Related
Hey, I could really use some guidance here. I'll present the information as simply as I can:
I bought a Galaxy s4 AT&T a few days ago. I've been interested in rooting and flashing different roms, but I think I may have done a bit too much.
I rooted using the motochopper method - great, worked like a charm.
I made a backup of my original rom using CWM. I even took that backup and saved a copy of it on my Mac - perfect.
I thought I'd try Cyanogenmod 10.1, so I downloaded the latest nightly build and flashed it using CWM - so far so good.
Everything was working fine, but my LTE (or any data) was not working at all. I could use Wifi, but once I turned wifi off, I had no data, no gps, no 3g, no 4g, no LTE. I tried the *#*#4636*#*# method, the LTEOnOff app, and changing my APN based on the recommendations provided in this thread - I just couldn't get it to work.
I thought I'd try restoring my original backup, but when I went into CWM to do so, it said that my backup could not be found...(I still have a backup on my computer, just in case)
I needed my phone to work, and badly needed LTE to do so. So, I downloaded this rom: [ROM] CleanROM 1.0 -★| Clean and Smooth! | The Way Nature Intended! |★-
So far, this rom was working fine - it's just a debloated version of TouchWiz - which I like. But, here's my problem now - If my phone reboots, it stays frozen on the Samsung logo (with unlocked lock logo underneath), and I can't get past it. I'd have to go BACK into recovery, and flash the CleanROM all over again, and set my phone up as new with all data wiped.
I really need my phone to work again, and I don't know where to go from here. What options do I have left? What can I do to get out of that frozen Samsung loading screen? Can't I just reset my phone to the way it was? Can't the CM10.1 rom work with LTE?
Your help will be greatly appreciated.
Your best option is to flash the stock MDB firmware via odin . After you get the PASS on Odin go ahead and manually boot into stock recovery and wipe data factory reset again then reboot. You will have to re root and reinstall recovery but this will take care of any issues you had from a bad flash.
http://forum.xda-developers.com/showthread.php?t=2261573
Sent from my GT-I9505G using Tapatalk 2
mavverick said:
Hey, I could really use some guidance here. I'll present the information as simply as I can:
I bought a Galaxy s4 AT&T a few days ago. I've been interested in rooting and flashing different roms, but I think I may have done a bit too much.
I rooted using the motochopper method - great, worked like a charm.
I made a backup of my original rom using CWM. I even took that backup and saved a copy of it on my Mac - perfect.
I thought I'd try Cyanogenmod 10.1, so I downloaded the latest nightly build and flashed it using CWM - so far so good.
Everything was working fine, but my LTE (or any data) was not working at all. I could use Wifi, but once I turned wifi off, I had no data, no gps, no 3g, no 4g, no LTE. I tried the *#*#4636*#*# method, the LTEOnOff app, and changing my APN based on the recommendations provided in this thread - I just couldn't get it to work.
I thought I'd try restoring my original backup, but when I went into CWM to do so, it said that my backup could not be found...(I still have a backup on my computer, just in case)
I needed my phone to work, and badly needed LTE to do so. So, I downloaded this rom: [ROM] CleanROM 1.0 -★| Clean and Smooth! | The Way Nature Intended! |★-
So far, this rom was working fine - it's just a debloated version of TouchWiz - which I like. But, here's my problem now - If my phone reboots, it stays frozen on the Samsung logo (with unlocked lock logo underneath), and I can't get past it. I'd have to go BACK into recovery, and flash the CleanROM all over again, and set my phone up as new with all data wiped.
I really need my phone to work again, and I don't know where to go from here. What options do I have left? What can I do to get out of that frozen Samsung loading screen? Can't I just reset my phone to the way it was? Can't the CM10.1 rom work with LTE?
Your help will be greatly appreciated.
Click to expand...
Click to collapse
Factory Reset
Wipe Cache
Wipe Dalvik
Format /system
Flash ROM or ROM and gapps if AOSP
Reboot
KingKongDingDong said:
Factory Reset
Wipe Cache
Wipe Dalvik
Format /system
Flash ROM or ROM and gapps if AOSP
Reboot
Click to expand...
Click to collapse
Having the same issue so I figured I'd give these steps a shot. Followed them exactly and phone (AT&T S4, TWRP) would won't even reboot the first time into CleanROM. I'm stuck on the Samsung screen with the lock.
edit: I've noticed that now, when I reboot into TWRP, it prompts me for a password. Hitting cancel takes me to the regular home screen, but I had not been getting the password prompt before attempting to install CleanROM. A permissions issue, perhaps?
edit 2:
I've just spent some time trying a bunch of things with bits of good luck surrounded with tons of bad. Below are the steps I've taken to try to get CleanROM to boot (and reboot) without any issues. Hopefully they help figure out the issues we're having.
Wipe Cache
Wipe Dalvik
Wipe /system
Flash CleanROM
Reboot
---- Failed
Reboot into Recovery
Prompted for password, hit cancel
Fix permissions
---- Failed
Reboot to recovery
Prompted for password, hit cancel
Format data (type yes)
Reboot
---- Successfully booted to CleanROM
Ran through phone / account setup
Saw home screen
Powered off and then back on (not using reboot)
---- Failed
Reboot to Recovery
No longer prompted for password
Factory Reset
Attempt to Fix Permissions: failed
Restore default settings
Reboot system
---- Failed
Reboot to Recovery
Prompted for Password, hit cancel
Format Data (type yes)
Reboot System
--- Successfully booted to CleanROM
Ran through phone / account setup
Saw home screen
Reboot (using reboot, not power off / on)
---- Failed
Reboot to Recovery
Prompted for password, hit cancel
Factory Reset: failed
Restore Default settings
Prompted for password, hit cancel
Factory Reset: failed
* Internal Storage showing 0MB (as if it's not reading it correctly)
Fix Permissions
Prompted for password, hit cancel
Nothing has changed, my phone is currently chilling in TWRP
MJHawaii said:
Your best option is to flash the stock MDB firmware via odin . After you get the PASS on Odin go ahead and manually boot into stock recovery and wipe data factory reset again then reboot. You will have to re root and reinstall recovery but this will take care of any issues you had from a bad flash.
http://forum.xda-developers.com/showthread.php?t=2261573
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
This. You decided to ignore this post for some reason.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
cuffed zhesea
Cataligh said:
This. You decided to ignore this post for some reason.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I can't speak for OP, but I was hoping there was another way to rectify what has already been done without flashing stock seeing as how I'm on OSX. If that's the only option, then so be it.
Hey. Thanks for the feedback in this thread. I flashed factory through Odin, and everything is working fine. I then factory reset my phone through factory recovery. I'm back to standard touchwiz with all the bloat lol.
I'm going to wait until there a more stable release of cm10.1 - that was a good rom.
Appreciate all the help people!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Your best bet is do what "cataligh" mentioned... flash back to stock via odin...
Sent from my SAMSUNG-SGH-I337 using xda premium
When you flashed cm10 it probably wipe the internal sdcard, you should ALWAYS do you backups to the extsdcard...period.
TheAxman said:
When you flashed cm10 it probably wipe the internal sdcard, you should ALWAYS do you backups to the extsdcard...period.
Click to expand...
Click to collapse
Yeah, absolutely! I always backed up and flashed roms from my external SD.
mavverick said:
I'm going to wait until there a more stable release of cm10.1 - that was a good rom.
Click to expand...
Click to collapse
waiting is for simpletons. get aokp and transcend...
jaboles said:
I can't speak for OP, but I was hoping there was another way to rectify what has already been done without flashing stock seeing as how I'm on OSX. If that's the only option, then so be it.
Click to expand...
Click to collapse
As I mentioned before starting over is always the Best and Safe way to go. Shortcuts will only cause you headaches and possibly get you a brick that is why you see Odin stock threads. Do yourself a favor and start over I know it sucks but when your modifying your phones its gonna happen once in awhile.
Sent from my GT-I9505G using Tapatalk 2
MJHawaii said:
As I mentioned before starting over is always the Best and Safe way to go. Shortcuts will only cause you headaches and possibly get you a brick that is why you see Odin stock threads. Do yourself a favor and start over I know it sucks but when your modifying your phones its gonna happen once in awhile.
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Wise words. Took your advice, installed Windows with boot camp, and got back to stock via odin.
I am going to say something about this thread, we are all giving advice on how to do this and that, and not once is it mentioned anywhere....in the OP
WHAT DEVICE WE ARE TALKING ABOUT! PLEASE STATE THE DEVICE WHEN NEEDING HELP!
The Ax says, I apologize if I missed what device.
TheAxman said:
I am going to say something about this thread, we are all giving advice on how to do this and that, and not once is it mentioned anywhere....in the OP
WHAT DEVICE WE ARE TALKING ABOUT! PLEASE STATE THE DEVICE WHEN NEEDING HELP!
The Ax says, I apologize if I missed what device.
Click to expand...
Click to collapse
My original question was for the AT&T version of the Galaxy S4 - i337.
xBeerdroiDx said:
waiting is for simpletons. get aokp and transcend...
Click to expand...
Click to collapse
Welllllll I just tried installing AOKP as well (Task650). Buttttttt, same issue with the LTE stuff. I tried reviewing all the APN settings, but didnt get any data connection on my phone except for wifi.
mavverick said:
Welllllll I just tried installing AOKP as well (Task650). Buttttttt, same issue with the LTE stuff. I tried reviewing all the APN settings, but didnt get any data connection on my phone except for wifi.
Click to expand...
Click to collapse
What APN settings were you using?
Sent from my SAMSUNG-SGH-I337 using xda premium
doktor buknasty said:
What APN settings were you using?
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Yeah, data was enabled - and I was using ATT LTE apn settings that I found on these forums. I made sure to use the right now. Plus, when I rebooted my phone, it got stuck on the Samsung lock screen again...
Juuuuust ODINed back to factory right now for the second time :crying:
Was it these settings:
Sent from my SAMSUNG-SGH-I337 using xda premium
doktor buknasty said:
Was it these settings:
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Yes, those were the exact settings that I used. Is it possible that I could have a defective phone or sim card?
Right now, I am on factory touchwiz with root enabled, and my phone is working perfectly fine. I can reboot, use LTE, everything. The problem starts when I load any CM or AOKP rom...
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
ckalantzis said:
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
If I were you I would go back and read a little information about mf3 and what kind of recovery can be used. It sounds to me like you might be very confused. In order to correctly keep from bricking your phone you may want to read up on things. Good luck.
ckalantzis said:
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
Since you are rooted, take a look in the /cache/recovery directory. Read the log file. It will tell you where things messed up.
For example, I had forgotten that I did something with csc and had replaced the feature.xml file. Luckily, I had a back up of the original file. I renamed it, fixed is file permissions to rw-r--r--, advanced my clock one day, and then was able to install MJ9.
Good luck, and remember you won't have root anymore when you install this (for the time being)
Yrs,
dkephart
Sent from my SAMSUNG-SGH-I337 using Tapatalk
ckalantzis said:
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
I had the same problem. The only way I was finally able to upgrade to 4.3 was to use Odin to revert to stock (unrooted) 4.2.2 MF3 using the files on this thread: http://forum.xda-developers.com/showthread.php?t=2502003 Once I did that I ran the OTA update to 4.3 and it worked without any problems
To able to keep your root and upgrade from 4.2.2 to 4.3 you have to change your param file back to the stock. Thats all the information that I have so far so... not completely sure. But I think that is what you're supposed to do.
Because you have a custom param file, when you try to upgrade to 4.3 it's telling you there is an issue with your phone.
I may be wrong.
Is there a copy of the correct feature.xml? Im having the same issue
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
According to the log its stopping when it can't find the chat on apk. I did remove it using titanium.
Will restore it try again andbipdate the thread. Thanks for pointing out the correct log file to look at.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I checked again and found my backup feature.xml. Typed this from mj9.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ckalantzis said:
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
I had the same problem happen to me on Wednesday night and last night. Today I used Odin to go back to stock MF3, however, then I couldn't get the OTA update. It kept saying my firmware was up to date each of the three times I restored it.
Now I'm finally on MJ9 after copying "update-mf3-mj9.zip" to my SD card, going into recovery mode, and updating from external SD card. Now I can use my Galaxy Gear!
Cause I want to sound like a noob.
How did you install CWM on what reads to me a MF3 S4.
Those on MF3 have been using Safestrap cause CWM hasn't been possible.
Sent from my ATT S4 MF3 using Tapatalk
jball said:
Cause I want to sound like a noob.
How did you install CWM on what reads to me a MF3 S4.
Those on MF3 have been using Safestrap cause CWM hasn't been possible.
Sent from my ATT S4 MF3 using Tapatalk
Click to expand...
Click to collapse
I was excited when I rooted the phone, then installed ROM manager premium. It allowed me to install the recovery. You can even boot into the recovery from ROM Manager.
However since the S4 is locked down tight, you can do any thing from there. So i can't flash anything. It even gives me a message saying as much.
However it is partially installed I can boot into it at will.
I will post a video of it. So that you all have an idea of what im talking about.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Don't waste your time with a video,its your stock recovery.your not the first to have done this.lets jump ahead a bit and just install Safestrap.whats Safestrap you might ask?search for it and READ please sir.
Sent from my ATT S4 MF3 using Tapatalk
jball said:
Don't waste your time with a video,its your stock recovery.your not the first to have done this.lets jump ahead a bit and just install Safestrap.whats Safestrap you might ask?search for it and READ please sir.
Sent from my ATT S4 MF3 using Tapatalk
Click to expand...
Click to collapse
While I was preparing to record it, I did notice that you are correct. Although Rom Manager goes through the motions of flashing the recovery, when you attempt to boot into the Recovery, you are faced with an Error, and default back into Android Recovery.
Although I know all about Safestrap...I think we've all missed the point. The OP was meant to get help about why the 4.3 OTA was failing 25% into the install.
I've got what I needed by being pointed to the location of the install log.....and while reading through it, I noticed that the install is failing because I removed the Chat On APK. I will install from backup and move forward.
Thank you all who provided the necessary guidance to solve the original problem.
Thank you as well to those who helped clear up the whole Clockwork vs Android recovery part. Although a minor part of the original post, it's good that we don't spread misinformation.
Cheers
ckalantzis said:
While I was preparing to record it, I did notice that you are correct. Although Rom Manager goes through the motions of flashing the recovery, when you attempt to boot into the Recovery, you are faced with an Error, and default back into Android Recovery.
Although I know all about Safestrap...I think we've all missed the point. The OP was meant to get help about why the 4.3 OTA was failing 25% into the install.
I've got what I needed by being pointed to the location of the install log.....and while reading through it, I noticed that the install is failing because I removed the Chat On APK. I will install from backup and move forward.
Thank you all who provided the necessary guidance to solve the original problem.
Thank you as well to those who helped clear up the whole Clockwork vs Android recovery part. Although a minor part of the original post, it's good that we don't spread misinformation.
Cheers
Click to expand...
Click to collapse
You handled this all very well.
ITNV said:
I had the same problem. The only way I was finally able to upgrade to 4.3 was to use Odin to revert to stock (unrooted) 4.2.2 MF3 using the files on this thread: http://forum.xda-developers.com/showthread.php?t=2502003 Once I did that I ran the OTA update to 4.3 and it worked without any problems
Click to expand...
Click to collapse
Did you use all files? I mean, I've been trying the same for the past couple of days, and I even asked in that thread if I could use just the PDA file, nobody replied so I went ahead and did it, it removed the root and I kept all my files and settings (That was the idea) but just after that I can't connect anymore to Kies ( I could without issues, I did a full backup moments before) and trying to do the sideload it always gives me the Error 7, I even tried the full SD card update,it erased everything and guess what, when it rebooted for my surprise I was still at 4.2.2 MF3, so it just did the Wipe Data and then rebooted, so I lost almost 6 hours getting everything back as it was and then, I had the Damaged SD card error so I also lost all my pictures and videos withoout back up.
So, as you can see half a day later I'm still at the same point I was this morning and with a huge loss, so, please, Did you use all the files? If you did, doing this erase everything also?
Thanks in adavance.
erasat said:
So, as you can see half a day later I'm still at the same point I was this morning and with a huge loss, so, please, Did you use all the files? If you did, doing this erase everything also?
Thanks in adavance.
Click to expand...
Click to collapse
Yes. I used all the files. The result was a completely stock unrooted 4.2.2 so, yes, it reset the phone and erased everything that I had on there. (It left my external SD card intact but I would still advise removing it if there is anything on there you don't want to lose.)
ITNV said:
Yes. I used all the files. The result was a completely stock unrooted 4.2.2 so, yes, it reset the phone and erased everything that I had on there. (It left my external SD card intact but I would still advise removing it if there is anything on there you don't want to lose.)
Click to expand...
Click to collapse
Yep, that was the reason why I just used the PDA I didn't want to lose my data, and then I did it anyways, my mistake was not doing the Odin Restore just after I realized that it erased everything and I was still at 4.2.2, that's was the perfect time to do it, but now, after I finally put everything back as it was, I simply don't see myself by my own choice, doing all this again.
Thanks.
erasat said:
Did you use all files? I mean, I've been trying the same for the past couple of days, and I even asked in that thread if I could use just the PDA file, nobody replied so I went a head and did it, it removed the root and I kept all my files and settings (That was the idea) but just after that I can't connect anymore to Kies ( I could without issues, I did a full backup moments before) and trying to do the sideload it always gives me the Error 7, I even tried the full SD card update,it erased everything and guess what, when it rebooted for my surprise I was still at 4.2.2 MF3, so it just did the Wipe Data and then rebooted, so I lost almost 6 hours getting everything back as it was and then, I had the Damaged SD card error so I also lost all my pictures and videos withoout back up.
So, as you can see half a day later I'm still at the same point I was this morning and with a huge loss, so, please, Did you use all the files? If you did, doing this erase everything also?
Thanks in adavance.
Click to expand...
Click to collapse
It was mentioned several times in that thread exactly what files to use and how to use them. There were also several pictures provided that showed EXACTLY what the ODIN screen should look like before the flash.
scott14719 said:
It was mentioned several times in that thread exactly what files to use and how to use them. There were also several pictures provided that showed EXACTLY what the ODIN screen should look like before the flash.
Click to expand...
Click to collapse
In the thread, there are tons of instances where it explains where to use each file and even pictures, I know because I read every single post, but none of them explains if I could use just the PDA one if I wanted to keep my settings while unrooting the phone, that's why I asked about it, because nobody replied to my question I decided to be the guinea pig, and yes, it works, you keep your settings, and I was glad, but as you can see, what I wanted to accomplish didn't work after all. Without all the files it doesn't fix the issue that causes the error 7 when doing the sideload.
help with mf3 to mj9
Having the same issue and formatted card with backup image.
Update got to 23 % and failed
now phone refuses to flash in odin.....and im missing factory apps preventing me from doing anything to get it back to stock
anyone have a stock restore image I could use in kies?
Would that work properly?
Hi, I was hoping to get some help and insight with the situation I've been dealing with. I'll give as much information as possible so that someone might be able to point me in the right direction.
I have an att galaxy s4 that was purchased and rooted before the mf3 ota that made everything so difficult. I've flashed several roms and decided to go with liquidsmooth 2.37 atm and I'm experiencing a few odd issues (stock mss not working) that no one else seems to have, but for the most part it's running very well. Lately I've wanted to go with a rom using the new 4.4 and I've tried a handful no matter what rom I try I have the same issues. so far I've tried CM 11, Omnirom and Gummy. With all of them everything runs very laggy and glitchy and will frequently freeze until it crashes and reboots. Every single time I've used whatever gapps are linked in the op for every rom and followed flashing instructions to the letter (wipe data/factory reset, wipe cache, wipe dalvik, flash rom , flash gapps, flash super su (if needed) and reboot) and I've even tried different recoveries (both cwm recovery 6.0.4.4 and the latest philz cwm recovery) same results every time. This part shouldn't matter, but I tried flashing these roms while on the original mdl modem and after upgrading to mj9. Let me know any other info you need, but I've tried to be thorough. I appreciate the help.
So what firmware are you on right now?
scott14719 said:
So what firmware are you on right now?
Click to expand...
Click to collapse
I'm guessing mdb
sorry thought i mentioned the firmware is mdl
Rockman195 said:
sorry thought i mentioned the firmware is mdl
Click to expand...
Click to collapse
Looks like you're doing everything right. Have you checked md5's of your downloads?
I don't know how to do that or else I would
Sent from my SGH-I337 using xda app-developers app
Rockman195 said:
I don't know how to do that or else I would
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
http://onlinemd5.com/
Thanks for the link. I'm looking into md5 checking and I downloaded the hash droid app. My only question is when I calculate the md5 of a file what am I supposed to compare it to?
Sent from my SGH-I337 using xda app-developers app
Rockman195 said:
Thanks for the link. I'm looking into md5 checking and I downloaded the hash droid app. My only question is when I calculate the md5 of a file what am I supposed to compare it to?
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
You should compare it to the md5 typically posted where you download the file from
Ok so the dl site like devhost or whatever
Sent from my SGH-I337 using xda app-developers app
Rockman195 said:
Ok so the dl site like devhost or whatever
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Correct. I usually just compare the last 5 or 6 characters. If they match it's very unlikely the others won't too.
tried going back and looking in all the threads that I downloaded roms from, can't find md5s for any of them with one exception and thats an outdated version of a rom I'm not currently trying to flash, so I don't see the point in downloading it just to compare the md5
Downloaded an omnirom build and checked the md5 and everything was good, plus I would be surprised if the md5s were bad on all the roms I've tried. Any other suggestions? Should I try two recovery instead of coming?
Sent from my SGH-I337 using xda app-developers app
Rockman195 said:
Downloaded an omnirom build and checked the md5 and everything was good, plus I would be surprised if the md5s were bad on all the roms I've tried. Any other suggestions? Should I try two recovery instead of coming?
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I'm running out of ideas try twrp recovery. Here is a zip you can flash in your current recovery http://forum.xda-developers.com/showthread.php?p=45511518
flashed twrp and that royally screwed up the phone. opened recovery using twrp and made a back up then did a system wipe and went to install the rom and when I went to do that, the list of all teh files you have to choose from was blank. I could go through different folder levels but the part where it shows the contents was always emtpy. Sometimes I could touch the area and see I portion highlight like it was making a selection but it wouldnt do anything and there was no file name there. Went to restore the backup I made and there was nothing in the list of backups to restore from. Rebooted the phone and liquid smooth 2.37 loaded like a clean flash with none of my info, files, apps, etc so I downloaded rom manger from the playstore and put the latest cwm touch on there. When I went in recovery none of my cwm backups where there or anything so i went to reboot and it only shows the samsung boot screen. Downloaded a few different roms and gapps on my sd card from y computer and put them on the phone and flashed the roms and gapps and still can't get past the boot screen. I'm really open to suggestions on this one.
If it was me, at this point I'd Odin the stock mdl firmware and start all over again. Something's not right with your phone. But it scares me a little since things aren't flashing correctly and there could be something wrong with your internal memory. If memory is bad it could make things worse.
I think your right. Do you know where I can find the stock firmware and instructions for flashing it? I haven't used Odin in a while.
Sent from my GT-N8013 using xda app-developers app
Rockman195 said:
I think your right. Do you know where I can find the stock firmware and instructions for flashing it? I haven't used Odin in a while.
Sent from my GT-N8013 using xda app-developers app
Click to expand...
Click to collapse
You can get the stock firmware at sammobile.com. it's free but you have to register. You'll download a zip file. Use 7-zip to extract the .tar.md5 file from it and use that in Odin, PDA slot. This is a guide that is not for the s4 but the procedure is the same. It has screen shots in it that help. Don't use any files in it though other than odin. Good luck. http://forum.xda-developers.com/showthread.php?p=26056924
I haven't read the whole thread, so hopefully these haven't already been covered.
1) Make sure your recovery supports 4.4. Not all of them do. Stay the heck away from TWRP because it's done nothing but suck for Galaxy S4, while it was absolute king for the S3. The wrong recovery can still flash a ROM but that ROM may not work very well.
2) Ensure you do a COMPLETE wipe. As in wipe /system and /data. Make sure your internal SD card is formatted. 4.4 may not use some things & folders that 4.2 and 4.3 did, which might cause problems.
3) If you have an external SD, then make sure 4.4 is using the right path for it to access any important files you may have on it, like apps2sd & such.
Well since screwing things up with twrp I'm back to having a working phone again. I didn't have to use Odin but I still might just to go back to stock and then try kit kat. I went into cwm recovery and formatted the system then flashed liquidsmooth 2.37 which is what I was running. Everything works fine with that except when I use the rom manager widget to boot into recovery, it goes to the boot screen with booting recovery at the top but doesn't go further. I have to use the 3 button method to get into recovery. The other odd thing is that mms works for me now.
I tried flashing gummy 4.4 again since everything is fine in jb but I still have the same jittery twitchiness. One thing I noticed is that when I go into the performance settings in 4.4 the current cpu reading will jump from 300 mhz to 1200 to 400 to 1800 etc just at idle. Is that normal. My note 10.1 holds steady when it's just sitting there.
To answer your questions, I'm using cwm 6.0.4.4 which is kit kat approved and I formatted and wiped everything before flashing and it didn't change anything. I appreciate your help so far and look forward to more insight.
Sent from my SGH-I337 using xda app-developers app
I installed the HORSEMAGEDDON ROM and it worked - for the most part. But it kept giving me annoying errors about different apps that were attempting to update every time I turned it on. So I tried to restore my backup that I had made with CWM 6.0.2.8. However the backup apparently did not restore properly because it now boot loops back into CWM any time I try to start it. I get the errors:
E:Can't open cache/recovery/log
E:Can't open cache/recovery/log
E:Can't open cache/recovery/last_log
E:Can't open cache/recovery/last_log
So I tried to reflash HORSEMAGEDDON but it still loops back into the CWM recovery screen.
I have wiped everything according to the instructions on the HORSEMAGEDDON thread.
HELP!! This happened to me on another U8800-51 phone and I wound up hard bricking it trying to get back to stock.
Anybody???
Does anybody have any ideas on how I can fix this?
Did you wipe cache/dalvik cache?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
iheartsamsung said:
Did you wipe cache/dalvik cache?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yes. I did a wipe of data and factory reset as well.
What I would do is get an SD card with a custom rom on it and try installing it from recovery menu
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Obviously you have been having problems with that rom, so go with something different.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
iheartsamsung said:
Obviously you have been having problems with that rom, so go with something different.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Okay. Here is what I did step by step:
1. I was on Stock 2.2.2 Froyo and flashed HORSEMAGEDDON successfully. But I had some errors related to updates since it was such an old ROM the updates were all for much newer versions of the apps tied to 4.x.x.
2. I attempted to restore my backup made with CWM 6 to return to the stock. It said it completed successfully but when I rebooted it just looped into the recovery screen with the error messages posted in my first post.
3. So I tried to reflash HORSEMAGEDDON and it said it completed successfully. But it still bootloops into recovery.
4. I can access most of the features of the recovery. I can access the pink screen and swap recovery versions. I can access my SD card from my PC when I mount it from recovery.
5. Yes, I did do full wipes with each attempt to reflash.
The ROM was not the problem. It worked and worked well other than update issues for apps. It was only after attempting to restore to stock I ran into issues.
The problem appears to be something was corrupted when I tried to restore my backup, even though it said it completed successfully.
So if I try to flash yet another custom ROM, even if I could find one I trust given all of the version issues etc., I don't think it would act any differently. But if somebody can recommend one I am all ears. Keep in mind I have a -51 phone so it will have to be for that or the PRO.
Given that, how can I get back to stock? Am I the only person who has ever had this problem? I don't believe that is the case, so somebody must know how to fix it or can point me to a procedure to repair the internal memory.
Help!!
I'm new at xda so it's not letting me post an external link. Google "bootlooping" and the first one in list is from xda, just follow the instructions
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Thanks but.....
iheartsamsung said:
I'm new at xda so it's not letting me post an external link. Google "bootlooping" and the first one in list is from xda, just follow the instructions
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
None of the fixes on this link seem to apply to my situation.
When I said "bootloop" I may have misused the term. What happens is I power up, it goes to logo screen for about 10 seconds, shuts down and restarts to logo screen then goes into recovery after about 5 seconds. From other info that I have found it is due to a corrupt bootloader and I need to reflash the bootloader. Problem is, reflashing the bootloader i.e. CWM, does no good at all.
I am also hampered by lack of info specific to the -51 model. And I cannot find a copy of the stock ROM anywhere that is for the -51.
So essentially I am screwed. All of that said, I have found a new phone for $40.00 so all is not lost. It's a U8800 but not the -51 or PRO. I don't plan on customizing it, I'll just stick with stock. After trashing two phones even after following the advice to "BACKUP" I think enough is enough. Backing up did me no good whatsoever in both cases.
In my estimation, the culprit is CWM, or at least the versions I used.
If anybody has any advice I'm all ears.
I've tried asking this in the q&a section on the main thread but I think I'm being ignored because I'm asking a question about the at&t version inside a Verizon thread. Idk. But I've tried installing hyperdrive rls15 and I follow the instructions on the main page for at&t and I get to where I need to reboot and wait 10 mins. Well it just stays on the splash screen. I've tried repeating the install 4 time's now amd the same results. I found a tooic saying fix permissions but it fails. I'm sorry if this has been asked already. I have looked through several different threads but I may have overlooked it. My phone baseband is I337UCUAMDL im on 4.2.2 and have twrp v2.5.0.2 as my recovery. I've also verified the md5. any suggestions?
I hate to double post but if anyone has any ideas as to why this is happening I'm going to try and redownload and try loki patch I don't know if it's needed but I will try.
motel6man said:
I hate to double post but if anyone has any ideas as to why this is happening I'm going to try and redownload and try loki patch I don't know if it's needed but I will try.
Click to expand...
Click to collapse
Same problem here,
I'm going to try and install a kernel through TWRP. I've tried a fresh root / loki install, same issue.
For me, I remember having to install an AT&T compatibility pack.zip file on previous Hyperdrive releases, like RLS 10.
I tried to install RLS15 and at the very end of install, it says this:
Flashing Kernel
file_getprop: failed to stat"/tmp/aroma/kernel.prop": No such file or
directory
However, for some reason, after trying to install this new release, I was not able to restore data in TWRP from a backup of RLS 10. I was able to restore to a non-rooted backup (i don't know how), and it appears that I am not rooted anymore, and I don't think I have superuser anymore. So, I'm not exactly sure where to start.
Glad to see I'm not the only one this is happening to. Please let me know if you figure it out. I noticed the same thing but thought I seen someone else say that it was nothing.
so i redownloaded all files and nothing. tried loki patch and nothing. tried kt kernel because i seen another post with someone saying it was the only one that worked for them and nothing. im still stuck on splash screen. please if anyone knows how to fix this please let me know im desperate now. i really want to try this rom so any help would be greatly appreciated. thanks
Same here =/
Flashing a kernel before ROM didn't do anything.
I'm starting to think that we don't have Super User installed anymore, I tried re-installing some BackUps (rooted backups)
and TWRP said something like, you don't have SuperUser instyalled, want to install it? *Slide to Install* Phone quickly reboots (not showing any proof of Super User being installed in TWRP emulator) and still no effect.
When I get some time ill look into how to install SuperUser, which I thought was already put on when we root.
Have you tried installing any other ROMS with success?
Are you still on MDL? I am, and im starting to think i need to just go ahead and do the update from AT&T, and then switching over to Safestrap recovery, but i hope i can find another solution before doing all that.
Sent from my SAMSUNG-SGH-I337 using xda premium
d9vabder said:
Same here =/
Flashing a kernel before ROM didn't do anything.
I'm starting to think that we don't have Super User installed anymore, I tried re-installing some BackUps (rooted backups)
and TWRP said something like, you don't have SuperUser instyalled, want to install it? *Slide to Install* Phone quickly reboots (not showing any proof of Super User being installed in TWRP emulator) and still no effect.
When I get some time ill look into how to install SuperUser, which I thought was already put on when we root.
Have you tried installing any other ROMS with success?
Click to expand...
Click to collapse
I haven't tried any other roms yet. I haven't really seen any that I liked.
d9vabder said:
Are you still on MDL? I am, and im starting to think i need to just go ahead and do the update from AT&T, and then switching over to Safestrap recovery, but i hope i can find another solution before doing all that.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
I'm still on mdl. I'm going to keep looking around for a solution. Please let us know if you found a way to fix it.
Also heres a screen shot of my info
motel6man said:
I've tried asking this in the q&a section on the main thread but I think I'm being ignored because I'm asking a question about the at&t version inside a Verizon thread. Idk. But I've tried installing hyperdrive rls15 and I follow the instructions on the main page for at&t and I get to where I need to reboot and wait 10 mins. Well it just stays on the splash screen. I've tried repeating the install 4 time's now amd the same results. I found a tooic saying fix permissions but it fails. I'm sorry if this has been asked already. I have looked through several different threads but I may have overlooked it. My phone baseband is I337UCUAMDL im on 4.2.2 and have twrp v2.5.0.2 as my recovery. I've also verified the md5. any suggestions?
Click to expand...
Click to collapse
Are you using Safe strap?
I was having the same problem after like 4 tries i figured out that every time I would download this it would go into the internal memory when it should have gone into the xd. I had to move folders manually. After that everything has been working correctly.
Do you know what folders have to be moved and where?
Sent from my SAMSUNG-SGH-I337 using xda premium
d9vabder said:
Do you know what folders have to be moved and where?
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
I created a new one on the xd card named it roms so I won't forget.
All I did was go to Mounts in TWRP recovery and mounted my microSD card and this fixed the problem.
Sent from my SAMSUNG-SGH-I337 using xda premium
d9vabder said:
All I did was go to Mounts in TWRP recovery and mounted my microSD card and this fixed the problem.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
cool im going to go try it in a few mins thanks
i tried mounting both internal and external and still nothing can you go through the steps you did from start to finish maybe im missing something
Okay, so the first thing i did was mount my microSD(external sd) then a full wipe. Even though i was mounted to my sd card, i still had to navigate to my internal memory to select the zips i wanted to flash. I first installed an older release of Hyperdrive Rom, and during installation, i selected Full Wipe option again. i also added my AT&T compatibility pack.zip to be flashed right after the ROM. Also, i dont know if this affected anything, but i tried installing the T-Mobile compatibility pack on a previous attempt. I read somewhere where some1 did this and it worked for them, but it didnt work for me until i did another install of RLS15 and the ATT pack.
Hope this can help you
Sent from my SAMSUNG-SGH-I337 using xda premium