Database Users

How to prevent update/block update

I've been reading a couple of threads on preventing OTA updates and can't seem to figure it out. I'm more interested in the sqlite & ADB method from this thread (http://forum.xda-developers.com/showthread.php?t=933291). I read this thread about 10 times over and over but can't seem to get it to work. Can someone that's knowledgeable please put instructions that an idiot like me can follow?
I have a rooted NC with firmware 1.2.
1. I've downloaded sqlite3 and nookcolor-easyADB to my PC.
2. I've extracted nookcolor-easyADB and install the install.vbs file.
3. Connected my NC to my PC via USB cable
4. My PC recognizes my NC and the microSD card as a different drive.
i followed the following steps from the thread and nothing works:
***************************************************************
Attached is a working sqlite3 binary.
Copy it to /system/bin
(I transfered it to my SD, then used rootexplorer (mount R/W) to copy into /system/bin))
you will now be able to edit sqlite databases on the nook itself.
--------------------------------------------------------------------------------
Attached Files sqlite3.7z (11.9 KB, 56 views)
--------------------------------------------------------------------------------
In your terminal:
$ adb pull /data/data/com.bn.devicemanager/databases/devicemanager.db devicemanager.db
$ sqlite3 devicemanager.db
sqlite> update registry set value='manual' where name='com.bn.device.fota.mode';
sqlite> .q
$ adb push devicemanager.db /data/data/com.bn.devicemanager/databases/devicemanager.db
$ adb reboot
Congrats Your NC is now permanently blocked from any future BN OTA auto updates.
No more build.prop spoof hacks for each release (sideload only),,,,,, yada yada
***************************************************************
Questions:
should I create a directory in my PC (C:/windows/system/bin) and copy sqlite3 to the /bin folder or copy sqlite3 to my microSD card and insert it into my NC?
Please be very elementary in your answers (as you were explaining it to your 6 year old). Thanks in advance.

There is a free version of SQLite with graphic user interface that allows you to change the fota field from "auto" to "manual". Do a search of title only for "block" and you should find it.

crazyasian2 said:
I've been reading a couple of threads on preventing OTA updates and can't seem to figure it out. I'm more interested in the sqlite & ADB method from this thread (http://forum.xda-developers.com/showthread.php?t=933291). I read this thread about 10 times over and over but can't seem to get it to work. Can someone that's knowledgeable please put instructions that an idiot like me can follow?
I have a rooted NC with firmware 1.2.
1. I've downloaded sqlite3 and nookcolor-easyADB to my PC.
2. I've extracted nookcolor-easyADB and install the install.vbs file.
3. Connected my NC to my PC via USB cable
4. My PC recognizes my NC and the microSD card as a different drive.
i followed the following steps from the thread and nothing works:
***************************************************************
Attached is a working sqlite3 binary.
Copy it to /system/bin
(I transfered it to my SD, then used rootexplorer (mount R/W) to copy into /system/bin))
you will now be able to edit sqlite databases on the nook itself.
--------------------------------------------------------------------------------
Attached Files sqlite3.7z (11.9 KB, 56 views)
--------------------------------------------------------------------------------
In your terminal:
$ adb pull /data/data/com.bn.devicemanager/databases/devicemanager.db devicemanager.db
$ sqlite3 devicemanager.db
sqlite> update registry set value='manual' where name='com.bn.device.fota.mode';
sqlite> .q
$ adb push devicemanager.db /data/data/com.bn.devicemanager/databases/devicemanager.db
$ adb reboot
Congrats Your NC is now permanently blocked from any future BN OTA auto updates.
No more build.prop spoof hacks for each release (sideload only),,,,,, yada yada
***************************************************************
Questions:
should I create a directory in my PC (C:/windows/system/bin) and copy sqlite3 to the /bin folder or copy sqlite3 to my microSD card and insert it into my NC?
Please be very elementary in your answers (as you were explaining it to your 6 year old). Thanks in advance.
Click to expand...
Click to collapse
1. Go here and get the sqllite browser and throw it in a directory on your pc.
2. Use adb and pull the database file from your nook to your pc (like the instructions you quoted).
3. Use the sqllite browser and make the changes and save them.
4. Use adb and push the file back to your nook.
5. Reboot your nook
6. Enjoy being free from updates.

Here's the idiot's guide that worked for me:
1. Go download the following 2 files:
nookcolor-easyADB.zip
sqlitebrowser_200_b1_win.zip
2. Extract “nookcolor-easyADB.zip
this will create a file “.android” in the following directory C:/Users/your_user_account
extract “sqlitebrowser_200_b1_win.zip” anywhere
3. Connect your NC to your PC via USB port.
4. Open the command prompt (it’s in your program, accessories directory)
You should have a prompt that looks like this – C:\Users\your_user_name>
5. Type the following command:
adb pull /data/data/com.bn.devicemanager/databases/devicemanager.db devicemanager.db
This command will go grab the file “devicemanager.db” from your NC and place it in the following location: C:/Users/your_user_account on your PC.
6. Now go to the directory where you extracted “sqlitebrowser_200_b1_win.zip” and double click on the file “SQLite Database Browser 2.0 b1.exe”. This will run the browser that will allow you to open the file “devicemanager.db” and edit it.
7. In the browser click file/open database. It should automatically take you to where the file “devicemanager.db” is located. Select that file.
8. Click on the “Browse Data” tab.
9. Click on the “Table:” pull down menu and click on “registry’.
10. If you look at line 7, all the way to the right is the “value” column it should say “auto”.
11. Double click on “auto” and another window will pop up.
12. Change the word “auto” to “manual”.
13. Click on “Apply changes” and close the window.
14. Click on “save” button on the top left and close the browser.
15. Go back to the command prompt and type the following:
adb push devicemanager.db /data/data/com.bn.devicemanager/databases/devicemanager.db
This command will push the file “devicemanager.db” from your PC back to your NC with the updated file.
16. Type the following command to reboot your NC:
adb reboot
DONE!

I would think the simplest method, using materials you should be halfway familiar with from rooting, is to install ClockworkMod Recovery to your NC. I know it will stop the update from installing, but I'm not sure if the update would quit trying to install.
The simplest ways to get CWM on your NC are:
1) get the ROM Manager app and "Flash ClockworkMod Recovery"
2) if you have a CM7 sdcard, it probably already has ROM Manager, and flashing from there will also install CWM to your internal recovery.

Taosaur said:
I would think the simplest method, using materials you should be halfway familiar with from rooting, is to install ClockworkMod Recovery to your NC. I know it will stop the update from installing, but I'm not sure if the update would quit trying to install.
The simplest ways to get CWM on your NC are:
1) get the ROM Manager app and "Flash ClockworkMod Recovery"
2) if you have a CM7 sdcard, it probably already has ROM Manager, and flashing from there will also install CWM to your internal recovery.
Click to expand...
Click to collapse
This is my thinking as well. B&N tried pushing the update to me and a coworker yesterday. CWR blocked it as expected. Rebooted and all is well. As you mentioned, time will tell if B&N will continue to try to push v1.3 to me. If it becomes obnoxious, I may go this route.

[Q] Can't Side Load Apps on Root NST Glow

I recently rooted my Nook Simple Touch Glow and when I try to side load apps through dropbox I get an error "Install Blocked; For security reasons you phone is set to block installation of applications not sourced in the Android Market."
I've read up and there should be a check box in the applications menu that allows unknown sources. The trouble is there is no applications menu.
Any idea on how to fix this?
Thanks in advance!

If you have sqlite3 on your desktop or your Nook, you can just do:
Code:
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
sqlite3 settings.db
update secure set value=1 where name='install_non_market_apps';
.q
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db

Sqlite
I haven't used Sqlite before. I downloaded it. Do I just run the text you posted in the dos box?
Also, do I need to have the nook attached through usb?

Well, you have to have ADB working however you use ADB.
That's either WiFi or USB.
The quoted code is normally what you enter.

check in dos box that you have sqlite3 command available. Also you need working android debug bridge (adb) working, through wifi or usb, in your case it would probably be through wifi. I do not recommend you to continoe unless you learn something about adb and make it work. (search forum or use google)
the rest is piece of cake. first (adb) command from #2 downloads one database from nook. Another 3 commands opens that database locally, changes the security setings that enables installation of non-market application and quits sqlite3 client.
last command uploads the changed database back to nook.

ADB?
Thanks for getting back to me. Unfortunately, I really don't know what ADB is.
I haven't used any of these tools. Can you give me a little more detail? I'd hate to make a mistake and screw something up.
Thanks again!
Mark

Sqlite
Thanks for the instructions. I was able to turn on the ADB bridge using adbWireless and connect the device.
I'm confused about the command line in SQLite3. I entered everything as listed, but nothing happens. I don't want to copy over the settings.db until I know it has been changed.
What should SQLite say if I have entered in the command properly?
Thanks again

Code:
sqlite3 settings.db
update secure set value=1 where name='install_non_market_apps';
select value from secure where name='install_non_market_apps';
.q
As you can see I have added one 'select' command into sql section. If your database has been updated properly, select command should print new value 1 (before zero).
I have written this command right now, don't have a chance to test it but it should work.. at least it cannot screw up anything.

Sqlite
I'm entering everything as is and either I get
...> with nothing after it
or
Error: near "sqlite3": syntax error.
In either case, the select command does not tell me if it is updated.
Again, sorry for asking so many times. I'm close!!

Sqlite
I figured out what I was doing. I opened the SqLite window separately when it should have all be in the one cmd window.
So what exactly did this do? I keep getting the same error message that it can't install non market apps. Is there a menu setting I should change?
Thanks again

Got it
Just rebooted and now it's working. Thanks!!

A simpler way to do this, assuming you've used something like GlowNooter and is to go into Nook Color Tools and uncheck and recheck the Non-Market Installs. This will allow you to sideload.

[FIX] HDX 8.9 Bootloop Brick Recovery Steps...

I have successfully recovered the Kindle Fire HDX 8.9 from the soft brick which occurs from removing or altering system files.
THIS IS SPECIFICALLY FOR THOSE THAT REMOVED (PERSONALLY OR VIA SCRIPT) SOMETHING FROM THE SYSTEM PARTITION OR MESSED WITH THE BUILD.PROP. This guide focuses on a fix for ONE specific issue, so read it, determine what your issue is & then make the necesarry changes, or ask what changes need to be made. I have a bit of time over the next few days before going back to my job as a mechanical engineer, which means come the second week of January, I will be EXTREMELY busy.
I will be available via hangouts & IRC to guide you through recovery of your device when possible. The IRC channel will be #HDX & I will occasionally check in.
To recover your device, you must be rooted. Rooting may be possible while in boot loop, but it is VERY difficult & everything is about timing.
Firstly, you need to have everything from the root post by jcase to get started. You will also need adb & the Android SDK installed. Since it seems most of you are on Windows, I have forgone my linux distro & focused on finding a Windows solution, though this should work on Linux or Mac as well.
My particular brick was on purpose. It was based on the softbrick that can occur when using the root/Play store script by Ptiwee that is found here: http://forum.xda-developers.com/showpost.php?p=48739126&postcount=1
In this instance, if any part of the odex removal/replacement fails, you will be stuck in a bootloop. If you factory reset after being stuck, you complicate issues, because init is not able to complete & you then have an empty /data partition. This means that the fix differs depending on whether or not you did indeed perform a factory reset from the HDX recovery menu.
If you did perform a reset, then you need to do the following:
Download the HDX 8.9 root & follow jcase instructions from here: http://forum.xda-developers.com/showthread.php?t=2542456.
It will fail because the /data/local/tmp directory does not exist yet.
After completing these steps & failing, open cmd prompt & issue "adb shell" command.
Issue "su" command.
In the SU shell, issue the following set of commands:
mkdir /data
mkdir /data/local
mkdir /data/local/tmp
chmod 755 /data
chmod 755 /data/local
chmod 755 /data/local/tmp
adb shell
su
mount -o rw,remount /system
I then ran through the exploit from jcase again.
Then I opened a cmd window & did the following
adb root
adb shell
su
mount -o remount /system
This is where things get specific for my issue, which was the new services.odex that the ptiwee script installed.
for this issue, I opend a second terminal window & did the following:
adb push services.odex /data/local/tmp/services.odex
adb push DownloadProvider.odex /data/local/tmp/DownloadProvider.odex
adb push DownloadProviderUi.odex /data/local/tmp/DownloadProviderUi.odex
Now go back to your first cmd shell window & do the following (you may need to unplug the usb cable & quickly reinsert it):
adb shell
su
mount -o remount /system
exit
chmod 755 /data/local/tmp/services.odex
chmod 755 /data/local/tmp/DownloadProvider.odex
chmod 755 /data/local/tmp/DownloadProviderUi.odex
su
rm /system/framework/services.odex
cp /data/local/tmp/services.odex /system/framework/services.odex
chmod 755 /system/framework/services.odex
(for me on this issue, which was confirmed via logcat in Linux using Qtadb, the device screeen fully booted at this point, by itself)
However, you may need to also do this:
cp /data/local/tmp/DownloadProvider.odex /system/app/DownloadProvider.odex
cp /data/local/tmp/DownloadProviderUi.odex /system/app/DownloadProviderUi.odex
This would also apply to a modified build.prop bootloop. You would of course change the file you are move & chmod to build.prop & adjust the target directory accordingly.
My device is 100% working again & using this info, if you are stuck in a bootloop from changing, removing or whatever files, you should be able to similarly recover using a modified version of the data above.
Again, you really need to know what you were doing that caused the issue in the first place, but if you have a good idea what did it, then chances are you can recover.
Now hit thanks & let me know how you goofed up your device & we'll see if we can't fix it.S

Thanks for this. I tried this method to get google play working, which was no doubt something I did wrong in the process as others had success there (could be 8.9 vs 7 but I was willing to try). It was stuck with the orange Fire logo lit, but luckily ADB still recognized it, though windows wouldn't detect it as a USB drive. I had an issue when replacing services.odex with another, and this caused mine to immediately crash and never fully boot right when I changed the file. It was 0 bytes when viewed from the shell.
I was really rattled last night trying to figure out how to get the files back in place, as I could not get su to work from the shell, so permission denied on chmod and any attempt to remount /system as rw. Thankfully, I had the foresight to get the files pulled to my PC before I did the factory reset (I backed up all amazon files I was changing). Your instructions got me going again, and I finally got su to work and put those files back in place. It still wouldn't boot, so I did another factory reset (desperation) and re-rooted it.
Unfortunately, where it was once to the point with the Fire lit up, it vanishes when it would normally do that and is now stuck on a blank screen, though still recognized by adb. I can even get in the shell, but am at a loss as to what I might do next to get this thing booting. The only files I go around to modifying were DownloadProvider/ui apk and odex, along with services.odex. I'd very much appreciate any advice at this point.
I feel hopeful just to have su and still have access to adb with the files back in place, just confused on how it could be failing at this point. I'm obviously a novice and shouldn't have gone poking around too much until more experienced people had figured the 8.9 out, but I was too excited to get authentication from the Play Store working on this thing and willing to take the risk. If I get it working again, I'll be glad I've done all this, just because of how much I've learned from the process.
Edit: Yesss! chmod 755 on /system/framework did the trick. it was not executable Thank you so much for your effort here.

Followed the guide, Kindle is back again at least works...
But when I try to open the camera app... It never opens and just stays there until it closes... Any ideas?
(Will find more stuff and post just in case)

Poesini said:
Followed the guide, Kindle is back again at least works...
But when I try to open the camera app... It never opens and just stays there until it closes... Any ideas?
(Will find more stuff and post just in case)
Click to expand...
Click to collapse
@Poesini
Once you have it working, to the point of booting into the OS, grab the update.bin from Amazon (update-kindle-14.3.1.0_user_310079820.bin) here:
https://s3.amazonaws.com/kindle-fire-updates/update-kindle-14.3.1.0_user_310079820.bin
Once downloaded, grab a root level file explorer. I use the paid Root Explorer because it has built in root acess, a text editor & a ro/rw toggle button, but others should surely work. Make sure that the /System partition/directory is mounted as RW, then open the file build.prop & edit all the entries that say "310079820" to be"310079819".
You will find them in the build.prop as follows:
ro.build.version.incremental=14.3.1.0_user_310079820
ro.build.version.number=310079820
ro.build.description=apollo-user 4.2.2 JDQ39 14.3.1.0_user_310079820 release-keys
ro.build.fingerprint=Amazon/apollo/apollo:4.2.2/JDQ39/14.3.1.0_user_310079820:user/release-keys
Do not add the parenthesis, just change the last three number to 819 & then be sure to save the file. Open it again to ensure the edits were made, so you are certain that the device directory was indeed RW. Once that is done, make sure the permissions are set to 0644, or rw-r--r-- & check the ownership to make certain the owner & group are both set to "Root". If you do not work on the "live" build.prop, then copy the edited build.prop to the root folder (/) first, then check permissions or change them using adb chown & chmod commands as required.
Again, I suggest copying the file to your PC as a backup, though you will have a copy in the downloaded update.bin (which is just a zip archive). I also suggest using a root explorer with a built in text editor, like Root Explorer.
Once this is done & you are certain the build.prop has been edited, copy the update.bin to the storage (sdcard) root & reboot the device.
Once the device has reboot, go into settings, device, system updates & select the install update button. Follow the directions & the device will reboot again & install the firmware. Any mods made to the System directory will be gone & everything should work again.

chratcliff said:
Thanks for this. I tried this method to get google play working, which was no doubt something I did wrong in the process as others had success there (could be 8.9 vs 7 but I was willing to try). It was stuck with the orange Fire logo lit, but luckily ADB still recognized it, though windows wouldn't detect it as a USB drive. I had an issue when replacing services.odex with another, and this caused mine to immediately crash and never fully boot right when I changed the file. It was 0 bytes when viewed from the shell.
I was really rattled last night trying to figure out how to get the files back in place, as I could not get su to work from the shell, so permission denied on chmod and any attempt to remount /system as rw. Thankfully, I had the foresight to get the files pulled to my PC before I did the factory reset (I backed up all amazon files I was changing). Your instructions got me going again, and I finally got su to work and put those files back in place. It still wouldn't boot, so I did another factory reset (desperation) and re-rooted it.
Unfortunately, where it was once to the point with the Fire lit up, it vanishes when it would normally do that and is now stuck on a blank screen, though still recognized by adb. I can even get in the shell, but am at a loss as to what I might do next to get this thing booting. The only files I go around to modifying were DownloadProvider/ui apk and odex, along with services.odex. I'd very much appreciate any advice at this point.
I feel hopeful just to have su and still have access to adb with the files back in place, just confused on how it could be failing at this point. I'm obviously a novice and shouldn't have gone poking around too much until more experienced people had figured the 8.9 out, but I was too excited to get authentication from the Play Store working on this thing and willing to take the risk. If I get it working again, I'll be glad I've done all this, just because of how much I've learned from the process.
Edit: Yesss! chmod 755 on /system/framework did the trick. it was not executable Thank you so much for your effort here.
Click to expand...
Click to collapse
Glad to get you pointed in the right direction. This is what XDA used to be. How I learned anything at all. I am a mechanical engineer, not a software or hardware guy. Just a guy that will not give up on something broken.
It's all about taking little queues from here & there & then trying to assemble parts of different things into accomplishing what it is you are working on. All of this was based on things I tried or read in the past, working to root devices like the Xoom, etc... After reading about the exploit we had applied (what it is & how it works, some of which was beyond me), I was able to surmise that the exploit we used was still there as was the ability to access root permission, but that the tablet had "forgotten" we had root access rights because of the wipe. We just had to use adb to give it the files "memory" of our access to root & the permission to use them, in essence, tell it what we wanted. Working with a Linux or Android device is like working with the smartest person in the world that is also a 5 year old. It can do anything, yet hasn't the common sense to get it done. We need to provide that for it's brilliance to become useful.
As mentioned above, I highly recommend modding the build.prop & re-flashing the update.bin to have a clean slate.

GSLEON3 said:
Working with a Linux or Android device is like working with the smartest person in the world that is also a 5 year old. It can do anything, yet hasn't the common sense to get it done.
Click to expand...
Click to collapse
This is the damned truth never better spoken lol
Sent from my SPH-L900 using xda app-developers app

GSLEON3 said:
Ahhhhh.... XDA! The thrill of it all, you desperately want something now, you're a smart guy, you can do it & nothing beats that feeling of your sphincter tightening up, your heart racing, as you wait for that device to reboot....wait.....maybe another minute.....okay....crap... what do I do now? I love that feeling! I mean YOLO. Livin' dangerous dog, lol... Okay, I "bricked my device on PURPOSE, since there is a Play Store script in a ceertain tool that seems to be broken, or is missing information from the instructions, such as safestrap, or something.... That part I haven't figured out. I asked the creator to take a look at what he did & in the mean time, this should get you fixed up. It is actually much easier is you were not panicked to the point of factory resetting, but either way, the info below will get you sorted out.
I have successfully recovered the Kindle Fire HDX 8.9 from the soft brick which occurs from removing or altering system files.
THIS IS SPECIFICALLY FOR THOSE THAT REMOVED (PERSONALLY OR VIA SCRIPT) SOMETHING FROM THE SYSTEM PARTITION OR MESSED WITH THE BUILD.PROP. This guide focuses on a fix for ONE specific issue, so read it, determine what your issue is & then make the necesarry changes, or ask what changes need to be made. I have a bit of time over the next few days before going back to my job as a mechanical engineer, which means come the second week of January, I will be EXTREMELY busy.
I will be available via hangouts & IRC to guide you through recovery of your device when possible. The IRC channel will be #HDX & I will occasionally check in.
To recover your device, you must be rooted. Rooting may be possible while in boot loop, but it is VERY difficult & everything is about timing.
Firstly, you need to have everything from the root post by jcase to get started. You will also need adb & the Android SDK installed. Since it seems most of you are on Windows, I have forgone my linux distro & focused on finding a Windows solution, though this should work on Linux or Mac as well.
My particular brick was on purpose. It was based on the softbrick that can occur when using the root/Play store script by Ptiwee that is found here: http://forum.xda-developers.com/showpost.php?p=48739126&postcount=1
In this instance, if any part of the odex removal/replacement fails, you will be stuck in a bootloop. If you factory reset after being stuck, you complicate issues, because init is not able to complete & you then have an empty /data partition. This means that the fix differs depending on whether or not you did indeed perform a factory reset from the HDX recovery menu.
If you did perform a reset, then you need to do the following:
Download the HDX 8.9 root & follow jcase instructions from here: http://forum.xda-developers.com/showthread.php?t=2542456.
It will fail because the /data/local/tmp directory does not exist yet.
After completing these steps & failing, open cmd prompt & issue "adb shell" command.
Issue "su" command.
In the SU shell, issue the following set of commands:
mkdir /data
mkdir /data/local
mkdir /data/local/tmp
chmod 755 /data
chmod 755 /data/local
chmod 755 /data/local/tmp
adb shell
su
mount -o rw,remount /system
I then ran through the exploit from jcase again.
Then I opened a cmd window & did the following
adb root
adb shell
su
mount -o remount /system
This is where things get specific for my issue, which was the new services.odex that the ptiwee script installed.
for this issue, I opend a second terminal window & did the following:
adb push services.odex /data/local/tmp/services.odex
adb push DownloadProvider.odex /data/local/tmp/DownloadProvider.odex
adb push DownloadProviderUi.odex /data/local/tmp/DownloadProviderUi.odex
Now go back to your first cmd shell window & do the following (you may need to unplug the usb cable & quickly reinsert it):
adb shell
su
mount -o remount /system
exit
chmod 755 /data/local/tmp/services.odex
chmod 755 /data/local/tmp/DownloadProvider.odex
chmod 755 /data/local/tmp/DownloadProviderUi.odex
su
rm /system/framework/services.odex
cp /data/local/tmp/services.odex /system/framework/services.odex
chmod 755 /system/framework/services.odex
(for me on this issue, which was confirmed via logcat in Linux using Qtadb, the device screeen fully booted at this point, by itself)
However, you may need to also do this:
cp /data/local/tmp/DownloadProvider.odex /system/app/DownloadProvider.odex
cp /data/local/tmp/DownloadProviderUi.odex /system/app/DownloadProviderUi.odex
This would also apply to a modified build.prop bootloop. You would of course change the file you are move & chmod to build.prop & adjust the target directory accordingly.
My device is 100% working again & using this info, if you are stuck in a bootloop from changing, removing or whatever files, you should be able to similarly recover using a modified version of the data above.
Again, you really need to know what you were doing that caused the issue in the first place, but if you have a good idea what did it, then chances are you can recover.
Now hit thanks & let me know how you goofed up your device & we'll see if we can't fix it.
Click to expand...
Click to collapse
What should I do if I connect my kindle to PC without any reaction? I had done factory reset before. ADB cannot be recognized, nor do any special USB stuff. I thought mine got bricked for build.pro and I can just turn it to original recovey. Can you help me, please?

TOM XIE said:
What should I do if I connect my kindle to PC without any reaction? I had done factory reset before. ADB cannot be recognized, nor do any special USB stuff. I thought mine got bricked for build.pro and I can just turn it to original recovey. Can you help me, please?
Click to expand...
Click to collapse
Need more info & less quote. lol...
Does it turn on at all? What is on the screen? Is it lit, but looks like it's off? What EXACTLY did you change in the build.prop? Even a brick is usually recognized as SOMETHING when the device is attached (at least in Windows), so if nothing is being recognized, you may have an issue with PATH or just a finicky sdk installation. Are you on Windows or Linux?

GSLEON3 said:
Need more info & less quote. lol...
Does it turn on at all? What is on the screen? Is it lit, but looks like it's off? What EXACTLY did you change in the build.prop? Even a brick is usually recognized as SOMETHING when the device is attached (at least in Windows), so if nothing is being recognized, you may have an issue with PATH or just a finicky sdk installation. Are you on Windows or Linux?
Click to expand...
Click to collapse
Thank you for helping me! I followed this http://forum.xda-developers.com/showthread.php?t=2582773 and replaced buil.prop offered. I can turn it on by holding power button for several seconds and it showed the gray "kindle fire" logo for a few seconds,then turn off again.By the way,I am using win7 and I have no idea about PATH and sdk.

Tried, and failed... Since my kindle fire stopped at the sliver kindle fire screen and it reboots again and again, I can't even get the access to adb...
I think maybe I need to request a replacement from Amazon...Or someone could give me a usable System image and fastboot.exe.....
EDIT: Weird....After 10 minute's rebooting, my kindle suddenly works....Everything seems to be fine....

TOM XIE said:
Thank you for helping me! I followed this http://forum.xda-developers.com/showthread.php?t=2582773 and replaced buil.prop offered. I can turn it on by holding power button for several seconds and it showed the gray "kindle fire" logo for a few seconds,then turn off again.By the way,I am using win7 and I have no idea about PATH and sdk.
Click to expand...
Click to collapse
@TOM XIE If you used that build.prop provided in that thread, then you replaces yours with one meant for the 7" HDX. You need to download the update.bin from Amazon & extract it (it is just an archive zip). You will then have wht you need.

scx110a said:
Tried, and failed... Since my kindle fire stopped at the sliver kindle fire screen and it reboots again and again, I can't even get the access to adb...
I think maybe I need to request a replacement from Amazon...Or someone could give me a usable System image and fastboot.exe.....
EDIT: Weird....After 10 minute's rebooting, my kindle suddenly works....Everything seems to be fine....
Click to expand...
Click to collapse
Not weird at all. This will occasionally happen until the corrected changes make it into the Dalvik. Tense stuff I know, but jcase finding the device vulnerable to the master key #2 is a blessing in disguise. Hard for simple errors to really mess things up. Not saying go at it, but simple changes of most things (do not mess with bin, xbin or any of the basic systemui framewor-res) will not be a total loss.
Now I just need to take the time to decompile tiwee's Play Store mod & see if I can't find a typo or something amiss.

GSLEON3 said:
@TOM XIE If you used that build.prop provided in that thread, then you replaces yours with one meant for the 7" HDX. You need to download the update.bin from Amazon & extract it (it is just an archive zip). You will then have wht you need.
Click to expand...
Click to collapse
I have downloaded update.bin from Amazon. The most difficult part is that my kindle cannot be recognized as anything.

TOM XIE said:
I have downloaded update.bin from Amazon. The most difficult part is that my kindle cannot be recognized as anything.
Click to expand...
Click to collapse
Are you running Windows or Linux?
Also, do you have the Android SDK & the JDK installed.
Both of these are important steps. Also, was the device rooted & if you plug it into the USB port in a windows machine, do you see anything happen in Device Manager? It should fail to install the device (MTP) but if you have everything installed, you should try running it in a terminal directly in the sdk tools directory.
Also, have you updated your environmental or pam.environmental file as well in your bash file?
EDIT: I just went out on a limb again & I pushed the HDX7 build.prop to my device & rebooted. I was able to cp the repaired build.prop, so tell me everything you have done (what you tried & changed, modded or installed into system or root on the HDX) & check the above tips.

GSLEON3 said:
Not weird at all. This will occasionally happen until the corrected changes make it into the Dalvik. Tense stuff I know, but jcase finding the device vulnerable to the master key #2 is a blessing in disguise. Hard for simple errors to really mess things up. Not saying go at it, but simple changes of most things (do not mess with bin, xbin or any of the basic systemui framewor-res) will not be a total loss.
Now I just need to take the time to decompile tiwee's Play Store mod & see if I can't find a typo or something amiss.
Click to expand...
Click to collapse
Hope you good luck.... That's really a complex thing since Amazon did so many changes to the DownloadProvider....

May ask you a question? plz
GSLEON3 said:
Are you running Windows or Linux?
Also, do you have the Android SDK & the JDK installed.
Both of these are important steps. Also, was the device rooted & if you plug it into the USB port in a windows machine, do you see anything happen in Device Manager? It should fail to install the device (MTP) but if you have everything installed, you should try running it in a terminal directly in the sdk tools directory.
Also, have you updated your environmental or pam.environmental file as well in your bash file?
EDIT: I just went out on a limb again & I pushed the HDX7 build.prop to my device & rebooted. I was able to cp the repaired build.prop, so tell me everything you have done (what you tried & changed, modded or installed into system or root on the HDX) & check the above tips.
Click to expand...
Click to collapse
I have still brick my device my device is hdx7. My latop os window7.
Connect my kindle to laptop's usb port. My laptop is.shown qhsusb_bulk so i follow your step but
Not booting my device. Now i know my device 's system erase. Second step i connect nomal cable but shown unknown
MTP device. Plz help me. Do you know adb work? On my win7 laptop?
Or another method? Plz please help.me sorry for my english

cjdfyd2 said:
I have still brick my device my device is hdx7. My latop os window7.
Connect my kindle to laptop's usb port. My laptop is.shown qhsusb_bulk so i follow your step but
Not booting my device. Now i know my device 's system erase. Second step i connect nomal cable but shown unknown
MTP device. Plz help me. Do you know adb work? On my win7 laptop?
Or another method? Plz please help.me sorry for my english
Click to expand...
Click to collapse
Need to leave device alone for an hour or more while unpluged, no PC, no power.
After that hour, then press & hold the power button for 3 minutes, or until device starts. If it does not start into bootloap, then release the power button & let sit for a few minutes. Try to turn it on again.
Also, what did you do to the device? What did you mod, or change or add that caused the issue?
As for Windows, I have found that for adb to work on the HDX, you need to have the SDK installed & that sometimes it will not recognize the device from anywhere but the sdk folder.
Also, I had some issues getting some of the commands to work occasionally in Windows, which is why I choose to do these things in Linux.

GSLEON3 said:
@Poesini
Once you have it working, to the point of booting into the OS, grab the update.bin from Amazon (update-kindle-14.3.1.0_user_310079820.bin) here:
(still can't post links)
Once downloaded, grab a root level file explorer. I use the paid Root Explorer because it has built in root acess, a text editor & a ro/rw toggle button, but others should surely work. Make sure that the /System partition/directory is mounted as RW, then open the file build.prop & edit all the entries that say "310079820" to be"310079819".
You will find them in the build.prop as follows:
ro.build.version.incremental=14.3.1.0_user_310079820
ro.build.version.number=310079820
ro.build.description=apollo-user 4.2.2 JDQ39 14.3.1.0_user_310079820 release-keys
ro.build.fingerprint=Amazon/apollo/apollo:4.2.2/JDQ39/14.3.1.0_user_310079820:user/release-keys
Do not add the parenthesis, just change the last three number to 819 & then be sure to save the file. Open it again to ensure the edits were made, so you are certain that the device directory was indeed RW.
Again, I suggest copying the file to your PC as a backup, though you will have a copy in the downloaded update.bin (which is just a zip archive). I also suggest using a root explorer with a built in text editor, like Root Explorer.
Once this is done & you are certain the build.prop has been edited, copy the update.bin to the storage (sdcard) root & reboot the device.
Once the device has reboot, go into settings, device, system updates & select the install update button. Follow the directions & the device will reboot again & install the firmware. Any mods made to the System directory will be gone & everything should work again.
Click to expand...
Click to collapse
Tried using this method after the installation of gapps failed due to system directory being full (1gb)... I already gave up on this device until I saw this... Many Thanks! :highfive:

Thanks your answer and happy new year, i was wonder if could you help me?
GSLEON3 said:
Need to leave device alone for an hour or more while unpluged, no PC, no power.
After that hour, then press & hold the power button for 3 minutes, or until device starts. If it does not start into bootloap, then release the power button & let sit for a few minutes. Try to turn it on again.
Also, what did you do to the device? What did you mod, or change or add that caused the issue?
As for Windows, I have found that for adb to work on the HDX, you need to have the SDK installed & that sometimes it will not recognize the device from anywhere but the sdk folder.
Also, I had some issues getting some of the commands to work occasionally in Windows, which is why I choose to do these things in Linux.
Click to expand...
Click to collapse
my device is kindle 7", i had followed step Cpasjuste's http://forum.xda-developers.com/showthread.php?t=2577826 and i delete these files
"/system/app/amazonmp3_4010410.apk" -> amazon mp3 ..
"/system/app/Email_310006810.apk" -> email app, replaced by gmail which is currently broken !
"/system/app/Photos_7016610.apk" -> photos app
"/system/app/OfficeSuiteViewer.apk" -> office ..
"/system/app/S2Service.apk" -> something to do with cellular i think
"/system/app/Launcher-release-signed_81224610.apk" -> amazon launcher
"/system/app/AmazonWebViewLib_1109110.apk" -> slik browser
"/system/app/com.amazon.cloud9-platform_38038110.apk" -> amazon cloud/sync
and flashing he's gapps file. and then my device is bricked. it's shown grey kindle fire logo only, so i reboot many times but still shown kindle fire logo only.
So i install ubuntu my laptop, and follow your step jcase's file download on my computer.
but i don't know how next step? how open "su" file? by sdk? work on window os? or linux os? sorry for many question plz help me..and happy new year

Hello,
My kindle is bootlooping on the grey kindle and orange fire logo. This is a HDX 7.
I rooted, went a bit crazy with uninstalling kindle bloatware, screen went black, thought factory reset would do the trick, end up in bootloop.
My computer recognizes the kindle so what should I do?

[Q] Getting USB-enabled ADB working

Hey all,
I've been working at getting USB-enabled adb working for my Nook Simple Touch. I've got adb working on my Linux laptop, and I've got an adbwireless app working on my nook. (It was part of the app bundle when I rooted and flashed the Nook with extras.)
So I can connect via adbwireless, but not via USB. My main desire to get USB working is in the eventuality that my nook gets locked. (Getting jostled in my bag can activate the PIN and cause a lockout if it happens often enough.) But I'm also taking this as an exercise in learning more about ADB.
To be clear, I've got adb installed already on the laptop, I just want to be able to detect the nook when it's plugged in.

jasonmehmel said:
So I can connect via adbwireless, but not via USB.
Click to expand...
Click to collapse
As I understand it, you have a choice with the Nook Simple Touch, you can have ADB over wireless, or USB, but not both. It is based on a setting in init.rc (which is contained inside uRamdisk)
Code:
setprop service.adb.tcp.port 5555
If this line is present, it sets the TCP port for ADB, and your NST will connect via wireless. If you comment it out (place a "#" at the beginning of the line), your NST will connect via USB.
I see that Renate gave full instructions for you on this in another thread, you should check there.
MildBill

MildBill said:
I see that Renate gave full instructions for you on this in another thread, you should check there.
MildBill
Click to expand...
Click to collapse
Yeah, I posted this before I saw their reply. That said... I'm having a hard time following Renate's instructions clearly; I feel like I'm too new at this to fully understand each point though I am researching the questions as I have them.
So, uRamdisk and init.rc... if I've got the ES File Explorer on the nook, would I be able to track down that file and open it that way? I'm assuming uRamdisk is part of what I've used to root the nook?
(I followed instructions online to root the nook and partially understood them, but I'm still fuzzy or non-expert on a lot of what I'm using.)

jasonmehmel said:
I'm assuming uRamdisk is part of what I've used to root the nook?
Click to expand...
Click to collapse
uRamdisk is used to boot the nook, it is actually an archive of many files, and is the actual filesystem used in booting the Nook. There were longer, more complete instructions I have seen, and followed myself, in another of Renates posts. it can be found here:
http://forum.xda-developers.com/showthread.php?t=2122046
You would not need to do anything with with the default.prop file, as NookManager will already have done what is needed. But, you can either use noogie.img as suggested, or use ADB pull via your wireless connection to get the current uRamdisk, then follow the instructions to extract init.rc from it, modify the one line in the file, then insert the new copy back into uRamdisk and use ADB push to replace the copy of uRamdisk on your device.
NOTE that once you do this, and reboot your NST that ADB over WiFi will no longer work, you will be using ADB via USB.
There is a utility that you will need to download from Renates page (Click on her signature block, it will take you there) to extract and reinsert the init.rc from uRamdisk. Otherwise, the instructions in that post should be all you need to do the job. Read them over, be sure you have everything ready to go and that you have a basic understandng of what you are doing before you actually try it.
One more suggestion, you may want to keep 2 copies of uRamdisk on your computer, one set up for ADB WiFi (a copy of the file you will be starting with!) and one for ADB by USB (The one you will create after you modify init.rc). That way all you will need to do in the future to change over is an ADB push of the appropriate file to your device, then reboot it.
Hope this helps,
MildBill

If you have ADB working over wifi and all you want is to enable it to work over USB on Linux you can probably forget about uRamdisk. You're fine, you don't need to change anything on Nook's side, all you need are a few changes on Linux. Specifically:
1. Enable permissions for Nook's device in udev. In order to do that, create a file (or edit an existing one) /etc/udev/rules.d/51-android.rules, and add a line:
Code:
SUBSYSTEM=="usb", ATTRS{idVendor}=="2080", ATTRS{idProduct}=="0003", MODE="0666", OWNER="<your_username>"
2080:0003 is Nook's USB ID, and <your_username> is (surprise!) your username on Linux. Reboot to force the changes to takes effect.
2. Create a file (or edit an existing one) ~/.android/adb_usb.ini and add a line with Nook's vendor ID:
Code:
0x2080
3. Connect the USB cable to your Nook. At that point, Linux will probably detect your Nook as two USB drives. Eject those drives.
4. Start the ADB server:
Code:
adb start-server
5. Check that ADB sees your Nook:
Code:
adb devices
If you get back something like "<big_number> device", you're good to go, you can run ADB commands. Otherwise kill the server and start it again:
Code:
adb kill-server
adb start-server

lcd047 said:
2080:0003 is Nook's USB ID
Click to expand...
Click to collapse
... and the new white Nook is 2080:0007
lcd047 said:
~/.android/adb_usb.ini and add a line with Nook's vendor ID:
Click to expand...
Click to collapse
The latest ADB version has B&N in the list of known manufacturers.
This will not be necessary if your copy is new enough.

Sorry, there's one more thing needed before ADB can work over USB: enable USB debugging. Get NookColorTools, run it, and go to "All Settings" > "Development" and check "USB debugging". After that the ADB server should be able to see your Nook.

lcd047 said:
Sorry, there's one more thing needed before ADB can work over USB: enable USB debugging. Get NookColorTools, run it, and go to "All Settings" > "Development" and check "USB debugging". After that the ADB server should be able to see your Nook.
Click to expand...
Click to collapse
Odd, I used Renate's instructions from http://forum.xda-developers.com/showthread.php?t=2122046 and ADB works fine either over USB or WiFi (either/or, both will not work at one time, depending on whether or not you define the port with
Code:
setprop service.adb.tcp.port 5555
).
I never had to do anything other than that to get ADB root access, but then, I don't want all the junk that the leading root managers want to add to my Nook.

MildBill said:
Odd, I used Renate's instructions from http://forum.xda-developers.com/showthread.php?t=2122046 and ADB works fine either over USB or WiFi (either/or, both will not work at one time, depending on whether or not you define the port with
Code:
setprop service.adb.tcp.port 5555
).
I never had to do anything other than that to get ADB root access, but then, I don't want all the junk that the leading root managers want to add to my Nook.
Click to expand...
Click to collapse
I just flashed my Nook to factory and went through all this from scratch, and the setprop above was not enough. Whether USB debugging actually does anything on Nook is still subject to debate among the supposedly knowledgeable people, but it was needed for me to enable the ADB server to see my Nook over USB. It was also required on all other (newer) Android devices I used, so it makes at least some sense. Still, It might have to do with the version of ADB.
As for not being able to use both TCP and USB at the same time, that's a limitation of the server (it can't talk to more than one device at a time), which is why you have to kill it before switching. But you don't need to do anything on Nook to switch from one to the other (at least that's how it works for me).

lcd047 said:
I just flashed my Nook to factory and went through all this from scratch, and the setprop above was not enough.
Click to expand...
Click to collapse
No, by itself it is not. But, if you read the post I linked, you make changes to both init.rc and default.prop, both contained in the uRamdisk filesystem archive, and that is all it takes to achieve root shell access via ADB on the Nook ST v1.2.1, or, at least, that is all it took for me to achieve it.
Keep in mind that the setprop as listed forces WiFi access to ADB, for USB access to it, you must leave that line commented out, again as shown in the linked post.
MildBill

How to Root and set up a new Nook Glowlight 3

I got tired of having to jump between a bunch of threads when setting up my Glowlight 3. So I'm consolidating directions into one post in the hopes that it'll save others time and trouble. Credit for instructions should go to the people who actually wrote them: arnchav of mobileread; RyogoNA, Silent eInk, cazar and Renate NST here on xda; and everyone who figured out the root exploit, sideloading, the devs behind Relaunch, RelaunchX and F-Droid. Material lifted from their original posts (linked at the bottom).
Now, this is going to walk you through doing a few things:
A) Setting up a progam called ADB on your computer so that it can talk to your NG3
B) Adding a "Launcher" app to your nook so that you can access other apps you sideload later
C) Root theNook so that you can do more stuff with the settings, including the ability to...
D) Fix a bug that, after installing a launcher, causes the NG3 to get stuck on the loading screen after rebooting
Before you start, you need to set up ADB on your computer. Follow the instructions linked here. The rest of this post will assume you're using Windows, but won't be hugely different from other OSs.
Here we go:
To set up ADB on your nook:
1. On your Nook, go to Settings>About. You should see the serial number, app version, etc. At the top of that page, there is a nook icon. Tap that icon rapidly until the developer menu opens.
2. Tap "Android Development Settings" and check the box for "USB debugging".
3. At the Developer options screen you are on (where you checked the box), hit the back arrow at the top-left of the screen to go back. But do not exit the developer menu.
4. On your computer, open a command prompt and navigate to the folder where you put adb (in my case I typed in "cd adb/platform-tools")
5. Plug the USB in to the nook. When the nook prompts you to turn on USB mode, do so. At the adb command prompt, type adb devices. ADB should recognize the nook, but say that it is unauthorized.
6. From windows, eject the nook to disconnect nook's file sharing. Once the nook's USB file sharing screen goes away, you should be able to see the developer menu again. Tap "Allow Debugging" one time! There will be no confirmation, just do it one time.
6. Unplug the USB, plug it back in, turn on USB mode when prompted. Back in the command prompt, type adb devices again. This time it should see the device and simply say "device" where it used to say "unauthorized". Congratulations! You can now install a launcher.
To install a launcher, like RelaunchX
1. Download your launcher apk of choice. If you don't know what to pick, try RelaunchX, and download the latest version from plusz's thread here: https://www.mobileread.com/forums/showthread.php?t=284418 (n.b. To make things easy, ignore his suggestion to get it through F-Droid as you'll need a new launcher to use F-Droid in the first place. Just download the apk).
2. In Command prompt, type adb install <filelocation>, where filelocation is the complete address of the apk. If you have file explorer open, you can just type adb install then a space, then drag the file in to the terminal and it will copy the location for you. (Make sure again that there is a space between "install" and the path or it won't work).
3. ADB should do it's thing and you will get a "success" message in Terminal.
4. Eject the nook from the PC. Shortly after the connection is cut, a window should open on the nook allowing you to select either the nook launcher or your new launcher. If you use RelaunchX, you may get a warning that it wasn't built with this device in mind. You can ignore it, it works great on this device.
This is all great, except there's a bug in how B&N set up the device that only shows up if you install a new launcher. If you reboot the device, you'll be stuck on the boot animation until you do weird things like hold down the power button for a long time to pull up the reboot/power off options (only seems to sometimes work). To fix that, we actually have to disable, remove, or replace the boot animation file itself.
To root:
1. Download the modified Glowlight Plus script attached here ("rootGL3.zip" - almost identical to cazar's rooGLP-3 script package, but with one line changing the model number from 510 to 520)
1. Enable USB debugging in Developer options
2. Connect USB cable and make sure your nook is showing up in 'adb devices'
3. Extract rootGLP.zip and run rootnook.cmd (or rootnook.sh on linux)
To fix (read: disable) the buggy boot animation:
1. Connect your nook to the computer again
2. (windows) open a command prompt and and navigate to the folder that adb is in.
3. Enter the following commands, in order:
Code:
adb shell
su
mount -o remount, rw /system
mv /system/bin/bootanimation /system/bin/bootanimation.bak
reboot
OPTIONAL: To restore a working boot animation (steps above will replace broken boot animation with a black screen that goes away after a few seconds)
1. Download the attached zip
2. If it's not still connected, connect the Nook to the computer again and tap the button on the nook to turn on USB mode when prompted,
3. On your computer, open up the Nook in Explorer(/Finder/your file manager of choice). Open up the NOOK Folder if you see one.
4. Copy the file inside the zip (bootanimation) to that folder on the Nook.
5. Eject the nook (as in, in windows, click the option to safely remove it as a device) but keep it physically connected
6. Open a command prompt(/terminal/whatever you use for adb) and navigate to the folder that adb is in.
7. Enter the following commands:
Code:
adb shell
su
mount -o rw,remount -t ext4 /dev/block/mmcblk0p5 /system
cp /storage/spsd/NOOK/bootanimation /system/bin/bootanimation
cd /system/bin
chmod 755 bootanimation
reboot
You now have a rooted Nook Glowlight 3 that'll boot into a launcher of your choice! You can now sideload apks of your choice using adb the same way you installed RelaunchX.
Have fun!
Sources for these instructions:
https://www.mobileread.com/forums/showpost.php?p=3632665&postcount=118 (how to sideload onto nook 3)
https://forum.xda-developers.com/showpost.php?p=75717722&postcount=113 (same as above, diff user)
https://www.mobileread.com/forums/showthread.php?p=3632665#post3632665 (to get RelaunchX)
https://forum.xda-developers.com/showpost.php?p=64191791 (for nook GLP rooting script)
https://forum.xda-developers.com/showpost.php?p=76042888&postcount=127 (to fix boot animation loop)
HELP! I DID THIS A LONG TIME AGO AND NOW MY NOOK GLOWLIGHT 3 IS STUCK ON THE LOADING SCREEN!
Don't worry, this is fixable. What's happened is that Barnes and Noble pushed out a system update that undid almost everything except that part that breaks the boot animation thing (specifically it overwrites the directory with everything that gives you root access and a working boot animation, but left your custom launcher in place).
All you have to do is re-do most of the steps above. Start from the "to root" step - even if the device is stuck on a boot animation, you should still be able to use adb. After redoing the steps, your GL3 should work normally again.
Unfortunately it looks like this is going to happen every time B&N pushes a system update, but that's not that often.

If someone knows a step-by-step way to replace the stock bootanimation with the 4.6 bootanimation file (zipped up and attached here, thanks to RyogoNA), let me know and I'll update the OP. I tried used adb shell to copy it to /system/bin/bootanimation, but I still just get a black screen on startup in its place.

jptiger said:
I still just get a black screen...
Click to expand...
Click to collapse
Mmm, did the copy of bootanimation work?
Did you:
Code:
/system/bin # chmod 755 bootanimation

Tried that, but I got an error about a Read-only file system, even after using su. What's the basic thing I'm missing?

jptiger said:
Tried that, but I got an error about a Read-only file system, even after using su. What's the basic thing I'm missing?
Click to expand...
Click to collapse
Got a private message pointing me to the command I was missing, apparently from a how-to page in Russian. For anyone else trying to do this, try:
Code:
mount -o rw,remount -t ext4 /dev/block/mmcblk0p5 /system
cd /system/bin
chmod 755 bootanimation

Can't get adb devices to give autorhized access to ng3 w 4.9.2.24 os
First off thank you for doing this work, and I am excited to root my ng3!
In trying to follow your directions on rooting, I am hitting a snag. The os is not operating in the anticipated manner. When I do the usb unplug and replug and hit the usb debugging checkbox I can not get authorization.
Please help!
Thanks in advance!

Trouble with root
Hi,
Thanks for putting this all together. However, I'm having trouble with the root step.
You'll have to put the link together because as a new poster I can't post links.
Any help would be appreciated!
imgur . com
/a
/ckm0jRq

xelcho said:
First off thank you for doing this work, and I am excited to root my ng3!
In trying to follow your directions on rooting, I am hitting a snag. The os is not operating in the anticipated manner. When I do the usb unplug and replug and hit the usb debugging checkbox I can not get authorization.
Please help!
Thanks in advance!
Click to expand...
Click to collapse
Hmm. Did you get authorization after following the directions under "To Set up ADB on your Nook"?
L3R0k2b2 said:
Hi,
Thanks for putting this all together. However, I'm having trouble with the root step.
You'll have to put the link together because as a new poster I can't post links.
Any help would be appreciated!
imgur . com
/a
/ckm0jRq
Click to expand...
Click to collapse
Ooh, that's exotic. I've never seen that before. Just going off the error text, you might need to find a newer version of adb somewhere online. Try that or try a different computer?

Adb is super stable for many years now, although it can fail to connect to your device properly for many reasons.
Can you reach developer menu navigating with nooks keys? I sometimes enable /disable /enable usb Debug, followed or preceded by revoking all PC's permissions. These are all standard options in android phones s system. menus. Rebooting nook may help too, and numerous times I've seen bad cables get in my way. Tip, just because a cable works with one device is not a guarantee it's working everywhere.

RE: STEP 6. "From windows, eject the nook to disconnect nook's file sharing."
Note:
1. The location of the eject menu is where you typically see "Safely remove hardware and eject media" in the windows taskbar.
2. After attempting to eject your Nook GLP, you may get a window that pops up that says "Windows can't stop [your device]" because a process is using it -- and you may not be able to track down which process is using it (for me, closing all windows and apps didn't help). If this is the case, hit "WINDOWS+X >> Shut down or Sign Out >> Sign out" -- then log back in. This *should* stop all processes and allow you to proceed to the next step (it did for me).
*My Nook GLP recently updated and I lost root. This also caused the startup animation to continue non-stop (but holding the power button and then selecting cancel from the options allowed me to select which launcher I wanted to use).
** Additionally, I had one other issue. My (windows) laptop wouldn't recognize my nook at all. Turns out it was the USB cable. So if you have that issue, try using a different USB cable -- preferably the one that came with your nook.

Missing epubs
So I followed the instructions, everything comes up great. I can sideload apps, I have a new launcher etc. But if I copy a file (epub or otherwise) into the NOOK folder on my PC and then browse to the NOOK folder using the file manager on the Nook reader, its empty. At first I thought it was an issue with the file manager, so I installed another one. Same thing.
When I load epubs into the NOOK folder and open the B&N launcher, it sees the books and adds them to my library. But for whatever reason I can not find where the epubs are using a file manager. I even tried using grep to search for the file I copied in adb shell but it doesn't come up with anything. Anyone know whats going on and how to fix it?

Never mind its under /storage/spsd/

mount: Operation not permitted
I get this error after typing in the mount -o ... command.
Any help apprecidated!

root file missing
Hey, @jptiger In the setup instructions the rootgl3.zip file is missing a link now... Does anyone have an active link to this file, or another working root process? I couldnt find one by searching online..

Misssing files
I rebooted my nook recently and it comes back up but when I got /storage/spsd/ its empty. When I attach my nook to my pc, I can see all my books. So I did the following:
Code:
adb shell
su
busybox find / -name "*.epub"
The only files that it shows are the sample epubs that come with the Nook. I am kind of stumped as to how the files show up when I browse the nook as a usb drive. But will not show up when browsing for them via the nook itself or adb. Any thoughts?

Heretic09 said:
I rebooted my nook recently and it comes back up but when I got /storage/spsd/ its empty. When I attach my nook to my pc, I can see all my books. So I did the following:
Code:
adb shell
su
busybox find / -name "*.epub"
The only files that it shows are the sample epubs that come with the Nook. I am kind of stumped as to how the files show up when I browse the nook as a usb drive. But will not show up when browsing for them via the nook itself or adb. Any thoughts?
Click to expand...
Click to collapse
It looks like the flash memory on the Nook maybe going bad. There was a bunch of .chk files in the hidden LOST folder. Reformatting it and copying the books back to the nook seems to have fixed the problem for now. I may have to invest in the Kobo Clara HD in the future.

andjosgra said:
Hey, @jptiger In the setup instructions the rootgl3.zip file is missing a link now... Does anyone have an active link to this file, or another working root process? I couldnt find one by searching online..
Click to expand...
Click to collapse
That's weird. I don't know why they took down the original attachment. I can't find it, but I've gotten the on from the NGP+ and modified it the way they did with the originals. It's attached to this post, give it a shot.
EDIT: I uploaded the version attached here to the OP, but with the original name. The two zips have the same contents.

Heretic09 said:
So I followed the instructions, everything comes up great. I can sideload apps, I have a new launcher etc. But if I copy a file (epub or otherwise) into the NOOK folder on my PC and then browse to the NOOK folder using the file manager on the Nook reader, its empty. At first I thought it was an issue with the file manager, so I installed another one. Same thing.
When I load epubs into the NOOK folder and open the B&N launcher, it sees the books and adds them to my library. But for whatever reason I can not find where the epubs are using a file manager. I even tried using grep to search for the file I copied in adb shell but it doesn't come up with anything. Anyone know whats going on and how to fix it?
Click to expand...
Click to collapse
adb can't access NOOK storage when it's still connected to PC. Eject the device under BNRV520 (should say "NOOK: (F" or similar), but do not disconnect. Then you can find files in both adb and later NOOK's file manager when you disconnect. (should be under /storage/spsd/)
Guide is great though. Thank you all so much! Fast and easy! (unlike making a B&N account)
btw, I had to run "adb shell su" instead of 'adb shell' -> 'su' to get su priviledge, so maybe try that.

what is the adb command to manually launch relaunchx? the launcher option stopped working, and i can't get it to run at all.

Happy to report that the excellent instructions work great on the new 7.8" Glowlight Plus that got released yesterday. Change the model number to BNRV700 in the rootnook.cmd file and you're good to go!