hello everyone
I have my htc hd2 several times already reinstalled with android,
Until recently, no problems but now after installing setup by rebooting I went to see internal storage 0.0 B free therefore can not install apps.
Have different android versions even tried it first did.
When I go back to windows I see free internal memory.
I also used MTTY_ver_1.42 and badblock that I had got away.
Do hspl 2.08, radio 2.15, magldr 1.13, cwm-recovery 5.0.2.6.
android versions I have tried are:
NexusHD2-Gingerbread_V3.3a-(Android 2.3.7)
TouchWizMOD_v2.1
NexusHD2-Jelly Bean-CM10.1_V2.4
One-S v1.1
Slimroms_LeoV8.0.
Who can help me?
What is your setup? Are you using "DataOnEXT"? NativeSD? Do you have an EXT partition on your sdcard? What's the system partition you created?
Marvlesz said:
What is your setup? Are you using "DataOnEXT"? NativeSD? Do you have an EXT partition on your sdcard? What's the system partition you created?
Click to expand...
Click to collapse
I use DataOnExt have ext4 partition of 4Gb system partition of 400 MB cache 5Mb sd card 32Gb.
agt925 said:
I use DataOnExt have ext4 partition of 4Gb system partition of 400 MB cache 5Mb sd card 32Gb.
Click to expand...
Click to collapse
Resize your system partition to 300 and try again.
Marvlesz said:
Resize your system partition to 300 and try again.
Click to expand...
Click to collapse
I've tried a system-size of 300 Mb, but remains the same
0.0 Kb internal memory still no app installed
agt925 said:
I've tried a system-size of 300 Mb, but remains the same
0.0 Kb internal memory still no app installed
Click to expand...
Click to collapse
Wait, what do you mean by "go back to windows"? How do you have windows and still able to install android in the NAND?
I mean back to the original ROM install windows again.
When I look at memory I see that there is free memory.
If I then continue walking to android is set up from the outset, I see all the steps after the installation of internal memory 0.0 Kb
agt925 said:
I mean back to the original ROM install windows again.
When I look at memory I see that there is free memory.
If I then continue walking to android is set up from the outset, I see all the steps after the installation of internal memory 0.0 Kb
Click to expand...
Click to collapse
... I'm confused.. Where exactly do you see this 0kb? And why are you even looking at it? And why would you even flash WinMo after having Android? They have don't share internals. In fact, installing WinMo erases Android and its bootloaders. (Unless you're running NativeSD, which yet again, resides in the sd card and is NOT affected by the internal storage)
If you can't install apps, maybe the 4GB partition is full? (though I doubt that)
But have you tried a fresh install? (formatted SD card, all partitions?)
if I have installed android and I look at settings and memory than I see in internal memory 0 Kb stand when I want to download an app I get the message that I have no free internal memory.
The reason I had installed the original windowsrom was because I wanted to completely put out android again, I had the idea that it might be good what went sadly was not.
I formatted my sd card several times already and ext4 partition remains the same.
I also tried native but also the same.
agt925 said:
if I have installed android and I look at settings and memory than I see in internal memory 0 Kb stand when I want to download an app I get the message that I have no free internal memory.
The reason I had installed the original windowsrom was because I wanted to completely put out android again, I had the idea that it might be good what went sadly was not.
I formatted my sd card several times already and ext4 partition remains the same.
I also tried native but also the same.
Click to expand...
Click to collapse
Your problem is weird, it's not common. You must be doing something wrong but I fail to figure out what. I searched but all I could find is "resize partition, format and reflash" and "thank you! everything works now!".
Try this: http://forum.xda-developers.com/showpost.php?p=38960831&postcount=5
EDIT:
What do you mean by "ext4 partition remains the same" ? You must format that as well using A PC.
Marvlesz said:
Your problem is weird, it's not common. You must be doing something wrong but I fail to figure out what. I searched but all I could find is "resize partition, format and reflash" and "thank you! everything works now!".
Try this: http://forum.xda-developers.com/showpost.php?p=38960831&postcount=5
EDIT:
What do you mean by "ext4 partition remains the same" ? You must format that as well using A PC.
Click to expand...
Click to collapse
I use my PC to an ext4 partition to get the message but can not mount during install, I use mini tool partition wizard.
I have tried TWRP recovery.
But unfortunately still not the solution
OK, try this: Completely format the sd card and create only 1 FAT32 partition, don't create an EXT partition. Now insert the card into your phone and boot into recovery, go to "Partition SD card" and choose 2GB and (if asked) choose ext4. Choose 0 swap and select OK/next.
Now make sure your NAND is partitioned correctly (system & cache), then copy the ROM and flash it from recovery, choose DataOnExt. Report back.
I made 1 partition on my sd card of 32Gb. made there in TWRP after 1 ext4 partition of 4GB nand to due to the overview of the android ROM.
misc ya 1M
recovery rrecov | ro | nospr filesize recovery raw.img
boat yboot | ro 5M
system ya 200M
cache ya 5M
userdata ya | asize | hr Allsize
NexusHD2-Jellybean-CM10.1_V2.4 installed.
but unfortunately.
agt925 said:
I made 1 partition on my sd card of 32Gb. made there in TWRP after 1 ext4 partition of 4GB nand to due to the overview of the android ROM.
misc ya 1M
recovery rrecov | ro | nospr filesize recovery raw.img
boat yboot | ro 5M
system ya 200M
cache ya 5M
userdata ya | asize | hr Allsize
NexusHD2-Jellybean-CM10.1_V2.4 installed.
but unfortunately.
Click to expand...
Click to collapse
Okay, now I have no more ideas. If you're doing everything right, it should work immediately. Here is a quick guide on how to install android nand. I'm sorry, that's all I could do, I couldn't help.
You should wait for other suggestions, but in the meantime you can follow that guide and see if it works.
Marvlesz said:
Okay, now I have no more ideas. If you're doing everything right, it should work immediately. Here is a quick guide on how to install android nand. I'm sorry, that's all I could do, I couldn't help.
You should wait for other suggestions, but in the meantime you can follow that guide and see if it works.
Click to expand...
Click to collapse
no problem thanks for thinking I continue to try things.
I tell you when I'm moved forward
Yet again been trying.
What I noticed is that when I look at internal memory he says 0.0 Kb and when I look at apps and then run I see at 192 Mb ram used 219Mb free.
Now I understand there is nothing more of who can help me?
agt925 said:
Yet again been trying.
What I noticed is that when I look at internal memory he says 0.0 Kb and when I look at apps and then run I see at 192 Mb ram used 219Mb free.
Now I understand there is nothing more of who can help me?
Click to expand...
Click to collapse
No, the RAM has nothing to do with your internal. Have you followed the guide I linked you to?
Also, try to delete an app (a preferably big one) and see if your NAND gets any more free.
Related
Its not opening anything..
Followed the guide.. Help!!!
Hegemor said:
Its not opening anything..
Followed the guide.. Help!!!
Click to expand...
Click to collapse
Do you have HardSPL 2.08 and a new 2.**.50.** Radio flashed?
What version of Magldr do you have?
Are you trying to install a Magldr (*.exe) or ClockworkMod (*.zip) Rom?
Please list EXACTLY what you did and what happened as the information you gave doesnt tell us anything.
Mark.
As I was answering you question I realised that i have used the wrong android file, so Now its working... hehe..
The only problem is now the storage on the phone, ther is almost no space on the phone... When I set up active sync on my phon, will the emails take place in the phone or the SD card?
Hegemor said:
The only problem is now the storage on the phone, ther is almost no space on the phone... When I set up active sync on my phon, will the emails take place in the phone or the SD card?
Click to expand...
Click to collapse
I think the low storage issue is most probably coz of your /system partiton (400mb cfg file?). Now I don't know what size your roms /system cfg file should be (next time link to your rom, makes it easier for us to solve your problem), therefore I can't give an accurate answer right now, but to increase space you either have to find what /system your rom uses and flash cfg accordingly or make an EXT2/3/4 partiton on your sd card and use a2sd.
azer0 said:
I think the low storage issue is most probably coz of your /system partiton (400mb cfg file?). Now I don't know what size your roms /system cfg file should be (next time link to your rom, makes it easier for us to solve your problem), therefore I can't give an accurate answer right now, but to increase space you either have to find what /system your rom uses and flash cfg accordingly or make an EXT2/3/4 partiton on your sd card and use a2sd.
Click to expand...
Click to collapse
I have the Desire version on my HD2, and i dont have Apps2SD.
I made partitions on my SD card (FAR32 of 6.5GB and EXT3 of 1GB).
What do you mean with: "use a2sd" and "flash cfg"?
Ok, as far as I can tell this is the rom you are using http://forum.xda-developers.com/showthread.php?t=1010498?
Did you follow the exact instructions in post 2? Its seems that you forgot to edit flash.cfg file. Do a fresh install following the guide in in post 2, word by word.
I did not change the flash file..
it says:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 8M
system ya 120M
cache ya 8M
userdata ya|asize|hr allsize
Witch step do I start from?
I used this guide
http://forum.xda-developers.com/showthread.php?t=1013852
According to your rom.s thread you'd need to edit this line system ya 120M to system ya 150 from your flash.cfg and reflash hope that'll help. One more thing to use sd-ext partition download data2ext from the same page.
I now did it over again, but still have low space..
I think I even have less internal space now...
only 172 mb
Can you explain "to use sd-ext partition download data2ext from the same page." in a way a girl can understand?
That's it, there wont be more than that, maybe if you tweaked the flash.cfg you'd get ~50M more. That's where you sd-ext will come into play, its the same as your internal space but hosted in your SD, and that's where your apps and data will be stored, instead of the actual interal memory.
azer0 said:
That's it, there wont be more than that, maybe if you tweaked the flash.cfg you'd get ~50M more. That's where you sd-ext will come into play, its the same as your internal space but hosted in your SD, and that's where your apps and data will be stored, instead of the actual interal memory.
Click to expand...
Click to collapse
But how can I tweak that file... so I get more space..
Im so confused...
Sorry for all the stupid questions...
If you implement sd-ext then you don't need the extra space coz your ext2/3/4 will be used instead. As for data2sd, I think the rom you are using has a2sd, which means that if you had setup an ext2/3/4 then a2sd will automatically detect you ext partition and will install all your apps there (ext partition).
In any case here is a link to increase internal memory http://forum.xda-developers.com/showpost.php?p=11189394&postcount=1826, now this is rom specific and I don't know if it'll work with your rom.
Ok I tried to ext sd card to 2048M and chose swap size 0M hope that will work..
MY SD card is 16gb
But it says please wait and have been like this for a long time now..
I did it!!!! Who would have known that a girl could do this!!
Thank you so much for the help!!!
Hegemor said:
I did it!!!! Who would have known that a girl could do this!!
Thank you so much for the help!!!
Click to expand...
Click to collapse
Gad you got it all working in the end
Mark.
Hegemor said:
I did it!!!! Who would have known that a girl could do this!!
Thank you so much for the help!!!
Click to expand...
Click to collapse
Hurrah. Nice to know that u got it working, in the end that's all it matters. Have fun.
Hi, I recently installed NAND android build and I'm facing similar problem which I had on SD (this happened to me just 1 out of 3 sd builds). When I want to change my wallpaper (stock walls), I get only few thumbnails and I'm able to set wall only from those which get one. When clicking on those without thumbnails, phone says that my storage is full, although it's a clean and fresh install. Does anybody know what to do about it? Thanks
what build did you install?
NAND is HD2 CoreDroid Desire HD GB V2...and before I used SD MccM 4.5
Danibor said:
Hi, I recently installed NAND android build and I'm facing similar problem which I had on SD (this happened to me just 1 out of 3 sd builds). When I want to change my wallpaper (stock walls), I get only few thumbnails and I'm able to set wall only from those which get one. When clicking on those without thumbnails, phone says that my storage is full, although it's a clean and fresh install. Does anybody know what to do about it? Thanks
Click to expand...
Click to collapse
okay..there has something about the recovery.
different size of ROM use different setting of recovery.
you may decompress the recovery.
for example. Recovery_120M_v3.0.2.4.rar
using TXT to run the (flash.cfg)
comes us:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 120M
cache ya 10M
userdata ya|asize|hr allsize
not very sure it is exactly same to me.
it say that your storage is full, because of your recovery setting.
assume your ROM is 120MB. but your recovery setting is 400MB. your system is using the space more itself. too much space free from the 400.
same like PC. your disk C is using 390GB from 400GB of your whole disk.
main setting is "system ya 120M"
try to make it small by the size of your ROM.
------------------------------------------------------------------------
if u have reduce the space of system. but still storage full.
try to cut up your sd card to help you phone storage.
cut one GB , and format it as ext2 or ext3 to help your phone.
you know android is running under linux system. and ext2 or ext3 is identified by linux.
so..hope it helps.
I formated my SD in FAT32. Ext 3 was then done in CWM (they say it should be like that) and I used 1024/0 ext 3 partition as they instructed in their guide. Probably just some little mistake during the install process. If there's time tomorrow, I'll try to reinstall it and see what happens.
Danibor said:
I formated my SD in FAT32. Ext 3 was then done in CWM (they say it should be like that) and I used 1024/0 ext 3 partition as they instructed in their guide. Probably just some little mistake during the install process. If there's time tomorrow, I'll try to reinstall it and see what happens.
Click to expand...
Click to collapse
all right
good luck~
Hi Friends,
I am using Desire HD rom on my htc hd2, for me everything working great but my internal memory is only of 24MB
Please help me out....
please provide me the information om how to increase internal memory....
Please do not make two threads on the same issue.
use app2sd !!!!
devfeel said:
Hi Friends,
I am using Desire HD rom on my htc hd2, for me everything working great but my internal memory is only of 24MB
Please help me out....
please provide me the information om how to increase internal memory....
Click to expand...
Click to collapse
it would be usefull if you told us exactly which desire hd rom, how you are running it (daf, cwm, sd card), and whether you have an ext partition on your sd card. Oh, and which phone you have, regular or tmous.
Sense roms are big, they take up a big chunk of the nand, so it is almost always essential to use app2sd and/or data2sd. (read the thread for the rom you have to know which it supports)
More accurate info = more accurate help.
rubbish info = rubbish guesswork help.
samsamuel said:
it would be usefull if you told us exactly which desire hd rom, how you are running it (daf, cwm, sd card), and whether you have an ext partition on your sd card. Oh, and which phone you have, regular or tmous.
Sense roms are big, they take up a big chunk of the nand, so it is almost always essential to use app2sd and/or data2sd. (read the thread for the rom you have to know which it supports)
More accurate info = more accurate help.
rubbish info = rubbish guesswork help.
Click to expand...
Click to collapse
Thanks for your reply...
here is my details..
ROM : LeoRCMix S v.1.5 (RCMixS v.2.0) [Sense 2.1+3.0]
Running using : CWM
Phone : HTC HD2
Im using : TMOUS
I know i have to use app2sd/data2sd.. but im not sure how to config it.. even i tried to do but im struck with boot screen..
ok, so it should only need a 200 meg system partition, so my guess would be that you haven't set up the 1gb ext partition? you can do that through cwm (backup your sd card first, it will get formatted) and
but im not sure how to config it
Click to expand...
Click to collapse
you dont have to. it does it itself so long as you have the ext partition properly created. I also think that if you DONT have the ext partition set up yet, you will probably need to reinstal the rom after you DO set it up.
So, summary, , , question 1 - do you have an ext partition set up?
(Also, and this causes a lot of confusion, , , when the system uses an ext partition, it DOES NOT show the extra space in the available memory count, but it does get used, , so for example my phone shows 210MB or so free internal space, , , i install a 10MB probgram, that goes down to 200, BUT after i reboot, it goes back up to 210, , because the prog has actually installed to my 512MB ext partition, not the 210 internal space.)
samsamuel said:
ok, so it should only need a 200 meg system partition, so my guess would be that you haven't set up the 1gb ext partition? you can do that through cwm (backup your sd card first, it will get formatted) and you dont have to. it does it itself so long as you have the ext partition properly created. I also think that if you DONT have the ext partition set up yet, you will probably need to reinstal the rom after you DO set it up.
So, summary, , , question 1 - do you have an ext partition set up?
(Also, and this causes a lot of confusion, , , when the system uses an ext partition, it DOES NOT show the extra space in the available memory count, but it does get used, , so for example my phone shows 210MB or so free internal space, , , i install a 10MB probgram, that goes down to 200, BUT after i reboot, it goes back up to 210, , because the prog has actually installed to my 512MB ext partition, not the 210 internal space.)
Click to expand...
Click to collapse
Yes i have ext 1GB partition and i created using CWM and i have 400MB patition layout.. but still i am having low memory issue.. can you please tell me how to use data2sd with respect to thr above rom..
devfeel said:
and i have 400MB patition layout..
Click to expand...
Click to collapse
then you are wasting 200 meg, , that rom says in post 1
EU and TMOUS: 200M system + 1GB EXT partition
Click to expand...
Click to collapse
that means you have 200 meg empty in your system partition, not being used.
Stuff that you install do not get installed to the system partition, nothing (or at least not apps / settings) gets put into the system partition, except the system at installation.
Do a full cwm backup, reflash using a 200MB partition layout, reflash the rom to teh new layout, restore your data and sd-ext partitions from advanced restore (in cwm) and you will recover the 200MB
samsamuel said:
then you are wasting 200 meg, , that rom says in post 1
that means you have 200 meg empty in your system partition, not being used.
Stuff that you install do not get installed to the system partition, nothing (or at least not apps / settings) gets put into the system partition, except the system at installation.
Do a full cwm backup, reflash using a 200MB partition layout, reflash the rom to teh new layout, restore your data and sd-ext partitions from advanced restore (in cwm) and you will recover the 200MB
Click to expand...
Click to collapse
Thanks a lot... now i understood wht is system and data memory.. now i got 200mb internal memory.. thanks again
same problem
i have a nand of 4.1.2 in my hd2 its pacman
it shows system memory only 13mb, i have removed all apps i installed earlier but still no space freed, can i atleast get the same 150mb back which i had earlier i.e any way to wipe all data on it/hard reset it?
is there any way of expanding the memory? because after i have installed 10-15 apps the memory vanished(even though i moved the apps to sdcard using app2sd) does that means i can not install more apps any way??
p.s i am a new user of android dont know how to install new rom etc so please explain the solution in simple steps.
Hi everyone,
Now i have a problem with my htc hd2 nand rom. I had tried alot of nand roms and when i tried to make ext3( i tried with CWM, Gpartet, Easus, Minitool) but when i boot my rom i saw only 100mb of free memory. After puting my sd card in my PC i run easus and there is ext3 partition but the phone cant read it. Please help me if you can.
wowrlz123 said:
Hi everyone,
Now i have a problem with my htc hd2 nand rom. I had tried alot of nand roms and when i tried to make ext3( i tried with CWM, Gpartet, Easus, Minitool) but when i boot my rom i saw only 100mb of free memory. After puting my sd card in my PC i run easus and there is ext3 partition but the phone cant read it. Please help me if you can.
Click to expand...
Click to collapse
Are you sure that you created it as a second partition and as a primairy (instead of a logical)?
wowrlz123 said:
Hi everyone,
Now i have a problem with my htc hd2 nand rom. I had tried alot of nand roms and when i tried to make ext3( i tried with CWM, Gpartet, Easus, Minitool) but when i boot my rom i saw only 100mb of free memory. After puting my sd card in my PC i run easus and there is ext3 partition but the phone cant read it. Please help me if you can.
Click to expand...
Click to collapse
Which roms are you trying it with? Have you tried other cards?
Format the card using Panasonic SDFormatter..
Format: FULL (Overwrite)
Size Adjustment: ON
Now partition again using CWM, 1GB space and 0MB swap.
Yes i had tried 2 cards 16Gb and 2GB now i will try again.
PS: I'm using Typhoon now.
http://imageshack.us/f/90/47579461.png/
Here is pic to see.
wowrlz123 said:
Yes i had tried 2 cards 16Gb and 2GB now i will try again.
PS: I'm using Typhoon now.
http://imageshack.us/f/90/47579461.png/
Here is pic to see.
Click to expand...
Click to collapse
That looks like it should be correct.
Give rafdroid 4.02 a try, that is the one I use and which shows the the correct size for sure.
lukesan said:
That looks like it should be correct.
Give rafdroid 4.02 a try, that is the one I use and which shows the the correct size for sure.
Click to expand...
Click to collapse
I tried it but its stuck on rafdroid logo with the green droid. I gave it 2 hours but the same. One week ago i was able to boot it but now i cant.
wowrlz123 said:
Hi everyone,
Now i have a problem with my htc hd2 nand rom. I had tried alot of nand roms and when i tried to make ext3( i tried with CWM, Gpartet, Easus, Minitool) but when i boot my rom i saw only 100mb of free memory. After puting my sd card in my PC i run easus and there is ext3 partition but the phone cant read it. Please help me if you can.
Click to expand...
Click to collapse
Hi,
I think you are confusing the different sections of space on the phone.
Get yourself Titanium Backup,and it will list the different storage spaces you have:
System ROM
Internal
SD card
SD card(a2sd) or EXT.3 partition in your case.
The 100MB you see is internal free space.
You can then how much space you have on your EXT. and what is being used.
malybru said:
Hi,
I think you are confusing the different sections of space on the phone.
Get yourself Titanium Backup,and it will list the different storage spaces you have:
System ROM
Internal
SD card
SD card(a2sd) or EXT.3 partition in your case.
The 100MB you see is internal free space.
You can then how much space you have on your EXT. and what is being used.
Click to expand...
Click to collapse
Here you are see it please and tell me if its alright.
http://imageshack.us/f/687/snap20110610130613.png/
wowrlz123 said:
Here you are see it please and tell me if its alright.
http://imageshack.us/f/687/snap20110610130613.png/
Click to expand...
Click to collapse
Hi,
It looks absolutely fine.
260MB of free internal memory
And 999MB free on your EXT. partition.
You should update the app.It will also show system as well.
wowrlz123 said:
I tried it but its stuck on rafdroid logo with the green droid.
Click to expand...
Click to collapse
make sure you clean out the old rom before booting the new rom, , in CWM choose 'wipe data/factory reset', then 'wipe cache', then 'advanced - wipe dalvik cache'
I' m right now thank you for helping me.
Sent from my HD2 using Tapatalk
HTC HD2 EXT3 partition not showing up
Hi,
I just installed miui 6.9.29. Everything is working fine but one thing: the ext3 partition i created in CWM (512 mb, 0 mb swap) does not show up as internal storage. I tried to mount it in CWM, but still no luck . Can someone please help me? I really need more than 115 mb of internal storage, since there is only 23.54 mb available. Pretty stupid actually because i only want about 3-4 apps more..
Please help!
http://forum.xda-developers.com/showpost.php?p=26286781&postcount=1
try this, it worked for me
Hi,
Short / long story:
I have long time unused HTC HD2.
With Android (NexusHD2-KitKat-CM11.0_V4.5.zip is the file which I found in backup, so I assume this is what I install - sorry, it was long time ago.
Some time ago I need microSD card so I took it from my HD2, I did backup only windows FAT32 partition.
Now, I need to run my HD2 , I have install microSD 2 GB (800 MB FAT32 + 1GB Ext4) but is not working correctly.
It starting I can install Teamviewer, but when I need to install HTC module for teamviewer it's telling me that is not enough storage.
Quite often is restarting and after restart not keeping any settings (wi-fi) app installed (teamviewer) it's resetting each time to factory settings.
In Settings - Storage shows 'Total space' - Available 0.00 bytes
I did what is instructed on this webpage but it didn't help http://android.stackexchange.com/qu...mory-in-android-nand-roms-cannot-install-apps
Can anybody advise me which is the easiest way to make my HD2 working properly? Means have enough memory to do anything.
The purpose of restoring my HD2 is working as a router, tethering machine. I need to share internet from mobile network for smart TV and Tablet over wi-fi. It will be unattended so I need remote control access (team viewer host).
I'm open for a suggestion of changing the ROM if there is something reasonable easy and described (as I'm not big ROM expert). i've seen a ROM list for HD2, is too long.
Thanks in advance for your help.
it sounds like you are missing a data partition, perhaps the sdcard you used before had an ext4 partition which your new one does not have. Use recovery, in nand, to create an ext4 partition, then boot into rom, might work.
Robbie P said:
it sounds like you are missing a data partition, perhaps the sdcard you used before had an ext4 partition which your new one does not have. Use recovery, in nand, to create an ext4 partition, then boot into rom, might work.
Click to expand...
Click to collapse
Hi,
Thanks for your reply.
I did Ext4 by MiniTool Partition under Windows primarily.
And later in recovery, I have setup 1024MB and swap = 0 M.
It didn't help.
Should I mount it or so?
Update:
I have a look in log in nand - recovery and it's says that my second partition is Ext3 not Ext4.
And there is no way to change it.
What is your nand recovery? version?
Clk or magldr?
The recovery might say ext3 when it means ext4, but it does not seem right.
Robbie P said:
What is your nand recovery? version?
Clk or magldr?
The recovery might say ext3 when it means ext4, but it does not seem right.
Click to expand...
Click to collapse
It says on the top bar screen 'CWM-based on Recovery v5.0.2.6' but was install with ROM so should be fine.
try using the recovery to format the ext partition to ext2 or 3 then use it again to ext4
Robbie P said:
try using the recovery to format the ext partition to ext2 or 3 then use it again to ext4
Click to expand...
Click to collapse
As I said, I have created and formatted partitions under windows FAT32 & Ext4 and then under recovery, there was no choice of the file system file, I can only choose the size. And it was formatted to Ext3 - log saying.
badzi0r said:
As I said, I have created and formatted partitions under windows FAT32 & Ext4 and then under recovery, there was no choice of the file system file, I can only choose the size. And it was formatted to Ext3 - log saying.
Click to expand...
Click to collapse
Here's the solution:
http://forum.xda-developers.com/showpost.php?p=38956440&postcount=4
Thank you