi all!
I've XT926/Razr HD (Which I've rooted with towelroot)
First I tried to root it with the help of geohot (for razr M), but my phone stuck on the reboot, what I saw on the screen was:
AP Fasboot Flash Mode (S)
10.9B(*) (sha-61146a2, 2014-05-02 03:15:48)
eMC Info: Size 16GB
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
Fasboot reason: Flash Falure
Whenever I reboot my phone I see this screen, what I want is just to get rid of this issue.
My system version is 183
If anyone can help me to fix this issue I will be very thankfull.
Thanks in advance!
---------- Post added at 01:11 AM ---------- Previous post was at 01:04 AM ----------
One thing more which I forgot to mention that my phone is running on KitKat 4.4.2
Click to expand...
Click to collapse
You need to flash the stock firmware using RSD or House of Moto. This should be posted over at the HD forums, but the process is essentially the same for any Moto device. There's tons of threads about it. Download the software, download the firmware, connect the phone and flash.
Sent from my Blissful RAZR M 5.0.2 from Tapatalk

Flash Failure xt907 droid razr m verizon 4.4.2
Hello there!
i have the same proble with my xt907 droid razr m verizon 4.4.2.
Did you fix this problem?
can you help mw to fix it,i dont know how
thank you so much!!
ce_lloyd said:
I'm in over my head and hoping the kindness of a stranger can bail me out! It all started when I attempted to root my wife's Razr M from Verizon. I used a utility (the DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip) to attempt an update and then a root. Well the update failed and now I see this when the phone starts up.
AP Fastboot Flash Mode (S)
Device is LOCKED. Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected
So I figured out that I can get to BP Tools and this somehow bypasses the problem and boots the phone normally. So as long as my wife doesn't turn the phone off, she'll be fine but I cannot leave it this way. I am open to suggestions and at your mercy. Thanks in advance!
-Chad
Click to expand...
Click to collapse

http://forum.xda-developers.com/showthread.php?t=2207419
osk4rin said:
Hello there!
i have the same proble with my xt907 droid razr m verizon 4.4.2.
Did you fix this problem?
can you help mw to fix it,i dont know how
thank you so much!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2207419

zip folder link is not available anymore
zip folder link is not available anymore
do you have the zip available?
many thanks!
ce_lloyd said:
http://forum.xda-developers.com/showthread.php?t=2207419
Click to expand...
Click to collapse

osk4rin said:
zip folder link is not available anymore
do you have the zip available?
many thanks!
Click to expand...
Click to collapse
that hasn't been updated in a long time, likely wouldn't work with the bootloader on your device
what bootloader version is on the device (A P Fastboot version)?
Sent from my KFFOWI using XDA Labs

Flash Failure xt907 droid razr m verizon 4.4.2
I got this flash failure.
sd_shadow said:
that hasn't been updated in a long time, likely wouldn't work with the bootloader on your device
what bootloader version is on the device (A P Fastboot version)?
Sent from my KFFOWI using XDA Labs
Click to expand...
Click to collapse

osk4rin said:
I got this flash failure.
Click to expand...
Click to collapse
there is no error on the screen
that is normal fastboot screen for the xt907
device has the latest bootloader only 183.46.15 firmware will work
use the firmware in my RSD lite thread
http://forum.xda-developers.com/showthread.php?t=3184005
[How To][XT907] Flash Firmware with RSD Lite to restore stock firmware/Unbrick (2015)
Sent from my KFFOWI using XDA Labs
---------- Post added at 04:20 AM ---------- Previous post was at 04:17 AM ----------
if there was an error, it would be lower on the part of screen, that's not showing
Sent from my KFFOWI using XDA Labs

[BRICKED] Droid Razr M

Hello! Not sure how this happened. Last night, my girl turned off her Razr M phone and went to sleep. This morning, she tried to turn it on and it was stuck on the "Motorola" logo. After a while, it said that it failed to boot and gave an error. Sent me straight to AP Fastboot mode.
I started researching and somehow the phone is now bricked.
So, my research took me to download RSD Lite and I tried downloading various ROMs and stuff - I'm really new at doing this with Android so bare with me
The latest thing I tried is the PacMan ROM, but RSD Lite gives me the error: "Please check input file. Eithe rxml format is wrong or image files associated with it are missing."
I read somewhere that it's not necessary to use RSD Lite for ROMs, the thing is I can't access my SD card. I don't have a way of getting anything in or out of it. No other devices.
What can I do at this point? I am willing to try anything to get it working again.
Thanks so much for taking the time to read this

iSleek said:
Hello! Not sure how this happened. Last night, my girl turned off her Razr M phone and went to sleep. This morning, she tried to turn it on and it was stuck on the "Motorola" logo. After a while, it said that it failed to boot and gave an error. Sent me straight to AP Fastboot mode.
I started researching and somehow the phone is now bricked.
So, my research took me to download RSD Lite and I tried downloading various ROMs and stuff - I'm really new at doing this with Android so bare with me
The latest thing I tried is the PacMan ROM, but RSD Lite gives me the error: "Please check input file. Eithe rxml format is wrong or image files associated with it are missing."
I read somewhere that it's not necessary to use RSD Lite for ROMs, the thing is I can't access my SD card. I don't have a way of getting anything in or out of it. No other devices.
What can I do at this point? I am willing to try anything to get it working again.
Thanks so much for taking the time to read this
Click to expand...
Click to collapse
to use a custom rom (PAC Man) you need unlocked bootloader and custom recovery....but if you want to return to factory look at this http://www.andromods.com/tips-trick...oid-razr-m-xt907-stock-original-firmware.html its the easiest method i could find that would help you...heres the firmware to flash with rsd lite.... http://sbf.droid-developers.org/phone.php?device=8 .."Android 4.4.2
Blur_Version.183.46.10.XT907.Verizon.en.US" is the one you want.. hope you get it....
---------- Post added at 12:29 PM ---------- Previous post was at 12:23 PM ----------
and heres a great thread of how to unlock bootloader and install roms and stuff....If you up for it...http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432

Thanks so much for your reply Downloading and trying right now! Will update soon!

crazy4android said:
to use a custom rom (PAC Man) you need unlocked bootloader and custom recovery....but if you want to return to factory look at this http://www.andromods.com/tips-trick...oid-razr-m-xt907-stock-original-firmware.html its the easiest method i could find that would help you...heres the firmware to flash with rsd lite.... http://sbf.droid-developers.org/phone.php?device=8 .."Android 4.4.2
Blur_Version.183.46.10.XT907.Verizon.en.US" is the one you want.. hope you get it....
---------- Post added at 12:29 PM ---------- Previous post was at 12:23 PM ----------
and heres a great thread of how to unlock bootloader and install roms and stuff....If you up for it...http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432
Click to expand...
Click to collapse
It gives me this error message: "Failed flashing process. 1/18 flash partition "gpt.bin" Phone returned FAIL"
I'm downloading an earlier version of the OS to see what happens.. any other ideas?

iSleek said:
It gives me this error message: "Failed flashing process. 1/18 flash partition "gpt.bin" Phone returned FAIL"
I'm downloading an earlier version of the OS to see what happens.. any other ideas?
Click to expand...
Click to collapse
I've heard of the error before from other threas but i dont recall what the problem was...did you install the motorola drivers? I really dnon't know what it could be..I've nevr had any trouble with it and i've done it a couple of times..

iSleek said:
It gives me this error message: "Failed flashing process. 1/18 flash partition "gpt.bin" Phone returned FAIL"
I'm downloading an earlier version of the OS to see what happens.. any other ideas?
Click to expand...
Click to collapse
This guy had the same error read through that post
We cannot teach people anything; we can only help them discover it within themselves.

iSleek said:
It gives me this error message: "Failed flashing process. 1/18 flash partition "gpt.bin" Phone returned FAIL"
I'm downloading an earlier version of the OS to see what happens.. any other ideas?
Click to expand...
Click to collapse
Open the xml inside the zip you're flashing and remove the line:
Code:
<step operation="flash" partition="partition" filename="gpt.bin" MD5="5B3FD782141145E4BD1C9270D954AFF1" />

Yeah modifying the xml file is necessary, but also make sure your phone is charged above 50 percent. Low battery causes some funky errors with RSD.
Also what version of android were you running? I'd try flashing the new stock KK with RSD to at least get it up and running....then worry about flashing a custom.
The good thing is if you're getting into fastboot, you're not hard bricked and it's salvageable with some work!
Sent from my DROID RAZR M using XDA Free mobile app

Is your boot loader unlocked?
Sent from my XT907 using XDA Free mobile app

Hi,
To answer all the questions:
1- Is your boot loader unlocked? No
2- I've modified the XML file and removed the lines I was advised to remove.
3- Not sure what exact version of Android the device was running, as it's not mine. Also, what is "stock KK"???
4- ezknives, I've read through the post and basically the guy removed lines from the XML file - did that, also uninstalled Moto stuff and installed Motocast. No joy.
Right now, RSD shows the error message "Failed flashing process. 1/16 flash sbl1 "sbl1.mbn" -> Phone returned FAIL."
I am using the 4.4.2 firmware found here: http://sbf.droid-developers.org/phone.php?device=8
Other ideas?

One more bit of info. The eBay seller reports the phone had "Android 4.0.4 Ice Cream Sandwich" installed when she purchased it. Not sure if she updated it or not, but I don't think so. Does this new information change anything?
EDIT: I downloaded and tried out the 4.0.4 version from http://sbf.droid-developers.org/phone.php?device=8 but it stops at the same steps, even after editing out the XML file.
Also tried the utility found here: http://forum.xda-developers.com/showthread.php?t=2207419&page=2 (the latest version).. seems that it does some work but the device still doesn't respond. Gets stuck at Android logo.. and I've tried RSD with all I have (4.0.4 and newwer) but no luck.

OK so.. somehow I managed to flash the stock 4.4.2 version after many tries - using RSD.. it now boots but only to a frozen "M" logo.. and keeps cycling back to it.. any ideas?

ezknives said:
This guy had the same error read through that post.
Click to expand...
Click to collapse
Hi, I was able to flash - or so it seems - 4.4.2 but it gets stuck in a loop (motorola logo, turns off, goes back).. unless i put it back in fastboot.
Will unlocking the bootloader help me? I am trying to get Motorola to give me the code/help me with this, as my device does not have USB debugging turned on. But before I continue "fighting" to get the code, I want to make sure i can use it for something. Can you advise me?
Thanks!!!

iSleek said:
Hi, I was able to flash - or so it seems - 4.4.2 but it gets stuck in a loop (motorola logo, turns off, goes back).. unless i put it back in fastboot.
Will unlocking the bootloader help me? I am trying to get Motorola to give me the code/help me with this, as my device does not have USB debugging turned on. But before I continue "fighting" to get the code, I want to make sure i can use it for something. Can you advise me?
Thanks!!!
Click to expand...
Click to collapse
Re-flash 4.4.2 with RSD Lite one more time. I've read that running it (RSD Lite) twice will help to fix the bootloop issue. As far as unlocking your bootloader, Motorola will not give you a code if you do not own a developer model. You'll need to use Motopocalypse to unlock.
> http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432

ezknives said:
This guy had the same error read through that post
We cannot teach people anything; we can only help them discover it within themselves.
Click to expand...
Click to collapse
ATTACK said:
Re-flash 4.4.2 with RSD Lite one more time. I've read that running it (RSD Lite) twice will help to fix the bootloop issue. As far as unlocking your bootloader, Motorola will not give you a code if you do not own a developer model. You'll need to use Motopocalypse to unlock.
> http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432
Click to expand...
Click to collapse
This would be the 4th time successfully flashing 4.4.2 with RSD Lite, but I will do it just to see what happens. About unlocking the bootloader.. it's still not clear to me what I will gain if I can get it unlocked.. Can you enlighten me? Thanks!

iSleek said:
About unlocking the bootloader.. it's still not clear to me what I will gain if I can get it unlocked.. Can you enlighten me? Thanks!
Click to expand...
Click to collapse
Head to the link I posted and read the FAQ section.