I was rooted with an i337M S4 stock, but I reset my flash counter using triangle away then flashed back to stock ROM (therefore removing root) via ODIN, would my flash counter go up again if I flashed a stock ROM via ODIN? I need to return the phone to Samsung for warranty purposes/ There's no real way to check again on the S4 because the flash counter doesn't show in download mode for the S4's.
The flash counter should not go up. Your not doing anything different than Samsung would do to return to stock.
Related
guys,
My I9505 has a hardware problem: the VOL DOWN is unresponsive.
That's a nasty problem, because rebooting the phone gives a lot of problems (warnings about a custom rom, and then nothing works anymore)
So I'd like to return it, but have to restore the phone for warranty.
I managed to flash latest stock MH8.
Here are my questions:
1. before, I've flashed autoroot - does that make the flashcounter go up?
2. before, I've flashed philz recovery - does that make the flashcounter go up?
3. I've flashed the new stock firmware, but still see a clockworkmod folder. can I safely remove that?
4. are there other folders I've to remove to NOT void my warranty?
5. is it necessary/safe to use triangle away on MH8 with the new bootloader?
thanks for any insights!
mailman
mailman123 said:
guys,
My I9505 has a hardware problem: the VOL DOWN is unresponsive.
That's a nasty problem, because rebooting the phone gives a lot of problems (warnings about a custom rom, and then nothing works anymore)
So I'd like to return it, but have to restore the phone for warranty.
I managed to flash latest stock MH8.
Here are my questions:
1. before, I've flashed autoroot - does that make the flashcounter go up?
2. before, I've flashed philz recovery - does that make the flashcounter go up?
3. I've flashed the new stock firmware, but still see a clockworkmod folder. can I safely remove that?
4. are there other folders I've to remove to NOT void my warranty?
5. is it necessary/safe to use triangle away on MH8 with the new bootloader?
thanks for any insights!
mailman
Click to expand...
Click to collapse
Be VERY VERY careful if you're running the new knox firmware that you don't trip the eFuse and change KNOX Warranty void status.
If you have flashed stock firmware MH8 in Odin I would simply do a factory reset in the STOCK recovery and wipe everything that way and send to repair centre.
Do not flash ANYTHING custom or otherwise, even older Stock firmware in Odin.
If you do you will trip the eFuse, your KNOX warranty status will change and you'll be f***ed mate.
Obagleyfreer said:
Be VERY VERY careful if you're running the new knox firmware that you don't trip the eFuse and change KNOX Warranty void status.
If you have flashed stock firmware MH8 in Odin I would simply do a factory reset in the STOCK recovery and wipe everything that way and send to repair centre.
Do not flash ANYTHING custom or otherwise, even older Stock firmware in Odin.
If you do you will trip the eFuse, your KNOX warranty status will change and you'll be f***ed mate.
Click to expand...
Click to collapse
Thanks, that's very good advice. will keep it in mind.
Do you know the answer to my questions about the flashcounter going up by flashing recoveries in stead of custom roms?
thanks,
mailman
Hello Guys,
Let's start with the story :
Old Bootloader, Stock Kernel , PhilZ CMW and Rom XXUDMBA with Chainfire Root.
Then i've installed through CMW the Know Free XXMI1, with Adam Kernel and Modem XXMI1 and still CMW Philz.
Suddenly my phone started to get crazy. Not able to receive calls, pohone freeze , screen blinking etc... Tried with factory and wipe but stucked on S4 logo (not even the samsung one)
Installed, through Odin, the MH8 pre-rooted, Modem MH8, Stock Kernel.
Now i've the new Bootloader, Knox Status stil 0x0, New Modem and New Rom. Everything is working but i've a question.
If i would like to have back the Philz Custom Recovery, flashing with odin, the Knox status will reach 0x1 ?
And why now my device says that my status is modified. I have stock kernel, recovery, rom (just knox free).
and if i would like to update the Rom with a stock one, with knox and all the other s***t, do i need to go necessary through Odin ? because OTA are compromised.
Last question is : Is the wifi-fix mandatory ? i don't know how to know if my wifi has problem. So far seems to work perfectly.
riccardoroma said:
Hello Guys,
Let's start with the story :
Old Bootloader, Stock Kernel , PhilZ CMW and Rom XXUDMBA with Chainfire Root.
Then i've installed through CMW the Know Free XXMI1, with Adam Kernel and Modem XXMI1 and still CMW Philz.
Suddenly my phone started to get crazy. Not able to receive calls, pohone freeze , screen blinking etc... Tried with factory and wipe but stucked on S4 logo (not even the samsung one)
Installed, through Odin, the MH8 pre-rooted, Modem MH8, Stock Kernel.
Now i've the new Bootloader, Knox Status stil 0x0, New Modem and New Rom. Everything is working but i've a question.
If i would like to have back the Philz Custom Recovery, flashing with odin, the Knox status will reach 0x1 ?
And why now my device says that my status is modified. I have stock kernel, recovery, rom (just knox free).
and if i would like to update the Rom with a stock one, with knox and all the other s***t, do i need to go necessary through Odin ? because OTA are compromised.
Last question is : Is the wifi-fix mandatory ? i don't know how to know if my wifi has problem. So far seems to work perfectly.
Click to expand...
Click to collapse
Modified because its pre-rooted...
Flashing anything through ODIN will change the void warranty from 0x0 to 0x1 unless its a stock rom (from MH8 up otherwise you will soft brick)....
You might be able to get rid of the modified status if you flash a totally stock rom but who wants to do that?
So the next question is :
If i would like to flash a new pre-rooted or custom rom i'll void my knox anyway. Because now i have stock recovery and this mean that i can flash only through Kies to a stock Rom right ?
Flashing a custom recovery with Odin (Knox 0x1)
Flashing a stock pre-rooted rom with Odin (Knox 0x1)
Flashing a stock rom newer then mine with kies or Odin (Knox 0x0)
am i right ? so i'm stucked on this ROM in other words, unless i'll just don't care about Knox.
I have an i9505 running stock Android 4.2.2 (JDQ39.I9505XXUBMF8) - rooted using CF-Auto-Root (jflte-jfltexx-gti9505 IIRC). My battery life is poor, and I was hoping that a ROM upgrade to 4.3 would help, but haven't flashed a ROM for a while. I was wondering if anyone could answer the following:
- First of all I guess I need to flash a recovery using Odin? Would Philz Touch Recovery be the best option, or is there a basic, more reliable Recovery mod?
- If I want to retain warranty, would it be best to flash a non-Knox ROM such as Omega v18? (which I believe leaves the original bootloader intact?)
- How can I tell whether or not I need to flash a new modem?
Is there anything else I should be careful/aware of when flashing the Recovery mod and ROM?
itm said:
I have an i9505 running stock Android 4.2.2 (JDQ39.I9505XXUBMF8) - rooted using CF-Auto-Root (jflte-jfltexx-gti9505 IIRC). My battery life is poor, and I was hoping that a ROM upgrade to 4.3 would help, but haven't flashed a ROM for a while. I was wondering if anyone could answer the following:
- First of all I guess I need to flash a recovery using Odin? Would Philz Touch Recovery be the best option, or is there a basic, more reliable Recovery mod?
- If I want to retain warranty, would it be best to flash a non-Knox ROM such as Omega v18? (which I believe leaves the original bootloader intact?)
- How can I tell whether or not I need to flash a new modem?
Is there anything else I should be careful/aware of when flashing the Recovery mod and ROM?
Click to expand...
Click to collapse
1. You can use either Philz recovery or twrp
2. If you want to retain a warranty You need to flash this http://www.androidfilehost.com/?fid=23050663588004454 (Its a 4.2.2 pre-rooted rom) then download Triangle away to reset the binary and sent it for repair incase.
3. If you flash a Custom rom Omega, Golden, Echo, etc. you need to Flash a new 4.3 based modem to fix any data drop issues.
4. Never flash any 4.3 stock firmware from samsung via odin. =Newbootloader = Knox void warranty
Repulsa said:
1. You can use either Philz recovery or twrp
2. If you want to retain a warranty You need to flash this http://www.androidfilehost.com/?fid=23050663588004454 (Its a 4.2.2 pre-rooted rom) then download Triangle away to reset the binary and sent it for repair incase.
3. If you flash a Custom rom Omega, Golden, Echo, etc. you need to Flash a new 4.3 based modem to fix any data drop issues.
4. Never flash any 4.3 stock firmware from samsung via odin. =Newbootloader = Knox void warranty
Click to expand...
Click to collapse
Thanks for that. Do I flash the modem using Odin AFTER flashing the new ROM, or before flashing the ROM?
itm said:
Thanks for that. Do I flash the modem using Odin AFTER flashing the new ROM, or before flashing the ROM?
Click to expand...
Click to collapse
Actually it doesnt matter or you can just flash the modem and then the custom rom you want (Make sure to full wipe when your flashing any rom via recovery )and here's a modem http://www.mediafire.com/download/48r0rgqv25s8968/GSM_Modem_XXUEMFK_and_LTE_Modem_XXUBMH1.rar, download then extract and flash it via odin by selecting phone Make sure to turn of your phone manually before flashing via odin. Once your done check if your baseband version change into MKE . Have a nice day.
Hello all, i need some help returning to stock as i'm out of ideas.
I was using prerooted 4.3 firmware without KNOX files, then i flashed Carbon Rom based on CM. It is not working (as you are not able to remove apps) so i decided to go back to stock (standard stock with KNOX) So i downloaded latest firmware from sammobile and flashed it using Odin.
Just after flash phone reboots than tries to run recovery (and says SECURE FAIL: Recovery). Then it reboots and system is up and running but there is no WiFi,
How can i go to clean and not modified stock firmaware?
What firmware you exactly flash on your device? Same version that comes out the box?
Hello there. So, this is my actual situation: I have a galaxy s4 on stock Lollipop. Due a few issues, I decided to try to downgrade to kitkat I flashed via Odin a stock kk fw, but unluckyly I Haven't considered Knox bootloader, and now the phone stucks in bootloop. I tried to enter recovery, but it doesn't even work.
Is there any way to save it? Actually, I'm downloading stock lollipop firmware to flash it from Odin. Could it work ?
Thanks everyone will give help
Yes, flash the latest stock ROM in Odin to get the phone back to stock.