I need some help. I have a sprint s4 on mf9 and the single reason I wanted to root and mod my phone was for free hotspot. I used to pay the $20/ month for 2gbs and had that discontinued last week right before I rooted.
first I tried motochopper, didn't work. Then I rooted and tried crwrj's mf9 hotspot mod, didn't work. Then I installed negalite using cwm, didn't work. Finally I installed triforce and still no luck. I have wiped the cache and davlik before each rom install. I should clarify, when I say hotspot doesn't work, I mean when I hit the hotspot toggle in system settings it just says that my carrier has not authorized me. Generic message.
I am a noob to rooting as of last week so I'm sure I could be doing something wrong. Is there any suggestions that you could give me as to what I can do to get the hotspot to work? Any help would be appreciated!
btw, both roms install beautifully and successfully and are working great its just the hotspot feature that won't work!
system info if it helps. ..
Root using the cf auto root method, chainfire with PC Odin. Then grab the PC Odin tar of oudhs recovery. Then boot into recovery and flash the mf9 hotspot mod zip. That way has always worked for me. I'm on the phone so I can't easily get you links. Cfroot is in the original development section, not the custom roms. Both oudhs recovery and mf9 are in the custom development section. I can't remember if that is what the sections are actually called at the moment.
oscarthegrouch said:
Root using the cf auto root method, chainfire with PC Odin. Then grab the PC Odin tar of oudhs recovery. Then boot into recovery and flash the mf9 hotspot mod zip. That way has always worked for me. I'm on the phone so I can't easily get you links. Cfroot is in the original development section, not the custom roms. Both oudhs recovery and mf9 are in the custom development section. I can't remember if that is what the sections are actually called at the moment.
Click to expand...
Click to collapse
oscar,
thanks for sharing, I did root my s4 using the cf root method and odin and then installed the mf9 hotsopt mod in recovery mode. You're losing me when you say to get the tar file from oudhs in recovery - I don't know if I missed that step or what I'm supposed to do there... I'm a noob!
btw, what about the triforce and negalite roms I installed -shouldn't the hotspot work out of the box once installed?
In the regular development section, there is a oudhs recovery thread. In there, you'll find a zip and a tar. The tar is meant to be flashed in PC Odin. When you fire up Odin, put the tar in the PDA slot and flash. Let the phone boot completely between flashes so things can settle and get set up correctly. Any confusions, let me know and I'll clarify further.
I assume you know the difference between download mode and recovery mode on the phone. Root and recovery are done in download mode. The hotspot flash is done in oudhs recovery mode. If this is the first time you are putting oudhs on the phone, when you reboot in the menu selection, it might say something about fixing recovery because the phone wants to flash stock recovery after the reboot. Allow oudhs to fix that. It's not hard, just take your time and read what's going on. If the screen, in oudhs recovery is too twitchy, you can still use volume up and down to navigate and power to select. You'll do fine. Just don't get ahead of yourself. If you're confused then stop and look online for an answer. You'll flash everything in Odin in the PDA slot and make sure the only check box that is checked is reboot phone. Don't move the phone or computer or cable while flashing. An intermittent connection when flashing could be disastrous.
Just to let you know, you can use any custom recovery. TWRP works great also and you can load that through the goomanager app from the play store if you want to simplify things.
I don't remember if that recovery was, but one of the other ones, people were saying they were having problems with it. Some recent update made it unstable in some way.
I had to unroot and go all the way back to MDC. I made sure that each up update settled for at least an hour. When up to MF9, used Odin method for root then root explorer for the mod. The important thing is to make sure that the hot spot toggle is still there after each OTA update. I had to do it twice when I lost the toggle between MDL and MF9.
Sent from my Nexus 7 using xda app-developers app
Related
I've been reading the 4.3 release thread in the "general" forum, and the other relevant threads over there, and am confused after reading thru' 50+ pages of experiences...
I'm on the stock MF9 ROM, rooted, with hotspot mod installed, and camera shutter sound disabled in xml file), and TWRP custom recovery.
I'd like to get to MJA, rooted, with hotspot mod installed, and TWRP custom recovery. (if possible, I'd like to get there without tripping the KNOX counter, but if that is not possible, so be it)
From what I've read, it looks like I need to
Nandroid backup (optional)
Install stock MF9 tar file using ODIN (recovery, ROM, Modem, kernel) - http://forum.xda-developers.com/showthread.php?t=2485502
Take OTA (or use update file from google server link on http://forum.xda-developers.com/showthread.php?t=2504349)
Reboot (Don't install any apps at this time)
Use CF Auto to root using ODIN - http://forum.xda-developers.com/showpost.php?p=41743640&postcount=3
Factory reset just in case
Install goo manager, and flash custom recovery TWRP
Reboot
Reinstall apps
Install new MJA odexed hotspot mod http://forum.xda-developers.com/showthread.php?t=2256950
Nandroid backup
Is this about right? (and are the links to the right files/posts?)
Is there an easier/safer way of doing this?
Is there any way to not trip the knox counter? Or does the flash of CF Auto to root always trip it?
Any other troubleshooting steps in case things go wrong?
Example:
If phone gets stuck in bootloop at any step - what steps should be attempted before pulling battery, and trying to reflash in ODIN?
If phone shows android lying down with red exclamation mark, what should be attempted?
If root doesn't stick after reboot, what should be attempted?
If custom recovery doesn't stick, what should be attempted?
Hopefully, this will help others like me as well.
Thanks!
looks good, sounds right...
jj14 said:
I've been reading the 4.3 release thread in the "general" forum, and the other relevant threads over there, and am confused after reading thru' 50+ pages of experiences...
I'm on the stock MF9 ROM, rooted, with hotspot mod installed, and camera shutter sound disabled in xml file), and TWRP custom recovery.
I'd like to get to MJA, rooted, with hotspot mod installed, and TWRP custom recovery. (if possible, I'd like to get there without tripping the KNOX counter, but if that is not possible, so be it)
From what I've read, it looks like I need to
Nandroid backup (optional)
Install stock MF9 tar file using ODIN (recovery, ROM, Modem, kernel) - http://forum.xda-developers.com/showthread.php?t=2485502
Take OTA (or use update file from google server link on http://forum.xda-developers.com/showthread.php?t=2504349)
Reboot (Don't install any apps at this time)
Use CF Auto to root using ODIN - http://forum.xda-developers.com/showpost.php?p=41743640&postcount=3
Factory reset just in case
Install goo manager, and flash custom recovery TWRP
Reboot
Reinstall apps
Install new MJA odexed hotspot mod http://forum.xda-developers.com/showthread.php?t=2256950
Nandroid backup
Is this about right? (and are the links to the right files/posts?)
Is there an easier/safer way of doing this?
Is there any way to not trip the knox counter? Or does the flash of CF Auto to root always trip it?
Any other troubleshooting steps in case things go wrong?
Example:
If phone gets stuck in bootloop at any step - what steps should be attempted before pulling battery, and trying to reflash in ODIN?
If phone shows android lying down with red exclamation mark, what should be attempted?
If root doesn't stick after reboot, what should be attempted?
If custom recovery doesn't stick, what should be attempted?
Hopefully, this will help others like me as well.
Thanks!
Click to expand...
Click to collapse
Hi,
It'll be awhile, I live on my boat & Connectivity can be slow this time of day, but I'm dwnldg & will let you know how it goes. I'm praying this is it I'm going on13=14 hrs screwing around with it. Thanks for your style of posting,too, very user friendly.
ms.samsprung said:
Hi,
It'll be awhile, I live on my boat & Connectivity can be slow this time of day, but I'm dwnldg & will let you know how it goes. I'm praying this is it I'm going on13=14 hrs screwing around with it. Thanks for your style of posting,too, very user friendly.
Click to expand...
Click to collapse
Thank you
Is this how it's supposed to be done?
http://forum.xda-developers.com/showthread.php?t=2509605
As the title says, I am currently unable to boot into Philz recovery. I bricked somehow trying to flash sacs 4.3 by stupidly restoring the wrong part of my nandroid backup. Flashed the stock OEM 4.3 MJA and did a factory reset right after. Anyway, when I try to boot into recovery it says "Recovery not seandroid enforcing" and "see warranty bit : recovery" then just reboots into the rom. Can anybody help me out?
Once you flashed stock MJA, you have to re flash Philz and reroot.
Sent from my SPH-L720 using Tapatalk
frostedunit said:
Once you flashed stock MJA, you have to re flash Philz and reroot.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
I did both of those. I currently have root access and flashed the recovery twice to make sure I didn't do it wrong the first time. I am beginning to wonder if the bootloader changed from MF9 to MJA when I flashed the OEM, which won't allow Philz to boot properly.
Bump.
Still stuck without a working recovery...
l0udude said:
Bump.
Still stuck without a working recovery...
Click to expand...
Click to collapse
Odin the tar of philz
http://forum.xda-developers.com/showthread.php?t=2201860
Grab the tar and odin
Confused on how you flashed philz 2 times without a working recovery?
ParkerParker said:
Odin the tar of philz
http://forum.xda-developers.com/showthread.php?t=2201860
Grab the tar and odin
Confused on how you flashed philz 2 times without a working recovery?
Click to expand...
Click to collapse
I did use Odin... that's what I meant. I did get it to boot once after disabling the Knox bootloader with SuperSU and installing the binaries for CWM but when I tried to reboot back into recovery it starts booting then reboots normally again. I think I'm just going to have to wait for a MJA compatible custom recovery. Gonna stock it out for now.
l0udude said:
I did use Odin... that's what I meant. I did get it to boot once after disabling the Knox bootloader with SuperSU and installing the binaries for CWM but when I tried to reboot back into recovery it starts booting then reboots normally again. I think I'm just going to have to wait for a MJA compatible custom recovery. Gonna stock it out for now.
Click to expand...
Click to collapse
Im on MJA and using the latest philz with zero problems, also people are having success using twrp 6301, although I would use caution as its not 100% yet, what rom are you on? You can remove Knox with titanium backup, either way philz is rock solid on 4.3, also if making backups on 4.3 you need to go to Nandroid settings and check the selinux 4.3 box before making a backup in order to restore a 4.3 Rom. Also not sure why you are having to install binaries for cwm? Since you are staying stock cool but if you used cf auto root, which you stated you are rooted, you should be able to Odin philz, did you ota? Flash the modem from Unknownforce? @leaderbuilder you have any input man?
Sent from my SPH-L720 using Tapatalk
ParkerParker said:
Im on MJA and using the latest philz with zero problems, also people are having success using twrp 6301, although I would use caution as its not 100% yet, what rom are you on? You can remove Knox with titanium backup, either way philz is rock solid on 4.3, also if making backups on 4.3 you need to go to Nandroid settings and check the selinux 4.3 box before making a backup in order to restore a 4.3 Rom. Also not sure why you are having to install binaries for cwm? Since you are staying stock cool but if you used cf auto root, which you stated you are rooted, you should be able to Odin philz, did you ota? Flash the modem from Unknownforce?
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
On the oem 4.3 rom still because I can't flash. Can't flash because custom recovery won't boot. I think it's because of knox. Where do I go in titanium backup to disable knox? Because I can't get supersu to do it again.
l0udude said:
On the oem 4.3 rom still because I can't flash. Can't flash because custom recovery won't boot. I think it's because of knox. Where do I go in titanium backup to disable knox? Because I can't get supersu to do it again.
Click to expand...
Click to collapse
I think you are possibly a little over your head. You must take some time and read through the Stickies, Howtos and original posts. Please.
You can easily root (using cf-autoroot - may have to install Superuser from playstore afterwards) and then put a custom recovery (also easily done by installing GooManager and then selecting install custom recovery CWM or TWRP etc) on stock 4.3 that has knox.
From there you can then change/install whatever recovery you want and whatever 4.3 ROM you choose.
BUT I'd highly suggest you take some time, slow down and read, read a little more then after that read some more before you turn your new phone into a shiny paper weight.
leaderbuilder said:
I think you are possibly a little over your head. You must take some time and read through the Stickies, Howtos and original posts. Please.
You can easily root (using cf-autoroot - may have to install Superuser from playstore afterwards) and then put a custom recovery (also easily done by installing GooManager and then selecting install custom recovery CWM or TWRP etc) on stock 4.3 that has knox.
From there you can then change/install whatever recovery you want and whatever 4.3 ROM you choose.
BUT I'd highly suggest you take some time, slow down and read, read a little more then after that read some more before you turn your new phone into a shiny paper weight.
Click to expand...
Click to collapse
Yeah I'll check around and see if I come up with anything. I'm not particularly new to this if you can't tell. I've rooted and customized 2 different phones, as well as jailbroke, themed, and flashed stuff to my ps3 back when it was possible. I rooted and flashed sacs v4 rom and ktoonsez kernel easily almost immediately after getting the phone a few months ago. I'm currently running a rooted, stable, stock 4.3 MJA everything so I guess I'm gonna wait and see if anything new surfaces. I have a suspicion that something is writing over CWM with the stock recovery when I boot into the rom but I don't know what to do about it. GooManager won't install openrecovery for some reason either, I already tried that. Just stalls at the download page. Thanks for the help anyway guys.
If you can get into download mode there is no reason that a custom recovery shouldn't install via PC Odin.
You can try this.
Grab the recovery .tar Launch Odin (make sure to 'Run As Administrator') place the .tar in the PDA slot and make sure you un-check "Auto Reboot".
Once it installs (Pass) take phone off PC, remove battery.
Put battery back in and then boot straight to recovery - Home button, Volume Up and Power button till you see the very little blue 'entering recovery' at the top left. If you get into recovery just choose the 'restart phone option. Or you might want to step through the Philz menus then back out to the Power Options then Reboot system and then 'fix root' and let it reboot.
i installed safestrap and tried updating to oudhs recovery through recovery.
it says it installs but when i reboot its still safestrap.
also tried installing twrp thorugh android emulator still have safestrap.
any suggestions?
You can't flash a recovery. You're going to have to return to stock
Edit how can someone with so many posts know so little about their device. If you're on ss you have to use the recovery that comes with it. Read the stickies
but before i flashed ss, i was already using oudhs.
the reason why i flashed ss i have no idea
bstylz911 said:
but before i flashed ss, i was already using oudhs.
the reason why i flashed ss i have no idea
Click to expand...
Click to collapse
So if you are on MDB or MDL (You must have been if you have the AT&T S4 and custom recovery) just Odin back to stock firmware and re-install whichever custom recovery you want (as long as it is for this phone and LOKId). Make sure you get the custom recovery on the phone before it tries to update to a firmware that you can't do anything (other then Safestrap) with. Search and read to find the information you need if you don't understand what I am telling you. And don't do anything to your phone until you do. Good luck.
EDIT: I have successfully installed the Alliance ROM. Here's how i did it.
Prerequisites:
Your phone at at least 50% battery
A charge cable
MicroSD card that you can plug into your computer
Odin 3.09
SafeStrap, version 3.75 APK on your MicroSD card
Alliance ROM on your MicroSD card
NCG tar.md5 (the big file, not the kernel)
I started off on a rooted 5.0 VZW Galaxy S5. After some confusion, I downgraded to NCG (4.4.2) using Odin. After doing that, I went to Towelroot, got the APK, rooted, downloaded SuperSU from the play store (I had to sign into google at this point), installed it's binaries (NORMALLY! Don't choose the TWRP method), rebooted when it asked me to. From there, I installed BusyBox from the play store and installed it within the app. Then I installed Safestrap (version 3.75), which I had on my MicroSD card. I used the app My Files to navigate to my MicroSD and installed the APK. Then I installed it within the app, and when the "reboot to recovery" button worked, I rebooted into SafeStrap recovery mode. At this point, the Alliance ROM zip file should ALREADY BE ON YOUR MICROSD CARD, WHICH SHOULD BE IN YOUR PHONE. Now, you're going to press the INSTALL button to the top right in Safestrap recovery, and you're going to navigate to your MicroSD card. It might be already opened to that. Then you're gonna select the Alliance ROM and flash it. After it successfully flashes, reboot into download mode (if for some reason you aren't able to do it immediately, you get into download mode by holding volume down, home button, and power button at the same time). Now, using Odin, you're gonna flash the firmware that the instructions in the Alliance thread tells you to (here's the thread: http://forum.xda-developers.com/ver.../rom-alliancerom-build-3-rom-control-t2818632). If everything works, it's gonna take a couple of minutes, optimize apps, and boot.
Huge thanks to Beans and his team for creating the Alliance mod, and huge thanks to Tulsadiver for helping me get through the process during my confusion.
Original thread below
Hi. I'll cut to the chase. I was an idiot and thought I could just flash the Alliance ROM from my SD card, but my phone is currently a factory restored 5.0. So, after unsuccessfully flashing Alliance ROM, I thought, well, I probably need to be on 4.4.2 to do this. So, what I'm wondering is, do I need to go back down to 4.4.2 to install Alliance ROM? And do I need Safestrap recovery to do it, or can I do it from stock recovery (home button+volUp+Power)? I did a lot of digging in the Alliance ROM post and there were no posts regarding my problem/question, probably because they're all experienced and I'm not (this is my first time trying to flash a custom ROM).
It SOUNDS like I need to flash a full stock tar using Odin, is that correct? Once I do that, I would be on stock wiped 4.4.2, I assume. From there, could I flash the Alliance ROM and continue with the instructions? Or do I need to root first and get safestrap and all that crap? I feel like Beans was really vague with his instructions on installing ROMs, but whatever. Please help though, I'm kind of stuck in the middle of this with a softbricked phone.
Thank you so much in advance, I appreciate it.
~isra
EDIT: Also, I was on ROOTED 5.0 Lollipop just before this. I just got so sick of lollipop, I was ready for something different. So here we are. To confirm, my phone is the standard retail SM-G900VZW model.
EDIT2: Apparently App Ops and SuperSU survived the wipe and, after downloading Root Checker, I can confirm that I'm still rooted... Huh.
israphial said:
Hi. I'll cut to the chase. I was an idiot and thought I could just flash the Alliance ROM from my SD card, but my phone is currently a factory restored 5.0. So, after unsuccessfully flashing Alliance ROM, I thought, well, I probably need to be on 4.4.2 to do this. So, what I'm wondering is, do I need to go back down to 4.4.2 to install Alliance ROM? And do I need Safestrap recovery to do it, or can I do it from stock recovery (home button+volUp+Power)? I did a lot of digging in the Alliance ROM post and there were no posts regarding my problem/question, probably because they're all experienced and I'm not (this is my first time trying to flash a custom ROM).
It SOUNDS like I need to flash a full stock tar using Odin, is that correct? Once I do that, I would be on stock wiped 4.4.2, I assume. From there, could I flash the Alliance ROM and continue with the instructions? Or do I need to root first and get safestrap and all that crap? I feel like Beans was really vague with his instructions on installing ROMs, but whatever. Please help though, I'm kind of stuck in the middle of this with a softbricked phone.
Thank you so much in advance, I appreciate it.
~isra
EDIT: Also, I was on ROOTED 5.0 Lollipop just before this. I just got so sick of lollipop, I was ready for something different. So here we are. To confirm, my phone is the standard retail SM-G900VZW model.
EDIT2: Apparently App Ops and SuperSU survived the wipe and, after downloading Root Checker, I can confirm that I'm still rooted... Huh.
Click to expand...
Click to collapse
Download busybox from play store. Install it. Install safestrap. Once recovery is installed, go into recovery, install alliance, from within safestrap, boot into download mode and flash the full firmware Odin tar.
Tulsadiver said:
Download busybox from play store. Install it. Install safestrap. Once recovery is installed, go into recovery, install alliance, from within safestrap, boot into download mode and flash the full firmware Odin tar.
Click to expand...
Click to collapse
Wait, so I don't need to downgrade my phone? Keep in mind I'm on stock rooted 5.0, which just got factory reset so I got nothing except for the root. Also, what full firmware odin tar are you referring to? NE9? This one: https://www.androidfilehost.com/?fid=23610159112652201
Or this one: https://www.androidfilehost.com/?fid=23622183712472727
I'm getting these links from here: http://forum.xda-developers.com/ver...ment/stock-collection-kernels-modems-t2842069
I really appreciate you replying. Thank you.
The first one. That firmware will downgrade you to NE9.
Tulsadiver said:
The first one. That firmware will downgrade you to NE9.
Click to expand...
Click to collapse
Ok, so I don't need to downgrade to install the ROM. Got it. Thank you. Is there anything else I should know?
Not that I know of. ROM installations are different so always refer to their installation instructions. Some will say to flash the firmware first. The op knows best. Alliance NE9 says to do a full wipe (everything but SD card). Install the ROM, reboot to download mode ( don't hit reboot system). Once in download mode, flash the firmware tar and let your phone reboot.
Tulsadiver said:
Not that I know of. ROM installations are different so always refer to their installation instructions. Some will say to flash the firmware first. The op knows best. Alliance NE9 says to do a full wipe (everything but SD card). Install the ROM, reboot to download mode ( don't hit reboot system). Once in download mode, flash the firmware tar and let your phone reboot.
Click to expand...
Click to collapse
So, I installed Safestrap and did all that, but when I press the reboot into recovery button, it just reboots the phone normally. It doesn't go into safestrap recovery. Am I supposed to hold some buttons or something?
Did safestrap ask for SuperSU permissions? Did you install busy box? You can't just download the app.
Tulsadiver said:
Did safestrap ask for SuperSU permissions? Did you install busy box? You can't just download the app.
Click to expand...
Click to collapse
Yes, I've installed BusyBox and given SS root permissions. I installed the APK 3.75 Safestrap that I used to get into SS recovery when I was getting to rooted 5.0 a while back, so I know that the APK isn't corrupt or anything like that.
I forgot. You are on lollipop. You need to flash the NE9 kernel first ( via Odin). You already have safestrap but it doesn't work on lollipop. After you flash the NE9 kernel you will have the option to boot into recovery. Have alliance on your SD card ready to install.
Tulsadiver said:
I forgot. You are on lollipop. You need to flash the NE9 kernel first ( via Odin). You already have safestrap but it doesn't work on lollipop. After you flash the NE9 kernel you will have the option to boot into recovery. Have alliance on your SD card ready to install.
Click to expand...
Click to collapse
Found a "NE9 Stock tar.md5". Does that sound right? DL is here: https://www.androidfilehost.com/?fid=23578570567721275
Found a "NE9 Stock tar.md5". Does that sound right? DL is here: https://www.androidfilehost.com/?fid=23578570567721275
israphial said:
Found a "NE9 Stock tar.md5". Does that sound right? DL is here: https://www.androidfilehost.com/?fid=23578570567721275
Click to expand...
Click to collapse
That is it.
Tulsadiver said:
That is it.
Click to expand...
Click to collapse
Thank you. I'm going to flash the kernel then, then I'll get back to you if anything comes up. Again, I really appreciate you helping me. Thank you.
Tulsadiver said:
That is it.
Click to expand...
Click to collapse
It booted into stock recovery mode after odin successfully flashed NE9. Now do I install the ROM from stock recovery, or do I boot the phone and get to Safestrap to install the ROM from Safestrap recovery? I am currently in recovery mode.
You must not have had safestrap on your phone after all. Can you get back to download mode? You probably need to flash your lollipop kernel to get back to lollipop.
Tulsadiver said:
You must not have had safestrap on your phone after all. Can you get back to download mode? You probably need to flash your lollipop kernel to get back to lollipop.
Click to expand...
Click to collapse
I definitely had safestrap. Though, here's something: Everyone talks about a menu that pops up during boot that allows you to enter either safestrap recovery, or boot, and I've never had/seen that menu, even when I was rooting 5.0. Yes, my BusyBox worked and was properly installed, and yes, I had Safestrap recovery installed.
I just tried rebooting and it after sitting at the first screen for a while, it rebooted quickly and went back into recovery mode. What if I try installing Alliance from recovery mode? Will it work?
israphial said:
I definitely had safestrap. Though, here's something: Everyone talks about a menu that pops up during boot that allows you to enter either safestrap recovery, or boot, and I've never had/seen that menu, even when I was rooting 5.0. Yes, my BusyBox worked and was properly installed, and yes, I had Safestrap recovery installed.
I just tried rebooting and it after sitting at the first screen for a while, it rebooted quickly and went back into recovery mode. What if I try installing Alliance from recovery mode? Will it work?
Click to expand...
Click to collapse
I've never been on stock recovery before. I think it has to be a custom recovery. You might need to pull your battery and let it set for a bit and see if you can get into download mode.
Tulsadiver said:
I've never been on stock recovery before. I think it has to be a custom recovery. You might need to pull your battery and let it set for a bit and see if you can get into download mode.
Click to expand...
Click to collapse
I can get into download mode perfectly fine. I'm going to kernel back to 5.0 then...
But what do I do now? Should I downgrade to 4.4.2 with the stock firmware once I successfully boot 5.0?
EDIT: Yup, booted 5.0 perfectly fine. Now what? Downgrade to 4.4.2 and flash the NE9 Kernel?
Proof that Safestrap is on my phone:
http://imgur.com/cGa1v1n
Ive been going so crazy trying for about 15 hours total now trying to root and get a custom recovery on my phone, for some reason, nothing will work. I do have alot of experience with rooting and ive done just about everything, attempting to get this phone to flash a custom recovery.
ATT SGH i337
4.4.4
KTU84P.I337UCUFNJ4
I am currently rooted, but i cannot get a custom recovery. I have just tried this method,
http://forum.xda-developers.com/showthread.php?t=2297033
with that tool, however after running it, it successfully flashes the recovery, then boots me into the Odin Mode Download screen with the picture of an android. Same thing with trying any other method of flashing a recovery. Can someone please tell me how to get past this, im so exhausted trying to fix this. I tried factory reseting my phone from the phones settings and even that brought me back to the download screen with a picture of an android. I cant get into any recovery at all! Stock or custom it sends me back to that screen.
How can i flash a custom recovery and get this working? Thank you guys in advance
You're on nj4. Safestrap is the only recovery you're going to be able to use. Read the stickies in the general forum
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
You're on nj4. Safestrap is the only recovery you're going to be able to use. Read the stickies in the general forum
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
i installed the proper NJ4 safestrap apk and pressed install recovery, however it still says it is not installed "reboot to recovery" is greyed out. Upon booting into recovery, i am still stuck in Odin mode. Anyway for me to stop odin mode from continuing to come up instead of recovery?.
I would guess the system is looking for stock recovery, and it isn't there any more due to your flashing the CWM OUDHS recovery and/or TWRP. You probably need to put the stock recovery back.
I know and I've been trying to find out a way to do that. Could you help me if that's what I need to do? Once I reinstall stock recovery will safestrap work?
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
I would suggest that you flash nb1 then nb4, root and install safestrap. At this point, a clean install is your best bet. Refer to this thread in the general forum.
U can get stock recovery back by either flashing the whole stock firmware via odin or extracting the recovery image from the firmware and flashing it by its self via odin I don't know anything about safestrap as I'm on Canadian version some one else can hopfully help u out with tht
I read what you posted and I don't entirely understand. Could you point to me to a download a maybe dumb it down a bit?
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
How would I do that..
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
xstokerx said:
U can get stock recovery back by either flashing the whole stock firmware via odin or extracting the recovery image from the firmware and flashing it by its self via odin I don't know anything about safestrap as I'm on Canadian version some one else can hopfully help u out with tht
Click to expand...
Click to collapse
Exxoriscism said:
I read what you posted and I don't entirely understand. Could you point to me to a download a maybe dumb it down a bit?
Click to expand...
Click to collapse
Exxoriscism said:
How would I do that..
Click to expand...
Click to collapse
You are on NJ4 (I337UCUFNJ4). There is no flashable "whole stock firmware" for that version. There is a flashable whole stock firmware for the NJ1 version (I337UCUFNB1). Also, there is no easy way to "extract the recovery image out of the firmware and flash it by its self via odin." The reason for this is that you need a .tar archive to flash in odin, so if you extract just the recovery, you then need a Linux box, or a Linux virtual machine running on your windows pc to make the tar file from it.
This is why I suggested that you flash the NB1 full stock firmware, and then flash the upgrade to NJ4 from stock recovery, as outlined in the guide I linked.
As you asked for a little more detailed help, I'll try to walk you through following the Odin to Stock, Updating, Rooting, and Safestrap Guide.
First, read through post #1 and the FAQ in post #3. Next, you need to decide what version you want to end up with. Let's assume that you want to end with NJ4 -- KitKat 4.4.4. (If you want to end with OC3 -- Lollipop 5.0.1, then the instructions are a little different.)
In post #2, under the section titled NJ4 -- KitKat 4.4.4 expand Step 1 - Odin to stock. The files you need to download are at the top of this section. Follow the steps; they are pretty self explanatory. Part 1 installs full stock NB1, and Part 2 installs the upgrade to NJ4.
You are now on fully stock NJ4. If you want to root and install Safestrap, expand Step 2 -- Root and Install Safestrap. The files you need to download are at the top of this section. Again, the steps are pretty self explanatory.
That's it. If you want to now install custom firmware, you are ready, or you can just stay on stock if you prefer.
creepyncrawly said:
You are on NJ4 (I337UCUFNJ4). There is no flashable "whole stock firmware" for that version. There is a flashable whole stock firmware for the NJ1 version (I337UCUFNB1). Also, there is no easy way to "extract the recovery image out of the firmware and flash it by its self via odin." The reason for this is that you need a .tar archive to flash in odin, so if you extract just the recovery, you then need a Linux box, or a Linux virtual machine running on your windows pc to make the tar file from it.
This is why I suggested that you flash the NB1 full stock firmware, and then flash the upgrade to NJ4 from stock recovery, as outlined in the guide I linked.
As you asked for a little more detailed help, I'll try to walk you through following the Odin to Stock, Updating, Rooting, and Safestrap Guide.
First, read through post #1 and the FAQ in post #3. Next, you need to decide what version you want to end up with. Let's assume that you want to end with NJ4 -- KitKat 4.4.4. (If you want to end with OC3 -- Lollipop 5.0.1, then the instructions are a little different.)
In post #2, under the section titled NJ4 -- KitKat 4.4.4 expand Step 1 - Odin to stock. The files you need to download are at the top of this section. Follow the steps; they are pretty self explanatory. Part 1 installs full stock NB1, and Part 2 installs the upgrade to NJ4.
You are now on fully stock NJ4. If you want to root and install Safestrap, expand Step 2 -- Root and Install Safestrap. The files you need to download are at the top of this section. Again, the steps are pretty self explanatory.
That's it. If you want to now install custom firmware, you are ready, or you can just stay on stock if you prefer.
Click to expand...
Click to collapse
Yes and i did everything under the NJ4 Kitkat 4.4.4 section. I am rooted and everything worked except for safestrap. I open it and press install recovery and everytime it finishes it says "state:Not Installed". And reboot to recovery is greyed out. Upon manually rebooting into recovery mode, i am in normal stock recovery.
I cant use the selinux mode changer it says. To root i didnt use towelroot because installing the NC1 kernel disables my wifi connection, and since the phone has no service, i had to use KingO Root. I have confirmed root access using root checker. But Safestrap wont work.
What do i do? Is safestrap not working because i didnt root with towelroot? I assumed it didnt quite matter how i rooted. If it is because of towelroot, then how do i get towel root to work while on the NC1 kernel with no wifi and no cell service?
Update: I found a selinux Mode changer apk on xda and installed it. I tried it and safestrap still would not work and said "not installed". I also reflashed the NC1 Kernel and the same thing happened. I booted into recovery for confirmation.
I guess its maybe because i didnt root with towelroot? But it is impossible without phone service because flashing NC1 disables the wifi. Please reply as soon as you can
I can't help with your current issue with safestrap because I don't own this phone. I have worked on my son's S4, and a couple of others that have come through my hands. I have performed the exact process you just used with no issues.
I would suggest you post your issues in the guide thread where someone who has more experience with safestrap can help.
creepyncrawly said:
I can't help with your current issue with safestrap because I don't own this phone. I have worked on my son's S4, and a couple of others that have come through my hands. I have performed the exact process you just used with no issues.
I would suggest you post your issues in the guide thread where someone who has more experience with safestrap can help.
Click to expand...
Click to collapse
Can i move this thread?
Exxoriscism said:
Can i move this thread?
Click to expand...
Click to collapse
You can't move this thread into that one. But you can state your issue in that thread and then provide a link to this one for more info.
Sent from my Nexus 9 using XDA Free mobile app