Just asking who has flashed 4.3 then found its full of bugs and then reflashed 4.2.2 !!
Sent from my Nexus 4 using xda app-developers app
nickslg said:
Just asking who has flashed 4.3 then found its full of bugs and then reflashed 4.2.2 !!
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Me, just now.
Was unhappy with the scrolling (stuttery & laggy - to me it seemed like the touch sensor was being polled less because while your finger was touching & moving, the screen scroll stuttered, when released, it continued its scrolling smoothly)
Also, WiFi was sometimes not reconnecting - had to either reboot or forget / re-join.
also had an issue with the camera flash failing to operate after 3 or 4 photos.
I was beginning to think I was imagining my N4 was nice an smooth - but I got so annoyed with 4.3 I unlocked & flashed 4.2.2 factory image. IT Is DEFINITELY smoother.
Screen stutter/lag can be rendered by checking "hardware overlays" in dev options
Sent from my Nexus 4 using xda app-developers app
I'm missing aokp ROMs from 4.2.2 going back when I get to my computer later today
Sent from my Nexus 4 using xda app-developers app
nickslg said:
I'm missing aokp ROMs from 4.2.2 going back when I get to my computer later today
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I've flashed a couple of 4.3 ROMs starting with stock but keep going back to LiquidSmooth v 2.9. I don't see any degradation in performance with 4.3, I have been getting better battery life from LiquidSmooth.
There were a couple of apps that I use that were not performing well with 4.3. I decided to flash back to cm because of this. It was mainly Swype that was driving me crazy. I'm unsure if it was the fault of Swype not being updated for 4.3 or if it was the screen polling of 4.3 everyone is talking about.
Sent from my Nexus 4 using xda app-developers app
Still on 4.2.2 lol Never upgraded...:victory:
nickslg said:
Screen stutter/lag can be rendered by checking "hardware overlays" in dev options
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I don't see hardware overlays. Do you mean "disable HW overlay " or "force GPU rendering" ?
These were default (I.e not disabled and not forced)
Im not sure these would help?!?!
I tried 4.3 two times, but after a few hours I reverted back to CM10.1 :silly:
I'll wait for good and stable custom kernels, and for good custom ROM's.
It's me. I expect 4.3 very much. I update to stock 4.3, Titanium can't remove system app. So I tried to use PA rom, version 3.91, while I'm download PA rom, I detect a new version of PA, version 3.92. I'm very suprise with PA group speed, they're provide rom patchs continuous. And I had to download from beginning. After that, I install new rom with a big expectation but titanium still can't remove system app. Finally I had to restore to PA 3.69 by TWRP and wait a new rom version :crying:
Tried a custom CyanogenMod 4.3 Build, but I prefer to stay with the "current" nightlies right now.
Theres a reason why they didnt start rolling out nightlies already.
A question, where did you get the CM build? Is it from the team itself or was it made by someone else?
4.3, same on the outside, fubar on the inside.
My fears about the head honcho of android chrome being made head of the whole OS have come to bare.
If it wasn't for the fact that 4.3 fixed the double dial issue for us Solavei users id go back to CM 10.1.2 (4.2.2)
Sent from my Nexus 4 using Tapatalk 4 Beta
Am I the only one whose 4.3 is working just fine?
From a Nexus 4 bathing in Jelly Beans
Logomotph said:
Am I the only one whose 4.3 is working just fine?
From a Nexus 4 bathing in Jelly Beans
Click to expand...
Click to collapse
No, mine's working great also on 4.3. Missing the added functionality of custom Roms atm. Just waiting on cm 10.2 to become official:thumbup:
Sent from my Nexus 4 using Tapatalk 4 Beta
Logomotph said:
Am I the only one whose 4.3 is working just fine?
From a Nexus 4 bathing in Jelly Beans
Click to expand...
Click to collapse
I find it hard to believe its working as it should be
Sent from my Nexus 4 using xda app-developers app
I might revert back. I get several hours less battery time with 4.3 because Android OS "keep awake" is draining my battery. I never had such issues with 4.2.2. :/
lowrider262 said:
No, mine's working great also on 4.3. Missing the added functionality of custom Roms atm. Just waiting on cm 10.2 to become official:thumbup:
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I quite like the stock rom....kinda sad Matr1x only supports the JSS build....might flash a JSS rom...or maybe build it myself.
But yeah, I'm happy with 4.3. Never had any issues with OTAs
nickslg said:
I find it hard to believe its working as it should be
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Everything seems to be working well. I couldn't test BLE, because I don't have a BLE device, but otherwise everything seems to be fine.
Yea I went back to 4.2.2... I'll wait for liquid smooth too upgrade to 4.3 before I flash another ROM.
Sent from my Nexus 4 using xda premium
Related
Recently i installed CM10.1 stable(clean install).
After i applyed franco kernel it rebooted then 2 weeks after i uninstalled Tasker after it was done it gone for reboot.
I extracted last_kmsg.txt and it just said at the end Reason:Reboot.
No UVs or OCs all default settings from kernel.
http://db.tt/QWqFEqqm
Not only reboots but my phone turns off just without a reason when i am playing music. Think i am going to flash paranoid again
(Using cm kernel btw)
Sent from my Nexus 4 using xda app-developers app
sonikk4ever said:
Not only reboots but my phone turns off just without a reason when i am playing music. Think i am going to flash paranoid again
(Using cm kernel btw)
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I think im gonna wait for Android 4.3 update then go back to stock just whit root,im not doing flash 4.3 sysdump thing.
how about try the 10.1.2?
http://get.cm/get/jenkins/34261/cm-10.1.2-mako.zip
it runs pretty stable for my daily driver, never slows down or even reboots itself. im using matr1x kernel on default setting.
did you undevolt?
Sent from my Nexus 4 using Tapatalk 2
The nightlys have been rock solid for me
Guyz im on lastest CM10.1 whit FK kernel but still i have issues whit screen flickering and more.I think its device hardware itself.
Karlo666 said:
Guyz im on lastest CM10.1 whit FK kernel but still i have issues whit screen flickering and more.I think its device hardware itself.
Click to expand...
Click to collapse
have u tried going back to stock first? i believe it's a hardware issue because in my experiences using so many custom roms based on aosp, cm and aokp, i never even seen the screen flickering issue at all.
Sent from my Nexus 4 using Tapatalk 2
I'm a noob to tables but have done many flashes to my phones. My main question is, I'm rooted and ready to flash a ROM to my Nexus 7 but I'm confused about a few things. I'm running firmware 4.3 so do I need to flash a ROM that's made for 4.3? I'm interested in the Carbon ROM but it doesn't state that it for 4.3.
I'm interested in a stable ROM that has a lot of customizing options. Any suggestions?
Thanx in advance for helping out a Noob!
Sent from my Nexus 7 using Tapatalk 2
ROM = Firmware
Flashing ROM = Flashing different Firmware
If you flash a 4.2.2 ROM over a 4.3 STOCK ROM, then you will have 4.2.2, and nothing about your device will be 4.3
just to verify, you have the old Nexus 7 right?
Yes, old Nexus 7. Thanx! Now I feel comfortable trying some Roms.
Sent from my Nexus 7 using Tapatalk 2
What about the bootloader?
Sent from my Nexus 4 using xda app-developers app
ZombieUsr said:
What about the bootloader?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
There could be partition issues when you have the wrong one.Like there was with the 4.2 update.If you flash a 4.2 rom onto a 4.1 bootloader your whole data will get moved into another /0 folder
Sent from my Nexus 7 using xda app-developers app
filipathtc said:
There could be partition issues when you have the wrong one.Like there was with the 4.2 update.If you flash a 4.2 rom onto a 4.1 bootloader your whole data will get moved into another /0 folder
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
There isn't.
Sent from my Galaxy Nexus
filipathtc said:
There could be partition issues when you have the wrong one.Like there was with the 4.2 update.If you flash a 4.2 rom onto a 4.1 bootloader your whole data will get moved into another /0 folder
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
The nested 0 folders was a recovery issue, not a bootloader one. Neither CWM nor TWRP could initially deal with the new multi-user directory structure. Koush and Team Win promptly updated their recoveries to resolve it.
Sent from my Nexus 7 using Tapatalk 4
Southrn Dawg said:
I'm interested in a stable ROM that has a lot of customizing options. Any suggestions?
Click to expand...
Click to collapse
I've been very happy with RasBeanJelly. It has a good cross between features, speed, and light-weight. It tends to be quite stable. I ran it for about 7 months, until I decided that l decided I needed more excitement in my life and jumped to a bleeding edge ROM. Depending on how the new ROM does/does-not develop, I may go back.
Before you go changing ROMs, make sure you are ready. Then make sure you are really ready. After a couple of times you may actually be ready. Look around, and you will find some guides. Here's a good place to start: Flashing Guide. The biggest issue I have had is making sure I have a good BACKUP and RESTORE strategy that works.
Good Luck,
-John
Slimbean 4.3 beta 3 is pretty feature-rich and is a beta in name only...it's been rock solid for me. Get it at www.slimroms.net
Thanx for the ROM suggestions! I been running CyanogenMod Ver 10.2 Unofficial and I like it but now I'm ready to try some more Roms. I've got the hang of flashing stuff again so now I feel comfortable trying some new stuff.
Sent from my Nexus 7 using Tapatalk HD
I am experiencing browser freezes on the AOSP browser. I am currently on PA 3.96,but I though they were due to deadlocks but apprarebtly not ad I am on the deadlock fixed paranoid android. I Aldo had this issue on stock 4.3 and all JSS ROMS. Anyone have this issue too? Thanks
oxxshadow said:
I am experiencing browser freezes on the AOSP browser. I am currently on PA 3.96,but I though they were due to deadlocks but apprarebtly not ad I am on the deadlock fixed paranoid android. I Aldo had this issue on stock 4.3 and all JSS ROMS. Anyone have this issue too? Thanks
Click to expand...
Click to collapse
I haven't noticed this on mine. Make a titanium backup and wipe data cahe and install again ROM and gapps, there's a new pack of gapps from PA.
Sent from my Nexus 4 using xda app-developers app
I get freezes on every ROM 4.3 some more than others but I had better luck with 8/15 official cm
Sent from my Nexus 4 using xda premium
Droid2drummer said:
I get freezes on every ROM 4.3 some more than others but I had better luck with 8/15 official cm
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Is there an official cm10.2?
Sent from my Nexus 4 using xda app-developers app
Looking for a stable 4.3 rom. Currently running CM10.2 and there are too many bugs right now.. Have to reboot too often..
So what do you guys recommend? Only feature I really want is track skip with volume buttons..
Thanks.
Ohh and if it's not too much to ask could you link me to the rom.. I'm at work and not really supposed to be playing with my phone right now.
Sent from my Nexus 4 using xda app-developers app
You could actually go for any Stock Rooted JWR 4.3 firmware. Install xposed module on top it and Gravitybox. Voila.
Sent from my Nexus 4 using Tapatalk 2
jerseykat1 said:
Looking for a stable 4.3 rom. Currently running CM10.2 and there are too many bugs right now.. Have to reboot too often..
So what do you guys recommend? Only feature I really want is track skip with volume buttons..
Thanks.
Ohh and if it's not too much to ask could you link me to the rom.. I'm at work and not really supposed to be playing with my phone right now.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Hi, I use SlimBean 4.3 Build 1 and no bug, stable and of course you can skip tracks with volume buttons
Purity for sure
Link: http://forum.xda-developers.com/showthread.php?t=null
Sent from my Nexus 4 using Tapatalk 4
Orr.Penn.18 said:
You could actually go for any Stock Rooted JWR 4.3 firmware. Install xposed module on top it and Gravitybox. Voila.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
+1 I do this and it works really well for me
Sent from my Nexus 4 using xda app-developers app
Paranoid Android is pretty stable. Loved it with AK kernel and their LCD presets.
Currently flashing CM 10.2 Nightly (latest). They are very stable. Only issue is that you need to flash every day or couple of days to be updated
Thanks guys.. Going to try stock with the add on
Sent from my Nexus 4 using xda app-developers app
Im using PSX rom. while it is a great rom 95% of the time, the other 5% of the time it freezes(well, maybe less, but every time it does it super annoying). The developer of the rom says that this is a common problem of the 4.3 builds. that sounds a little strange to me. While Im probably didnt understand him right, I still see that the latest version of PSX freezes sometimes. so after 4-5 month with that rom, I think it is time to move on. Could you please state which rom you are using, whether or not it freezes, what are its pros and cons, and your final recomandation?
Thanks!!
Cyanogenmod 10.2 nightly running smoothly here. No freezing at all
Sent from my GT-I9100 using xda app-developers app
Stock ROM, Xposed module, Gravity Box. Let's you configure 95% of the stuff a custom ROM does.
Sent from my Nexus 4 using xda app-developers app
chrisrozon said:
Stock ROM, Xposed module, Gravity Box. Let's you configure 95% of the stuff a custom ROM does.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I don't have any freezing issues. There are cases where I install incompatible kernel and it cause the phone to reboot, but is solved by using the stock kernel that come with that rom.
Get PA rom. You won't be disappointed.
Sent from my Nexus 4 using Tapatalk 4