Database Users

[Q] Messed up the format of Internal Memory of Nook Color!!! Plz help!!!!

Hello xda experts!!!!! I really need some help!!! The thing is like this : I have installed cm10 alpha 1 for nook on sd card!!! While i was installing it my nook color was also connected to the computer. So in WinImage i accidently chose the 1 gb of nook color instead of the 32 gb sandisk class 10 which i had inserted in pc via card reader. So it began writing on nook color's internal 1 gb memory. More to that, I interrupted this procedure and performed full format in minitool partition manager. i didnt knew the format of internal memory of nook color so i chose fat32 formatting style. But when i rebooted nook color after disconnecting it kept on showing message that system has encountered some issue and it requires the system to restart.But even after reboot the same error kept on showing up!!!!! And since yesterday the stock b&n OS has stopped working completely!!! Doesnt even show the error which it previously used to show!!! Plz resolve this error and help ASAP!!!!!!!!!!!!!!!

Use my partition repair zips in my emmc partition repair thread linked in my signature. Flash with my bootable CWM SD in my tips thread also linked in my signature. Then you can reflash stock back to emmc as also explained in my tips thread.

leapinlar said:
Use my partition repair zips in my emmc partition repair thread linked in my signature. Flash with my bootable CWM SD in my tips thread also linked in my signature. Then you can reflash stock back to emmc as also explained in my tips thread.
Click to expand...
Click to collapse
But now it has just black screen!! Not even a flick of light!!! Just plain lback as if the device is dead!!! I kept it with ac charger for over 2 hrs with a hope of its resurrection but no yield!!!! And how shall i decide which partition has corrupted!!!
I tried eyeballers cwm sd bootable img but no yield!!!! The screnn is just plain black!!!

AamirShamma said:
But now it has just black screen!! Not even a flick of light!!! Just plain lback as if the device is dead!!! I kept it with ac charger for over 2 hrs with a hope of its resurrection but no yield!!!! And how shall i decide which partition has corrupted!!!
I tried eyeballers cwm sd bootable img but no yield!!!! The screnn is just plain black!!!
Click to expand...
Click to collapse
You need to use my CWM bootable SD. It has been modified to boot in bootloop situations. You can get it on my tips thread linked in my signature.

leapinlar said:
You need to use my CWM bootable SD. It has been modified to boot in bootloop situations. You can get it on my tips thread linked in my signature.
Click to expand...
Click to collapse
I dont know how but its on again !!! I think the device was hanged badly and when it was dicharged completely then it booted back up!!! However i still get system error in barnes and noble nook OS while cm10 is running like butter!!!
I still dont get it whether my partitions have been damaged in the nook OS. Beacause i had just formatted the 1gb of data which we get in nook and have nothing to do with partitions!!! However thanx leapinlar!!! You rock!!! Yur contribution in xda is noteworthy!!! Keep up the good work!!!::good:

Bricked while installing TWRP
Hi guys,
sorry to warm up this thread, but I think I have a similar Problem. I was running CMW with CM10.1 and I tried to install TWRP using the manager app, bit I think I chose the wrong model and now I am stuck with a loop of the nook logo at the beginning. I cant even boot from sd card or anything. Does somebody have an idea how to fix this?
Cheers!

chrizzl111 said:
Hi guys,
sorry to warm up this thread, but I think I have a similar Problem. I was running CMW with CM10.1 and I tried to install TWRP using the manager app, bit I think I chose the wrong model and now I am stuck with a loop of the nook logo at the beginning. I cant even boot from sd card or anything. Does somebody have an idea how to fix this?
Cheers!
Click to expand...
Click to collapse
You probably messed up you partitions. Go to my NC partition repair thread linked in my signature. But you will somehow have to get the NC to boot to SD. Also make sure you really have a Color instead of a Nook Tablet. Colors have a black bezel and Tablets have a grey one.
Sent from my SM-T707V using XDA Premium HD app

leapinlar said:
You probably messed up you partitions. Go to my NC partition repair thread linked in my signature. But you will somehow have to get the NC to boot to SD. Also make sure you really have a Color instead of a Nook Tablet. Colors have a black bezel and Tablets have a grey one.
Sent from my SM-T707V using XDA Premium HD app
Click to expand...
Click to collapse
Thx leapinlar,
infact I do have an Nook HD+. Problem is I cant get it to boot from SD. I already tried the HD+ bootable CMW-Images u posted in ur other thread, however it never gets out of the nook-logo loop. It seems like the partitions are so messed up that it cant boot from sd... could one somehow solve this by connection the thing to a pc?
Cheers!

chrizzl111 said:
Thx leapinlar,
infact I do have an Nook HD+. Problem is I cant get it to boot from SD. I already tried the HD+ bootable CMW-Images u posted in ur other thread, however it never gets out of the nook-logo loop. It seems like the partitions are so messed up that it cant boot from sd... could one somehow solve this by connection the thing to a pc?
Cheers!
Click to expand...
Click to collapse
I don't have a partition repair for the hd+. Why are you posting this in the Nook Color forum? The hd+ do brick easily.
Sent from my SM-T707V using XDA Premium HD app

[Q] Recovery Problem NC Color!

My system started as a 1.3 NC, that I successfully rooted using nooter, but a year ago last Oct ( 2011 ) and OTA update removed my rooting. After a couple weeks, someone posted a "fix" that restored my root access, but also bocked the OTA update.
A few weeks ago, I screwed up and mistakenly tried to install a Android Market update, and it BROKE my system. So I desided that this was a great time to update the NC to it's current OS level ( 1.4.3 ) and tried to follow the instructions on restoring the NC to "factory" fresh state... but thats where it started to go wrong!
Using the clockwork recovery sdcard I used to root the system, it FAILED to erace / format the Data area, probubly because I "fixed" it when I had the problem over a year ago with the OTA update.
Now no matter who's instructions I follow, I can't get that data section deleted so I can restore the system,
What I want to do restore/update the NC to current level, and THEN to reroot.
Currenly, the ONLY way I can use the NC is with the newest N2A image on a sdcard, but there is a huge speed penalty that way!
Can ANYONE help!
Thanks in Advance!
Tom

Yes, I can help. Go to my NC tips thread linked in my signature and make a bootable CWM SD per item A10. Then go to my item A15 and download the CWM flashable 1.4.3 and install per the directions there, wiping also per the directions.
Sent from my Nook HD+ running CM10.1 on Hybrid SD

now hanging on "n" screen
leapinlar said:
Yes, I can help. Go to my NC tips thread linked in my signature and make a bootable CWM SD per item A10. Then go to my item A15 and download the CWM flashable 1.4.3 and install per the directions there, wiping also per the directions.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
Click to expand...
Click to collapse
Thanks for the help... so far!
Did as suggested, created the card ( CWM-6.0.1.2-bootable_SD ) and loaded the "nookcolor_1_4_3_signed.zip" onto it.
Was successful in formatting the system , boot and cashe AND the Data directory! Restarted CWM and was able to run the 1.4.3 zip completely. Rebooted from CWM menu after removing the SD card from the NC....
...but now the NC hangs at the "N" screen.
So, what did I do wrong? What next?
Thanks in advance!
Tom

tomsheeley said:
Thanks for the help... so far!
Did as suggested, created the card ( CWM-6.0.1.2-bootable_SD ) and loaded the "nookcolor_1_4_3_signed.zip" onto it.
Was successful in formatting the system , boot and cashe AND the Data directory! Restarted CWM and was able to run the 1.4.3 zip completely. Rebooted from CWM menu after removing the SD card from the NC....
...but now the NC hangs at the "N" screen.
So, what did I do wrong? What next?
Thanks in advance!
Tom
Click to expand...
Click to collapse
How did you format, using CWM or my format zip? You need to use my format zip. And NEVER format boot!
Sent from my Nook HD+ running CM10 on SD

ok... so how do I FIX that?
leapinlar said:
How did you format, using CWM or my format zip? You need to use my format zip. And NEVER format boot!
Sent from my Nook HD+ running CM10 on SD[/QUOTE
I used the CWM for the format,
How do I fix what I screwed up? Please?
Tom
Click to expand...
Click to collapse

tomsheeley said:
leapinlar said:
How did you format, using CWM or my format zip? You need to use my format zip. And NEVER format boot!
Sent from my Nook HD+ running CM10 on SD[/QUOTE
I used the CWM for the format,
How do I fix what I screwed up? Please?
Tom
Click to expand...
Click to collapse
Just use my format zip that I talked about in item A15 of my tips thread. That should fix it.
Sent from my stock Nook HD+ using XDA Premium
Click to expand...
Click to collapse

works... but one last question
First off... a HUGE Thank You!
It looks like it's back to my pre-rooted NC.... so, if I understand this correcly, it's NOT rooted, and I still have to do that.
Any suggestions of the best rooting utility?
Again, thank your for all your help!
Tom

tomsheeley said:
First off... a HUGE Thank You!
It looks like it's back to my pre-rooted NC.... so, if I understand this correcly, it's NOT rooted, and I still have to do that.
Any suggestions of the best rooting utility?
Again, thank your for all your help!
Tom
Click to expand...
Click to collapse
Root the stock with Manual Nooter 5.08.20.
Sent from my Nook HD running CM10.1 on SD

Twrp 2.4.1.0
leapinlar said:
Root the stock with Manual Nooter 5.08.20.
Sent from my Nook HD running CM10.1 on SD
Click to expand...
Click to collapse
Hi leapinlar and tomsheeley,
Due to 10 posts rule I cannot reply to eyeballer's thread (I'll send him a pm instead). tomsheeley might try TWRP 2.3.1.0 after he root his NC as more friendly. Today I tried to upgrade to TWRP 2.4.1.0 available in #129 post. The problem I had with fixing permissions was solved by deleting the folder emmc/TWRP using a root explorer (I use Root Browser Lite free from market).
The problem is common I think with SGS+ and I found it by watching this thread.
Thanks and sorry for posting here but watching that you are posting in fattire's thread and I think my feedback might helps.

Hard Bricked...... in a wierd way.

So guys i have bricked my nook. Doesn't turn on or anything no screen flashing or anything. if anyone could help me on this i would appreciate it.
Well i was on cm 10 and 10.1 for a while and i finally decided to try other roms. i installed every rom on my internal so not my sd card. (my sd is 32 gig sandisk class 10 ultra). so i updated my recovery to flash more roms and when i did cwm didnt read all my backups. cwm only read my cm7 backup and cm10 backup. (using clockwork recovery). So first i installed SCHIZOID p.a.c. rom. But on that rom everytime i wanted to boot up i would have to full wipe + reflash rom without it getting into a bootloop. Then i tried Mirage's cm7.2 rom. When i flashed that rom, the loading bar in cwm would get too about 3 quarters and BAM! My nook would turn off and only load the bootloader. so from the bootloader i opened up cwm recovery and went straight to my backup, and apparently, dumbass cwm says theres no boot.img or system.img and data.img....etc in my cm7 backup. so i went to my cm10 backup and that said md5 mismatch. WTF??? So i tried to reflash Mirage's cm7.2 rom and BAM! same thing happen, but about 7/8ths of the bar was filled before it force shut down by itself. But this time i cant access the bootloader and i have it ultimateley hard bricked.
so please if anyone has any un-hard brick or jtag repair threads or anything i would appreciate it. And would a bootable sd fix this? the screen wont turn on/flash or anything so im not sure if it will load the sd card
Edit: I've found out that plugging the nook to my computer and holding the power button for 20+ seconds makes my computer make a sound that my windows machine recognizes the nook but then it quickly makes another sound and my computer doesn't recognize/thinks the nooks disconnected

Leapinlar has an excellent guide.
http://forum.xda-developers.com/showthread.php?t=1621301

gravitysandwich said:
So guys i have bricked my nook. Doesn't turn on or anything no screen flashing or anything. if anyone could help me on this i would appreciate it.
Edit: I've found out that plugging the nook to my computer and holding the power button for 20+ seconds makes my computer make a sound that my windows machine recognizes the nook but then it quickly makes another sound and my computer doesn't recognize/thinks the nooks disconnected
Click to expand...
Click to collapse
The reason it appears to not turn on is your boot files in the boot partition are corrupt.
The way the NC boots is it turns on without the screen on and looks for valid boot files first in the SD and then in the internal boot partition. If it finds some, it turns the screen on and continues the boot. If it finds none, it immediately turn off without ever turning the screen on. That Windows beep is the short turn on/turn off sequence.
So the solution is to make a bootable CWM SD per the thread the last user referenced and boot to that. Then you can flash a valid ROM and it should repair itself. If it does not successfully flash a ROM then go to my partition repair thread linked in my signature and follow instructions there.
Sent from my Nook HD+ running CM10.1 on emmc.

Can't get to a computer now. But when I do I'll try. If anything I'll pm you.
Sent from my Nexus 4 using xda premium

gravitysandwich said:
Can't get to a computer now. But when I do I'll try. If anything I'll pm you.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Do it on the forum. I don't respond to PMs.
Sent from my Nook HD+ running CM10 on Hybrid SD

leapinlar said:
Do it on the forum. I don't respond to PMs.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Ok
Sent from my Nexus 4 using xda premium

leapinlar said:
The reason it appears to not turn on is your boot files in the boot partition are corrupt.
The way the NC boots is it turns on without the screen on and looks for valid boot files first in the SD and then in the internal boot partition. If it finds some, it turns the screen on and continues the boot. If it finds none, it immediately turn off without ever turning the screen on. That Windows beep is the short turn on/turn off sequence.
So the solution is to make a bootable CWM SD per the thread the last user referenced and boot to that. Then you can flash a valid ROM and it should repair itself. If it does not successfully flash a ROM then go to my partition repair thread linked in my signature and follow instructions there.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
how do i boot into cwm? I get a explanation mark in a triangle in a nook saying that it needs to connect to power, I did let it charge and tried holding the power button + nook key + volume up to boot into and when it does i get the sign that says i need to connect to power. Once charged, would it boot me into cyanoboot, and then from there go to cm? (I'm using slow charge since I lost the nook charging kit so I use the nexus 4 or samsung galaxy s2 t989 charger). and I put my cm10.1 may 31st rom on the sd card + gapps, so when I do boot in cwm, can I access it and flash it?
edit:nvm got cwm working. But u cant flash a rom.
I wipe everything (data, cache, system,dalvik) and then when i hit chose zip from sdcard it says:
Finding update package...
Opening update package...
Installing update...
set_perm: some changes failed
E:Error in /sdcard/cm-10.1-20130531-nightly-encore.zip
(status 7)
Installation aborted.

Nevermind i got it working. i have to unmount every partion + turn on 'toggle signature verification' Thank You leapinlar.

cant even boot to bootable sd
leapinlar said:
The reason it appears to not turn on is your boot files in the boot partition are corrupt.
The way the NC boots is it turns on without the screen on and looks for valid boot files first in the SD and then in the internal boot partition. If it finds some, it turns the screen on and continues the boot. If it finds none, it immediately turn off without ever turning the screen on. That Windows beep is the short turn on/turn off sequence.
So the solution is to make a bootable CWM SD per the thread the last user referenced and boot to that. Then you can flash a valid ROM and it should repair itself. If it does not successfully flash a ROM then go to my partition repair thread linked in my signature and follow instructions there.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Im hoping that you might be able to help me out here. I can not even get the NC to start up with the bootable sd. Am I completely bricked? Ive also tried the partition repair youve referenced to no avail.
edit: Tried eyeballer image and was able to get into recovery but not able to mount any /cache or the sd card to try and install new rom. Any suggestions are greatly appreciated!

tomudei said:
Im hoping that you might be able to help me out here. I can not even get the NC to start up with the bootable sd. Am I completely bricked? Ive also tried the partition repair youve referenced to no avail.
Click to expand...
Click to collapse
How did you try the partition repair if you can't get the bootable SD to boot?
It is very difficult to make a bootable CWM SD that will actually boot in the Nook Color. Look at my NC Tips thread linked in my signature at item A9.
It is likely not bricked, just in need of repair. Make sure you have it charged and follow the steps in A9.
Sent from my Nook HD+ running CM10.1 on New SD

thanks
leapinlar said:
How did you try the partition repair if you can't get the bootable SD to boot?
It is very difficult to make a bootable CWM SD that will actually boot in the Nook Color. Look at my NC Tips thread linked in my signature at item A9.
It is likely not bricked, just in need of repair. Make sure you have it charged and follow the steps in A9.
Sent from my Nook HD+ running CM10.1 on New SD
Click to expand...
Click to collapse
Thanks, going to try now! Now that you've said it, I obviously hadn't tried the partition repair but thought that I had. Do you have a suggestion for which partition to fix? Fingers Crossed!

Sad
Sent from my GT-S7562 using xda premium

heartthrob.harsh said:
Sad
Click to expand...
Click to collapse
I know, but Ive been reading and trying soo many things that its starting to addle my brains!
---------- Post added at 10:08 PM ---------- Previous post was at 09:51 PM ----------
leapinlar said:
How did you try the partition repair if you can't get the bootable SD to boot?
It is very difficult to make a bootable CWM SD that will actually boot in the Nook Color. Look at my NC Tips thread linked in my signature at item A9.
It is likely not bricked, just in need of repair. Make sure you have it charged and follow the steps in A9.
Sent from my Nook HD+ running CM10.1 on New SD
Click to expand...
Click to collapse
Tried both of your cwm bootable sd's and I am unable to get either booted. Also, when plugging into pc, get the malfunction error you talked about in one of your tips. I really appreciate your help, any other advice that I might be able to try?

tomudei said:
I know, but Ive been reading and trying soo many things that its starting to addle my brains!
---------- Post added at 10:08 PM ---------- Previous post was at 09:51 PM ----------
Tried both of your cwm bootable sd's and I am unable to get either booted. Also, when plugging into pc, get the malfunction error you talked about in one of your tips. I really appreciate your help, any other advice that I might be able to try?
Click to expand...
Click to collapse
Only what I have in that A9 item about different things to try to make it bootable, like using an external USB card order, etc.
Sent from my Nook HD+ running CM10.1 on New SD

leapinlar said:
Only what I have in that A9 item about different things to try to make it bootable, like using an external USB card order, etc.
Sent from my Nook HD+ running CM10.1 on New SD
Click to expand...
Click to collapse
Thanks! Ive been using win32diskimager, perhaps i'll try winimage. I'm not really understanding why eyeballer cwm would work but not yours. Weird. Thanks again!

tomudei said:
Thanks! Ive been using win32diskimager, perhaps i'll try winimage. I'm not really understanding why eyeballer cwm would work but not yours. Weird. Thanks again!
Click to expand...
Click to collapse
Eyeballer CWM is working? Use that.
Sent from my Nook HD+ running CM10.1 on New SD

leapinlar said:
Eyeballer CWM is working? Use that.
Sent from my Nook HD+ running CM10.1 on New SD
Click to expand...
Click to collapse
Well I can get into cwm with eyeballer but it gives me an error stating that it can not mount /cache and it will not mount the sd so that I can't flash any .zip files

tomudei said:
Well I can get into cwm with eyeballer but it gives me an error stating that it can not mount /cache and it will not mount the sd so that I can't flash any .zip files
Click to expand...
Click to collapse
Aren't you the one I was helping in another thread sometime back? Did you try the trick of using your PC to copy the uImage and uRamdisk files from my SD to eyeballer's and try booting that?
Sent from my Nook HD+ running CM10.1 on New SD

leapinlar said:
Aren't you the one I was helping in another thread sometime back? Did you try the trick of using your PC to copy the uImage and uRamdisk files from my SD to eyeballer's and try booting that?
Sent from my Nook HD+ running CM10.1 on New SD
Click to expand...
Click to collapse
Nope, not me. New to the NC (have rooted my htc and samsung phones though so not a total noob..lol). I will try what you've suggested. Perhaps some background is needed. I had my NC running smoothly with cyanogenmod 10.1 nightly. Tried updating to RC3 and during flash the screen went black and Im here now trying anything I can.
---------- Post added at 10:50 PM ---------- Previous post was at 10:37 PM ----------
tomudei said:
Nope, not me. New to the NC (have rooted my htc and samsung phones though so not a total noob..lol). I will try what you've suggested. Perhaps some background is needed. I had my NC running smoothly with cyanogenmod 10.1 nightly. Tried updating to RC3 and during flash the screen went black and Im here now trying anything I can.
Click to expand...
Click to collapse
I have tried your suggestion of replacing the uimage and uram into eyeballers. its stuck on the startup screen saying "loading" with his two skulls.

tomudei said:
Nope, not me. New to the NC (have rooted my htc and samsung phones though so not a total noob..lol). I will try what you've suggested. Perhaps some background is needed. I had my NC running smoothly with cyanogenmod 10.1 nightly. Tried updating to RC3 and during flash the screen went black and Im here now trying anything I can.
---------- Post added at 10:50 PM ---------- Previous post was at 10:37 PM ----------
I have tried your suggestion of replacing the uimage and uram into eyeballers. its stuck on the startup screen saying "loading" with his two skulls.
Click to expand...
Click to collapse
Try copying all my files to his SD, replacing his.
Sent from my Nook HD+ running CM10 on Hybrid SD

problem to reboot to recovery

I have followed this guide to install cm10.1 emmc http://forum.xda-developers.com/showthread.php?t=2317500
however whenever I tried to reboot to recovery, the first time it still reboots normally. the second time it will reboot to the recovery. I am using cwm6.0.5.2.
anyone know what the issue and how to fix it?
thanks

henry8668 said:
I have followed this guide to install cm10.1 emmc http://forum.xda-developers.com/showthread.php?t=2317500
however whenever I tried to reboot to recovery, the first time it still reboots normally. the second time it will reboot to the recovery. I am using cwm6.0.5.2.
anyone know what the issue and how to fix it?
thanks
Click to expand...
Click to collapse
Where did you get 6.0.5.2? It should be 6.0.3.2. And which device are you running? How are you choosing to boot to recovery?
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
Where did you get 6.0.5.2? It should be 6.0.3.2. And which device are you running? How are you choosing to boot to recovery?
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
yes it should be 6.0.3.2.
nook hd+ 32GB
I boot from the power button->reboot->recovery
tried 3 times, all the same results(has to reboot twice).
thanks

henry8668 said:
yes it should be 6.0.3.2.
nook hd+ 32GB
I boot from the power button->reboot->recovery
tried 3 times, all the same results(has to reboot twice).
thanks
Click to expand...
Click to collapse
Hmm, that is strange. Mine reboots the first time to CWM. What version of the ROM are you running?
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
Hmm, that is strange. Mine reboots the first time to CWM. What version of the ROM are you running?
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
6/15 one updated this morning.

henry8668 said:
6/15 one updated this morning.
Click to expand...
Click to collapse
If it keeps doing that, you might want to report it as a bug in verygreen's emmc thread to see if others have the issue.
Sent from my Nook HD+ running CM10.1 on emmc.

[Q] NookColor From CM7 - CM10

Can I just download the CM10 Zip and Gapps to my SD card and flash from recovery? Or do I really need to format a SD card extract then burn image onto card etc....?

IFLATLINEI said:
Can I just download the CM10 Zip and Gapps to my SD card and flash from recovery? Or do I really need to format a SD card extract then burn image onto card etc....?
Click to expand...
Click to collapse
Do you already have CWM on internal memory? If so, you can use it to flash both CM10.1 and gapps. You can try doing it without factory reseting CM7 first. If it runs ok, leave it, but if you start having force closings, etc, do a factory reset later. No need to reflash.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
Do you already have CWM on internal memory? If so, you can use it to flash both CM10.1 and gapps. You can try doing it without factory reseting CM7 first. If it runs ok, leave it, but if you start having force closings, etc, do a factory reset later. No need to reflash.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Ahhhh yeah I couldnt wait any longer. Formatted a card, burned image, and flashed. No big deal. It was quicker than I remembered. But its good to know going forward I can just download right to my Nook and flash with recovery ( Yeah I have it installed ).
Running very nice right now. I mainly use this to watch Netflix before bed and found the Netflix 1.8.1. Apk to work great. Plays better and looks better than it did on my CM7 install. Im just blown away by how well this runs. I wasnt expecting this.