I found some adaptors that can plug into the USB in the side of the tablet and then connect to a wired internet connection. Are these all the same? Are they plug and play or are there drivers needed?
I took mine on vacation a couple of months ago and found my hotel room had wired but not wireless. The free wifi was on floor 5 and I was on 20 at the other end.
Thanks
Anyone at all have an answer?
At least one has to have some comment. I'm lonely out here
What I usually do is take a small wireless router running dd-wrt with me on trips. It can be used as either a wired or wireless bridge so that all I need to do is connect it to the hotel network. Then all my devices (phone-tablet-laptop-etc) just connect to it.
Sent from my A500 using xda premium
This is discussed over on Asus Transformer forums.
hey all
am connecting my htc sensation 4g.. with my laptop vie usb by intenet pass-through .. and am connecting my lap with 3g usb connector
and am sharing it with my phone ... my problem is I don't want 2 keep stick with my laptop via usb cable .. i want 2 connect wirelessly
means that I want to connect my phone via wireless with my 3g usb connector that am using with my lap ...
I hope to solve this soon
I hope I read that right but have you tried any of the wireless tethering apps? Which carrier do you have and which phone and ROM?
Just stick the SIM card of the 3G dongle in your phone. No need for the laptop.
I just got the Western Digital Livewire setup. My nexus 7 connects fine using a generic apple Ethernet adapter + OTG and connected straight into my cable modem. I tried to get Ethernet on the N7 through a port on the Powerline and it just would not recognize it. Has anyone else tried this or is it possible Android doesn't like to be hooked up to Ethernet that way? I'm pretty stumped.
Cybermen83 said:
I just got the Western Digital Powerline setup. My nexus 7 connects fine using a generic apple Ethernet adapter + OTG and connected straight into my cable modem. I tried to get Ethernet on the N7 through a port on the Powerline and it just would not recognize it. Has anyone else tried this or is it possible Android doesn't like to be hooked up to Ethernet that way? I'm pretty stumped.
Click to expand...
Click to collapse
As to your question, I have no idea. I'm just curious why you're using ethernet instead of wifi. Is there any benefit? Not trolling, I'm just wondering what your motivation is. I must admit I've never imagined anyone would use a tablet on anything other than wireless.
slack04 said:
As to your question, I have no idea. I'm just curious why you're using ethernet instead of wifi. Is there any benefit? Not trolling, I'm just wondering what your motivation is. I must admit I've never imagined anyone would use a tablet on anything other than wireless.
Click to expand...
Click to collapse
I've seen a few on the forum use Ethernet on their Nexus 7. It can give a more consistent internet speed in some cases and I think it drains less battery from the device. I had the Western Digital setup for some VOIP phone stuff so I thought I'd try it out. I don't have wifi.
Whether it's a powerline or not shouldn't matter as that's transparent to the connected device. It just sees an Ethernet link.
So N7 + OTG + USB Ethernet Adapter into the cable modem worked fine? N7 + USB Ethernet Adapter into the powerline did not work? What is the powerline connected to again? Is the cable modem just a "dumb" modem or is it a router as well with DHCP functionality?
Do any other devices work being connected through the powerline adapters?
Yes the N7+OTG+USB Ethernet works fine. Just started trying to network things as I have a need for it now. I see that I need to get a broadband router still. I have an Arris cable modem( TM402G/110) that I use with Xfinity Voice. I thought maybe it could have a router already in it but I guess not. Can anyone recommend a cheap broadband router, well low cost and good function?
i want to use turn on both Ethernet and Wifi on my android decive at the same time with different IP addresses like:
Wifi: IP: 192.168.1.5 Gateway: 192.168.1.1
and
Ethernet: IP:192.168.0.10 Gateway: (Blank)
Is it possible? the problem is that when i turn Wifi on , the Ethernet will get disconnected.
and only when Wifi goes off or disconnected Ethernet will be connected!
How can i use both of them at the same time connected to the network?
It's possible in PC based systems even with 2-3 adapters! But what about Android devices?
armini said:
i want to use turn on both Ethernet and Wifi on my android decive at the same time with different IP addresses like:
Wifi: IP: 192.168.1.5 Gateway: 192.168.1.1
and
Ethernet: IP:192.168.0.10 Gateway: (Blank)
Is it possible? the problem is that when i turn Wifi on , the Ethernet will get disconnected.
and only when Wifi goes off or disconnected Ethernet will be connected!
How can i use both of them at the same time connected to the network?
It's possible in PC based systems even with 2-3 adapters! But what about Android devices?
Click to expand...
Click to collapse
And WHY WOULD YOU want to do this? and what android device has Ethernet??!!! unless your using one of those Rasberry PI or whatver there called.
hyelton said:
And WHY WOULD YOU want to do this? and what android device has Ethernet??!!! unless your using one of those Rasberry PI or whatver there called.
Click to expand...
Click to collapse
okay , i dont want to do this anymore, the problem solved.
im using USB to Ethernet adapter.
i use wifi of tablet for other purpose , i want to add a device to tablet that works with network
i can simply put an accesspoint and connect the device to tablet but it a bit more expensive that USB-Ethernet adapter
simply for this!
anyways thanks for ur answer
Thanks for your precious input man!. It also works for me with an Android compatible USB / Ethernet Adapter. If I configure both Wifi and Ethernet manually with different subnets, I can make both work simultaneously. I use this adapter: Assmann DN-10050-1 Digitus USB network adapter.
@hyelton: ever heard of Android TV boxes? Imagine to have it connected via Wifi to the web and via Ethernet to your NAS?
Cheers.
intel9014 said:
Thanks for your precious input man!. It also works for me with an Android compatible USB / Ethernet Adapter. If I configure both Wifi and Ethernet manually with different subnets, I can make both work simultaneously. I use this adapter: Assmann DN-10050-1 Digitus USB network adapter.
@hyelton: ever heard of Android TV boxes? Imagine to have it connected via Wifi to the web and via Ethernet to your NAS?
Cheers.
Click to expand...
Click to collapse
Yes I know, but why is the NAS not already connected to the same network that the box is connecting to the WiFi? The ideal way is to have the NAS part of your network not separate.
hyelton said:
Yes I know, but why is the NAS not already connected to the same network that the box is connecting to the WiFi? The ideal way is to have the NAS part of your network not separate.
Click to expand...
Click to collapse
You are right, it is the ideal way to have everything in the same network. But in my experience, streaming HD content via Wifi is too laggy. Therefore I connect my NAS and my Android TV box via an ethernet cable.
intel9014 said:
You are right, it is the ideal way to have everything in the same network. But in my experience, streaming HD content via Wifi is too laggy. Therefore I connect my NAS and my Android TV box via an ethernet cable.
Click to expand...
Click to collapse
But why not connect the Ethernet side TO your router and not use wifi?
Sent from my iPhone using Tapatalk
hyelton said:
But why not connect the Ethernet side TO your router and not use wifi?
Click to expand...
Click to collapse
Because I would have to drill holes in several walls to get the cable trough to all devices. This way I only need to place the NAS in the vicinity of the Android TV Box and connect them via cable.
intel9014 said:
Because I would have to drill holes in several walls to get the cable trough to all devices. This way I only need to place the NAS in the vicinity of the Android TV Box and connect them via cable.
Click to expand...
Click to collapse
Idk it just seems verry wasteful. I have Ethernet scattered throughout my upstarts no holes drilled and none of it visible. Why don't you just use an external USB hard drive instead of wasting a NAS?
Sent from my iPhone using Tapatalk
Dear Friends,
let me explain about the problem.
Result: let me say that the problem solved by interfacing android usb to my device instead of ethernet.
Details: and now about the reason i need to do it: i have a small electronic design office. i need to design a system that controls electrical I/Os (like Relays, Triacs, etc) and need android to control that wirelessly, so 2 problem exists:
1. how to connect android wirelessly to PC / Mobile?
Answer: by network programming and wifi
2. how to connect android device (tablet/phone without direct I/Os) to the Electrical devices with wire?
Answer: there is 2way: 1.with Ethernet , 2. with Usb
Ethernet: via Enc28j60
Usb: with usb controller
and why not to use Router/AccessPoint?
Answer: simply because addition of more device! it increase cost of building and the volume , power consumption, complexity of system etc.
Thanks for ur attention.
(sorry for bad english.)
Sent from my Hol-U19 using Tapatalk
Details
intel9014 said:
Thanks for your precious input man!. It also works for me with an Android compatible USB / Ethernet Adapter. If I configure both Wifi and Ethernet manually with different subnets, I can make both work simultaneously. I use this adapter: Assmann DN-10050-1 Digitus USB network adapter.
@hyelton: ever heard of Android TV boxes? Imagine to have it connected via Wifi to the web and via Ethernet to your NAS?
Cheers.
Click to expand...
Click to collapse
Hello,
I'm onto the samething, already bought the usb to ethernet connector but can't get it to work.
Can you provide me the exact details how you have done this ?
Thanks in advance.
intel9014 said:
Thanks for your precious input man!. It also works for me with an Android compatible USB / Ethernet Adapter. If I configure both Wifi and Ethernet manually with different subnets, I can make both work simultaneously. I use this adapter: Assmann DN-10050-1 Digitus USB network adapter.
@hyelton: ever heard of Android TV boxes? Imagine to have it connected via Wifi to the web and via Ethernet to your NAS?
Cheers.
Click to expand...
Click to collapse
I know this is an old topic...
But just wondering, doesn't Android TV boxes have their own Ethernet port? Or does only the USB Ethernet work simultaneously with builtin in WiFi?
I am keen to make them work simultaneously on HiMedia media player which already has a builtin Ethernet port and WiFi, but only one works at a time.
Thanks
U need rooted tv or android
Maybe this will help
Bridging Connections in Android
I've recently worked to get OpenVPN working on my Android CM7-based phone. This allows me to connect to my personal network from my phone which is great. I'd like to take it a step further by allowing other computers to tether to my phone and...
forum.xda-developers.com
Hi, does anyone have any idea how to "activate" (if that's the word) the Ethernet on the MOJO - obviously it usually connects by Wireless, but just wondered if it was possible to Connect via the Ethernet. I'm running on CM12 not stock so not sure if there are menu choices for this sort of thing.
Msr Blobby said:
Hi, does anyone have any idea how to "activate" (if that's the word) the Ethernet on the MOJO - obviously it usually connects by Wireless, but just wondered if it was possible to Connect via the Ethernet. I'm running on CM12 not stock so not sure if there are menu choices for this sort of thing.
Click to expand...
Click to collapse
I switched my MOJO to Ethernet a few days ago, and it "just worked." I plugged the Ethernet cable in, turned off Wi-Fi in the drop-down settings, and it's still working. I'm using unjustified's CM12.1 as well.
Sent from my C6730 using Tapatalk
Helps if you plug it in to the router
krikit said:
I switched my MOJO to Ethernet a few days ago, and it "just worked." I plugged the Ethernet cable in, turned off Wi-Fi in the drop-down settings, and it's still working. I'm using unjustified's CM12.1 as well.
Sent from my C6730 using Tapatalk
Click to expand...
Click to collapse
Thanks - I found the ethernet plug had disconnected from the router - that would explain alot