Related
Well i see this has not been posted here before... so, the best (so far) Eclair rom for Liquid
By malez, piter1225, behnaam, maxisma and vache
Wiki Page:
http://code.google.com/p/acer-liqui...cker/wiki/HowToRootAndFlashLiquidCommunityROM
Bugtracker page on Google Code
http://code.google.com/p/acer-liquid-community-rom-bugtracker/
Changelog:
To upgrade from 1.X to 1.7, you need to install the latest official Acer_LiquidE_1.100.39_EMEA_GEN1 update file first (1.100.05 bin file will work too)¶
bin file and howto are here http://code.google.com/p/acer-liqui...cker/wiki/HowToRootAndFlashLiquidCommunityROM
Future¶
Themes pack
Current¶
Always reboot at least once after installing and configuring a new rom or patch¶
If you have used apps2sd, always do a WIPE SD in sdcard menu within the recovery before installing LCR¶
Please use bug tracker to indicate closed bugs, append to existing ones or open new issues. Thank you all
From 1.7.2 to 1.7.3 (this version is a patch, no data loss EXCEPT your launchers configuration (can be easily backed up) and updated apps)
Added Froyo Gallery3D (for real
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
)
fixed SD card issue
fixed dxdrm logging
modified setUIval.sh / getUIval.sh to be able to choose the requested setting table OK
ramzswap enabled
fixed filterAds.sh
modified audiocall.sh to add another audio filter (quiet to loud) OK
added a gscript to clean logs (logs are stored in /cache use about 100k/each boot) OK
updated apps
wake on camera (Credits to xaueious)
modified cleanRom : 30sec timer to let user poweroff the phone in case a wrong run + removed VoiceSearch? + sendlog
addded sms.sh to backup/restore sms /system/sbin/sms.sh gscript OK
update uiconf tool with screenshots
no more freq limit
Google Maps moved to /data/app
Speed Up Android 2.1 Browser, Default javascript engine in Froyo. Enabled
animated GIF support (Credits to Auxx / g4rb4g3 / xaueious )
From 1.7.1 to 1.7.2 (this version is a full version). We advice you to install latest Acer Update to eclair first.
Fixed sound on call
New application to configure UI (developped by reppad [email protected])
Additionnal fonts were removed, so asian languages are back
Gallery app from froyo
Purge DxDrm logs on reboot
Purge aPanic on reboot
Wifi tethering (many thanks to gengaro86)
Fixed some UI issues
All apn were updated
Bluetouth file transfer
Added cleanROM.sh in gscript : will remove all 3rd apps included in the rom
Added filterAds.sh/unfilterAds.sh in gscript to remove adds
Added audiocallLoud.sh / audiocallStandard.sh / audiocallQuietToLoud.sh to change audiocall sound
Other fixes
From 1.7 to 1.7.1 (for the moment only a patch is provided, not a full rom, so install it on trop of the 1.7. You won't lose any application or data.
Fixed battery usage (use full android UI, stream UI uses a lot a battery)
Audio hack for in call sound (a bit louder)
Fix sound reverb on app like Sipdroid
Fix slow gallery
Fix camera (note that zoom in camera is available when taking picture under 2M resolution)
Ability to use standard eclair AOSP dialer in LCR_UI.txt
will remove Notes application (Titanium backup it before applying if you want to keep it)
Updated Google Maps 4.3
Updated sendlog
Updated Launcher Pro 0.6.3
Updated ADW 0.8.9 => If you slide up, status bar will hide/show. If you slide down, notification bar will display
Updated Titanium Backup 3.2.7
Updated android term
To gain in space usage, it is recommanded you uninstall all updates for these application before applying (they can be removed after but you won't have the preconf for launchers in this case).
ALWAYS DO A NANDROID BACKUP FIRST
Always reboot at leat once after first boot to be sure everything is well applied.
From 1.6 to 1.7
based on Acer_LiquidE_1.100.05_EMEA bin file. Flash THIS bin file before installing Update recovery to at least 0.5.3 too
Based on stream dump
New fully cusomizable User Interface : Notification type, notification position, dialer, lock screen (See the file LCR_UI.txt on sdcard for more infos. To apply changes, just reboot. You will need to remove/re-add widgets after applying a change. Use Stream lock stream will break widget refresh on reboot))
really faster than original bin and than 1.6
Incredible sound with Dolby Mobile
Read Divx / Xvid
New Camera app with a lot of settings
Voice Recognition
sensivity patch included but not applied (use gscript to load increaseSensitivity.sh and it will be applied permanently / to remove run restoreSensitivity.sh)
better open GL
black themed
optimized network for better performances (can be disabled)
fixed Bouygues Telecom MMS issues (issue 78) no more need to use Hancent to send mms.
fixed Add APN to list (issue 96)
fixed custom ring-tones for contacts are not working (issue 99)
fixed Sms notification sender is wrong (issue 100)
fixed Wifi doesn't work after wake up (issue 101)
fixed issue Phone stay in standby if switching from 3g to 2g (issue 102)
Launcher choice at startup (to unselect default one : Settings / Application / Filter ALL / Select defaut launcher and choose 'remove default action' )
fixed Widget load on reboot
many optimizations (Framework, Contacts, Live wallpapers, Mms)
New bootsplash / bootanimation (thanks to paulf66)
New supported fonts : Greek, Cyrillic, Georgian, Armenian, Hebrew, N'ko, Tifinagh, Lao, Canadian Aboriginal Syllabics, Ogham, Arabic
updated HTC keyboard
update Launcher Pro and AWT Launcheradb shell
updated Maps 4.2
updated Barcode scanner
updated titanium backup 3.2.4
updated Deskclock Launcher
updated ES File explorer
updated ES Task manager
Updated quickboot
and more....
of course apps2sd is still here
know bug: if you use acer stream lock screen, your widgets won't refresh well. You will have to remove and re-add them after reboot.
know bug: battery indicator will always indicate a little less battery than you really have. Use battery time lite widget for exemple to know the exact amount of battery available.
system will automatically reboot after first boot ( about 30s after sim panel ) : this is normal
From 1.5 to 1.6
* based on Acer_LiquidE_1.100.05_EMEA bin file. Flash THIS bin file before installing is recommanded but you can also flash the rom on top of 0.14 or 0.16 bin. Update recovery to at least 0.5.3 too
* really faster than original bin
* some battery optimizations
* black themed (white theme patch will be provided)
* optimized network for better performances (can be disabled)
* fixed Bouygues Telecom MMS issues (issue 78) use Hancent to send mms.
* Launcher choice at startup (to unselect default one : Settings / Application / Filter ALL / Select defaut launcher and choose 'remove default action' )
* many optimizations (Framework, Contacts, Live wallpapers, Mms)
* added a Notes app
* removed xt9
* removed Voice search and accessibility tools
* updated Maps
* updated Barcode scanner
* updated titanium backup
* updated Deskclock Launcher
* and more....
Many thanks to Piter who has joint LCR and made a really good job on this rom. If you want better battery performance, disable haptic feedback (use spare part) and vibration in HTC mod keyboard (keyboard settings / Text input / Vibrate on input)
From 1.4.1 to 1.5
* based on Acer_LiquidE_0.014f.01_EMEA_GEN1 bin file. Flash THIS bin file before installing or you will have no network and no adb access. Update recovery to at least 0.5.3 too
* really faster than original bin
* AppsOrganizer, Cardock, Carmode, Tetherbot removed. Will be provided as addon pack
* Themes will be provided as patch too
* Acer apps removed
* DeskClock Launcher (big thanks to Cedric Gatay)
* Maps 4.1.1
* Titanium backup 3.0.16
* es File explorer 1.3.12
* es Task manager 1.0.8.0
* barcode scanner 3.22
* Meridian player pioneer 0.16.0
* fixed 3D games are slow or not working at all on 1.3. ( issue 66 )
* fixed Compass doesn't work probably causing backwards navigation in all navigation programs ( issue 68 )
* fixed Compass doesn't work probably causing backwards navigation in all navigation programs ( issue 73 )
* fixed Keybord vibration not workingHTC_IME ( issue 75 )
* fixed Contacts pictures ( issue 77 )
* partially fixed Bouygues Telecom MMS issues (issue 78) change default,mms to wap in settings to fix
* fixed Message led is on if a notification icon in a taskbar ( issue 79 )
* even better sound
From 1.4.1 to 1.4
To upgrade from LCR 1.4, just flash the zip file. If you have not LCR 1.4 installed do a FACTORY RESET before flashing
* fixed vodafone it apn ( issue 73 )
* fixed Sometimes connection don't work after disabling/enabling data connection (issue 83)
* fixed Clock alarm bug with daily alarm when it was first reapeted ( issue 85 )
From 1.3 to 1.4
Video : http://www.youtube.com/watch?v=RHuL8-159q8 (thanks to fastreward)
* Fully rebased on new bin (Acer_LiquidE_0.010.00_EMEA_GEN1)
* BusyBox v1.16.0
* Superuser 2.0.1 (Chain DD)
* HTC IME with voice and mods (Jonasl)
* New black theme (AdamZ - Baisangour)
* New boot and wallpaper (Paul 66)
* New boot animation (liquid_it)
* Helix 2 Launcher
* Nemo player
* Flac player
* New calculator
* NavLauncher => 2.2.4
* Titanium backup => 3.0.4
* MoreLocale => 2.2.0
* AppsOrganizer => 1.4.10
* Barcode Scanner => 3.22
* GoogleMaps => 4.1.1
* Removed facebook
* Removed battery graph (addon)
* Removed AutoKiller
* Fixed Nexus Live wallpaper (bais)
* Better Audio No distorsion at all (Metlus)
* Added Flac support (AndLess)
* Added Meridian Player Pioneer 0.15.3
* Added Gscript lite : (change defaut launcher)
Big Big thanks to Paul66, Fastreward, Neo, Natsumi, Liquid_it and all members that have supported this version. Thank you all. It's for you. Malez
1.3 addon pack (LCR 1.3 required) = Addon pack v3 fixed
* script to fix su request issues
* clock weather widget (HTC style)
* animated wallpaper (Earth / HTC Sense)
* online wallpaper app
* Original laucher with app/photo widgets from acer (use adb shell launcher stock/helixir/status to switch)
* NemoPlayer
See wiki page for pictures and documentation
From 1.2.4 to 1.3 wipe made on install
* Rebuilt on new liquid Acer_LiquidE_0.008.06_EMEA_GEN1 bin (compatible with baseband A1-03.10.03 only)
* Multitouch
* Added more locale 2 for internationalization (settings in app list)
* Added international keybord
* Added titanium backup 2.9.7.4
* Added tetherbot
* Added navlaucher
* Added more ringtones
* Added sqlite
* Bootsplash graphics by Cyril Bardelang
* Of course fully working apps2sd
From 1.2.3 to 1.2.4 factory reset recommended
* compatible with ACER_LiquidE_0.004.01_EMEA_GEN1 bin only (baseband A1-03.05.02)
* Do a factory reset to be sure to benefit of all fixes in this version
* auto fix boot if data/dalvik are symlink and no sd card
* fixed MMS send
* fixed memPrint
* added cardock + carmode
* added file explorer + task manager
* added sendLog
* added tetherbot.apk
* added AppsOrganizer_1.4.8.apk
* added barecodeScanner.apk
* added battery graph
* removed auto flash malez recovery
* added wysie contact
* fixed sipdroid (if not uninstall/resinstall sipdroid)
From 1.2.2 to 1.2.3
BIG THANKS TO MALEZ FOR HIS HUGE CONTRIBUTIONS!
* Voice Search is fixed!
* Apps2SD will now check if there's enough space free on your SD
* Apps2SD won't break if you don't have an app installed anymore
* Apps2SD now can move dalvik-cache and data (data not recommended!) also (See Wiki for instructions)
* ROM keeps the autostart log now
* Added logboot to display all autostart logs
* Added logbootclear to erase all autostart logs
* Added memPrint command to display memory usage and settings
* Fixed ins_run and ins_runOnce for args
* Changed oom settings for less cpu and battery
* Corrected log-debug for better structure of logs
* No more need to reinstall update.zip after factory reset/data wipe
* Automatic memory settings adjusted
* Autokiller updated to 2.2 (personnal preset)
* MapView fix which affected for example Places Directory (credit to shafty)
From 1.2.1.1 to 1.2.2
* Fixed rights on autorun scripts
* All apks are zipaligned on boot for even better performance
From 1.2.1 to 1.2.1.1
* Boot logs are now stored in /data/logs/
* Little boot speed up
From 1.2 to 1.2.1
* Fixed terminal emulator FC
* Added Quickboot
From 1.1.1 to 1.2
BIG CHANGES! Apps2SD wiki will be updated tomorrow by Malez on how-to switch apps2sd on
* A lot of speed improvements
* HelixLauncher with modifications! Thanks to Faruq!
* Some apps moved to /data partition for easly uninstallation
o SpareParts
o AutoKiller - By ratson at htcpedia, thanks!
o Maps Brut.ALL's hacked maps for Non-us navigation, thanks!
o SetCPU
* Apps2SD fully working with ON/OF/STATUS feature and auto fix (if sd fails on boot). - Big thanks to Malez for his work on this!
* Terminal Emulator added for doing commands when you dont have access to a computer
* Recovery flashed on first boot - Malez Recovery 0.2.1!
* Zipalign of data on boot, lowers apps footprint which gives faster loading of them!
* Some other things missed out!
From 1.1 to 1.1.1
Only slight changes..
- Exchange Calendar Sync
- Added Talkback, Kickback and Soundback
- Fixed T-Mobile US APN (Thanks to eVil)
- Fixed build number
- Nexus themed Launcher.apk
From 1.0 to 1.1
- Zipalign on-install, Thanks to Wes Gerner for that script
- SpareParts (added)
- Launcher2 replaced with Standard Android Launcher for more speed (Live Wallpapers are still working !!), update.zip provided for those who want it back look in downloads section - Thanks to [email protected] for launcher
- Apps2SD with on/off feature (disabled by default) (You need an ext2 partition of course), read Wiki for guide howto activate - Thanks to LoxdevK, Cyanogen and more for that script
From ACR to 1.0
-Kept Acer's Contacts.apk as it provides an HTC like speed dialer and some other functions
-Nexus One bootlogo (Thanks to g4rb4g3) & bootanimation
-Removed the automatic wipe, if you have problems, please wipe first and retry!
-Zipalign on boot
-Increased VM Heapsize for speed
-Zipaligned and Optipng'ed all the apk's aka optimized them for speed
Hi ! Thank you for this share but :
- Do you have screenshots for this ROM ?
- The bugtracker page doesn't work...
Thanks
anghell3122 said:
- The bugtracker page doesn't work...
Click to expand...
Click to collapse
http://code.google.com/p/acer-liquid-community-rom-bugtracker/
thanks, just updated the link
sure screenshots:
someone have tried this one? work fine?
been using it for a couple weeks... its nowhere near as fast as donut... but hey, its a first approach to eclair on the liquid... i use it just for fun, my work phone is a nokia e72... so i can play with this
upgraded
well, just updated from acr 1.8 which became sluggish...
I was prepared to reinstall all my apps and was a beautyful surprise finding everithing back in place I just put the zip in sd, booted into recovery and "apply any zip from sd card". fast and efficient! I have just 2 annoiances:
1- I'd like to put the phone on vibrate in the lockscreen, not only mute (but I think is a problem of the system, not of the rom itself
2-when I open a contact I see on the right side either the phone number to call and the possibility to send a msg; but no matter what I choose only the phone call starts. Is this a rom bug (also on acr 1,8) or part of the original system?
Rest seems very good, fast and efficient
1.2.2 version is out and is quite a good ROM. All apps are running much faster.
http://code.google.com/p/acer-liquid-community-rom-bugtracker/
just updated the info!!
quoting malez...
LCR 1.5 available
From 1.4.1 to 1.5
- based on Acer_LiquidE_0.014f.01_EMEA_GEN1 bin file. Flash THIS bin file before installing or you will have no network and no adb access
- really faster than original bin
- AppsOrganizer?, Cardock, Carmode, Tetherbot removed. Will be provided as addon pack
- Themes will be provided as patch too
- Acer apps removed
- Maps 4.1.1
- Titanium backup 3.0.16
- es File explorer 1.3.12
- es Task manager 1.0.8.0
- barcode scanner 3.22
- Meridian player pioneer 0.16.0
- fixed 3D games are slow or not working at all on 1.3. (issue 66)
- fixed Compass doesn't work probably causing backwards navigation in all navigation programs (issue 68)
- fixed Compass doesn't work probably causing backwards navigation in all navigation programs (issue 73)
- fixed Keybord vibration not workingHTC_IME (issue 75)
- fixed Contacts pictures (issue 77)
- partially fixed Bouygues Telecom MMS issues (issue 78) change default,mms to wap in settings to fix
- fixed Message led is on if a notification icon in a taskbar (issue 79)
WARNING :
- install malez recovery >= 0.5.3 first
- If you have used apps2sd, WIPE SD (in wipe the recovery wipe menu) before flashing or you will have problems
updated to 1.6!
help with pinch to zoom
thank to all commuinty for this wondergul rom
I installed it succesully but while I have pinch to zoom in google maps don't have it in chrome
how to enable pinch to zoom in chrome?
teux said:
thank to all commuinty for this wondergul rom
I installed it succesully but while I have pinch to zoom in google maps don't have it in chrome
how to enable pinch to zoom in chrome?
Click to expand...
Click to collapse
you just get dolphin browser HD
Multitouch should work in stock browser on this bin. It does for me.
Thanks to all, I am using this ROM now, the best ROM I tried, but I got the problem with Contacts;
- there is no Contact Phone, only Google and SIM Contacts available to add..
- I have a lot of contacts in my SIM, but when I want to import SIM Contacts, it reported that no contacts in my SIM..
Pls help, thank you..
thuwailib said:
Thanks to all, I am using this ROM now, the best ROM I tried, but I got the problem with Contacts;
- there is no Contact Phone, only Google and SIM Contacts available to add..
- I have a lot of contacts in my SIM, but when I want to import SIM Contacts, it reported that no contacts in my SIM..
Pls help, thank you..
Click to expand...
Click to collapse
just updated thread to 1.7 ... try that one first
this rom is very fast and stable.you've got a lot of options inside.it is faster than the lcr 1.6.now you can find dolby sound in it.,this is incredible. thank you very much.
jpmve said:
this rom is very fast and stable.you've got a lot of options inside.it is faster than the lcr 1.6.now you can find dolby sound in it.,this is incredible. thank you very much.
Click to expand...
Click to collapse
also, there's divx support!
[[ Cold ]] said:
just updated thread to 1.7 ... try that one first
Click to expand...
Click to collapse
Thanks Cold, I've just updated to 1.7, it's load SIM Contacts on first reboot, but didn't load again on second and next reboot..
Also, I couldn't import SIM Contacts from Contacts application.. and the Phone Contacts (I mean phone memory contacts) still not found..
I like this ROM, except this problem..
Thanks all developers for this wonderful ROM..
Installed LCR1.7 and I wouldn't say it's stable.
Lot of applications are crashing...
Will go back to 1.6 and wait for updates of 1.7 to come.
枫影2.3.4ROM Made in China I have already Translated into English！！welcome everyone
Adaptation of models for the MOTO ATRIX all versions, such as the following:
ATT
China (including Hongkong, Taiwan)
The Republic of Korea
Canada
Australia
France
Britain
Italy
Singapore
Distinguish between simple version - the MOTO ATRIX series of only two version - International Version and the version of ATT, the list above, ATT is the ATT version, other all belong to the international edition.
Ha ha ~ ~ ~ ~ you are not wrong, is all versions, have been more tests, through the brush is so simple ~ ~ ~
But there are a few points I want the next state:
In 1, the version of MOTO official BELL version of 2.3.4 system, the latest version of the official.
In 2, I'm really sorry you, waiting for such a long period of time, my personal life is very busy with work, busy busy building completed, feelings, really busy, I'm sorry......
3, the use of the system need machine BL unlock, unlock the following information:
( 1) the International Edition ( most ): http: / / bbs.gfan.com / android-2002585 - 32771; ] ...
( 2) named Hong Kong Version ( the presence of a hard tile probability, so listed separately ): http: / / bbs.gfan.com / viewthread.php? T... 20284 ];
( 3) named Singapore Edition ( the presence of a hard tile probability, so listed separately ): http: / / bbs.gfan.com / viewthread.php? From = favorites t...
In addition, after my system in external a batch to install the recommended software and AD advertisement software projects, I hope everyone on my work can support, thank you!
PS: advertising software can be removed, the specific use of built-in RE manager, enter the / system / APP /, find all com. APK at the beginning of program, deleted, restart the machine, is so simple, if you are not willing to do, that also is not brush.....
My note:
I love to toss, especially in Android mobile phone, no matter what his models, as long as I like, I can put him in a good
System description:
[ ] take reading system
Version number: Maple Shade v3.4.4
System improvement:
1, No. 100 baseband, relatively the baseband signal and fever are quite considerable. ( due to the discovery of before China baseband and 2.3.4 system in compatibility problems, so this version to give up in the country such as baseband baseband, line officially launched the 2.3.4 to update the version is. PS : Celestial does not update.. ).
2, support for H +, you read that right, is the real H +, don't argue with me, have more tests to download faster than 6XX KB / S, not KBPS, this I know!
( H + distinction, due to geographical questions, UniCom of different regions to H + at different rates, for example, Changsha here, if you are old 186 card, the speed will be locked in the 3XX KB / S, if it is in Zhengzhou, faster than 620KB / S, if it is in Shanghai, faster than the 680KB / S, if Kunming, faster than the 1MB / S )
3, support operator custom [ default Chinese operators, if necessary, can go to / system / etc / spn-conf.xml automatically controlled to modify, and do not want to show, name blank can be ] ( last edition 3.4 I forget to maple shade modified reduction, this version fixes, you can freely modify )
4, support all Google official upgrade ( I was not in favor of ROM direct update Google applications, because it will lead to a new version will not be able to update! So please update the best, direct electron market update )
5, system settings - Voice: can be manually opened, closed, four big Jin'gang vibration; open, closed, SD card sound load; open, close button sound;
6, the system has Deodexed, and through the official GOOGLE SDK zipalign acceleration
In 7, ROOT perfect
In 8, the perfect Chinese SMS, MMS CDMA mutual
In 9, the operator APN information automatic setting
In 10, AGPS by default, give you the most awesome GPS positioning!!! Default 10 seconds [ ] preliminary positioning
In 11, China Unicom, China Mobile 's revised Chinese status bar logo
In 12, the default MOTO BLUR official regional [ if you cannot login account, please register again ]
13, remove the system comes with official procedures, some built-in celestial cannot use function, parts can be replaced with the official program application removal system cache, cleaning
14, continue to optimize the streamlined, kill the voice commands ( to use GOOGLE voice command instead), kill the input method, system flow.
15, authentic Chinese (Simplified Chinese, traditional Chinese, English special join ) the system more smoothly
16, to support the 3G / 2G network switching
17, to join the system browser can shield the spam address function
In 18, WEBTOP distortion correction, and support for WEBTOP, break out.
19, increase of HDMI function, break out.
20, change the HDMI output of 16 : 9 mode
21, speed up external SD card read and write speed, especially for high-speed SD card is very obvious! ( please use the SDTOOL tool to contrast after the upgrade and upgrade the former change! )
In 22, the built-in battery taskbar display accurate to 1%, program control, Chinese, can be set, this thing is very strong
23, adjust the base configuration, enhanced 3G signal receiving capability and network transmission rate
24, open set is installed inside the unknown source APK function, for the user to select mode ( simply can install the pirate )
25, cancel the network operator display hidden
26, support the follow-up version upgrade
Special update:
1 additional systems, automatic memory consolidation, is an excellent system for their own mode of management, not an additional third party software.
2, adjust the JAVA virtual engine for 64M mode, instead of the official 32M mode, more quickly.
3, support time localization, the default for the Beijing + 8.
In 4, the battery 1%
In 5, GTALK video chat support 3G, 2.5G, WIFI
6, optimizing kernel, run 3500 + ( OC kernel, please brush into the official kernel, default )
7, delete from official duty software, YouTube and some useful official software
8, repair lock screen (actually a software: phonesleep, this version 2.3 or later seemingly does not support 2.2 dedicated the lock screen. )
In 9, WEBTOP is the official version ( XDA MOD V2 version of the current brush is a bit of a problem )
10, optimize, accelerate fan speed and system effects switching speed, so that the smooth without delay
11, multi-touch default 4 ( thanks to michael0619 Research ) ( I found more than 5 points sometimes is not very stable, so to stable 4 touch )
12, brush machine fool simplification, automatic restoration of the international version of RAM loss problem
13, open the HDMI settings, open DESK settings, open the APN editor
14, open 32 color dynamic wallpaper support
15, support the volume keys to awaken
16, system support the hard solution MKV 1080P!!! ( if you do not believe, do try)
[ ] to measure
1, download the zip, unzip to C: \
In 2, when I provide drive, of course you drive too would not be
3, the system unlock BL ( above the unlock field notes and links)
In 4, the original system data backup, and to ensure that your built-in SD card available space at least 3G.
In 6, the compression package [ FengYingV3.4.4-AtrixMB860.zip ] files are copied to the built-in SD card under the root directory, please note, is built in the SD card!!!
7, turn off your mobile phone, press the volume down + power key = boot, until the display FastBoot, release the button, press the volume!
( if you have brushed my master R recovery system, please ignore this step )
( if you brush the custom RECOVERY system is not R master version, please replace the master version of R, because CWM 4.0.1 5 does not support the built-in version of the SD card brushing machine!!! Many brush machine success ERROR 7 this error is the problem!!! )
[ here is the master R version RECOVERY Download ] http: / / u.115.com / file / aqkfs7ed
Brush RECOVERY method, please refer to [ 1-3 ] brush machine step
8, plug the USB data line.
OK, is ready to finish.
[ Methods ] upgrade
( if you have brushed my custom recovery recovery system, please continue to ignore the step 1-3 )
( if you are a ATT version, the upgrade method is similar, but the file name is not the same, remember to separate )
1, enter C: \ moto-fastboot-win32 folder, double-click the [ Command Prompt ]
2, see the CMD page, enter the following command to brush into the recovery custom recovery system (note, if you unzip the file is not in the C: \, the command also need corresponding change; does not support Chinese )
Input:
Moto-fastboot flash recovery C: \ moto-fastboot-win32 \ recovery-en-0630-1029.img
RECOVERY recovery system into the brush finish; ( when you see the computer screen display similar XXX / s this information is said to have a good brush )
In 3, then the input moto-fastboot reboot, such as mobile phone automatic restart after entering a system, shutdown.
4, enter recovery mode ( press the volume down + power button to see the FastBoot, press the volume down, switch to an droid recovery, press the volume selection into )
( volume the next choice, the power button to determine )
5, into the recovery model, the corresponding selection:
( 1 ) the first choice of wipe data / factory reset, to empty the historical data (warning: if your recovery CWM-based version, empty when it will prompt you whether or not to empty the sd-ext data, choose! Otherwise your external data of the SD card will disappear! )
Upon completion, will automatically return to the home page
( 2 ) install zip from sdcard
( 3 ) choose zip from sdcard
Select internal SD card ( 4)
( in the external SD card, select external SD card, the useless)
( 5) choose the FengYingV3.4.4-AtrixMB860.zip package, determine, start brushing machine.
Wait patiently for the brush machine to complete, and then select go back has been rolled back to programs
Select the reboot system ( 6 )
6, clean system completed.
System version - FengYing-v3.4.4
Prompt.
In 1, GPS by default, please manually shut down can save electricity
2, if you don't like with advertising, please use the RE manager, enter the / system / APP /, all com. Love can be deleted.
( thank you for your support of my work, please delete before activation; personal recommendations deleted)
Special on how to save:
1, if you are not a developer, please shut down USB debug mode.
2, ibid, using the Android assistant, usually during shut down unnecessary background resident services.
3, setting - > battery management - > Settings: the most power ( when playing the game can be set to a general )
4, usually GPS goes situation, please remember to close the AGPS.
[ I found the differences, some friends, some friends said that energy saving electricity; but I think that if more than my instructions well, basically should be - power ]
Download address
MOTO ATRIX series of the latest drivers, all users please update ( currently in June 6th before the latest )
Http: / / u.115.com / file / bhaxhed8
-- -- -- --
The official U4_2.1.1 SBF bottom bag, please GOOGLE brush machine method, a lot of [ ] for people to spare
Http: / / u.115.com / file / aqpxa6uz
-- -- -- --
Moto-atrix-mb860-2.3.4 - v3.4.4 - Maple Shade released - brush pack!
Http: / / u.115.com / file / e65lnr5r
-- -- -- --
Moto-atrix-mb860-2.3.4 - v3.4.4 - ATT version of Maple Shade - released - brush pack!
Http: / / u.115.com / file / bhish38w
This ROM is made in China also it Built in English
please read it carefully,this ROM in china is very popular！
Has anyone gave this a try?
Sent from my MB860 using XDA Premium App
Screenshots?
I would be very careful when flashing this.
The reason being is that the author of this project has annouced a pull back of this version due to major bugs.
This will be updated soon and that will be the one I would flash, personally.
i wouldn't flash it because it's in the wrong damn forum =p
somethings fisheh
Sorry, but does that say there is mirroring in landscape mode through HDMI?
i cant make sense of most of it..... id like to see some screenshots! most likely wont flash though
Just googled his version number
I am interested in his HDMI 16:9 comment... did he get HDMI Mirror in Landscape?? IF so we need to find out how!!
Found some screens of this guys ROM...
Also a little more information that he did not post i the OP:
About OC core (OC kernel version update is expected on the 25th release):
The system comes with 2 cores and 2 OC native official kernel (thanks to XDA faux123 provided), are:
INTL-MBR-1100-GB-Kernel-0.1.2-ext4-sv.zip (RAM-1100 to adapt the sequence: a variety of optimization OC 1.1G kernel, CWM brush into the can)
INTL-MBR-d00-GB-Kernel-0.1.2-ext4-sv.zip (d00 of RAM to adapt the sequence: a variety of optimization OC 1.1G kernel, CWM brush into the can)
INTL-MBR-1100-original-kernel.zip (adapted for the 1100 series RAM: official native kernel)
INTL-MBR-d00-original-kernel.zip (d00 of RAM to adapt the sequence: the official native kernel)
Most people say why some ROM to run sub-3500 +, in fact, the role of these cores, but the negative effect is that power consumption increases, in fact, in addition to running at the different system fluency, I did not feel much different.
Therefore, the default is system's native kernel.
How to distinguish your phone is 1100 series or d00 series?See above Brush tutorial RAM hour repair parts, similar
On the lock screen, bright screen response speed adjustment instructions:
1, the default lock-screen, once again light up the screen time is about 250 milliseconds.
2, If you think this is slow, need be
3, using the [manager] RE modify / system / build.prop file, find: mot.proximity.delay = 250, modified = 100 to save, you can restart.
Brush on some friends unsuccessful Description:
1, check whether your RECOVERY R master version, and is 6-30 in English that day!
2, check the available capacity of your SD card if there is more than 3G?
3, check whether the copy to Brush package is built-in SD card?
4 Note: The system will automatically restore the machine RECOVERY master version of R, if you are CWM version, when you want to change the system, replace your own version of RECOVERY for the CWM.
Any brave souls willing to flash this and check for HDMI mirroring?
If it's there, maybe someone could pass it along to agrabren. He's got HDMwin working pretty stellar on the EVO 4G so this might be the big push we need to get it on the Atrix.
I'll give a shot,i just need to get this right. download the file with 3.4.4 version and flash it on recovery or install with rds or fastboot?
Sent from my MB860 using XDA App
aaron.a said:
i wouldn't flash it because it's in the wrong damn forum =p
somethings fisheh
Click to expand...
Click to collapse
cm7 its on general and a lot of people are using, give this ROM a shot too.
Sent from my MB860 using XDA App
Downloading from Chinese servers is slow.
slow? i get 8kbps, its more than slow! lol
Sent from my MB860 using XDA App
Actually getting around 80KB/s at points, might have this ROM by the end of next June
I have the file at home, got it last night took an hour to download ill upload it if you want me to tomorrow
Sent from my MB860 using xda premium
JaronBang said:
I have the file at home, got it last night took an hour to download ill upload it if you want me to tomorrow
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
we would appreciate if you did it
Sent from my MB860 using XDA App
Yeah ill do that, just hang tight ill have it up tomorrow.
Sent from my MB860 using xda premium
So I downloaded it. And I tried to flash it. And it aborted
Almost tried it but read that the link was pulled due to bugs. THanks for trying and posting though.
This is the latest Hay ROM
Update
* FPS unlock -55
* optimize script
* kernel geno perfect not broken sound
* streamline retained Google services
* built-in screenshot function normal ( to save the image directory to the / sdcard / MIUI / screen_cap directory)
* optimize script on WIFI range, power adjustment
* optimization scripts on GPS regulation
* optimize script on optimal energy slightly to save electricity
* optimize script to improve operation speed
* optimization scripts on 3D processing run808
* RE Update Manager ( white, enable compatibility after normal )
* updated with theme
* built-in security intelligence ( ROM statistical software market competition, run time, official statistics! )
* UC browser ( ROM competition partners )
Install ROM:
1 will be downloaded from the zip package do not extract, directly into SDcard
2 has been holding down the volume up + power power button, do not loosen, until entering the recovery modeIn
3 recovery, the volume down key / menu, the home key to move up and down, power key / search keys for the confirmation, the return key to return to the previous menu.
4 select" clear all data" to recover the factory
5 select" option package from the SD card"
6 from the SD card can choose a ZIP file"
7 to find just download the zip package confirmation
8 after the confirmation, brush machine, wait 1minutes, complete.
9 after brushing, returns the first menu, select " to immediately restart restart mobile phone system."
10 and then wait for a while, first boot will be slower.
Brush the ROM package use geno's Chinese recovery
Address
115.com/file/dpq975v4#
anzhi-2012-04-042.zip
With the ROM Sakura
MIUI.us Fro U8800pro, not streamlined official any software program, complete the stable version, this is you need the millet system!MIUI system is MIUI, I don't think superfluous, want to touch, everybody knows, the original MIUI more stable, more energy saving optimization.This version ( measured by group of about 60 people ) test, no FC, than the previous MIUI saving some, please support me, thank you!
[ ROM ] the content introduction
* Root MIUI permissions - Original
* FPS unlock -55
* Zipalign optimize script
* kernel - G - perfect not broken sound
* keep all official software, including the latest Google services
115.com/file/e7qrlssk
Hi all
I would like to share my 2nd public sammy kernel+rom, yTab, to you guys. Hope you will like it. Enjoy!
click here for the Android 5.1.1 port (last updated 6/5)
for info about yTab 1.x please goto post #2 here
NOTE:
for SM-T800 and SM-T805 tab S 10.5 wifi/lte ONLY (only SM-T800 is supported for kitkat)
- this yTab ROM/kernel is currently built for SM-T800/SM-T805 only (exynos5420)
- other similar variants like SM-T800x, SM-T800y, SM-T800z etc are not officially supported
- those come with Snapdragon processors are NOT supported too
warranty void
- installing this ROM/Kernel can/may void your tablet's warranty, and resulted in Knox Warranty Void 0x1
overclock warning
- overclocking can reduce hardware life expectancy and can damage the hardware or tablet
- overclocking or under-volting results differ from device to device, and there is no such thing as best values for OC or UV
WHAT NOT TO EXPECT:
frequent updates
fancy installations
bugs free experiences
problems will be solved quickly/ultimately
individual/feature requests (i will listen, but no promise)
KERNEL FEATURES:
compiled with UBER Linaro 4.10 +Graphite
default stock kernel settings (at the moment for version 2.1)
ROM FEATURES:
swipe to resize window from top left/right
new simple restart option menu with custom settings
tabletUI+ (status bar with nav buttons just like tablet mode before on tablets)
preloaded with ViPER Audio Effect
custom boot animation support
enhanced UI speed, smoothness and responsiveness
dvfs disabled (cpu only)
all apps quad view/floating multi windows
dialer enabled for entering factory test secret codes, etc
supports permissive and enforcing selinux
secured storage disabled **1
5GHz wifi enabled supporting all frequency channels
supports synapse
supports private mode
working fingerprint sensor
S6 transparent accuweather widget
Note 4 SNote and action memo
**1 secure storage is bypassed but certain apps/functions depend on it may not run properly due to version mis-matched with kernel sources provided by samsung
SCREENSHOTS:
in post #3 below
DEFAULT SETTINGS:
max popup windows set to 4 (default 3), can be customized
reboot prompt disabled
flight mode is removed from reboot menu
selinux set to permissive
persistent recent apps disabled (no recent apps history will be shown in next boot)
TODO:
port more features from yTab 1.1 kitkat
android 5.1.1 port
add more S6/Note 4 apps
add more settings in yTab Synapse Control
custom kernel
KNOWN PROBLEMS:
incorrect status bar layout shown in lock screen
incorrect lock screen layouts
window mode toggle button in the tabletUI+ bar (the rightmost button on the left) is not yet implemented
ir blaster not working FIXED
some other minor issues
i have not tested all extra or stock features yet, especially for those apps/functions i don use but included in this rom for you guys only, so there may be some problems with certain apps or functions. kindly please report any problem so that i can take a look at that. thank you
CHANGELOG:
20151114
- yTab 3.0 Special Edition released
[*] 20151113
- yTab 2.6d2a Update (cumulative fix, includes and replaces previous 2.6d and 2.6d1 update)
- fixed problem for updating from 2.6c to 2.6d
- fixed installation problem with twrp
- re-added new wifi driver again (previous failure was due to problem with twrp)
[/list]
20151028
- yTab 2.6d1 Update (quick fix for some T800/T805 by undoing previous wifi related update in 2.6d)
- fixed broken wifi for T800/T805 after updating to yTab 2.6d Update below
20151027
- yTab 2.6d Update
- fixed fingerprint sensor may stop working in a few circumstances
- added back missing functions in yTab Synapse Control
- updated some drivers
20151018
- yTab 2.6c Full (Basic Edition)
- fixed launcher app name overlapping the app icon
- increased the font size of launcher app name
- added an option to remove the nav buttons finally! (against my design actually :crying: )
- some more 5.1.1 integrations
- system updated
- kernel updated (stock based) recompiled with linaro 5.2 (39k in antutu)
changelogs for older versions
20150902
- yTab Kernel 4.1a for T805 ONLY
- fixed data connection problem
- no other new features
20150822
- yTab 2.5b Update2 (includes yTab 2.5b Update below), AND
- fixed tw launcher home grid layouts
20150821
- yTab 2.5b Update (requires 2.5a)
- fixed tw launcher FC when rotate to port mode due to temporary removal of wip features before launch
20150820
- yTab 2.5a Update
- yTab Synapse Control 2.5
- added android 5.1.1 apps and framework
- some features and updates from android 5.1.1
- supports samsung s6 theme center/theme store
- smart manager with working battery optimization
- new launcher** (no custom grid size support yet, some layout issues in port mode, minor icon text problems in landscape mode)
- new gallery/phone/contacts/messages/splanner, etc
- gps fixed
- updated notification list
- added options to disable fingerprint sensor/knox/audit log in yTab Synapse Control
- added options to disable network traffic meter
- added options to customize text color of network traffic meter
- added optional hidden power button by tapping on the system clock at status bar
- added options to remove sfinder and quick connect buttons
- sync problem fixed
- other system tunings
- other updates
20150714
- yTab 2.3b2 Installation Fix for T805 data connection problems
20150705
- yTab 2.3b Full for T800/T805 (includes yTab 2.3b1 and all other 2.x updates in one single pack and nothing more)
- yTab 2.3b1 Update for T800 ONLY with fixed unchangable timezone (kernel only)
20150618
- reuploaded yTab Kernel 4.3d1 beta for T805 with updated script for detecting T805 lte model correctly
- pls download this revised version if yTab Kernel 4.3d beta (released on 20150617) could not be installed on T805
20150617
- yTab Kernel 4.3d beta for T800 and T805 (tested on my T800 only, hence data connection/voice calls etc were NOT TESTED, pls provide feedback)
- added more memory tunings/management
- TZ (default HKT timezone) removed
- reduced the screen brightness during boot
- added back tap2wake (no settings UI yet, default settings: enabled=true, timeout=300secs, accepts power button press=true, requires double tap=true)
- the tap2wake function is temporarily enabled for testing but may be removed/affected by future kernel updates
20150610
- yTab Kernel 4.3a beta for T800 ONLY
- some more oc/uv kernel changes for cpu, gpu and memory (backport from yTab 1.x's default settings)
- more changes for power savings (lowered default voltage values)
- other performance tunings
20150531
- yTab Kernel 4.1 beta for T800 ONLY
- oc/uv enabled for both cpu and gpu
- some changes for power savings
- some other tunings
20150516
- yTab 2.3b1 for T805 ONLY
- fixed unchangable timezone and yTab Synapse Control problem
20150515
- yTab 2.3b (replacing 2.3a with modem problem fixed for T805 and SNote fc)
- yTab Synapse Control 2.3
- added custom TW layout
- new tabletUI+ nav buttons (custom images support in next update)
- added toggle for network traffic meter on the status bar (custom options later)
- removed error message in yTab Synapse Control when no extsd is inserted
- TW launcher updated
- some fonts updated from S6
- added S6 sound files
- some other system and framework updates
20150501
- yTab 2.2 Update for SM-T800 and SM-T805
- yTab Synapse Control 2.1
- added Note 4 SNote and action memo with hand writing recognition and sync (you may need to update your sammy keyboard's under samsung keyboard settings -> select input languages -> select update in menu and update the language update files available, as to have hand writing recognition)
- added S6 Accuweather transparent widget (weather info in port mode only atm)
- further reduce the min size for floating popup windows (about 1/4 of the screen)
- added persistent recent apps toggle
- some other updates/fixes
20150424
- yTab 2.1b Update for SM-T800 and SM-T805
- fixed SMemo fc
- fixed weird SPlanner bug
- disabled unneeded service (SM-T800)
- added phone call recording (SM-T805)
- disabled ascending ringtone (SM-T805)
- added some other contacts/sms/voice call features (SM-T805)
- other updates/fixes
20150419
- yTab 2.1a Update for SM-T800 and SM-T805
- allow apps to access external sdcard
- some minor updates
20150415
- yTab 2.1 Full for SM-T800 and SM-T805
- initial release
INSTALLATION:
## IMPORTANT ##
DO NOT wipe the cache partition after the installation as this will break some functions, otherwise you will need to re-apply the latest update
for new users (fresh installation):
remember to make a backup first
I WILL NEVER format your partition or wipe anything for you (except reformat util), please wipe the system/data/cache partitons yourself before install
put the files in sdcard or external sd and install them in recovery (only tested with cwm)
after installed, you can start yTab Synapse Control and change any settings you desire
for existing users (applying updates):
check your current version by opening yTab Synpase Control and see if the version required for the update is met
install the update file in recovery
if applicable, you can apply more updates in the same recovery session without the need to reboot between updates
install multiple updates files in sequence according to the release dates with older files first
FAQ:
[1] how to wipe the partitions properly?
a) for cwm:
wipe and format options -> custom format options -> choose format /system, /cache and /data
b) for twrp:
wipe -> under select partitions to wipe page -> choose cache, data and system
[2] why only the back button at the top works but not others/no synapse can be found after installing yTab/synapse doesnt work properly?
a) most likely you have installed a custom busybox after installing yTab which breaks the predefined symlinks
- to solve this problem, see if it works after uninstalling the custom busybox
b) you have not wiped the partitions properly before installing yTab and thus causing problems with a mixture of old and new system and data
- as to fix this problem, please refer to FAQ #1 for a how to wipe the partitions properly
[3] could not find or missing VPN/google contacts sync/email/exchange, etc after yTab is installed
some apps were removed from the rom (debloated)
- please get them in the removed apps section below, or post a request for the apps you need if they are not available yet
[4] yTab Synapse Control always shows json parse error
get and upload the uci.log file to your online storage by issuing the following command in terminal emulator and then send the link to me via pm (do not paste the log contents in the pm, thanks)
Code:
rm /res/synapse/config.json; uci config > /sdcard/uci.log
DOWNLOADS: (NO mirror please)
By downloading or using any file here you agree that I am not responsible for any loss or damage whatsoever caused to your devices. So download or use at your own risk
Latest Versions
**Note: updates are not cumulative unless stated
20151113
yTab-Chagall-2.6d2a-Update.zip (includes previous 2.6d and 2.6d1 updates)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
primary - pcloud
mirrors provided by @happydish
mirror 1 - DevHost
mirror 2 - mega
size: 11.3MB
md5: 9E31A6DD8A611C5AEE23E2C14C7D3F78
- requires yTab-Chagall-2.6c1-Full (fresh install)
- cumulative fix for 2.6d and/or 2.6d1 updates
- if it shows "ROM: 2.6d" in yTab Synapse Control after installing this update, that means it's a success, else the update is failed
[*] 20151028
yTab-Chagall-2.6d1-Update.zip *** Quick Fix: T800/T805 broken wifi fix for yTab-Chagall-2.6d-Update.zip
primary - pcloud
mirrors provided by @happydish
mirror 1 - DevHost
mirror 2 - mega
size: 2.63MB
md5: 493744E5FA0F4802373BF3A093C0AEE7
[/list]
20151027
yTab-Chagall-2.6d-Update.zip *** broken wifi for T800/T805 reported
primary - pcloud
mirrors provided by @happydish
mirror 1 - DevHost
mirror 2 - mega
size: 11.3MB
md5: D1E4081F9876653C9C3A641714157BB1
- requires yTab-Chagall-2.6c1-Full
20151018
yTab-Chagall-2.6c1-Full.zip (Basic Edition)
primary - pcloud
mirrors provided by @happydish
mirror 1 - DevHost
mirror 2 - mega
size: 902MB
md5: CFA457FCA11FEFE00062B8C561668194
- for T800 and T805 (cant send sms)
- NO CPU/GPU OC/UV, Tap2Wake (DT2W), in Basic Edition
- wipe data, dalvik-cache, cache, system BEFORE install
- to avoid samsung account sync problem, it is suggested to start the Galaxy App in the first boot after install
- some removed apks can be found in Removed apks section below
2.3x -2.5x versions
20150902
boot-yTab-chagalllte-4.1a.zip
primary - pcloud
size: 6.61MB
md5: 67E5165621D9F39593D11BBD5F80AC6E
- for yTab 2.x T805 version ONLY (should be fine with yTab 2.1 or later)
20150822
yTab-Chagall-2.5b-Update2.zip (replacing yTab-Chagall-2.5b-Update.zip released on 21/8)
primary - pcloud
size: 6.25MB
md5: 20BCE6D0C3AEC623D62FD18B33D15E9A
note
- quick fix for yTab-Chagall-2.5a
- need to have 2.5a installed first (listed below)
20150820
yTab-Chagall-2.5a-Update.zip
primary - pcloud
size: 271MB
md5: C71BAA61A97C93FD679833F12F151592
note
- requires yTab-Chagall-2.3x
- no need to wipe anything
20150714
yTab-Chagalllte-2.3b2-Installation-Fix.zip
primary - pcloud
size: 2.05MB
md5: CB9EB27B0A41EAA6A6AF5A0BD220A337
note
- for T805 only
- fixes for data connection problems on T805
- need to install yTab-Chagall-2.3b-Full first
20150705
yTab-Chagall-2.3b-Full.zip
primary - pcloud
size: 997.2MB
md5: 64a8557834aea6021924fa7f52ab4a49
yTab-Chagallwifi-boot-T800-2.3b1-Update.zip
primary - pcloud
size: 6.5MB
md5: 6778afdfd95c99ed5b5ac6080dca7b76
note
- cwm is STRONGLY RECOMMENDED , especially for t805 users as twrp wont detect the correct model, or else may end up with a t800 installation (no harm except modem etc missing)
- read changelogs above for file description
20150516
yTab-Chagalllte-T805-boot-2.3b1-Update.zip
primary - pcloud
importance: HIGH
size: 6.62MB
md5: B0A79EA9A7A4E597CB8B9E82A7F5BF02
** NOTE **
- for yTab 2.x and T805 ONLY
20150515
yTab-Chagall-2.3b-Update.zip for SM-T800/SM-T805 (replacing 2.3a update released on 14/5 and contains all 2.3a changes)
primary - pcloud
mirror - mediafire
size: 327MB
md5: D99E4C35F9A5C612A3E3554DD924C280
** NOTE **
- REQUIRES yTab 2.2 update installed
- fixed SNote fc and T805 modem problem in 2.3a
- in general, NO WIPE is needed, but u can wipe dalvik-cache if u want to remove orphan files
- existing TW launcher settings and widgets will be CLEARED and RESET to default due to the TW launcher upgrade
- there is a minor issue that causes a few seconds delay before the launcher home is shown during boot
- upon the first boot after installation is finished, all dalvik-cache files will be rebuilt and this process takes about 7-8 mins (depends on number of apps installed) due to framework file changes
yTab-Chagall-2.3a-QuickFix.zip for SM-T800/SM-T805 (ONLY for those with 2.3a)
primary - pcloud
size: 30.4MB
md5: 04C2A9A4A404846EAE8344990645F6F3
** NOTE **
- quick fix for 2.3a which fixed SNote fc and T805 modem problem
- only contains the files needed for fixing the problems mentioned above
- if in doubt, get yTab-Chagall-2.3b-Update.zip
2.1x and 2.2x versions
**Note: yTab 2.1 Full is mandatory for all 2.1x and 2.2x update files
20150501
yTab-Chagall-2.2-Update.zip for SM-T800/SM-T805
primary - pcloud
mirror - mediafire
size: 137MB
md5: 706648532360BCB0722B9B18A39899E1
** NOTE **
- REQUIRES yTab 2.1b update installed
20150424
yTab-Chagall-2.1b-Update.zip for SM-T800/SM-T805
primary - pcloud
mirror - mediafire
size: 18.3MB
md5: CFC7A32A6031C4EFEBEF0C280B879731
** NOTE **
- REQUIRES yTab 2.1a update installed
20150419
yTab-Chagall-2.1a-Update.zip for SM-T800/SM-T805
primary - pcloud
mirror - mediafire
size: 35.4MB
md5: 15DBA140E3D748445D7D6FD2B3786D5A
20150415
yTab-Chagall-2.1-Full.zip for SM-T800/SM-T805
primary - pcloud
mirror - mediafire
size: 785MB
md5: EAB2FCCDB0CDFCD87390122ED1115606
** NOTE **
the kernel included in this yTab 2.1 is compiled with default stock kernel settings, so please DO NOT EXPECT huge performance boost
** INSTRUCTIONS **
cwm is SUGGESTED since some twrp versions caused problems as reported by users
for existing Lollipop users:
- data/dalvik-cache wipe is SUGGESTED
- a system partition wipe is STRONGLY RECOMMENDED
- requires a working modem installed for the lte model (not included)
for users with kitkat rom:
- flash a stock lollipop rom BEFORE INSTALLING yTab 2.1 is RECOMMENDED, or at least the bootloader
Removed apks
** Note: install in recovery
For yTab 2.6+
SecEmail
size: 13.1MB
md5: C4B21F17D1AFDCFE85567B71D816CA17
Kies_MtpApplication
size: 13.1MB
md5: BA2442816BA40671A85A7C223B3744C5
Previous Addons
ClockPackage and DualClockDigital
size: 9.13MB
md5: 11EFB730AFECE3A0E01CE6DD4118DF3A
GoogleContactsSyncAdapter
size: 2.25MB
md5: 3BD5E7F537FBE34ADB87D73010B23BB7
SecEmail and SecExchange
size: 23.9MB
md5: FD3D072A9BBE2F19076AF21C13E4B1DC
VpnDialogs
size: 2.11MB
md5: 509E75D1C713DDB23F260009B76A0165
If you like it please consider to make a donation to buy me a beer or coffee by clicking here. Thank you!
DONATIONS:
thank you very much. really appreciated
barth2
Anonymous (Transaction ID: 4MJ78261612182228)
CREDITS:
thanks for granting me permissions to use some of their works:
DerTeufel1980
halaszk88
xluco
special thanks to:
AndreiLux for the synapse
xperiacle for the air command shortcut or otherwise i have to make one
zhuhang and ViPER520 for the ViPER Audio Effect
tatosXL for his art works Compacticons (** some images may have been resized/modified by me)
SOURCES:
yTab 1.x
Perseus-UNIVERSAL5410 by AndreiLux
Devil2 Kernel by DerTeufel1980
halaszk-UNIVERSAL5420 by halaszk88
Xluco Kernel by xluco
CyanogenMod
Samsung Open Source Release Center
.
XDA:DevDB Information
yTab, ROM for the Samsung Galaxy Tab S
Contributors
ykkfive
ROM OS Version: 5.1.x Lollipop
Version Information
Status: Stable
Current Stable Version: yTab 1.1a/2.6d2a/2.7
Stable Release Date: 2016-04-29
Created 2014-11-28
Last Updated 2016-05-05
yTab 1.x (kitkat)
KERNEL FEATURES:
compiled with UBER Linaro 4.10 +Graphite
f2fs/ext4/ext2 support
single/double tap2wake with custom options
set to permissive selinux by default
cpu freq from 100 to 2400MHz **2
gpu freq from 100 to 733MHz
max memory freq increased to 933Mhz
custom voltage settings for cpu **3/gpu/memory **4
custom settings for audio/charging, etc **5
**2 stable max cpu freq is 2000MHz (default 1900MHz for safety), while max cpu freq observed is 2100MHz so far but crashed a lot (temperate around 25-29C)
**3 default voltage for cpu = stable value observed + 20mV
**4 default voltage for gpu/mem = stable value observed + 30mV
**5 via my yTab Synapse Control or sysfs
ROM FEATURES:
android lollipop like flat style colored status bar with same color as current app
custom TW launcher app icons grid from 3x3 to 10x10
custom/auto TW launcher app icon size
full window/windowed mode toggle
chinese lunar calendar
tabletUI+ (status bar with nav buttons just like tablet mode before on tablets)
supports mixed file systems of your choice, eg cache in ext4 and others in f2fs
custom boot animation support
enhanced UI speed, smoothness and responsiveness
dvfs disabled (cpu only atm)
all apps quad view/floating multi windows in both side bar or air command (spen) window
air command **1
dialer enabled for entering factory test secret codes, etc
knox removed
toggle between permissive and enforcing selinux
secured storage disabled **2
simple restart option menu
semi-transparent menu/dialog, etc
5GHz wifi enabled supporting all frequency channels
supports synapse
**1 action memo, finder, screenshot, air command (spen) window
**2 secure storage is bypassed but certain apps/functions depend on it may not run properly due to version mis-matched with kernel sources provided by samsung
SCREENSHOTS:
in post #3 below with new yTab 1.1 screenshots
DEFAULT SETTINGS:
tap2wake is enabled by default with 5 seconds delay (will set it longer in the next kernel update)
double tap is required to wake up the device by default instead of single tap
power key press is ignored by tap2wake but can be changed
selinux set to permissive
cpu freq - min: 100MHz, max: 1900MHz (should be safe to set 2000MHz max, have been running for months)
cpu freq big cores - min: 800MHz, max: 1900MHz
cpu freq little cores - min: 100MHz, max: 900MHz
gpu freq - min: 100MHz, max: 733MH
interactive cpu governor (recommended)
TODO:
add more settings in yTab Synapse Control
add color balance/control
4.4.4 migration
include some Note 4 features including new air command, air clip, multi win, etc
start (really) to bring back my favorite TabletUI
KNOWN PROBLEMS:
secured storage and other apps or features depend on it like private mode wont work properly FIXED
draw target window action in air command not working (not going to fix it for kitkat)
no sound from left speaker (blame me for didnt notice that, my left ear has some problem, sorry) FIXED, temp solution here, ultimate fix will be included in the next update
failed to launch yTab Synapse Control 1.01 FIXED, please update to yTab-chagallwifi-1.01a-update
private mode not working FIXED
maildroid and skype not working FIXED
IR blaster doesnt work
floating windows showing home screen sometimes when back key is pressed FIXED
have to apply the tw grid setting every boot in synapse manually due to my fault FIXED
i have not tested all extra or stock features yet, especially for those apps/functions i don use but included in this rom for you guys only, so there may be some problems with certain apps or functions. kindly please report any problem so that i can take a look at that. thank you
CHANGELOG:
20150325
- yTab 1.1a (Full and Update)
- fixed tw grid size not applied after boot
20150324
- yTab rom 1.1 with yTab synapse control 1.1
- added android lollipop like flat style colored status bar with inverted icons (may not tinted correctly for some apps, eg after switching category in google play)
- added new function to custom TW launcher icons grid from 3x3 to 10x10 on the fly without the need to download separate versions (app menu icons only)
- added ability to custom TW launcher app icon size or auto resize according to number of app icons (affects all app icons including home/hotseat etc)
- added a toggle to switch between full window/windowed mode in tabletui+ (certain apps refused to switch back to windowed mode from full screen)
- added a chinese lunar calendar to the expanded pull down menu
- added control over a new app launched by the current app (eg browser lauches google play and u cannot switch between them before, now u can)
- reduced apk and jar file sizes to free more system disk spaces (some only atm)
- added tap2wake 20 and 30 mins delay options
- added back the hidden AppOps, an application permissions manager for blocking apps permissions
- floating windows showing home screen sometimes when back key is pressed problem fixed
- viper sound effect preloaded (ViPER4Android FX v2.3.4.0)
- many more changes
CHANGELOG FOR PREVIOUS VERSIONS:
20150130
- yTab ROM 1.03a
- fixed rotation problem
- will install yTab Synapse Control if not yet installed
- added back google contact sync
- yTab ROM 1.03
- tabletui+ (status bar with nav buttons in one bar like tablet mode)
- added voice note from Note4
- replaced magazine calendar widget with SPlanner widget (a bit smaller than full screen widget atm)
- some apps updated to Android 4.4.4 version
- no more sdcard notification after boot up, but u will get the notification if u insert or remove the sdcard thereafter
- material light theme keyboard
- enhancements in terms of smoothness and performance
- other tunings and fixes that I cant remember
20150107
- yTab synapse control 1.01b
- fixed tap2wake setting not saved
- note that the power button option changed from "IGNORE" to "ALLOW", ie a reverse value is required
- some other changes
20141225
- fixed yTab-chagallwifi-1.02-Full not installed properly
for new users:
- just get the revised version (yTab-chagallwifi-1.02-Full-with-Patched-Installer.zip)
for those who downloaded the previous 1.02 Full file before:
- please get and install the patch file (yTab-chagallwifi-1.02-Full-PATCH.zip)
- the patch will update the 1.02 Full file downloaded before, and thus no need to redownload the revised file again
- read the instructions below in download section for details
20141214
- rom version: 1.02 Full (for new users or fresh install)
20141201
- rom version: 1.02
- DDU1ANK1 update
- skype and maildroid startup problems fixed
- less glitches when using floating windows and rotating but may still have some minor problems
- selinux can be toggled between permissive and enforcing now safely
- private mode now working properly
- secure storage bypassed
20141116
- yTab 1.0x removed apks added
20141115
- rom version: 1.01a
- yTab synapse control version: 1.01a
- problem launching yTab Synapse Control fixed
20141114
- yTab synapse control version: 1.01
- UI for setting Tap2Wake options added
20141112
- rom version: 1.01
- some clean up and minor fixes
- fixed synapse not showing in the app menu
- added back Quick Action Memo, Air Command and CSC files
- added official Note 4 wallpaper (2560x2560)
20141111
- initial yTab release for SM-T800
- kernel version: chagallwifi-3.0p
- rom version: 1.0
- yTab synapse control version: 1.0
INSTALLATION:
for new users (fresh installation):
remember to make a backup first
I WILL NEVER format your partition or wipe anything for you (except reformat util), please wipe the system/data/cache partitons yourself before install
put the files in sdcard or external sd and install them in recovery (only tested with cwm)
after installed, you can start yTab Synapse Control and change any settings you desire
for existing users (applying updates):
check your current version by opening yTab Synpase Control and see if the version required for the update is met
install the update file in recovery
if applicable, you can apply more updates in the same recovery session without the need to reboot between updates
install multiple updates files in sequence according to the release dates with older files first
DOWNLOADS: (NO mirror please)
By downloading or using any file here you agree that I am not responsible for any loss or damage whatsoever caused to your devices. So download or use at your own risk
Latest Versions
**Note: updates are not cumulative unless stated
20150325
yTab-chagallwifi-1.1a-Full.zip
importance: moderate
size: 1.10GB
md5: 849F8526462B8E4CB93FB446FDF72950
** NOTE **
- this is a FULL VERSION which includes all previous changes, including yTab-chagallwifi-1.1a-update below
** INSTRUCTIONS **
for existing yTab users:
- data/dalvik-cache wipe is NOT a must for EXISTING USERS with yTab installed
- a system partition wipe IS STRONGLY RECOMMENDED
for users with other roms installed:
- WIPE data, dalvik-cache and system partition BEFORE INSTALL
yTab-chagallwifi-1.1a-update.zip
importance: HIGH
size: 2.05MB
md5: 1E9417F9AD76ABF426BF67B081B0D5A1
** NOTE **
- this is an UPDATE for VERSION 1.1
- for yTab version 1.1 ONLY
** INSTRUCTIONS **
- install the zip in recovery as usual
Archived Versions
20150324
BUG: have to apply the tw grid setting every boot in synapse manually due to my fault. will get it fixed soon, sorry
yTab-chagallwifi-1.1-Full.zip
importance: moderate
size: 1.10GB
md5: AD61543729B0EA63D14E9BF267A1A4BA
** NOTE **
- this is a FULL VERSION which includes all previous changes
** INSTRUCTIONS **
for existing yTab users:
- data/dalvik-cache wipe is NOT a must for EXISTING USERS with yTab installed
- a system partition wipe IS STRONGLY RECOMMENDED
for users with other roms installed:
- WIPE data, dalvik-cache and system partition BEFORE INSTALL
[*] 20150130
yTab-chagallwifi-1.03a-Update.zip
importance: high
size: 4.76MB
md5: 97C9F924185881293CCD7CC9081C1A50
** NOTE **
- this is a fix for v1.03 Full
- it REQUIRES yTab-chagallwifi-1.03-Full.zip below
yTab-chagallwifi-1.03-Full.zip
importance: moderate
size: 1.18GB
md5: 18543BBDDADF0C76524131F14AE4CED4
** NOTE **
- this is a FULL VERSION which includes all previous changes
** INSTRUCTIONS **
for yTab users:
- data/dalvik-cache wipe is NOT a must for EXISTING USERS with yTab installed
- a system partition wipe IS STRONGLY RECOMMENDED
for users with other roms installed:
- wipe data, dalvik-cache and system partition before install
[/list]
20150107
yTab-synapse-control-1.01b.zip (for existing users with yTab synapse control version 1.01a)
importance: moderate
size: 683KB
md5: CB07179660F36C9B0C24838B3E574C9B
20141225
yTab-chagallwifi-1.02-Full-with-Patched-Installer.zip
importance: high
size: 1.09GB
md5: 885ED4F6D23F3D6B2CE49252E38E23CC
** NOTE **
- this is a new build with the installation problem fixed
- this file is a revised version of the previous released yTab-chagallwifi-1.02-Full.zip
- NO NEED to get the patch yTab-chagallwifi-1.02-Full-PATCH.zip below
yTab-chagallwifi-1.02-Full-PATCH.zip (ONLY for previous yTab-chagallwifi-1.02-Full.zip downloaded before 25Dec2014 2300 HKT)
importance: high
size: 3.11MB
md5: D3ABF83480D29723DDF74912991647C0
** INSTRUCTIONS **
1. make sure you have wiped/reformatted both /system and /data partition (not internal sdcard)
2. place this patch file in the same folder as yTab-chagallwifi-1.02-Full.zip (VERY IMPORTANT)
3. install this patch file in recovery
4. after the patch is installed, choose and install yTab-chagallwifi-1.02-Full.zip to continue the installation of 1.02 Full (no need to reboot)
20141201
yTab-chagallwifi-1.02-update.zip (for existing users with yTab ROM version 1.01a)
importance: high
size: 141MB
md5: 8C783297FA3F501C336DC80B2FFC59CB
20141115
deprecated yTab-chagallwifi-1.01a-update.zip (includes both yTab ROM 1.01a and yTab Synapse Control 1.01a updates)
importance: high
size: 1.07MB
md5: 5D1763B055AC771702AD1E567A4AFABB
20141114
deprecated yTab-synapse-control-1.01.zip
size: 1.06MB
md5: ABC9A49E4E210BC4E726F758A6C8F2BB
20141112
deprecated yTab-chagallwifi-1.01-update.zip (for those with yTab 1.0 installed only)
size: 83.8MB
md5: CA71BFFD1FC2280A7F8B6E569FC758B1
deprecated yTab-chagallwifi-1.01-Full.zip (single file for new users with all files above included)
importance: high
size: 1.10GB
md5: EE59EA34E1A1F7599C20388B8B0E1F52
20141111
deprecated yTab-chagallwifi-1.0.zip
size: 1.02GB
md5: 78674EFF09060B99DB4CE3A08DA504B3
deprecated yTab-synapse-control-1.0.zip
size: 1.03MB
md5: 52687933FC4AA68932B3C77A063F7EB5
Removed apks
** Note: these are NOT recovery install zip files, extract the zip and put the files in the location specified (/system/app/ or /system/priv-app/), and chmod to 644
yTab 1.01x - Kies and MTP Application (already included in version 1.1)
location: /system/priv-app/
size: 113KB
md5: 8B253341A9D0A0A3ADF8D126D1450D8A
yTab 1.x - app folder
location: /system/app/
size: 294MB
md5: FAC97227B8DD2634CCA487E8F90F560F
file list
AccuweatherTablet2014_BG_WQXGA.apk
AllShareCastPlayer.apk
AllshareControlShare.apk
AllshareFileShare.apk
AllshareFileShareClient.apk
AllshareFileShareServer.apk
AllshareMediaServer.apk
AllshareMediaShare.apk
AntHalService.apk
ANTPlusPlugins.apk
ANTRadioService.apk
BBW.apk
Blurb.apk
Books.apk
Bridge.apk
ChocoEUKor.apk
Chrome.apk
ColorBlind_tablet.apk
CoolEUKor.apk
Drive.apk
Dropbox.apk
DropboxOOBE.apk
EdmVpnServices.apk
ELMAgent.apk
EmergencyLauncher.apk
EmergencyModeService.apk
EmergencyProvider.apk
Evernote.apk
Flipboard.apk
FWUpgrade.apk
GearManagerStub.apk
Gmail2.apk
GoogleContactsSyncAdapter.apk
Hangouts.apk
KNOXAgent.apk
KnoxAttestationAgent.apk
KnoxSetupWizardClient.apk
LocalFOTA.apk
Magazines.apk
MobilePrint4.apk
MobilePrintSvc_CUPS.apk
MobilePrintSvc_CUPS_Backend.apk
MobilePrintSvc_Epson.apk
MobilePrintSvc_HP.apk
MobilePrintSvc_Samsung.apk
MobilePrintSvc_WFDS.apk
Music2.apk
MusicLiveShare2.apk
NYTimes.apk
PeelTab.apk
PhotoTable.apk
PlayGames.apk
PlusOne.apk
QuickConnect.apk
QuickConnectInteraction.apk
RemotePC.apk
RoseEUKor.apk
SafetyInformation.apk
SamsungContentsAgent.apk
SamsungSans.apk
SamsungWatchON.apk
SamsungWidget_ActiveApplication.apk
SapaMonitor.apk
SBrowserTry.apk
SCONE_Android_ProxyService_NoLib.apk
SecEmail_Tablet.apk
SecExchange.apk
SecKidsModeInstaller.apk
SecTabletClockPackage.apk
SecTabletDualClockDigital.apk
Sidesync.apk
Sidesync_Player.apk
Sidesync_Source.apk
SPrintSpooler2.apk
TravelService_K.apk
Videos.apk
WeatherDaemon2014.apk
WebExMeetings.apk
WebManual.apk
WfdBroker.apk
yTab 1.x - priv-app folder
location: /system/priv-app/
size: 82MB
md5: 78CA1A0729EE874745EF76FCD8C7CA6A
file list
BackupRestoreConfirmation.apk
ConfigUpdater.apk
ContentSearch.apk
ContextProvider.apk
FotaClient.apk
GoogleBackupTransport.apk
GoogleFeedback.apk
GoogleOneTimeInitializer.apk
HancomOffice_Shared.apk
HancomUpdater.apk
hanviewerlauncher.apk
hanwidget.apk
hcellviewer.apk
Hearingdro_music_v1_B.apk
hshowviewer.apk
hwordviewer.apk
intelligenceservice_1.0_alpha1.apk
Kies.apk
KLMSAgent.apk
MagazineBriefingWidget.apk
Msa.apk
MtpApplication.apk
MusicFX.apk
Netflix.apk
NoiseField.apk
NokNok_Stub_Chagall.apk
PhaseBeam.apk
SamsungMagazine.apk
SamsungMagazineWidget.apk
SFinder.apk
ShareVideo.apk
SoundAlive_Tablet.apk
S-Voice_Android_tablet_vlingo.apk
TrimApp_tablet_dark.apk
VpnDialogs.apk
If you like it please consider to make a donation to buy me a beer or coffee by clicking here. Thank you!
kernel source diff for yTab 1.x (T800XXU1ANF8)
SCREENSHOTS:
yTab 2.5 screenshots
new setup wizard
theme store
themes applied
new launcher (home: 8x6 + 10 hotseats, app: 6x4, will be changed later)
splanner
phone
message
wallpaper picker
weather
transparent weather widget
gallery
contacts
smart manager - battery optimization
yTab 2.3 screenshots
7x6 custom grid, auto icon size
5x4 custom grid, auto icon size
5x4 custom grid, fixed icon size
yTab 2.2 screenshots
smaller popup windows size
S6 accuweather transparent widget and Note4 SNote widget
yTab 2.1 screenshots
new simple reboot menu without prompt
resizable calendar widget
permissive selinux
swipe to resize window
resized window with controls
drag to move the window
multiple popup windows
quad windows with popup windows in different sizes plus minimized windows
swapping between windows
keyboard with material design, plus arrow keys like previous version
modified long press key options with upper case letter, accents symbols removed
yTab 1.x screenshots
10x5 with auto icon resizing
3x3
4x4
9x4 with auto icon resizing
9x4 with user defined icon size
flat style status bar with immersive mode disabled and lollipop style ui controls
flat style status bar with inverted icons
added back appops
material light theme keyboard and TabletUI+
new performance test 10 jan 2015
new performance test 10 jan 2015
standy battery consumption 1
standy battery consumption 2
selinux set to permissive
selinux set to enforcing
antutu 5.2 benchmark
my highest score so far (ranked at 19th before MX4 launched ...)
simple restart option menu
action memo
note pro keyboard with tab and arrow keys
air command and pen/multi windows
BETA DOWNLOADS:
By downloading or using any file here you agree that I am not responsible for any loss or damage whatsoever caused to your devices. So download or use at your own risk
** due to unable to fix the screwed up kernel sources and publish here in time as per request by a member, all beta kernel download links are removed from this post in order to comply with the sharing policy
no eta about when it will be available again here
- Files listed here are regarded as beta files, which may be buggy or produce unexpected results and you have been warned
- By downloading or using any file here you agree that I am not responsible for any loss or damage whatsoever caused to your devices. So download or use at your own risk
20150618
boot-yTab-chagalllte-4.3d1.zip for T805 (beta)
link removed
size: 8.49MB
md5: 687A6D7DD5D4B48D6873E3B4556AAA94
** NOTE **
- this is a revised version (replacing boot-yTab-chagalllte-4.3d.zip uploaded on 20150617) with updated script to detect a T805 lte correctly
- boot-yTab-chagalllte-4.3d1.zip has been tested on my T800 only, hence data connection/voice calls etc were NOT TESTED
20150617
boot-yTab-chagallwifi-4.3d.zip for T800 (beta)
link removed
size: 6.74MB
md5: B21EA662C9611C973105720ED0E7BCFD
20150610
boot-yTab-chagallwifi-4.3a.zip for T800 (beta)
link removed
size: 6.72MB
md5: 20B3CA1C7452C2CE01997F9B70885271
** NOTE **
- for yTab 2.x and T800 ONLY
20150531
boot-yTab-chagallwifi-4.1.zip for T800 (beta)
link removed
size: 6.58MB
md5: 6E04DA21068040976072031B7C363053
** NOTE **
- for yTab 2.x and T800 ONLY
- IT WONT make your tablet flies
Thanks for sharing!
thanks for the hard work,any chances of a 700 port ?
mordeith said:
thanks for the hard work,any chances of a 700 port ?
Click to expand...
Click to collapse
not very likely atm to be frank. and I prefer not to make roms for the device I don own since I cant test them myself
let see what happen later, but I cant make any promise
link download takes forever can you provide a different link? Thanks
Just downloaded, installed with TWRP everything runs fine....need a day or two to see how it goes...so fa so good. Thanks for the hard work. BTW flash synapse control but don't see anything and so is floating window and hoover.
naomile said:
link download takes forever can you provide a different link? Thanks
Click to expand...
Click to collapse
yeah, i find pcloud is slow too these few days. but unfortunately dropbox was slow too last nite
naomile said:
Just downloaded, installed with TWRP everything runs fine....need a day or two to see how it goes...so fa so good. Thanks for the hard work. BTW flash synapse control but don't see anything and so is floating window and hoover.
Click to expand...
Click to collapse
my mistake, will be corrected in the 1.01update together with other fixes
20141112
yTab-chagallwifi-1.01-update.zip (for those with yTab 1.0 installed only)
changes:
- some minor updates and cleanup
- added back Synapse (will now shows in app menu)
- added Quick Action Memo, Air Command and CSC files
EDIT
yTab-chagallwifi-1.01-Full.zip is ready (for new users, 1 single file)
my computer can't see the tab S ? either with MTP or PTP .
added
Kies and MTP Application for those who need them (in post #1)
Note: this is NOT a recovery install zip, extract the zip and put the files in /system/priv-app/ folder
naomile said:
my computer can't see the tab S ? either with MTP or PTP .
Click to expand...
Click to collapse
just added, busy editing 1st post before, sorry about that
no sound from left speaker FIXED, driver problem
quick solution:
please put a check in ytab synapse control->audio->enable speaker equalizer
will try to fix this in the next update
It may be a silly question but which is the base for yTab: Samsung Rom (if so, which version) or Cyanogenmod 11?
hurray said:
It may be a silly question but which is the base for yTab: Samsung Rom (if so, which version) or Cyanogenmod 11?
Click to expand...
Click to collapse
it 's sammy stock, current rom version xxu1anj5/6
Ahh, thanks for the answer and of course you're whole work.
I thought about to try the kernel on CM11 so it was good to ask before flashing.
hurray said:
Ahh, thanks for the answer and of course you're whole work.
I thought about to try the kernel on CM11 so it was good to ask before flashing.
Click to expand...
Click to collapse
i see. it's not compatible with cm
@ykkfive I Tryed to flash your kernel/rom again to check out the speaker fix .The keyboard disappears after I flash 1.01 so I can not continue on. Not sure what the problem is? Keyboard setting says its set at default.
Warnig,this rom is only for Qualcomm version of RedMI Note 3
New Features
Introducing new design
Introducing Second space
Dual app support for most apps
Long screenshots
New Calculator
Introducing Quick ball
New templates for Notes
Redesigned Gallery
Smart menu for editing text
Highlights
New - App lock: Unlock all apps at once (06-23)
New - Deleting Second space while in First space (06-29)
New - Saved and available Wi-Fi networks appear first in the list (07-05)
New - After a permission is restricted, a clickable notification is sent to the user which can restore permissions (07-05)
System
Optimization - Loading speed increased twice for the first reboot after OTA (support for 6.0 devices) (06-21)
Lockscreen, Status Bar, Notification Bar
New - Animation for successful Wi-Fi connection (07-07)
Optimization - Floating notification format for incoming calls (06-22)
Optimization - Separeter sound and vibration permissions for notifications (07-07)
Fix - Repetitions in Settings (06-22)
Fix - Errors on Wi-Fi details page (06-22)
Fix - An error whe tapping the white area of the Notification shade (07-07)
Fix - Couldn't enter Mi Home from lock screen with Second space on (07-07)Home screen
Optimization - Hid the switch icon when there are no current tasks (06-27)
Optimization - Fixed sound effect for deleting apps (07-07)
Fix - Wrong app was opened after long-pressing the app in Task manager (07-07)
Fix - The button for switching modes didn't work in Task Manager in some cases (07-07)
Settings
New - Deleting Second space while in First space (06-28)
New - Saved and available Wi-Fi networks appear first in the list (07-05)
File Explorer
Fix - Couldn't see files saved from dual apps (06-28)
Quick Ball
New - Tap gesture for Quick ball (06-30)
Flash mode : Fastboot (edl required)
Bugs : None (select clean all in MiFlash)
MIUI 8 Based on Android 6.0 Marshmallow, ROM for the Xiaomi Redmi Note 3 QCM
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: MIUI
Version Information
Status: Beta
Current Beta Version: 6.7.21
Beta Release Date: 2016-08-11
Created 2016-09-02
Last Updated 2016-09-02
Downloads
https://mega.nz/#!ORcCRBZD!c_78CJUAj9RQCjkBIKXkEBIhI0Bj0KHcLAVejuJEk5Y
emilutzzu said:
https://mega.nz/#!ORcCRBZD!c_78CJUAj9RQCjkBIKXkEBIhI0Bj0KHcLAVejuJEk5Y
Click to expand...
Click to collapse
What is different from this? If the same as it, please delete this thread (double post). He is already go to newer update
http://forum.xda-developers.com/redmi-note-3/development/mm-global-dev-6-7-21-fastboot-rom-t3423895