After upgrading from WM 2003SE I have not been able to use my BT stereo headsets. I have both a Motorola S9 and a Jensen WBT212. The music from audio manager or WMP will start but then it will become choppy as if the connection is going on and off every second. Didn't have this issue with WM 2003SE. When used as a handsfree headset there is no issue. I also noticed the elapsed time of the song in progress is also erratic. This happens to both media players. When the BT stereo headsets are not used both players play normally. Anyone else having this issue? Any ideas or resolution would be greatly appreciated.
Device : Siemens SX66(WM6)
ROM Version : 5.60.00 WWE
ROM Date : 03/02/05
Radio Version : 1.15.00
Protocol Version : 1337.45
I finally got the bluetooth headset to work by installing the Helmi BT CAB for WM5 I found in the WM% forum. It is kind of strange now that it seems l;ike there are two BT connection managers but I can now get the headsets to coneect properly and the media players seem to be working properly too.
skipping problem
szfjcr said:
I finally got the bluetooth headset to work by installing the Helmi BT CAB for WM5 I found in the WM% forum. It is kind of strange now that it seems l;ike there are two BT connection managers but I can now get the headsets to coneect properly and the media players seem to be working properly too.
Click to expand...
Click to collapse
Hi I have that weird skipping problem with my HT 820 motorola stereo BT It's not really bad but it shouldn't skip I think. could you send my a link to that cab? any help appreciated.
Thanks Gyurma
BA WM5 Broadcom 1.7.1 Build 3400 Stack (Test) is the title of the thread.
which one?
thank you,but I found it,but there are several patches and stuff over there one of which (BTStack.zip) I do not know how to install which one did you use?
thanks again
Gyuri
Southwing SA505
I got my new BT headphones yesterday. Charged them all day. I did the pairing thing last night. They worked great. Fantastic. The audio was crisp and clear. I was able to answer the phone with them, and again over the phone the audio was great on both ends. But it's like that poem about the girl with the curl. When they're good, they're very, very good. But when they're bad, they're horrid.
I've spent the entire day fighting with the BT. It seems that I can use the headphones only right after I pair them to the device. If I shut them down or turn off BT, when I go to restart, I get the choppiness that's so bad you can't even understand what song is playing. Resetting doesn't fix it. If I uninstall the headphones, turn off BT, and then do a hard reset and reinstall the headphones, I can use them again and everything is perfect. Until I turn them off, and then it starts all over again.
What is causing this?
I know I could just install the Broadcom BT. In fact, I did today. Twice. The problem with that is that I can only get it to recognize the headphones as a high quality audio device, not a headset phone device as well. I can install it as both, but they don't play nice together when I do, and if I install it only as the high quality audio, I can't answer the phone with it. (And yest, I did install all the patches and addons I found throughout that thread.)
Also, the Broadcom audio quality isn't as good as what I'm getting with the MS. Almost like the difference between an mp3 encoded at 96kbps, rather than a better quality.
I've tried the A2DPAudioFix. No help there that I could find.
Am I missing something?
Is it really a choice between crappy audio quality and no phone headset functions and having to hard reset my device over and over?
Same exact problem
Just upgraded the radio today to 1.15 and rom to WM6 last week - Bluetooth stereo headphones work ok for phone but not for music. Please can someone posts links as to where I need to look for various cabs - I've tried searching the forum but am not having much luck. Just happened to stumble on this thread.
Michelle
Stereo bluetooth works now
Well - my dh is sick of me working on this - but I know how BT stereo headphones that work w/ audio and the phone.
I am not even sure what I did other than install every cab I found and I'm sorry I don't have links-
RestartRadio.exe
BroadcomCorp_BT1.0.0.3900.cab
RestartRadio.exe
(still had problem w/ scratchy / stop / start)
then ran
ba_oem_audiogw.cab
and
BroadcomCorp_BTUpdatefor1.0.0.3500.cab
but I don't exactly the order of the last two - I am not even sure I ran the audiogw.cab - anyway, it was like magic - stereo sound minus static and skipping.
This is after flashing to wm6 and flashing the radio to 1.15 - and there was something else I tried - oh, I did change the registry to 64 from 128 I believe - the SD card entry.
Anyway, it's been a long day - now I'm off to figure out how to change the 72M B free in Program to give some to storage which only has 5.48 free.
Michelle
Mgrunk- Which SD card entry did you change? Could you kindly check to see what version of BT you are now on? Start/Settings/Connections/Bluetooth should get you to the version. I have mine working like I described earlier using the HELMI WM5 Broadcomm 1.7 cab, however still have periodic static and skipping. I am curious because my BT headsets worked well with WM2003SE and BroadcomCorp_BT1.0.0.3900.cab. Thanks in advance for any info.
http://forum.xda-developers.com/showthread.php?t=329998&highlight=SDCARD+SDMemory_Class
is the link where I found it.
hklm/drivers/sdcard/clientdrivers/class/sdmemory_class is the entry and it was 128 and I changed it to 64 per another mesage - it did clear up the stuttering problem w/ AudioManager and WMP.
In regards to the version - now I have to BT icons on the Connections page - the About on the second icon says PE "Version 1.0.0 Build 3900"
But last night I deleted AudioManager and then had the horrible BT stereo headphone problems - I also noted while WMP was playing, it sucked the available program memory down to 5M - didn't matter what I started w/
I reinstalled AudioManager - no luck w/ BT, renistalled all the BT cabs
BroadcomCorp_BT1.0.0.3900
BroadcomCorp_BTUpdatefor1.0.0.3500 - oops looks like that probably was unecessary
HTCHeadset_AddOn
ba_oem_audiogw
But, I have persistant problems - if the ppc turns off - when it comes back on, BT icon shows on, but there's no BT. I have to go into CommManager and uncheck handset and headphones, click save, go back and click them back on and click save and then start audiomanager up and play music. But, I found that even w/ that I had to repeat the whole uncheck the services and then recheck them - somehow it's different than turning BT off and then on (that didn't work at all)
*** hey this morning the BT stereo headphones worked fine w/ AudioManager - didn't have to turn anything on or off - once in a while there's a short pause in sound but otherwise it sounds fine.
*** for no reason, BT stereo headphones are back to non-functioning - tried soft reset, reinstall cabs, etc. - no decent sound out of them - of course they work great for BT phone. Any suggestions?
I was a programmer in my former life (before 8 kids) and I design websites, but I was totally frustrated w/ the BT issue - so I'm not being methodical and I didn't really find a definite thread that said do 1, 2, 3 - so I've thrown every cab I can find onto my system.
I'm sure this doesn't help - it's very scattered and unorganized.
Michelle
mgrunk said:
http://forum.xda-developers.com/showthread.php?t=329998&highlight=SDCARD+SDMemory_Class
is the link where I found it.
hklm/drivers/sdcard/clientdrivers/class/sdmemory_class is the entry and it was 128 and I changed it to 64 per another mesage - it did clear up the stuttering problem w/ AudioManager and WMP.
In regards to the version - now I have to BT icons on the Connections page - the About on the second icon says PE "Version 1.0.0 Build 3900"
But last night I deleted AudioManager and then had the horrible BT stereo headphone problems - I also noted while WMP was playing, it sucked the available program memory down to 5M - didn't matter what I started w/
I reinstalled AudioManager - no luck w/ BT, renistalled all the BT cabs
BroadcomCorp_BT1.0.0.3900
BroadcomCorp_BTUpdatefor1.0.0.3500 - oops looks like that probably was unecessary
HTCHeadset_AddOn
ba_oem_audiogw
But, I have persistant problems - if the ppc turns off - when it comes back on, BT icon shows on, but there's no BT. I have to go into CommManager and uncheck handset and headphones, click save, go back and click them back on and click save and then start audiomanager up and play music. But, I found that even w/ that I had to repeat the whole uncheck the services and then recheck them - somehow it's different than turning BT off and then on (that didn't work at all)
*** hey this morning the BT stereo headphones worked fine w/ AudioManager - didn't have to turn anything on or off - once in a while there's a short pause in sound but otherwise it sounds fine.
I was a programmer in my former life (before 8 kids) and I design websites, but I was totally frustrated w/ the BT issue - so I'm not being methodical and I didn't really find a definite thread that said do 1, 2, 3 - so I've thrown every cab I can find onto my system.
I'm sure this doesn't help - it's very scattered and unorganized.
Michelle
Click to expand...
Click to collapse
Mgrunk. what Broadcom do you have installed and where to get it? In WM6.0 there isn't an "about"
meanwhile found the Helmi BT 1.7 but I am getting a insufficient driver memory available. I have to preform a soft-reset which I did but didn't help. Whats is the solution?
Give up
ok, it's back to not working - I'm going to return the stereo BT headphones and wait for a new answer - maybe it's the headphones.
But, in regards to the about screen - I had 2 BT icons on the Connection page and the 2nd one had an about page - I hard reset today and it's gone.
Michelle
Mgrunk- I hard reset a couple of days ago as well just trying to cleanup because having two BT connection managers was bothering me. I have gotten the MS stack to work better by doing the SD card registry edit you suggested and another one at HKLM\software\microsoft\bluetooth\a2dp\settings\bitpool and setting it to 25 then settling to 23. It was at 48 when I started. The lower the number slows down the data transmission rate and reduces the choppiness. The lower the lower the sound quality as well so you will need to adjust on your own. Start with 25 then work your way down. What headset were you using?
Well that worked sort of
I changed those 2 registery values - I had to take the bitrate back to 21 - the sound has really degraded - but the music plays - who knows if it will work tomorrow.
Oh, and I have a set of Spider BT stereo headphones - the people I've called said the sound is fine so the mike works ok and the sound is great for the phone.
They're behind the neck, over the ear as opposed to earbuds but I didn't want wires. The ones I really wanted were $129 - earbuds behind the neck.
Michelle
I've been able to keep my BT headphones working by deleting the entry and forcing them into pairing mode and re-pairing them whenever they get choppy. If I'm careful about how I shut them down and restart them (shut off music, wait until I hear the headphones stop transmitting sound, shut off headphones, shut down BT -> start music, start BT, start headphones) I can use them several times before I have to re-pair them.
But it still seems very weird to have to go through all this crap to use them. If I deviate from that shutdown and restart pattern, I have to re-pair them to get them working properly again. If I do a soft reset, I have to re-pair. It can't be the headphones. They work great with other BT applications.
They do work fantastic when they're working though.
a link from a different forum
http://pdaphonehome.com/forums/ppc-...-rom-only-read-1st-post-before-posting-7.html
so, now I'm off to convert some of my music to mp3 - and then I'm going to try some different players - AudioManager has the same issues w/ wma music as WM10 player - having the bit rate down to 21 really makes for some static in the music.
Update: didn't work - low rate mp3's w/ MortPlayer had same issue
yipppyy
i can fix it ... last night (Sleep on 02.30)
1 Flash WM6
2 disable BT
3 install WM6_SoundFix_.cab
4 install BroadCommPatch1.CAB
5 reset
6 check ... BT maybe cannot to open (i test with garmin mobile)
7 Uninstall BroadCommPatch1.CAB
8 install HELMI_BA_WM5_BT1.7_TEST.CAB
9 Reset
10 .................. Fly ............
if complete .. display menu bt must change same me
All file work with me
download http://www.xbizdomain.com/puchong/pda/BGfixBT.rar
Good Luck
Oh no solution me not work !!!!
i can fix .... Streo headset ... but can't use small talk function..... in bt headset .. have a ring call every time
Lost in China
I have a problem with a Chinese Dopod HS-01 BT Stereo Headset!!!
Phone works, but the Stereo Headset starts for a second or two and then it is gone!
Please, help!
Is there any other solution then to change the registry and the things?
Using: WM6 CE OS 5.2.2000.
No one to ask for help over here!
To all those whose stereo headphone work, but only at BitPool < 25 :
http://forum.xda-developers.com/showthread.php?t=352483
Stefan
Bluetooth works on my Vodafone HTC Magic, but it's a fiddly pain in the arse. Process seems to go something like:
1. Turn on headset
2. Headset connects for phone audio only (music still plays on phone speakers)
3. Go into bluetooth settings, disconnect headset (if it isn't stuck, in which case exit and re-enter settings, or if that doesn't work boot the phone).
4. Re-connect headset (from within settings), which now connects for phone and media audio.
5. Play music, which then often skips for half a second or so about once a minute. If it skips constantly, jump to the next track which usually solves that.
The skipping doesn't always happen, but it does seem to happen regardless of whether I'm at home, work or in a tube station, and whether I've got the phone in my pocket or held up near the headset.
The quality's not bad apart from the skipping, and usually it doesn't skip enough to be truly annoying, but it's still a little disappointing from a £350 phone and a £90 headset.
So, I had the exact same problem, and I may still have it. I have now rooted my phone and applied the sapphire 6.0 update. I'm listening to music right now and it's working fine now with no skips. Having said that, however, I found that sometimes it would work flawlessly before as well.
Anyone have another A2DP device that acts similarly? Or is the problem with the magic.
When I connect eh MM200 to my macbook-pro it sometimes refuses to respond to the button pushing and such. Not sure what exactly that indicates.
/geir
gsjurseth said:
So, I had the exact same problem, and I may still have it. I have now rooted my phone and applied the sapphire 6.0 update. I'm listening to music right now and it's working fine now with no skips. Having said that, however, I found that sometimes it would work flawlessly before as well.
Click to expand...
Click to collapse
I've also rooted and updated to 6.0, still got the problem. I think to be honest it actually pauses rather than skips (I caught it pausing for ~2sec once, it's harder to tell with the shorter "skips")... it still does it when there are few other processes running, so I'm not sure what is bothering it. TBH I've not really tried it playing music without the headset to see if it happens anyway!
I've beemn messing with my phone (Magic) all day try to get the bluetooth to connect to my bluetooth usb dongle or my old phone, both of which work fine together and with everything else,
My PC can find the HTC Magic when i put it in to visable mode, but other then that it wont show up and service's for me to use with the phone,
My old phone (Samsung F700v) cant find the HTC Magic at all, altho i did manage to find the F700 on my Magic and pair them that way but still my F700 wont find it anywhere (with visable mode on,)
Am i missing somthing or does the Magic/Sapphire have a very bad Bluetooth flaw,
on a side note i've only had the phone less then a week and its not rooted, is it worth it? and is there a noob guide to the basic's eg. which version does what and what all the cons are?
Thanks
Edit:
guess i just found my answer...
mrfrank said:
Android does not support any bluetooth services other then "hands free".
This means that you can only use BT headsets.
Android (either G1 or Magic) phones cannot natively send files over BT, cannot use BT a modem, etc...
There is not third party tool so far to send files via BT to other devices.
Click to expand...
Click to collapse
Hi.
I'm using the Ioilite's ability to act as "removable drive" with my car's radio. My radio (Alpine CDE 104 BTI) has a USB port and i can connect the phone to play MP3s stored on the storage card. This works well.
But the radio also has the ability to be used as hands free. When I now connect to the radio via Bluetooth, I can not get any data from the sd-card any more, or the playback is very choppy. It takes for about 1-2 Minutes until it playback has recovered. This also occurs when i do a call. After I hang up and playback continues it is choppy again...
Any Idea why bluetooth is reducing the USB performance?
Thanks
Thomas
Problem you described might be divided into more parts.
At first, when you connect Iolite as removable drive, you cannot access SD card from device. This is common behaviour and you cannot do anything with that.
Secondly, it might be problem on side of your car radio. Maybe it cannot handle playing from USB and serve as BT handsfree at once. Did you try to play some music from USB flash and use BT handsfree at the same time?
Yes, I already tried that. With an usb flash it works without any problems...
Hmm. Will have to live with that....
Thanks anyway...
I finally figured out where those performance problems are coming from.
I had a large list of recent calls which were synchronised with the car radio every time the Iolite connected. So this put down the performance. When I deleted the recent calls list, it worked without any lags.
Just if somone else has those problems...
First a big thank you to dev(s) for their awesome work.
Been using CM10 beta as daily driver on an unlocked aussie RAZR m however there is another possible small bug: when you have a Bluetooth headset connected, phone audio goes to handset but media audio goes to the external speaker no matter what you do.
Anyone else have this?
Sorry couldn't post this in the cm10 thread .
Sometimes this happens to me, even before I rooted, even on my droid 2 global, sometimes a reboot of the phone does it for me or removing the bluetooth profile from the phone then connect it back up does the trick. I have a Insignia NS-BTHDP bluetooth headphones.
I tried this morning to connect my motorcycle helmets BT. Same thing, paired right up, but audio only went out phones speaker
I have a Nexus 4, still running 4.2.1.
I use bluetooth headphones with it which generally work. However, sometime they connect and media sound still comes out the phone speaker,
Disconnecting and reconnecting doesn't help. The awkward trick I've learned is to run the Vonage phone app, and make a phone call, which some how turns the media sound on in the headphone.
There has to be a better workaround than that.
I know there were some bluetooth fixes in 4.2.2, but I don't want to upgrade until I've tested LTE which rumor says is coming next month in Atlanta.
No replies? I can't be the only one seeing this.
I can be a little more definite. It seems that on the first bluetooth connect from an ad2p device after a reboot, media sound still goes to the internal speaker. As I mentioned above I happened on a terrible workaround. If I invoke the vonage app and place a call with it suddenly the bluetooth device takes over the media sound.
It's painful to have to make a call just to kick the bluetooth headphone into media mode.
I don't know if it is the same issue, but my ad2p cuts out sometimes and won't work until a reboot. (It still shows up as working, and sound stops coming from the phone, but...) On 4.2.2 here.
I'll have to give your placing a call trick a try.