[Q] Stuck At samsung logo after formatting internal sd card :((( - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

i wanted to do a complete format to clean my i337'z internal sd card and start fresh. and i chose to do the format from TWRP recovery. After the format it does not go beyond the samsung galaxy s4 logo.
it boots in TWRP and also download mode with key combo.
i flashed different Custom roms, tried all the different wipes but no use.
odin also fails, (AUTH fail) dont know why! Everything fails, Also i tried to Odin with the pit file but all in vain.
and also it says on the download mode Write protection : Enable
Does anyone have any idea What is going on with the device?. i seriously need to get it working. I know it is not dead because all the recovery and download mode is working i m just missing something which your experience can point out.
Thanks guys.

ali.abid said:
i wanted to do a complete format to clean my i337'z internal sd card and start fresh. and i chose to do the format from TWRP recovery. After the format it does not go beyonf the samsung galaxy s4 logo.
it boots in TWRP and also download mode with key combo.
i flashed different Custom roms, tried all the different wipes
odin also fails, (AUTH fail) dont know why!
and also it says on the download mode Write protection : Enable
Does anyone have any idea WTF is going on with the device. i seriously need to get it working. t
Thanks guys.
Click to expand...
Click to collapse
You have to flash everything as of this point I believe. Bootloader, kernal, .tar file, the whole works.

i m using a galaxy s4 canadian variant of i337. so can you please direct me to where can i find ALL the files bootloader, tar etc ?

ali.abid said:
i m using a galaxy s4 canadian variant of i337. so can you please direct me to where can i find ALL the files bootloader, tar etc ?
Click to expand...
Click to collapse
Just use the search bar in the forum it will come up. I'm on my phone or I would screenshot where it is.
Sent from miPhone using XDA Premium HD app

Did you install Kies in your computer? It's needed for some drivers so Odin can work. I was also getting an error until I installed it, then let the computer recognize the phone before clicking start in Odin.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

J
ali.abid said:
i wanted to do a complete format to clean my i337'z internal sd card and start fresh. and i chose to do the format from TWRP recovery. After the format it does not go beyond the samsung galaxy s4 logo.
it boots in TWRP and also download mode with key combo.
i flashed different Custom roms, tried all the different wipes but no use.
odin also fails, (AUTH fail) dont know why! Everything fails, Also i tried to Odin with the pit file but all in vain.
and also it says on the download mode Write protection : Enable
Does anyone have any idea What is going on with the device?. i seriously need to get it working. I know it is not dead because all the recovery and download mode is working i m just missing something which your experience can point out.
Thanks guys.
Click to expand...
Click to collapse
What file in Odin did you try? Where did you get the pit file?

josemald said:
Did you install Kies in your computer? It's needed for some drivers so Odin can work. I was also getting an error until I installed it, then let the computer recognize the phone before clicking start in Odin.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Or you can just download the Samsung drivers from Samsung.com
Sent from miPhone using XDA Premium HD app

agent929 said:
Or you can just download the Samsung drivers from Samsung.com
Sent from miPhone using XDA Premium HD app
Click to expand...
Click to collapse
If he got the odin error he got Odin to recognize the device, so he's got the right drivers.

jd1639 said:
If he got the odin error he got Odin to recognize the device, so he's got the right drivers.
Click to expand...
Click to collapse
I'm sure he does. Some people think you need kies for the drivers. Do you agree with that or do you back my statement?
Sent from miPhone using XDA Premium HD app

agent929 said:
I'm sure he does. Some people think you need kies for the drivers. Do you agree with that or do you back my statement?
Sent from miPhone using XDA Premium HD app
Click to expand...
Click to collapse
The Samsung usb drivers are all you need for Odin.

agent929 said:
Or you can just download the Samsung drivers from Samsung.com
Sent from miPhone using XDA Premium HD app
Click to expand...
Click to collapse
I saw those drivers on the website (for the AT&T version), didn't try them because them are dated November 2012, which means older than the device itself. But if you confirm they work, I'll give them a try. Thanks for the tip. No use in having Kies installed, since I don't use it.

josemald said:
I saw those drivers on the website (for the AT&T version), didn't try them because them are dated November 2012, which means older than the device itself. But if you confirm they work, I'll give them a try. Thanks for the tip. No use in having Kies installed, since I don't use it.
Click to expand...
Click to collapse
Here you go
http://www.modaco.com/topic/361286-...or-mobile-phones-15270-win-87xp-adb-fastboot/
Or search on google for samsung usb drivers.

haremmon said:
Here you go
http://www.modaco.com/topic/361286-...or-mobile-phones-15270-win-87xp-adb-fastboot/
Or search on google for samsung usb drivers.
Click to expand...
Click to collapse
Thank you. Of course it makes sense that the latest drivers are in Modaco and not in samsung.com.

I didn't know that. Used to you could get it right from Samsung.com. I guess that's changed, I haven't researched it.
Sent from miPhone using XDA Premium HD app

Related

Bricked Galaxy S4

This is extremely frustrating.
I successfully rooted my galaxy s4.
I then downloaded CMW and touch, and downloaded this rom: http://forum.xda-developers.com/showthread.php?t=2341376
I then booted into recovery, and wiped etc and then installed the rom. I read on the later part of that page that there wasn't a need for loki so I did not download loki.
I then rebooted, and got the yellow triangle sign saying that the software is not approved by ATT.
This is where I am stuck. I have a mac and am running vmware windows 8.
I tried downloading kies on the mac, and it does not recognize the phone. I did not try kies for windows yet, nor do I know what to do after if I am able to get kies to recognize the s4.
I also downloaded odin, and the firmware, but odin is not recognizing the phone under windows even when I select to use the phone under windows.
I tried the stock usb cable, and a different usb cable, and 2 different usb ports. I do not have a regular windows computer. Is there a way to do this with a mac?
Guess I should have downloaded the loki, is not downloading the loki the whole reason this is happening?
I appreciate everyones help! I just wanted stock android! :good:
I do not have a s4 but have a s2 but its like the same.
1. Why would you not already have Odin installed and kies?! Just in case
2. No backup made?...
3. Can you still get into recovery and download mode if so then you have hope.. wait for someone to give you steps to get out of this
4. If you can't get into either... well :banghead:
Sent from my SPH-D710 using Tapatalk 2
XxlemonxX said:
I do not have a s4 but have a s2 but its like the same.
1. Why would you not already have Odin installed and kies?! Just in case
2. No backup made?...
3. Can you still get into recovery and download mode if so then you have hope.. wait for someone to give you steps to get out of this
4. If you can't get into either... well :banghead:
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Thanks,
1. I have odin and kies installed, they are just not recognizing the phone.
2. I made a backup using titanium backup but not really sure how it works... I've never restored from a backup using titanium
3.Yes I am able to get into download mode by holding the volume, home and power key...
drew1204 said:
Thanks,
1. I have odin and kies installed, they are just not recognizing the phone.
2. I made a backup using titanium backup but not really sure how it works... I've never restored from a backup using titanium
3.Yes I am able to get into download mode by holding the volume, home and power key...
Click to expand...
Click to collapse
Mmm alright... Go into download mode and take out your SD card and download the Loki file in the ROM thread then transfer to sdcard on PC. Then place back in phone.. Then go intro recovery and flash the file and it should work.
But wait before anything can you get into recovery? If so then you go to mounts and storage and mount sdcard and transfer the Loki file from your PC right there.
Sent from my SPH-D710 using Tapatalk 2
I have installed kies on the windows version and it notices the phone is connected, but it just keeps saying "connecting..." and a little thing spinning. Not sure how long it should take to connect...
why not download the loki zip to sd card, then put back on phone, reboot to recovery and install from sd card...
XxlemonxX said:
Mmm alright... Go into download mode and take out your SD card and download the Loki file in the ROM thread then transfer to sdcard on PC. Then place back in phone.. Then go intro recovery and flash the file and it should work.
But wait before anything can you get into recovery? If so then you go to mounts and storage and mount sdcard and transfer the Loki file from your PC right there.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Yes I can boot into recovery.
Wow I didn't even think of that... Sorry I am a noob.
Okay I fixed it (you fixed it thank you so much!) I booted into recovery, and then into the zip file and installed loki, and all is well.
STOCK ANDROID!!! Whew that was scary...
drew1204 said:
Yes I can boot into recovery.
Wow I didn't even think of that... Sorry I am a noob.
Okay I fixed it (you fixed it thank you so much!) I booted into recovery, and then into the zip file and installed loki, and all is well.
STOCK ANDROID!!! Whew that was scary...
Click to expand...
Click to collapse
Welcome
Sent from my SPH-D710 using Tapatalk 2
XxlemonxX said:
Welcome
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Because noobs don't get it.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Because noobs don't get it.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Cool
drew1204 said:
Cool
Click to expand...
Click to collapse
You could thank him for helping you. Or is that too hard for you? There's even a thanks button to make it easy
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
You could thank him for helping you. Or is that too hard for you? There's even a thanks button to make it easy
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Mate don't be so arrogant, he did thank him.
Sent from my GT-I9305 using xda premium
ozgame said:
Mate don't be so arrogant, he did thank him.
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
Mate,I don't see that
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
drew1204 said:
Yes I can boot into recovery.
Wow I didn't even think of that... Sorry I am a noob.
Okay I fixed it (you fixed it thank you so much!) I booted into recovery, and then into the zip file and installed loki, and all is well.
STOCK ANDROID!!! Whew that was scary...
Click to expand...
Click to collapse
the OP of that ROM lists these specific installation instructions:
HOW TO INSTALL:
* Download the ROM (NO NEED FOR GAPPS)
* Reboot to Recovery
* Wipe data/factory reset
* Flash the ROM
* U.S. MODELS - Flash Loki Patch - http://tau.shadowchild.nl/files/loki-doki.zip (CANADIAN USERS DO NOT INSTALL)
* Reboot your Galaxy S4
* Enjoy
remember to read everything first and understand what you are doing before proceeding. cheers
And only 5 simple steps. One sec of reading. And it matters. Or kaboom.

Odin not recognizing s4

My computer recognizes my phone and can transfer files and everything but odin will not. Using original cable too. Neitger of my gs4 will work with odin. Tried installing the correct drivers also. They literally tried installing for about 5 hours and still wouldn't work. Any ideas?
Sent from my SPH-L720 using xda app-developers app
Make sure you're on odin 3.x and get your file and everything loaded and ready, then plug in the phone while in download mode. That's the way it works for me.
Sent from my SPH-L720 using xda premium
Yep that's what I've tried. No luck
Sent from my SPH-L720 using xda app-developers app
Try different USB ports/cables. Or another laptop.
Sent from my SPH-L720 using Tapatalk 4 Beta
Try odin v1.85. It works for me everytime
Sent from my SPH-L720 using xda app-developers app
ROMANTiC KiD said:
Try odin v1.85. It works for me everytime
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
1.85 here too. Give that a shot
Sent from my SPH-L720 using xda app-developers app
sandman121383 said:
1.85 here too. Give that a shot
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
So im still not having luck getting odin to recognize my phone in download mode. I am using 1.85. This is the longest ive gone without a rooted phone. I hate it.
greeneperson said:
So im still not having luck getting odin to recognize my phone in download mode. I am using 1.85. This is the longest ive gone without a rooted phone. I hate it.
Click to expand...
Click to collapse
Try different usb ports, different usb cables, re installing drivers and rebooting the computer to see if it helps
Sent from my SPH-L720 using xda app-developers app
after many tests
after many many tests, difference original cables, differente PCs, differente ODINs,
the probleme was the download mode, iused to use the UP VOLUME ,
but when when i just used the down volume AND VOILA !!!!! oding detected my phone.....
vreality-one said:
after many many tests, difference original cables, differente PCs, differente ODINs,
the probleme was the download mode, iused to use the UP VOLUME ,
but when when i just used the down volume AND VOILA !!!!! oding detected my phone.....
Click to expand...
Click to collapse
:silly: lol
anyway, I had the same problem but WITH the down menu.so not a solution for me.
Just write here for any future needs -- I uninstalled the drivers from the device manager, as it was showing one "Samsung blabla device"
after reinstalling the drivers (google SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.9.0.exe)
it detected 2 devices in Odin mode (down+up+power) "Samsung modem" and "Samsung blabla2..."
so now it detected all OK
Possible solution
Hi, I can have found the solution for this, when i conected the galaxy S4 to the computer (already on Download Mode) it pops out a message saying that the driver could not be installed, I went to the advenced and clicked on the option "Yes" and then after a while a looked to Odin 3.09 and it was with the BLUE rectangle.
Hope you understand!! Thank you all!
Lucas

[Q] Help Bricked I9505

I think I've bricked my I9505. I accidentally wiped phone without putting new ROM on SD card. Now I can only go to TWRP or download mode. Also my SD Card isn't showing up on my computer, is there anything i can do?
MDi24 said:
I think I've bricked my I9505. I accidentally wiped phone without putting new ROM on SD card. Now I can only go to TWRP or download mode. Also my SD Card isn't showing up on my computer, is there anything i can do?
Click to expand...
Click to collapse
connect via download mode, and flash original rom via odin
connect via download mode, and flash original rom via odin
Click to expand...
Click to collapse
I tried it but it said failed
is there any way to get my computer to recognize my phone?
Put a ROM on ext SD card using computer and a card reader and flash in TWRP
Sent from my GT-I9505 using XDA Premium HD app
Obagleyfreer said:
Put a ROM on ext SD card using computer and a card reader and flash in TWRP
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
I tried that and now after restarting my phone i cant get into TWRP. when i try get into recovery it says "firmware upgrade encountered an issue please select recovery mode in kies".
The only thing i can do is get in download mode, but my computer wont recognize the phone.
Has your computer got samsung driver correctly installed if not reinstall them then try again. ..or use another computer
Sent from my GT-I9505 using xda app-developers app
frnkly said:
Has your computer got samsung driver correctly installed if not reinstall them then try again. ..or use another computer
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
tried a different usb port and my computer recognised it, however i could only add TWRP with odin i couldn't flash the stock rom, it says failed. It also fails when i try to flash in TWRP itself.
Its very strange that you can goto recovery or download mode but phone not complete flash....good news is you have not completey bricked your phone phone cause you can still flash and enter recovery try lastest firmware na5 is leaked but newest. ...or try custom rom...philz recovery may work....also what rom are you trying to flash
Also a screen capture of odin when you get error as well wil help...
Sent from my GT-I9505 using xda app-developers app
frnkly said:
Its very strange that you can goto recovery or download mode but phone not complete flash....good news is you have not completey bricked your phone phone cause you can still flash and enter recovery try lastest firmware na5 is leaked but newest. ...or try custom rom...philz recovery may work....also what rom are you trying to flash
Also a screen capture of odin when you get error as well wil help...
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
I was trying to install Galaxy S4 stock rom, i'd been using Jamal's 4.3 Google Edition rom. I tried flashing the 4.3 rom again and that was succesful and it seems to be working..
Excellent then hopes all goes well
Sent from my GT-I9505 using xda app-developers app
frnkly said:
Excellent then hopes all goes well
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
thanks,
only thing is it says i have only 3.06GB / 9GB available storage and there is nothing listed that is taking up 6GB of space

Trouble Updating S4 AT&T

So I've had this problem for a while and I think at one point I knew what the issue was, but things came up and I guess I lost my place. I have a GS4 running 4.3 on AT&T, but if I recall correctly it took a long time (longer than it was supposed to in US) for even that update to become available to me. I'm not sure if this phone is set as a different country or something, but I seem to think that had something to do with it when I checked last time. Now when I check for updates, it does say I have an available update (KitKat?) but fails when attempting to update. Download is successful, but install is not. Baseband is I337ucuemk2 if that helps anything. Any help here would be appreciated, thanks.
Install is failing as some of the files it is trying to update has been modified. You would have to be on stock for the update to work.
Remember that there is no direct root method for KitKat yet.
http://forum.xda-developers.com/showthread.php?t=2616221 for more info
Sent from my GT-I9505 using Tapatalk
jmjoyas said:
Install is failing as some of the files it is trying to update has been modified. You would have to be on stock for the update to work.
Remember that there is no direct root method for KitKat yet.
http://forum.xda-developers.com/showthread.php?t=2616221 for more info
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
I'm actually not rooted, already stock and still having errors still...any idea why that would be?
Anyone have any advice?
Anyone have any advice?
Click to expand...
Click to collapse
Have you changed any system files and do you have xposed running? They'll break the ota.
Edit, I should have read closer. I think there is an update.zip file you could flash in the general forum. I'll look and see if I can find it.
See post 2 http://forum.xda-developers.com/showthread.php?p=50667360
Sent from my Nexus 5
jd1639 said:
Have you changed any system files and do you have xposed running? They'll break the ota.
Edit, I should have read closer. I think there is an update.zip file you could flash in the general forum. I'll look and see if I can find it.
See post 2 http://forum.xda-developers.com/showthread.php?p=50667360
Sent from my Nexus 5
Click to expand...
Click to collapse
Thanks for the link, so I should just flash the md5 with Odin? Appreciate the help.
Imnice777 said:
Thanks for the link, so I should just flash the md5 with Odin? Appreciate the help.
Click to expand...
Click to collapse
No, flash the update.zip in the stock recovery
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
No, flash the update.zip in the stock recovery
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Ok cool, thanks again...however now another issue. I've tried several times, I can not boot into recovery. Any time I try to the phone just goes black until I let go and then reboots. Even if I get the blue print in the top left, the phone does not boot into recovery. Any idea why this would be?
Imnice777 said:
Ok cool, thanks again...however now another issue. I've tried several times, I can not boot into recovery. Any time I try to the phone just goes black until I let go and then reboots. Even if I get the blue print in the top left, the phone does not boot into recovery. Any idea why this would be?
Click to expand...
Click to collapse
If you can get into download mode you may be better off flashing the md5 and Odin. Don't know why you can't get into recovery
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
If you can get into download mode you may be better off flashing the md5 and Odin. Don't know why you can't get into recovery
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Me either, guess I'd just flash normally like I would a rom? Or would an update be different. I haven't done this in a while.
Imnice777 said:
Me either, guess I'd just flash normally like I would a rom? Or would an update be different. I haven't done this in a while.
Click to expand...
Click to collapse
If you flash the tar in Odin it's going to wipe your device so backup what you can. You'll need to download the tar file to your pc and download Odin to it too if you don't already have it. You run Odin from the pc
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
If you flash the tar in Odin it's going to wipe your device so backup what you can. You'll need to download the tar file to your pc and download Odin to it too if you don't already have it. You run Odin from the pc
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Ok so I finally got into recovery, but am I supposed to rename the file or anything? It keeps telling me:
"-- Verify the file type of MD5, Before Install /sdcard ...
-- Install /sdcard"
Imnice777 said:
Ok so I finally got into recovery, but am I supposed to rename the file or anything? It keeps telling me:
"-- Verify the file type of MD5, Before Install /sdcard ...
-- Install /sdcard"
Click to expand...
Click to collapse
Anyone ever see that error before?
Imnice777 said:
Anyone ever see that error before?
Click to expand...
Click to collapse
Are you trying to flash the update.zip? I'd re-download it. It could be a bad download
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Are you trying to flash the update.zip? I'd re-download it. It could be a bad download
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
So... pretty unhappy. Downloaded the update.zip and flashed in stock recovery, it wiped my whole phone and still didn't update. I saw a couple error messages appear as it was "updating" so now I'm still on old firmware and lost everything on my phone. Luckily I did a Kies backup but still pretty ridiculous. I still lose all save data from apps and all convenience that there was from using my phone for as long as I did. Just wanted to update, shouldn't be this big of a mess. Not sure what to do next.
Imnice777 said:
So... pretty unhappy. Downloaded the update.zip and flashed in stock recovery, it wiped my whole phone and still didn't update. I saw a couple error messages appear as it was "updating" so now I'm still on old firmware and lost everything on my phone. Luckily I did a Kies backup but still pretty ridiculous. I still lose all save data from apps and all convenience that there was from using my phone for as long as I did. Just wanted to update, shouldn't be this big of a mess. Not sure what to do next.
Click to expand...
Click to collapse
Well that sucks. No idea how it works wipe you're device. It shouldn't touch the userdata. If it's truly wiped I'd Odin the nb1 tar at this point. Get it updated and start over
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Well that sucks. No idea how it works wipe you're device. It shouldn't touch the userdata. If it's truly wiped I'd Odin the nb1 tar at this point. Get it updated and start over
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
That's what I did and I'm finally updated, but pretty disappointed that it took all that just for an update. Hopefully things like that don't continue in future updates...

Stuck on boot, need some help

ok, so I am not a noob on rooting and such, but this one has me stumped. Have the i337 on mdl baseband. Wanted to return it to stock. I tried to Odin (v3.09) the factory tar from the samsung site, i got a failure, then it went to recovery mode saying to connect kies. I have tried kies 2.6 and 3.0, neither recognize the device. I have tried redownloading samsung firmware thinking it was corrupted and mk2 firmwares in odin, neither worked, they go immediately to fail when i try to execute Odin. I can get into download mode or the kies recovery mode, not sure what to do since it will not take odin. Any ideas?
aawshads said:
ok, so I am not a noob on rooting and such, but this one has me stumped. Have the i337 on mdl baseband. Wanted to return it to stock. I tried to Odin (v3.09) the factory tar from the samsung site, i got a failure, then it went to recovery mode saying to connect kies. I have tried kies 2.6 and 3.0, neither recognize the device. I have tried redownloading samsung firmware thinking it was corrupted and mk2 firmwares in odin, neither worked, they go immediately to fail when i try to execute Odin. I can get into download mode or the kies recovery mode, not sure what to do since it will not take odin. Any ideas?
Click to expand...
Click to collapse
1. Kies and Recovery mode aren't same thing. Kies never will recognize your device being in Stock Recovery Mode. Don't mix things.
2. Find the error now is difficult coz maybe you update your bootloader with the MK2 firmware (that's android 4.3 no android 4.2.2).
3. Get me the errors or one screenshot that appears in ODIN when you try to flash the MK2 firmware pls.
I'll see what I can do, it happens so fast I don't think anything updates, and it shows me no errors, just fail
Sent from my SM-T320 using XDA Free mobile app
aawshads said:
I'll see what I can do, it happens so fast I don't think anything updates, and it shows me no errors, just fail
Sent from my SM-T320 using XDA Free mobile app
Click to expand...
Click to collapse
Maybe Kies was in your task bar when you tried to flash through ODIN?
Not the first but maybe the last ones, what does that do?
Sent from my SM-T320 using XDA Free mobile app
aawshads said:
Not the first but maybe the last ones, what does that do?
Sent from my SM-T320 using XDA Free mobile app
Click to expand...
Click to collapse
Close completely Kies before run ODIN and try again to flash the old bootloader. Tell me how works
Joku1981 said:
Close completely Kies before run ODIN and try again to flash the old bootloader. Tell me how works
Click to expand...
Click to collapse
ok, ran it, failed again, hereare the screenshots with the complete message portion.
aawshads said:
ok, ran it, failed again, hereare the screenshots with the complete message portion.
Click to expand...
Click to collapse
1. Try other version of ODIN. I recommend you the latest one -> HERE
2. And pls.... MK2 isn't firmware for your device, it's for i337M. Don't mix things. Flash MDL again if you had that baseband and show me what errors you will have in ODIN. Good luck
Still failed. Let me know what you see. thanks
Bump, anyone see what I is wrong?
Sent from my SM-T320 using XDA Free mobile app
aawshads said:
Bump, anyone see what I is wrong?
Sent from my SM-T320 using XDA Free mobile app
Click to expand...
Click to collapse
Are you sure you're on the mdl bootloader?
Sent from my Nexus 5 using XDA Free mobile app
Pit file
I see youre trying to flash the mk2 file but you dont have the pit file for the repartition head over here and download the mk2 pit file and then rerun it I also see that you have auto reboot checked, uncheck the auto reboot and then once iit finishes flashing and say reset unpluget you're device and pull the battery then put it back in and go into stock recovery by holding volume up power and home all at the same time and wipe data factory reset and cache partition http://d-h.st/5gz
Thanks, but that did not work either. I have never had a problem I couldn't odin out of, but I have tried everything I can think of and still nothing will work. I just want to sell the phone so I even tried the nb1 which should install no matter what bootloader I am on, and still nothing.

Categories

Resources