Related
These are my notes and guide for rooting the Kindle with 6.2.1 firmware. If I left something out, or something is not working, please leave a comment and I'll try to update.
Credit goes to JCase for the root. Please consider making a donation to him here:
https://market.android.com/details?id=net.andirc.jcasedonate
Original procedure is here:
http://www.androidpolice.com/2011/1...on-kindle-regardless-of-its-software-version/
ADB INSTALL AND TEST - Method 1 (skip to the ROOT INSTALL section if you already have a working ADB)
NOTE: ADB = Android Debug Bridge. It is a command line interface to the android device. A working ADB is required before you can root your Kindle. ADB is installed on a PC and accesses the Kindle via USB cable.
Install Java SE Development Kit 7 on PC
The Android SDK Manager requires Java SDK
http://www.oracle.com/technetwork/java/javase/downloads/jdk-7u1-download-513651.html
Install Android SDK Manager on PC
The Android SDK has the drivers and ADB needed to perform the root procedure
http://developer.android.com/sdk/index.html
Uncheck Android 4.0
Check 2.33
Ensure Google USB Driver is checked
Install to c:\android to make typing easier later on
NOTE: The install can take a long time!
Manually update files so drivers will properly install
Open c:\users\your account name\.android\adb_usb.ini (or c:\documents and settings... if you have XP) and add the following
Code:
0x1949
Open c:\android\extras\google\usb_driver\android_winusb.inf and make additions as shown:
Code:
[Google.NTx86]
;Kindle Fire
%SingleAdbInterface% = USB_Install, USB\VID_1949&PID_0006
%CompositeAdbInterface% = USB_Install, USB\VID_1949&PID_0006&MI_01
....
[Google.NTamd64]
;Kindle Fire
%SingleAdbInterface% = USB_Install, USB\VID_1949&PID_0006
%CompositeAdbInterface% = USB_Install, USB\VID_1949&PID_0006&MI_01
Install drivers
Find the Kindle device in device manager and update drivers. Point to the location with android_winusb .inf
Verify ADB works
Open a command prompt
CD to c:\android\platform-tools
Code:
adb kill-server
adb devices
If it's working, ADB will return a large number, like this:
Code:
312342134231342 device
ADB INSTALL AND TEST - Method 2
NOTE: I have not tried this, but Vashypooh's app can apparently handle the driver install, and run ADB without installing the above software. If all of this works, then his app would be the best way IMO.
NOTE 2: I've seen a lot of comments suggesting the driver install in Vashypooh's app doesn't work at this point.
http://forum.xda-developers.com/showthread.php?t=1399889
ROOT INSTALL - Method 1
Install JCase's kindleroot_androidpolice.apk
JCase's app gives ADB root access. Once this is done, you still need to install the superuser app
Download kindleroot_androidpolice.apk to PC
http://www.multiupload.com/VNZ6Y41EQF
Ensure the Kindle is connected via USB, and copy file to Kindle sdcard
Using ES File Explorer on Kindle, navigate to the kindleroot_androidpolice.apk and launch
Follow prompts and click root
Install superuser app
Download superuser-2 to PC
http://www.multiupload.com/M2CX14W7Y0
Unzip to c:\download\sufiles
Use ADB to install SU app
Code:
adb root
adb remount
adb push c:\download\sufiles\su /system/xbin/su
adb shell chown 0.0 /system/xbin/su
adb shell chmod 06755 /system/xbin/su
adb install c:\download\sufiles\Superuser.apk
adb reboot
ROOT INSTALL - Method 2
NOTE: I have not tried this, but Vashypooh's app can apparently handle the root process.
BurritoRoot (Temporary)
Install Permanent Root with Superuser
http://forum.xda-developers.com/showthread.php?t=1399889
A+ instructions, wish I could write my own that good lol.
jcase said:
A+ instructions, wish I could write my own that good lol.
Click to expand...
Click to collapse
Thanks to you for the root. I hope the guide will help those trying to root!
Thanks for the clear and easy steps.
Great guide Ectoplasmic!
One thing I would add though, in step 5 "Verify ADB Works", before you use the "adb devices" command, you need to type "adb kill-server". If you don't type in "adb kill-server" first, the device won't show up when you use the "adb devices" command. Or at least it didn't for me.
Otherwise, everything worked FLAWLESSLY. I verified I was rooted using Root Checker. Thank you!
zopzop25 said:
Great guide Ectoplasmic!
One thing I would add though, in step 5 "Verify ADB Works", before you use the "adb devices" command, you need to type "adb kill-server". If you don't type in "adb kill-server" first, the device won't show up when you use the "adb devices" command. Or at least it didn't for me.
Otherwise, everything worked FLAWLESSLY. I verified I was rooted using Root Checker. Thank you!
Click to expand...
Click to collapse
Thanks, I added this to the guide.
Hi I use JCase method to root my 6.2.1 KF, then I need to unroot it so my kids can still enjoy the prime video, but I cannot. I try rootkeeper but failed. I also try the "kindleroot_androidpolice.apk" and click the unroot button, but it still cannot unroot. Pls help!
Get help in irc from jcase and vashypool theyll probably be able to help u
tkcctkcc said:
Hi I use JCase method to root my 6.2.1 KF, then I need to unroot it so my kids can still enjoy the prime video, but I cannot. I try rootkeeper but failed. I also try the "kindleroot_androidpolice.apk" and click the unroot button, but it still cannot unroot. Pls help!
Click to expand...
Click to collapse
Unroot in my app (BurritoRoot) does not remove su, it just turns off adb root (which is what my app turns on) sorry for the confusion.
Will add in the future when I release burritomod
Here's the equivalent instructions for Mac
I am pretty new myself, but I'm happy to share what I've come up with so far. I am on a Mac OS X 10.6.8
Download the Android SDK for Mac (dl.google.com/android/android-sdk_r16-macosx.zip), the easiest place to put it is at the top of your user directory, from the browser download window chose your username from places on the left side, then name the zip "Android"
Next from Finder, navigate to the place where you downloaded the SDK, and double-click on it which should unzip it and create a folder of the same name e.g "Android". Open that and inside it will be a folder "tools", and inside that there will be a file "android". Double-click that to run it and the "Android SDK Manager" program window will pop up, you will also see a Terminal window in the background, don't worry about that. Uncheck all the boxes, then check "Android SDK Platform-tools" which should be the third from the top, and click install. This gets you the actual "dab" program.
Once adb is setup, to get it to recognize your kindle fire on your mac, you may need to make an entry in a config file if you haven't already.
Start Terminal Applications > Utilities > Terminal or if you are used to using spotlight, simply type in "Terminal". (here's an intro to using Terminal guides.macrumors.com/Terminal) and navigate to the directory where you have adb, e.g. if you placed it at the top of your user directory that would be
Code:
cd Android
or if you left it in the default downloads directory it would be
Code:
cd Downloads/android-sdk-macosx/
then enter the following commands
Code:
mkdir ~/.android
You may get the following error
Code:
mkdir: /Users/<username>/.android: File exists
If so, that is fine, continue to the next step
Code:
touch ~/.android/adb_usb.ini
open -e ~/.android/adb_usb.ini
TextEdit will open with that file open, you should have an entry in it on a single line that says
Code:
0x1949
if not, copy that in, then save and close it, then
Code:
./adb kill-server
Connect your kindle to the mac if it isn't already, then
Code:
./adb devices
You should see a message like
Code:
List of devices attached
2ED6000600000001 device
On your kindle, make sure you have a file navigation app, the example above ES FileExplorer is excellent and is the one I use from Amazon app store
Download Burrito Root from Android Police ( androidpolice.com/2011/12/23/exclusive-how-to-easily-root-the-amazon-kindle-regardless-of-its-software-version/)
Also download the Superuser.zip from the same page (multiupload.com/ONH28CB1GU) and unzip, then make sure you move the contents "su" and "Superuser.apk" into the same directory as adb
Through Finder copy the "kindleroot_androidpolice.apk" file you downloaded earlier to your kindle, some place like "download" so you can find it easily later
Now on the Kindle, tap disconnect on your KIndle so you can get back to the apps screen, launch the file explorer you installed earlier, navigate to folder you copied it to, e.g. "download" then install the "kindleroot_androidpolice.apk", open it, and go through the steps to launch click "Root"
Back on the Mac, in the terminal window where you had adb going, enter the commands
Code:
./adb root
./adb remount
./adb push su /system/xbin/su
./adb shell chown 0.0 /system/xbin/su
./adb shell chmod 06755 /system/xbin/su
./adb install Superuser.apk
./adb reboot
You should be rooted now, then you can follow the other instructions out there for getting Android market, etc working
TIP
here's a tip if you don't want to have to type in the period and slash ahead of adb every time. from your terminal window enter the
Code:
cd ~
touch .profile
open -e .profile
That will open text editor, and paste in the following line,
Code:
PATH=${PATH}:/Users/<username>/<sdk-directory>/platform-tools
replacing both our user name and the path to where you have sdk e.g. in my case
Code:
PATH=${PATH}:/Users/kbiz/Android/platform-tools
Then close the terminal window and reopen a new one and you should be good to go, now you'll only need to type in "adb".
Let me know if I missed something, trying to give back since this forum has been super helpful.
---------- Post added at 01:04 AM ---------- Previous post was at 12:58 AM ----------
tkcctkcc said:
Hi I use JCase method to root my 6.2.1 KF, then I need to unroot it so my kids can still enjoy the prime video, but I cannot. I try rootkeeper but failed. I also try the "kindleroot_androidpolice.apk" and click the unroot button, but it still cannot unroot. Pls help!
Click to expand...
Click to collapse
OTA Rootkeeper should work but since its not, try this (courtesy rootkindlefire.com/kindle-fire-unroot/how-to-unroot-kindle-fire/)
Code:
adb shell
su
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
rm /system/app/Superuser.apk
rm /system/xbin/su
reboot
after your Kindle restarts you won't have root and Amazon Video should work just fine.
Hello,
I have successfully rooted my device with the above instructions. While installing the Android market I was abusing of my root privileges and I've successfully "burned" my device. That is, the Kindle won't start up anymore (it stays forever in the initial phase showing the kindleFire logo).
I don't know where else to turn for help so I'm writing about this here. If anyone has hints of how I could recover my kindle from the void, please let me know
Cheers
http://forum.xda-developers.com/showthread.php?t=1356257
Yesssssssssss
Yesssssssssssssssssss. So nice to have root again. My Titanium Backup and SUFBS works again
I had ADB and SDK working when I had my Glacier, but since I have gotten my SGS2, and my Kindle, Android SDK Manager will not open... It just opens a command prompt, and then closes.. I have reinstalled both the SDK Manager and the Java Kit... Any ideas?
EDIT:
I must have messed with something in my system settings somewhere to corrupt a bunch of stuff... I did a system restore to the 18th of December, reinstalled, and everything works perfect now... Oh well! Haha
Hey, I used a combo of the link JCase gave me when I had questions, this guide, and the links off the rootzwiki guide and managed to get it first try. It was actually easier than I thought it was going to be. I've never rooted anything before, I didn't even have ADB or the SDK until tonight. The process (while using both guides and video tut) went smoothly without a hitch. I just finished installing the Android Market but have to wait til morning to access it, as I have no WiFi at home, and its too late for me to be driving to a hotspot. Thank you very much. You(JCase) and your comrades who put this all together f**king rule.
a really clear and easy guide ! - congratulations - you shoud try to let it pin on top !
Ectoplasmic said:
NOTE 2: I've seen a lot of comments suggesting the driver install in Vashypooh's app doesn't work at this point.
Click to expand...
Click to collapse
the reason people have problems with vashipooh's driver installation seems to be the old drivers - they don't manage to clean up the old drivers:
disconnect KF
Open an (elevated for win7) command prompt:
set devmgr_show_nonpresent_devices=1
devmgmt.msc
device manager opens - click "view" - click "show hidden devices"
now you see all devices ever connected/installed
uninstall all devices regarding "kindle" and "android (composite) adb device"
connect KF - will startup by itself
select the most recent driver (that you have installed before by install_driver.bat from KFU) manually (check date/time)
now you should be set up with a good driver installation
btw. i'm on xp - it's working for xp and 7, 32 and 64 bit
I know that this is for second edition but I don't seen a forum for the first edition so this seems to be the closest match. Anyway I am trying to root my Nook Classic (the one with a E-ink display on the top and color touch screen on the bottom). I am following the instructions on nookdevs for rooting the Nook Classic on all hardware and firmware versions (I can't post the link here as I am new but PM me and I can pass it that way if you need). The method is that sometimes when the web browser browses a certain type of website it crashes and sometimes starts adbd and you can connect adb at that point.
I have managed to get adb to connect, pull the init.rc file, make the needed change, but when I try to push the ratc.bin file adb says it goes though but then the second command $ cd /sqlite_stmt_journals (after starting adb shell) says it is not found. So I can't go any further. ratc.bin is what gives root access long enough to push the init.rc back and without being able to run that, well I am up a creek.
Any ideas?
dob43 said:
I know that this is for second edition but I don't seen a forum for the first edition so this seems to be the closest match. Anyway I am trying to root my Nook Classic (the one with a E-ink display on the top and color touch screen on the bottom). I am following the instructions on nookdevs for rooting the Nook Classic on all hardware and firmware versions (I can't post the link here as I am new but PM me and I can pass it that way if you need). The method is that sometimes when the web browser browses a certain type of website it crashes and sometimes starts adbd and you can connect adb at that point.
I have managed to get adb to connect, pull the init.rc file, make the needed change, but when I try to push the ratc.bin file adb says it goes though but then the second command $ cd /sqlite_stmt_journals (after starting adb shell) says it is not found. So I can't go any further. ratc.bin is what gives root access long enough to push the init.rc back and without being able to run that, well I am up a creek.
Any ideas?
Click to expand...
Click to collapse
>> http://www.mobileread.com/forums/forumdisplay.php?f=209
>> http://www.the-ebook.org/forum/viewforum.php?f=44&sid=e250da1c3a4967da22dae8ca2d104ac8
Thanks osowiecki, I did find a thread on Mobile read shortly after I posted this. The other is non-english I am afraid, and sadly I only speak english.
Anyway I did mange to root my nook today. And I am posting here as I hope it will help someone in the future:
Yessssssssssssssss! I finally hacked my Nook Classic (Nook First Edition called by some)! I followed most of the instructions at http://nookdevs.com/Rooting_B&N_revision_1.4_to_1.7_on_any_hardware
I only tweeked in a few places. Here is a general list of what I did:
1. Look at the site above and grab the linked file (ratc.bin). Then go to this thread http://forum.xda-developers.com/showthread.php?t=1474956 and at the top there grab the adb + fasboot + drivers.zip. The reason I used this is because it is much smaller than the full Andriod SDK (which is over 500mb btw) and I figured this would work since it works for Nook Tablets. I didn't install the drivers or anything though. Just used adb.
2. Went with nook browser to http://nookadb.suspended-chord.info/ to crash the browser. If this should ever be down I see on the nookdevs page there is a discussion with the code that is on the crash page so you can put it on any web server and still do this procedure.
3. Once it crashed I went to cmd (comand prompt) and navigated to the folder that had the adb package I downloaded and decompressed earlier. I suggest putting this folder on your desktop for easy use. I gave the command
adb connect yournookip:5555 please note that the nookdevs instructions are not specific in that you NEED the :5555 after the IP. If it doesn't connect, keep crashing the browser by going to that page until it connect.
4. extracted the init.rc file with the command
adb pull /init.rc then edited as per the instructions on nookdevs
5. Now here is where things are different. I tried to push the ratc.bin file and while that seemed to work the commands after it didn't. It would keep saying the file wasn't there. I was cut and pasting the commands direct from the website so I don't think that was the issue. So what I did was grab the bat file at www.mobileread.com/forums/showthread.php?t=121655&page=2 by Jackr and edit it slightly removing the bit about location of adb and placed the bat in the same folder as adb on my desktop and ran it.
6. This actually worked and the bat prompted me to crash the browser again. I kept trying it took a while but as soon as I did it pushed the modifyed init.rc to the nook. The another reason why I think the bat/script is important as my nook totally froze a second after I crashed it. I think that if I was trying to paste that command manually after connecting I would still be trying lol.
7. After reboot I was fully rooted and I installed a bunch of apps from nookdevs using adb. Just make sure the apk (app file) is in the same directory as adb and use the command install nameofapp.apk
8. If you want to use nookmarket app to install files by itself then you need to:
adb connect nookIP:5555
adb shell
then type this after the #
/system/xbin/sqlite3 /data/data/com.android.providers.settings/databases/settings.db "update secure set value=1 where name='install_non_market_apps'"
It will allow nookmarket to install apps on the fly over the net. If you ever want to turn it back off just change the value=1 to value=0 in the above command. Of course you can always use adb, but it can be handy.
Of all the apps I would definitely suggest Nooklibary and wifilocker along with Nooksync. There are several other good nook apps such as trook. Oh I should also mention that Nook Browser still works fine. I think using the batfile/script helped with that situation.
I hope this helps someone who is thinking of taking the plunge (and trying to find out HOW). I wouldn't have bothered if B&N actually continued to update the Nook Classic and add the features that we BEGGED for (and are in NookLibrary). Instead of spending time adding things we didn't like games.
I've tried a thousand times, but always get "failed to copy 'init.rc' to '//init.rc': Permission denied" so RATC must not be working. And I'm on mac, so no bat. Any ideas?
lolbutts said:
I've tried a thousand times, but always get "failed to copy 'init.rc' to '//init.rc': Permission denied" so RATC must not be working. And I'm on mac, so no bat. Any ideas?
Click to expand...
Click to collapse
I would suggest looking at the bat, and creating the equivalent in apple script. If I remember right Mac's still have that option. Another option would be to run say WinXP in emulation (with virtual box for example) and do it that way.
How to root the original Nook tablet (model number: BNRZ100)
dob43 said:
Yessssssssssssssss! I finally hacked my Nook Classic (Nook First Edition called by some)! I followed most of the instructions at http://nookdevs.com/Rooting_B&N_revision_1.4_to_1.7_on_any_hardware
Click to expand...
Click to collapse
Okay, since nookdevs.com has apparently been down for sometime now, I was checking out the mobileread.com link that was shared above and found out the info that I have been searching for to find out how to root the Nook. Be forewarned that I have not tried this yet, but I am about to, and afterwards I will post the results, I am just posting it as sort-of a guide for myself and anyone interested at this point. I will edit this post accordingly once I am successfully rooted.. Please see below for links / details.
Disclaimer: I am not responsible for any damage that is done by you to your Nook, either physically or otherwise. I am just showing you what I have researched and if you choose to follow these directions it is at your own risk.
Which Nook Device Do You Have?
click here to find out:
http://glyde.com/glydecast/how-to/which-nook-do-you-have/
Remember, this is for the first generation only (model number: BNRZ100)
Here is a visual aid that will help you find the SD card that you need to look for once you get the Nook opened up (yes, you will need to open your Nook and access the motherboard):
http://www.wired.com/2009/12/nook-torn-open-hacked-and-rooted/
How to open the Nook up:
https://www.youtube.com/watch?v=GEDqiNiQFHk
Hint: you don't need to take to front panel / bezel off, just the back section because all we need is access to the motherboard to be able to remove the internal SD card, which contains the file that we will be editing.
Finally, the info that you need to root the device (also posted below the link for quick reference, and just in case the link gets broken):
http://www.mobileread.com/forums/showthread.php?t=128210
How to root the Nook, after you figute out how to open it up:
Just you need a microSD Card reader + Linux (any linux ) !
just you should remove the System file MicroSD ( which is inside the Nook )
put it in your PC , change the "init" file with Any txt editor !
just find "service adbd /sbin/adbd" and change the "disable" to "enable" ...
you are done !
Wow I had no idea that Nookdevs went down. Thankfully I did archive all the information on that page. While the method you mentioned is great, and the best, only the earliest nook classic's had removable system SD cards. After the first batch they were soldered chips instead.
With that in mind I am posting what was contained in the link I posted before on NookDevs since it is not available on the internet archive.
------------
This method of rooting is known to work on B&N firmware revisions 1.4-1.7, on all hardware versions. Unlike the other rooting methods, this one involves an element of luck -- it takes advantage of a memory-corrupting bug in the web browser, and its success depends on the current contents of the memory which depends on more variables than we can control. As such, the method requires a little bit of (or more) patience. Warning: After this root is completed, the web browser will be irreversibly damaged.
Contents
1 Preparation
2 Enable adbd on the Nook
3 Pull and modify /init.rc
4 Getting root access
4.1 Keeping root access
5 Your rooted Nook
6 Notes
Preparation
Install Google's Android platform tools from developerdotandroiddotcom. These include many useful utilities, such as the ADB control software.
Open up a terminal to use ADB
Open a command prompt
Navigate to the directory that you installed, then go into the platform-tools subdirectory. This is where the adb executable lives.
Connect your nook to the same WiFi that your computer is on. You need direct (non-firewalled) access to the Nook's IP address to connect via ADB.
Find your Nook's IP address (How to find our your nook's IP address)
Write it down somewhere.
Enable adbd on the Nook
This is the luck portion of the root. adbd is the other half of ADB: ADB runs on your computer, and tries to connect with adbd on the nook. Once connected, you can issue commands, shuffle files, and install applications. Our final goal is to be able to start and stop adbd at will[1].
Open the Nook's web browser and navigate to the web site nookadb.suspended-chord.info. You may want to bookmark the page for a quicker access.
When you load this web page, the browser will crash. (It may automatically reload itself a few times first.) After it crashes, it might enable adbd.
Go back to the command prompt on your computer, and type:
adb connect <nook's IP>
One of two things will happen:
You will get the message unable to connect to <ip address>:5555.
In this case, restart your web browser and load the web page again (from the history or the bookmark). You may have to do this a dozen times or more, so keep at it!
You will get the message connected to <ip address>:5555.
Success!
At this point you have (temporarily) access the nook via ADB, can now enter commands on your PC for the Nook, and can move files back and forth. If you reboot the nook, adbd (the nook companion to ADB) will not be running.
Pull and modify /init.rc
If this isn't your first time through, and you have a modified copy of init.rc, skip this step.
Now that you can connect into the Nook, you will want to pull and edit the /init.rc file. This file is run when the nook turns on, and includes an option to enable adbd (disabled by default). Download the file to your PC with:
adb pull /init.rc
Open this file with Notepad (or a different plain text editor), and find the part the lines:
service adbd /sbin/adbd
disabled
Change 'disabled' to 'enabled' and save the file.
Getting root access
You got the web browser to launch adbd, but you only have the privilege level of the web browser's user - system. To install software and to start adbd when the Nook reboots, you need root access. Rage Against the Cage will give you root access. Next, you'll restart adbd, and push the modified init.rc back to the nook. After that, reboot the nook and you're done!
Download [ratc.zip].
Extract it to the same directory that adb is stored in, then go back to the command prompt:
adb push ratc.bin /sqlite_stmt_journals
adb shell
$ cd /sqlite_stmt_journals
$ /system/bin/chmod 777 ./ratc.bin
$ ./ratc.bin
(several lines of output follow -- don't do anything, a few seconds later adb will disconnect you.)
Keeping root access
If everything went well, you should have root access on the Nook. However, the Nook is now relatively unstable and may stop working at any point, so work quickly!
The nook may crash - just reboot, then restart the process from scratch. (Remember, you don't need to pull init.rc again.)
First, you need to stop your PC's ADB server. It still thinks that it's connected to the nook.
adb kill-server
Second, you need to re-establish the connection with adbd on the nook and then push init.rc file. You can do this by typing these commands[2]:
adb connect <nook IP>
adb push init.rc /
Perform the browser crash procedure again. After each attempt, check if the computer successfully transferred init.rc. If it did, you're done!
If the nook crashes before the transfer completes (so you are not able to connect to your nook), go back to "Enabling adbd on the Nook". You can skip "Pull and modify /init.rc", but do the other steps.
If the adb push gives a permission denied error, redo the "Getting root access", and try again. You may have to do this quite a few times until the whole process succeeds.
Your rooted Nook
Assuming everything worked, you now have a rooted Nook with adbd running on reboot, with root access. You should be able to establish the connection with adbd on the nook without jumping through any other hoops.
What's next? Browse the applications, and install to your heart's content.
Suggestions:
Mynook.ru Launcher A polished replacement launcher. You must replace the launcher to access additional applications with the nook.
Trook A RSS feed reader for the nook, and much more! It can install applications, too. Just go into the nookdevs feed.
NookLibrary A replacement library for the nook. If unifies sideloaded books with Barnes & Noble content, and offers other improvements.
NookMarket A program that allows you to easily install everything on nookdevs. Trook offers more functionality (imho)
Games There are a few games on the applications page.
Notes
↑ There's also a Python script to automate the process: root-nook-eink.tar.xz (Updated Jun 6 , 2011)
↑ You may want to run a script that automatically issues the following commands, reducing the chances of the nook crashing before init.rc has been pushed to it. In this case, extract this [batch file] to the same directory as ADB. Run it by typing:
push.bat
It will prompt you for your nook's IP address, then try connecting. Every few seconds, ADB will complain that it can't connect to the nook. Let's fix that.
------------------------------------------------
The above is from Nookdevs.com and I did not write it I am only posting it here as the site has went down.
I am also posting the html file that is needed to do this (although here it is in txt format). If the the site listed above ever dies you can put this on a website somewhere to use it. And the ratc.bin file needed.
And finally I am adding the apps that make rooting the nook classic worth while. The improved library definitely. Which btw are two parts, the library app and the nooksync which enables you to download from B&N directly. Otherwise you need to use the normal nook library app to download then you can read with the nookdev version. I am not sure which version of the library works best, been a while since I installed it so I included both.
Also wifilocker is great to turn wifi on/off not to mention lock it and keep the nook from going to sleep while you are connected to adb. I definitely suggest installing that as well. The others are handy. Trook can connect to calibre and download books from your desktop. The nook browser is a improved web browser for nook classic, although I never really bothered with it.
Nook notes is good for quick little notes when you don't have any other device handy. Txt reader reads txt files, not the best but it is handy. Personally I just make epubs of anything with calibre. But if you don't want to bother making a epub first, this is handy.
Hope this helps someone!
I downloaded files and rat.bin has malware in it.
I also have hard time understanding the ones that are explained above. Is there any easier way to do it? Does anybody have a good tutorial video or "fool-proof" instruction on this? I have Nook classic wifi version.
I would like to read kindle books on nook as well as the nook books. Is this even possible on this model?
Thanks for the help
kidollt said:
I downloaded files and rat.bin has malware in it.
I also have hard time understanding the ones that are explained above. Is there any easier way to do it? Does anybody have a good tutorial video or "fool-proof" instruction on this? I have Nook classic wifi version.
I would like to read kindle books on nook as well as the nook books. Is this even possible on this model?
Thanks for the help
Click to expand...
Click to collapse
Er of course rat.bin would be flagged as malware, because technically it is. You are hacking a system that is designed not to let you in. But in this case all rat.bin will do is let you in so you can get root of your own device, nothing else. No back doors for anyone else or making your device do odd things.
The problem you are having is not using rat.bin, without that you might as well not try. I also only managed to do it with a BAT file so that it would keep trying to push the init.rc RIGHT AFTER the rat.bin was used. Generally you can't type fast enough to do the push. The window of opportunity is very very small.
This does work but is tricky as the window of opportunity is very small. I tried for hours trying to get it to work, then I used the BAT file to make the push automatic and on the second try it worked. Rooting the Nook Classic is the toughest device to root that B&N made. If you have one of the really early models that has a removable internal SD card then you can pull that, made modifications (install a old version of the ROM, make a modification to init.rc), and reinstall the SD card. I forget the serial numbers of the models that this worked with, but I do know it was the first batch of Nooks B&N made. If you got yours after the first Christmas, then it is likely it doesn't have a internal SD card that you can remove. Later on they soldered them to the board.
As for reading kindle books, no. There isn't a mobi reading app that I have found, let alone kindle books with DRM. The better bet is to use Calibre calibre-ebook.com to convert your kindle books to epub. But they can't be encrypted/DRM. If they are, then you have to remove that. There are scripts for Calibre that can do it for nook and kindle. I use calibre to convert my mobi/kindle books to epub then side load them. Another benefit of rooting a nook classic, you can then browse and download wireless from your calibre library with the took app. Although I never bothered and just did the transfers via USB.
Hi!
I would like to ask for help in this case:
I followed all the instructions here, however for some reasons I wanted to install this app first using the command "adb push Home.apk /system/app" pushing the app found here: Github
Now it turns on/off, shows "Home", batter and time at the top bar, but everything else is black both the Eink screen and the touchscreen as well.
It does not connect to wifi automatically so I can't connect via ADB to switch back to the original Home apk
Please help me, what should I do?
Is 1.7 software not rootable?
I can't get adb to come on, no matter how many browser crashes I do. Even wrote a script for it:
@echo off & setlocal
set IP=192.168.0.119
set loopcount=0
set s
:loop
set /a loopcount=loopcount+1
echo Connecting %loopcount% time...
adb connect %IP% | find /i "connected to" > %s
if errorlevel 1 (
echo Not successful + %ERRORLEVEL% + %s%
goto loop
) else (
echo Successful + %ERRORLEVEL% + %s%
adb shell
goto exitloop
)
:exitloop
pause
Click to expand...
Click to collapse
Is OTA rooting (by redirect on sync.barnesandnoble.com) not possible any longer as well?
Sorry for the late response, for some reason the email telling me there was a post here just arrived TODAY lol.
It should be, I did it with 1.7. The script I have I modded a little from another one I found online here is mine:
Code:
@echo off
echo The website hack seems to work on the round right after it has an instant crash.
echo.
adb kill-server
adb start-server
set /p ip=Enter the IP here.
:CON
cls
echo Crash the browser.
echo.
adb connect %ip%
for /f "tokens=2" %%A in ('adb devices') Do (Set dev=%%A)
if %dev%==device goto INT
echo.
goto CON
:INT
if exist ratc.bin (set f1=1) else (set f1=0)
if exist init.rc (set f2=1) else (set f2=0)
if %f1%==%f2% (if %f1%==1 (goto RTT) else (goto 2fi)) else (goto 2fi)
:2fi
if %f1%==0 (echo "The ratc.bin file is not in the %cd% directory.") else (echo Ratc.bin file present.)
echo.
if %f2%==0 (echo "The init.rc file has not been pulled from the device to the %cd% directory, pulling now.") else (echo Init.rc file present.)
if %f2%==0 adb pull /init.rc
echo.
echo Please add the required files and restart this batch. If init.rc was just pulled, you will need to modify the file.
cmd
:RTT
adb push ratc.bin /sqlite_stmt_journals
adb shell cd /sqlite_stmt_journals
adb shell /system/bin/chmod 0777 /sqlite_stmt_journals/ratc.bin
adb shell /sqlite_stmt_journals/ratc.bin
adb kill-server
adb start-server
goto CO2
:CO2
cls
echo Re-crash the browser.
echo.
adb connect %ip%
for /f "tokens=2" %%A in ('adb devices') Do (Set dev=%%A)
if %dev%==device goto PSH
echo.
goto CO2
:PSH
adb push init.rc /
adb shell reboot
echo.
echo Congrats! The device is now rooted.
echo.
cmd
It is RANDOM on the browser crashes. Sometimes it happens fast, another time it look me a hour or two to get a good crash and root the nook. Also if it doesn't seem to be doing it for a long time, try rebooting the nook (hold down the power until the screen blanks then press the button again to restart it). In my opinion, this is the toughest Nook to root, but definitely worth it. Especially now that B&N ended support some time ago. Also make sure the ADB, this script, and the ratc.bin is in the same folder. I used a folder on the desktop as it made it much easier/faster to get to. Also after you get the init.rc and modded, that should be in the same folder as well.
As for OTA rooting, I have no idea if it will work or not. I never used that method. But if it depended on any sort of connection from B&N, I doubt it will work now since they have abandoned the Nook classic.
If you need any of the nook apps that were on the nook developer site let me know. I downloaded all the apps before the site went down.
dob43 said:
Sorry for the late response, for some reason the email telling me there was a post here just arrived TODAY lol.
It should be, I did it with 1.7. The script I have I modded a little from another one I found online here is mine:
Code:
@echo off
echo The website hack seems to work on the round right after it has an instant crash.
echo.
adb kill-server
adb start-server
set /p ip=Enter the IP here.
:CON
cls
echo Crash the browser.
echo.
adb connect %ip%
for /f "tokens=2" %%A in ('adb devices') Do (Set dev=%%A)
if %dev%==device goto INT
echo.
goto CON
:INT
if exist ratc.bin (set f1=1) else (set f1=0)
if exist init.rc (set f2=1) else (set f2=0)
if %f1%==%f2% (if %f1%==1 (goto RTT) else (goto 2fi)) else (goto 2fi)
:2fi
if %f1%==0 (echo "The ratc.bin file is not in the %cd% directory.") else (echo Ratc.bin file present.)
echo.
if %f2%==0 (echo "The init.rc file has not been pulled from the device to the %cd% directory, pulling now.") else (echo Init.rc file present.)
if %f2%==0 adb pull /init.rc
echo.
echo Please add the required files and restart this batch. If init.rc was just pulled, you will need to modify the file.
cmd
:RTT
adb push ratc.bin /sqlite_stmt_journals
adb shell cd /sqlite_stmt_journals
adb shell /system/bin/chmod 0777 /sqlite_stmt_journals/ratc.bin
adb shell /sqlite_stmt_journals/ratc.bin
adb kill-server
adb start-server
goto CO2
:CO2
cls
echo Re-crash the browser.
echo.
adb connect %ip%
for /f "tokens=2" %%A in ('adb devices') Do (Set dev=%%A)
if %dev%==device goto PSH
echo.
goto CO2
:PSH
adb push init.rc /
adb shell reboot
echo.
echo Congrats! The device is now rooted.
echo.
cmd
It is RANDOM on the browser crashes. Sometimes it happens fast, another time it look me a hour or two to get a good crash and root the nook. Also if it doesn't seem to be doing it for a long time, try rebooting the nook (hold down the power until the screen blanks then press the button again to restart it). In my opinion, this is the toughest Nook to root, but definitely worth it. Especially now that B&N ended support some time ago. Also make sure the ADB, this script, and the ratc.bin is in the same folder. I used a folder on the desktop as it made it much easier/faster to get to. Also after you get the init.rc and modded, that should be in the same folder as well.
As for OTA rooting, I have no idea if it will work or not. I never used that method. But if it depended on any sort of connection from B&N, I doubt it will work now since they have abandoned the Nook classic.
If you need any of the nook apps that were on the nook developer site let me know. I downloaded all the apps before the site went down.
Click to expand...
Click to collapse
Does this still work? I recently dug up my old nook 1st edition, I tried the website and it didn't crash my browser, it just sat there forever loading.. I looked at the site, now it's using TLS 1.3, but old nook 1st edition is stuck with TLS 1.2... I tried for many hours just couldn't "crash" the web browser at all...
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Update 02/03/2015
This guide I posted is well out of date, there are other methods to follow now days.
Please use http://www.aftvnews.com/tag/guide/ as it is up to date and current.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Thanks to AFTVNews.com for the OTA link and rbox for pointing me in the right direction I've successfully manually upgraded to the latest firmware, downgraded back to 51.1.0.2 and am now upgrading back to 51.1.1.0.
This is the process I followed. I take it for granted that you rooted, have SU and Busybox free installed.
Don't blame me if you **** your device up and you have a brick.
So lets get to it:
1. Download which ever firmware you wish to restore to:
Code:
51.1.0.1
http://amzdigitaldownloads.edgesuite.net/obfuscated/e6f65fefb36aaf7b94fd370f516b9c11/bueller-ota-51.1.0.1_user_510055620-signed.bin
51.1.0.2
http://amzdigitaldownloads.edgesuite.net/obfuscated/cec02756d1964c9cb1f71d52056cc81a/bueller-ota-51.1.0.2_user_510058520-signed.bin
51.1.1.0
http://amzdigitaldownloads.edgesuite.net/obfuscated/568eef32595f034b4304e19aa566befb/bueller-ota-51.1.1.0_user_511069920-signed.bin
51.1.1.0 Update 1
http://amzdigitaldownloads.edgesuite.net/obfuscated/4edaba705e98dee475680c33d3f41132/bueller-ota-51.1.1.0_user_511070220-signed.bin
2. Rename which ever one you wish to restore to update.zip
3. adb shell
4. su
5. chmod 777 cache
6. cd cache
7. chmod 777 recovery
8. cd recovery
9. echo --update_package=/cache/update.zip > command
10. ctrl + c
11. adb push update.zip /cache
--- Go make coffee or take a ****....The pushing of 466MB takes forever over wireless.---
An alternative is to copy update.zip to a USB Flash Drive, use StickMount to mount on the FireTV then copy it with the following command:
cp /sdcard/usbStorage/sda1/update.zip /cache
12. adb reboot recovery
Now it should reboot and start installing whatever update you downloaded and called update.zip :good:
If you get the out of space error:
roligov said:
No it's not because the updates are blocked, it's because you out of space in your cache partition. ADB shell to the box and run
ll /cache
If you have any bin files, delete them.
Click to expand...
Click to collapse
1. adb shell
2. su
3. rm /cache/*.bin
Nice
Nice work and great news! No reason not to update to the latest version since we can downgrade too.
Thanks. Should we delete the file after the update to save on the space or is it automatically deleted?
It automatically gets deleted. It's late this side so I'm going to bed.
Will do some testing tomorrow before I give the go ahead and tell everyone it's all working!
Wow!! I knew someone would figure it out, just did not think it would be this soon. Thank you for the work!!
One step closer to an unlocked bootloader...
Super guide, worked like a charm - thank you!
Good work! Thank-you.
zahir32 said:
Super guide, worked like a charm - thank you!
Click to expand...
Click to collapse
would there be a way to do this via shh
you should probably make a mirror of those firmware bundles. :good:
wavrunrx said:
you should probably make a mirror of those firmware bundles. :good:
Click to expand...
Click to collapse
Good point. I'll dl them tonight and leave them on my NAS. Eventually i"ll put them on dropbox or other filelocker for safekeeping
Getting It Done
bdscds said:
would there be a way to do this via shh
Click to expand...
Click to collapse
This method gets it done. I've tried others, but these instructions - and the fact that the OP has kindly prepared the "command" file for us - make it an easy ride. Just put the update zip in the same folder as your ADB setup, open your command window in that folder and adb will find it.
Thanks!
With this we can safely update to latest version!
Nice guide
Sent from my iPhone using Tapatalk
Can this be done over a local network or do I have to hook the Fire TV up to my PC using a USB (Male to Male) lead?
gazdaman. said:
Can this be done over a local network or do I have to hook the Fire TV up to my PC using a USB (Male to Male) lead?
Click to expand...
Click to collapse
http://www.firetvnews.com/how-to-sideload-apps-to-your-amazon-fire-tv-using-a-windows-pc/
network
shows you how to use adb, so you can do "adb shell"
be careful though, if you were to mess anything up in the process you could render your fire tv useless.
roligov said:
Thanks to FireTVNews.com for the OTA link and rbox for pointing me in the right direction I've successfully manually upgraded to the latest firmware, downgraded back to 51.1.0.2 and am now upgrading back to 51.1.1.0.
This is the process I followed. I take it for granted that you rooted, have SU and Busybox free installed.
Don't blame me if you **** your device up and you have a brick.
So lets get to it:
1. Download which ever firmware you wish to restore to:
Code:
51.1.0.1 update
http://amzdigitaldownloads.edgesuite.net/obfuscated/e6f65fefb36aaf7b94fd370f516b9c11/bueller-ota-51.1.0.1_user_510055620-signed.bin
51.1.0.2 update
http://amzdigitaldownloads.edgesuite.net/obfuscated/cec02756d1964c9cb1f71d52056cc81a/bueller-ota-51.1.0.2_user_510058520-signed.bin
51.1.1.0 update
http://amzdigitaldownloads.edgesuite.net/obfuscated/568eef32595f034b4304e19aa566befb/bueller-ota-51.1.1.0_user_511069920-signed.bin
2. Rename which ever one you wish to restore to update.zip
3. adb shell
4. su
5. chmod 777 cache
6. cd cache
7. chmod 777 recovery
8. cd recovery
9. wget http://dl.dropboxusercontent.com/u/16913146/command
10. ctrl + c
11. adb push update.zip /cache
--- Go make coffee or take a ****....The pushing of 466MB takes forever.---
12. adb reboot recovery
Now it should reboot and start installing whatever update you downloaded and called update.zip :good:
Click to expand...
Click to collapse
Thanks for the info! I hear the new update offers nothing new and causes more problems than good by disrupting the alphametical order of sideloaded apps. Is it worth updating for or will there be no significant differences? It's funny because amazon.com don't mention a new update release.
Also does you update method require you to re-root the device or does root survive the update? Thanks very much!
Got it working with Windows 7
This is how I done it.
(Ensure you have ADB installed - If not google "ADB setup 1.3 windows")
Download the chosen firmware and rename it to update.zip
Download roligov's command file
remove the .txt extension that windows gives it when you download it. The filename should just be "command" with no extension otherwise you will get the failed message when you reboot to recovery.
Now run command prompt as Administrator
(I will use C:\ as the file location example)
adb kill-server
adb start-server
adb connect "Fire TV IP Address"
adb shell
su
chmod 777 cache
cd cache
chmod 777 recovery
ctrl + c
adb push C:\command /cache/recovery
adb push C:\update.zip /cache
--- Go make coffee or take a ****....The pushing of 466MB takes forever.--- (Took 2 minutes over LAN for me)
adb reboot recovery
Done
Many thanks to roligov for the initial find to set me on my way.
Yeah my FireTV is hooked up to my Wireless so it takes forever to push the update.
roligov said:
Yeah my FireTV is hooked up to my Wireless so it takes forever to push the update.
Click to expand...
Click to collapse
if one has a usb thumb drive and stick mount installed, copying the .bin to the /cache folder step might be faster?
User copies .bin file(s) and command file to a folder on thumb drive where a script file which lists .bins in thumbdrive folder and allows user to choose a numeral and then executes commands for update process would be cool for newbies. even having the script "autocreate" the command file.
So I've come across a quirk that I haven't been able to resolve and haven't noticed before getting my G5. When I run
Code:
adb devices
on my computer with my phone connected, it shows my device but says unauthorized. I cannot seem to authorize my device. I have tried:
Revoke USB Debugging Authorizations (option not available in Developer Options)
Delete adb_keys in /data/misc/adb/ (No adb_keys file in the folder)
Create adb_keys file on my computer using the computers public key (Phone deletes this file on boot)
I realize this is more of a general Android question, but as it hasn't happened to me on any other phone, I wanted to see if anyone else was having this trouble.
Same boat here, haven't been able to fix the issue. I believe there's a testboot3.img floating around that fixes it. I downloaded it awhile ago as I keep a eye on everything for this device. But I don't know if it does and if you flash a new boot.img I'd think it would override it. I've tried your method as well.
I am also having this issue. Does anyone have a solution?
To update this for those that need it; this toolkit worked to fix this issue for me in Linux. I just hit the red block in the upper left that says "unauthorized device" when the phone was plugged in. Not sure what the kit did but then my phone finally asked if I wanted to allow the computer access. After doing that I finally got "authorized" when running "adb devices" in ubuntu.
https://forum.xda-developers.com/g5-plus/development/toolkit-moto-g5-plus-toolkit-root-t3605203
A fix if you are running Windows (or Linux)
I just found a fix that worked for me.
(Although i got the "unauthorized" status with the phone running as usual, I didn't get the same problem when in recovery mode.)
I followed instructions from this site but needed to change Linux commands to simliar Windows commands: http://www.neuraldump.com/2017/05/how-to-fix-adb-unauthorized-error/
If you are using Windows, you'll need to follow the commands below:
- First things first:
- Phone: Check if you have a file called adb_keys located at: /data/misc/adb/adb_keys. If you have it, i would recommend you to backup the file. (I didn't have it.)
- Windows:You'll need to have a file called adbkey.pub located at C:\users\UserAccount\.android\
- Boot into recovery mode.
- Plug your phone into PC.
- Open cmd and run adb devices. It would show "recovery" instead "unauthorized".
- Create a new file called adb_keys file on your PC:
Code:
type NUL > adb_keys
- Now you need to copy the contents from the adbkey.pub to adb_keys, the new file you just created:
adbkey.pub is located at C:\users\UserAccount\.android\
(Needless to say you need to replace "UserAccount" when running the command)
Code:
type c:\users\UserAccount\.android\adbkey.pub > adb_keys
- Upload the adb_keys file to your phone:
Code:
adb push adb_keys /data/misc/adb/adb_keys
- Reboot and run adb devices. It should be working now.
(Thanks to Tony, the guy who posted this fix in his blog).
need help please. Cant do it. I have that problem on my moto g5 plus. Dont understand this. Windows 10 pro computer.
Edit: I solved using the adb_keys from my xperia and using root explorer on my moto g5 plus and paste on data/misc/adb/adb_keys
Awesome! You may need to change permissions like I did from using root user within a debian chroot. Just like ssh keys....
From twrp recovery console.
chmod 0644 /data/misc/adb/adb_keys
chown -u shell /data/misc/adb/adb_keys
That got me authorized and running a root shell to spoof fingerprint before getting past first Hello page of setup
Yep, it works on my side as well on a Samsung galaxy Note 3, RROS 8.6.1, very good tip!:good:
@mnoguti
thank you, this fix my Verizon Note 4 issue with Smali Patcher not detecting my phone.
Thank you! My Galaxy S4 GT-i9505 also had this issue and your guide let me succesfully use adb normally again!
mnoguti said:
A fix if you are running Windows (or Linux)
I just found a fix that worked for me.
(Although i got the "unauthorized" status with the phone running as usual, I didn't get the same problem when in recovery mode.)
I followed instructions from this site but needed to change Linux commands to simliar Windows commands: http://www.neuraldump.com/2017/05/how-to-fix-adb-unauthorized-error/
If you are using Windows, you'll need to follow the commands below:
- First things first:
- Phone: Check if you have a file called adb_keys located at: /data/misc/adb/adb_keys. If you have it, i would recommend you to backup the file. (I didn't have it.)
- Windows:You'll need to have a file called adbkey.pub located at C:\users\UserAccount\.android\
- Boot into recovery mode.
- Plug your phone into PC.
- Open cmd and run adb devices. It would show "recovery" instead "unauthorized".
- Create a new file called adb_keys file on your PC:
Code:
type NUL > adb_keys
- Now you need to copy the contents from the adbkey.pub to adb_keys, the new file you just created:
adbkey.pub is located at C:\users\UserAccount\.android\
(Needless to say you need to replace "UserAccount" when running the command)
Code:
type c:\users\UserAccount\.android\adbkey.pub > adb_keys
- Upload the adb_keys file to your phone:
Code:
adb push adb_keys /data/misc/adb/adb_keys
- Reboot and run adb devices. It should be working now.
(Thanks to Tony, the guy who posted this fix in his blog).
Click to expand...
Click to collapse
Thank you so much, you saved my life
I got tired of having to jump between a bunch of threads when setting up my Glowlight 3. So I'm consolidating directions into one post in the hopes that it'll save others time and trouble. Credit for instructions should go to the people who actually wrote them: arnchav of mobileread; RyogoNA, Silent eInk, cazar and Renate NST here on xda; and everyone who figured out the root exploit, sideloading, the devs behind Relaunch, RelaunchX and F-Droid. Material lifted from their original posts (linked at the bottom).
Now, this is going to walk you through doing a few things:
A) Setting up a progam called ADB on your computer so that it can talk to your NG3
B) Adding a "Launcher" app to your nook so that you can access other apps you sideload later
C) Root theNook so that you can do more stuff with the settings, including the ability to...
D) Fix a bug that, after installing a launcher, causes the NG3 to get stuck on the loading screen after rebooting
Before you start, you need to set up ADB on your computer. Follow the instructions linked here. The rest of this post will assume you're using Windows, but won't be hugely different from other OSs.
Here we go:
To set up ADB on your nook:
1. On your Nook, go to Settings>About. You should see the serial number, app version, etc. At the top of that page, there is a nook icon. Tap that icon rapidly until the developer menu opens.
2. Tap "Android Development Settings" and check the box for "USB debugging".
3. At the Developer options screen you are on (where you checked the box), hit the back arrow at the top-left of the screen to go back. But do not exit the developer menu.
4. On your computer, open a command prompt and navigate to the folder where you put adb (in my case I typed in "cd adb/platform-tools")
5. Plug the USB in to the nook. When the nook prompts you to turn on USB mode, do so. At the adb command prompt, type adb devices. ADB should recognize the nook, but say that it is unauthorized.
6. From windows, eject the nook to disconnect nook's file sharing. Once the nook's USB file sharing screen goes away, you should be able to see the developer menu again. Tap "Allow Debugging" one time! There will be no confirmation, just do it one time.
6. Unplug the USB, plug it back in, turn on USB mode when prompted. Back in the command prompt, type adb devices again. This time it should see the device and simply say "device" where it used to say "unauthorized". Congratulations! You can now install a launcher.
To install a launcher, like RelaunchX
1. Download your launcher apk of choice. If you don't know what to pick, try RelaunchX, and download the latest version from plusz's thread here: https://www.mobileread.com/forums/showthread.php?t=284418 (n.b. To make things easy, ignore his suggestion to get it through F-Droid as you'll need a new launcher to use F-Droid in the first place. Just download the apk).
2. In Command prompt, type adb install <filelocation>, where filelocation is the complete address of the apk. If you have file explorer open, you can just type adb install then a space, then drag the file in to the terminal and it will copy the location for you. (Make sure again that there is a space between "install" and the path or it won't work).
3. ADB should do it's thing and you will get a "success" message in Terminal.
4. Eject the nook from the PC. Shortly after the connection is cut, a window should open on the nook allowing you to select either the nook launcher or your new launcher. If you use RelaunchX, you may get a warning that it wasn't built with this device in mind. You can ignore it, it works great on this device.
This is all great, except there's a bug in how B&N set up the device that only shows up if you install a new launcher. If you reboot the device, you'll be stuck on the boot animation until you do weird things like hold down the power button for a long time to pull up the reboot/power off options (only seems to sometimes work). To fix that, we actually have to disable, remove, or replace the boot animation file itself.
To root:
1. Download the modified Glowlight Plus script attached here ("rootGL3.zip" - almost identical to cazar's rooGLP-3 script package, but with one line changing the model number from 510 to 520)
1. Enable USB debugging in Developer options
2. Connect USB cable and make sure your nook is showing up in 'adb devices'
3. Extract rootGLP.zip and run rootnook.cmd (or rootnook.sh on linux)
To fix (read: disable) the buggy boot animation:
1. Connect your nook to the computer again
2. (windows) open a command prompt and and navigate to the folder that adb is in.
3. Enter the following commands, in order:
Code:
adb shell
su
mount -o remount, rw /system
mv /system/bin/bootanimation /system/bin/bootanimation.bak
reboot
OPTIONAL: To restore a working boot animation (steps above will replace broken boot animation with a black screen that goes away after a few seconds)
1. Download the attached zip
2. If it's not still connected, connect the Nook to the computer again and tap the button on the nook to turn on USB mode when prompted,
3. On your computer, open up the Nook in Explorer(/Finder/your file manager of choice). Open up the NOOK Folder if you see one.
4. Copy the file inside the zip (bootanimation) to that folder on the Nook.
5. Eject the nook (as in, in windows, click the option to safely remove it as a device) but keep it physically connected
6. Open a command prompt(/terminal/whatever you use for adb) and navigate to the folder that adb is in.
7. Enter the following commands:
Code:
adb shell
su
mount -o rw,remount -t ext4 /dev/block/mmcblk0p5 /system
cp /storage/spsd/NOOK/bootanimation /system/bin/bootanimation
cd /system/bin
chmod 755 bootanimation
reboot
You now have a rooted Nook Glowlight 3 that'll boot into a launcher of your choice! You can now sideload apks of your choice using adb the same way you installed RelaunchX.
Have fun!
Sources for these instructions:
https://www.mobileread.com/forums/showpost.php?p=3632665&postcount=118 (how to sideload onto nook 3)
https://forum.xda-developers.com/showpost.php?p=75717722&postcount=113 (same as above, diff user)
https://www.mobileread.com/forums/showthread.php?p=3632665#post3632665 (to get RelaunchX)
https://forum.xda-developers.com/showpost.php?p=64191791 (for nook GLP rooting script)
https://forum.xda-developers.com/showpost.php?p=76042888&postcount=127 (to fix boot animation loop)
HELP! I DID THIS A LONG TIME AGO AND NOW MY NOOK GLOWLIGHT 3 IS STUCK ON THE LOADING SCREEN!
Don't worry, this is fixable. What's happened is that Barnes and Noble pushed out a system update that undid almost everything except that part that breaks the boot animation thing (specifically it overwrites the directory with everything that gives you root access and a working boot animation, but left your custom launcher in place).
All you have to do is re-do most of the steps above. Start from the "to root" step - even if the device is stuck on a boot animation, you should still be able to use adb. After redoing the steps, your GL3 should work normally again.
Unfortunately it looks like this is going to happen every time B&N pushes a system update, but that's not that often.
If someone knows a step-by-step way to replace the stock bootanimation with the 4.6 bootanimation file (zipped up and attached here, thanks to RyogoNA), let me know and I'll update the OP. I tried used adb shell to copy it to /system/bin/bootanimation, but I still just get a black screen on startup in its place.
jptiger said:
I still just get a black screen...
Click to expand...
Click to collapse
Mmm, did the copy of bootanimation work?
Did you:
Code:
/system/bin # chmod 755 bootanimation
Tried that, but I got an error about a Read-only file system, even after using su. What's the basic thing I'm missing?
jptiger said:
Tried that, but I got an error about a Read-only file system, even after using su. What's the basic thing I'm missing?
Click to expand...
Click to collapse
Got a private message pointing me to the command I was missing, apparently from a how-to page in Russian. For anyone else trying to do this, try:
Code:
mount -o rw,remount -t ext4 /dev/block/mmcblk0p5 /system
cd /system/bin
chmod 755 bootanimation
Can't get adb devices to give autorhized access to ng3 w 4.9.2.24 os
First off thank you for doing this work, and I am excited to root my ng3!
In trying to follow your directions on rooting, I am hitting a snag. The os is not operating in the anticipated manner. When I do the usb unplug and replug and hit the usb debugging checkbox I can not get authorization.
Please help!
Thanks in advance!
Trouble with root
Hi,
Thanks for putting this all together. However, I'm having trouble with the root step.
You'll have to put the link together because as a new poster I can't post links.
Any help would be appreciated!
imgur . com
/a
/ckm0jRq
xelcho said:
First off thank you for doing this work, and I am excited to root my ng3!
In trying to follow your directions on rooting, I am hitting a snag. The os is not operating in the anticipated manner. When I do the usb unplug and replug and hit the usb debugging checkbox I can not get authorization.
Please help!
Thanks in advance!
Click to expand...
Click to collapse
Hmm. Did you get authorization after following the directions under "To Set up ADB on your Nook"?
L3R0k2b2 said:
Hi,
Thanks for putting this all together. However, I'm having trouble with the root step.
You'll have to put the link together because as a new poster I can't post links.
Any help would be appreciated!
imgur . com
/a
/ckm0jRq
Click to expand...
Click to collapse
Ooh, that's exotic. I've never seen that before. Just going off the error text, you might need to find a newer version of adb somewhere online. Try that or try a different computer?
Adb is super stable for many years now, although it can fail to connect to your device properly for many reasons.
Can you reach developer menu navigating with nooks keys? I sometimes enable /disable /enable usb Debug, followed or preceded by revoking all PC's permissions. These are all standard options in android phones s system. menus. Rebooting nook may help too, and numerous times I've seen bad cables get in my way. Tip, just because a cable works with one device is not a guarantee it's working everywhere.
RE: STEP 6. "From windows, eject the nook to disconnect nook's file sharing."
Note:
1. The location of the eject menu is where you typically see "Safely remove hardware and eject media" in the windows taskbar.
2. After attempting to eject your Nook GLP, you may get a window that pops up that says "Windows can't stop [your device]" because a process is using it -- and you may not be able to track down which process is using it (for me, closing all windows and apps didn't help). If this is the case, hit "WINDOWS+X >> Shut down or Sign Out >> Sign out" -- then log back in. This *should* stop all processes and allow you to proceed to the next step (it did for me).
*My Nook GLP recently updated and I lost root. This also caused the startup animation to continue non-stop (but holding the power button and then selecting cancel from the options allowed me to select which launcher I wanted to use).
** Additionally, I had one other issue. My (windows) laptop wouldn't recognize my nook at all. Turns out it was the USB cable. So if you have that issue, try using a different USB cable -- preferably the one that came with your nook.
Missing epubs
So I followed the instructions, everything comes up great. I can sideload apps, I have a new launcher etc. But if I copy a file (epub or otherwise) into the NOOK folder on my PC and then browse to the NOOK folder using the file manager on the Nook reader, its empty. At first I thought it was an issue with the file manager, so I installed another one. Same thing.
When I load epubs into the NOOK folder and open the B&N launcher, it sees the books and adds them to my library. But for whatever reason I can not find where the epubs are using a file manager. I even tried using grep to search for the file I copied in adb shell but it doesn't come up with anything. Anyone know whats going on and how to fix it?
Never mind its under /storage/spsd/
mount: Operation not permitted
I get this error after typing in the mount -o ... command.
Any help apprecidated!
root file missing
Hey, @jptiger In the setup instructions the rootgl3.zip file is missing a link now... Does anyone have an active link to this file, or another working root process? I couldnt find one by searching online..
Misssing files
I rebooted my nook recently and it comes back up but when I got /storage/spsd/ its empty. When I attach my nook to my pc, I can see all my books. So I did the following:
Code:
adb shell
su
busybox find / -name "*.epub"
The only files that it shows are the sample epubs that come with the Nook. I am kind of stumped as to how the files show up when I browse the nook as a usb drive. But will not show up when browsing for them via the nook itself or adb. Any thoughts?
Heretic09 said:
I rebooted my nook recently and it comes back up but when I got /storage/spsd/ its empty. When I attach my nook to my pc, I can see all my books. So I did the following:
Code:
adb shell
su
busybox find / -name "*.epub"
The only files that it shows are the sample epubs that come with the Nook. I am kind of stumped as to how the files show up when I browse the nook as a usb drive. But will not show up when browsing for them via the nook itself or adb. Any thoughts?
Click to expand...
Click to collapse
It looks like the flash memory on the Nook maybe going bad. There was a bunch of .chk files in the hidden LOST folder. Reformatting it and copying the books back to the nook seems to have fixed the problem for now. I may have to invest in the Kobo Clara HD in the future.
andjosgra said:
Hey, @jptiger In the setup instructions the rootgl3.zip file is missing a link now... Does anyone have an active link to this file, or another working root process? I couldnt find one by searching online..
Click to expand...
Click to collapse
That's weird. I don't know why they took down the original attachment. I can't find it, but I've gotten the on from the NGP+ and modified it the way they did with the originals. It's attached to this post, give it a shot.
EDIT: I uploaded the version attached here to the OP, but with the original name. The two zips have the same contents.
Heretic09 said:
So I followed the instructions, everything comes up great. I can sideload apps, I have a new launcher etc. But if I copy a file (epub or otherwise) into the NOOK folder on my PC and then browse to the NOOK folder using the file manager on the Nook reader, its empty. At first I thought it was an issue with the file manager, so I installed another one. Same thing.
When I load epubs into the NOOK folder and open the B&N launcher, it sees the books and adds them to my library. But for whatever reason I can not find where the epubs are using a file manager. I even tried using grep to search for the file I copied in adb shell but it doesn't come up with anything. Anyone know whats going on and how to fix it?
Click to expand...
Click to collapse
adb can't access NOOK storage when it's still connected to PC. Eject the device under BNRV520 (should say "NOOK: (F" or similar), but do not disconnect. Then you can find files in both adb and later NOOK's file manager when you disconnect. (should be under /storage/spsd/)
Guide is great though. Thank you all so much! Fast and easy! (unlike making a B&N account)
btw, I had to run "adb shell su" instead of 'adb shell' -> 'su' to get su priviledge, so maybe try that.
what is the adb command to manually launch relaunchx? the launcher option stopped working, and i can't get it to run at all.
Happy to report that the excellent instructions work great on the new 7.8" Glowlight Plus that got released yesterday. Change the model number to BNRV700 in the rootnook.cmd file and you're good to go!