Database Users

stuck on Samsung Galaxy Y logo..

Tried flashing a custom firmware, but ended up in a sort of boot loop, so i flashed my old firmware back, but the same problem occures, stuck in a bootloop..
No matter what I flash Im stuck now
help!

Provide more info...
Like which custom firmware you flashed...
How you then flashed the stock rom

I was on DDLC2 HYBRID ROM v3.0
Tried to flash using CWM to [CusRom] Repencis v3 - DXLC1 - TIGA - {Update 02}
But stuck
So I tried flashing using CWM back to HYBRID
stuck
tried flashing using CWM to creeds
stuck
Trying to use odin to flash back to stock to try again, but that's not given me any luck i.e. still stuck

i constantly change roms and i never encounter anything like that.. this week alone i flashed hybrid 3, repencis 3 and chobits 1.4b just to test them out and i never flashed back to default firmware.. try flash again but before you start flashing make sure you wipe data and clear cache
edit
also have you flashed any custom kernel? because as far as i know those roms need to be flashed on stock kernel
Sent from my GT-S5360 using Tapatalk

When I wipe data I get:
E:format_volume: rfs format failed on /dev/stl10

Have you done repartition using odin

Nope, havnt touched any tickboxes, left all as default

Which firmware did you flashed using odin....
from sammobiles or where
Solution will be
Use odin 1.85(supports sgy)
Download odin supported stock firmware from doky's post in dev section
flash with repartition checked... Use totoro___.pit
if not working after this... You must be having a hardware issue... Have warranty then good to go.
*remember I'm not responsible if any thing happens to your phone

iRhyiku said:
I was on DDLC2 HYBRID ROM v3.0
Tried to flash using CWM to [CusRom] Repencis v3 - DXLC1 - TIGA - {Update 02}
But stuck
So I tried flashing using CWM back to HYBRID
stuck
tried flashing using CWM to creeds
stuck
Trying to use odin to flash back to stock to try again, but that's not given me any luck i.e. still stuck
Click to expand...
Click to collapse
as long as you are able to go into download mode, you are still good. Just make sure that before and after you flash the new stock firmware, you should always "wipe date and cache" both via stock recovery and cwm.

Thanks that worked i was using a wrong firmware for odin. All good now
Sent from my GT-S5360 using xda premium

It's good to hear your problem is solved.
I assume you have already given thanks to doky for his excellent work.
I think the thread must be closed now.

Well, i have that issue with a galaxy s Young from ClaroPR(5360L). I have tried all firmwares available also from sammobile. Thing is that when the phone reboots after a successful flash it will go to recovery to apply csc and all the stuff and says cant mount E:/data or something like that. It will reboot itself but stays on a bootloop, splash screen and reboots again. Does someone have had this issue?

Changing with custom kernel is a bit rough, try to use the lite versions of roms
Sent from my GT-S5360 using xda premium

same probbb.....
even i'm facin de same problem..
hw did u get back ur original firmware...
plz gimme the links

Aady_m said:
even i'm facin de same problem..
hw did u get back ur original firmware...
plz gimme the links
Click to expand...
Click to collapse
have a look at the 8th post on 1st page.

HELPPPPPPP!!!!! my galaxy y is going like this...
"CANT MOUNT" when i am rebooting ... what will i do.... PLSSSS HELP:crying:

TuDecks said:
HELPPPPPPP!!!!! my galaxy y is going like this...
"CANT MOUNT" when i am rebooting ... what will i do.... PLSSSS HELP:crying:
Click to expand...
Click to collapse
Try flashing stock using odin might help!!! i have had almost similar prob!! not exactly the same though!!:good:

i already used odin... but im still stuck .. my friends' memcard was reformat

try using ODIN and follow instructions

Does anyone can help me i tried to flash my phone and i finished,and now i m stuck at welcome screen and my galaxy y won t go into recovery mode. Help me please!

(Q) (Solved) Problems with upgrading and rebooting

Hi guys. First of all it's gonna be my first thread. That's way I wanna say hello to everyone. Anyway. I just tried to upgrade my Samsung Galaxy S Gt-I9000 to ICS 4.0 and I followed pinappu. hubpages. com/hub/Samsung-Galaxy-S-firmware-update-to-Android-40-aka-Ice-Cream-Sandwich instructions. My phone installed the upgrading files successfully. After rebooting my phone didn't turn on. I can't start my phone even in recovery mode but download mode is working. What should I do?
Yours
Sir_Night
---
Sorry for my lexical and grammatical errors. English isn't my native language.

Boot into download and flash a GB rom through Odin. Then flash a kernel with CWM (like Semaphore). Download any ICS rom zip file and flash it twice (it will bootloop or reboot recovery after the first flash).
The instructions and links to tutorials/videos for installing roms are usually in the rom's OP so you can just follow that.

Captain_17 said:
Boot into download and flash a GB rom through Odin. Then flash a kernel with CWM (like Semaphore). Download any ICS rom zip file and flash it twice (it will bootloop or reboot recovery after the first flash).
The instructions and links to tutorials/videos for installing roms are usually in the rom's OP so you can just follow that.
Click to expand...
Click to collapse
Thank you for your reply. I just flashed GB 2.3.6 rom and now my phone is working. Thank you. I'm not sure about ICS anymore

If you only want the appearance of ICS use SauROM and then flash the ICS theme. It looks just like ICS but is obviously still GB.

When bootloop or no CWM occurs after flashing from GB -> ICS:
-remove battery
-download a ICS kernel to your PC.
eg. Semaphore ICS http://forum.xda-developers.com/showthread.php?p=21910951
-start Odin and put .tar in PDA field. Untick repartition.
-insert battery and go download mode.
-connect usb to PC and flash ICS kernel.
Next boot of phone should be normal ICS.

[Q] Need stock rom and flashing method i9506

Hello there..
I have a Galaxy s4 lte qualcomm 4g.
Flashed cm11 4.4.4
CyanogenMod Version : 11-20150102-unofficial-ks01lte
Base-band : i9506XXUCNJ1
Recovery : Philz touch recovery 6.x.x.x
I want to revert back to stock android touch-wiz 4.4.2 but unable to find the Odin flash-able file or cwm flash file.
Can anyone give some clear instruction on how to go back to stock and download sources ????
Any help would be greatly appreciated.

born_high said:
Hello there..
I have a Galaxy s4 lte qualcomm 4g.
Flashed cm11 4.4.4
CyanogenMod Version : 11-20150102-unofficial-ks01lte
Base-band : i9506XXUCNJ1
Recovery : Philz touch recovery 6.x.x.x
I want to revert back to stock android touch-wiz 4.4.2 but unable to find the Odin flash-able file or cwm flash file.
Can anyone give some clear instruction on how to go back to stock and download sources ????
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Download Sources and flashing procedure are here thanks to @DeHAWK
http://forum.xda-developers.com/showthread.php?t=2597058
next time search in the forums before creating new threats its against xda rules

bryanfeanor said:
Download Sources and flashing procedure are here thanks to @DeHAWK
http://forum.xda-developers.com/showthread.php?t=2597058
next time search in the forums before creating new threats its against xda rules
Click to expand...
Click to collapse
Well i kind of know the rules of XDA.
But here's the catch, i have tried that method mentioned above.
Downloaded the .tar file and flashed via Odin. And now my phone is stuck on Samsung logo forever.
That's why posted here.
Here's some screenshots of odin

born_high said:
Well i kind of know the rules of XDA.
But here's the catch, i have tried that method mentioned above.
Downloaded the .tar file and flashed via Odin. And now my phone is stuck on Samsung logo forever.
That's why posted here.
Here's some screenshots of odin
Click to expand...
Click to collapse
Hey
You are only flashing a kernel...not a full 4.4.2 original image.
And that's why you're stock on the boot logo.
Regards.

born_high said:
Well i kind of know the rules of XDA.
But here's the catch, i have tried that method mentioned above.
Downloaded the .tar file and flashed via Odin. And now my phone is stuck on Samsung logo forever.
That's why posted here.
Here's some screenshots of odin
Click to expand...
Click to collapse
For the complete image, you can get from here:
http://samsung-updates.com/device/?id=GT-I9506
or here:
http://www.sammobile.com/firmwares/database/GT-I9506/

born_high said:
Well i kind of know the rules of XDA.
But here's the catch, i have tried that method mentioned above.
Downloaded the .tar file and flashed via Odin. And now my phone is stuck on Samsung logo forever.
That's why posted here.
Here's some screenshots of odin
Click to expand...
Click to collapse
As mentioned you are flasing only kernel, i use odin 1.85
stock 5.0.1 roms mega mirrors http://forum.xda-developers.com/gal...06-lolipop-official-samsung-firmware-t3023794 thanks to @Mar10
and tar files from 4.4.2 open nordic countries thanks to @DeHAWK
XXUCNJ11 https://mega.co.nz/#!cNE3nDSB!zjPWcM7OI-ltonzAuMKDdREinHr6ilm-ZBg0oqxD2k8
XXUCNI1 https://mega.co.nz/#!1EtAWTQB!zHVAwXe3odz6ipvhZmpdSXUnTKy1w_oYRpRlRMRa6DQ
take the battery out wait 5-10 secs and enter to download mode to avoid modem issues.
its not recomendable but if you have a backup of a pit file for your phone select it and thick re-partition, this is dangerous but may help with bootloop only if flashing the firmware with no repartition work, repartition with out a pit file may brick your device.

bryanfeanor said:
As mentioned you are flasing only kernel, i use odin 1.85
stock 5.0.1 roms mega mirrors http://forum.xda-developers.com/gal...06-lolipop-official-samsung-firmware-t3023794 thanks to @Mar10
and tar files from 4.4.2 open nordic countries thanks to @DeHAWK
XXUCNJ11 https://mega.co.nz/#!cNE3nDSB!zjPWcM7OI-ltonzAuMKDdREinHr6ilm-ZBg0oqxD2k8
XXUCNI1 https://mega.co.nz/#!1EtAWTQB!zHVAwXe3odz6ipvhZmpdSXUnTKy1w_oYRpRlRMRa6DQ
take the battery out wait 5-10 secs and enter to download mode to avoid modem issues.
its not recomendable but if you have a backup of a pit file for your phone select it and thick re-partition, this is dangerous but may help with bootloop only if flashing the firmware with no repartition work, repartition with out a pit file may brick your device.
Click to expand...
Click to collapse
Thank you for the reply
I will give it a try and let you know the results.

One more noob question..
I did a back up of my touchwiz before converting to CM.
And i got the back up file as normal file folder instead a zip file.
I wonder if there is a way to restore it.
I already tried zipping it and restoring from philz recovery...but it says bad file.
Screenshots of Backup :

born_high said:
One more noob question..
I did a back up of my touchwiz before converting to CM.
And i got the back up file as normal file folder instead a zip file.
I wonder if there is a way to restore it.
I already tried zipping it and restoring from philz recovery...but it says bad file.
Screenshots of Backup :
Click to expand...
Click to collapse
you´re welcome.
did you do the backup from philz recovery? i never did a backup from recovery, only with titanium, so i really dont know, but to restore a backup needs to be done from the same source that the backup was created. for the screen shots looks like a CWM recovery backup good luck.

bryanfeanor said:
you´re welcome.
did you do the backup from philz recovery? i never did a backup from recovery, only with titanium, so i really dont know, but to restore a backup needs to be done from the same source that the backup was created. for the screen shots looks like a CWM recovery backup good luck.
Click to expand...
Click to collapse
sLIGHTLY RE-eDIT OF PREVIOUS POST :
yes its a cwm backup file created with philz..
And i was able to restore it via the recovery under restore oiption.
but after the first samsung screen (samsung galaxy s4) and a blue T logo, it gets struck on the third screen with only samsung written on it with a solid blue led.
(( what the heck am i doing wrong.

Anyway i flashed the full image with odin..(taken from your link).
And back to touchwiz again.
Thanks a lot.
One more thing is, it changed my baseband version a bit.
Build number : I9506XXUCNJ1
bASEBAND vERSION : I9506XXUCNF3
IS THAT A PROBLEM ?
BEST REGARDS.

born_high said:
sLIGHTLY RE-eDIT OF PREVIOUS POST :
yes its a cwm backup file created with philz..
And i was able to restore it via the recovery under restore oiption.
but after the first samsung screen (samsung galaxy s4) and a blue T logo, it gets struck on the third screen with only samsung written on it with a solid blue led.
(( what the heck am i doing wrong.
Click to expand...
Click to collapse
T logo?
well the backup is from another build xxucnj2 from the screen shots,try restoring only data in adavance restore option or reflash this
http://www.sammobile.com/firmwares/download/39412/I9506XXUCNJ2_I9506TELCNJ1_TEL.zip/ and try again, you may have to create an account to download the file is free,

bryanfeanor said:
T logo?
well the backup is from another build xxucnj2 from the screen shots,try restoring only data in adavance restore option or reflash this
http://www.sammobile.com/firmwares/download/39412/I9506XXUCNJ2_I9506TELCNJ1_TEL.zip/ and try again, you may have to create an account to download the file is free,
Click to expand...
Click to collapse
Sorry to bother you again.
But i am facing a new kinda problem now with custom recoveries.
After flashing NEE-I9506XXUCNJ1-20141114075501 yesterday it got auto updated to 5.0.1 lollipop .
Now i am stuck with stock recovery.
Tried to flash philz 6.x.x.x as before with odin. The odin process completes itself and reboots the phone.
But when i try to get into recovery still its booting in stock recovery.
Any solution on how can i flash custom recovery on this ?
Additional info
Baseband version : I9506XXUDOA6
bUILD NUMBER : LRX22C. I9506XXUDOA6

Flash your Favorite Custom Recovery with Odin 3.xx and put it to AP. Check that Auto Reboot isn't marked. After successful flashing your Phone won't to reboot. USB Cable out and put your Battery out and wait few seconds. Put your Battery in and reboot it to Recovery. The Stock Recovery can't now overwrite the Custom Recovery.

born_high said:
Sorry to bother you again.
But i am facing a new kinda problem now with custom recoveries.
After flashing NEE-I9506XXUCNJ1-20141114075501 yesterday it got auto updated to 5.0.1 lollipop .
Now i am stuck with stock recovery.
Tried to flash philz 6.x.x.x as before with odin. The odin process completes itself and reboots the phone.
But when i try to get into recovery still its booting in stock recovery.
Any solution on how can i flash custom recovery on this ?
Additional info
Baseband version : I9506XXUDOA6
bUILD NUMBER : LRX22C. I9506XXUDOA6
Click to expand...
Click to collapse
in lollipop i used TWRP recovery (TWRP_2.8.4.0_ks01lte_20150207.tar.md5)https://www.mediafire.com/folder/p3rwwfm7xn76x/TWRP flashed with odin 1.85 no problems.
but after rooting with cf autoroot http://download.chainfire.eu/502/CF-Root/CF-Auto-Root/CF-Auto-Root-ks01lte-ks01ltexx-gti9506.zip( extract and flash with odin in pda) because cf autorrot flash stock recovery after rooting.
Important after rooting flash immediately custom recovery, if you boot in stock recovery after root all apps will force close and you will need to wipe data (stock recovery wipe data will delete internal memory as well), so do not boot in stock recovery.

bryanfeanor said:
in lollipop i used TWRP recovery (TWRP_2.8.4.0_ks01lte_20150207.tar.md5)https://www.mediafire.com/folder/p3rwwfm7xn76x/TWRP flashed with odin 1.85 no problems.
but after rooting with cf autoroot http://download.chainfire.eu/502/CF-Root/CF-Auto-Root/CF-Auto-Root-ks01lte-ks01ltexx-gti9506.zip( extract and flash with odin in pda) because cf autorrot flash stock recovery after rooting.
Important after rooting flash immediately custom recovery, if you boot in stock recovery after root all apps will force close and you will need to wipe data (stock recovery wipe data will delete internal memory as well), so do not boot in stock recovery.
Click to expand...
Click to collapse
You are a life saver man, you know that .
I will give it a shot and let you know the results.

Phew finally its done...
Thank you guys for keeping up with my noob questions.
happy Androiding

born_high said:
Phew finally its done...
Thank you guys for keeping up with my noob questions.
happy Androiding
Click to expand...
Click to collapse
You´re welcome, we all were noobs, and in somethings we still are, thats the best part of this, something new comes everytday so much to learn and do.

how to flash rom in ms103g?

Please Help me
I have grand 2. Stock rom 4.3 jelly bean. Rooted using kingroot apk.
And my device is ms103g. I repeat ms103g.
It has only one cwm recovery beta version.
I flashed it via odin.
After flashing a custom rom NOTE 4 ALPHA S6 PORT or ROM KK TECHMATE S ROM V1.0 4.4.2 NH3. It was flashed but when I reboot it stucks on boot logo.
After this I was switched off my mobile and rebooted to recovery. In mount s
ection system and data are not mounted. I was remount it and reboot but nothing happened please help me how to flash custom rom. Or is there any other recovery. Thanks in advance. Sorry for my bad English.

vowels787 said:
Please Help me
I have grand 2. Stock rom 4.3 jelly bean. Rooted using kingroot apk.
And my device is ms103g. I repeat ms103g.
It has only one cwm recovery beta version.
I flashed it via odin.
After flashing a custom rom NOTE 4 ALPHA S6 PORT or ROM KK TECHMATE S ROM V1.0 4.4.2 NH3. It was flashed but when I reboot it stucks on boot logo.
After this I was switched off my mobile and rebooted to recovery. In mount s
ection system and data are not mounted. I was remount it and reboot but nothing happened please help me how to flash custom rom. Or is there any other recovery. Thanks in advance. Sorry for my bad English.
Click to expand...
Click to collapse
try twrp for ms013g..it that too dosen't work,reflash stock rom via odin.

neonkat said:
try twrp for ms013g..it that too dosen't work,reflash stock rom via odin.
Click to expand...
Click to collapse
I was also did. But blank recovery open and phone reboot.
My device is ms103g and there is all recovery for ms013g.
In terminal emualter app it shows [email protected] I m very confused.

vowels787 said:
I was also did. But blank recovery open and phone reboot.
My device is ms103g and there is all recovery for ms013g.
In terminal emualter app it shows [email protected] I m very confused.
Click to expand...
Click to collapse
flash stock rom via odin

U need flash kitkat stock den do

SM-G7102 TWRP installed via Flashify. But not working !!!! PLEASE HELP HELP HELP !!!

I went to install a custom OS for the very first time. I rooted my device with KingRoot and tried installing custom recovery via Flashify and i used a image file to flash the device and now when i boot the device it comes up with Samsung logo and then a blurred color screen and then blank screen. What should i do know... PLEASE SOMEONE HELP ME.

Two chances
1. You might have chosen boot image instead of recovery image option in flashify. boot image is kernel. device won't boot without kernel.
2. You have flashed wrong recovery image. you have to flash a working recovery image. make sure you downloaded right file.
Solutions
*If you have flashed Boot Image, then you have to download stock rom and flash it via Odin using a computer
*If you are flashed wrong recovery image then you can fix it by flashing right recovery.tar using odin
in both case you need a computer.
I suggest that you should go for an experts help.
You can find stock rom link and recovery.tar files at grand 2 general forum.

JitDevHacker said:
Two chances
1. You might have chosen boot image instead of recovery image option in flashify. boot image is kernel. device won't boot without kernel.
2. You have flashed wrong recovery image. you have to flash a working recovery image. make sure you downloaded right file.
Solutions
*If you have flashed Boot Image, then you have to download stock rom and flash it via Odin using a computer
*If you are flashed wrong recovery image then you can fix it by flashing right recovery.tar using odin
in both case you need a computer.
I suggest that you should go for an experts help.
You can find stock rom link and recovery.tar files at grand 2 general forum.
Click to expand...
Click to collapse
Thank you for your response. I installed the stock ROM using ODIN. And now, my phone is doing well. Fortunately, I upgraded from Jelly Bean to Kitkat. xD