I am working on unlock the sprint s4.
I need some help from someone who has unlocked the phone.
for the people who has unlocked:
you can do uicc unlock in the system update menu again, and send the log to me.
you can get log by "adb logcat >xxx.log", this command will write the system log to your computer.
send the log to me ,maybe I can find out what has the sprint done while unlock the phone.
Related
I recieved an unlock code from us cellular but they did not tell me how to enter it in the phone is there anyone that can give me the steps to unlock my phone.
jssims09 said:
I recieved an unlock code from us cellular but they did not tell me how to enter it in the phone is there anyone that can give me the steps to unlock my phone.
Click to expand...
Click to collapse
I'll copy and paste the instructions that my cellphone unlocker service gave me. The should be the same for all Note 3s.
---------- Instructions ----------
Read This First
* With the provided Unlock codes, if you are receiving "Code Error" or "Sim Network Unlock Unsuccessful, DO NOT WORRY! proceed to the "Trouble Shooting" section on how to proceed.
* Make sure "Airplane Mode" and "Wi-Fi" is turned off under wireless connections if your Samsung is an Android device.
There are Multiple Unlock Codes provided, which one do I use?
If you only received 1 Unlock Code, Don't worry about this part, use the code provided above.
* Unlock Code is the Network=xxxxxxxx is the Unlock Code as shown below:
Example:
NETWORK=xxxxxxxx; PROVIDER=xxxxxxxx; SUBPROVIDER=xxxxxxxx; DEFREEZE=xxxxxxxx
* You can ignore the rest of the codes, unless you are receiving a "Phone Freeze" message when trying to input the Unlock Code.
---------- Code Input Instructions ----------
How to Enter Unlock Code
Method #1
Insert a Non accepted simcard in your phone and power on. Once finished loading your phone will ask you to enter a code, enter the Unlock Code
Note: Non Accepted Simcard is any simcard not from the original provider
How do you get an unlock code? Site seems broken due to the EMUI 5 landing page.
Second that.
Huawei's site works now. https://emui.huawei.com/en/plugin/unlock/index
Tap About tablet 10 times
Enable USB debugging and OEM Unlock in developer options
Install minimal ADB and fastboot
Get an unlock code from that page
From a command prompt type:
Code:
adb reboot bootloader
Then from the command prompt type:
Code:
fastboot oem unlock INSERTYOURUNLOCKCODEHERE
Ok, I'm trying to use the link above to unlock my tablet. I've updated to EMUI 5.0. When I go to the unlock site, the first question is about which version of EMUI you have. If you put in "Before EMUI 5.0", you can choose either "Smartphone" or "Tablet". If you put in "Since EMUI 5.0", the only choice is "Smartphone". So, either answer doesn't seem to be correct. Does anybody know which option I should use?
I have the same problem. Maybe we should contact the support? If i fill the form, there is an error message, that the informations are not correct. I have tested different methods, for example switching to the chinese Site, three different browsers, other countrys, but it didn't worked. Could it be that the wifi Version is not supported at the moment, because of bricks-danger? Other users in my country have created manuals that seems to work but if i try it, i can't receive the bootloader code. That's the first step to root the device and we are failing here. ^^
https://emui.huawei.com/en/plugin/unlock/index no longer works (it leads to a 404 error). Do you know if there is a new url for obtaining an unlock code?
I wonder the same. I get a404 error
Hello,
I am going through the official way of unlocking the bootloader through developer.lge.com
I am trying to see my device's ID but can't get into boot loader mode
When ever I run "adb reboot bootloader" in CMD I get the message "no device/emulator found"
- OEM unlock is enabled
- USB debugging is enabeled
- I am using LG usb drivers
Did a ton of googling and not sure what else to try.
I wanna root this phone so bad!
Well I was able to get past the ID issue by using a different PC, however once I was able to input my device ID and everything into the LG site, the message I got was this:
Your device (LGUS996Z) does not support unlocking the bootloader. Please check your model. Your account will be locked if you enter the wrong information more than 8 times.
I don't even understand how it's possible if this us a US996.. gonna be pretty upset if I can't unlock the bootloader
What the heck is a LGUS996Z anyway!?
Gonna be really upset if I can't unlock the bootloader
Here's a picture of the model number sticker:
https://www.dropbox.com/s/y64rgsee2rol37a/20180120_024800.jpg?dl=0
pretty sure it isn't the us cellular version
Hello
I sent my device for warranty because I have ghost touches. I received my phone and they brought it back without any change, I'm still facing ghost touches. BTW thats not the problem.
Previously I unlocked the bootloader and rooted my device, before to send the device for warranty I locked the bootloader again and sent it like it was new.
Now I'm trying to unlock the bootloader but it is impossible to do. When I try to get the fastboot oem unlock data, I put the code on the motorola website and the answer is "Your devices does not qualify for bootloader unlocking".
I tried too to put the old code that Motorola sent me to my email, I put the commands on adb window but also I get an error message "Code validation failure with status 7".
If someone have faced this issue would be great to know how to solve it.
Thanks.
This was discussed and answered over at #681
Duplicate closed.
I am trying to unlock my bootloader. I finally received my unlock token from OnePlus but for some reason i cant unlock the device. i have the unlock-bin file in the same folder as adb, i have usb debugging on, my device is in fastboot mode, but i keep getting this error (see attached picture). Can someone please help? Also, does unlocking the bootloader factory reset the device?
bigmikey307 said:
I am trying to unlock my bootloader. I finally received my unlock token from OnePlus but for some reason i cant unlock the device. i have the unlock-bin file in the same folder as adb, i have usb debugging on, my device is in fastboot mode, but i keep getting this error (see attached picture). Can someone please help? Also, does unlocking the bootloader factory reset the device?
Click to expand...
Click to collapse
Replace <unlock_token.bin> with the ACTUAL unlock token you got.
Yes, unlocking bootloader wipes the phone.
There are multiple forums on this.
While the phone is plugged in to the PC reboot it to fastboot again leaving it plugged in. ( Make sure you selected OEM unlock in developer options)
I managed to get it to work by using the ALL IN ONE tool
Just give the command, and drag and drop the unlockbbin. Should look like this: fastboot flash cust-unlock 23857363fbsndhdnd.bin. {for future reference, i have to reuse a couple times a week
Not unlock.bin
bigmikey307 said:
I managed to get it to work by using the ALL IN ONE tool
Click to expand...
Click to collapse
how bro can u explain ?
Same problem here
I think I've been out of the game for too long........ I was just too embarrassed to post the same question , ha! Well, at least the first part of the OP's question, about having the token in the correct path and it producing an error. If there's a step by step command by command walk-thru out there, I'd be grateful for the link. And yes I know how a search bar works, but all of the guides or whatever you want to call them seem to be missing a few steps....... Or maybe I should just go back to eating my butterscotch and yelling at kids to stay off my lawn ?