Related
Hi,
I am completely new in phone flashing. I met some troubles with my Galaxy Y device.
I will explain the details and hope someone can give me guidelines to fix it.
I have a Galaxy Y that freezes at logo screen when powered up.
We can access Download mode, but not Recovery one.
Initially it had an official rom that has not been modified.
I get trouble with it with a boot loop.
So, I went to Recovery Mode and did a wipe Data. This worked once and then I get boot loop problem 2 days later.
I tried again to wipe data through Recovery mode, but now with out result.
So I decided to flash it … Odin failed and now it stays frozen at the logo screen when powered up.
For the flashing:
- I try on 3 different PC (1 Win7 and 2 XP) and tried different USB ports
- For the drivers, I tried by installing Kies_2.3.3.12085_7_5 and by installing USB drivers only (SAMSUNG_USB_Driver_for_Mobile_Phones.exe)
- I tried a lot of time, with and without restarting Odin
- I tried with Odin 1.83, 1.84 and 1.85 ( I know that 1.84 and 1.85 support S5360 model)
- And I tried using different ROMs
The communication between Odin and the device seems correct (I can see the yellow highlight when connecting the device in Download mode)
I tried some Doky’s packages from here http://forum.xda-developers.com/showthread.php?p=21846620:
- S5360_XXKK6_OXXKK2_XXKK5
- S5360_XXKL3_OXXKL1_XXKL3
- S5360_XXLF3_OXXLF3_XXLF3
I tried also some other packages containing only one file and one dll (retrieved from here as example http://www.tsar3000.com/Joomla/inde...laxy-y-firmwares&catid=55:samsung&Itemid=82):
- S5360XXKL3_LUXKJ1_Luxembourg_Android_2.3.6
- S5360TAJKK3_TLPKK3_Austria_Android_2.3.6
- S5360LUHKJ2_PSNKJ2_Argentina_Personal_Android_2.3.6
- S5360XXLA2_S5360OXXLA2_EUR
- S5360XXKL3_S5360OXXKL1_EUR
I tried also this package, as I saw that some people were able to unbrick there device with it:
GalaxyS5360_DDLA1_2.3.6
This last package contains totoro_0623.pit file. So I tried with and without Re-Partition checked.
I tried also to download totoro_0623.pit file again from other locations and the .pit file with other packages from the previous lists, but without success (Odin always fails).
On point that can be perhaps important is then when flashing, with Odin, the CSC package alone it always succeeds.
The same, when flashing only BOOT package (taken from GalaxyS5360_DDLA1_2.3.6), is it always successful.
I tried also to flash different couples of BOOT and CSC packages and it is always successful.
Unfortunately, I am completely new in this domain and I do not know the purpose of each package (BOOT, PDA, MODEM and CSC).
So, I do not know what to do now ... Perhaps someone can have some advices or guidelines to help.
Thanks again.
Yacy.
refer to youtube watch with video TUT
yabyuh22 said:
refer to youtube watch with video TUT
Click to expand...
Click to collapse
Thank you very much, Tabyuh22, for your advice.
Unfortunately, I did a lot of search already (xda forum and google), but unfortunately without success.
The only unbrick tutorial I found, related to Galaxy Y, is flashing GalaxyS5360_DDLA1_2.3.6 packages with Odin. I tried this already, but unfortunately, it was not successful (Odin flash fails, except if I flash, BOOT and CSC packages only, as explained previously).
Perhaps you have in mind a specific link that I can try?
Thanks again.
Yacy.
Most probably, the Odin you downloaded is a corrupt one, or maybe you're using an older version. Try the one from Doky73's thread.
sorry but i believe its the Odin,
try the v1.85 and do not use a pit file,
very well detailed question,
thanks
can you post screenshot for odin after "Fail" and/or all text in Message area
and I will help I've unbricked my phone just today
Thank you very much for your advice and help.
In fact, I tried already to download Odin 1.85 from different sources. I just tried again, but unfortunately I get the same bad result.
What I find strange is that the flash is successful when using the CSC package only.
I do not know how to put images in the post, so I attached 2 .jpg snapshots of Odin failure and success.
Here is Odin's log when failure (when trying to flash PDA, MODEM and CSC packages):
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_XXLF3.tar.md5 is valid.
<OSM> MODEM_S5360_XXLF3.tar.md5 is valid.
<OSM> CSC_S5360_OXXLF3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
And here is Odin's log when success (when trying to flash CSC package only):
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_XXLF3.tar.md5 is valid.
<OSM> MODEM_S5360_XXLF3.tar.md5 is valid.
<OSM> CSC_S5360_OXXLF3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> csc.rfs
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
Thanks again for your help.
Yacy
Just choose PDA and It's required file and live Phone and CSC alone then you'l be able to boot into Recovery mod
Mohamed.Anwar said:
Just choose PDA and It's required file and live Phone and CSC alone then you'l be able to boot into Recovery mod
Click to expand...
Click to collapse
It seems it is what I did. The result is in the Failed snapshot I attached.
Do you see any thing wrong in this snapshot and the associated logs?
(I tried also to flash PDA or PHONE alone, but failed. It is successful only if I flash CSC alone)
Thanks again.
Yacy.
Try data/cache wipe after flash,maybe it helps
MANY GREEEEETZ!!!
Alright, now when you downloaded the firmware package, there would be 4 different .tar files - BOOT_something.tar, PDA_something.tar, CSC_something.tar and MODEM_something.tar. Sometimes, there is one more, DefaultCalDataBOOT_something.tar, which i use in place of BOOT. Try flashing that in place of BOOT file. Still if it dosen't work, flash the PIT file along. Make sure the PIT's right. Our device's pit is "totoro_0623.pit".
CALIBAN666 said:
Try data/cache wipe after flash,maybe it helps
Click to expand...
Click to collapse
I imagine we can do this only by accessing Recovery Mode.
Unfortunately, I cannot access this mode, but the Download one only
anasdcool71 said:
Alright, now when you downloaded the firmware package, there would be 4 different .tar files - BOOT_something.tar, PDA_something.tar, CSC_something.tar and MODEM_something.tar. Sometimes, there is one more, DefaultCalDataBOOT_something.tar, which i use in place of BOOT. Try flashing that in place of BOOT file. Still if it dosen't work, flash the PIT file along. Make sure the PIT's right. Our device's pit is "totoro_0623.pit".
Click to expand...
Click to collapse
The only package I get containing BOOT file is GalaxyS5360_DDLA1_2.3.6. This package contains:
- BOOT_S5360DDLA1_REV05.tar.md5
- DefaultCalDataWithBoot_S5360DDLA1_REV05.tar.md5
-PDA_S5360DDLA1_REV05.tar.md5
-MODEM_S5360DDLA1_REV05.tar.md5
-GT-S5360-MULTI-CSC-ODDLA1.tar.md5
Flashing BOOT_S5360DDLA1_REV05.tar.md5 alone is successful and here is Odin’s log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOT_S5360DDLA1_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> BcmBoot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
Flashing DefaultCalDataWithBoot_S5360DDLA1_REV05.tar.md5 alone fails and here is Odin’s log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5360DDLA1_REV05.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> BcmBoot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> HEDGE_NVRAM8_RF_LE.bin
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Selecting totoro_0623.pit alone fails and here is Odin’s log:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
The remark when flashing DefaultCalDataWithBoot_S5360DDLA1_REV05.tar.md5 alone, I can see on the device the progress bar increasing, but it fails before the end.
(I do not have this at all when trying to flash PDA or MODEM files)
Thanks again.
Yacy.
Possible solution : That what I did
Keep ODIN alive don't close it then try changing USB ports and use man ports ( in the back if you're using Desktop PC ) and flash only pit and PDA if it didn't worked restart download mode
then check if you could boot into Recovery mod
Flash some kernel.tar in place of PDA file....
Then you'll be able to boot into recovery and then install any rom ....!!!!
Sorry for the late answer, as I was not available these days.
And thank you for your guide lines.
Mohamed.Anwar said:
Possible solution : That what I did
Keep ODIN alive don't close it then try changing USB ports and use man ports ( in the back if you're using Desktop PC ) and flash only pit and PDA if it didn't worked restart download mode
then check if you could boot into Recovery mod
Click to expand...
Click to collapse
I tried this operation again many times, but I always get flash failure
The_animaToR said:
Flash some kernel.tar in place of PDA file....
Then you'll be able to boot into recovery and then install any rom ....!!!!
Click to expand...
Click to collapse
I had a look to the Development area and tried to flash different kernels.
Unfortunately, I get failures again.
What is different now is that
1/ Odin hangs at the steps below:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
Click to expand...
Click to collapse
2/ In the phone, “custom bin down” counter is now uncremented.
Its value is 10 (it was zero, before trying to flash kernels from custom roms).
Do you have any other idea?
Does an alternative tool to flash the device exist?
Is there a way (perhaps by using Android design tools) to get more information about why the flash does not work (a more precise error message)?
Thanks again for your help.
Yacy.
Hi try this one ,hope it helps
denniz05 said:
Hi try this one ,hope it helps
Click to expand...
Click to collapse
Hello Yacy, I'm sorry I have no Idea about your problem. I just wanted to ask if you got your issue solved?
Actually, I bought my SGY about 3 weeks ago and I was going through problems of Flashing. I'm also interested in Flashing with a Custom ROM.
And I'm Totally new to Android. If you got the problem sorted out, can you tell me a DETAILED and CLEAR TUT for flashing one?
asd
please give me a link about galaxy y duos bricked please.
yacy said:
Hi,
I am completely new in phone flashing. I met some troubles with my Galaxy Y device.
I will explain the details and hope someone can give me guidelines to fix it.
I have a Galaxy Y that freezes at logo screen when powered up.
We can access Download mode, but not Recovery one.
Initially it had an official rom that has not been modified.
I get trouble with it with a boot loop.
So, I went to Recovery Mode and did a wipe Data. This worked once and then I get boot loop problem 2 days later.
I tried again to wipe data through Recovery mode, but now with out result.
So I decided to flash it … Odin failed and now it stays frozen at the logo screen when powered up.
For the flashing:
- I try on 3 different PC (1 Win7 and 2 XP) and tried different USB ports
- For the drivers, I tried by installing Kies_2.3.3.12085_7_5 and by installing USB drivers only (SAMSUNG_USB_Driver_for_Mobile_Phones.exe)
- I tried a lot of time, with and without restarting Odin
- I tried with Odin 1.83, 1.84 and 1.85 ( I know that 1.84 and 1.85 support S5360 model)
- And I tried using different ROMs
The communication between Odin and the device seems correct (I can see the yellow highlight when connecting the device in Download mode)
I tried some Doky’s packages from here http://forum.xda-developers.com/showthread.php?p=21846620:
- S5360_XXKK6_OXXKK2_XXKK5
- S5360_XXKL3_OXXKL1_XXKL3
- S5360_XXLF3_OXXLF3_XXLF3
I tried also some other packages containing only one file and one dll (retrieved from here as example http://www.tsar3000.com/Joomla/inde...laxy-y-firmwares&catid=55:samsung&Itemid=82):
- S5360XXKL3_LUXKJ1_Luxembourg_Android_2.3.6
- S5360TAJKK3_TLPKK3_Austria_Android_2.3.6
- S5360LUHKJ2_PSNKJ2_Argentina_Personal_Android_2.3.6
- S5360XXLA2_S5360OXXLA2_EUR
- S5360XXKL3_S5360OXXKL1_EUR
I tried also this package, as I saw that some people were able to unbrick there device with it:
GalaxyS5360_DDLA1_2.3.6
This last package contains totoro_0623.pit file. So I tried with and without Re-Partition checked.
I tried also to download totoro_0623.pit file again from other locations and the .pit file with other packages from the previous lists, but without success (Odin always fails).
On point that can be perhaps important is then when flashing, with Odin, the CSC package alone it always succeeds.
The same, when flashing only BOOT package (taken from GalaxyS5360_DDLA1_2.3.6), is it always successful.
I tried also to flash different couples of BOOT and CSC packages and it is always successful.
Unfortunately, I am completely new in this domain and I do not know the purpose of each package (BOOT, PDA, MODEM and CSC).
So, I do not know what to do now ... Perhaps someone can have some advices or guidelines to help.
Thanks again.
Yacy.
Click to expand...
Click to collapse
hey just see http://forum.xda-developers.com/showthread.php?t=1465800
Hi guys,
My SGS4 won't boot anymore. At all.
I can (with difficulty) access my custom recovery menu (TWRP 2.5.1) and the download menu.
But whatever I'm trying to flash using ODIN from download menu, it fails! Whether it's the current ROM, official UK BTU ROM, stock recovery etc... So can't use Odin.
Can't put anything on the device either as I can't boot. When I use the "mount USB" from the TWRP menu, my PC doesn't recognize the phone so I can't put any ZIP on the phone that I could install from TWRP.
This happened when I used Triangle Away to reset the counter from 1 to 0....
I'm afraid my phone is bricked (although it's a temp phone and will be getting mine in 2 days), but I wanted to be sure that I didn't forget to do anything....
ANy ideas how to make this work pls?
thnx
vivelafrance said:
Hi guys,
My SGS4 won't boot anymore. At all.
I can (with difficulty) access my custom recovery menu (TWRP 2.5.1) and the download menu.
But whatever I'm trying to flash using ODIN from download menu, it fails! Whether it's the current ROM, official UK BTU ROM, stock recovery etc... So can't use Odin.
Can't put anything on the device either as I can't boot. When I use the "mount USB" from the TWRP menu, my PC doesn't recognize the phone so I can't put any ZIP on the phone that I could install from TWRP.
This happened when I used Triangle Away to reset the counter from 1 to 0....
I'm afraid my phone is bricked (although it's a temp phone and will be getting mine in 2 days), but I wanted to be sure that I didn't forget to do anything....
ANy ideas how to make this work pls?
thnx
Click to expand...
Click to collapse
where odin failed exactly?
did you try changing usb port? kies totally disabled? original usb cable?
thnx for your help.
- Kies is definitely not running, stopped all services and processes
- Using samsung USB cable
- Tried on several USB ports of my PC
- Using Odin 3.4
- this is what I can read in ODIN after it has failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDD_I9505VODAMD9_I9505XXUAMDD_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Thnx again.
vivelafrance said:
thnx for your help.
- Kies is definitely not running, stopped all services and processes
- Using samsung USB cable
- Tried on several USB ports of my PC
- Using Odin 3.4
- this is what I can read in ODIN after it has failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDD_I9505VODAMD9_I9505XXUAMDD_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Thnx again.
Click to expand...
Click to collapse
one more thing, remove battery for a couple of minutes, then try with odin 1.85
All of these were really good ideas, but I'm afraid none of them work!
Same error message, it seems it can't write on the damn phone. I tried to reflash TWRP, the green bar went further but at the end, same thing, fails.
vivelafrance said:
All of these were really good ideas, but I'm afraid none of them work!
Same error message, it seems it can't write on the damn phone. I tried to reflash TWRP, the green bar went further but at the end, same thing, fails.
Click to expand...
Click to collapse
i dont know if flashing pit file along with the firmware will work
yeah that's exactly what I was thinking, after clickingon your "unroot, back to stock" link in your signature...
So can I flash the firmware + Pit at the same time or should I flash pit first and then the ROM?
vivelafrance said:
yeah that's exactly what I was thinking, after clickingon your "unroot, back to stock" link in your signature...
So can I flash the firmware + Pit at the same time or should I flash pit first and then the ROM?
Click to expand...
Click to collapse
pit file is flashed with the firmware. choose the right pit for your device! re-partition will be checked automatically when you select the pit file.
still doesn't work unfortunately, don't know what 's happening....
I flashed PIT file alone, it worked fine.
Tried to install anything else, it fails again, all the time...
vivelafrance said:
still doesn't work unfortunately, don't know what 's happening....
I flashed PIT file alone, it worked fine.
Tried to install anything else, it fails again, all the time...
Click to expand...
Click to collapse
did you flash firmware with the pit file at same time and didnt work?
almost you did everything.
try to change computer if available.
no I flashed the pit file alone, cause if I flash the pit and PDA at the same time, it doesn't work either:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAME2-PRE-ROOTED-DEODEX-SUPER-SLIM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
ok well, thnx anyway for your help
vivelafrance said:
no I flashed the pit file alone, cause if I flash the pit and PDA at the same time, it doesn't work either:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAME2-PRE-ROOTED-DEODEX-SUPER-SLIM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
ok well, thnx anyway for your help
Click to expand...
Click to collapse
If you haw acess t dawnload mod you are nhot bricked pleas go and try other pc
Sent from my GT-I9505 using xda premium
First, thanks for the info that if I can access the download mode, then the phone is not bricked, I didn't know that, so thanks.
And yes, you were both right, I plugged my phone into my laptop and it worked! THANK YOU.
So the next question is: What could be the issue on my PC? It's not Kies cause it's not installed, and I already uninstalled and reinstalled the Samsung Drivers....
thnx
this is surely NOT a mobile issue if you can enter into download mode.
i had the exact issue a month ago when i had note2.
if you can't try it on another pc, try :
1) uninstall skies completely
2) unisnstall usb drivers
3) reboot the pc
4) connect your s4 in download mode to your pc.
5) let your pc install freah usb drivers
6) start odin and flash
7) if still you get the same error download a different verison of the official rom and try flashing.
i followed the above procedure couple of times and was finally able to install the rom. the issue is either with the drivers or the rom.
Sent from my GT-I9500 using xda app-developers app
bricked for sure
vivelafrance said:
First, thanks for the info that if I can access the download mode, then the phone is not bricked, I didn't know that, so thanks.
And yes, you were both right, I plugged my phone into my laptop and it worked! THANK YOU.
So the next question is: What could be the issue on my PC? It's not Kies cause it's not installed, and I already uninstalled and reinstalled the Samsung Drivers....
thnx
Click to expand...
Click to collapse
expirienced exactly same situation with i9300. Able to get to recovery but failed to flash. Tryed everything on PC and on the phone itself. You have to try different odin versions, but in my case it was NAND failure. If you failed to flash PIT your phone is for sure bricked. Sorry.
Got mainboard replacement in my case.
Have you tried putting a rom on the sdcard with an adapter.. And then put it in the phone and flash the zip from recovery?
Sent from my GT-I9505 using xda app-developers app
Bluetoth10 said:
expirienced exactly same situation with i9300. Able to get to recovery but failed to flash. Tryed everything on PC and on the phone itself. You have to try different odin versions, but in my case it was NAND failure. If you failed to flash PIT your phone is for sure bricked. Sorry.
Got mainboard replacement in my case.
Click to expand...
Click to collapse
thnx. yeah, flashing the PIT actually always worked but it was the only thing that worked! lol
DenmarkRootN00b said:
Have you tried putting a rom on the sdcard with an adapter.. And then put it in the phone and flash the zip from recovery?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
no but good idea. Actually all the flashing work now, but I still can't boot into the phone! This is madness...
before I couldn't flash anything. Now, I flashed the original BTU ROM, Stock recovery but can't boot into recovery anymore, can't boot into the OS, the only thing that works is the download mode.
Will try to get the phone to a repair thing. I'm gonna try with samsung repair centre first cause the right ROM is installed (original) and the counter is at zero so should be fine with warranty.
vivelafrance said:
no but good idea. Actually all the flashing work now, but I still can't boot into the phone! This is madness...
before I couldn't flash anything. Now, I flashed the original BTU ROM, Stock recovery but can't boot into recovery anymore, can't boot into the OS, the only thing that works is the download mode.
Will try to get the phone to a repair thing. I'm gonna try with samsung repair centre first cause the right ROM is installed (original) and the counter is at zero so should be fine with warranty.
Click to expand...
Click to collapse
good luck at least i just thought it would work by doing it in recovery but yeah... warranty is better.. if not.. then keep trying if they wont replace it
ok I FINALLY could access the stock recovery, did a full wipe and everything is back in order now, works perfectly.
THANKS to all!
I still have TWRP running but I cant install anything from the micro-sd card. Before I started I used twrp for a backup it showed that it made a backup well I trusted it and didn't go look on sd card to see if it was there my mistake its not there, then I tried going with another rom I downloaded Super_S4_Odexed_NAE_v1.5.zip well it wasn't working so then i downloaded Stock-MDL-Stable-spr-TW.zip( its supposed to help for the rom downloaded) and loaded it on my sd card with my pc well i put micro-sd card in phone and it wont read it so I can install with twrp I also tried odin with stock mdl.tar and it fails, so what I need to know is how to start over with wipe and get something i need so it will read at boot up( do i need a bootloader?)and my files from sd card it reads all but my downloaded zip files
my system is a Sprint Samsung Galaxy S4
original stock was L720VPUAMDC.tar
I get this from Odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Flash back MDC tar, it's the best base.
Sent from my SM-N900P
dr.faramroze said:
Flash back MDC tar, it's the best base.
Sent from my SM-N900P
Click to expand...
Click to collapse
I get this from Odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Have you tried heimdall or one click unbrick tool
Howiewowie said:
I get this from Odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Have you tried heimdall or the one click unbrick tool? One click unbrick is based on heimdall. Please try this. http://forum.xda-developers.com/showthread.php?t=1153310
ashikrobi said:
Have you tried heimdall or the one click unbrick tool? One click unbrick is based on heimdall. Please try this. http://forum.xda-developers.com/showthread.php?t=1153310
Click to expand...
Click to collapse
it does not read my Samsung it does not show in the list and I do have drivers installed on my pc
Howiewowie said:
it does not read my Samsung it does not show in the list and I do have drivers installed on my pc
Click to expand...
Click to collapse
Download heimdall package. You will get driver in that package.
ashikrobi said:
Download heimdall package. You will get driver in that package.
Click to expand...
Click to collapse
it fails to install the driver i tried everything on resolution center also
Howiewowie said:
it fails to install the driver i tried everything on resolution center also
Click to expand...
Click to collapse
I have got this but it wont boot up
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltespr-jfltespr-sphl720.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Howiewowie said:
I have got this but it wont boot up
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltespr-jfltespr-sphl720.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Were you successful flashing the stock rom? If yes, try factory reset from recovery. You said you failed to install heimdall driver. What is the problem? Please try to run one click unbrick tool. It's easy and will guide you. You need java to use it.
ashikrobi said:
Were you successful flashing the stock rom? If yes, try factory reset from recovery. You said you failed to install heimdall driver. What is the problem? Please try to run one click unbrick tool. It's easy and will guide you. You need java to use it.
Click to expand...
Click to collapse
I was not successful flashing stock rom look above my root rom flash it failed and how can it install the unbrick tool when pc doesn't read my phone when I know my samsung drivers are on the hdd it will not even show it listed on other devices
Howiewowie said:
I was not successful flashing stock rom look above my root rom flash it failed and how can it install the unbrick tool when pc doesn't read my phone when I know my samsung drivers are on the hdd it will not even show it listed on other devices
Click to expand...
Click to collapse
Can you please upload screenshots? I do not understand, your screenshot shows odin detects your device. What really happens when you connect your device to pc?
Have you tried ##3424# menu to enable samsung diag port? Is it requesting to install qhsusb_dload driver when you connect it to pc?
i still don't get why you can't install from SD card. are you saying TWRP isn't reading from the SD card? have you tried a different memory card? because you could of just updated the recovery to a different recovery. from my experience, CWM seems to be the most dependable recovery to use.
in any case, i don't understand what you mean your PC won't detect the phone if you're able to use odin..
one other suggestion is to try using adb push to push a files from your pc directly to the phone memory. here's how to do it http://forum.xda-developers.com/showthread.php?t=2266638
Howiewowie said:
I still have TWRP running but I cant install anything from the micro-sd card. Before I started I used twrp for a backup it showed that it made a backup well I trusted it and didn't go look on sd card to see if it was there my mistake its not there, then I tried going with another rom I downloaded Super_S4_Odexed_NAE_v1.5.zip well it wasn't working so then i downloaded Stock-MDL-Stable-spr-TW.zip( its supposed to help for the rom downloaded) and loaded it on my sd card with my pc well i put micro-sd card in phone and it wont read it so I can install with twrp I also tried odin with stock mdl.tar and it fails, so what I need to know is how to start over with wipe and get something i need so it will read at boot up( do i need a bootloader?)and my files from sd card it reads all but my downloaded zip files
my system is a Sprint Samsung Galaxy S4
original stock was L720VPUAMDC.tar
I get this from Odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
edit:
Are you running Odin 1.85 or 3.09?
Are you running Odin as administrator?
The computer does see your phone, so that isn't the issue.
What version of Stock S4 were you running prior to flashing Super_s4?
If it was KitKat 4.4 then you'll need to download stock 4.4 from samsung, you cannot downgrade back to 4.2 or 4.3 if your phone came as stock 4.4, sorry.
When you are booting to download mode, are you doing it from a full powered off state? Make sure the phone is fully powered down, even pull the battery and let it sit for a minute or two before you boot to download mode.
What version of twrp did you flash? Versions older than 2.7.0.1 have problems flashing kitkat roms. As an earlier poster suggested, go get CWM 6.0.4.4 (IIRC) or the newest Philz touch and try flashing from that.
Do you have a card reader and a micro-sd to sd adapter you can use on your pc, or maybe a USB-OTG adapter? If so, make sure whatever ROM you want to flash is on the root of the SD card. I have both, and I keep an old spare 2GB micro sd formatted ex-fat that I can quickly format again and copy any ROM to if I need to flash, and if that doesn't work or I can't find it, I have a USB-OTG cable and I'll use any thumb drive I may have sitting around to copy a ROM and flash that way.
wilzard said:
edit:
Are you running Odin 1.85 or 3.09?
Are you running Odin as administrator?
The computer does see your phone, so that isn't the issue.
What version of Stock S4 were you running prior to flashing Super_s4?
If it was KitKat 4.4 then you'll need to download stock 4.4 from samsung, you cannot downgrade back to 4.2 or 4.3 if your phone came as stock 4.4, sorry.
When you are booting to download mode, are you doing it from a full powered off state? Make sure the phone is fully powered down, even pull the battery and let it sit for a minute or two before you boot to download mode.
What version of twrp did you flash? Versions older than 2.7.0.1 have problems flashing kitkat roms. As an earlier poster suggested, go get CWM 6.0.4.4 (IIRC) or the newest Philz touch and try flashing from that.
Do you have a card reader and a micro-sd to sd adapter you can use on your pc, or maybe a USB-OTG adapter? If so, make sure whatever ROM you want to flash is on the root of the SD card. I have both, and I keep an old spare 2GB micro sd formatted ex-fat that I can quickly format again and copy any ROM to if I need to flash, and if that doesn't work or I can't find it, I have a USB-OTG cable and I'll use any thumb drive I may have sitting around to copy a ROM and flash that way.
Click to expand...
Click to collapse
its ok now I took my SGS4 back to Sprint they said they cant figure it out so they are giving me a brand new S4 my phone kinda burned out the screen was turning green on boot up well my insurance covered it thanks for the help
Yeah, he wasn't on MDC. The fail point he was getting meant he already had the knox bootloader.
Hi
Hoping someone can help me I have followed the guide to root my s5 device exactly several times and it fails everytime. USB Debugging is enabled, USB Drivers are installed and Kies isnt installed on my pc, this is guide i followed:
Step 1: Download CF-Auto-Root package and Odin v3.09. Then, extract the files to the computer.
Step 2: Boot the Galaxy S5 in Download mode by pressing and holding down the Volume Down, Home and Power buttons together. When a warning screen is displayed, press the Volume Up button to enter Download mode.
Step 3: Now, run Odin3 v3.09.exe as an Administrator and then connect the Galaxy S5 to the PC via USB cable. If connected successfully, a message showing “Added!!” will appear in Odin’s message box, if not, try another USB port. If the issue persists, try reinstalling the USB driver.
Step 4: Click on the AP button, and select the CF-Auto-Root file (a .tar.md5 file), which was extracted in Step 1.
Step 5: In Odin, make sure that the “Auto Reboot” and “F. Reset Time” options are checked while “repartition” is unchecked.
Step 6: Click on the Start button in Odin to begin the flashing process.
Step 7: After the process is complete, the Galaxy S5 will restart and a PASS message with green background will appear in the left-most box at the top of Odin.
I have tried this 5 times and it isnt working fails every time any ideas why this isnt working. I am not an expert at this so if I missed anything please let me know any help would be great
Here is log from odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-klte-kltexx-smg900f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Try again with Odin 3.7
No, stick with Odin 3.09.
Odin is tempermental, sensitive to timing and USB configurations. Try a different USB cable and USB port. And ensure that you have temporarily turned off any firewall, antivirus or malware scanning programs. If the problem persists, try reverting to a full stock firmware to eliminate a lot of variables and have a stable OS before proceeding to root your phone.
At face value, the Odin error message implies that your recovery partition is corrupt. That could mean that you are trying to reroot a phone that has already been rooted, that your root was incomplete or that you had a bad Odin write, that Knox is interfering or any number of other causes. You could reduce the variables even more by writing the proper PIT file to your phone concurrently with a flash to stock firmware. Do try a different USB cable and USB port.
And critically, ensure that you are entering download mode by removing the phone battery, replacing it, then using the volume down + home + power sequence. If the first write attempt fails, do not close the Odin screen. Instead pull the battery again, then enter download mode again and then click write for the second attempt. Ensure that you don't close the Odin screen between the two write attempts.
.
Got this resolved turned out reactivation lock was enabled in security settings turned this off and root was successful after this, thanks for the help tho
galaxy s5 root
Hi
I installed android 5.0 lollipop on my galaxy s5 ( SM-G900F ) since there i am trying to root my phone in order to delete all pre loaded apps that i don't use
But every time i try i fail,
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-klte-kltexx-smg900f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I already reed the last few posts but i still don't understand how to root my phone
tiagooliveira95 said:
I already reed the last few posts but i still don't understand how to root my phone
Click to expand...
Click to collapse
Have you tried Towelroot? I thought that worked for all of the S5 phones...
Hi
I was having the same problem as you.
Just tried this option: http://forum.xda-developers.com/galaxy-s5/general/how-to-root-triggering-knox-2nd-method-t2843044
Just give it a try...
hey
can u give me a link with thath problem I have it to
graemek said:
got this resolved turned out reactivation lock was enabled in security settings turned this off and root was successful after this, thanks for the help tho
Click to expand...
Click to collapse
omg you hero
I was trying out this rom(my first)
http://forum.xda-developers.com/showpost.php?p=60178468&postcount=9684
and now it won't reboot.
BACKUP your data to external storage
REMOVE external SD card
DOWNLOAD N900V_JasmineROM_v5.0.zip to internal storage & CHECK MD5
REBOOT to Safestrap recovery
DELETE all ROM slots & make Stock Slot active
WIPE everything (system/data/cache/dalvic)
FLASH N900V_JasmineROM_v5.0.zip - BE PATIENT !
MAKE SURE THE ABOVE STEP HAS BEEN SUCCESSFULY COMPLETED !
REBOOT to Download mode
DOWNLOAD N900VVRUEOB6_PartialFirmware.tar.md5.7z to your PC & CHECK MD5
EXTRACT N900VVRUEOB6_PartialFirmware.tar.md5 using 7-Zip
FLASH N900VVRUEOB6_PartialFirmware.tar.md5 via Odin in AP slot
REBOOT to Stock recovery (press and hold Home + Power + Volume Up)
RESET factory by selecting "wipe data/factory reset"
REBOOT to System & Enjoy!
I followed these directions except for when I got to "DELETE all ROM slots & make Stock Slot active" it wouldn't work so I googled how to use safestrap and I found I had to make a rom and make that active. So maybe that's where it went wrong. I don't know. Please help!
I can still get into system recovery but I'm not sure what to do.
My phone is the SM-N900v
I had android 4.4.2
I'm trying to Odin back to stock using the following
http://forum.xda-developers.com/showthread.php?t=2483380
with
RETAIL Locked N3 Restore Files
Official VRUCNC4 4.4.2
But it keeps failing . On my phone I get:
SECURE DOWNLOAD: ENABLE
UDC: START
SW REV CHECK FAIL: [aboot]Fused 4 > Binary 3
On Odin I get this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help!
you cannot go back to 4.4.2 if you went with jasmine 5.0 you can not go back. either you find a work around trying to boot jasmine 5.0 or you go back to 4.4.4 and you will not have root cause there is no root method
did you install on stock rom slot when install jasmine?
Did you factory reset after flashing ?
need fix
Did you ever find a fix for this? I also had jasminerom installed on my Verizon note 3 and tried installing a KK rom and can't escape from a soft-brick. I am completely lost and can't find anything with a search.
newsom96 said:
Did you ever find a fix for this? I also had jasminerom installed on my Verizon note 3 and tried installing a KK rom and can't escape from a soft-brick. I am completely lost and can't find anything with a search.
Click to expand...
Click to collapse
There is no "fix"...you can not downgrade from 5.0 to anything except 4.4.4
Sent from my Note 3 via Tapatalk