Installed Quarz August 1 release. So far, most things working well. I use bluetooth for music a lot and this is working well. Battery life appears quite satisfactory, I use the MyTracks app for bike rides and listen to music over bluetooth.
ilikepcs said:
Installed Quarz August 1 release. So far, most things working well. I use bluetooth for music a lot and this is working well. Battery life appears quite satisfactory, I use the MyTracks app for bike rides and listen to music over bluetooth.
Click to expand...
Click to collapse
Thanks for the report. How is the BT for calls? I'm on CM 10.1 and have problems with mobile data. Does CM 10.2 have any mobile data issues? From the reports on the Defy thread, it sounds like the first Quarz build for 4.3 is quite promising.
NickKG81 said:
Thanks for the report. How is the BT for calls? I'm on CM 10.1 and have problems with mobile data. Does CM 10.2 have any mobile data issues? From the reports on the Defy thread, it sounds like the first Quarz build for 4.3 is quite promising.
Click to expand...
Click to collapse
BT calling leaves something to be desired. Very garbled. WiFi hotspot setup worked for me. Haven't tried BT teth.
ilikepcs said:
BT calling leaves something to be desired. Very garbled. WiFi hotspot setup worked for me. Haven't tried BT teth.
Click to expand...
Click to collapse
provide link please.....
hiandro said:
provide link please.....
Click to expand...
Click to collapse
Quarx has the Bravo version links posted in the Defy forum.
http://forum.xda-developers.com/showthread.php?t=2385250
Did I mention that BT music works? It does.
ilikepcs said:
Installed Quarz August 1 release. So far, most things working well. I use bluetooth for music a lot and this is working well. Battery life appears quite satisfactory, I use the MyTracks app for bike rides and listen to music over bluetooth.
Click to expand...
Click to collapse
as you have managed to install the rom because I do not work right and only sticks me that you modified or urge you used to?
Quarx Sept 17 Build
Has anyone managed to install the most recent Quarx build of CM 10.2 (Sept 17, 2013)? When I try to install the zip I get an error:
status(0)
Installation aborted
I've seen on other forums that this most likely reflects the build not matching the phone. Odd. I've doubled checked this and checked the md5sum. Has anyone had any success?
sjbonner said:
Has anyone managed to install the most recent Quarx build of CM 10.2 (Sept 17, 2013)? When I try to install the zip I get an error:
status(0)
Installation aborted
I've seen on other forums that this most likely reflects the build not matching the phone. Odd. I've doubled checked this and checked the md5sum. Has anyone had any success?
Click to expand...
Click to collapse
Two ways:
1) Install stock image (Android 2.2.1)
2) Install adb, root, cwm
3) Install cm10-1 via CWM
4) Install cm10-2 via TWRP
or
1) Install TWRP on current rom
2) Install cm10-2 via TWRP
mak_v_ said:
Two ways:
1) Install stock image (Android 2.2.1)
2) Install adb, root, cwm
3) Install cm10-1 via CWM
4) Install cm10-2 via TWRP
or
1) Install TWRP on current rom
2) Install cm10-2 via TWRP
Click to expand...
Click to collapse
OK, you caught me. I'm obviously trying to jump ahead too fast. I currently have cm7-2 installed.
I've just installed the Defy TWRP using the manual instructions for the Defy on theunlockr.com.
Thanks for you help mak_v_
sjbonner said:
OK, you caught me. I'm obviously trying to jump ahead too fast. I currently have cm7-2 installed.
I've just installed the Defy TWRP using the manual instructions for the Defy on theunlockr.com.
Thanks for you help mak_v_
Click to expand...
Click to collapse
Waiting for KitKat for Bravo. quarx has new build for Defy\Defy+ /same hardware/
cm-11 ready to test...so not for daily use. Some bugs detected.
Need to clean more spase before install gapps (on /system). (yo can delete sounds like alarms, notifications, etc.)
question cm11
mak_v_ said:
cm-11 ready to test...so not for daily use. Some bugs detected.
Need to clean more spase before install gapps (on /system). (yo can delete sounds like alarms, notifications, etc.)
Click to expand...
Click to collapse
Hi I have a question, as you have managed to install the cm11 on the motorola bravo?
dragonpoot said:
Hi I have a question, as you have managed to install the cm11 on the motorola bravo?
Click to expand...
Click to collapse
by hands...
Just look at defy.bytekiste.de
---------- Post added at 01:38 PM ---------- Previous post was at 01:29 PM ----------
For motorola bravo is cm11-nightly-kobe with 2/6-kernel or cm11-nightly-kobe+3.0Kernel if u want to install 3.0-testing kernel.
Related
UPDATE: 7.1 "stable" is OK but personally I prefer nightlies.
They are not stable! In fact RC1 boot loops! Please flash the latest nightly and google apps going forward!
Nightlies available here:
http://download.cyanogenmod.com/?type=nightly&device=speedy
Change log and link to nightlies here as well:
http://cm-nightlies.appspot.com/?device=speedy
Gapps here:
http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip
http://goo-inside.me/gapps/gapps-gb-20110828-newtalk-signed.zip
1) Copy zips to sd card
2) Backup with ti backup
3) Flash latest clockwork recovery through rom manager
4) Reboot into clockwork recover and run backup from clockwork recovery (aka nandroid)
5) mount usb storage in clockwork recovery and copy ti backups and clockwork recovery backup to your computer. Also copy any other important files on the sdcard (Especially pictures in the DCIM folder).
6) Copy nightly and gapps zips file to phone's sdcard
7) Wipe cache, wipe dalvik cache (under advanced), wipe battery stats
8) Install zips from sd card in this order:
a) CM_Speedyxxx.zip
b) googleapps 828-signed.zip
c) newtalk.zip
9) Reboot phone and wait 10 minutes phone should be in cm7 and working.
10) verify you can open market.
11) If you have problems try starting back at step 7 in clockwork and wipe data/factory reset
Questions/problems should be posted here:
http://forum.xda-developers.com/showthread.php?t=1001578
Optimal settings for CM7 on Sprint here (work in progress):
http://forum.xda-developers.com/showthread.php?t=1262313
These builds may be marked as Rc1 and stable but they are way old and NOT stable.
Before you ask, as of right now the nightlies are the most stable version of CM7 being release right now.
bump.
Please sticky this.
I agree with these not being stable, and the nightlies are far more stable. But you might want to revise the bootlooping on RC1 statement. It can be stopped from bootlooping by flash it, full wipe while its flashed, flashing gaps, and then it will work fine. I haven't tried another kernel after doing that though.
linuxman008 said:
I agree with these not being stable, and the nightlies are far more stable. But you might want to revise the bootlooping on RC1 statement. It can be stopped from bootlooping by flash it, full wipe while its flashed, flashing gaps, and then it will work fine. I haven't tried another kernel after doing that though.
Click to expand...
Click to collapse
Pointless. Just like flashing RC1.
VICODAN said:
Pointless. Just like flashing RC1.
Click to expand...
Click to collapse
Eh, I use mikshift anyway, but when It came out, it was the only rom I had on my sd card, and I needed to make a phone call, so I was forced to make it work. That method saved my life, or at least made it so I could get a ride home, other than that, I wouldn't use it.
In fact, the only reason I would consider the "stables" would be so that I can not have to pay so that I can get updates (with the only paid roms for the shift being the nightlies, I think there is no reason to buy full rom manager)
You don't have to pay for the nightlies, don't know if you are aware of the mirror for the nightlies, but no pay there. Only have to pay if you want to download thru rom manager. Just thought i'd point thay out
Sent from my PG06100 using Tapatalk
linuxman008 said:
In fact, the only reason I would consider the "stables" would be so that I can not have to pay so that I can get updates (with the only paid roms for the shift being the nightlies, I think there is no reason to buy full rom manager)
Click to expand...
Click to collapse
perhaps you missed this thread
http://forum.xda-developers.com/showthread.php?t=1001578
....
cm7 never charges for anything - even with all the crazy amounts of bandwidth they use...
Just to confirm, it's preferable to flash the nightly rather than CyanogenMod 7 for the HTC Evo Shift 4G :: V7.1.0 (9 Oct 2011) just posted?
sdk234 said:
Just to confirm, it's preferable to flash the nightly rather than CyanogenMod 7 for the HTC Evo Shift 4G :: V7.1.0 (9 Oct 2011) just posted?
Click to expand...
Click to collapse
Yes, I'd still rather flash a nightly.
I'm 100% sure 7.1.0 Oct 9 2011 has bugs. Maybe not the bootloop 7.1 RC1 had but nightlies usually have newer features and more bugfixes than any milestone release.
VICODAN said:
Yes, I'd still rather flash a nightly.
I'm 100% sure 7.1.0 Oct 9 2011 has bugs. Maybe not the bootloop 7.1 RC1 had but nightlies usually have newer features and more bugfixes than any milestone release.
Click to expand...
Click to collapse
You're 100% sure CM7.1 has bugs? Have you used 7.1?
I'm using update-cm-7.1.0-Speedy-signed.zip, released 10/9, without issue. OC'd to 1.5 gHz, using ScaryKernel 3.
jesusice said:
You're 100% sure CM7.1 has bugs? Have you used 7.1?
Click to expand...
Click to collapse
Keyboard shortcuts.
Bug.
VICODAN said:
Keyboard shortcuts.
Bug.
Click to expand...
Click to collapse
So, you HAVE used CM7.1? Can you elaborate more as to what the bug is?
This thread was needed when our last RC was months old but it's now outdated and no longer needed. It should be unsticked. CM7.1 is rock solid.
jesusice said:
So, you HAVE used CM7.1? Can you elaborate more as to what the bug is?
This thread was needed when our last RC was months old but it's now outdated and no longer needed. It should be unsticked. CM7.1 is rock solid.
Click to expand...
Click to collapse
You remember that bug when you opened the keyboard and pressed e and it opened email? The one that was only fixable on a reboot?
I have not flashed it. Why would I? How is it different than a nightly? It's a nightly build that's labeled "stable".
VICODAN said:
I'm 100% sure 7.1.0 Oct 9 2011 has bugs. Maybe not the bootloop 7.1 RC1 had but nightlies usually have newer features and more bugfixes than any milestone release.
Click to expand...
Click to collapse
VICODAN said:
You remember that bug when you opened
I have not flashed it. Why would I? How is it different than a nightly? It's a nightly build that's labeled "stable".
Click to expand...
Click to collapse
If you haven't flashed it then you should avoid advising others not to flash it. And I have had that weird KB issue before but not in the last month or more, so I wouldn't assume a bug that you once had is still present in a ROM that you haven't flashed yet. And if it's no different than a nightly build, what's the point of telling people not to flash it but to instead flash a nightly? People should flash CM7.1 if they want to have official support. Bug reports on nightlies are laughed at.
Again, this PSA is outdated and unneeded now.
jesusice said:
If you haven't flashed it then you should avoid advising others not to flash it. And I have had that weird KB issue before but not in the last month or more, so I wouldn't assume a bug that you once had is still present in a ROM that you haven't flashed yet. And if it's no different than a nightly build, what's the point of telling people not to flash it but to instead flash a nightly? People should flash CM7.1 if they want to have official support. Bug reports on nightlies are laughed at.
Again, this PSA is outdated and unneeded now.
Click to expand...
Click to collapse
Changed the thread title, updated OP.
VICODAN said:
Changed the thread title, updated OP.
Click to expand...
Click to collapse
Works for me
The only bugs that I've noticed are with Music Folder Player Free and a one time bug with the camera.
Music Folder Player Free - With the screen on songs play fine until I go to scroll through a folder/list of songs or if the screen is rotated. It starts to stutter and skip while I'm interacting within the program. With the screen off music will randomly stutter and skip and get worse as the song plays. Stock Android music player doesn't have this issue.
Camera - I tried to take a picture today and my phone seemed to lockup; none of the capacitive buttons would work and a menu pop-up didn't go away. When I pulled my phone back out of my pocket the screen was completely garbled and grainy. Had to pull the battery, but afterward everything was fine again.
Philpot85 said:
The only bugs that I've noticed are with Music Folder Player Free and a one time bug with the camera.
Music Folder Player Free - With the screen on songs play fine until I go to scroll through a folder/list of songs or if the screen is rotated. It starts to stutter and skip while I'm interacting within the program. With the screen off music will randomly stutter and skip and get worse as the song plays. Stock Android music player doesn't have this issue.
Camera - I tried to take a picture today and my phone seemed to lockup; none of the capacitive buttons would work and a menu pop-up didn't go away. When I pulled my phone back out of my pocket the screen was completely garbled and grainy. Had to pull the battery, but afterward everything was fine again.
Click to expand...
Click to collapse
You could always try a nightly?
Why is the latest 7.1.0 stable for Speedy not posted on Cyanogen Mirror Network? I grabbed it elsewhere not long after it came out, but seems weird that it still does not show up there.
Hi all,
I have built the CM 10.2 or JB4.3 ROM from CM sources.
Everything else works well except for the GPS. NO MORE BOOTLOOP WHEN GPS IS TURNED ON.
Here are the things you should do to flash this ROM
.
1. Take a Nandroid backup of your current ROM.
2. Do a factory/data reset.
3. Flash the Rom.
4. Flash Gapps.
5. Reboot.
ROM
https://dl.dropboxusercontent.com/u/24386061/cm-10.2-20130916-SADANAND-vibrantmtd.zip
Gapps
http://goo.im/gapps/gapps-jb-20130813-signed.zip
Enjoy.
Anyone tried this yet?
TeeJay!! said:
Anyone tried this yet?
Click to expand...
Click to collapse
Go ahead and use this. I am using this ROM as a daily driver. Also, I keep building this ROM everyday to get new changes. I am trying to solve the GPS causing the reboot issue.
In the newer ROMs, I am able to prevent the reboot when you turn on the GPS, but the GPS is still not working. For anyone, not really using the GPS, this ROM should be good enough.
TeeJay!! said:
Anyone tried this yet?
Click to expand...
Click to collapse
If it's the same as here http://forum.xda-developers.com/showthread.php?t=2449951, then yes - I use this rum and quite satisfied!
---------- Post added at 05:21 PM ---------- Previous post was at 05:16 PM ----------
sada23 said:
Go ahead and use this. I am using this ROM as a daily driver. Also, I keep building this ROM everyday to get new changes. I am trying to solve the GPS causing the reboot issue.
In the newer ROMs, I am able to prevent the reboot when you turn on the GPS, but the GPS is still not working. For anyone, not really using the GPS, this ROM should be good enough.
Click to expand...
Click to collapse
Tell me, how often to update, and there is information about the issue officially cyanogenmod? Heard that support Vibrant ceases to 10.1.3 Stable, but the information is not confirmed by any messages on the site.
The development thread can be found here: http://forum.xda-developers.com/showthread.php?t=2516933
DOWNLOADS
Latest nightlies: http://dl.omnirom.org/n7000/
Kernel with Selinux support for flashing: http://asylumrom.com/Asylum/Asylum-Roms/KitKat-4.4/N7000/kerner/
SuperSU flashable zip for root access: http://download.chainfire.eu/supersu/
PA Gapps: http://goo.im/devs/paranoidandroid/roms/gapps
Banks Gapps (if PA Gapps doesnt work for you): http://forum.xda-developers.com/showthread.php?t=2012857
Click to expand...
Click to collapse
Click to expand...
Click to collapse
USEFUL LINKS
Official OmniROM Wiki: http://docs.omnirom.org
Changelog: https://changelog.omnirom.org/#/n7000/next
Click to expand...
Click to collapse
Click to expand...
Click to collapse
KNOWN ISSUES FOR N7000
- Wifi tethering doesn't work Fixed!
- Screen recording doesn't work (but camera recording works just fine!)
- Opendelta sometimes freezes when checking/downloading update (see FAQ)
- Charging while power off doesn't work. Fixed!
- Music playback sometimes stops randomly when using a wired headset. (we need more info on this issue, please report here in this thread if you experience it!)
- MHL Doesn't work (and probably never will).
Click to expand...
Click to collapse
Click to expand...
Click to collapse
FAQ
For those questions that pops up all the time, this will be updated often.
Also, remember to thank those who provides the answers!
Q: How does OpenDelta auto updater work?
AA1973 said:
At first, OpenDelta will check if a Rom Zip is available on your device. If OpenDelta doesn't find it, it will download a Rom. (~170mb) From then, it will only download the difference (delta) and patches the initial Rom zip within internal SD /OpenDelta. Then, after the patch, the Rom zip will be around 280mb, as it is uncompressed.
Click to expand...
Click to collapse
Q: Why does OpenDelta freeze from time to time when trying to update the ROM?
@Chainfire is still working on it:
Chainfire said:
FYI, people still suffering from the OTA updater freezing mid-verify, mid-download or mid-patch, we've found a lot of way how it didn't get fixed Putting the sdcard handling code in debug mode gets rid of the problem, but obviously we don't want to do that in production, eh!
Click to expand...
Click to collapse
Q: I pressed "flash now" but TWRP recovery says "status failed". What do I do now?
AA1973 said:
How about switching your pointer from external storage to *internal storage* within TWRP > INSTALL option?
Click to expand...
Click to collapse
Q: What's the "Flash after update" folder in the OpenDelta folder?
se1988 said:
It's for .zip files you want the openrecoveryscript to flash automatically after flashing a nightly. Take a look at this thread for examples.
Click to expand...
Click to collapse
Q: How do I keep root after flashing nightlies?
se1988 said:
After rooting, open SuperSU app - settings - Install SuperSU backup script.
Click to expand...
Click to collapse
Q: Does this ROM come with call recording?
se1988 said:
No, and it won't. However, this app has been confirmed working for some users: https://play.google.com/store/apps/details?id=polis.app.callrecorder
Click to expand...
Click to collapse
Q: How can I get FM radio on this ROM?
se1988 said:
The only solution is the Spirit FM app: http://forum.xda-developers.com/showthread.php?t=1059296
Click to expand...
Click to collapse
Q: How can I get Samsung stock apps like S-note?
se1988 said:
Go back to Stock ROM or search play store for whatever your needs are. You'll probably find something that's better than Samsung apps anyway. If you're still wondering - OmniRom will not and can never support Samsung stock apps.
Click to expand...
Click to collapse
Q: How can I get soft keys / navigation bar?
AA1973 said:
Soft keys aka navigation bar
Edit build.prop (use preferred ROM Toolbox lite/pro or a suitable root file explorer)
Add the following line at the end:
Code:
qemu.hw.mainkeys=0
You'll get navigation bar / soft keys and the desired layout of lockscreen.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
HOW TO INSTALL
XpLoDWilD said:
First time installing OmniROM to your Galaxy Note, or coming from another ROM:
- Read known issues and FAQs
- Make sure you're running a proper working ClockworkMod-Recovery - WITH SELINUX SUPPORT!
- Copy GApps and OmniROM ZIPs to your SDCard
- Boot into Recovery
- Flash OmniROM zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of OmniROM:
- Copy the OmniROM ZIP to your SDCard
- Boot into Recovery
- Flash the OmniROM zip from SDCard
- Reboot
Click to expand...
Click to collapse
se1988 said:
Also, remember to flash this after flashing ROM for root access: http://download.chainfire.eu/supersu/
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I hope so
General probs I have with Rom
_
I would love to use this rom as my daily driver but due to some issues I have reverted to my previous setup slimsabre.
Phone gets very hot whilst charging - but charges at acceptable rate. I have replaced battery but still same.
Sometimes phone gets very hot even when not in use - I could not find any reason even looking at better batt stats and cpu spy - tried reinstalling rom and gapps only and this still happened - Phone would just become very hot to hold at some random time.
Any help on this appreciated as I do not know what is causing this.
Ingott
_
having really bad battery drain.. using latest raw kernel.. any suggestions? maybe another supported kernel with better batterylife?
ingott77 said:
_
I would love to use this rom as my daily driver but due to some issues I have reverted to my previous setup slimsabre.
Phone gets very hot whilst charging - but charges at acceptable rate. I have replaced battery but still same.
Sometimes phone gets very hot even when not in use - I could not find any reason even looking at better batt stats and cpu spy - tried reinstalling rom and gapps only and this still happened - Phone would just become very hot to hold at some random time.
Any help on this appreciated as I do not know what is causing this.
Ingott
_
Click to expand...
Click to collapse
If you got the new battery cheap off eBay or similar it's a good chance that it's fake. I've had a couple of those, heating up to the point where you're afraid of damages.
Sent from my phone using some app
When I first installed Omni my phone stayed hot for ages. It turned out that Google+, which normally I do not use and have frozen on previous ROMs, was going absolutely nuts doing some sort of background sync and downloading truckloads of data. The app was running in the background for over an hour with the CPU cores pretty much maxed out. Maybe your problem is the same. Maybe not. Eventually G+ finished its evil work and the phone performance and temperature returned to normal.
I ran with the ROM for a few days and it seemed stable, but I've actually reverted to Samsung's latest stock ROM as KitKat really wasn't doing it for me. Basically I saw no tangible benefits but did lose some convenient features and interface changes were definitely a backward step with Omni. Maybe when it's matured and ART is working fully I'll take another run at it.
mosheg91 said:
having really bad battery drain.. using latest raw kernel.. any suggestions? maybe another supported kernel with better batterylife?
Click to expand...
Click to collapse
Why not use omni kernel?
ozgurgundogan said:
Why not use omni kernel?
Click to expand...
Click to collapse
where can i find omni kernel? i didn't know that it exists..
mosheg91 said:
where can i find omni kernel? i didn't know that it exists..
Click to expand...
Click to collapse
When you install omnirom it contains omni kernel too.
ozgurgundogan said:
When you install omnirom it contains omni kernel too.
Click to expand...
Click to collapse
so.. been using that and didn't know that.. any other good kernel which is battery friendly and with good performance as well?
gesture typing is not working for me on aosp keyboard, currently on 15/12/2013 nightly with 14/12/2013 mini modular pa gapps. is it the same for others?? or is it a known bug?
thank you
"Nothing is true" "Everything is permitted"
---------- Post added at 03:50 AM ---------- Previous post was at 03:38 AM ----------
mosheg91 said:
so.. been using that and didn't know that.. any other good kernel which is battery friendly and with good performance as well?
Click to expand...
Click to collapse
Try raw kernel ?
don't know how its performance is but its the only 4.4 kernel for aosp now.
go here http://forum.xda-developers.com/showthread.php?t=2397000
"Nothing is true" "Everything is permitted"
tysonraylee said:
gesture typing is not working for me on aosp keyboard, currently on 15/12/2013 nightly with 14/12/2013 mini modular pa gapps. is it the same for others?? or is it a known bug?
thank you
Click to expand...
Click to collapse
+1 to that!.
mosheg91 said:
so.. been using that and didn't know that.. any other good kernel which is battery friendly and with good performance as well?
Click to expand...
Click to collapse
Omni kernel(with SD access) was only available after flashing ROM since 12th Dec nightly, so it depends what rom you're on right now. Or perhaps you flashed Raw Kernel over it?
I would advise you to do a clean install. There's no other kernel available right now for 4.4 But it should work.
madhugk said:
+1 to that!.
Click to expand...
Click to collapse
i solved it by flashing the Google keyboard from the pa gapps thread.
rebooting the device after clearing the aosp keyboard data didn't work.
the Google keyboard has no difference over the aosp one but has a working gesture typing.
you could do that too
-download Google keyboard zip
-reboot to recovery
-flash the zip
-clear cache and dalvik cache
-reboot
-select Google keyboard from settings->language and input
done
hope it helps
direct keyboard link from pa gapps thread www.androidfilehost.com/?fid=23252070760975522
"Nothing is true" "Everything is permitted"
Guys, a little confused here,
is openDelta already integrated into the 12/15 Nightly?
if so, then why is it trying to download the whole ROM?
I think the first time we use it, it Downloads the entire ROM and then the next time it checks hashes and then only downloads updated files...
please clarify, as I thought It only downlods changed files and checks hash for that.
thought downloading fails midway, tried almost 7-8 times now,
I already increased the screen time on to 30 minues, what else can I do to get it downloaded completely
Unhappy slow charging and poor battery life.. over heating while using mobile interne
First of all many thanks for developing such a good rom. everything is upto the mark the only critical issue i am facing is very very slow charging, and along with very poor battery life i am using build of 12-12-2013. i charge my phone to 100% (it takes almost 6hrs) and it drains within 1hr (normal usage). Also i tried with two other new batteries as well same issue.
And there is one more issue whenever we change the music (forward/play-pause) using headset screen automatically turns on. Screen also turns on automatically sometimes without going on anything.
Phone over heats while running multiple application or using internet
Screen brightness is way to high on automatic setting mode even though i adjusted it with the flux response settings, in the settings of phone.
Guys please help me out i don't know much abt anroid programming and bug fixing please.
gps fix
I had a problem when I wanted to use google map for navigation, I never managed to get a gps fix. (The real problem isn't the first fix but after, it never moove on map)
Does that work for you?
I'm on the nightlie of 15/12.
@techMagnificent
At first, OpenDelta will check if a Rom Zip is available on your device. If OpenDelta doesn't find it, it will download a Rom. (~170mb)
From then, it will only download the difference (delta) and patches the initial Rom zip within internal SD /OpenDelta.
Then, after the patch, the Rom zip will be around 280mb, as it is uncompressed.
For battery drain. Install better battery stats as system app (settings > advanced) which you can find on xda. Check which app and service is driving your phone nuts.
GALAXY NOTE N7000 // KITKAT 4.4.2 // OMNI
AA1973 said:
@techMagnificent
At first, OpenDelta will check if a Rom Zip is available on your device. If OpenDelta doesn't find it, it will download a Rom. (~170mb)
From then, it will only download the difference (delta) and patches the initial Rom zip within internal SD /OpenDelta.
Then, after the patch, the Rom zip will be around 280mb, as it is uncompressed.
For battery drain. Install better battery stats as system app (settings > advanced) which you can find on xda. Check which app and service is driving your phone nuts.
GALAXY NOTE N7000 // KITKAT 4.4.2 // OMNI
Click to expand...
Click to collapse
Added to FAQ in OP. Thanks
chacal1906 said:
I had a problem when I wanted to use google map for navigation, I never managed to get a gps fix. (The real problem isn't the first fix but after, it never moove on map)
Does that work for you?
I'm on the nightlie of 15/12.
Click to expand...
Click to collapse
I never use maps for navigation, but i just got to my destination using Sygic. No problems with gps lock or navigation.
In spite of the declining official and unofficial support and development of our device, there are several new and excellent ROMs available. However, for various reasons, they might not be easy to find, (a couple don't have their own threads on xda, and one is hidden in a q&a thread). I thought it would be helpful to make a Z1c MM resource thread.
1. Vanir - Team Vanir released the first MM ROM for Z1c, (AFAIK), and is currently developing 2 MM roms, Vanir and Commotio. There is no official xda thread for them. Both seem stable and smooth, but as of 5/4, Vanir ROM is still without camera. Update - 5/12 build with working camera, quality similar to other CM.
http://www.emccann.net/nuclearmistake/VanirAOSPNightlies/amami/
http://www.emccann.net/dho/3-Vanir-mirror/4-nighties/
And gapps - http://www.emccann.net/dho/5-Gapps/
G+ page - https://www.google.com/url?q=https:...ggcMAA&usg=AFQjCNGnu0diBIp4Tq1K-8Bap0HCDxw_TQ
2. AOKP - Still no working official build, but may be coming. Meanwhile, @championswimmer has built one.
http://forum.xda-developers.com/son...ent/aokp-mm-6-0-1-unofficial-nightly-t3311699
3. Resurrection Remix - A well known favorite of many. All the customization you could want.
http://forum.xda-developers.com/son...resurrection-remix-marshmallow-amami-t3325195
Update by @david320te - http://forum.xda-developers.com/showpost.php?p=66899475&postcount=121
4. AOSP by @CLINTZ9 - Probably my personal favorite so far. Good camera, and RRO layers support. Latest build is update 4, which has issues in /system. I recommend flashing update 3, with boot IMG from update 4, (make sure to flash sim fix).
Thread also has a build by @munjeni in post #245, which he says shows serious errors in dmesg, and which has the same problems in /system as update 4, (at least non-working auto-rotate).
http://forum.xda-developers.com/sony-xperia-z1-compact/orig-development/aosp-t3317511
5. AOSP by @freexperia - just found out about this, haven't tried yet. No xda thread. Download from fxpblog. Currently only hosted on uploaded.to, so expect 1-2 hour download time. They did finally get around to using AFH with their 5.1 builds, so maybe they'll do that with this one too at some point. Update- been using last build for a day, (5/4 I think), and very solid. Camera is good and everything seems working.
http://fxpblog.co/aosp/aosp-6-0/ (look for Amami).
I deodexed system folders, (7/17 build), if anyone wants - https://drive.google.com/file/d/0B1niPALD2vPedDlSUEs2bHhhUWM/view?usp=drivesdk
6. CM13 - @derf elot took the initiative in the middle of a q&a thread about the lack of CM13 for Z1c, and posted a build. So far so good, and he's working on an update.
http://forum.xda-developers.com/showpost.php?p=66506018&postcount=8
7. Omni by @erikcas - thanks for reminder from @alf-endy. An older build. I tried it when first released, but don't really remember much. Check post #73 here ...
http://forum.xda-developers.com/son...lopment/omnirom-5-1-unofficial-t3190451/page8
8. DU - just posted 5/11, haven't tried yet... Will update. Update 5/12 - ROM is nice and smooth with lots of customization. Camera seems buggy, even though seemed to be able to take good pictures. It just wouldn't yake them sometimes, or flash at the wrong time, etc. Update 5/19. New build, camera improved.
http://forum.xda-developers.com/son...pment/rom-dirty-unicorns-v10-2-amami-t3376938
9. AICP - Personal build by @SpiritCroc. Haven't tried it yet. Update 5/12 - Nice ROM. Everything working well as far as I can tell. Camera quality not so good, probably due to outdated CM camera files.
http://forum.xda-developers.com/showpost.php?p=66814852&postcount=30
Update 7/29 - AICP now has a thread - http://forum.xda-developers.com/son...lopment/rom-aicp-11-0-mm-6-0-1-amami-t3428288
10. CM 13 by @CLINTZ9 posted yesterday, haven't tried yet.
http://forum.xda-developers.com/sony-xperia-z1-compact/orig-development/cm-13-0-amami-t3377635
11. AOSPA by Paranoid Android. Official build just released - https://plus.google.com/+EvanAndersonA/posts/72TLZMj4K5S Flashed today and working well. Camera is good and 3rd-party cameras work. Built-in camera froze on me several times, but other apps didn't. Not much built-in customization options, pretty much straight AOSP, but with CM themes.
12. CM13 by @SouthernPacific - haven't tried it yet, but reports are that in-call echo found in some other custom Roms is fixed here. http://forum.xda-developers.com/sony-xperia-z1-compact/general/rom-cm-13-amami-t3459617
I think that's all I know of so far. Let me know if I missed anything, or other ideas, etc...
p.s. - if there's not a specific gapps link in the ROM thread, you can probably use Opengapps.
https://www.google.com/url?q=http:/...ggbMAA&usg=AFQjCNEV401XzT6BiV_vnUgQH9s9qdQybA
p.p.s. - Here's some links to useful mods/add-ons for AOSP and DU roms:
- Modified kernel and camera upgrade by @maz-1 - http://forum.xda-developers.com/son...kernel-exfat-support-mtkcamera-dirty-t3388396
- NFC files, (not included in AOSP for some reason) - http://forum.xda-developers.com/showpost.php?p=67128642&postcount=68
- There's an issue with gapps on MM, where, if you don't flash gapps with the original clean flash of the rom, Setup Wizard will fc at boot, and you'll be stuck there. If you do boot your rom without gapps, you can either: a) boot into recovery and use file manager to delete setupwizard apk from /system/priv-app, (which will probably work fine, but on one occasion I got bugs with Gplay services after doing that), or, b) just reflash system, (dirty), when flashing gapps, (this seems better, but you'll have to reflash any other system mods you may have made, like supersu or Xposed, etc.).
- to enable using 3rd-party camera apps on Vanir and DU, edit build prop according to this - http://forum.xda-developers.com/showpost.php?p=67783086&postcount=233 (by default, you will get only black screen). Note that this will remove camera api2 features
Great Idea!
Unfortunately the Camera for RR-M has stopped working for me (using at as a daily driver right now). Battery is great, but only after a few days...the first few days were horrible. (No idea why)
I couldn't get AOSP from @cliTNZ9 running, Maybe i'll try the one from @freeexperia
CM13 looks promising, but the Blobs are a few weeks behind, so the camera is also crap...
Haven't tried AOKP.
david320te said:
Great Idea!
I couldn't get AOSP from @CLINTZ9 running, Maybe i'll try the one from @freeexperia
.
Click to expand...
Click to collapse
Look here - http://forum.xda-developers.com/showpost.php?p=66177015&postcount=111 This should get it to boot. If you don't have new BL, you may need to use fastboot to temp-flash kernel and recovery for installing su, etc. With new recovery, just flash ROM, power off, boot into recovery and flash others.
Hi, just to let you'll know - I've been running the 4/24 build of MM from fxp, and it runs great! I haven't even gotten a reboot for a few days now (but it still happens randomly). Also, there's isn't any auto-rotation issue. The only thing not working from what I can tell is the NFC and FM radio chip. Camera is excellent for it not being official.
MicroClue said:
Hi, just to let you'll know - I've been running the 4/24 build of MM from fxp, and it runs great! I haven't even gotten a reboot for a few days now (but it still happens randomly). Also, there's isn't any auto-rotation issue. The only thing not working from what I can tell is the NFC and FM radio chip. Camera is excellent for it not being official.
Click to expand...
Click to collapse
Good to hear. Interesting about NFC - I haven't even seen it in settings options yet on AOSP, never mind working. I wondered if it was phasing out or something... I've also been impressed with current AOSP camera. Funny BC they never got anywhere with the camera on LP
Thanks for your instruction.
But you know how is instruction to flash vanir?
Need I the boot.img?
Thanks
Sent from my Xperia Z1 Compact using XDA-Developers mobile app
Jesusnagler said:
Thanks for your instruction.
But you know how is instruction to flash vanir?
Need I the boot.img?
Thanks
Sent from my Xperia Z1 Compact using XDA-Developers mobile app
Click to expand...
Click to collapse
Full wipe, flash ROM zip, flash gapps zip, reboot.
Thanks
Has any one test it
Sent from my Xperia Z1 Compact using XDA-Developers mobile app
download from uploaded.to is a nightmare
Could anyone that is happy with their sound/volume upload the ’mixer_paths.xml’, please!! It can be found in '/system/etc
I've tried a couple MM roms now (currently testing aosp from fxp), but outgoing calls are always too low and the other person can hear their echo if I put them on speaker.
So please check this before posting anything..
Thanks a lot!
Thanks! Someone has tried Omni-6.0.1 by erikcas?
Jesusnagler said:
Thanks
Has any one test it
Sent from my Xperia Z1 Compact using XDA-Developers mobile app
Click to expand...
Click to collapse
As is stated, Vanir ROMs are very good but still no working camera. I've been in communication on G+, and dev has linked me a teat version. Going to try today.
alf-endy said:
Thanks! Someone has tried Omni-6.0.1 by erikcas?
Click to expand...
Click to collapse
Thanks for info. I loved his Omni 5.1, (he was also the first to get AOSP camera going on 5.1), but I haven't seen an update to the thread for quite a while. Have a link?
alf-endy said:
Thanks! Someone has tried Omni-6.0.1 by erikcas?
Click to expand...
Click to collapse
I got your pm. Funny thing - I actually did know about that, I even posted there after trying it out. I just forgot. I'll update op with your link.
Ænimal said:
Could anyone that is happy with their sound/volume upload the ’mixer_paths.xml’, please!! It can be found in '/system/etc
I've tried a couple MM roms now (currently testing aosp from fxp), but outgoing calls are always too low and the other person can hear their echo if I put them on speaker.
So please check this before posting anything..
Thanks a lot!
Click to expand...
Click to collapse
just tried FXP s AOSP_M_160502_amami
(i believe it is the latest)
and the problem with the other person hearing his echo still there.
if you do something with sound post it pls:good:
broky said:
just tried FXP s AOSP_M_160502_amami
(i believe it is the latest)
and the problem with the other person hearing his echo still there.
if you do something with sound post it pls:good:
Click to expand...
Click to collapse
That's the rom I'm on right now. Will try mixer_paths.xml's from lollipop roms as well, if I find an old backup.. Let's hope devs will look into it for future releases.
Currently testing AOSP from freexperia. So far so good. Camera is good and everybody working.
levone1 said:
Currently testing AOSP from freexperia. So far so good. Camera is good and everybody working.
Click to expand...
Click to collapse
I'm really interested. Please keep us posted how it goes and if there are any bugs or things not working, like Bluetooth, NFC etc.
Sent from my Xperia Z1 Compact with XDA app.
skyhirules said:
I'm really interested. Please keep us posted how it goes and if there are any bugs or things not working, like Bluetooth, NFC etc.
Sent from my Xperia Z1 Compact with XDA app.
Click to expand...
Click to collapse
So far, 1 random reboot, with no mods to system. Besides that, no problems. BT seems good, (screenshot). As far as NFC, I have not seen NFC option in settings on any AOSP MM build yet, not sure why.
levone1 said:
So far, 1 random reboot, with no mods to system. Besides that, no problems. BT seems good, (screenshot). As far as NFC, I have not seen NFC option in settings on any AOSP MM build yet, not sure why.
Click to expand...
Click to collapse
As others pointed it out specifically, how is call quality?
Howdy...
Starting today Timur announces on his website his final "ROM modification" "Timur's Kernel" in it's latest version for stock Android 6.0.1 MOB30X as a xmas giveaway until January 21st, 2017. It's availavle for the Nexus 7 (2013) Flo and Deb:
https://timur.mobi/timurs-kernel-v4/
You may also find it rather amusing, that he's giving access to the sources on github:
https://github.com/mehrvarz/msm-marshmallow-tm-usbhost-charge
As this is not my work, all credits goes to Timur Mehrvarz.
Regards
Shinson
Will this work with f2fs?
thanks for the info! I tested an older Version of Timurs Kernel - v4.0 beta2 for Android 6.0.1 "MMB29V" (03/2016) - and i cant say i was that happy with it.
But i will give it a second try.
Errors in v4.0 beta2 fixed in final?
mariosmax said:
I tested an older Version [v4.0 beta2] - and i cant say i was that happy with it.
Click to expand...
Click to collapse
What kind of problems do you run into!?
SGH-i200 said:
What kind of problems do you run into!?
Click to expand...
Click to collapse
it wasnt so stable to be honest it crashed 2-3 times in one day.
Can I install this kernel on Pure Rom 6.0.1 or I must install the factory image 6.0.1 first? I'd like to stay on PureRom..
Anta said:
Can I install this kernel on Pure Rom 6.0.1 or I must install the factory image 6.0.1 first? I'd like to stay on PureRom..
Click to expand...
Click to collapse
No answers? come on
Anta said:
No answers? come on
Click to expand...
Click to collapse
Seems pretty apparent that nobody knows... Why don't you try it and let us know?
Been testing this Kernel out for a couple weeks now, was aiming for a permanent install but decided to test it out before I went ahead and made the mods to the center console. My hardware includes a UCA202, a Sweex 4 Port USB Hub, a USB2.0 Digital DVB-T SDR+DAB+FM HDTV TV Tuner Receiver Stick RTL2832U+R820T all bought from Amazon. Now am not sure if my hardware is just plain crap coz am forced to reboot the tablet quite a lot. USB communications drops a lot, while poweramp can regain communication with USB and continue to send signal to the amp I always have to reboot for wavesink and SDRtouch to regain communication with the DVB dongle. At this stage I've ruled out permanent install.
What is everybody else's experience?
Can't the features be extracted and implemented to other roms?
Slightly off topic -> has anyone used the 2013 for a dash install and found anything with reasonable battery life?
im DL'ing this kernel right now for a test run, but has anyone used any rom/kernel combo that can stay in standby for more than a few days?
xellion said:
Slightly off topic -> has anyone used the 2013 for a dash install and found anything with reasonable battery life?
Click to expand...
Click to collapse
Plesse ask the guys in the car install thread:
https://forum.xda-developers.com/showthread.php?t=2753941
xellion said:
Slightly off topic -> has anyone used the 2013 for a dash install and found anything with reasonable battery life?
im DL'ing this kernel right now for a test run, but has anyone used any rom/kernel combo that can stay in standby for more than a few days?
Click to expand...
Click to collapse
It depends. I've had it, with Lollipop, lose 2% over 48hours on my stripped system. That's unusual though.
Anta said:
Can I install this kernel on Pure Rom 6.0.1 or I must install the factory image 6.0.1 first? I'd like to stay on PureRom..
Click to expand...
Click to collapse
It may work but he doesn't recommend it and wouldn't support issues.
where do you get these files?
USBHost kernel (flo601) + service installer.....aka, timur-services + timur-usbhost
With TWRP recovery running, the tablet should now appear as a USB drive on your PC. This lets you copy the three zip archives required for the next step over: timur-services, timur-usbhost and SuperSU. Make sure these three files are available on the tablet's internal sdcard. Then install the three zip files (timur-services + timur-usbhost before SuperSU!), using the TWRP on-screen UI. Note that whenever you update the kernel (usbhost), you will also need to re-install SuperSU afterwards. - OK, done. You can now restart system and boot into Android OS.
Click to expand...
Click to collapse
I'm also getting error during install..."Could not find 'META-INF/com/google/android/update-binary' in the zip file. error installing zip file '/sdcard/1_ROMs/Nexus7 2013/timur-kernel-n7-2013-v4.0-final-flo.zip'
on PureNexus 6.0.1-20160821-OFFICIAL.zip
File download locations
I guys I am trying to locate the files for this Rom can anyone point me to the right location to download them I have the second gen 2013 nexus 7
Look here:
timur-m
https://www.reddit.com/user/timur-m
Reddit
https://www.reddit.com/r/timurskernel/
Timur's Kernel v4.0 for Android 6.0.1 MOB30X
https://www.reddit.com/r/timurskernel/comments/51lhgf/v40_for_android_601/
timur-kernel
https://www.reddit.com/r/timurskernel/comments/5x96uo/new_download_locations/
hachiroku said:
where do you get these files?
USBHost kernel (flo601) + service installer.....aka, timur-services + timur-usbhost
I'm also getting error during install..."Could not find 'META-INF/com/google/android/update-binary' in the zip file. error installing zip file '/sdcard/1_ROMs/Nexus7 2013/timur-kernel-n7-2013-v4.0-final-flo.zip'
on PureNexus 6.0.1-20160821-OFFICIAL.zip
Click to expand...
Click to collapse
Did you unpack the zip file in windows first? Should end up with two separate zips that can then be flashed with twrp...
didn't use Timur...went with elementalX v5.16
I use an Arduino Leonardo as Keyboard.
If I wake my Tablet and have the Arduino connected it will show 1 sek the wake Video and then it starts the suspend Video. And It show the connected USB device "Arduino Dll" although I don't aktivated the option to show the divces.
After the video is over, everything is okay.
It only happen if I have the Arduino connected.
If I have my extern usb soundcard connected it only have the error that it shows the USB devices on start although i haven't activated it.
Is there a fix?
hachiroku said:
didn't use Timur...went with elementalX v5.16
Click to expand...
Click to collapse
Timur is the only kernel that works with OTTG+Charge and on/off auto detect. Has the elementalx fixed all these issues?
---------- Post added at 03:01 AM ---------- Previous post was at 02:59 AM ----------
And the hardware is really old, and the battery aged. Are there any replacement tablet model good for fixed install?