SHOstock update 2.2 error - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

I don't have the privileges to post this on the SHOStock thread so I had to post it here and hope I get the answer I need. I browsed and searched that thread to no avail.
I installed ShoStock 2.0 via TWRP without any issues but as soon as I install the 2.2 update I get stuck at the Samsung splash screen. I've done it a few times and just can't get the update to run. I've tried fixing permissions and from a factory reset and full wipe.
I have the AT&T S4 i337. Thanks

are you wiping everything before you flash the 2.2 update? you should just dirty flash the update over 2.0. the only thing you wipe is cache & dalvik first.
if thats what you're doing, i suggest re-downloading the update and flashing over 2.0 again.

Also, are you flashing a loki'd kernel after flashing the update?
It does seem like you just got a bad download, though. Try a new download.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

2.2 is just as it says, an update. It does NOT have all the same files in it. 1. Make sure to download it and check the MD5 of of the 2.0 Comolete rom and the MD5 of the 2.2 update. Once you have confirmed that then flash 2.0 in recovery, let it boit up completely. Then go back into recovery and WITHOUT wiping ANYTHING flash the 2.2 update.
Sent From My Spiderman Themed I337

graydiggy said:
Also, are you flashing a loki'd kernel after flashing the update?
It does seem like you just got a bad download, though. Try a new download.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I am trying a new download now, I don't know how I'd get a bad download though. I don't know what a loki'd kernel is... :/

Bad downloads happen.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

Related

Bloat files needed

Strange question... Can someone please post the apk and odex file, if there is one, for the stock Razr M Swype app? I appreciate it!!
Also if you have all the other Verizon bloat apps with their odex Files I need those please. The reason for this is the system dump that was posted last week does not work for me and I cannot update my phone with the official OTA or the official OTA leak file. Thank you so much!
Sent from my XT907 using xda app-developers app
Sent from my XT907 using xda app-developers app
Please help me...
Sent from my XT907 using xda app-developers app
I presume you want these because you're trying to update to the JB OTA and you are rooted and uninstalled somethings using TiBu. Which means now the JB OTA fails when you try to flash it. Wouldn't be easier to do the following?
SBF back to ICS
Flash the JB OTA
Re-root
Freeze the bloat (and whatever else you'd like)
This way you get a fresh install of the JB OTA. I may be wrong in my assessment of what you're trying to do here. But if I'm correct, the above steps seem like the easiest way to solve your problem.
hokieputter said:
I presume you want these because you're trying to update to the JB OTA and you are rooted and uninstalled somethings using TiBu. Which means now the JB OTA fails when you try to flash it. Wouldn't be easier to do the following?
SBF back to ICS
Flash the JB OTA
Re-root
Freeze the bloat (and whatever else you'd like)
This way you get a fresh install of the JB OTA. I may be wrong in my assessment of what you're trying to do here. But if I'm correct, the above steps seem like the easiest way to solve your problem.
Click to expand...
Click to collapse
Yes I've already tried that and it will not let me install anything. Even when the official update alerted my phone it downloaded but will not install.
Sent from my XT907 using xda app-developers app
alwaysbelieve1 said:
Yes I've already tried that and it will not let me install anything. Even when the official update alerted my phone it downloaded but will not install.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Hmm. That's strange. Have you tried doing a factory data reset (settings->privacy->factory data reset)? Do this while running the stock ICS, before trying to flash the JB OTA.
hokieputter said:
Hmm. That's strange. Have you tried doing a factory data reset (settings->privacy->factory data reset)? Do this while running the stock ICS, before trying to flash the JB OTA.
Click to expand...
Click to collapse
Yes i have an still no luck. I'm very perplexed.
Sent from my XT907 using xda app-developers app
I have tried everything... replacing all the system apps, factory resetting, and I cannot flash the OTA when my phone downloads it straight from Verizon or official OTA ROM when attempting from recovery. I am at a loss. Can anyone help me please?

Question about the last OTA

I was wondering if a new method to install the last OTA was out. I didnt feel comfortable doing the methods I saw before. Like doing a backup then going stock then reinstalling root. Im hoping there is a apk file and only needing to install that and be done. I looked and couldnt find anything but that is probably my fault. Lol
Sent from your moms room
byebyev8 said:
I was wondering if a new method to install the last OTA was out. I didnt feel comfortable doing the methods I saw before. Like doing a backup then going stock then reinstalling root. Im hoping there is a apk file and only needing to install that and be done. I looked and couldnt find anything but that is probably my fault. Lol
Sent from your moms room
Click to expand...
Click to collapse
Easiest way is to download the firmware from here http://forum.xda-developers.com/showthread.php?p=43418277 then download the app mobile odin from the play store. Then use the app to flash the tar file and then you are on the mf9 baseband and firmware. Then flash the mf9 rom and you have the entire OTA update.
Sent from my SPH-L720 using xda premium
Seriously? If you are rooted. Just flash mf9 stock rooted ROM.
Sent from my SPH-L720 using Tapatalk 4
Like windows, the best way is to do a full install and not an upgrade. Use PC Odin to flash the official full mf9 md5 tar. Reroot it. PC Odin seems to do a more thorough job than mobile Odin pro app. IMO, back up everything then do a full flash. The file is like 2.2gb. Yes that patch upgrade might work but you will have better performance and less problems if you do a full install tar.md5. I haven't messed with the full zip cwm flash, so I can't vouch for it. I have done what I explained and noticed better performance than just taking the update file. Yes it's more work but I, and a few other people, agree it's worth the extra time spent. Titanium backup can help speed things up, but doing the full job is better IMO.
Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
daniel4653 said:
Seriously? If you are rooted. Just flash mf9 stock rooted ROM.
Sent from my SPH-L720 using Tapatalk 4
Click to expand...
Click to collapse
Flashing the rom does not give you the modem/firmware.
Sent from my SPH-L720 using xda premium
wotandsdwys said:
Flashing the rom does not give you the modem/firmware.
Sent from my SPH-L720 using xda premium
Click to expand...
Click to collapse
Bet he was referring to this method or similar: http://forum.xda-developers.com/showthread.php?t=2357471
Which IMO the steps listed by crawrj in post #2 is still the easiest/fastest way to get to stock rooted MF9. But to each his own.
Yeah, I was ready on the mf9 rom, so just downloaded the firmware tar and used mobile odin for that. Haven't noticed any performance issues or anything, although I have nothing to compare it to other than different roms.
Sent from my SPH-L720 using xda premium
Ok. Here is what I have done and where I am at. First off I consider myself a noob. I am rooted with odex. I used the method from qbking77. My build was mdl on both lines under about phone. No issues there at all.
So last night I downloaded the MF9 zip file. Not the ones from craw. I used oden. I had to update the one file in note pad. I then put the MF9 file in the pda field on odin and installed. It installed and said passed. Now under about phone the build says MF9 and the other is mdl. No biggie there. Now the new rom is not taking. Im getting the stupid knox message and will delete that. My wifi is not working. I did read that a guy flashes the new rom and kernel and everything was fine. I go into twrp to flash the rom but cannot find it. I am assuming it starts off with mf9 in file name. This is where I need help and that help dumbed down for me. I just want the app to sd and the camera update.
Sent from my SPH-L720 using xda app-developers app
To get WiFi to work you just need to.flash a new kernel. Go with agat or ktoonz. You need to be on MF9 based ROM to have the apps to SD and the camera update.
To update your baseband you need to flash the update modem zip. I'll try to get you a link.
Sent from my SPH-L720 using Tapatalk 4
The mf9 does show but it isnt what is running. It did load once last night but everything of mine was gone and I kinda freaked out and reloaded a backup.
Sent from my SPH-L720 using xda app-developers app
byebyev8 said:
The mf9 does show but it isnt what is running. It did load once last night but everything of mine was gone and I kinda freaked out and reloaded a backup.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I'm not entirely sure what you're asking here.
Sent from my SPH-L720 using xda premium
I've had bad luck with every custom kernel. Some, after flashing, the phone heats up and won't cool down. All of them seem to make my keyboard flip out.
For using Mobile Odin pro, it finished the flash much faster than PC Odin, so I wonder if it did everything properly. With my previous phone, e4gt, it wouldn't flash modems. I don't know if it works or not with this phone. I haven't tested. Tested meaning purposely flash a md5 with a different baseband to see if it actually changed it.
Let me see if I can say this better cause I am a noob. I am running odex rooted. Basically stock. I want MF9. I installed MF9 and it shows that under about device. Now when the phone boots it is still running 4.2. 4.3 is not running. When i finally got 4.3 to run all my apps and everything was gone. I freak out and installed a backup so now im back to 4.2. Now on 4.2 and 4.3 my wifi is not working. So what I need help with is getting 4.3 to run and my wifi to work.
byebyev8 said:
Let me see if I can say this better cause I am a noob. I am running odex rooted. Basically stock. I want MF9. I installed MF9 and it shows that under about device. Now when the phone boots it is still running 4.2. 4.3 is not running. When i finally got 4.3 to run all my apps and everything was gone. I freak out and installed a backup so now im back to 4.2. Now on 4.2 and 4.3 my wifi is not working. So what I need help with is getting 4.3 to run and my wifi to work.
Click to expand...
Click to collapse
What the heck are you talking about? 4.2.2 is the only software available for the Sprint S4. The MF9 update does not update your android version to 4.3. It is just a service update to touch wiz to improve performance and add some features. 4.3 android is a work in progress on our phones and not 100% functioning.
Sent from my icrap 2 using Tapatalk HD
cruise350 said:
What the heck are you talking about? 4.2.2 is the only software available for the Sprint S4. The MF9 update does not update your android version to 4.3. It is just a service update to touch wiz to improve performance and add some features. 4.3 android is a work in progress on our phones and not 100% functioning.
Sent from my icrap 2 using Tapatalk HD
Click to expand...
Click to collapse
What he said. What specific rom are you trying to install? If it's Touchwiz, it'll only be 4.2.2. Which recovery are you using?
Sent from my SPH-L720 using xda premium
I was only trying to uae that as a exaample but didnt say so. I know there is no 4.3. I should have added that. My fault
Sent from my SPH-L720 using xda app-developers app
I used qbking77 root method. I only used odex and twrp. I havent installed any other roms. Under device info its MF9 and MDL. Sorry I confused this issue with my noobness.
Sent from my SPH-L720 using xda app-developers app
continued
http://forum.xda-developers.com/showthread.php?p=43418277
This is the method I used to install MF9. I really need some help!
Use this, not the one you posted. That'll confuse you if you're new. http://forum.xda-developers.com/showthread.php?t=2375523
Official MF9 tar is up~!
Use this to root. http://forum.xda-developers.com/showthread.php?t=2291827
[SPH-L720] CF-Auto-Root
Sorry, I'm doing all this copy paste on the phone.

[Q] Can't run custom rom

Alright ive kinda hit a wall im not sure what i can do i can't seem to get my s4 to flash to any custom roms. just picked it up it came with the latest MF9, ive followed the instructions http://forum.xda-developers.com/showthread.php?t=2257101 to get root access and to install twrp. i can get it all to install just fine and have verified that i have root access. but once i flash a custom rom ie. CM 10.1 or even Slim mod either through goomanager it will say it installs successfully but once it reboots the new rom splash screen shows up and just sits there forever spinning and it never goes any further.
ive even restored my device to factory and unrooted the device and im still unable to get any roms to load up. am i missing anything that someone might be able to point out
heres the steps ive tried or gone thru
1. CF-autoroot via odin
2. install Twrp or CWM either thru odin or their manager aps
3. copy rom and gapps to sd card
4. boot to recovery and try to install
5. get stuck at splash screen!!!!
You probably need to install a compatible kernel. If the Rom doesn't include one that's the problem.
Sent from my SPH-L720 using Tapatalk 4
countervirus said:
Alright ive kinda hit a wall im not sure what i can do i can't seem to get my s4 to flash to any custom roms. just picked it up it came with the latest MF9, ive followed the instructions http://forum.xda-developers.com/showthread.php?t=2257101 to get root access and to install twrp. i can get it all to install just fine and have verified that i have root access. but once i flash a custom rom ie. CM 10.1 or even Slim mod either through goomanager it will say it installs successfully but once it reboots the new rom splash screen shows up and just sits there forever spinning and it never goes any further.
ive even restored my device to factory and unrooted the device and im still unable to get any roms to load up. am i missing anything that someone might be able to point out
heres the steps ive tried or gone thru
1. CF-autoroot via odin
2. install Twrp or CWM either thru odin or their manager aps
3. copy rom and gapps to sd card
4. boot to recovery and try to install
5. get stuck at splash screen!!!!
Click to expand...
Click to collapse
Did you factory reset after flashing?
Sent from my SPH-L720 using xda premium
nicotheandroidguy said:
Did you factory reset after flashing?
Sent from my SPH-L720 using xda premium
Click to expand...
Click to collapse
yes i did just to give a clean start and try again
countervirus said:
yes i did just to give a clean start and try again
Click to expand...
Click to collapse
Install twrp recovery 2.5.0.2! 2.6 seems to have been buggy, btw are you downloading it from computer or from your phone?
Sent from my SPH-L720 using xda app-developers app
countervirus said:
yes i did just to give a clean start and try again
Click to expand...
Click to collapse
If you want a good aosp rom try this one http://forum.xda-developers.com/showthread.php?p=43120823 it is very stable and awsome except there aren't much customization options update your recovery first then wipe data, system, and cache then flash the rom. Use this as a backup rom http://forum.xda-developers.com/showthread.php?t=2357471
Sent from my SPH-L720 using xda premium
nicotheandroidguy said:
If you want a good aosp rom try this one http://forum.xda-developers.com/showthread.php?p=43120823 it is very stable and awsome except there aren't much customization options update your recovery first then wipe data, system, and cache then flash the rom. Use this as a backup rom http://forum.xda-developers.com/showthread.php?t=2357471
Sent from my SPH-L720 using xda premium
Click to expand...
Click to collapse
Btw the way the GE isnt aosp, its touchwiz based.
Sent from my SPH-L720 using xda app-developers app
ROMANTiC KiD said:
Install twrp recovery 2.5.0.2! 2.6 seems to have been buggy, btw are you downloading it from computer or from your phone?
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Thanks!!! this actually worked dropped back to 2.5.0.2 and it loaded up on the first rom!!
ROMANTiC KiD said:
Btw the way the GE isnt aosp, its touchwiz based.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I know but it is the stablest AOSP like rom for our device.
Sent from my SPH-L720 using xda premium
countervirus said:
Thanks!!! this actually worked dropped back to 2.5.0.2 and it loaded up on the first rom!!
Click to expand...
Click to collapse
Good to hear it worked
Sent from my SPH-L720 using xda app-developers app

Cyanogen mod for i9505

Installed many times always stuck on bootloop. File is only ever 200mb so im guessing im trying to install an update on its own. Any links and advice please
Sent from my GT-I9505 using xda app-developers app
nazzy90 said:
Installed many times always stuck on bootloop. File is only ever 200mb so im guessing im trying to install an update on its own. Any links and advice please
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
yeah same here dude can't install any CM based roms on my i9505 international it just doesnt boot...
but its fine with Google Edition roms and stock though
I used foxhound rom for a few months then i wanted that stock feel so use omega rom now but cant get 3minit framework to work on the mh6 build. Cant download v10 again of omega either can only fond v11. I suggest omega rom to u
Sent from my GT-I9505 using xda app-developers app
Do you guys factory reset after flashing CM?
The best way to install is to flash Official CWM recovery from their website (Google Clockworkmod), download .img file and flash with SGS4 FLASHER from Play Store.
Boot to recovery
Go to mounts and storage
format system, data, cache. (make sure you've done a backup of current ROM before doing ths)
Then flash CyanogenMod ROM
Then factory reset
Then reboot
You should be fine
If you get stuck on splash screen it's cool, Just hold power down and try again. You may need to keep doing this till you see CyanogenMod boot animation. I've had to do it 4 times before it would finally boot. It's normal though just something weird with CM10.2 kernel. If you flash a custom kernel it boots fine everytime
Sent from my GT-I9505 using XDA Premium HD app
Yeah i always factory reset before a fresh install of a rom. So the file is actually 200mb then? Seems a bit strange to me.
Sent from my GT-I9505 using xda app-developers app
I never had problems installing CM.
I have Phil CWM.
I used the option to wipe for a clean install from the CWM and then installed the zip and after that reboot.
I am on cm 10.1.3 RC2 and all is good
I use phil cwm !! I try all the possible ways to format stuff im flashing roms about 4 years now and know how to flash them... But this CM10.2 just doesnt work for me !! I even used twrp but just doesnt work... Once this thing came afater flashin , it was updating apps and after that got stock on starting apps
Sent from my GT-I9505G using XDA Premium 4 mobile app
So it is a 200mb file?
Sent from my GT-I9505 using XDA Premium 4 mobile app
same here, i'm installing cm11 and bootloop always, what do please??

Status 7 error Help

Hey Guys,
i need some help,
i am currently on slim kat 4.4.2 rom, but im trying to flash the new miui 4.2.14 build but that rom is 4.2.2 i believe, and i get status 7 error while trying to clean flash it through latest philz touch recovery,
how can i fix this to be able to flash the miui 4.2.2 rom??
thanks!
Did you check to see if MD5 matches? File might be corrupt.
Sent from my SPH-L720 using Tapatalk
cris_epic said:
Hey Guys,
i need some help,
i am currently on slim kat 4.4.2 rom, but im trying to flash the new miui 4.2.14 build but that rom is 4.2.2 i believe, and i get status 7 error while trying to clean flash it through latest philz touch recovery,
how can i fix this to be able to flash the miui 4.2.2 rom??
thanks!
Click to expand...
Click to collapse
Yeah it's a good download, this always happens when I'm trying to flash a jellybean ROM can it be because I'm on mk2?
Sent from my SPH-L720 using xda app-developers app
daniel4653 said:
Did you check to see if MD5 matches? File might be corrupt.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Yeah it's a good download, this always happens when I'm trying to flash a jellybean ROM can it be because I'm on mk2?
Sent from my SPH-L720 using xda app-developers app
cris_epic said:
Yeah it's a good download, this always happens when I'm trying to flash a jellybean ROM can it be because I'm on mk2?
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Go to Philz thread for your phone.. In the FAQ he tells us how to get past that. It has to do with the updater script and alls you have to do is uncheck the option in recovery that says something like... Use old updater script... Something to that effect. Again read his FAQ and you'll see what I'm talking about.
I had the same thing happening with my phone just a few days ago and that fixes it.
Sent From My Verizon S4

Categories

Resources