Hi,
I have two vertical very fine lines on my S4 screen (please see attached) - I've taken a screenshot and viewed it on my PC but I cannot see anything hence it seems like its my screen! I've another phone to take picture of my screen so its not very clear but the two line are on the right hand side of the screen.
I've rebooted etc but no change.
Anyone else experience anything similar or advise please?
Thanks, Ash
mchu6am4 said:
Hi,
I have two vertical very fine lines on my S4 screen (please see attached) - I've taken a screenshot and viewed it on my PC but I cannot see anything hence it seems like its my screen! I've another phone to take picture of my screen so its not very clear but the two line are on the right hand side of the screen.
I've rebooted etc but no change.
Anyone else experience anything similar or advise please?
Thanks, Ash
Click to expand...
Click to collapse
First use another screen test app
but if u get this problem when use test menu of android >> it s hardware issue take to service for replace.
:good:
x102x96x said:
First use another screen test app
but if u get this problem when use test menu of android >> it s hardware issue take to service for replace.
:good:
Click to expand...
Click to collapse
Hi, thanks for you post...I have tried to use pixel test program from Play store and its still the same...how do i access test menu of android?
mchu6am4 said:
Hi, thanks for you post...I have tried to use pixel test program from Play store and its still the same...how do i access test menu of android?
Click to expand...
Click to collapse
*#0011# Service Menu
and etc
x102x96x said:
*#0011# Service Menu
and etc
Click to expand...
Click to collapse
Thanks...running the LCD test also shows up the two lines (on red and blue but not noticeable on green)!
Looks like I'll have to restore back to Samsung stock and send it in for repair!
Related
normally, when we open the opera and rotate the HD to horizontal, the screen also will rotate, but i facing a problem with it now. once i rotate it, it will bring me back to the home screen, i tried many times, but it still can't rotate and bring me back to the home screen.
but, this problem can be solved after i do the softreset. after softreset, the problem will come back again after few days.i still can't figure out whether is my installed application crash or what.
anyone can help?
nobody know? please help...thanks in advance
It is most likely that you installed a color top bar and you installed the wrong one (some play nice, while some don't). If that's the case, just go grab a different color top bar (almost all the new ones are fine, it was really only a problem with some of the early ones)
Svegetto said:
It is most likely that you installed a color top bar and you installed the wrong one (some play nice, while some don't). If that's the case, just go grab a different color top bar (almost all the new ones are fine, it was really only a problem with some of the early ones)
Click to expand...
Click to collapse
thanks brother. which colour topbar you are using? can give me the link to downlink?
of the many that or on this forum (mos of them will not give u that error). However I can't give u a link or anything as i've had it for a while now, sorry
Svegetto said:
of the many that or on this forum (mos of them will not give u that error). However I can't give u a link or anything as i've had it for a while now, sorry
Click to expand...
Click to collapse
it is all right, dude.
actually, mine colour topbar is downloaded from here also.
or maybe you just tell me the name of your topbar, i believe you can see the top bar name from the Remove Program there. Million thanks..
Hey, I am using the TCPMP-0.72RC1-GF5500Edition-Alpha4, and i have also tried the original TCPMP-0.72RC1.. It works fine, but the 3 buttons play/pause, forward and stop is hidden next to the field "options". Only when i hit the buttons it appear fast, and then goes away again..
All got that "problem"?
Do you know another tcpmp version where it works?
..
its like the color of the bottom is gone.. its all black.. so i can only see the mute button and File, Option, mutesound and volume...
I had the same problem...the problem is that the background color of the button is black color, same color of the default windows theme..
Try to change the windows theme color and you will see all the buttons..
Nikitas
Ohh i see Cant you fix it someway? so i still can have my black theme?
I have made a quick fix. its a bit better than the black bottom
Alfetch said:
Hey, I am using the TCPMP-0.72RC1-GF5500Edition-Alpha4, and i have also tried the original TCPMP-0.72RC1.. It works fine, but the 3 buttons play/pause, forward and stop is hidden next to the field "options". Only when i hit the buttons it appear fast, and then goes away again..
All got that "problem"?
Do you know another tcpmp version where it works?
Click to expand...
Click to collapse
I thought it was too ugly with that black bottom, so i made a fix for users with a black theme. Hope you like
DOWNLOAD HERE:
http://rapidshare.com/files/346503571/TCPMP_-_Black_bottom_realfix.zip.html
Regards alfetch
which version is this fix for [the 0.72 or the g5500 edition] and could you post a screen shot or something thing please?
Alfetch said:
I thought it was too ugly with that black bottom, so i made a fix for users with a black theme. Hope you like
DOWNLOAD HERE:
http://rapidshare.com/files/346503571/TCPMP_-_Black_bottom_realfix.zip.html
Regards alfetch
Click to expand...
Click to collapse
Hi, the download is no longer valid as it has been used 10 times already. Could someone upload again and provide link please. Thanks
SAman1 said:
Hi, the download is no longer valid as it has been used 10 times already. Could someone upload again and provide link please. Thanks
Click to expand...
Click to collapse
+1 The missing buttons are a nuisance
anybody ??? ....Please?
Hy guys,
I have a serious problem with my SGS II display.
When different dark colors such as black,blue, red and others appears on my display the color on its orizontal position it seems to be bespattered.And now my display is so annoying.
The problem is getting worse when the phone is heating up.
The phone was running KE7 + root.I tryied to factory reset but the problem didnt disappear.
I need your help.PLEASE!
Its a return under warranty job if factory reset has failed .
Alternative is to flash a later firmware .
jje
Can you take pictures of it, I cant seem to imagine how it looks like.
print screen
what is the combination for the print screen on SGS II? I tryied back+home and it didnt work.
What is the folder for the print screens?
ionutzBA said:
what is the combination for the print screen on SGS II? I tryied back+home and it didnt work.
What is the folder for the print screens?
Click to expand...
Click to collapse
You might need to take an actual photo and not a screen shot.
pictures
screenshot + normal view
Waiting for advices!
Thank you!
The pictures are totally out of focus. But in those faded pic I don't see anything wrong, do you?
ithehappy said:
The pictures are totally out of focus. But in those faded pic I don't see anything wrong, do you?
Click to expand...
Click to collapse
The actual pictures all look fine to me but in the screenshot I am seeing some "colour banding" which is normal at the moment as the device is creating 16bit colours and not 32 bit (yet anyways).
OP... Is it the colour banding that you are talking about? If so then that is normal for now I am afraid.
You can simply press and hold the home button and then the power key and release both to take a screenshot. You can then see them in the Gallery.
ionutzBA said:
I need your help.PLEASE!
Click to expand...
Click to collapse
No, actually you need help from Samsung (repair) or where your purchased it from (return or exchange). If you're running a stock ROM and did a hard reset the problem's obviously not software.
You can clearly see in the pictures (although they are terribly out of focus) that there seems to be a blue bar goes across the screen where the image is, and it's not there on the screenshot.
That's a hardware problem and the phone needs to be returned and repaired/replaced.
i have no idea how this has happened,
Used last yesterday to read the latest flash comic on the train,
Then went for a few drinks, home and today after getting up theres a line running across the screen close to the middle,
I gave the screen a couple of tap and the colour of the line changes, and after a few taps the line goes away then comes back while using the tab,
Currently running stock firmware without root...
Anyone have any ideas,
Have just contacted Samsung waiting for a reply...
I love this tab so it wont stop me from using but would live to know if its serious and in need of urgent repairs..
As there is still warranty valid, I would make use of it
Can you plz add a screenshot?
Super-S said:
Can you plz add a screenshot?
Click to expand...
Click to collapse
It's just a faint line but once you tap the screen changes couloir abs goes darker then disappears
I was playing with the dialer,i hit this combo *#*#28465#*#* it tooks me to a test mode,plus some calibration menus.
No sure if anyone know about it but just like to share it.
gm007 said:
I was playing with the dialer,i hit this combo *#*#28465#*#* it tooks me to a test mode,plus some calibration menus.
No sure if anyone know about it but just like to share it.
Click to expand...
Click to collapse
Good finding.
This is my result on L29C432B126 (B138)
How do you move to the test "touch screen test"? I managed to enter the main screen...but don't know how to move on from there...thus only able to test the infrared...
lffoong said:
How do you move to the test "touch screen test"? I managed to enter the main screen...but don't know how to move on from there...thus only able to test the infrared...
Click to expand...
Click to collapse
Move ur finger across the screen frame.
What I meant was...i stuck in this screen. How do I move on to other screen.
lffoong said:
What I meant was...i stuck in this screen. How do I move on to other screen.
Click to expand...
Click to collapse
Volume down.
But this test mode is broken not sure what is useful for.
I extracted smali from Contacts.apk and found code *#2846# (dial in stock dialer)
This Service Test Mode has ~20 different tests.
Volume Down - start tests or go forward
Volume Up - go back to previous test
Power - interrupt test
Home - click twice to exit from Service Test Mode
p.s. Warning: First test in row is LOUD !
Anyone noticed on the flash test, the Mate 9 have 2 type of light?
One is white, while the other one is orange?
How to trigger the orange lightt?
ginda10 said:
Anyone noticed on the flash test, the Mate 9 have 2 type of light?
One is white, while the other one is orange?
How to trigger the orange lightt?
Click to expand...
Click to collapse
They work both when using the camera.