I have PA 3.99 4.3 jellybean.
zertix said:
I have PA 3.99 4.3 jellybean.
Click to expand...
Click to collapse
Flash a kernel that supports overclocking.
Use a kernel that supports overclocking, such as Faux kernel, Trinity, Neo and etc. After flashing the kernel, use an app to change the frequencies and such. I use tricksters mod + Trinity kernel. Hope this helped
Ok perfect. Anybody can pass me the right kernel for my rom ?
zertix said:
Ok perfect. Anybody can pass me the right kernel for my rom ?
Click to expand...
Click to collapse
there is no right kernel, thats for you to decide. every device will react differently, and you will use your device completely differently than anybody else, so only you will have the right answer. try them all
Related
My nexus 7 is rebooting after a while using trinity kernel. I'm in stock 4.2.1 and I had random reboots even when no it applying any kind of OC just the kernel's default settings! What can I do to prevent that from happening?
Flash a different kernel.
Not all tablets are created equal. Whereas one will play nice with a particular kernel, the very next one off the assembly line may not.
najaboy said:
Flash a different kernel.
Not all tablets are created equal. Whereas one will play nice with a particular kernel, the very next one off the assembly line may not.
Click to expand...
Click to collapse
I flashed motley kernel without any oc and I still get random reboots. Should I go back to stock kernel?
jeff.murillo said:
I flashed motley kernel without any oc and I still get random reboots. Should I go back to stock kernel?
Click to expand...
Click to collapse
i bet its an app causing it.
Don't know why I initially glanced over you being on 4.2.1. Random reboots are actually a known issue with 4.2.x due to a problem at the OS level. Essentially, anything that uses geolocation can inadvertently trigger a reboot. Apps such as HD Widgets have updated to use a workaround until Google themselves fixes the issue. In the meantime, the only certain way to avoid the reboots is to turn off location services or downgrade to 4.1.2.
Unfortunately, this bug isn't consistently reproducible, but it does affect the entire Nexus line of devices using 4.2 and 4.2.1.
najaboy said:
Don't know why I initially glanced over you being on 4.2.1. Random reboots are actually a known issue with 4.2.x due to a problem at the OS level. Essentially, anything that uses geolocation can inadvertently trigger a reboot. Apps such as HD Widgets have updated to use a workaround until Google themselves fixes the issue. In the meantime, the only certain way to avoid the reboots is to turn off location services or downgrade to 4.1.2.
Unfortunately, this bug isn't consistently reproducible, but it does affect the entire Nexus line of devices using 4.2 and 4.2.1.
Click to expand...
Click to collapse
Thanks buddy, with motley kernel I've just had 1 reboot. I'm going to test turning location services off and see what happens. BTW any idea how to oc the GPU in motley kernel? in trickster mod there's no option for it.
jeff.murillo said:
Thanks buddy, with motley kernel I've just had 1 reboot. I'm going to test turning location services off and see what happens. BTW any idea how to oc the GPU in motley kernel? in trickster mod there's no option for it.
Click to expand...
Click to collapse
is ocing the gpu enabled in motley kernel? it has to be a feature of the kernel to be able to do it, an app cant do it if the kernel doesnt include the mod.
simms22 said:
is ocing the gpu enabled in motley kernel? it has to be a feature of the kernel to be able to do it, an app cant do it if the kernel doesnt include the mod.
Click to expand...
Click to collapse
According to the kernels features, it supports GPU oc
jeff.murillo said:
According to the kernels features, it supports GPU oc
Click to expand...
Click to collapse
the kernel might use a different method than the one the app "knows". for an example, cm color control with trinity kernel on the gnex. both cm and trinity have color control enabled, but since cm uses a different method of color control, you cant use the native cm rom color control option with trinity kernel, nor can you use the trinity kernel toolbox to control color on a cm rom/kernel. as they say, theres more than one way to skin a cat.
simms22 said:
the kernel might use a different method than the one the app "knows". for an example, cm color control with trinity kernel on the gnex. both cm and trinity have color control enabled, but since cm uses a different method of color control, you cant use the native cm rom color control option with trinity kernel, nor can you use the trinity kernel toolbox to control color on a cm rom/kernel. as they say, theres more than one way to skin a cat.
Click to expand...
Click to collapse
That's what I thought, any idea how to do it in motley kernel?
jeff.murillo said:
That's what I thought, any idea how to do it in motley kernel?
Click to expand...
Click to collapse
honestly i dont, id assume that motley used francos method since thats the most popular way. you should probably ask in the motley thread. but for some reason, i dont think it does, not the 4.2.1 kernel at least. maybe he just didnt update his op to reflext this. ask in the thread anyways
Hi there,
Im searching for the CM kernel with the ability to undervolt as a kind of add in it?
Is such a kernel available? Can anyone build such a kernel?
Thx
Cm is just stock kernel. Faux made an enhanced stock kernel with undervolt and gamma control http://faux.androidro.ms/mako/mako-jb-enhanced_stock_422_r2.zip
AW: [Req] CM kernel with UV
Michealtbh said:
Cm is just stock kernel. Faux made an enhanced stock kernel with undervolt and gamma control http://faux.androidro.ms/mako/mako-jb-enhanced_stock_422_r2.zip
Click to expand...
Click to collapse
THX, can you also please point me to the thread. Searching via app is a pain.
thebrainkafka said:
THX, can you also please point me to the thread. Searching via app is a pain.
Click to expand...
Click to collapse
Hi,
Here: Faux kernel
AW: [Req] CM kernel with UV
viking37 said:
Hi,
Here: Faux kernel
Click to expand...
Click to collapse
Can you recommend this kernel?
thebrainkafka said:
Can you recommend this kernel?
Click to expand...
Click to collapse
Re,
Yes, maybe, there is a lot of good feedback
But I don't use it so I can't really comment, I just read the thread. You have, like said above an enhanced stock kernel with undervolt and 2 other features, nothing more. And you have the custom kernel with overclock CPU / GPU, you can change vibration, I/O scheduler, TCP congestion, etc...
Read the OP for more informations and give it a try
Michealtbh said:
Cm is just stock kernel. Faux made an enhanced stock kernel with undervolt and gamma control http://faux.androidro.ms/mako/mako-jb-enhanced_stock_422_r2.zip
Click to expand...
Click to collapse
cm kernel is not stock kernel. its a highly modified kernel.
AW: [Req] CM kernel with UV
simms22 said:
cm kernel is not stock kernel. its a highly modified kernel.
Click to expand...
Click to collapse
Is there a simple uv addon for cm kernel. Dont need other stuff...
thebrainkafka said:
Is there a simple uv addon for cm kernel. Dont need other stuff...
Click to expand...
Click to collapse
i dont think they built in the ability to adjust voltage. but, since its open source, anyone can build tbe kernel from cm source and add the ability to change voltages.
simms22 said:
cm kernel is not stock kernel. its a highly modified kernel.
Click to expand...
Click to collapse
Incorrect. CM barely touches the kernel as is, but the MAKO developer (his name escapes me) is even more conservative than that. It is nearly stock.
EvoXOhio said:
Incorrect. CM barely touches the kernel as is, but the MAKO developer (his name escapes me) is even more conservative than that. It is nearly stock.
Click to expand...
Click to collapse
give it time
cm kernels come with everything there is and are often highly modified by the end of a device's life cycle
if this dev is conservative, ok, then it might take longer or until some new kid takes over.
just don't say cm barely touches kernels
Sent from my GT-N7105 using Tapatalk 2
AW: [Req] CM kernel with UV
morfic said:
give it time
cm kernels come with everything there is and are often highly modified by the end of a device's life cycle
if this dev is conservative, ok, then it might take longer or until some new kid takes over.
just don't say cm barely touches kernels
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
Can anyone oft you build a cm kernel with uv?
thebrainkafka said:
Can anyone oft you build a cm kernel with uv?
Click to expand...
Click to collapse
there are many other kernels, better than cm kernel, that offer the ability to adjust voltages. theres trinity kernel, franco kernel, faux..
AW: [Req] CM kernel with UV
simms22 said:
there are many other kernels, better than cm kernel, that offer the ability to adjust voltages. theres trinity kernel, franco kernel, faux..
Click to expand...
Click to collapse
Yes, but the are all overbloated... No slim and simple one.
thebrainkafka said:
Yes, but the are all overbloated... No slim and simple one.
Click to expand...
Click to collapse
Wrong! Try Harsh. It's flash it and leave it. Very good kernel. Highly recommended. Supports UV and uses mpdecision.
thebrainkafka said:
Yes, but the are all overbloated... No slim and simple one.
Click to expand...
Click to collapse
both trinity and franco kernels are also cleaned up so theres no bloating. trinity is one of the least bloated kernels as it doesnt include any of the normal "buzzword" additions, only what is needed, highly optimized, debugging removed, "bull**** free" as it states in its op.
Odp: [Req] CM kernel with UV
Faux got enhanced stock kernel not moded alot. Just some unlocks and fixes. Maybe try this one. Im already on enhanced and its stable plus you got gamma unlocked.
Sent from my Nexus 4 using xda app-developers app
What Kernel is more like the stock?
Faux or Franco?
Thanks.
ergalle2 said:
What Kernel is more like the stock?
Faux or Franco?
Thanks.
Click to expand...
Click to collapse
Both are so far from stock it's not worth answering. Try Harsh kernel.
AW: [Req] CM kernel with UV
estallings15 said:
Both are so far from stock it's not worth answering. Try Harsh kernel.
Click to expand...
Click to collapse
Can you please point me to harsh. Searching in xda APP is a pain.
Which kernels do ppl use for AOSP ROMS? I have obly come across Samsung kernels so far and if I make the jump to AOSP I wanted to make sure I had a selection to choose from!
I'm using and am satisfied with the Chronic Kernel c:
http://forum.xda-developers.com/showthread.php?t=2284252
CountParadox said:
I'm using and am satisfied with the Chronic Kernel c:
http://forum.xda-developers.com/showthread.php?t=2284252
Click to expand...
Click to collapse
Nice one and what ROM do you use with that, will it work with 4.3?
Milamber said:
Nice one and what ROM do you use with that, will it work with 4.3?
Click to expand...
Click to collapse
PACman ROM 4.3 compiled by Vertigo, It says alpha but its pretty damn stable xD
Im also using the latest Phillz Recovery that came out yesterday or so. Compatible with 4.3
>PAC http://forum.xda-developers.com/showthread.php?t=2295673
CountParadox said:
PACman ROM 4.3 compiled by Vertigo, It says alpha but its pretty damn stable xD
Im also using the latest Phillz Recovery that came out yesterday or so. Compatible with 4.3
>PAC http://forum.xda-developers.com/showthread.php?t=2295673
Click to expand...
Click to collapse
I'll try that then! I love CM to be honest
does this also work on a sprint based S4
CountParadox said:
PACman ROM 4.3 compiled by Vertigo, It says alpha but its pretty damn stable xD
Im also using the latest Phillz Recovery that came out yesterday or so. Compatible with 4.3
>PAC http://forum.xda-developers.com/showthread.php?t=2295673
Click to expand...
Click to collapse
I have a S4 model SPH-L720
will that rom allow me to hide my data stream while wifi tethered to laptop from sprint
i'm using the KT-kernel + p.a.c alpha 4.3, pretty stable and nice battery once configured
Milamber said:
Which kernels do ppl use for AOSP ROMS? I have obly come across Samsung kernels so far and if I make the jump to AOSP I wanted to make sure I had a selection to choose from!
Click to expand...
Click to collapse
What's wrong with the stock kernel? Stock CM10.2 is very smooth and fast.
Using KT as I wanted to try UC and UV but it's not smoother or anywthing
Pfeffernuss said:
What's wrong with the stock kernel? Stock CM10.2 is very smooth and fast.
Using KT as I wanted to try UC and UV but it's not smoother or anywthing
Click to expand...
Click to collapse
There is nothing wrong with the stock kernel, I like options...
Pfeffernuss said:
What's wrong with the stock kernel? Stock CM10.2 is very smooth and fast.
Using KT as I wanted to try UC and UV but it's not smoother or anywthing
Click to expand...
Click to collapse
true, cm kernel is pretty smooth, but with others you have a lot of option like more governor , io scheduler ,oc ,uv ecc
kt not smoother? rofl maybe wrong configuration
It seems on pretty much any rom with a custom kernel breaks my camera. When I focus it goes all screwy and crashes. Changing the GPU govenor dosent help. Any ideas how to stop this? Even on JWR with a JWR kernel it happens. Im stuck using stock 4.2.2 with stock kernel because it kills my camera.
bandit97 said:
It seems on pretty much any rom with a custom kernel breaks my camera. When I focus it goes all screwy and crashes. Changing the GPU govenor dosent help. Any ideas how to stop this? Even on JWR with a JWR kernel it happens. Im stuck using stock 4.2.2 with stock kernel because it kills my camera.
Click to expand...
Click to collapse
wait wait! are you using JWR or JSS on a 4.2.2 rom?
update to 4.3 and when you get it now flash a kernel JWR if you are in stock rom if not and you are using Carbon rom, Rasbeanjelly,Cyanogenmod use JSS (JLS now) if you are on Paranoid , PSX , Purity flash JWR kernel then.
this should be fix your problem on camera!
alvin182 said:
wait wait! are you using JWR or JSS on a 4.2.2 rom?
update to 4.3 and when you get it now flash a kernel JWR if you are in stock rom if not and you are using Carbon rom, Rasbeanjelly,Cyanogenmod use JSS (JLS now) if you are on Paranoid , PSX , Purity flash JWR kernel then.
this should be fix your problem on camera!
Click to expand...
Click to collapse
Lol. I know. I was just saying even if I use a kernel written for specifically JWR on JWR it still bug's. Basically any kernel with any rom other than stock breaks my camera. Im aware about the different kernel and rom types.
bandit97 said:
Lol. I know. I was just saying even if I use a kernel written for specifically JWR on JWR it still bug's. Basically any kernel with any rom other than stock breaks my camera. Im aware about the different kernel and rom types.
Click to expand...
Click to collapse
sorry man i understood you were on a 4.2.2 rom sorry.
have you ever made a full flash factory image? maybe you need reset all via userdata .
just try sometimes i do this!
What kernel can I use with PAC? I flashed franco once and it ended up making everything weird.
androidlosernoob said:
What kernel can I use with PAC? I flashed franco once and it ended up making everything weird.
Click to expand...
Click to collapse
Well, first make sure the kernel is built for your Android version.
Pretty much any kernel is compatible with any ROM. That's the magic of the Nexus series.