Database Users

[Q] S4 Bell 1337m wont boot after flash.

Hello all, so i've run into a little problem and after a few hours i cant figure out what i did wrong so i reach out for help
i rooted my device successfully with odin and instlal CWM.
booted into recover, wiped data/cache/system/data as the walk through told me
then install a cx rom from here
http://forum.xda-developers.com/show....php?t=2391142
now when i turn my device on it gose stright into downloading mode with "could not do normal boot" in the top right
can any1 tell me waht i did wrong or missed?
oh i can sitll get into recovery
thanks in advanced

BurnAll said:
Hello all, so i've run into a little problem and after a few hours i cant figure out what i did wrong so i reach out for help
i rooted my device successfully with odin and instlal CWM.
booted into recover, wiped data/cache/system/data as the walk through told me
then install a cx rom from here
http://forum.xda-developers.com/show....php?t=2391142
now when i turn my device on it gose stright into downloading mode with "could not do normal boot" in the top right
can any1 tell me waht i did wrong or missed?
oh i can sitll get into recovery
thanks in advanced
Click to expand...
Click to collapse
Did you check the MD5 before flashing? Are you absolutely sure the ROM your flashing is compatible with your device? Were you on the latest MF3 firmware before you started flashing?

agent929 said:
Did you check the MD5 before flashing? Are you absolutely sure the ROM your flashing is compatible with your device? Were you on the latest MF3 firmware before you started flashing?
Click to expand...
Click to collapse
no i did not check the firmware. i missed that very first line.. sigh, but i got my phone when s4's 1st came out dose that help?
and thats another thing thats confusing me, what rom/kernals are compatiable with this phone i've read a bunch of forums but alot of them appear to leave a list out of it.
the one i'm trying to do has my device listed
http://forum.xda-developers.com/showthread.php?t=2391142

BurnAll said:
no i did not check the firmware. i missed that very first line.. sigh, but i got my phone when s4's 1st came out dose that help?
and thats another thing thats confusing me, what rom/kernals are compatiable with this phone i've read a bunch of forums but alot of them appear to leave a list out of it.
the one i'm trying to do has my device listed
http://forum.xda-developers.com/showthread.php?t=2391142
Click to expand...
Click to collapse
heck at this point i'd be happy just to get it back to normal as its late and i need to sleep and work tomorrow

BurnAll said:
no i did not check the firmware. i missed that very first line.. sigh, but i got my phone when s4's 1st came out dose that help?
and thats another thing thats confusing me, what rom/kernals are compatiable with this phone i've read a bunch of forums but alot of them appear to leave a list out of it.
the one i'm trying to do has my device listed
http://forum.xda-developers.com/showthread.php?t=2391142
Click to expand...
Click to collapse
Anything that says i337 will work on your phone, given that the developer has it bug free (the US ATT Samsung Galaxy S4)

agent929 said:
Anything that says i337 will work on your phone, given that the developer has it bug free (the US ATT Samsung Galaxy S4)
Click to expand...
Click to collapse
okay so this should work i also put on kernal
http://forum.xda-developers.com/show...php?p=41675354
4.2.2 TW version.
but still saying could no do normal boot, while on downloading screen

BurnAll said:
okay so this should work i also put on kernal
http://forum.xda-developers.com/show...php?p=41675354
4.2.2 TW version.
but still saying could no do normal boot, while on downloading screen
Click to expand...
Click to collapse
It says page not found...get the dots out of your link

Did you use your carriers Kernel?

Hey I just noticed that your subject for this post says i337m. Can you confirm if you have a i337 or an i337m please? Thank you.

agent929 said:
Hey I just noticed that your subject for this post says i337m. Can you confirm if you have a i337 or an i337m please? Thank you.
Click to expand...
Click to collapse
i have the m

BurnAll said:
i have the m
Click to expand...
Click to collapse
it appears you have flashed an ATT rom for the i337 and not a Rom for the i337m -- you now have several options to restore your phone
1. flash the Loki'd fix to allow the kernel and rom you flashed to boot your phone or
2. flash a cutom kernel that does work with your phone such a Ktoonz kernel (read the install instructions, for your i337m you need the TMO version of his kernel) or
3 download the stock firmware package for your phone, I'd recommend MG1 either from a link on xda or from samMobile or Samsung updates and install using Odin -- this will completely reset you phone and then you can worry about root and custom recovery after
If you do decide to install fresh factory stock MG1 I can recommend using CF-root to root the i337m and then installing Philz Recovery rather than regular CWM as it installs more easily and plays nicer on the i337m in my experience.
Remember each phone is different but do not attempt to install ATT designed roms on your i337m unless you have the loki patch also on your SD card ready to flash also.
There are many great roms available that do fir the i337m and are specifically set up for our phone.
But first, let's get you out of the download loop. EIther of the 3 options above will do. Personally, I would recommend the Odin install of the stock MG1 firmware and start over with a factory reset and a clean phone.

agent929 said:
It says page not found...get the dots out of your link
Click to expand...
Click to collapse
sorry here it is.
another fella on bell said this one worked for him
http://forum.xda-developers.com/showthread.php?p=41675354

lgsshedden said:
it appears you have flashed an ATT rom for the i337 and not a Rom for the i337m -- you now have several options to restore your phone
1. flash the Loki'd fix to allow the kernel and rom you flashed to boot your phone or
2. flash a cutom kernel that does work with your phone such a Ktoonz kernel (read the install instructions, for your i337m you need the TMO version of his kernel) or
3 download the stock firmware package for your phone, I'd recommend MG1 either from a link on xda or from samMobile or Samsung updates and install using Odin -- this will completely reset you phone and then you can worry about root and custom recovery after
If you do decide to install fresh factory stock MG1 I can recommend using CF-root to root the i337m and then installing Philz Recovery rather than regular CWM as it installs more easily and plays nicer on the i337m in my experience.
Remember each phone is different but do not attempt to install ATT designed roms on your i337m unless you have the loki patch also on your SD card ready to flash also.
There are many great roms available that do fir the i337m and are specifically set up for our phone.
But first, let's get you out of the download loop. EIther of the 3 options above will do. Personally, I would recommend the Odin install of the stock MG1 firmware and start over with a factory reset and a clean phone.
Click to expand...
Click to collapse
okay thanks i'll try to restore it using odin with the MG1 and then give the philz a shot. i'll update u once i've done so.

CF root:
http://forum.xda-developers.com/showthread.php?t=2293800
Philz recovery
http://forum.xda-developers.com/showthread.php?t=2201860
Goldeneye Rom:
http://forum.xda-developers.com/showthread.php?t=2313469
stock rooted MG1 rom
http://forum.xda-developers.com/showthread.php?t=2375180
stock firmware download links:
http://forum.xda-developers.com/showthread.php?t=2269304

lgsshedden said:
CF root:
http://forum.xda-developers.com/showthread.php?t=2293800
Philz recovery
http://forum.xda-developers.com/showthread.php?t=2201860
Goldeneye Rom:
http://forum.xda-developers.com/showthread.php?t=2313469
stock rooted MG1 rom
http://forum.xda-developers.com/showthread.php?t=2375180
stock firmware download links:
http://forum.xda-developers.com/showthread.php?t=2269304
Click to expand...
Click to collapse
okay got it back to stock, now quick question for the philz do i flash the .tar with odin? or do something else with the .zip?

Its not the ROM that's incomparable its the kernal your using. Find one for a i337m then flash it immediately after you flash your ROM and see if it works.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
---------- Post added at 09:58 PM ---------- Previous post was at 09:58 PM ----------
Zip gets flashed in your recovery.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4

agent929 said:
Its not the ROM that's incomparable its the kernal your using. Find one for a i337m then flash it immediately after you flash your ROM and see if it works.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
---------- Post added at 09:58 PM ---------- Previous post was at 09:58 PM ----------
Zip gets flashed in your recovery.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
so just to go over the steps to make sure i dont mess this up,
so i flashed to the origonal versoin with odin
that worked
then i rooted it using CF root
now i got 2 files from philz and i'm not 100% sure what to do with them, i got a .tar what i assume i flash with odin and a .zip i'm not to sure what i do with they are both named philz_touch_5.15.0-jfltecan.tar.md5 and philz_touch_5.15.0-jfltecri.zip
then once i get into recovery i know how to flash roms, its just this whole kernal thing thats got me confused.

BurnAll said:
so just to go over the steps to make sure i dont mess this up,
so i flashed to the origonal versoin with odin
that worked
then i rooted it using CF root
now i got 2 files from philz and i'm not 100% sure what to do with them, i got a .tar what i assume i flash with odin and a .zip i'm not to sure what i do with they are both named philz_touch_5.15.0-jfltecan.tar.md5 and philz_touch_5.15.0-jfltecri.zip
then once i get into recovery i know how to flash roms, its just this whole kernal thing thats got me confused.
Click to expand...
Click to collapse
how the heck do i install this philz i boot into recovery and install the zip but i get like 4 red errors when i do it and i still dont have philz

BurnAll said:
how the heck do i install this philz i boot into recovery and install the zip but i get like 4 red errors when i do it and i still dont have philz
Click to expand...
Click to collapse
READ THIS FIRST:
MAKE SURE YOU DO NOT HAVE THE MF3 FIRMWARE ON YOUR S4. THAT IS THE MOST IMPORTANT THING TO DO RIGHT NOW. IF YOU DO, DO NOT ATTEMPT TO INSTALL A CUSTOM RECOVERY.
You don't have a custom recovery already that's why. Did casual not install TWRP for you? If not try installing Goo Manager from the app market and try installing TWRP that way. MAKE SURE THAT WHEN YOU INSTALL IT, IT SAYS YOUR MODEL NUMBER EXACTLY! I CAN NOT STRESS THIS ENOUGH! When you have TWRP installed, then flash philz with TWRP and you'll have that custom recovery instead.

BurnAll said:
how the heck do i install this philz i boot into recovery and install the zip but i get like 4 red errors when i do it and i still dont have philz
Click to expand...
Click to collapse
do not use the zip you quoted it is not for your phone
use odin flash the tar philz_touch_5.15.0-jfltecan.tar.md5
now you have stock updated MG1 firmware with the latest baseband
root by CF root
Philz Recovery
Now follow the next steps:
1. set up your google account play store etc.
2.next, go into the recovery and do a full nandroid backup -- this gives you a stable base you can restore when needed
3. go flash a custom rom, I highly recommend the latest version of Goldeneye -- updated, well maintained, great developer, clear install instructions
4. try itt then again, use recovery to make a 2nd nandroid, this one of your custom rom install -- try different kernels, every phone is different and someone's favorite kernel just may not like your phone -- doesn't make it a bad kernel just makes it the wrong one for your phone, flash a different one
5. theme if you want -- this is where your recoveries become important as themes are notorious for not always sitting well and all is ok if you have a backup you can return to
6. NEVER flash a baseband from another variant -- stick with your MG1 from your carrier until your carrier updates stock firmware

Philz Touch problem! Please help!

I updated my GS4 to rooted (without knox) 4.3 and now i want to flash Sacs Custom rom but i can't i've tried every recovery I could find none work for me even Philz, everyone is saying use that one and I did but when I flash it through odin nothing happens when I try to boot it to recovery the phone simply skips through and reboots( yes it does try to get into recover, the blue text) but if i keep trying it, it'll boot to stock recovery after 2-3 tries (assuming that's a fail safe?) I don't know what i'm doing wrong can anyone help?
Yes i have the drivers (Odin can do anything but get a recovery to stick)

bounddyy said:
I updated my GS4 to rooted (without knox) 4.3 and now i want to flash Sacs Custom rom but i can't i've tried every recovery I could find none work for me even Philz, everyone is saying use that one and I did but when I flash it through odin nothing happens when I try to boot it to recovery the phone simply skips through and reboots( yes it does try to get into recover, the blue text) but if i keep trying it, it'll boot to stock recovery after 2-3 tries (assuming that's a fail safe?) I don't know what i'm doing wrong can anyone help?
Yes i have the drivers (Odin can do anything but get a recovery to stick)
Click to expand...
Click to collapse
Run Odin 'as administrator' and make sure you're flashing the right .tar - philz_touch_5.18.2-jfltespr.tar.md5

leaderbuilder said:
Run Odin 'as administrator' and make sure you're flashing the right .tar - philz_touch_5.18.2-jfltespr.tar.md5
Click to expand...
Click to collapse
Yes i did those and is it possible to downgrade to mf9 and directly flash sacs custom v4 4.3?

bounddyy said:
Yes i did those and is it possible to downgrade to mf9 and directly flash sacs custom v4 4.3?
Click to expand...
Click to collapse
If you can get into recovery now (philz). You can certainly flash Sac's 4.3. If you want the mf9 modem that is in the dev section too. Check out Unknownforce's post
But I suspect you've taken the mja "firmware" and tripped that Knox counter, and if that's the case I dint believe you can Odin back to mf9.
Sent from my SPH-L720 using XDA Premium 4 mobile app

Well my rom was pre rooted and wasn't supposed to have Knox I'll try it and see but is it okay to flash to 4.3 v4 from mf9?
Sent from my SPH-L720 using xda app-developers app

bounddyy said:
Well my rom was pre rooted and wasn't supposed to have Knox I'll try it and see but is it okay to flash to 4.3 v4 from mf9?
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
well that didn't workout so i figured out that i shouldnt let my phone reboot after flashing Philz recovery and instead directly force into recovery and it worked but now i need to just flash it thourgh there lol

[Q] So many issues... (Kies, Recovery, Firmware)

Hello.First post here.
I currently have been using CM11 for a few months now but miss some features on stock. (multiwindow, air view) so I installed Sacs ROM.
Everything was working great today except a known problem is wifi will not work due to radio opbstructions (i believe). So i attempted to change the baseband to MF9.
At first, Odin started then immidately it failed. The error read 'Fused 4 Binary 1'
So i assumed it was a connection error. I loaded back into download mode and tried again. Failed.
At this point i thought screw it, and took the battery out. tried to reboot and stuck at the soft brick "Firmware upgrade encountered and issue. Please select recovery mode in Kies and try again"
I installed Kies. Plugged in my phone. Drivers installed but Kies will not connect. Try to do 'Firmware Upgrade and Initialization'
However Kies will NOT accpet my S/N number. i tried everything. writing it all out or with a space every 3 numbers or with 'DEC' at the front. nothing worked.
I even called sprint to double check S/N (ESN/DEC)
so basically I'm soft bricked and Kies is screwing me over. Any ideas?

Have you tried to odin back to stock?
Sent from my SPH-L720 using XDA Premium 4 mobile app

ROMANTiC KiD said:
Have you tried to odin back to stock?
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thats the one thing i want to avoid.
by reverting to stock wont i lose root access? i have a backup of my old CM ROM from before i flashed sacs. should i revert to stock then restore to CM then reinstall Sacs?

whatthe_fuzz said:
thats the one thing i want to avoid.
by reverting to stock wont i lose root access? i have a backup of my old CM ROM from before i flashed sacs. should i revert to stock then restore to CM then reinstall Sacs?
Click to expand...
Click to collapse
Yes but it takes all but about 30 seconds to root again
You could go straight to sacs after rooting.
Sent from my SPH-L720 using Tapatalk

daniel4653 said:
Yes but it takes all but about 30 seconds to root again
You could go straight to sacs after rooting.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
ok that might leave me with a cleaner install also.
wheres the stock file i can flash on Odin?
also how should i update the radio if it didnt work the first time?
Thank you for the help

whatthe_fuzz said:
ok that might leave me with a cleaner install also.
wheres the stock file i can flash on Odin?
also how should i update the radio if it didnt work the first time?
Thank you for the help
Click to expand...
Click to collapse
If you flash a full stock tar you won't have to flash radio.
Do a search please for the tar.
Sent from my SPH-L720 using XDA Premium 4 mobile app

leaderbuilder said:
If you flash a full stock tar you won't have to flash radio.
Do a search please for the tar.
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i searched around and eventually found a working .md5 file. its apparently is stock. got my phone to start booting but it got stuck at the yellow sprint screen. im going to try to boot into safe mode. any ideas how to access my recovery file? i have one form CWM and one from Ti Backup

which tar did you flash through Odin? MF9, MK2 or NAE?
IF you were on MF9 and flashed the full MF9 tar you can try and flash again. Just power off phone completely, go to download mode, attach and run Odin. (same for MK2 or NAE) BUT if you tried flashing MJA/MK2 or NAE you cannot go back to MF9. Things you should have read about already.
If it hangs on boot after flashing, power off completely, boot to stock recovery and do a factory reset and then let it restart first reboot can take 5 to 10 earth minutes.
You can then root via CF-Autoroot or Saferoot, install goomanager to grab a custom recovery (CWM or TWRP) OR Odin said recoveries (Philz, TWRP etc.)

leaderbuilder said:
which tar did you flash through Odin? MF9, MK2 or NAE?
IF you were on MF9 and flashed the full MF9 tar you can try and flash again. Just power off phone completely, go to download mode, attach and run Odin. (same for MK2 or NAE) BUT if you tried flashing MJA/MK2 or NAE you cannot go back to MF9. Things you should have read about already.
If it hangs on boot after flashing, power off completely, boot to stock recovery and do a factory reset and then let it restart first reboot can take 5 to 10 earth minutes.
You can then root via CF-Autoroot or Saferoot, install goomanager to grab a custom recovery (CWM or TWRP) OR Odin said recoveries (Philz, TWRP etc.)
Click to expand...
Click to collapse
I think i fixed it.
Problems resolved.
The issue was i had Sacs v4 which didnt support wifi and i read that it needed MF9 firmware.
i had a lapse in judgement and without thinking tried to go back from MJA. didnt catch it until now.
I eventually found the correct stock file. eventually got into the phone. rerooted and in the process of install the proper sacs ROM (v5.6)
this was a simple error that i shouldve caught thanks guys!
hopefully this ROM will work with wifi...
BTW, all my backups were wiped

Your backups weren't on your external sd? Ooo, that sucks. Glad you got it.
Sent from my SPH-L720 using XDA Premium 4 mobile app

bootlooping sucks.....

Ok so now I have a brand new S4. Came in the mail yesterday. So I rooted it. No problem...... went to add a custom rom. (Sacs custom rom to be exact) reboots ok. Galaxy S4 screen. Then the custom rom screen and it stays there........ phone gets extremely hot. I went into recovery. Wiped data. Wiped cache. Wiped dalvik cache. Nothing. So I says ok, forget it. I'm going to Just take the root off and go back to stock firmware. Odin fails to unroot every time. I get Fail (Auth). I downloaded the right tar files to unroot. I even deleted them and re downloaded them. Same results. I'm going crazy because I just got this phone and I can't use it. Any help on what I'm doing wrong? Mind you I've been rooting for years and I've never had this problem before. Also it's a newer S4 that has the Sprint Spark screen. Anything would help. Thanks

sonny82 said:
Ok so now I have a brand new S4. Came in the mail yesterday. So I rooted it. No problem...... went to add a custom rom. (Sacs custom rom to be exact) reboots ok. Galaxy S4 screen. Then the custom rom screen and it stays there........ phone gets extremely hot. I went into recovery. Wiped data. Wiped cache. Wiped dalvik cache. Nothing. So I says ok, forget it. I'm going to Just take the root off and go back to stock firmware. Odin fails to unroot every time. I get Fail (Auth). I downloaded the right tar files to unroot. I even deleted them and re downloaded them. Same results. I'm going crazy because I just got this phone and I can't use it. Any help on what I'm doing wrong? Mind you I've been rooting for years and I've never had this problem before. Also it's a newer S4 that has the Sprint Spark screen. Anything would help. Thanks
Click to expand...
Click to collapse
sph-l720t?? I've heard conflicting reports about compatibility with custom sph-l720 ROMs and spark capable sph-l720t. Best case scenario is you get it to boot, I doubt you will have working Spark functionality, however.
With the galaxy s4 TW custom ROMs you need to reboot recovery after doing your wipes and before flashing your ROM. Also, IIRC, it is best to boot to download mode from fully powered off (maybe even recovery, but I've never needed to do so).
It is also best to be on the newest custom recoveries, like twrp 2.7.0.1 and latest philz (6.25?? not sure on this one)
The steps should look like this.
1 - boot to recovery and do all your wipes.
2 - reboot recovery
3 - flash rom
3.1 wipe dalvik and cache
4 - Boot and let it settle, if you are stuck on the splash screen for longer than 10 minutes chances are it is not going to boot.
Holler back and let us know.

sonny82 said:
Ok so now I have a brand new S4. Came in the mail yesterday. So I rooted it. No problem...... went to add a custom rom. (Sacs custom rom to be exact) reboots ok. Galaxy S4 screen. Then the custom rom screen and it stays there........ phone gets extremely hot. I went into recovery. Wiped data. Wiped cache. Wiped dalvik cache. Nothing. So I says ok, forget it. I'm going to Just take the root off and go back to stock firmware. Odin fails to unroot every time. I get Fail (Auth). I downloaded the right tar files to unroot. I even deleted them and re downloaded them. Same results. I'm going crazy because I just got this phone and I can't use it. Any help on what I'm doing wrong? Mind you I've been rooting for years and I've never had this problem before. Also it's a newer S4 that has the Sprint Spark screen. Anything would help. Thanks
Click to expand...
Click to collapse
If Odin fails then you DID download the wrong tar file. Since you said you just got your phone then you need to know what version you have, there are 2: the L720 & the L720T. If your phone was brand new when you bought it than most likely it is the L720T and none of the roms on this site are compatible with your phone. Some of them will work but you will loose features or have to take extra steps to get the rom working. Once you know which phone you have, you will need to download the correct tar file. If you do have the L720 than the only tar file that will get your phone up and working is the full NAE tar. If you have the L720T then you will need the NC6 ful tar. Any older tar files will fail.

wilzard said:
sph-l720t?? I've heard conflicting reports about compatibility with custom sph-l720 ROMs and spark capable sph-l720t. Best case scenario is you get it to boot, I doubt you will have working Spark functionality, however.
With the galaxy s4 TW custom ROMs you need to reboot recovery after doing your wipes and before flashing your ROM. Also, IIRC, it is best to boot to download mode from fully powered off (maybe even recovery, but I've never needed to do so).
It is also best to be on the newest custom recoveries, like twrp 2.7.0.1 and latest philz (6.25?? not sure on this one)
The steps should look like this.
1 - boot to recovery and do all your wipes.
2 - reboot recovery
3 - flash rom
3.1 wipe dalvik and cache
4 - Boot and let it settle, if you are stuck on the splash screen for longer than 10 minutes chances are it is not going to boot.
Holler back and let us know.
Click to expand...
Click to collapse
it worked!!!!! you are the man!!!! thanks a lot!!!!!

cruise350 said:
If Odin fails then you DID download the wrong tar file. Since you said you just got your phone then you need to know what version you have, there are 2: the L720 & the L720T. If your phone was brand new when you bought it than most likely it is the L720T and none of the roms on this site are compatible with your phone. Some of them will work but you will loose features or have to take extra steps to get the rom working. Once you know which phone you have, you will need to download the correct tar file. If you do have the L720 than the only tar file that will get your phone up and working is the full NAE tar. If you have the L720T then you will need the NC6 ful tar. Any older tar files will fail.
Click to expand...
Click to collapse
cool so where would i find these new tar files?

cruise350 said:
If Odin fails then you DID download the wrong tar file. Since you said you just got your phone then you need to know what version you have, there are 2: the L720 & the L720T. If your phone was brand new when you bought it than most likely it is the L720T and none of the roms on this site are compatible with your phone. Some of them will work but you will loose features or have to take extra steps to get the rom working. Once you know which phone you have, you will need to download the correct tar file. If you do have the L720 than the only tar file that will get your phone up and working is the full NAE tar. If you have the L720T then you will need the NC6 ful tar. Any older tar files will fail.
Click to expand...
Click to collapse
im on L720. now this new NAE tar. will it put me back to stock firmware? because thats what i want to do. no rrot on this phone.

sonny82 said:
im on L720. now this new NAE tar. will it put me back to stock firmware? because thats what i want to do. no rrot on this phone.
Click to expand...
Click to collapse
You can download the NAE tar file from here: http://forum.xda-developers.com/showthread.php?t=2663619
You should use Odin 3.07 or 3.09 to install. Make sure you run Odin in administrator mode.

sonny82 said:
it worked!!!!! you are the man!!!! thanks a lot!!!!!
Click to expand...
Click to collapse
Awesome, dude. Very happy to hear that.

tar files
Where can I get the NC6 tar file. I have the SPH720T , I rooted it fine, then tried to get the native tether to work and now my phone starts up and then gets stuck on the Sprint Sparks screen, I've tried 4 different tar files and all fail. I'm using Odin 3.9

Problems with ODIN'ing stock recovery

I am currently on the unlocked MDL bootloader, and I am running KANGAKAT 7.0, which is a KitKat 4.4 ROM. My phone is also encrypted, which means that I cannot flash updates due to CWM/TWRP not supporting encryption.
The solution proposed by other users has been to ODIN the stock MK2 recovery onto my phone, use the stock recovery to factory reset my device, then re-flash TWRP and then my new ROM.
However I'm having a problem with these steps. I am able to successfully ODIN the stock MK2 recovery to my device, however whenever I try to boot into recovery, I get the yellow triangle screen stating that I'm running software that is not authorized by AT&T, and stating something to do with my kernel in the top left of the screen.
Is there a step that I am missing? I followed the instructions @ http://forum.xda-developers.com/showthread.php?t=1506697

It looks like that file is for the s2 skyrocket, not the s4. You'll probably have to flash the complete mdl firmware in Odin
Edit, if you're still rooted try flashing twrp 2.8.3.0 image file in flashify from the play store. http://techerrata.com/browse/twrp2/jflteatt
Sent from my Nexus 9 using XDA Free mobile app

jd1639 said:
It looks like that file is for the s2 skyrocket, not the s4. You'll probably have to flash the complete mdl firmware in Odin
Edit, if you're still rooted try flashing twrp 2.8.3.0 image file in flashify from the play store. http://techerrata.com/browse/twrp2/jflteatt
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah, they're instructions for the S2 Skyrocket, but I just used the general procedure and not the file, I used the stock recovery listed here http://forum.xda-developers.com/showpost.php?p=49687791&postcount=3
You make an interesting point though, if I ODIN the entire stock MDL ROM, that could work. I'm just going to write over it with another ROM anyways, so what I restore to shouldn't matter. I know this is probably a dumb question, but flashing the stock MDL ROM isn't going to affect my MDL bootloader is it?
I can get TWRP 2.8.3.0 with or without Flashify, but that app is very convenient, thank you for the tip =)

ChrisG683 said:
Yeah, they're instructions for the S2 Skyrocket, but I just used the general procedure and not the file, I used the stock recovery listed here http://forum.xda-developers.com/showpost.php?p=49687791&postcount=3
You make an interesting point though, if I ODIN the entire stock MDL ROM, that could work. I'm just going to write over it with another ROM anyways, so what I restore to shouldn't matter. I know this is probably a dumb question, but flashing the stock MDL ROM isn't going to affect my MDL bootloader is it?
I can get TWRP 2.8.3.0 with or without Flashify, but that app is very convenient, thank you for the tip =)
Click to expand...
Click to collapse
Flashing the mdl firmware in Odin will still give you the mdl bootloader. But it'll want to update after you flash so flash another custom rom or freeze the update files before it does so.
Sent from my Nexus 5 using XDA Free mobile app

@ChrisG683 Be sure to turn your wi-fi off and remove your SIM card, that way it can't update. You can put any apps you think you might need on an SD card and install them without having to go to the play store. Once you get things frozen or removed then you'll be good to go. :good:

Thanks guys, I'll be sure to keep that in mind once I get things sorted out.
The newest thing I've figured out is that the MDL stock recovery does not give me the "yellow triangle" error, and it presents me with the option to wipe my device. (I grabbed it from here http://forum.xda-developers.com/showthread.php?t=2429406)
Now I'm just making sure I have a stock MDL ROM ready to ODIN in case I screw up my device =). Hopefully this all works out.
Edit:
Looks like everything went beautifully. The MDL stock recovery wiped my /data partition perfectly, and I was able to reboot into a fresh and clean copy of KANGAKAT 6.0. Then I was able to use a terminal to flash TWRP, did a factory reset, flashed KANGAPOP 1.4, and now you can add me to the list of proud Lollipop users =)