Hi i need help with this problem, i have a Motorola Milestone x MB809 and i programing my cellphone and this cellphone in the boot is freeze in the screen only i see a logo, i need help for unfreze and install another stock finware or rom for fixed my cellphone i wait for the best solution thanks...
I know nothing about the milestone X...
But what were you attempting to do when your phone did this?
You're probably going to have to either SBF or do a factory reset from the stock recovery.
I don't know if you have a special SBF file for the milestone X, but I'm sure you can find info via google.
If you want, you can try to pull the battery for a few seconds...
Put it back in...
Hold both the home button + the power button until an android with an exclamation point shows up.
Then press the search button.
Navigate to factory reset.
You'll lose all of your applications and such, but I can't think of a better route for you to try anyway.
If that doesn't work, you'll have to find an applicable SBF.
I have updated my 2.1 to 2.3.4 swift v2 m6 based on cyangenmod 7.1.0 RCO.
Love the ROM
Issues, I paid for the optus unlock code and have to put in 2945#*520# to put in the provided code. The error comes up Connection problem or invalid MMI code.
I have spent a couple of days looking at different forums and solutions, tried extra pauses etc and still the same issues. One suggested going back to original ROM and trying that, however another issue I have is the phone will not boot back into recovery or bootloader, just turn off and stays that way. I have held different buttons as stated in different threads and even hopped on one foot.
I am happy with this ROM just want to get to the unlock menu, any ideas that I might have missed??
Cheers Ernie
Do you have fastboot, the unlock ccode only works on 1.6 official btw
i think it works on 2.1 too as long as the rom has the hidden menu. so best is to try boot into fastboot via power and camera button. (try holding it very hard and long till the black screen appears) and flash any 2.1 rom
No good
Tried the power camera buttons never worked. Is there a fastboot 2.1 file that was like the 2.3 file that you just double clicked on and it installed the new android? So I can just click on the file 2.1 and it will load up?
Ebay? hope not
Or is there another unlocking solution apart from trying to down grade my android, is there a network unlock that can be performed with other software?
Cheers for any help.
I am not really an optus fan and like to use whatever sim I like at the time, I suppose if I can not unlock the carrier it will go to ebay.
When I power off the phone it gives me the option to shut down, recovery etc however if I choose other than to turn it off it will not reboot.
hmmm rambling now
Ernie
Either flash via KDZ method a 2.1 rom.
Or
Find in development threads thers a recovery zip for 2.1.
Sent from my GT540 using xda premium
Warning
Just a warning, if you get one of these phones network locked, unlock it before upgrading the android.
I have spent a week on this trying to downgrade to 2.1 so I can get to the unlock menu.
I have followed directions from many sites and flashed using kdz, have put recovery on using command prompt, use solution to get the phone to show up menus. Where I fall down is I can not get past the selection where the forums tell me to hold power/camera or other buttons and a menu will come up and give options to select install from sdcard. No matter what I do I can not get to that section??
This is really frustrating me, I have tried so many solution.
However, each time I fail and the phone is black, I just load the recovery with kdz and then click on Android234GT540_06-06-11_eng and this last file auto installs 2.3.4, wonderful, so is there a file like this for 2.1?? if so I pretty sure I can then downgrade then get to the unlock menu.
Or is there another network unlock solution.
Please help
Ernie
Solved
You are the man, thank you sooooooo much, two weeks on getting the downgrade working and this works a treat.
After downgrade I was able to get into the unlock menu and was able to enter the unlock code, I am so happy for your post.
Ernie
Dr.Alani said:
It does not cause a problem to downgrade to 2.1 without fastboot, I have done that several times. All you have to focus on is the following:
after doing "fastboot -w" turn the phone off. And DO NOT TURN IT ON AGAIN. Remove the battery, sim and SD. Hold the camera + power and then plug the phone to usb it will run into download mode. Run the KDZ updater with CS Emergency mode and flash whatever 20A rom you can have. Before the update ends, it will reboot and ask you to insert the battery. Do not unplug the phone until the KDZ updater gives you the ======= finished ====== message.
I hope this helps.
Click to expand...
Click to collapse
Tamate said:
I have updated my 2.1 to 2.3.4 swift v2 m6 based on cyangenmod 7.1.0 RCO.
Issues, I paid for the optus unlock code and have to put in 2945#*520# to put in the provided code. The error comes up Connection problem or invalid MMI code.
Cheers Ernie
Click to expand...
Click to collapse
If your phone has model# 540 then you should dial 2945#*540# not 2945#*520#, i.e. the final three digits should be the model number. Otherwise you will get the error you mentioned.
Hello
After I upgraded my second milestone for the official 2.3.6 rom the wi-fi is only rebooting every 10 minutes and this is more disturbing ...
Does anyone know how to solve this?
There is already some form of return to the factory rom (Froyo 2.2)?
Note: My second milestone is rooteado!
thank you!
Seems to be some kind of sleep-time of wi-fi, i got the same problem, but only when i don't use the phone for like 5m, and when i see the wi-fi is disconected but automaticly connect when i start using the phone.
try to go to the wifi settings and press the menu key. a context menu should pop up.
click on advanced and set the wlan-standby-policy to always.
if the problem is still present, try to reflash the gb-image via rsd-lite
so here's what was going on:
t-mobile mb525
had stock eclair rom working fine
updated to froyo through tmobile
installed bootmenu and cyanogenmod stable which worked fine
tried to soft unlock after which cyanogenmod wouldn't go to the main screen
uninstalled bootmenu through its menu which didn't help
used rsd lite to flash the stock sbf but it loops rebooting itself, never goes to the main screen
trying to use the stock recovery to erase data and cache: the triangle and exclamation point display, but menus don't appear
any help is appreciated
add: it appears here's the same problem: http://forum.xda-developers.com/showthread.php?t=1703843
is there no hope at all?
ok so basically menu appears when you tap the area just above the find button (the very right one)
hi
i tried to install stable 7.2 on my defy+...and my device startrd acting strange.
after the red m logo it went straight to "bootloader 9.10 usb ok transfer..." screen. without pressing any buttons.
so i had to flash the rooted stock 2.3.6 "firmware.sbf" agiain.
please tell me what i missed during this whole process?
Go to https://github.com/maniac103/android_device_motorola_jordan-common/downloads and choose this file "cm-7-20121018-UNOFFICIAL-jordan_plus-signed.zip" and look at that http://newtechworld.net/how-to-install-cyanogenmod-7-on-motorola-defy/