Hi everyone,
Can you help me please i cant flash my defy+. i install android 4.3 on it and ewerything works great. then i want mak a clean instalation of 4.3 version and wipe data, dalvik after install! after that my phone stop on motorola logo! i try flash over the rsd but vhen i go on flash mod whit power+down volume nothing happens! rsd cant find the phone! plaese help! how to flash again??? is my phone dead?
TONCEK said:
Hi everyone,
Can you help me please i cant flash my defy+. i install android 4.3 on it and ewerything works great. then i want mak a clean instalation of 4.3 version and wipe data, dalvik after install! after that my phone stop on motorola logo! i try flash over the rsd but vhen i go on flash mod whit power+down volume nothing happens! rsd cant find the phone! plaese help! how to flash again??? is my phone dead?
Click to expand...
Click to collapse
To go to bootloader press Volume up+Power.
Power + volume up instead of down. You need bootloader for rsd.
Sent from my MB526 using xda app-developers app
Related
hello,
is it possible to switch from cm7.1-nightly to ms2ginger easily?
(cm7.1 is android v. 2.3.7 with kernel 2.32.9)
regards
Yes you can do that easily. The ms2Ginger thread has enough information on how to do that. I have switched twice from Cm7 to ms2g and vice versa.
In a nut shell just restore the manseoid back up of ms2g system, data, boot , dev tree and recovery. Before you do this just take nandroid backup of your current cm 7, which can be useful to switch back at later time if needed.
Sent from my MB526 using XDA App
ok. after installing ms2ginger it seem to be not my flavour.
i tryed to install cm72 (120131.05331-nightly) by epsylon. now, the device boots up, lights blue and green up and nothing more happens..
what can i do? (got backup but want a fresh install)
regards
now, when i push the poweron button, nothing happens..
the led lits up, when usb plugged in.. but thats all..
help?
_xo said:
now, when i push the poweron button, nothing happens..
the led lits up, when usb plugged in.. but thats all..
help?
Click to expand...
Click to collapse
CM7.2 is for Defy+ which uses GB kernel.
You can either flash CM7 kernel if it works, otherwise go to advance restore and restore boot and devtree from MS2 nandroid.
hey guyz need some help here.i own a defy+. i dont noe why but when i tried to install the walter9 MS2Ginger over the CM7.2,i got the bootloader err msg and the phone wouldnt startup.then i flashed the 2.3.6 sbf file via rsdlite and phn was back to its original working condition.then i rooted it again and then again tried MS2Ginger but after installation in recovery it asks for reboot.and after reboot, i got the same error saying
the same thing again
Bootloader
09.10
Err:A5,70,00,0023
again had to flash to original sbf
need help
coolgame said:
hey guyz need some help here.i own a defy+. i dont noe why but when i tried to install the walter9 MS2Ginger over the CM7.2,i got the bootloader err msg and the phone wouldnt startup.then i flashed the 2.3.6 sbf file via rsdlite and phn was back to its original working condition.then i rooted it again and then again tried MS2Ginger but after installation in recovery it asks for reboot.and after reboot, i got the same error saying
the same thing again
Bootloader
09.10
Err:A5,70,00,0023
again had to flash to original sbf
need help
Click to expand...
Click to collapse
Are you installing MS2G 2.1? and Did you follow the complete restore of nandroid backup, - system, data, boot, devtree and recovery?
yup i did twice.
coolgame said:
hey guyz need some help here.i own a defy+. i dont noe why but when i tried to install the walter9 MS2Ginger over the CM7.2,i got the bootloader err msg and the phone wouldnt startup.then i flashed the 2.3.6 sbf file via rsdlite and phn was back to its original working condition.then i rooted it again and then again tried MS2Ginger but after installation in recovery it asks for reboot.and after reboot, i got the same error saying
the same thing again
Bootloader
09.10
Err:A5,70,00,0023
again had to flash to original sbf
need help
Click to expand...
Click to collapse
I am searching for the instructions too:
http://forum.xda-developers.com/showthread.php?t=1468867&page=2
Will work the ms2ginger with cg version 6?
Anyone?
I had managed to get working, with instruction in the ms2ginger topic
To begin:
Put the Nandroid backup folder MS2Ginger on the SDCard in this folder: /sdcard/clockworkmod/backup
Root your DEFY and Install BOOTMENU - CWM (2ndInit-Installer 2.0.apk - install 1.0.7) or use this SndInitDefy_2.0.apk
REBOOT
run 2nd-init (voldown on blue LED)
wipe data and cache in "Stable/Custom - Recovery"
Go to "Recovery"
Go to "Latest Recovery"
Go to "Backup and Restore"
Go to "Restore" (system+data)
reboot.
Booting up can take a while, max is about 10 minutes.
THEN(if you want to try also the 3.0)
wipe data/cache/dalvik; Do an advanced recovery and only restore system and data from 3.0NG.
Hi, i have a work CM9 ICS build from epsy.
All works good, but today i want to flash a SBF to my Defy. But when i try to go to stock recovery (press vol-down and power button combo), it stuck at M Red Logo.
So, please, help me... how can i access the Stock Recovery?
To flash sbf you want to enter bootloader not recovery, so hold vol up and then turn on.
Djc
Sent from my MB525 using xda premium
djc151084 said:
To flash sbf you want to enter bootloader not recovery, so hold vol up and then turn on.
Djc
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
Yes, i know it
But first, i need to wipe cache and data from Stock Recovery... and i can' t access it
Questions go in the Q&A section, not the Dev section
remix96 said:
Yes, i know it
But first, i need to wipe cache and data from Stock Recovery... and i can' t access it
Click to expand...
Click to collapse
no need...just flash the SBF..
Hello...
i installed Cm9 followed the exact procedures give in http://www.youtube.com/watch?annota...&feature=iv&src_vid=5YJDcHjESKk&v=3v9OQY7yz7U
but now i am stuck at the CM9 boot screen.. i have an infinite boot...
i didnt take a nandroid backup...
i have the sbf files n rds lite, but it wouldnt let me go into it.. cm9 starts immediately after i plugin usb...
i tried re-flasing it.. no use.. please help...
Wipe data/factory reset.. and wipe cache partition..
after flashing the custom rom . . . . !
If wipe data/cache doesn't work.go to bootmenu and boot options.if adb is disabled...enable it.worked for me TODAY...after updating to a newer build it happened.
Sent from my MB526 using XDA
i cleared cache,dalvik,data.. n i also enabled adb.. no use.. can i load a nandroid i dowloaded from the net.. ? would it work?
what's your phone defy or defy+, green or red lens, which build did you instal?
i have Defy, green lens, i installed CM9 nightly [CM9-NIGHTLY-120416-Defy]
used CM7 kernel n gapps...
any help would be appreciated... thanks in advance...
Try the whole procedure once again:
Get latest build (Epsylon's for example): http://defy.wdscript.fr/defy-cm9/CM9-NIGHTLY-120428-Defy.zip
Kernel: http://m.cfa.aero/misc/CM7_Kernel-signed.zip
Gapps: http://cmw.22aaf3.com/gapps/gapps-ics-20120317-signed.zip
Place them on sdcard, go to stable recovery and do as following:
- wipe data/factory reset
- install zip from sdcard: ROM > KERNEL > GAPPS
- wipe cache partition, advanced > wipe dalvik cache then reboot
First boot can take a while. Good luck!
I switched on the defy holding powerup n entered SW update mode...
used rds lite n installed sbf.. my defy is back again..
i will try installing CM9 again now.. thanks All for ur timely support...
[email protected] said:
I switched on the defy holding powerup n entered SW update mode...
used rds lite n installed sbf.. my defy is back again..
i will try installing CM9 again now.. thanks All for ur timely support...
Click to expand...
Click to collapse
See this link it might help you: http://forum.xda-developers.com/showthread.php?t=1618904
[email protected] said:
Hello...
i installed Cm9 followed the exact procedures give in http://www.youtube.com/watch?annota...&feature=iv&src_vid=5YJDcHjESKk&v=3v9OQY7yz7U
but now i am stuck at the CM9 boot screen.. i have an infinite boot...
i didnt take a nandroid backup...
i have the sbf files n rds lite, but it wouldnt let me go into it.. cm9 starts immediately after i plugin usb...
i tried re-flasing it.. no use.. please help...
Click to expand...
Click to collapse
May be this post will help you...
Link
Hi i have motorola defy and i am using 4.1 jb but while downgrading 2.3 i got problem and now its not booting up i stuck at the motorola logo...so how to hard reset or how to flash it again because while flashing 4.0 its showing error...i am not able to flash whith init2recovery or cwm recovery......
Plz reply how to get back or hard rest how to flash new os plz reply its urgent
chiragrocks2 said:
Hi i have motorola defy and i am using 4.1 jb but while downgrading 2.3 i got problem and now its not booting up i stuck at the motorola logo...so how to hard reset or how to flash it again because while flashing 4.0 its showing error...i am not able to flash whith init2recovery or cwm recovery......
Plz reply how to get back or hard rest how to flash new os plz reply its urgent
Click to expand...
Click to collapse
Are you using the Quarx version?, which ROM did you have before flashing JB?, which Kernel are you using?
AHHH U KNOW THAT THERE IS DAT SEARCH BUTTON!?!?!
Power off
Hold volume down+power
When android logo comes, press both volume buttons
Wipe data/factory reset
Reflash SBF (maybe unnecessary)
not booting
hsrars-d said:
ahhh u know that there is dat search button!?!?!
Power off
hold volume down+power
when android logo comes, press both volume buttons
wipe data/factory reset
reflash sbf (maybe unnecessary)
Click to expand...
Click to collapse
hi i tried both the method but not booting up now also...
chiragrocks2 said:
hi i tried both the method but not booting up now also...
Click to expand...
Click to collapse
u tried RDS Lite + stock SBF ?:silly:
http://forum.xda-developers.com/showthread.php?t=1216982
well I have defy green lense... I just flash miui pikachu edition, It was working fine then last night I'd just flash another JB ROM that was working fine... but when I again try to flash pikachu ROM it was stuck on motorola M logo no blue LED turn on ....after that I flash a fixed sbf "4.5.3-109-fixed.sbf" this one....
the problem is same no blue LED turn on ... Please let me know how I can get CMW again .. step by step procedure needed. Thanks!
Note: I was using GB kernel 3.4.7
Your 2ndinit got wiped, hence no blue LED. If you can boot into the stock ROM, you need to root it and install 2ndinit apk(just search for 2ndinit defy on Google) and install your custom recovery again. After this you will get the blue LED again
Sent from my MB526 using xda premium
thekguy said:
Your 2ndinit got wiped, hence no blue LED. If you can boot into the stock ROM, you need to root it and install 2ndinit apk(just search for 2ndinit defy on Google) and install your custom recovery again. After this you will get the blue LED again
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I cant boot into stock ROM, phone stuck on motorola M logo..... Can I flash full sbf again, coz I was on fixed GB sbf?
slhysf said:
I cant boot into stock ROM, phone stuck on motorola M logo..... Can I flash full sbf again, coz I was on fixed GB sbf?
Click to expand...
Click to collapse
Get into stock recovery by keeping volume down pressed when powering the phone.
When you see a triangle with excl. mark press volume down and up at the same time
Wipe data and cache
If above doesn't work flash proper full sbf and repeat the procedure
You're stuck on red logo as you have not wiped data from stock recovery, and instructions are /\
Sent from my MB526 using xda premium