Related
Like title says I've tried all the apns I found on Google . also different basebands . when I try a Att baseband I only get g data speeds . when I try a p936 baseband I get only edge speeds. I've checked the frequencies and I should be getting hsdpa speeds .
I can access the lg hidden menus where u can seket frequencies no luck . there's other options but I don't know what they do. Maybe someone here can recommend what to change
Sent from my LG-P930 using xda app-developers app
Another list of options
Sent from my LG-P930 using xda app-developers app
The P930 is At&t's model and should get 3G, 4G and even LTE. The P936 is an international model that will only get EDGE/2G on At&t since it doesn't have compatible bands for anything else.
OK thanks
Sent from my LG-P930 using xda app-developers app
please tell me how I would know I see the network frequency gsm 3g and I am connected in nexus 4 lg e960? I thank the attention of all of you!
secret code service menu not funtional 3845*#960# and 1809... , 2945... , my msl, and other
The secret dialer codes aren't universal. And are you asking how to see what frequency band as in 1900, 2100, etc the tower is using?
Sent from my Nexus 4 using xda app-developers app
This is useful if you have a weak LTE signal or just don't need it always on. I found this tutorial on a different website for another galaxy phone and it works on the Note 3.
1. Turn off your phone and take out your sim card.
2. Turn on your phone with no sim card and wait a minute or two for it to turn on and settle down.
3. Go to the dialer and dial *#2263#
You should see a menu with band selections. The current setting is "Automatic".
(You have to use the menu key to select your options by using "Key Input" to type the number you want)
If you switch to "GSM All", you will be EDGE (2G).
If you switch to "WCDMA All", you will be on HSPA+ (3G, though AT&T and others call it 4G).
4) Power off the phone again and put your sim card back. Upon reboot you should see your new setting in effect.
I get a service mode that says rat selection is restricted...
However *#*#4636#*#* will allow you to select whatever band you so choose. Although lte only doesn't allow voice calls
Sent from my SAMSUNG-SM-N900A using xda app-developers app
inmotion said:
I get a service mode that says rat selection is restricted...
However *#*#4636#*#* will allow you to select whatever band you so choose. Although lte only doesn't allow voice calls
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
If your sim card is out when trying to access the menu it shouldn't say restricted.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
mazdamiata210 said:
If your sim card is out when trying to access the menu it shouldn't say restricted.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Good catch, I completely missed that part of the write up
inmotion said:
I get a service mode that says rat selection is restricted...
However *#*#4636#*#* will allow you to select whatever band you so choose. Although lte only doesn't allow voice calls
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
I tried the above on my S4 and couldn't get LTE back was stuck on wcdma preferred. Google resulted in a ton of information. Ultimately hard reset needed.
Sent from my SM-N900T using Tapatalk 4
inmotion said:
I get a service mode that says rat selection is restricted...
However *#*#4636#*#* will allow you to select whatever band you so choose. Although lte only doesn't allow voice calls
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Yeah that code doesn't work for me. It never worked for my note 2 or note 1 so I wouldn't recommend doing it.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Limeybastard said:
I tried the above on my S4 and couldn't get LTE back was stuck on wcdma preferred. Google resulted in a ton of information. Ultimately hard reset needed.
Sent from my SM-N900T using Tapatalk 4
Click to expand...
Click to collapse
Sorry about your luck with it, I've never had a problem using it to switch between lte, wcdma, or gsm on my s4 or this note 3. Weird...
Sent from my SAMSUNG-SM-N900A using xda app-developers app
inmotion said:
Sorry about your luck with it, I've never had a problem using it to switch between lte, wcdma, or gsm on my s4 or this note 3. Weird...
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Im stuck now, already posted another thread about this in the S4 section.
Works on Note 3
inmotion said:
I get a service mode that says rat selection is restricted...
However *#*#4636#*#* will allow you to select whatever band you so choose. Although lte only doesn't allow voice calls
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Thank you inmotion! This code actually worked better for me on my Samsung Galaxy Note 3. I didn't even have to pull out my SIM card or reboot. Just dial in the code, go to Device Info and change the preferred radio network type. It changes the radio on the fly in real time, and can be seen at the top.
Since Android 4.3 and on the option to disable LTE/4G has been removed from all AT&T Android devices.
Solarenemy68 said:
Since Android 4.3 and on the option to disable LTE/4G has been removed from all AT&T Android devices.
Click to expand...
Click to collapse
Actually it was before that. Could not do it on my note 1. Would always get RAT restricted. This was on at&t. Other networks were able to use those codes and make the switch.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
1. Download the free Phone info app from the Google Play Store and install it
2. Choose the Phone Information tab and notice the "Set preferred network type" option at the bottom, marked with an arrow at the right of the drop-down menu
3. Tap on the preferred network listing currently in use, and choose the "CDMA auto (PRL)" option from the drop-down list
4. You should be now maintaining connection to only Verizon's 3G network, and whenever you need to use data, you can switch back to LTE for the duration of it
There are numerous other apps and widgets at the Play Store that claim to do the 2G/3G/4G switch, but many users on Verizon have confirmed the Phone info app to be the only method allowing them to reliably turn off the 4G LTE on their Samsung Galaxy S IIIs.
why would people want to disable LTE? (real question)
pham818 said:
why would people want to disable LTE? (real question)
Click to expand...
Click to collapse
I rather disable 3g so I can stay at lte all the time!
netnerd said:
I rather disable 3g so I can stay at lte all the time!
Click to expand...
Click to collapse
Thats what your phone already does...
pham818 said:
Thats what your phone already does...
Click to expand...
Click to collapse
nope. when 4g lte signal is weak, it drops to "4g".
netnerd said:
nope. when 4g lte signal is weak, it drops to "4g".
Click to expand...
Click to collapse
yeah of course,,,, LTE is not covered in all areas....
Does anyone know how to do a network reset? Because I connect to any Data at all no 4G LTE or 3G none of those. I can't send or receive pictures and go on the internet. I tired taking out Sim card for awhile and still didn't work. Does anyone know what to do? And how to reset network?
Sent from my SAMSUNG-SM-N900A using Tapatalk
Does anyone know how to do a network reset? Because I connect to any Data at all no 4G LTE or 3G none of those. I can't send or receive pictures and go on the internet. I tired taking out Sim card for awhile and still didn't work. Does anyone know what to do? And how to reset network?
Sent from my SAMSUNG-SM-N900A using Tapatalk
shaqqq said:
Does anyone know how to do a network reset? Because I connect to any Data at all no 4G LTE or 3G none of those. I can't send or receive pictures and go on the internet. I tired taking out Sim card for awhile and still didn't work. Does anyone know what to do? And how to reset network?
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
Reset your APN. Make sure it's att phone
Sent from my SM-N900V using xda app-developers app
My provider only uses HSPA +/LTE, the phone always downgrades to hspa (non +) and sometimes 3g which my provider doesn't support so I loose my data connection and it sometimes takes a really long time for it to go back to the proper hspa+ that I need it to use all the time. Anybody knows if I can somehow force the phone to use hspa+ 100% of the time?
Thanks
Sent from my SM-N900 using XDA Premium 4 mobile app
Switch to HSPA+ only mode. Probably wont work with phone calls unless you VOIP.
How??
Sent from my SM-N900 using XDA Premium 4 mobile app
nakedtime said:
Switch to HSPA+ only mode. Probably wont work with phone calls unless you VOIP.
Click to expand...
Click to collapse
You must be mixing up HSPA+ with LTE. I don't think there's a way to choose between HSPA/HSPA+/UMTS, they're all considered 3G or WCDMA (unless you're in Canada.. carriers lie here, those networks shown as 4G are actually 3G)
Sent from my SM-N900W8
Well when my phone shows 3g or hspa I cant get anything to load online, it will stay on this mode for a while sometimes and then as soon as the phone shows hspa+ everything loads perfect. Every othere phone I have bought from Bell mobility in canada show hspa+ all the time.
Sent from my SM-N900 using XDA Premium 4 mobile app
I also had an unlocked Note 2 with exynos processor that did the same thing.
Sent from my SM-N900 using XDA Premium 4 mobile app
Gunner86 said:
Well when my phone shows 3g or hspa I cant get anything to load online, it will stay on this mode for a while sometimes and then as soon as the phone shows hspa+ everything loads perfect. Every othere phone I have bought from Bell mobility in canada show hspa+ all the time.
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I just tried making a call with my Note 3 (S800) and it was able to make a call on HSPA+ on TELUS. I think either your location doesn't have good HSPA+ signal / it's overloaded or there's a problem with the phone, does it support all the 3G frequencies Bell uses?
Sent from my SM-N900W8
yulet said:
You must be mixing up HSPA+ with LTE. I don't think there's a way to choose between HSPA/HSPA+/UMTS, they're all considered 3G or WCDMA (unless you're in Canada.. carriers lie here, those networks shown as 4G are actually 3G)
Sent from my SM-N900W8
Click to expand...
Click to collapse
The N9000 doesnt have any LTE radios.
nakedtime said:
The N9000 doesnt have any LTE radios.
Click to expand...
Click to collapse
I know, you said "switch to HSPA+ only but you may not be able to make calls." You can switch to LTE only and you will not be able to make calls. You can make calls on HSPA+.
Sent from my SM-N900W8
Gunner86 said:
How??
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
call #9090#.
Will bring up configuration menu.
Should be tons of radio mode options. One should be HSPA+ only.
Must be the wrong code, *9090* doesn't do anything and *#9090# brings me to a service menu which has no radio settings
Sent from my SM-N900 using XDA Premium 4 mobile app
Bell mobility uses "UMTS/HSPA compatible on 850 and 1900 MHz bands" which is supported by the note 3, I just dont get why both my unlocked exynos note 2 (got rid of it 1 month after I bought it because of this problem) and also the exynos note 3 have this problem on bell mobility in canada.....
Sent from my SM-N900 using XDA Premium 4 mobile app
Gunner86 said:
Must be the wrong code, *9090* doesn't do anything and *#9090# brings me to a service menu which has no radio settings
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You can always edit data retry to a smaller number in your build.prop.
"ro.telephony.default_network" is the build.prop entry for which default network you're on. You could figure out which one of those corresponds to HSPA+ (probably through trial and error).
**edit
Oh, you may just have to flash a new modem then O.0
My N9005 is missing quite a few radios at the moment as well.
Wish I could do all of that lol
Sent from my SM-N900 using XDA Premium 4 mobile app
Any other idea's?
Sent from my SM-N900 using XDA Premium 4 mobile app
Maybe there is sime kind of problem with your sim and/or phone...
I'm with Virgin (owned by Bell and same network). My device is switching between 3G and HSPA+... And it's working perfectly fine.
Sent from my SM-N900 with Tapatalk
see if this works:
Settings > More Networks (under connections) > Mobile Networks > Network Mode = choose the option which you like and see if it works.
heads up, even with settings forced from here my network sometimes fluctuates.
These issues apply to T-Mobile users installing the current build of 4.4 (and possibly other GSM carriers but I don't have an ATT SIM to test). Motorola is aware of the issue. I read these forums pretty thoroughly and I've been answering these questions all over so I figured I'd just put them all one place. Issues as follows:
- Devices with the LTE radio active cannot send SMS
- Devices with the LTE radio active cannot send MMS (Carrier/Settings dependent)
- Devices with the LTE radio active cannot make phone calls and instantly disconnects on call attempt.
Urban Legends:
- Stock tethering does not work - I have personally tested on TMO and know it does work. Yer doin' it wrong.
Fixes
Easiest fix for now if you're on a device running 4.4 and want to... you know... be able to use your phone... is to use phone information and switch the radio mode over to GSM Only (not the auto one). This fix is a little finicky because if the phone realizes it's not running in the mode selected on your mobile networks screen it will override and turn LTE back on if you haven't selected UMTS only.
Full steps are:
Mobile network settings - Change network mode to LTE/GSM/UMTS
Mobile network settings - Select network UMTS Only
Install app linked below
Open Phone Info and select GSM Only
Phone info apk for sideload - http://www.mediafire.com/download/284l17ry2ok1yuk/Phone_info_1.3.apk
I'll update this thread as I discover more issues or as people post issues that can be replicated below.
Thank you. Finally I got the LTE turn off.
I gotta switch the mobile mode to LTE/UMTS/ gsm and select network as UMTS only. Then use phone info choose gsm only.
Sent from my XT1080 using xda app-developers app
vuphongkkk said:
Thank you. Finally I got the LTE turn off.
I gotta switch the mobile mode to LTE/UMTS/ gsm and select network as UMTS only. Then use phone info choose gsm only.
Sent from my XT1080 using xda app-developers app
Click to expand...
Click to collapse
when I use those settings, I only get Edge. I mean, its better than nothing, but still....
DaemonAshra said:
when I use those settings, I only get Edge. I mean, its better than nothing, but still....
Click to expand...
Click to collapse
Not all areas are refarmed for hspa+
Sent from my XT1080 using Tapatalk
arcanexvi said:
Not all areas are refarmed for hspa+
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
It was selecting GSM Only in Phone Info. Switched it to GSM auto (PRL) and I got HSPA+ back.
but Seriously dude. thanks for this info. I was tired of using my Moto G while my MAXX was just collecting Dust.
Edited the OP for a more clear fix. Thank you to vuphongkkk for pointing out the UMTS only.
I'm on T-Mobile and live in an HSPA+ refarmed area (NYC), but there are places I go on a regular basis that aren't refarmed. I set it on "WCDMA preferred" and voila, I have both 2 & 3G connectivity, with preference given to 3G.
I can't post links, but this XDA thread explains it in more detail I think: ... showthread.php?t=688492
Vodafone confirmed for anyone wondering.
H+ for UMTS only,
Edge for global.
No Sim adjusting at all
Just popped a sim in today. Getting LTE but really hating the call fail bug. Gotta place the call twice repeatedly to get it through
Maxx'd out Kit Kat
Update: Having major glitches when running LTE, pretty deal breaking for a full switch to tmo right now. Eagerly awaiting the new OTA to see if it fixes it. Seems to have major issues on the HSPA/LTE handoff. How did it function prior to 4.4?
Maxx'd out Kit Kat
On 4.2.2 was working fine, the phone just switch from LTE to 3g itself when you need to make phone call. But I had problem on 4.2.2 that if I connect to WiFi then it'll take awhile to get the LTE back. Normally an hour after out of WiFi range
Sent from my XT1080 using xda app-developers app
vuphongkkk said:
On 4.2.2 was working fine, the phone just switch from LTE to 3g itself when you need to make phone call. But I had problem on 4.2.2 that if I connect to WiFi then it'll take awhile to get the LTE back. Normally an hour after out of WiFi range
Sent from my XT1080 using xda app-developers app
Click to expand...
Click to collapse
Maybe thats the problem I was having? I just ended up with a 4.2.2 phone after my 4.4 got destroyed. LTE wouldnt work for me but I was in the house after switching off wifi...hmmm
Arcanexvi what's the best APN to use for 4.2.2? And do I have to have phone info installed or can I uninstall it? Since I changed all the settings to get hspa+ I forgot what the default settings were. =\ whoops and thanks for all your help so far
Sent from my XT1080 using xda app-developers app
vlcano57 said:
Arcanexvi what's the best APN to use for 4.2.2? And do I have to have phone info installed or can I uninstall it? Since I changed all the settings to get hspa+ I forgot what the default settings were. =\ whoops and thanks for all your help so far
Sent from my XT1080 using xda app-developers app
Click to expand...
Click to collapse
APN: fast.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
You can uninstall it if you want. It's extremely small though so no reason to do so unless you just don't want to see the icon. Uninstalling will NOT reset your settings.
Sent from my XT1080 using Tapatalk
Thanks! I messed myself all up though.
In android mobile network settings should I have network mode as global, LTE/CDMA or LTE/gsm/umts?
If its LTE/gsm/umts do I still use gsm only under select network?
And if I leave phone info installed do I have to change anything on there for LTE to work? Phone info seems to change the network selection in the app on its own so I just stopped messing with it. Thanks and sorry to be a pain
Sent from my XT1080 using xda app-developers app
If you on 4.4 you don't have to change anything to have LTE work on your phone. Follow step by step from the beginning of the thread to turn off LTE
Sent from my XT1080 using xda app-developers app
I'm on 4.2.2 and already changed settings. So was curious on what the original settings on 4.2.2 are to get LTE working with APN settings
Sent from my XT1080 using xda app-developers app
4.2.2 rarely get LTE data. Choose network mode as LTE/gsm/UMTS . select network as automatic. Don't use the phone info. If you already use the phone info app in this thread then use it again to switch back to LTE/gsm.. Or the option that has evething.
Remember to add APN fast.t-mobile.com
But as I mentioned, 4.2.2 has some problem with the radio , so it rarely pick up LTE
Sent from my XT1080 using xda app-developers app
Oh well in that case I might as well leave it lol. Thanks for the info
Sent from my XT1080 using xda app-developers app
Just to add another data point, I have a Droid Mini on stock 4.2.2. I'm connecting to t-mobile with the listed apn info, global and auto. I have LTE the vast majority of the time.
Cheers!