Ahhhhh I did a wrong KDZ update, L7 instead of L5! Now I have a white screen with lines flickering at the bottom of the screen. When I want to make an USB connection (emergency) then it can`t find the right drivers anymore. New drivers doesn`t work and hard reset neither. Does anybody know a solution or is it end of life for my phone?
DaniR6 said:
Ahhhhh I did a wrong KDZ update, L7 instead of L5! Now I have a white screen with lines flickering at the bottom of the screen. When I want to make an USB connection (emergency) then it can`t find the right drivers anymore. New drivers doesn`t work and hard reset neither. Does anybody know a solution or is it end of life for my phone?
Click to expand...
Click to collapse
you tried download mode ( vol + and - and after plugin the usb which is already connected to pc) witthout battery?
or you have CWM?
Sabyn said:
you tried download mode ( vol + and - and after plugin the usb which is already connected to pc) witthout battery?
or you have CWM?
Click to expand...
Click to collapse
Yes I tried that but after connecting my phone the pc want to install the usb driver over and over again. I do have CWM but can`t get in
DaniR6 said:
Yes I tried that but after connecting my phone the pc want to install the usb driver over and over again. I do have CWM but can`t get in
Click to expand...
Click to collapse
tried vol + and power, after home? try more times, disconect battery first, after put it back
Sabyn said:
tried vol + and power, after home? try more times, disconect battery first, after put it back
Click to expand...
Click to collapse
Doesn`t work at all arghhhh
DaniR6 said:
Yes I tried that but after connecting my phone the pc want to install the usb driver over and over again. I do have CWM but can`t get in
Click to expand...
Click to collapse
You have to have the drives installed before connecting the phone. Maybe try install l7 drivers?
Sent from my LG-E612g using Tapatalk 2
raul338 said:
You have to have the drives installed before connecting the phone. Maybe try install l7 drivers?
Sent from my LG-E612g using Tapatalk 2
Click to expand...
Click to collapse
I did install the drivers before connecting the phone but the pc wants to install the driver again when I connect the phone. It worked fine before and I tried it on an other computer too and had the same problem. Its like the computer wants to connect and install the usb driver and then disconnect and connect again etc. I think my phone is really broken now my own fault
DaniR6 said:
I did install the drivers before connecting the phone but the pc wants to install the driver again when I connect the phone. It worked fine before and I tried it on an other computer too and had the same problem. Its like the computer wants to connect and install the usb driver and then disconnect and connect again etc. I think my phone is really broken now my own fault
Click to expand...
Click to collapse
Try to disconnect from the net while connect the phone Also there is a button to avoid download the drivers
Or you can disable automatic download driver for a moment
raul338 said:
Try to disconnect from the net while connect the phone Also there is a button to avoid download the drivers
Or you can disable automatic download driver for a moment
Click to expand...
Click to collapse
It`s just searching for an USB driver on my computer and not on the internet. And it is like find something but then disconnect. Weird problem but my software is screwed up
DaniR6 said:
It`s just searching for an USB driver on my computer and not on the internet. And it is like find something but then disconnect. Weird problem but my software is screwed up
Click to expand...
Click to collapse
What is trying to install? LG e610 ? or "Unknown device"
Can you get VID and PID ?
Yesssss I fixed it with LG SW tool and a new driver (vodafone) and now Its working again yesssssssssss
Tks all
DaniR6 said:
Yesssss I fixed it with LG SW tool and a new driver (vodafone) and now Its working again yesssssssssss
Tks all
Click to expand...
Click to collapse
what do you mean whit ''new driver''?
anices said:
what do you mean whit ''new driver''?
Click to expand...
Click to collapse
i'd be interested too!
Related
Hi
I Have Samsung Galaxy S.
I Have Installed Paranoid Custom ROM On My Device Now I Need To Flush The Original ROM
But I have Problem : When i connect my phone to pc the phone doesn't show any thing any connection massage and even if i enter the phone in downloading mode the pc and the phone doesn't show show any thing
Please I Need help i can't flash any stock rom please help:crying::crying::crying::crying:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
I forgot to post links
Here will you find Stock Firmwares
http://cur.lv/2j5o
Flash Guide
http://cur.lv/2j5p
Drivers
http://cur.lv/2j5q
Flashprograms
http://cur.lv/2j5r
Service Manuals
http://cur.lv/2j5s
diklooc said:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
Click to expand...
Click to collapse
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Kurre said:
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Syrian Eagle said:
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Click to expand...
Click to collapse
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Syrian Eagle said:
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Click to expand...
Click to collapse
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Lexrsk said:
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Click to expand...
Click to collapse
Ok How Can I Install the ICS/JB Drivers into my phone :crying::crying::crying::crying:
xsenman said:
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Syrian Eagle said:
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Click to expand...
Click to collapse
Every possible reason and solutions that I am aware of, for them are mentioned on that link , you have to try and test each one out, including various Drivers, for you to test...
BUT you keep saying there was no Sign of connection, which means the PC does not say anything (like unknown USB Device) or make a sound and your USB icon does not appear on the phone...am I correct???
That simply means there is NO link, which means, its either your USB cable or USB Port is damaged
alexovy said:
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Sorry nothing get petter still the problem
I can't connect my galaxy y to my pc
USB debugging is ticked
I have latest kies and drivers
other phones can connect (ace)
it only charges my phone whenever i connect.
running jellyblastv3 and it was fine in the past
Yeah I know
Even I have that problem
It connects once in awhile
Flash back to stock rom and check
sent from my katana slicing muffin
uhmm nevermind, fixed already...
What I did is:
connect phone to pc
enter download mode
wait for drivers to install on windows (dafuq)
exit download mode and boot
thanks for the response anyway.
TrojanHorses said:
uhmm nevermind, fixed already...
What I did is:
connect phone to pc
enter download mode
wait for drivers to install on windows (dafuq)
exit download mode and boot
thanks for the response anyway.
Click to expand...
Click to collapse
It works like that?
sent from my katana slicing muffin
TrojanHorses said:
I can't connect my galaxy y to my pc
USB debugging is ticked
I have latest kies and drivers
other phones can connect (ace)
it only charges my phone whenever i connect.
running jellyblastv3 and it was fine in the past
Click to expand...
Click to collapse
Plugging in the USB i a different ought to work. Try this before you go in for more serious options like ODIN.
Try connecting the phone via an USB at the back-panel of your PC.
TrojanHorses said:
uhmm nevermind, fixed already...
What I did is:
connect phone to pc
enter download mode
wait for drivers to install on windows (dafuq)
exit download mode and boot
thanks for the response anyway.
Click to expand...
Click to collapse
did it worked
abhishekr700 said:
did it worked
Click to expand...
Click to collapse
Yes, it worked
In mine, It won't connect anymore , I think something is already damaged inside but charging in the computer and with the wall charger is just normal. My phone acts weird this time, I don't know why
Sean De Jesus said:
In mine, It won't connect anymore , I think something is already damaged inside but charging in the computer and with the wall charger is just normal. My phone acts weird this time, I don't know why
Click to expand...
Click to collapse
You need to re-install the Drivers... Should work :good:
I tried a ROM, and i fail, i can't turn on my phone (s5360), i must back my phone to STOCK ROM with Odin, but USB Device Not Recognized, i installed driver, help me
follow the instructions on my thread
http://forum.xda-developers.com/showthread.php?t=2568853
if you have installed the driver correctly using rear usb ports if on a pc and set your phone to download mode correctly there is no reason why odin will not display com then a number in a coloured box under com:id which shows odin is connected and you have android adb device displayed in device manager
thanks your help but it not work
thanks your help but it not work, :crying: i tried kies, it also not work
gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
Are you boot into download mode already? If not , odin will not recognize your phone anyway
install samsung usb driver first n then connect your phone with download mode by usb
Note:make sure that usb driver is install properly before connect ur phone
.
marcussmith2626 said:
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
Click to expand...
Click to collapse
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
!!
GalKill said:
Are you boot into download mode already? If not , odin will not recognize your phone anyway
Click to expand...
Click to collapse
of course
@@
before that, i installed ROM cm7.2 with Kernel [email protected]#2. but it fail and can't boot. recovery also no
gemnett said:
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
Click to expand...
Click to collapse
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
marcussmith2626 said:
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
Click to expand...
Click to collapse
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
gemnett said:
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
Click to expand...
Click to collapse
right click the device
click uninstall
restart the pc
then put phone into download mode
connect usb
push vol up on phone to start connection
drivers should then install
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
DiwatangTboom said:
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
Click to expand...
Click to collapse
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
gemnett said:
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
Click to expand...
Click to collapse
Yep.
Hey guys im trying to back to a fresh stock rom. (VS980)I downloaded all the necessary files, drivers, lgflash tools etc etc. however my computer still cannot recognize my phone. under ports there is not an ANDROID port for my phone. (since we need to change it to COM41)
any ideas or suggestions?
daimonmustdie said:
Hey guys im trying to back to a fresh stock rom. (VS980)I downloaded all the necessary files, drivers, lgflash tools etc etc. however my computer still cannot recognize my phone. under ports there is not an ANDROID port for my phone. (since we need to change it to COM41)
any ideas or suggestions?
Click to expand...
Click to collapse
what comp/ operating system are you on?
plug directly into the computer, not a hub.
Gabriel51 said:
what comp/ operating system are you on?
plug directly into the computer, not a hub.
Click to expand...
Click to collapse
its a pc, wins7 64 bit
daimonmustdie said:
its a pc, wins7 64 bit
Click to expand...
Click to collapse
Do you find it in the device manager?
Gabriel51 said:
Do you find it in the device manager?
Click to expand...
Click to collapse
it shows up when its showing the LG logo, but when its on download mode, its blank.
daimonmustdie said:
it shows up when its showing the LG logo, but when its on download mode, its blank.
Click to expand...
Click to collapse
When it's in the download mode it may show up in a different location in the device manager and be listed only as "android".
Do you hear any sound from the computer when you plug it in when in download mode?
What does your download screen look like?
Once these questions are answered, there may be a solution. Hopefully a CDMA device won't be different
Gabriel51 said:
When it's in the download mode it may show up in a different location in the device manager and be listed only as "android".
Do you hear any sound from the computer when you plug it in when in download mode?
What does your download screen look like?
Once these questions are answered, there may be a solution. Hopefully a CDMA device won't be different
Click to expand...
Click to collapse
Hi i just got my phone back from a cell phone repair shop, they had no luck either.
to answers your questions:
i hear no sound from the computer when i plug it in to turn on download mode.
my download screen says Firmware Update on top, "do not unplug the USB connecton...." 0%. in the bottom it says b17 and ROOTED in red.
daimonmustdie said:
Hi i just got my phone back from a cell phone repair shop, they had no luck either.
to answers your questions:
i hear no sound from the computer when i plug it in to turn on download mode.
my download screen says Firmware Update on top, "do not unplug the USB connecton...." 0%. in the bottom it says b17 and ROOTED in red.
Click to expand...
Click to collapse
there are two possibilities.. First, your phone is already hard bricked.. second is, your battery is absolutely dead with no power left...
Well, Have you tried to check the battery itself?
Rei Zazie said:
there are two possibilities.. First, your phone is already hard bricked.. second is, your battery is absolutely dead with no power left...
Well, Have you tried to check the battery itself?
Click to expand...
Click to collapse
hmmmm hardbricked? i can get into download mode and stock recovery. I messed around with adb sideload last night trying to flash a custom recovery but it kept saying installation aborted on the phone. i even tried adb push but it keeps saying error:closed in the cmd prompt.
how can i check the battery? its non removeable.
thanks for helping, any ideas is appreciated!
daimonmustdie said:
hmmmm hardbricked? i can get into download mode and stock recovery. I messed around with adb sideload last night trying to flash a custom recovery but it kept saying installation aborted on the phone. i even tried adb push but it keeps saying error:closed in the cmd prompt.
how can i check the battery? its non removeable.
thanks for helping, any ideas is appreciated!
Click to expand...
Click to collapse
ok, so have you tried it using different PC or laptop?
(last option if nothing else to try) if you want to check the battery :
DIY remove the case ( there are several tutorials in youtube, but of course, do it with your own risk)
daimonmustdie said:
Hi i just got my phone back from a cell phone repair shop, they had no luck either.
to answers your questions:
i hear no sound from the computer when i plug it in to turn on download mode.
my download screen says Firmware Update on top, "do not unplug the USB connecton...." 0%. in the bottom it says b17 and ROOTED in red.
Click to expand...
Click to collapse
It's not hard bricked/
Getting into download mode proves this.
You must get your computer to recognize your device in order to communicate with it. So I would not consider anything else until that is accomplished. PERIOD!
1. Are you using a USB 2.0 port? usb 3.0 will not work a lot of the time. (Important)
2. Have you tried another usb cable?
3. I think we discussed the drivers, I have them if needed
What operating system are you using?
If nothing here helps we can we can use "TeamViewer 9" which will give me control of your computer to help resolve this issue...
Gabriel51 said:
It's not hard bricked/
Getting into download mode proves this.
You must get your computer to recognize your device in order to communicate with it. So I would not consider anything else until that is accomplished. PERIOD!
1. Are you using a USB 2.0 port? usb 3.0 will not work a lot of the time. (Important)
2. Have you tried another usb cable?
3. I think we discussed the drivers, I have them if needed
What operating system are you using?
If nothing here helps we can we can use "TeamViewer 9" which will give me control of your computer to help resolve this issue...
Click to expand...
Click to collapse
when i turn on my phone, and the LG logo is on the screen, my computer recognizes the phone, it will say LGE androidnet...but when i go to download mode the computer will not recognize. its weird
1. 2.0 ports
2. ive been trying the original LG cable and a motorola cable. no success
3. as for drivers. installed as of now are the LG verizon united driver 2.14.1 and LG united mobile driver 3.12.3.0
4. win 7 64 bit
daimonmustdie said:
when i turn on my phone, and the LG logo is on the screen, my computer recognizes the phone, it will say LGE androidnet...but when i go to download mode the computer will not recognize. its weird
1. 2.0 ports
2. ive been trying the original LG cable and a motorola cable. no success
3. as for drivers. installed as of now are the LG verizon united driver 2.14.1 and LG united mobile driver 3.12.3.0
4. win 7 64 bit
Click to expand...
Click to collapse
That is weird
will it go into recovery?
Gabriel51 said:
That is weird
will it go into recovery?
Click to expand...
Click to collapse
stock recovery.
daimonmustdie said:
stock recovery.
Click to expand...
Click to collapse
Will it boot into recovery?
Gabriel51 said:
Will it boot into recovery?
Click to expand...
Click to collapse
yes it will
daimonmustdie said:
yes it will
Click to expand...
Click to collapse
can you do a factory reset from there? I sold my g2 so i can't check for myself
Gabriel51 said:
can you do a factory reset from there? I sold my g2 so i can't check for myself
Click to expand...
Click to collapse
yes i can
daimonmustdie said:
yes i can
Click to expand...
Click to collapse
what happens when you do a factory reset?
Gabriel51 said:
what happens when you do a factory reset?
Click to expand...
Click to collapse
nothing, it reboots and the LG logo appears and thats it..no O.S.
Hi there everyone !
I have a Galaxy S4 GT-i9505 and it stopped connecting MTP via USB nso I tried out a "Wipe Cache" in Recovery
and the phone restarted it shows a note "System UI Stopped" and the phone keep in a black screen !!!
Please, somebody help me this phone is not totaly mine, it's from the company I work in :/
I can't even try a Stock Rom because the phone isn't being reconised by Windows
(yes I have all drivers installed and updated)
Thanks in advance !
Someone help me Please! I'm desperated !
I'm new around here so I'm sorry if I posted something that someone already did .
Have you tried using different USB cables and USB ports?
Yes!
audit13 said:
Have you tried using different USB cables and USB ports?
Click to expand...
Click to collapse
Yes I did, but nothing happens for while
once I saw something like that but with my old one a Lenovo K900, but the lenovo was still recognised by Windows so I had how to flash the room back :|
So there is no device that appears in device manager? Have you installed Kies or SmartSwitch?
Yes!
audit13 said:
So there is no device that appears in device manager? Have you installed Kies or SmartSwitch?
Click to expand...
Click to collapse
Yes I did, but only Kies, the second one I didn't know, gonna try it out now !
Done!
felipemichelr said:
Yes I did, but only Kies, the second one I didn't know, gonna try it out now !
Click to expand...
Click to collapse
Done that too and still with the same problema ... no Device on DeviceManager or even a sound noticing that I've connect the phone on both devices (Computer and Smartphone)
sad...
Was the phone detected before?
In what state (On, Off, Recovery, Download Mode) was the phone when you tried to connect it?
yes It used to be detected before :|
GDReaper said:
In what state (On, Off, Recovery, Download Mode) was the phone when you tried to connect it?
Click to expand...
Click to collapse
All of that, when I connect with the phone on/off it just charges ... When it's on Download mode or recovery nothing happens