Related
I am not responsible if you mess up your phone.
Tested to work on:
CM 10.1.1 - v6.0 coldblue_
Mokee 42.2RC4 (MoonLightV1.3.133q, MoonLightV1.3.135b, MoonLightV1.3.136)
Attention! After install fix at MoonLightV1.3.133q is necessary to do a wipe data/factory reset.
Testing for image sharing, so that does not guarantee full service.
Bluetooth works for me at CyanogenMod 10.1 version 12 by ilyaaa299. Only do not know how to fix
Thank to jegr6 for coldblue_BT and inspiration.
Thanks ( díky)
scux said:
I am not responsible if you mess up your phone.
Tested to work on:
CM 10.1.1 - v6.0 coldblue_
Mokee 42.2RC4 (MoonLightV1.3.133q, MoonLightV1.3.135b)
Attention! After install fix at MoonLightV1.3.133q is necessary to do a wipe data/factory reset.
Testing for image sharing, so that does not guarantee full service.
Bluetooth works for me at CyanogenMod 10.1 version 12 by ilyaaa299. Only do not know how to fix
Click to expand...
Click to collapse
Could not open zip file. It could be damaged. Coud you please upload it again?
Thanks
thanks.
it worked for me!!!
RBwai said:
Could not open zip file. It could be damaged. Coud you please upload it again?
Thanks
Click to expand...
Click to collapse
Re-upload: http://d-h.st/ofx
Ax1qwer said:
Re-upload: http://d-h.st/ofx
Click to expand...
Click to collapse
I used MoonLightV1.3.136 and It work's. With FM radio this ROM would be almost perfect - very stable and smooth.
Thank's to all developers!
looking forward to the camera!
Sent from my U8800 using xda app-developers app
just tested this fix in Mokee rom and didn't work.
Bluetooth turns on but can't see or be seen by other devices.
What I did:
- Installed Mokee
- reboot and follow the android setup
- then went to CWM again and flashed the fix
- after flash I did wipe data/factory reset and reboot.
Did I do something wrong?
---------- Post added at 12:22 PM ---------- Previous post was at 12:10 PM ----------
just tested this fix also in Coldblue CM10_V6 rom and didn't work either
Again, BT turns on but can't see or be seen by other devices.
What I did:
- Installed CM10_V6
- reboot and follow the android setup
- then went to CWM again and flashed the fix and rebooted
Am I doing something wrong or the phones where this fix did worked have something special that mines doesn't?
Several times on and off bluetooth. Turn visibility on all devices.
scux said:
Several times on and off bluetooth. Turn visibility on all devices.
Click to expand...
Click to collapse
really??? :laugh:
don't work....
scux said:
Several times on and off bluetooth. Turn visibility on all devices.
Click to expand...
Click to collapse
+1
Djuganight said:
just tested this fix in Mokee rom and didn't work.
Bluetooth turns on but can't see or be seen by other devices.
What I did:
- Installed Mokee
- reboot and follow the android setup
- then went to CWM again and flashed the fix
- after flash I did wipe data/factory reset and reboot.
Did I do something wrong?
---------- Post added at 12:22 PM ---------- Previous post was at 12:10 PM ----------
just tested this fix also in Coldblue CM10_V6 rom and didn't work either
Again, BT turns on but can't see or be seen by other devices.
What I did:
- Installed CM10_V6
- reboot and follow the android setup
- then went to CWM again and flashed the fix and rebooted
Am I doing something wrong or the phones where this fix did worked have something special that mines doesn't?
Click to expand...
Click to collapse
Works your bluetooth at coldblue_BT rom?
scux said:
Works your bluetooth at coldblue_BT rom?
Click to expand...
Click to collapse
it does turns on, but doesn't find any devices nor any device find the phone.
Resuming, doesn't work.
scux said:
Works your bluetooth at coldblue_BT rom?
Click to expand...
Click to collapse
It does work but not always. I can play music through a blue tooth speaker. But I can't connect to my tablet. Ergo: It might work on your device ...
Hello,
first: Sorry for opening a new Thread. I think it should be placed into the ROM's developing Thread, but I cannot because I've less than 10 posts and it's an developer Thread or sth like that.
I've Installed the newest (2014-01-24) Nightly. Since the one from 20-Jan-2014 I cannot open "Springfield: Tapped Out". It force close right before the loading screen should appear. All other apps (as far as I know) are still working fine. I'll attach a log-file of the start-sequence.
Does anybody has an idea how I can solve this? Is it because of the zRAM-feature that is enabled right from the 20th Jan build by default?
#SplashmasterBee
hello, i have no answer to your question. But I wanted to ask if CM11 is runs better than CM7.2 ?
I'm still on 7.2, it's quite stable, but it's quite old.
I can't remember if i had cm7.2 installed in my phone, but cm11 runs really smooth. And till the 20th Jan nightly i had no problems, too.
SplashmasterBee said:
Does anybody has an idea how I can solve this? Is it because of the zRAM-feature that is enabled right from the 20th Jan build by default?
#SplashmasterBee
Click to expand...
Click to collapse
Maybe try to reinstall app and wipe cashe/dalvik.
---------- Post added at 05:30 PM ---------- Previous post was at 05:26 PM ----------
Isukthar said:
But I wanted to ask if CM11 is runs better than CM7.2 ?
I'm still on 7.2, it's quite stable, but it's quite old.
Click to expand...
Click to collapse
The speed as for me is the same. Better are the new interface features, worse is stability (but I hope it will be correct soon).
[email protected] said:
Maybe try to reinstall app and wipe cashe/dalvik.
Click to expand...
Click to collapse
I've already tried that, did a clean install from sbf.
Both doesn't help...
How can I (de-)activate zRam option. I'd like to try out if it works then...
Sent from my MB526 using XDA Premium 4 mobile app
[email protected] said:
Maybe try to reinstall app and wipe cashe/dalvik.
Click to expand...
Click to collapse
I've alredy tried it several times. I made an install from sbf, too ('cause system didn't boot anymore, but I think it was a problem with the incremental update), but it just don't work. Deleted the whole data of the app. Still the same...
In my opinion it could be caused by zRAM (enabled by default since 20th Jan build). I've tried to copy the ovcerclock_defy.ko like Quarx described, but it didn't help (I don't know if it worked so far...).
I'll try a newer build. Gonna report if it works with it...
#SplashmasterBee
Seems to be a general cm11 issue, not device dependent.
Builds before (including?) 20140118 work, later builds don't.
http://forum.xda-developers.com/showthread.php?t=2622325
Just sharing with you , if anybody is interested, a Beta version of MIUI for the OnePlus One.
I flashed it successfully on my International OnePlus One and am running it right now.
ALL CREDITS GO TO ID这么难么的个人空间 (miui.com developer). You can see the original thread here:
http://www.miui.com/thread-1849318-1-1.html
My changes :
- removed Chinese apps
- removed Sougou keyboard and Baidu apps
- added Sony Keyboard
- a few minor build.prop changes
- ROM is already rooted, the MIUI permission manager works perfectly
How to flash :
1. Download : MIUI 2.0 BETA
and copy to your phones storage
2. Download the Gapps package and copy to your phones storage
3. Unlock bootloader and acquire custom recovery from here: https://forums.oneplus.net/threads/guide-oneplus-one-how-to-unlock-bootloader-install-custom-recovery-and-root.64487/
4. Reboot into recovery
5. Wipe data, cache, dalvik cache and sytem
6. Install OnePlus_MIUI2.0_BETA.zip
7. Reboot your phone and setup the MIUI account
8. Restart back into recovery and flash Gapps
9. Wipe Cache and Dalvik
10. Reboot into system
11. Enjoy MIUI
Screenshots (Mega folder link)
Thank's to : http://techpunked.wordpress.com/
Just an FYI... On the latest TWRP this takes a long time to flash... waited almost 5 minutes for the flash to finish...
Yvan12 said:
Just sharing with you , if anybody is interested, a Beta version of MIUI for the OnePlus One.
I flashed it successfully on my International OnePlus One and am running it right now.
ALL CREDITS GO TO ID这么难么的个人空间 (miui.com developer). You can see the original thread here:
http://www.miui.com/thread-1849318-1-1.html
My changes :
- removed Chinese apps
- removed Sougou keyboard and Baidu apps
- added Sony Keyboard
- a few minor build.prop changes
- ROM is already rooted, the MIUI permission manager works perfectly
How to flash :
1. Download OnePlus_MIUI2.0_BETA.zip and copy to your phones storage
2. Download the Gapps package and copy to your phones storage
3. Unlock bootloader and acquire custom recovery from here: https://forums.oneplus.net/threads/guide-oneplus-one-how-to-unlock-bootloader-install-custom-recovery-and-root.64487/
4. Reboot into recovery
5. Wipe data, cache, dalvik cache and sytem
6. Install OnePlus_MIUI2.0_BETA.zip
7. Reboot your phone and setup the MIUI account
8. Restart back into recovery and flash Gapps
9. Wipe Cache and Dalvik
10. Reboot into system
11. Enjoy MIUI
Screenshots (Mega folder link)
Thank's to : http://techpunked.wordpress.com/
Click to expand...
Click to collapse
Beautiful, thanks!
Will download now..thanx !!
Sent from my One using XDA Premium 4 mobile app
livito said:
Beautiful, thanks!
Click to expand...
Click to collapse
Please don't quote OP...
Sent from my One using XDA Premium 4 mobile app
Why is this in General instead of Android Dev?
Nice to see more ROMs on the OPO.
Nice op, thank you. Have you tried going back to CM11S or restoring from a CM11S NAND backup? I'm just wondering if you ran any to any issues going back and forth between this rom. Thanks
My phone stuck at 1+1 logo,cannot boot with miui,,already tried flash using twrp & philz cwm..now revert back to cm11s
Sent from my One using XDA Premium 4 mobile app
It works perfect on my phone. I'm just curious how updates will be handled.
Sent from my One using Tapatalk
Sir,can u explain to me what recovery u use?u are using bacon or a0001?
Sent from my One using XDA Premium 4 mobile app
I'm using the official TWRP.
Sent from my One using Tapatalk
On OPO Global Version
TWRP 2.7.1.0
Stock Kernel
coming from CM11S, Smooth as butter no problems so far.:good:
---------- Post added at 11:04 PM ---------- Previous post was at 10:52 PM ----------
synergeticink said:
Nice op, thank you. Have you tried going back to CM11S or restoring from a CM11S NAND backup? I'm just wondering if you ran any to any issues going back and forth between this rom. Thanks
Click to expand...
Click to collapse
Did Nand Restore to CM11S, No problemo.:good:
zephiK said:
Why is this in General instead of Android Dev?
Nice to see more ROMs on the OPO.
Click to expand...
Click to collapse
It's because it's a repost of a ROM found somewhere else on the internet and not the work of OP himself, also the text of OP is copied from that blogpost he is referring to.
Nand restore works perfectly people !!!
Installed..works perfect.. Anyway to get the cm11s camera apk?
marliv said:
Installed..works perfect.. Anyway to get the cm11s camera apk?
Click to expand...
Click to collapse
Yeah. Just grab CameraNext.apk from Apps/Themes Section and install it normally. Worked for me.
I have one major problem with this ROM (and specifically with MIUI). I can't get Bluetooth working in my Ford Focus. I get it to intially connect, but then Bluetooth on the phone force closes. I've had issues with this in the past with MIUI, so I don't know how to fix it. :\
*edit*
Found the fix. Stupid easy.
Sent from my SM-T900 using Tapatalk
Nxpx said:
Nand restore works perfectly people !!!
Click to expand...
Click to collapse
After nand restore are you getting any errors with Wifi, my wifi connectivity is good but when i go into the wifi setting its FCing.
EDIT: Never mind, the FC problem was from something else.
darkjedi said:
I have one major problem with this ROM (and specifically with MIUI). I can't get Bluetooth working in my Ford Focus. I get it to intially connect, but then Bluetooth on the phone force closes. I've had issues with this in the past with MIUI, so I don't know how to fix it. :\
*edit*
Found the fix. Stupid easy.
Click to expand...
Click to collapse
I always think when people answer there own question its a good idea to post the fix, to help others with potentially the same issue.
darkjedi said:
I have one major problem with this ROM (and specifically with MIUI). I can't get Bluetooth working in my Ford Focus. I get it to intially connect, but then Bluetooth on the phone force closes. I've had issues with this in the past with MIUI, so I don't know how to fix it. :\
*edit*
Found the fix. Stupid easy.
Sent from my SM-T900 using Tapatalk
Click to expand...
Click to collapse
Could you share the fix with the rest of us?
---------- Post added at 12:46 PM ---------- Previous post was at 12:38 PM ----------
dansou901 said:
Yeah. Just grab CameraNext.apk from Apps/Themes Section and install it normally. Worked for me.
Click to expand...
Click to collapse
Thx..installed,works great.. Installed screencast also working good..if u want xposed use wsm tools
Everyone! MIUI has been released for the note 4! Are there any T-Mo developers that could take a look at the ROM and try and update it?
http://forum.xda-developers.com/note-4/general/finally-note-4-miui-rom-t3221786
i flashed and been with that rom for one day,i could say its usable and 70% stable...
Click to expand...
Click to collapse
Why would anyone want a rom that's only 70% stable?
dkb218 said:
Why would anyone want a rom that's only 70% stable?
Click to expand...
Click to collapse
Because it's now being updated every week?
dkb218 said:
Why would anyone want a rom that's only 70% stable?
Click to expand...
Click to collapse
Yes because when custom roms started all of them were 100% stable right?!
Please don't debbie down the guy. I was actually hoping that MIUI would come to the Note 4, and so are others. It may currently on be 70% stable but it can be worked on to make it as close to 100% stable as possible. It's better than nothing.
I have to say aside from data connectivity issues the rom ran quite amazing when infested it a few days ago. Here and there things were in Chimeese or Japanese, which ever the ROM is in, but aside from that I actually had no FCs. Wifif was great. I did have data at one point yet in for get exactly how I had got it to run 3g. I tend to experiment with ROMs and flash odd ball fixes not quite developed for certain ROMs or devices. I did flash something and data worked yet in was having various FCs so it was unusable as a daily. I'll have to revisit and see where I can take it and report.
mattdiehl83 said:
I have to say aside from data connectivity issues the rom ran quite amazing when infested it a few days ago. Here and there things were in Chimeese or Japanese, which ever the ROM is in, but aside from that I actually had no FCs. Wifif was great. I did have data at one point yet in for get exactly how I had got it to run 3g. I tend to experiment with ROMs and flash odd ball fixes not quite developed for certain ROMs or devices. I did flash something and data worked yet in was having various FCs so it was unusable as a daily. I'll have to revisit and see where I can take it and report.
Click to expand...
Click to collapse
What did you flash to restore data?
It doesnt say that is for 910t.
How do you make it run flashing a kernel?
Here's the link.... No data just yet.... http://forum.xda-developers.com/showthread.php?p=63225505
Someone has to build a kernel for it, back in the day CM kernels were a good substitute.
Orical said:
Someone has to build a kernel for it, back in the day CM kernels were a good substitute.
Click to expand...
Click to collapse
I've flashed two kernels for it, and it bootloops. The kernel in it is made for MIUI.
wipe system, data and cached or format.
first miui rom
then data fix N910T, patch_N910T(camera fix)
and last gapps rom miui.
DATA FIX
https://drive.google.com/file/d/0B5-_pFg6DSq4eklXc3NrcXFUNGM/view?usp=sharing
GAPPS
https://drive.google.com/open?id=0B5...zlvdFFER1JGR1U
Camera Fix
https://drive.google.com/open?id=0B5...XRqTmlVUFZreUk
drshorty said:
wipe system, data and cached or format.
first miui rom
then data fix N910T, patch_N910T(camera fix)
and last gapps rom miui.
DATA FIX
https://drive.google.com/file/d/0B5-_pFg6DSq4eklXc3NrcXFUNGM/view?usp=sharing
GAPPS
https://drive.google.com/open?id=0B5...zlvdFFER1JGR1U
Camera Fix
https://drive.google.com/open?id=0B5...XRqTmlVUFZreUk
Click to expand...
Click to collapse
The gapps and camera links dont work can you please fix it, thanks!
noobiedev83 said:
The gapps and camera links dont work can you please fix it, thanks!
Click to expand...
Click to collapse
Here u go.
Gapps
https://drive.google.com/file/d/0B5-_pFg6DSq4NzlvdFFER1JGR1U/view?usp=docslist_api
Camera
https://drive.google.com/file/d/0B5-_pFg6DSq4eXRqTmlVUFZreUk/view?usp=docslist_api
drshorty said:
Here u go.
Gapps
https://drive.google.com/file/d/0B5-_pFg6DSq4NzlvdFFER1JGR1U/view?usp=docslist_api
Camera
https://drive.google.com/file/d/0B5-_pFg6DSq4eXRqTmlVUFZreUk/view?usp=docslist_api
Click to expand...
Click to collapse
Thank you!!
noobiedev83 said:
Thank you!!
Click to expand...
Click to collapse
Forget about sim activated, is because of tmobile build.prop. i have n910t and i dont have any problem yet, everything is working good now.
drshorty said:
Forget about sim activated, is because of tmobile build.prop. i have n910t and i dont have any problem yet, everything is working good now.
Click to expand...
Click to collapse
Data works fine this rom is awesome man thanks a lot for the fix!!!
noobiedev83 said:
Data works fine this rom is awesome man thanks a lot for the fix!!!
Click to expand...
Click to collapse
No problem ☺
drshorty said:
Forget about sim activated, is because of tmobile build.prop. i have n910t and i dont have any problem yet, everything is working good now.
Click to expand...
Click to collapse
dude incoming calls dont work
Diarrhea Slushie said:
dude incoming calls dont work
Click to expand...
Click to collapse
Im at work now.. I will check it tonight, i found the bug. I have some work for you...
Miui rom - extract the rom and the system folder out.
Data Fix - extract it, deleted system folder and put miui system folder in, compress it, then flash it.
Incoming call work and internet work.
---------- Post added 27th October 2015 at 12:07 AM ---------- Previous post was 26th October 2015 at 11:57 PM ----------
People having problem with incoming call or data mobile..
First install miui rom, data fix and camera fix. Then reboot. Set up everything.
Follow this step to fix incoming call after you install everything and set it up.
Im at work now.. I will check it tonight, i found the bug. I have some work for you...
Miui rom - extract the rom and the system folder out.
Data Fix - extract it, deleted system folder and put miui system folder in, compress it, then flash it.
Incoming call work and internet work.
install
First..............MIUI 7 - 5.10.24 ROM
Second......N910T DATA Fix.zip https://drive.google.com/open?id=0B5-_pFg6DSq4WFNYU1FmV1lrVlE
Last...............GAPPS or "download google installer from miui apps store"
Hi everyone,
I am currently running ResurrectionRemix ROM 6.0.1 Marshmallow. However, I'm having a lot of issues with it. As I have said in another topic my apps constantly crash. Also, my phone randomly reboots about 3 times a day. My Google Mapps isn't working very well either.
Therefore, I'm looking for another ROM. I'm pretty much a noob, so I don't really know what my best options are. I see that most ROMs now are for Lollipop, is there a big difference between Marshmallow and Lollipop?
If you guys could share your opinion about the best ROM, and most importantly stable wise, that would be very much appreciated. I don't really need that much options, I just want it to work well and fast. Also, one that doesn't drain my battery in no time would be nice.
Hope to hear from you!
I have not tried many yet but fortunately so far have had good luck with ressurection remix, you might want to try temaseks cm13 rom, as that seemed stable from the limited usage I had with it. But it might help people in giving recommendations if you gave a preference of touchwiz or non touchwiz (although it seems like you prefer stock).
Sorry I couldn't give more help.
Chris
cmro said:
I have not tried many yet but fortunately so far have had good luck with ressurection remix, you might want to try temaseks cm13 rom, as that seemed stable from the limited usage I had with it. But it might help people in giving recommendations if you gave a preference of touchwiz or non touchwiz (although it seems like you prefer stock).
Sorry I couldn't give more help.
Chris
Click to expand...
Click to collapse
Thanks for the reply. I actually found the Audax ROM which I've read a lot of positive things about. There's just one thing I don't understand (and I can't ask in that thread cause I don't have 10 posts yet lol). It says in instructions:
Download Rom and control MD5: (a6031473f6378a58555880af9ca65290)
Do you know what 'control MD5' means? Before this ROM I just flashed ROMs by doing a clean wipe and then just installing the ROM.. Never heard about MD5 before..
Deleted
Ma3lish said:
Thanks for the reply. I actually found the Audax ROM which I've read a lot of positive things about. There's just one thing I don't understand (and I can't ask in that thread cause I don't have 10 posts yet lol). It says in instructions:
Download Rom and control MD5: (a6031473f6378a58555880af9ca65290)
Do you know what 'control MD5' means? Before this ROM I just flashed ROMs by doing a clean wipe and then just installing the ROM.. Never heard about MD5 before..
Click to expand...
Click to collapse
MD5 is just an encryption type used in zip files. ROMs and System files will have MD5 codes(provided by uploaders) so that we can verify MD5 of downloaded files with source files. We can find if downloads are corrupt or missing any bit of data
---------- Post added at 09:41 PM ---------- Previous post was at 09:41 PM ----------
And AryaMod ROM is my choice. It has ROM control app with loads of MODs. Also comes with Option to choose Stock or Idle Kernel (Power saving)
nijom said:
MD5 is just an encryption type used in zip files. ROMs and System files will have MD5 codes(provided by uploaders) so that we can verify MD5 of downloaded files with source files. We can find if downloads are corrupt or missing any bit of data
---------- Post added at 09:41 PM ---------- Previous post was at 09:41 PM ----------
And AryaMod ROM is my choice. It has ROM control app with loads of MODs. Also comes with Option to choose Stock or Idle Kernel (Power saving)
Click to expand...
Click to collapse
I see, thanks. I actually tried to install Audax, but that went not exactly according to plan lol. I installed and got stuck with a message about Aroma Installer. Brainless me accidentely deleted my back-up from my SD-card so there I was with a useless piece of plastic. I am now installing the stock ROM with help from Odin, so if everything goes well it'll work soon again.
Now I'm a bit hesistant with trying a new custom ROM... I don't know why it kept getting stuck with the Aroma Installer message.. :/
You shouldn't overload apps in Aroma. Thats why it gets stuck there at times.
Few users select more apps than the system partition can hold.
Ma3lish said:
I see, thanks. I actually tried to install Audax, but that went not exactly according to plan lol. I installed and got stuck with a message about Aroma Installer. Brainless me accidentely deleted my back-up from my SD-card so there I was with a useless piece of plastic. I am now installing the stock ROM with help from Odin, so if everything goes well it'll work soon again.
Now I'm a bit hesistant with trying a new custom ROM... I don't know why it kept getting stuck with the Aroma Installer message.. :/
Click to expand...
Click to collapse
Were you not able to mount the phone over USB whilst in recovery meaning you could put the zip for a working ROM onto the phone and install that?
i have SM-N900L. will the Phronesis Rom wok on my phone?
Ardie009 said:
i have SM-N900L. will the Phronesis Rom wok on my phone?
Click to expand...
Click to collapse
Your phone is full supported mate ! Enjoy the best rom you ever seen
Aryamod no doubt.
Sent from my SM-N9005 using XDA Free mobile app
Markofree said:
Your phone is full supported mate ! Enjoy the best rom you ever seen
Click to expand...
Click to collapse
just tried it lately.. so smooth room.. no problem encountered.. thanks mate :good:
I am having international exynos version running kitkat..
Will phronesis rom work for me and should i upgrade to lollipop for installing phronesis rom
---------- Post added at 09:12 PM ---------- Previous post was at 09:10 PM ----------
Somebody help me with an answer.. I am a big noob.. Just bought note 3 international version.. Feeling battery is bit low
QUOTE=drarunmmc;64899305]I am having international exynos version running kitkat..
Will phronesis rom work for me and should i upgrade to lollipop for installing phronesis rom
---------- Post added at 09:12 PM ---------- Previous post was at 09:10 PM ----------
Somebody help me with an answer.. I am a big noob.. Just bought note 3 international version.. Feeling battery is bit low[/QUOTE]
Your is SM-N900 and Phronesis desn't work on this model !
Funny, out of all the popular roms here, I am on the resurrection remix rom right now and it is running flawlessly on my Canadian n900w8. Someone mentioned temesak cm 13 but I wouldn't recommend it. I installed it and my phone kept freezing up and rebooting. I would give temesak's cm 12.1 a try.
I has AryaMod V8.1, everything is perfect I only have two problems, if the screen is at rest notifications are not activated and the setting crashes sometimes
shekaky0 said:
I has AryaMod V8.1, everything is perfect I only have two problems, if the screen is at rest notifications are not activated and the setting crashes sometimes
Click to expand...
Click to collapse
If you're coming from anything other than Stock ROM, you'll have to flash a Stock ROM, update BL and CP and then flash AryaMod. Else there'll be crashes
I'm on AryaMod. so smooth, no crashes. For me it's perfect. Just one issue: can't type with bluetooth keyboard. I can pair it, but there is no input... Idk why. Still searching for a fix. I don't want to go back to 4.4.4.
I prefer the Unofficial CyanogenMod 13.0 ROM which is stable and runs smoothly on my phone. If you calibrate your battery after flashing a new rom it will last longer.
iNette
I recommed you cm11 kitkat!