Database Users

[Look Here] Problems with KitKat + bootloader N9005XXUENA6

So instead of having 300 threads about bootloader issues with the new KitKat, If everyone posts here they can see if their question has been answered already, and to share new info.
**This applies to bootloader N9005XXUENA2 which has come with the new version of KitKat 4.4.2**
[*]You cannot downgrade to 4.3 including custom and AOSP ROMs currently.
[*]Root does work, but it seems now and again it can cause issues, so you need to reflash 4.4.2 and then re-root (seems to be the only fix right now)
[*]Custom Kernels are NOT working currently
[*]Custom Recovery is available however, check out Chenglu's CWM for KK
[*] Hong Kong Variants (16GB) have issues with Ext4 fail when flashing, there is no fix right now. DO NOT FLASH IF YOU HAVE ONE
If people can just leave their advice / help, I'm sure it'll save us ALL a lot of time scanning through 100s of threads.
Thanks.

Thank you! We can get a centralized info sharing event going on~!
So far it seems my friend is experiencing some serious heat issues. which got resolved after a few hours. but this was after flashing and then resting then using for first time on kitkat after reboot.
He did not factory reset.

Hong Kong 16 GB N9005 bricked after 4.4.2 via Odin
Dear friends, please help.
I tried installing the 4.4.2 official poland XEO-N9005XXUENA6-20140113093221 on my Hong Kong N9005 16GB handset. I tried both the multifile and the single file ROMs. I am not rooted.
My phone no longer can access recovery mode. Instead it shows : "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I tried Kies 3, but kies noes not recognise the phone. It says Kies does not support this device.
When in download mode and installing ROM, it stops at ext4 and says "Odin: Invalid ext4 image".
I tried with PIT file, but then it stops at repartitioning, and shows PIT FAIL.
ODIN Log:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Ext4)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any way to revive my phone?

rinuvimal said:
Dear friends, please help.
I tried installing the 4.4.2 official poland XEO-N9005XXUENA6-20140113093221 on my Hong Kong N9005 16GB handset. I tried both the multifile and the single file ROMs. I am not rooted.
My phone no longer can access recovery mode. Instead it shows : "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I tried Kies 3, but kies noes not recognise the phone. It says Kies does not support this device.
When in download mode and installing ROM, it stops at ext4 and says "Odin: Invalid ext4 image".
I tried with PIT file, but then it stops at repartitioning, and shows PIT FAIL.
ODIN Log:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Ext4)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any way to revive my phone?
Click to expand...
Click to collapse
Majority of the Ext4 issues seem to have stemmed from the HK 16GB version, there *may* be no other way to fix currently. If you have tried all the known fixes, PIT file, re-flashed stock again etc. I am out of idea personally

radicalisto said:
Majority of the Ext4 issues seem to have stemmed from the HK 16GB version, there *may* be no other way to fix currently. If you have tried all the known fixes, PIT file, re-flashed stock again etc. I am out of idea personally
Click to expand...
Click to collapse
I have the 32gb HK n9005 and I can't flash anything other than HK firmware either.
At least I was able to flash cwm and flash custom Roms, so I'm happy.
Sent from my SM-N9005 using XDA Premium 4 mobile app

radicalisto said:
**This applies to bootloader N9005XXUENA2 which has come with the new version of KitKat 4.4.2**
Click to expand...
Click to collapse
What did you mean bootloader N9005XXUENA2?
Plz be noted that this leaked firmware comes with Bootloader N9005XXUENA6, Baseband N9005XXUENA2.

NEE devices will not have audio with the Polish 4.4.2. Can't make calls or recieve. Can still text and use data, however.
If you were dumb like me and flashed 4.4.2 you'll need to set the device to silent and then not even try to open dialer or get/make a call. System will be totally unresponsive for a while before letting you back out of things. :/ No way to fix until another region gets 4.4.2

nex7er said:
NEE devices will not have audio with the Polish 4.4.2. Can't make calls or recieve. Can still text and use data, however.
If you were dumb like me and flashed 4.4.2 you'll need to set the device to silent and then not even try to open dialer or get/make a call. System will be totally unresponsive for a while before letting you back out of things. :/ No way to fix until another region gets 4.4.2
Click to expand...
Click to collapse
Not experiencing anything like that. Maybe you need to re flash the Rom.
My biggest concern still is the rotation problem after rooting and removing some normal apps like flip board and ever note.
Sent from my SM-N9005 using XDA Premium 4 mobile app

Wouldn't you be able to flash back to 4.3 if you first flash a 4.3 bootloader?
Sent from my SM-N9005 using Tapatalk

MohJee said:
Wouldn't you be able to flash back to 4.3 if you first flash a 4.3 bootloader?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
When attempting to flash 4.4.2, the 4.4 bootloader would have been installed. Once that is installed, cannot be downgraded to 4.3 bootloader, unfortunately.

are we getting off topic?
Sent from my SM-N900W8 using XDA Premium 4 mobile app

Is it possible that we flash 4.3 bootloader and downgrade to 4.3? I got very low benchmark with this kit kat around 29000. Even the sview cover not working now.
Sent from my SM-N9005 using XDA Premium 4 mobile app

vndnguyen said:
What did you mean bootloader N9005XXUENA2?
Plz be noted that this leaked firmware comes with Bootloader N9005XXUENA6, Baseband N9005XXUENA2.
Click to expand...
Click to collapse
I pasted it in and couldn't edit the title
MohJee said:
Wouldn't you be able to flash back to 4.3 if you first flash a 4.3 bootloader?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Afraid not, once you upgrade you're stuck.
rinuvimal said:
When attempting to flash 4.4.2, the 4.4 bootloader would have been installed. Once that is installed, cannot be downgraded to 4.3 bootloader, unfortunately.
Click to expand...
Click to collapse
Yup this is 100% accurate.
1sagain said:
are we getting off topic?
Sent from my SM-N900W8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hehehe slightly
fadhil3536 said:
Is it possible that we flash 4.3 bootloader and downgrade to 4.3? I got very low benchmark with this kit kat around 29000. Even the sview cover not working now.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nope, not possible. Once you upgrade to the new Bootloader you are stuck with it until further notice.. And I doubt there will be an exploit to go back to 4.3 as there wasn't one with below MJ7

radicalisto said:
I pasted it in and couldn't edit the title
Click to expand...
Click to collapse
Click Edit/Delete and then Go Advanced to edit the title.

SG NOTE 3 HK Variant
Hi, just want to make a Question. How about this one:
Model: SM-N9005
Country: Hong Kong
Version: Android 4.3
Changelist: 2061029
Build date: Tue, 05 Nov 2013 06:08:04 +0000
Product Code: TGY
PDA: N9005ZHUDMK1
CSC: N9005ZZHDMK1
MODEM: N9005ZHUDMJ9
Is the HK n9005 32gb Variant affected with the bootloader error?
Thanks

I think salvation may be on her way, since Samsung released their source codes.... Let's see how great these devs are out there
Sent from my SM-N9005 using XDA Premium 4 mobile app

raver099 said:
I think salvation may be on her way, since Samsung released their source codes.... Let's see how great these devs are out there
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Source code for what?

DennGiuseppe said:
Hi, just want to make a Question. How about this one:
Model: SM-N9005
Country: Hong Kong
Version: Android 4.3
Changelist: 2061029
Build date: Tue, 05 Nov 2013 06:08:04 +0000
Product Code: TGY
PDA: N9005ZHUDMK1
CSC: N9005ZZHDMK1
MODEM: N9005ZHUDMJ9
Is the HK n9005 32gb Variant affected with the bootloader error?
Thanks
Click to expand...
Click to collapse
All Hong Kong version cannot flash with any others country stock ROM as they are not friendly with others country Note 3.
I read gfans chinese forum mention 32GB also not working.
Hong Kong edition is alone, we also can't flash their ROM as will soft brick also.

DennGiuseppe said:
Hi, just want to make a Question. How about this one:
Model: SM-N9005
Country: Hong Kong
Version: Android 4.3
Changelist: 2061029
Build date: Tue, 05 Nov 2013 06:08:04 +0000
Product Code: TGY
PDA: N9005ZHUDMK1
CSC: N9005ZZHDMK1
MODEM: N9005ZHUDMJ9
Is the HK n9005 32gb Variant affected with the bootloader error?
Thanks
Click to expand...
Click to collapse
Hey there my friend. I think you just need to wait for your official update of Kitkat or let's wait for the great devs here to have a solution on the Hongkong firmwares problem.

Andrewtst said:
All Hong Kong version cannot flash with any others country stock ROM as they are not friendly with others country Note 3.
I read gfans chinese forum mention 32GB also not working.
Hong Kong edition is alone, we also can't flash their ROM as will soft brick also.
Click to expand...
Click to collapse
Hi, i'm on Baseband MJ9 with MK1 CSC rooted and custom cwm recovery user.
i flashed custom roms with other country and it works fine like jackaway/xnote/crash rom.
i'm just not sure if all mj9 baseband with mk1 csc are all came from Hong Kong.
Hope that there is someone here with mj9 baseband / mk1 csc updated their firmware to poland 4.4.2 kitkat.

[Q&A] [CF-ROOT][SM-G7102][4.3] Root Galaxy Grand 2

Q&A for [CF-ROOT][SM-G7102][4.3] Root Galaxy Grand 2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

Rooting SM-G7102 with the latest Kitkat update (G7102DDUBNJ2)?
Hi, new here in XDA. Have anyone rooted SM-G7102 with Kitkat's latest firmware G7102DDUBNJ2?
I recently updated my SM-G7102 from NH6 that was rooted using CF-Root before. I just unrooted it as it was instructed in Samsung Kies 3. Thanks all.

root for galaxy grand 2 sm-g7102 kit kat
Please help me i need root for my phone galaxy grand 2 sm-g7102 kit kat 4.4.2

sireies said:
Hi, new here in XDA. Have anyone rooted SM-G7102 with Kitkat's latest firmware G7102DDUBNJ2?
I recently updated my SM-G7102 from NH6 that was rooted using CF-Root before. I just unrooted it as it was instructed in Samsung Kies 3. Thanks all.
Click to expand...
Click to collapse
Same here . Did anyone rooted NJ2 firmware. Seems our earlier method not working. Appreciate your help.
Sent from my SM-G7102 using Tapatalk

Fail to understand how so many people actually ask a question for a reply which is already available. please search before you ask questions as the answer that you are looking for is already available in the forums. We are only bloating the forum.
If you are too lazy to search, no one will help you.
have you looked at http://forum.xda-developers.com/galaxy-grand-2/general/guide-easily-root-galaxy-grand-2-sm-t2812807
NO. you haven't.
schubeir

schubeir said:
Fail to understand how so many people actually ask a question for a reply which is already available. please search before you ask questions as the answer that you are looking for is already available in the forums. We are only bloating the forum.
If you are too lazy to search, no one will help you.
have you looked at http://forum.xda-developers.com/galaxy-grand-2/general/guide-easily-root-galaxy-grand-2-sm-t2812807
NO. you haven't.
schubeir
Click to expand...
Click to collapse
Let's not be aggressive Mr. Schubeir. Hope you didn't have the opportunity to understand the real need. I am aware there is a rooting possibility. However it breaks the warranty by updating knox binary. If you have a solution for rooting without voiding the warranty , then help the people else don't jump with your hard words. In this world no one is having complete knowledge . Neither me nor you.
Sent from my SM-G7102 using Tapatalk

anand4edu said:
Let's not be aggressive Mr. Schubeir. Hope you didn't have the opportunity to understand the real need. I am aware there is a rooting possibility. However it breaks the warranty by updating knox binary. If you have a solution for rooting without voiding the warranty , then help the people else don't jump with your hard words. In this world no one is having complete knowledge . Neither me nor you.
Sent from my SM-G7102 using Tapatalk
Click to expand...
Click to collapse
Tried downgrading to NH6?
You can root that safely.

Poor me got to know after i tried upgrading to NJ2 and rooting. My Knox updated 0x1 and my warranty is voided. Tried downgrading but d knox not resetting. any solution for me?

help smg 7105
There is no link for this phone on CF how can I root this SmG7105

It gets install first then the error starts occuring, plz help in this matter.
Respected Sir, I had installed the CF-Autoroot on my Grand 2 device. But worked fine first for 4-5 days, but later when I restarted the phone, the internal memory & external memory both were locked, infact there was lot of space to work. plz do something in the CF-AUTOROOT software, so that it can work well on my device. yes and the Mobile was INDIAN Model.
Wishing a POSITIVE reply. Thank You

Smg 7102
Hy friends
After root can i connect otg cable &pendrive in my smg 7102.
Anwer fast.
Thanks

Suva Ghelu said:
Hy friends
After root can i connect otg cable &pendrive in my smg 7102.
Anwer fast.
Thanks
Click to expand...
Click to collapse
No it doesn't work like that

sorry for my noob question, but will this cf-root trip the KNOX?

It's working..
I love you guys..

Need help!
Guys I did as mentioned but after rebooting when i go to root checker and check, It says that "Root access is not properly installed on this device".
Also when i try to open SuperSU, it says there is no SU binary installed and SuperSU cannot install it. This is a problem.
What should I do now? That means the root was unsuccessful right?

Rooting my SM-G7102
I've tried rooting my grand 2 SM-G7102 using odin.exe but when i tried using the .tar file it was like :
<id:0 005=""> Added!!
<id:0 005=""> Odin v.3 engine (ID:5)..
<id:0 005=""> File analysis..
<id:0 005=""> SetupConnection..
<id:0 005=""> Initialzation..
<id:0 005=""> Get PIT for mapping..
<id:0 005=""> Firmware update start..
<id:0 005=""> aboot.mbn
<id:0 005=""> NAND Write Start!!
<id:0 005=""> FAIL! (Auth)
<osm> All threads completed. (succeed 0 / failed 1)
how to solve??

Aashir_HZ said:
Guys I did as mentioned but after rebooting when i go to root checker and check, It says that "Root access is not properly installed on this device".
Also when i try to open SuperSU, it says there is no SU binary installed and SuperSU cannot install it. This is a problem.
What should I do now? That means the root was unsuccessful right?
Click to expand...
Click to collapse
Would anybody reply please!!!

[Q]Help with rooting - Odin3 error

Alright so I switched from an Apple to and Android and now would love to root my samsung galaxy s5 g900a (yea i know, its a ***** of a version). Towelroot only allows phones that pre-date june 3 2014 to be edited, so I tried to find a decent firmware that predates this and use odin3 to flash my phone. I went to Sammobile after reading through 40+ pages of instructions, downloaded this: (I can't post links so I'll post the info)
Model: SM-G900A
Model name: GALAXY S5
Country: USA (AT&T)
Version: Android 4.4.2
Changelist: 964333
Build date: Fri, 14 Mar 2014 04:15:55 +0000
Product Code: ATT
PDA: G900AUCU1ANCE
CSC: G900AATT1ANCE
MODEM: G900AUCU1ANCE
Then I followed the instructions and received this error from Odin3:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I read up and found out I had to have a specific PIT. Well that's great but there's almost no information on what PIT I need? I've searched for over 4 hours and have had no luck finding an answer. I'm not even sure how to install said PIT if I did find it. I have no issue teaching myself if someone does not want to spoon feed information, but please could any one point me in the right direction as to what my next step would be? I would love to root my device.
Thanks,
Z

You probably didn't disabled reactivation lock. It's under Security.

AlwaysAndroid said:
You probably didn't disabled reactivation lock. It's under Security.
Click to expand...
Click to collapse
You might be right. I'll test it later tonight and facepalm if it was something so simple.

And for your information, you DON'T even need to install a WHOLE firmware.....
Just the kernel.......
Then root it......
Then re install your original kernel.....
Job done.....
This thread.....
http://forum.xda-developers.com/showthread.php?t=2843044
gives full instructions.......
Sent from my rooted kn0x0 SM-G900F S5

keithross39 said:
And for your information, you DON'T even need to install a WHOLE firmware.....
Just the kernel.......
Then root it......
Then re install your original kernel.....
Job done.....
This thread.....
http://forum.xda-developers.com/showthread.php?t=2843044
gives full instructions.......
Sent from my rooted kn0x0 SM-G900F S5
Click to expand...
Click to collapse
Alright I read through that, seems simple enough but... I don't see any g900a kernels uploaded. Is there a trustworthy site that would have my specific kernel uploaded?
I think I'm forced to do an entire firmware because of my model number. I'll search more in the meantime before I do it, but if you see this and know off the top of your head where I can get a kernel that works with my galaxy, I'd appreciate it.
Thanks!

Zestro said:
Alright I read through that, seems simple enough but... I don't see any g900a kernels uploaded. Is there a trustworthy site that would have my specific kernel uploaded?
I think I'm forced to do an entire firmware because of my model number. I'll search more in the meantime before I do it, but if you see this and know off the top of your head where I can get a kernel that works with my galaxy, I'd appreciate it.
Thanks!
Click to expand...
Click to collapse
Theres a thread for this in the att s5 section with a download and instructions.
Sent from my SM-G900A using Tapatalk

Rakuu said:
Theres a thread for this in the att a5 section with a download and instructions.
Sent from my SM-G900A using Tapatalk
Click to expand...
Click to collapse
a5 section? Do you mean the s5 section? I'm looking right now in the s5 section, hopefully I'm not an idiot this time around.
Edit: think I finally found the thread. Thanks for letting me know it existed.

Zestro said:
a5 section? Do you mean the s5 section? I'm looking right now in the s5 section, hopefully I'm not an idiot this time around.
Edit: think I finally found the thread. Thanks for letting me know it existed.
Click to expand...
Click to collapse
Yep, apologize for the confusiob from the typo.
Sent from my SM-G900A using Tapatalk

downgrade from 6.0.1 to 5.1.1

hello ,
i updated my Galaxy note 4 N910C form 5.1.1 lollipop TO 6.0.1 marshmallow
now i want to roolback to 5.1.1 lollipop , i've downloaded the room from SamMobile as i did withe the 6.0.1 and tried to flash it via Odin only this time an error appear
ps: i've also tried 3 other official rooms from SamMobile as well , but the same error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse

adilplusk said:
hello ,
i updated my Galaxy note 4 N910C form 5.1.1 lollipop TO 6.0.1 marshmallow
now i want to roolback to 5.1.1 lollipop , i've downloaded the room from SamMobile as i did withe the 6.0.1 and tried to flash it via Odin only this time an error appear
ps: i've also tried 3 other official rooms from SamMobile as well , but the same error
Click to expand...
Click to collapse
But MM working?
Use new XSG 6.0.1 and wait for official MM in ur contry,or try to change USB port or on another computer(and always use ORIGINAL USB FROM SAMMY)
Ps:I succes rollback from MM(XEO) to LL(SEE)N910CXXS2CPB3...

Jovan1997 said:
But MM working?
Use new XSG 6.0.1 and wait for official MM in ur contry,or try to change USB port or on another computer(and always use ORIGINAL USB FROM SAMMY)
Ps:I succes rollback from MM(XEO) to LL(SEE)N910CXXS2CPB3...
Click to expand...
Click to collapse
What is XSG? Im interested i getting back to complete stock, as in whatever my phone came with when purchased (I'm in the US on the N910C) ,as opposed to the Poland XEO firmware.
Sent from my 6045O using XDA-Developers mobile app

carnivalrejectq said:
What is XSG? Im interested i getting back to complete stock, as in whatever my phone came with when purchased (I'm in the US on the N910C) ,as opposed to the Poland XEO firmware.
Sent from my 6045O using XDA-Developers mobile app
Click to expand...
Click to collapse
XSG is CSC( United Arab Emirated)
Ogfh, than just try on another computer,or different port like i said ...I have no problem with downgrading,may be some1 can help more..sorry

Jovan1997 said:
XSG is CSC( United Arab Emirated)
Ogfh, than just try on another computer,or different port like i said ...I have no problem with downgrading,may be some1 can help more..sorry
Click to expand...
Click to collapse
Thanks for your help , i downloaded the LL(SEE)N910CXXS2CPB3 and it worked

adilplusk said:
Thanks for your help , i downloaded the LL(SEE)N910CXXS2CPB3 and it worked
Click to expand...
Click to collapse
Wow glad to hear that
You can try now poland XEO,but i dont know be careful
#sorry for bad eng

HI all,
what's process of downgrading from 6.0.1 to 5.1.1? Is it just open ODIN, then enter Recovery mode, wipe data/cache, then enter Download mode and just flash the stock 5.1.1 firmware?
What options in Odin should be ticked?

H!
Can Any One Tell Me A Reliable Procedure for Downgrading Note 4 N910C From Stock Marshmallow To Stock Lolli Pop ?

Jovan1997 said:
Wow glad to hear that
You can try now poland XEO,but i dont know be careful
#sorry for bad eng
Click to expand...
Click to collapse
Had the same problem. Polish one worked for me
---------- Post added at 03:27 PM ---------- Previous post was at 03:25 PM ----------
younes_pro said:
H!
Can Any One Tell Me A Reliable Procedure for Downgrading Note 4 N910C From Stock Marshmallow To Stock Lolli Pop ?
Click to expand...
Click to collapse
Download the correct firmware from Sammobile
Step 2 install from Odin on your desktop

tiguy99 said:
Download the correct firmware from Sammobile
Step 2 install from Odin on your desktop
Click to expand...
Click to collapse
Thanks Man !
Downgarded Succesfully
iHave a Question : What is NAnd Erase All in Odin ?

adilplusk said:
Thanks for your help , i downloaded the LL(SEE)N910CXXS2CPB3 and it worked
Click to expand...
Click to collapse
Hi. Can you please explain in details. What is your model no? Is it 910C.
I'm having Note 4 N910C on MM
Build CXXS2DPK4
CSC : N910COJV2DPI1
and would really appreciate the help in downgrading back to lollipop.
Thanks

younes_pro said:
Thanks Man !
Downgarded Succesfully
iHave a Question : What is NAnd Erase All in Odin ?
Click to expand...
Click to collapse
basically wiping all data present.....on flash memory

therohanchawla said:
basically wiping all data present.....on flash memory
Click to expand...
Click to collapse
So How Can I Use It ?
Hoa Can I Flash My Note4 N910C With Nand Erase All ?

younes_pro said:
So How Can I Use It ?
Hoa Can I Flash My Note4 N910C With Nand Erase All ?
Click to expand...
Click to collapse
I'll recommend don't tick that and wipe data using recovery.

petko8680 said:
HI all,
what's process of downgrading from 6.0.1 to 5.1.1? Is it just open ODIN, then enter Recovery mode, wipe data/cache, then enter Download mode and just flash the stock 5.1.1 firmware?
What options in Odin should be ticked?
Click to expand...
Click to collapse
Standard options when flashing. I had downgraded my XEO from MM N910CXXS2DQB8 to LP N910CXXS2CPB3.
Thanks all of you

Like 1 year ago or so .. I tried to down grade but there was a lots of problem and some people write that samsung locked the bootloder or something like that !? Did some thing change !? I have note 4 n910h any one can help with a stuck rom 5.1.1 to down grade to .. some links guys .. and sorry my English not that good.

i wipe data and cache before and after downgrading to Lollipop and it works! Thank you!

Change firmware of Galaxy S7 Edge SM-G935A to have updates with Mexican carrier

Hi guys, i just bought an unlocked SM-G935A galaxy model and it works fine with my Mexican carrier "Telcel" (can receive calls, messages, mobile data) however i notice that i won't have any Samsung and OS updates since this is an AT&T firmware, i have made some research and i believe that i have some options to change the AT&T firmware to another one that might work fine and it should be unlocked and free to get Samsung updates, however i'm not sure which one will work fine and it won't harm my device.
I have found these firmware's that might work fine:
SM-G935U (G935UUES4BQG1)
Sm-G935F (G935FXXU1DQG1)
Does any one have knowledge about this, or have any recommendations?

Exfirexs said:
Hi guys, i just bought an unlocked SM-G935A galaxy model and it works fine with my Mexican carrier "Telcel" (can receive calls, messages, mobile data) however i notice that i won't have any Samsung and OS updates since this is an AT&T firmware, i have made some research and i believe that i have some options to change the AT&T firmware to another one that might work fine and it should be unlocked and free to get Samsung updates, however i'm not sure which one will work fine and it won't harm my device.
I have found these firmware's that might work fine:
SM-G935U (G935UUES4BQG1)
Sm-G935F (G935FXXU1DQG1)
Does any one have knowledge about this, or have any recommendations?
Click to expand...
Click to collapse
Instalale ese SM-G935U (G935UUES4BQG1) , saludos Wey

kArLiN_dRaKE_MX said:
Instalale ese SM-G935U (G935UUES4BQG1) , saludos Wey
Click to expand...
Click to collapse
Gracias man! Lo voy a calar!

Please note the following from the forum rules:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
Click to expand...
Click to collapse
kArLiN_dRaKE_MX said:
Instalale ese SM-G935U (G935UUES4BQG1) , saludos Wey
Click to expand...
Click to collapse
Exfirexs said:
Gracias man! Lo voy a calar!
Click to expand...
Click to collapse

the Doctor said:
Please note the following from the forum rules:
Click to expand...
Click to collapse
I just wanted to say hello to a fellow countryman

kArLiN_dRaKE_MX said:
Instalale ese SM-G935U (G935UUES4BQG1) , saludos Wey
Click to expand...
Click to collapse
I could't flash it, i just tried with odin and it seems to have a type of failure...
ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
I have made some research but i haven't find a pure solution to this.
Do you have any ideas?

Exfirexs said:
I could't flash it, i just tried with odin and it seems to have a type of failure...
ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
I have made some research but i haven't find a pure solution to this.
Do you have any ideas?
Click to expand...
Click to collapse
Search For Odin3+v3.12+(PrinceComsy) and try again

Exfirexs said:
I could't flash it, i just tried with odin and it seems to have a type of failure...
ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
I have made some research but i haven't find a pure solution to this.
Do you have any ideas?
Click to expand...
Click to collapse
Hi! Did you solve it?

jmberumenb said:
Hi! Did you solve it?
Click to expand...
Click to collapse
No dude, i honestly haven't try it, i decided to use it with with the G935A firmware for now, but i 'm reconsidering to change it!
Did you solve it?