Related
hi!
I wanted as a normaly update my defy from JB QUARX CM10 25.8. to JB QUARX CM10 28.8.. BUT, when it was instaling suddenly Defy restarted. After it was only showing the logo GOOGLE bud i can not go to boodloader or recovery. I tryied to flash sbf file with RSD but when I connected my defy to PC only white led blinked and nothing happened. PC is not see defy.
What do I do?
pls help me....
thx
Sorry for my english...
sterver1 said:
hi!
I wanted as a normaly update my defy from JB QUARX CM10 25.8. to JB QUARX CM10 28.8.. BUT, when it was instaling suddenly Defy restarted. After it was only showing the logo GOOGLE bud i can not go to boodloader or recovery. I tryied to flash sbf file with RSD but when I connected my defy to PC only white led blinked and nothing happened. PC is not see defy.
What do I do?
pls help me....
thx
Sorry for my english...
Click to expand...
Click to collapse
see this http://forum.xda-developers.com/showthread.php?t=1150155 try to charge your battery fully. hope it works..
you tried in another PC o USB cable ?
I can not go to recovery. But I managed to go to flash menu (or what is this (power + volumeup and place battery))- i tryed to flash this:"Froyo_CEE_2.2.2\JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_P DS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.s bf" with RSD Lite but: "Failed lashing process. Failed lashing process. Phone[0000]: Error getting subscriber unit informatieon. Device API Error: 0xE 0030007 Command RQHW (0xE0831007); phone disconnected"
After it I tryed agine go to to power + volumeup and place battery but it write Baterry low. Now propably I charing batery (I have connected my defy to AC and GOOGLE is showing, battery heating). Then I try to flash it agine. - that isn't working
Propabbly I must use maccgyver hack but I haven't got any bad or superfluous USB cabel.
sterver1 said:
I can not go to recovery. But I managed to go to flash menu (or what is this (power + volumeup and place battery))- i tryed to flash this:"Froyo_CEE_2.2.2\JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_P DS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.s bf" with RSD Lite but: "Failed lashing process. Failed lashing process. Phone[0000]: Error getting subscriber unit informatieon. Device API Error: 0xE 0030007 Command RQHW (0xE0831007); phone disconnected"
After it I tryed agine go to to power + volumeup and place battery but it write Baterry low. Now propably I charing batery (I have connected my defy to AC and GOOGLE is showing, battery heating). Then I try to flash it agine. - that isn't working
Propabbly I must use maccgyver hack but I haven't got any bad or superfluous USB cabel.
Click to expand...
Click to collapse
Try to enter stock recovery ab do a factory reset
If your battery is really empty you can use ab old Nokia wallcharger out else ....... just figure out what is plus and what is minus....
Sent from my MB526 using xda app-developers app
Do you have the appropriate drivers installed on your pc for rsd? You have to be able to flash an sbf, a failed Cm update flash won't brick your Defy, it's much harder to brick it...
Sent from my MB525 using xda app-developers app
lexer98: Yes I tried it... It is same.
bone101: I can not enter to any recovery.
sa3e1: Yes, I have all drivers.
I try the other.
Turn off defy, then hold power and vol+ button for 5-10 sec, when you release the buttons, your phone will power up in Stock bootloader. Does it work until this point?
Sent from my MB525 using xda app-developers app
sa3e1 said:
Turn off defy, then hold power and vol+ button for 5-10 sec, when you release the buttons, your phone will power up in Stock bootloader. Does it work until this point?
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
When I do that, on screen show: Battery Low - Cannot program.
But all is OK because I bought universal charger and now I'm charing battery..:cyclops:
Next I flash correct SBF file via RSD Lite. Is it ok?
And the phone isn't charging when it's off?? I hope it will be ok after charging battery with external charger! Then go to stock bootloader and flash a stock sbf, or if you want to go straight to CM10 try Easy Recovery sbf:
http://forum.xda-developers.com/showthread.php?t=1787541
Sent from my MB525 using xda app-developers app
Done
Hurray....
My Defy is working now....
Thanks for your help.
I did it as follows: I chared my battery with universal charger. Then I went to stock bootloader (power+volume up) and conected my phone to PC. After it I flash two SBF files* via RSD Lite. Then I went to recovery and wiped all. Now my phone working well....
* first: Froyo_CEE_2.2.2.zip
second: CM7RC1.5_16_09_11_custom.sbf
(I will upload this files to some File Hosting and I'll post here links)
sterver1 said:
Hurray....
My Defy is working now....
Thanks for your help.
I did it as follows: I chared my battery with universal charger. Then I went to stock bootloader (power+volume up) and conected my phone to PC. After it I flash two SBF files* via RSD Lite. Then I went to recovery and wiped all. Now my phone working well....
* first: Froyo_CEE_2.2.2.zip
second: CM7RC1.5_16_09_11_custom.sbf
(I will upload this files to some File Hosting and I'll post here links)
Click to expand...
Click to collapse
Why 2?
Only 1 is enough
Also AICS that is older version of CM7…
Flash froyo and root it...
Install 2ndInit and using cwm install CM10
If you screw up...I am not responsible!
Sent from my MB525 using xda app-developers app
All is ok.... Now I'm using CM10.
Attempting to update a US-Tmobile Defy (green lens) with CM7 to CM10
1. As a 1st step wanted to do a full Nandroid - but the backup repeatedly failed.
2. Next, installed RSD lite to unroot, revert to stock, 1st tried with "JORDN_U3_6.36.0_SIGNED_USAJRDNTMOB1B4B5DE1028.0R_JORDANTMO_P022_HWp3_Service1FF.sbf.gz"
After completion, the Defy was stuck in a boot loop
3. Finally, used RSD lite attempting to unroot & revert to stock using, "T-Mobile_MB525_6.19.0_1FF.zip"
After completion, the phone would not boot nor go into bootloader.
The battery was very low and I suspect that it may be the reason I cannot start the bootloader. The phone, in its current state does not seem to charge the battery.
Please help!
Doug
All you had to do was wipe data after 1 St flash via stock recovery
But now search around for the mcgyer trick to charge your phone and then flash the first sbf and wipe data afterwards
Never flash with a low battery
Sent from my MB525 using xda premium
thekguy said:
All you had to do was wipe data after 1 St flash via stock recovery
But now search around for the mcgyer trick to charge your phone and then flash the first sbf and wipe data afterwards
Never flash with a low battery
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
Thanks,
found the thread and am gave it a try. Still no love insofar as getting into the boot loader. Perhaps the battery is not dead. Reads 3.9v
Anything else I can do to try n summon the bootloader?
techhome said:
Thanks,
found the thread and am gave it a try. Still no love insofar as getting into the boot loader. Perhaps the battery is not dead. Reads 3.9v
Anything else I can do to try n summon the bootloader?
Click to expand...
Click to collapse
Do you get something like :
'battery ok in bootloader' ?
EDIT:
I see you are not able to see boorloader at all.
one thing you can do is :
connect the phone to your system
start rsd lite
take out the battery
insert it again
and immediately press power and volume up.
you may not see the bootloader on the screen but your device may show up on rsd lite.then you can flash your sbf.
kanpurite said:
Do you get something like :
'battery ok in bootloader' ?
EDIT:
I see you are not able to see boorloader at all.
one thing you can do is :
connect the phone to your system
start rsd lite
take out the battery
insert it again
and immediately press power and volume up.
you may not see the bootloader on the screen but your device may show up on rsd lite.then you can flash your sbf.
Click to expand...
Click to collapse
You nailed it, looks like I am out of the woods... Thanks!
Happy flashing
Sent from my MB525 using xda premium
what do i do if it says "Battery Low..Cannot Program"??
prateekranka said:
what do i do if it says "Battery Low..Cannot Program"??
Click to expand...
Click to collapse
You must charge your battery. The possible ways are:
1. with friend's defy or external charger
2. McGyver way - find in threads, but use with caution
Hi there,
I bricked my Defy Plus from CM10, 2ndInit. I've wanted to flash again the original .sbf cause of warranty issues. I wasn't sure witch version I had on the original so I thought I'll go from one to one in the list of droid developers SBF( can't create link )
After flashing with RSD light there was 2 possible outcome:
1. Flashing completed normally but after device rebooted, it hanged at the Motorola Logo infinetly.
2. Flashing completed, but the device turned off itself, and after trying to turn on, nothing was rendered, HOWEVER I've noticed, that it can be still booted into bootloader mode, cause I could see it listed in the RSD Lite device list.
I thought that was the worst case scenario, turns out its not:
After flashing DFP-137 device cannot be turned on, won't apper in RSD Lite, nothing.
A symptem is, that if connected the white led glows.
Is it possible I bricked it to such state, that I've got no options? If not, what should I do.
I think the cell got supply, cause I licked it, and felt normal ( electricity was riding trough my thoung ).
Any tipps are welcome, hit me!
Maybe it's low on battery, did you factory reset from stock recovery?
Sent from my MB525 using xda app-developers app
sa3e1 said:
Maybe it's low on battery, did you factory reset from stock recovery?
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
No, I figured for removing rooted state, I should reflash the full .sbf.
As I said, it feels charged, mb I'll try go for McGuyver charing method.
If I can reanimte my Defy into bootloading state, how do I know witch .sbf is the correct one??
defy problem
Dear All,
I had flashed Motorola defy plus with kitkat a month ago. As it was getting hanged, i tried to switch it to stock rom but the RSD lite is giving error while flashing everytime.
i have tried many sbf but it diidnt worked out. kindly let me know the correct procedure and the SBF should i flash.
Now its showing Motorola logo only and doesnt move ahead neither i am unable to reach stock recovery.
i did it all by charging battery from universal charger as i cant even charge my battery.
I am in need of urgent help and didn't want let die my DEFY PLUS
Regards
Abhishek
Hello! I think i bricked my phone. (MB525). With the latest Quarx CM10 everything is fine, the phone charge, etc... But randomly the phone dont charge anymore with wall charger or usb.
Now, i cant boot, the phone dont charge. When i connect to pc i see white led. With battery and wall charger i can access to bootmenu, recovery. But if i disconnect from wall charger the phone shutdown immediatly. So i cant flash any sbf via rsd lite. I try to restore an older nandroid, but nothing changed.
What can i do? Please help.....
Brother just flash or phones sbf Frm rsd lite u will search tutorial here
Sent from my MB526 using xda premium
illumanati22 said:
Brother just flash or phones sbf Frm rsd lite u will search tutorial here
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I cant flash it. Bootmenu or recovery only work with power cord on the wall. If i disconnect and try to attach the phone to pc (to flash) its shut down
XianHuen said:
Hello! I think i bricked my phone. (MB525). With the latest Quarx CM10 everything is fine, the phone charge, etc... But randomly the phone dont charge anymore with wall charger or usb.
Now, i cant boot, the phone dont charge. When i connect to pc i see white led. With battery and wall charger i can access to bootmenu, recovery. But if i disconnect from wall charger the phone shutdown immediatly. So i cant flash any sbf via rsd lite. I try to restore an older nandroid, but nothing changed.
What can i do? Please help.....
Click to expand...
Click to collapse
Hi, there!
I'm not an expert, but maybe I can give you a direction as a starting point.
Either your battery is empty and only needs to be reloaded or it is to old, so you have to get a new one.
A third posibility is, that the battery is empty and had not always contact to get loaded, but that I can't say from here and it's up to you, to check over.
And also your cable and your plug could be damaged.
Your options:
1. Reload your battery (and test its health) in another device or an external loader. You could put it in another Defy of a friend. Or bring it to a service center for cell phones for reloading.
2. You could otherwise buy an new (loaded) battery. Service center again?
3. Finally you could try the following method with the risk of a final damage to your battery:
http://forum.xda-developers.com/showthread.php?t=892026
Tell us, how it has been going for you.
Good luck!
:fingers-crossed:
XianHuen said:
Hello! I think i bricked my phone. (MB525). With the latest Quarx CM10 everything is fine, the phone charge, etc... But randomly the phone dont charge anymore with wall charger or usb.
Now, i cant boot, the phone dont charge. When i connect to pc i see white led. With battery and wall charger i can access to bootmenu, recovery. But if i disconnect from wall charger the phone shutdown immediatly. So i cant flash any sbf via rsd lite. I try to restore an older nandroid, but nothing changed.
What can i do? Please help.....
Click to expand...
Click to collapse
As long as the white LED is there, you are fine. Just charge that thing for some hours.
If you have a nandroid backup you can restore that without the battery but with the wall charger connected.
Swift2603 said:
As long as the white LED is there, you are fine. Just charge that thing for some hours.
If you have a nandroid backup you can restore that without the battery but with the wall charger connected.
Click to expand...
Click to collapse
Thank you guys! I try to charge it via usb, but the phone always started automatically after 5 minutes
That happened to me while ago, I just plug my phone to the wall charger and left it for like two hours and the battery charged quite fine.
XianHuen said:
Hello! I think i bricked my phone. (MB525). With the latest Quarx CM10 everything is fine, the phone charge, etc... But randomly the phone dont charge anymore with wall charger or usb.
Click to expand...
Click to collapse
I don't have any advice really, but just wanted to note that I've experienced something similar. I'm on the Nov 2 CMX build from Quarx.
Every couple of days, my phone won't charge when connected to wall charger or USB, signal bars never change, wifi is dead, and clock is dead. My phone basically stops functioning altogether until I reboot. Rebooting always seems to fix it for me though.
If you need advice on which SBF to flash send me a PM or something. I had to flash an SBF for the first time a month or two ago, and finding the proper SBF was the most difficult part of it all.
Thanks for the help guys, i can flash the sbf, but now i get "code corrupt" and "battery low" errors. I can charge the phone via pc, but its restart in 5 minute. I keep charging it, but after 3 hour its still "low battery" message. With wall charger, the phone enter to bootlader and 1-2 minutes later the "battery low" error disappear but no charging led. After this the phone dont have enough battery life (i keep doing this charging method for 2 hours)
Charge your battery longer.
Check the MD5SUM of your SBF
This post has been beamed to this area by quantum teleportation.
Coodarah said:
Charge your battery longer.
Check the MD5SUM of your SBF
This post has been beamed to this area by quantum teleportation.
Click to expand...
Click to collapse
I tried everything. When usb-pc in, i see the white led. 5 minutes later the phone enter to bootloader mode. Low Battery, Cant program error messages flashing. After 2 minutes the phones say "OK" and RSD lite recognize the phone! BUT! I cant do the whole flashing process, because 3 minutes later the phone shut down. If i wait to charge more in the bootloader more, its still shut down in 3 minutes.
I try to shut down the device everytime if its enter to bootloader, to charge more, but after 8 hours doing this, its still "low battery".
XianHuen said:
I tried everything. When usb-pc in, i see the white led.
[...]
I try to shut down the device everytime if its enter to bootloader, to charge more, but after 8 hours doing this, its still "low battery".
Click to expand...
Click to collapse
I think, we are at a point at which we are running in circles, my friend.
You tried just everything to reanimate your phone.
You must check your battery in ANOTHER device or load it in ANOTHER external charger to be sure that it's okay. Not in your phone and not in your PC.
If the battery charges well, then your phone is either physically damaged or bricked.
(Service Center needed)
Otherwise, if it's (battery) just charging fine and your phone boots up, first flash stock SBF and then flash what you want to.
If the battery isn't charging in that OTHER charger, then you know, you have to buy a new one.
Another thought, not very likely, but maybe your phone is damaged by overclocking/heat and suffers due to this under those permanent blackouts?
Bottom line is: you need another Defy with another battery to find out for yourself to solve your problem.
Unfortunately there is no wizardry
Question:
Is it necessary to go to boot loader for charging?
(I'm not sure about that.)
As a try, just let the phone off connected to power for a couple of hours.
__________
This post has been beamed to this area by quantum teleportation.
Thank you!
I flashed 4.5.3-109-fixed.sbf and i GOT MOTOROLA BOOT LOGO! but always bootloop.
Now, if i flash DEFYPLUS_U3_4.5.1-134_DFP-231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf.gz
its okay? And i get fully working rom? (i know its defy+ but with the fixed sbf its partially working)
Glad to read that. This is good news :highfive:
Nope, unfortunately you won't get it running with a Defy+ SBF without having trouble/more work on your side.
Better download a MB525 SBF playing the game save. But it's your very own decision.
First see here (Maybe you already know all this stuff):
http://forum.xda-developers.com/showthread.php?t=1216982
Then, after lots of reading, swearing and understanding read on here:
http://forum.xda-developers.com/showthread.php?t=966537
_________________________________
Okay, I would take one of the MB525 SBFs from the "Android 2.2.2 "Froyo" section (3.4.2... or 3.4.3...)
NOT any Chinese SBF = no go!
But watch out for your Bootloader version (BL5, BL6) and your type of camera (red or green lense).
After flashing your stock ROM/SBF and the initial rooting, I would first make a NANDROID backup (CWM Custom Recovery) to have a clean ground.
Then I would first flash the stable CM7.2.0 and also do a NANDROID backup (CWM Custom Recovery) to have a solid home base for playing around.
Finally I would flash the latest Nightly of CM10 02.11. + Update from 07.11. completed with gapps minimal or gapps signed from 2012.10.11 (Google apps Android 4.1.2)
Much work to do for you, but remember: Even the longest way starts with only one little first step.
:fingers-crossed:
Hello and happy holidays!
I have recently bought a Defy+ and i wanted to root after about 2 weeks of use mostly for removing some bloadware and killing ads and more thingies...
As you can guess from this thread title i freaking bricked it...
So let me tell you what i have done until now.
A)I followed this one
http://www.ozbargain.com.au/node/82806
so i can flash it because no program like SuperOneClick was working.
My baseband was somewhere in the mid of these 2 (something like 60 i can't recall anymore)
According to some posts there even another one with my baseband could follow the second procedure
(http://forum.xda-developers.com/showthread.php?t=1595013 ) and end up with a rooted defy+.
I flashed it and was the screen stayed black... Well at the time i could thing that this was bad... I flashed the other 2 and i was waiting in vain...
B) after this complete failure came the funny part... I DONT REMEMBER anything about my stock sbf :angel: ... Seriously it didnt cross my mind to write it down.
So i started trying to flash it with the Unbrick your Defy+ guides.
http://forum.xda-developers.com/showthread.php?t=1828639
Tried the site http://sbf.droid-developers.org/umts_jordanplus/list.php
i even tried this one http://forum.xda-developers.com/showthread.php?t=1820282 in case it had a good effect. Well it hadnt
Until now i am still in the company of a lovely black screen...
MY CONDITION NOW :
RSD 5.6 at first before B step went to 5.9.
1) Insert battery = black screen
2)Power button = black screen
3)Power button pressed with VOL + or - , insert battery = black screen!
4)My pc (win7) finds the phone + White Led
5)RSD detects it cause i can flash it. (about 10 times now...)
6)Phone can be charged (Thank you God)
7)Every single one sbf goes Finished- PASS...
Some more information.
- I am from Greece and the Rom used Greek(localization stuff)
- The Rom had Blur (God Damn it)
- Android was 2.3.6
/EDIT
-RSD report that i have Bootloader version v0x000910 on phone...
Android Play store reports my Defy+ as "Vodafone Motorola MB526". (Should i go for Vodafone singed packages?)
I have read almost any thread for the broken Defy+ but the real problem is that i can not recall my stock sbf
And the questions from here...
a) Is there a way to see my bootloader version while in this messed up state? (and does it even matter?)
b) If it was a Vodafone Blur there would some dinstict features i could have seen? ( so i can start flashing vodafone sbf again...)
c) http://sbf.droid-developers.org/umts_jordanplus/list.php has only full sfb right?
d) Suppose i had a v6 sfb,If i tried a higher sfb version wouldnt the phone worked?
e) I have tried all the http://sbf.droid-developers.org/umts_jordanplus/list.php that is Retail Central Europe (GR_SIGN) but i have failed should i tried them again?
-EDIT- (forgot questions after my chrome crashed)
f) Should i try all 2.3.6 Roms from http://forum.xda-developers.com/showthread.php?t=966537
g) DEFYPLUS_U3_4.5.x . This x does it play any role? If anything fails should i try the last chinese one(DFPRC_U_4.5.3) ?
I am sorry for the long post but i am a little at loss here...
Thank you for your time even if you have just read all this and dont know anything
Flash a sbf with the name dfp 231 (bl7)
Wipe data from stock recovery later and you should be good to go
Sent from my MB526 using xda premium
thekguy said:
Flash a sbf with the name dfp 231 (bl7)
Wipe data from stock recovery later and you should be good to go
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Well i tried about 6 sbf with dfp 231. From DEFYPLUS_U3_4.5.1-134_DFP-231_CN that is used for bl7 root (the first one that made the black screen my lovable partner) to British/retail CEE/unknown/ o2 / vodafone /german / nordic and nothing happened. All Finish /pass and all black screen + white led.
RSD report that i have Bootloader version v0x000910 on phone. I hope this can help in some way...
I decided to try all the 2.3.6 sbfs... let's see...
Hm...
i just flashed
DEFYPLUS_U3_4.5.1-134_DFP-312_TMOUK_SIGN_USADEFYEMARAB1B8TMDE011.0R_PDS03C_USAJRDNGIBRTMDE_P029_A033_M008_Service1FF
and phone stuck at reboot manually your phone. and now is dead. Cant connect to pc. nice...
You may have ran out of battery. If the dfp 231 flashing resulted in a black screen after a data wipe then you should try selecting the blank flash option. Also try a different cable. If still there's a problem then it'd reckon it's hardware failure
About the boot loader code, yeah it's fine but unfortunately is no help
Sent from my MB526 using xda premium
enigma9 said:
Hm...
i just flashed
DEFYPLUS_U3_4.5.1-134_DFP-312_TMOUK_SIGN_USADEFYEMARAB1B8TMDE011.0R_PDS03C_USAJRDNGIBRTMDE_P029_A033_M008_Service1FF
and phone stuck at reboot manually your phone. and now is dead. Cant connect to pc. nice...
Click to expand...
Click to collapse
if you dont fix it yet
charge your battery and put this sbf with RSDlite
http://dl.dropbox.com/u/43690836/An...gerbread_2.3.6_4.5.1-134_DFP-231_CEE_CGv7.zip
after you charge the battery check if rsd see your phone when is in OFFmode and flash the sbf in this way
THANK YOU for your time and your responses.
What do you mean blank flash? Its the first time i come across this term.
My speculations was also that i am out of battery so i ordered an external battery charger from ebay just to be sure.( i have seen the mcgyer way but i am afraid to do it cause everything are going south at the moment so just to be sure )
I have also came across the idea of the factory cable. From the threads here in xda there is a user who actually tried one on a defy (MB525) so i am thinking of ordering one of these.
NEW INFO. Android Play store reports my darling dead Defy+ as "Vodafone Motorola MB526". I think i should turn to Vodafone Blur singed packages. What do you think?
vaserbanix said:
if you dont fix it yet
charge your battery and put this sbf with RSDlite
http://dl.dropbox.com/u/43690836/An...gerbread_2.3.6_4.5.1-134_DFP-231_CEE_CGv7.zip
after you charge the battery check if rsd see your phone when is in OFFmode and flash the sbf in this way
Click to expand...
Click to collapse
I download your sbf as i write.
I have some problems with this damn battery. I left it all day plugged in at the pc but it doesnt want to charge. I will leave it for another day and i will go for the result tomorrow after some time in the wall charger.If all fail i will wait for the external wall charger i bought yesterday
enigma9 said:
THANK YOU for your time and your responses.
What do you mean blank flash? Its the first time i come across this term.
My speculations was also that i am out of battery so i ordered an external battery charger from ebay just to be sure.( i have seen the mcgyer way but i am afraid to do it cause everything are going south at the moment so just to be sure )
I have also came across the idea of the factory cable. From the threads here in xda there is a user who actually tried one on a defy (MB525) so i am thinking of ordering one of these.
NEW INFO. Android Play store reports my darling dead Defy+ as "Vodafone Motorola MB526". I think i should turn to Vodafone Blur singed packages. What do you think?
Click to expand...
Click to collapse
you say "blank flash"
ok, i tell phone in OFFmode wich mean phone is stop, out of function
usb cable you can check it with a MAVO device if is good or not
ps.for more succes try a pc with XP system or change the usb port
reinstall the drivers if the pc doesnt see the phone
I will change the usb and i ll reinstall the drivers.
Thank you for the info on the term!
I will wait for the power to charge and i will try again.
And btw, blank flash is to be selected from rsd file flash/flex options
Sent from my MB526 using xda premium
thekguy said:
And btw, blank flash is to be selected from rsd file flash/flex options
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
So i ll choose it before i flash.Ok i ll try it that too.
I am currently waiting my external battery wall charger and my factory cable from ebay.
I used the pc usb charge all night trick and nothing happened... :crying:
So i will wait to charge the battery by normal means and then if this also fails i will try for the factory cable.
Anyone has any thoughts on the factory cable?
Mcgyer trick is the factory cable, using which one can flash without battery
Sent from my MB526 using xda premium
thekguy said:
Mcgyer trick is the factory cable, using which one can flash without battery
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Wait.Factory cable loads directly the bootloader while Mcgwer trick just gives power to the phone.
And i think factory cable its safer when you use it because the phone is actually waits to be given a 5V supply in that pin and there is not a chance of frying anything,
I think... :S
Boot into bootloader "power+vol up"
If battery is down you will read
Battery down cannot progamn"
Charge Battery, flash sbf reboot to stockrecovery(power button + vol down) faktory reset reboot
MB525 red lense
bone101 said:
Boot into bootloader "power+vol up"
If battery is down you will read
Battery down cannot progamn"
Charge Battery, flash sbf reboot to stockrecovery(power button + vol down) faktory reset reboot
MB525 red lense
Click to expand...
Click to collapse
The problem is that i can no longer boot to anything. THE only thing that my defy+ does is the white led when connected to pc. nothing else. nothing at all.
And the battery,power button, vol + or vol - doesnt work with nothing because i can only stare at the blank screen of my defy+...
:crying:
Pull battery out ,Hold vol. Up connect to usb ..push battery in
MB525 red lense
bone101 said:
Pull battery out ,Hold vol. Up connect to usb ..push battery in
e
Click to expand...
Click to collapse
The light goes on for a moment
the i push the battery
nothing happens
@enigma9 try the mygyer trick it just has to work, regardless of almost any issue
Sent from my MB526 using xda premium