helllo every body
i have a problem.i was updating my galaxy s through samsung kies..it got stucked after 30%..i disconnected it n then tried to update through odin multiloader..again it got stuck.i tried twice n it got stuck..now the phone goes to download mode..but cant be detected by computer..can any body help me plz
do you have another PC?
it's your windows + PC problem
best way is on WinXP 32bit on a good PC with working USB ports
some PC have buggy USB ports
unplug everything else from the USB ports except for mouse and keyboard (in case they are USB mouse/keyb)
Hello,
Update: For solution see my last two posts here.
today I installed the current nightly from here: http://defy.wdscript.fr/defy-cm9/
on my red lens defy (standard, not plus) along with the CM7 kernel.
Before I had CM7.1 on it. Now I cannot connect the phone via USB anymore. Nothing does happen. The settings are all correct (usb debugging enabled etc.).
Could someone recommend a CM9 build for the red lens defy which has working usb mass storage/debug ? I would rather not want to test 100 builds for working usb :S
Thanks in advance!
tdlr said:
Hello,
today I installed the current nightly from here: http://defy.wdscript.fr/defy-cm9/
on my red lens defy (standard, not plus) along with the CM7 kernel.
Before I had CM7.1 on it. Now I cannot connect the phone via USB anymore. Nothing does happen. The settings are all correct (usb debugging enabled etc.).
Could someone recommend a CM9 build for the red lens defy which has working usb mass storage/debug ? I would rather not want to test 100 builds for working usb :S
Thanks in advance!
Click to expand...
Click to collapse
The USB has been working fine for me with Epsylon3's builds since.. as long as I can remember...
Does it charge via USB? i.e not in the computer?
pk92 said:
Does it charge via USB? i.e not in the computer?
Click to expand...
Click to collapse
It does charge via USB on PC and via USB on power adapter. This is not the problem. The problem is, that except charging nothing happens when I connect the phone to the PC. No notification where I could choose portals/mass storage etc.
No hardware popup under windows. On the PC I have Motorola drivers which were working fine with CM 7.1 just before.
tdlr said:
It does charge via USB on PC and via USB on power adapter. This is not the problem. The problem is, that except charging nothing happens when I connect the phone to the PC. No notification where I could choose portals/mass storage etc.
No hardware popup under windows. On the PC I have Motorola drivers which were working fine with CM 7.1 just before.
Click to expand...
Click to collapse
check in /system/app if Usb.apk is present or not?
generally its there in all cm9 build. ur case is strange.
brajesh.sharma87 said:
check in /system/app if Usb.apk is present or not?
generally its there in all cm9 build. ur case is strange.
Click to expand...
Click to collapse
Yes it is there.
Should the same usb drivers that worked for 7.1 still work under 9.x?
Edit: I updated the motorola drivers and nothing changed.
Also @pk92:
Which build are you running, maybe USB just doesn't work in the most recent nightlies ?
Edit: Tried 3 nightlies now. Not a single one does work. Tried two different pc's too. Reinstalled motorola drivers on both. I'm clueless.
Edit 2: Also, if I disable USB debug and then reboot, it is enabled again.
Edit 3: I just enabled ADB over network as this is the feature I need the most. I did connect via ADB while the phone was plugged in to USB and right when it connected via wifi windows popped up a hardware dialog along the lines "Unknown device, installation failed."
Edit 19638746278: After reinstalling the motorola drivers once again and reflashing the latest nightly the phone does not even charge anymore via PC USB. Instead, I just get the hardware popup with "unknown device" which reports that it's "not working".
I wonder about the suspicious timing and also I wonder why it says "usb device not recognized" (freely translated from german)
tdlr said:
Also @pk92:
Which build are you running, maybe USB just doesn't work in the most recent nightlies ?
Click to expand...
Click to collapse
I have the same issue - USB is dead (expect for charging)...
BUT: It worked yesterday evening and today morning, no idea what went wrong...
Same problem here.
All of the sudden it tries to install an MTP USB Device.
Which fails here.
For everyone with a RED LENSE defy (DON'T TRY WITH GREEN), here is a workaround:
Install the latest nightly for Defy PLUS along with the CM9 Kernel and reset battery stats. Nothing changes except USB does work again (at least for me).
Edit: see next post for MTP fix.
New post for clarity:
You then can fix the USB mass storage / MTP by following the instructions of the first post here:
http://forum.xda-developers.com/showthread.php?t=1432100&page=429
Has anyone seen this before? I connect my usb cable from my phone to my PC, and I get this error. The phone will not show up in my computer.
MTP USB device shows a yellow exclamation point in device manager. Gives a code 10, device cannot start error.
Samsung USB driver 1..5.45 is installed.
Hi
my phone is running blisspop , cmw touch is installed . when i try to connect my phone to my PC , error message saying USB device not recognized , and saying device is malfunctioned.
i tried everything.
tried my phone with my friends laptop
changed usb cable
tried same usb with my friends G2 which is working fine. so this is not issue with USB cable.
so i tried to flash kdz to get rid of problem, i entered my phone "Download mode" my pc still displaying same error message.
is it hardware related issue?
It could be a hardware problem. I'm going through a similar case (but it's not a hardware issue though). By default you shold turn off the phone, connect the usb to the PC (not the phone) and then Hold Vol+ and Power, Until you see it entered download mode, THEN you plug the USB port to the phone.
install driver
So I have this strange issue, when i connect my phone windows says "Usb device not recognized" and my phone is just charging without any notification for file transfer option. even tried usb debugging no results. When connected in fastboot mode windows doesnt even show usb device not recognized. no action in windows. I have tried almost all basic fixes and also have replaced the entire charging board. The bootloader is locked.... and i wanted to mod the phone but unfortunately it doesnt connect to pc.