Related
[ROM][GB][JVO][6/8/2011]►Continuum v5.6◄i897/i896/i9088►Support forum is Live!◄
Update 13/6/2011: As I stated, I created a support forum for Continuum. I will continue announcing new releases and give support on xda. However, for those willing to find only Continuum related information and news, the link is below.
Continuum Community Support Forum
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
First of all, I assume NO RESPONSIBILITY to what you do to your phone! So flashing any of the files linked to in this thread is fully your own mature decision and I will not accept to be blamed for your failure in following the installation steps and understanding the information contained in this thread but mostly in the first 4 posts.
Important Note:
After flashing bootloaders the key combinations to enter recovery/download mode are as follows:
Recovery Vol UP + Power
Download Vol Down + Power or Vol Down + USB insert
It has been reported that an inverted combination (Vol Up instead of Vol Down) worked for some. Try that as well if you can't get the ones above to work
I recommend keeping RFS for best battery life.
As well, keep applications on internal memory, don't move the to the sdcard! Makes the loading slower and some things might not work as they should! You've been warned!
Any referral to Quadrand scores will be ignored!!
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Installation documentation
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Feature list
Modem I9000TDVJP9
Talon kernel
Tweaked Touchwiz 3 with landscape support.
Extended power menu
9 lockscreens. Lockscreen Wallpaper and sound can be set for all of them.
MMS/SMS removed from logs
Hacked camera: taking pictures/videos with power button and on low battery - you do not need to long press the power button to zoom, just press once and it zooms automatically before shooting.
Home haptic feedback and buttons light on touch fixed thanks to MikeMike01
Option to enable/disable GPS tagging in Camera
Phone without ascending ringtone.
Link voice call volume with notification volume option in Settings
Killed battery full notification.
Browser with user agent settings and tab limit increased to 8.
Separate tones for Volume setting (each volume intensity has a different sound when pressing the volume keys)
Removed several useless fields in Settings.
Added back keep the screen on in Development settings.
Wifi scan interval increased to 30 sec
Samsung Keyboard with 30 dictionaries for XT9
Bash shell
Simple scripts for fast mounting /system as ro and rw (just type ro or rw in the terminal emulator -requires su- or in a adb shell session)
3D rendering fixed
Tegra 2 Games capability
Perfect keyboard (replacing GB kb) thanks to for.digit
SIP configuration in Call settings
Landscape Dialer
Landscape Phone
Landscape GB Launcher with option to drop to uninstall
Sony ARC Launcher
Updated system apps.
Deodexed, rooted, zipaligned
maybe others that I forgot...
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Note: Most of the following instructions are valid assuming that you run a Windows machine and your device does not have updated boot loaders (see Galaxy S bootloaders section).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Caution measures:
Make sure you have a full battery
Make sure you have a JIG around just in case (some info about it here and here)
Make sure your cable is in a good status and that it will not cause any interruption between phone and PC while the flash process is ongoing
Make sure KEIS is not not running, you may install it to have the necessary drivers installed
This is difficult but make sure that your computer doesn’t tend to connect and disconnect randomly from USB devices. I cannot support or cover this in any way here, find resources by yourself.
Explanation of technical terms:
ODIN: ODIN is a closed source tool application used by Samsung to “download” the operating system onto a device while the device is in “Download Mode”.
Download Mode: Is a state of the device when the internal memory is made available to a tool hosted on a PC. The tool may then write data on the internal memory.
The internal memory, in this case, refers to the system reserved blocks not the user data blocks. The user data will not be touched while using such a tool (e.g. ODIN).
The Download Mode status can be achieved by using a key combination, ABD command or a custom made USB device aka JIG.
Ways of achieving Download mode using key combinations and ADB:
ADB – from recovery or normally booted with USB debug ON
If you don’t have adb already installed and configured, download this package, extract it somewhere and navigate to that folder in command prompt and type in
adb reboot download
Key combo
Remove the battery, sim, sdcard
Insert the battery back
Hold Volume UP + Volume Down and plug in the USB cable
...Or Hold Volume UP + Volume Down and Power button
Galaxy S BootloadersThink of a boot loader as a BIOS. If you don’t have them (bad flash), the phone needs serviced.
They are 2 and their usage is as follows:
Primary bootloader – boot.bin – used to perform low lever hardware initialization. Importance – HIGH!
Secondary bootloader – sbl.bin – loads the linux kernel and passes the necessary arguments. This is as well responsible for giving you download mode and recovery by using key combo (see Gingerbread update and how to go back to “stock” safely). Phones batch 1008 and newer do not have this capability due to a hardware lock of the feature. Importance – HIGH!
THEY NEED TO BE THE SAME REVISION! You cannot have a primary boot loader from a gingerbread release in tandem with a secondary boot loader from an Éclair or Froyo release. The phone will not boot and will need to be sent to Samsung or ATT for repair. If you find such a package, please address the issue to the creator so he can fix it by including the primary boot loader from the same revision.
How to find out if the firmware that you are going to flash contains boot loaders or not:
The firmware packages that can be flashed with ODIN have .tar or .tar.md5 extension. In both cases, you can open the file with 7zip
[FONT="]L[/FONT]ook inside the file and see if there is a boot.bin and sbl.bin.
Additional information about .rfs images
These images can be opened with MagicISO (shareware)
You can simply assign the program as default for this extension and you can open them just by double clicking.
Gingerbread update and how to go back to stock safely
Gingerbread focuses on graphical performance and I assume there was a need in changing several boot instructions, hence the need of updating the boot loaders.
By updating the boot loaders you take a risk of making your device unusable. However, the files are very small so the chance of this happening is somewhere below 1% (roughly calculated by comparing the number of downloads with the number of bricks)
There are 2 presumably safe ways to go back to stock 2.1
OdinOneClick Downloader – all information necessary is in the main thread – this will erase any trace of custom ROMs installed on your phone
Stock JF6 without boot loaders – all information necessary is in the main thread – this will erase any trace of custom ROMs installed on your phone except bootloaders
Stock JF6 with bootloaders and 3 button combo fix (not available yet!) – I will be working on creating this package – it will do the same as OdinOneClick Downloader except that it will add the 3 button combo fix
Unsafe ways to go back to stock
ODIN JF6 with 3 button combo fix – this will only downgrade the secondary boot loader leaving the primary one untouched. If you ever flash ODIN packages and is mentioned that they include boot loader(s) make sure that they include them both!! BY USING THIS METHOD TO GO BACK TO STOCK FROM MY ROM OR ANY OTHER GINGERBREAD ROM THAT UPDATED BOOT LOADERS, YOU WILL BRICK YOUR DEVICE!!
You may use this method ONLY AFTER using OdinOneClick Downloader as that method will revert the primary boot loader as well.
Actual installation steps:
Download latest version of Continuum and put it on sdcard
Optional - return to stock using this method
Optional - only if you dont have latest bootloaders (you can tell by looking at the first picture when you power up the phone, if is white ATT, you dont have the latest bootloaders) - install JVB bootloaders with ODIN in PDA section
download the bootloaders package
Flash this kernel (or any other kernel with CWM3) with ODIN in PDA section with Auto Reboot option unchecked
Pull out the battery and disconnect the cable after ODIN said "RESET"
Reboot in recovery using Volume UP + Power button
Install Continuum from sdcard.
Note: If you have gingerbread bootloaders perform this quick test:
go back to stock using the method i just described above (in the install instructions)
test orientation sensor - open browser and see if it reorients.
if it doesn't work, i recommend flashing again the bootloaders pack
Updates can be found in post number 2 and can be flashed from ClockWorkMod recovery 3 only.
Themes can be found here
Bug tracker
Important Note:
After flashing bootloaders the key combinations to enter recovery/download mode are as follows:
Recovery Vol UP + Power
Download Vol Down + Power or Vol Down + USB insert
It has been reported that an inverted combination worked for some. Try that as well if you cant get the ones above to work
I recommend keeping RFS for best battery life.
As well, keep applications on internal memory, don't move the to the sdcard! Makes the loading slower and some things might not work as they should! You've been warned!
Come chat with us on irc at #project-continuum
As usual, donations are highly appreciated! I do this mostly for fun but a little more motivation always speeds things up
Thanks go to:
eXistZ for the heart of this ROM
MaxRabbit, Elisha, FroggyStyle, surfed for hosting
shoman94 for modem expertise, themes porting and forum support
DAGr8 for lockscreen sources adapted for I9000
xcaliburinhand for building the original reoriented kernel
untermensch, Sbrissen, dhiru1602, Rimmer1966 for the 5 lockscreen and extended power menu sources and tweaks
connexion2005 for the video walk through
MikeMike01 for the haptic feedback
verysafety for the bootanimation
sailerboy for oferring a BNC for IRC channel
for.digit for the keyboard
Lukiqq for the volume tones mod
Maybe others which I gorgot...
Thanks everyone for donations! You + plus my addiction keep this project alive.
Changelog and downloads - these pachages are to be flashed with CWM3 ONLY!
6/8/2011 - v 5.6 - Download links and changelog here
5/20/2011 - v5.5 - Download | Mirror | Mirror md5: 7C92599BC72F621C488205C3D8650405
* FLASH ONLY FROM ClockworkMod 3!!! (orange recovery) *
If you flash from VWM2 your applications will be deleted on reboot.
---------------------------------------------------------------------------------------------------------------
in case you have CWM2 (green text usually), not to be forced to flash Talon kernel via ODIN, you may flash the ROM in this order:
- from CWM2, flash the ROM
- after installation, go to advanced - reboot in recovery (or pull out the battery and reboot in recovery using the keys combo)
- now you should have CWM3, install the ROM again and reboot
---------------------------------------------------------------------------------------------------------------
* wipe release (new base) *
* no need to disable lagfix (disable lagfix=convert to rfs)*
* if you're running a gingerbread ROM, you do not need to update bootloaders! (because you have them already...)*
* if you're caught in a boot loop, reboot in recovery and just install the rom again *
* JVB kernels are not compatible with JVO (JVH kernels yes) *
* JVB themes are not compatible with JVO (JVH themes.. maybe) *
Started from scratch with XXJVO base
Unthemed! Themed version will be up soon.
Removed TW4 (as it removes the speed of Gingerbread)
Added tweaked TW3 with lanscape support.
Removed MTM GB KB, replaced with Perfect KB - thanks to for.digit
Fixed issue when Voodoo Control app would not be visible in the Market.
Added 3 packs in Continuum_content folder on sdcard containing:
- option to disable beam animation
- option to disable overscrool glow in favor of overscrool bounce effect
- pack with all SGS blootware.
Added new wallpapers to ContinuumWallpapers app
Fixed Gingerbread Launcher wallpaper setting issue
Fixed buttons layout on endcall screen
Fixed orientation issue in phone, now it obeys the orientation settings.
Added separate tone for each volume level while pushing the vol buttons - thanks to Lukiqq
Maybe some other which I forgot.. Ill add them here if I remember5/9/2011 - v5.4.1 - Download | Mirror | Mirror md5: 3324CB60855BE2D6954D0D1D253E2F9E
* non wipe release *
* if you come from an earlier release - earlier than v5.4 - or different ROM, perform a factory reset from recovery *
* no need to disable lagfix *
* if you're running a gingerbread ROM, you do not need to update bootloaders! (because you have them already...)*
* if you're caught in a boot loop, reboot in recovery and just install the rom again *
* JVB kernels are not compatible with JVH *
* JVB themes are not compatible with JVH *
Added Talon kernel 0.1.7 Test 10 (all issues should be solved now)
Added Moded Gingerbread launcher - Landscape and Drop to uninstall capabilities
Added MTM Gingerbread Keyboard5/9/2011 - v5.4 - Download | Mirror | Mirror - md5: 062EB993AB7EB761FCEAEA5DDB254D8F
* wipe release, however, perform a factory reset from recovery just to be sure *
* flash over anything *
* no need to disable lagfix *
* if you're running a gingerbread ROM, you do not need to update bootloaders! (because you have them already...)*
* if you're caught in a boot loop, reboot in recovery and just install the rom again *
* JVB kernels are not compatible with JVH *
* If you have troubles take a look here *
Started from scratch with JVH as a base
Exclusive Talon 0.1.7 kernel for JVH from eXistZ with OC cap. up to 1.5GHz (No OC/UV by default, after startup set it from Voltage Control app)
Multiple tweaks available in Tweaks app.
All lags should be gone on this release (for me is lightning fast)
Camera has option to enable/disable GPS tag5/6/2011 - v5.3 - Download | Mirror md5: 1E05275EFF20371295612F9D80590ADA
* non-wipe release , however, emails and email account will be wiped *
* davik cache is wiped, initial boot will take a while *
* flash over v5.2. If you come from an earlier release, it is recommended that you perform a factory reset *
* no need to disable lagfix *
* preferably flash with power cable unplugged *
* if you're running a gingerbread ROM, you do not need to update bootloaders! (because you have them already...)*
* if you're caught in a boot loop, reboot in recovery and just install the rom again *
Replaced Email app with Email from Continuum4 (2.2.1)
Removed Email widget, SevenEngine (needed to run Email from SGS2) and Digital clock (cute but stupid)
-----------------these changes removed the lag, mainly removing SevenEngine.apk and Email.apk--------------------
Added FuguTweaks v0.2
Added Mod Version and Full kernel name and build date to Settings - About Phone
Added "link voice call volume with notification volume" option in Settings - Sounds - Volume 5/4/2011 - v5.2 - Download | Mirror | Mirror md5: EC36AC5A95E0E7D30CE4228403D4C58A
* non-wipe release * it seems that it wipes the text messages though, please backup those *
* only davik cache is wiped, initial boot will take a while *
* flash over v5.1. If you come from an earlier release, it is recommended that you perform a factory reset *
* no need to disable lagfix *
* preferably flash with power cable unplugged *
* if you're running a gingerbread ROM, you do not need to update bootloaders! (because you have them already...)*
* if you're caught in a boot loop, reboot in recovery and just install the rom again *
Fixed media playback issues (disabled stagefright, if wanted you can enable it from Tweaks app)
No UV and no OC (you can tweak those from Voltage Control app)
Removed several TouchWiz 4 widgets causing insane lag
Added several FlipFont packages (thanks to pauldiddy)
Thinking of removing TouchWiz 4 in next release... If is too laggy for you, use the alternative launchers.5/3/2011 - v5.1 - Download | Mirror | Mirror md5 hash: 57AFB2392A821E3634A8FD00D4733BFC
* flash over previous releases *
* no need to disable lagfix *
* wipe release, backup your apps *
* preferably flash with power cable unplugged *
* if you are already in a gingerbread ROM, you do not need to update bootloaders! (because you have them already...)*
* you do not need to go back to stock, the rom performs a full wipe (except sdcard) during installation *
* if you're caught in a boot loop, reboot in recovery and install the rom again *
Fixed Puzzle lockscreen layout
Fixed Glass lockscreen layout when displaying notifications
Fixed 3D rendering issues
Fixed Keep The Lights On control on soft buttons backlight
Added Haptic feedback (Thanks MikeMike01)
Removed Video call references from everywhere (thanks to Crysis21)(if you find any left, let me know)
Added stock TW4 launcher
Added Email app from SGS 2
Added Google Talk with video and voice capabilities (could not test them, please report if it works)
Almost all system apps gingerbread themed.
Added a bunch of SGS 2 widgets !One widget called "Month" will crash TW! Do not use it!
Changed Rotary lockscreen jog image (thanks CyanogenMod)
Added Continuum Wallpapers APP, more than 20 custom wallpapers including ones found in previos versions of Continuum
Increased ligheness of menu icons for better view
Swype and Samsung KBs from SGS 2 (tons of languages!!!)
Auto rotation/brightness and wifi disabled by default.
Replaced Thinkoffice with QuickOffice (default on Captivate)
Added ro and rw commands for easy mounting of /system read/write and read-only.
Added terminal for making it easier to run these commands (make sure you type su first to get root rights)
Updated kernel to Talon 0.1.5.
Added new boot animation (green as gingerbread's icons )
Forgot to add lots of fonts... will do in next release
Apps in /data/app - which will be removed if you perform a factory reset
Code:
Arclauncher
AstroFM (for enabling browser downloads)
Google CarDock app
CPU spy
Voltage Control
Maps
Youtube
DeskHome
Google GenieWidget
HeLauncher
Daily Briefing
Keep The Lights ON
QuickOffice
SGS2 live wallpapers
TiBU
28/4/2011 - v5 RC3 - Download
* assuming that you have already new bootloaders, flash from recovery ONLY AFTER you flashed latest Talon kernel via ODIN - this is a must: latest kernel via ODIN! make sure you perform a hash check first to avoid surprises *
The reason is because ODIN flashed both blm7 and 8 (unlike zips found on xda which only flash bml7) which makes the system more stable
This is how I do it and this is how my rom installs it's kernel, is your choice if you want to flash over without flashing the kernel via ODIN, but dont be sad when I'll say "I told you so"
* this is a wipe release, make sure you backup your apps *
* you may flash this over ext4 partitions (you dont need to disable lagfix) *
Fixed Bluetooth bug
Fixed About phone crashing when using other keyboard than stock
Fixed battery charge issue (maybe..). If not fixed, try the Flight mode for 15-30 sec while charging.
Clock is set to 1GHz and UV of -50mA on all steps.
Added Lanscape Dialer and Phone
Removed ascending ringtone
Removed GPS tagging in Camera (don't ask me to put it back, is a direct attack on privacy not having an option to disable/enable it)
Implemented TouchWiz 4 launcher
Added Gingerbread keyboard back
Added Samsung Keyboard and Swype from JVK (especially for Spanish support)
Added moded ArcLauncher
Replaced gingerbread launcher with HeLauncher
Upgraded to latest Talon kernel (1.1.3) - not available on original thread yet
KTLO is now working.
Auto brightness disabled - saves battery
Moved several apps from /system/app to /data/app
Added secret live wallpapers back
Added Voltage Control and CPU spy
4/27/2011 - v5 RC2
* flash from recovery ONLY AFTER you flashed once the initial package WITH bootloaders (no need to flash it again if you did already, basically you can flash this if you already have gingerbread bootloaders)*
* this is a wipe release, make sure you backup your apps *
* for those that run a kernel that allowed them to activate lagfix, disable it before flashing *
Who has problems with Bluetooth or various inexplicable problems, power off your device and turn it on again.
Switched to eXistZ's kernel: Talon
Fixed one AOSP lockscreen issue that generated soft reboot.
Fixed rotary lockscreen - the silent button first checks for vibration setting and puts the phone in silent with vibration (if enabled) accordingly.
Changed system font to Galaxy S II font
Added SIP configuration in Call Settings
Fixed multitouch - thanks cgnadt for the tip
Several visual changes4/23/2011 - v5 BETA3 - non wipe
* flash from recovery ONLY AFTER you flashed once the initial package WITH bootloaders (no need to flash it again if you did already, basically you can flash this if you already have gingerbread bootloaders)*
* if you have force closes on About Phone in Settings, flash the package without bootloaders with ODIN and then C5beta3 from clockworkmod recovery - your data will be kept *
Fixed more visual bugs
Updated the kernel to vG.1.0
Added Gingerbread keyboard
Set Auto Rotation ON by default.4/23/2011 - v5 BETA2 - non wipe
- flash from recovery ONLY AFTER you flashed the initial package WITH bootloaders -
Fixed several visual issues
Added black google search widget
Added black power control widget (reboot if the buttons dont appear)
Added Dock settings in Settings.apk
Changed modem to I9000TDVJP9 - thanks shoman94 for the tests and suggestion
Removed FMRadio app
Added bash shell
Moved su and busybox binaries from /system/xbin to /system/bin
Modem and kernel flash is working.4/21/2011 - v5 BETA1.
Based on I9000XWJVB, gingerbread 2.3.3
Extended power menu
5 lockscreens. Wallpaper can be set on all of them.
MMS/SMS removed from logs
Hacked camera: taking pictures/videos with power button and on low battery. Dont touch the FFC button!
Phone without ascending ringtone.
Killed battery full notification.
Browser with user agent settings and tab limit increased to 8.
Removed several useless fields in Settings.
Added back keep the screen on in Development settings.
Wifi scan interval increased to 30 sec.
Updates system apps.
Rooted, zipaligned, deodexed.Known issues:
Battery drain after charging hits 100% - affecting all GB based ROMs, not only Continuum. Investigating the cause.
For other battery drain issues check this: http://forum.xda-developers.com/showthread.php?t=1039696
The display goes dark when making first phone call after reboot. You can get it back on by swyping your finger in front of the proximity sensor or put it at your ear and take it off.
Buttons dont turn ON on screen touch
Reserved___
reserved__
And so it begins....
Sent from my SAMSUNG-SGH-I897 using XDA App
We're not worthy!
and it beings
what the fudge!!!! time to flash me some gingerbread goodness =D
How convenient. The phone is already flashed to stock/cleared and is sitting here with a full battery.
Downloading now.....(NM, I'll hang out for the w/bootloader version)
yep i just came...
seems like a race to the wonderland
it seems like forever for it to upload haha
Sh*t just got real.
EDIT:
Screenshots ?
I already have a JVB rom, and the new bootloader, will the without bootloader package work, or I still need to flash your bootloader one ?
singalkalpesh said:
Screenshots ?
I already have a JVB rom, and the new bootloader, will the without bootloader package work, or I still need to flash your bootloader one ?
Click to expand...
Click to collapse
You only have to flash the new bootloader once.
Impatiently waiting for the download link.
So this is just the stock ROM or has anything (besides kernel and key mappings) been changed? Does it need to be rooted or has it been rooted already and comes with su and the superuser app? If it needs to be rooted, will the rageagainsthecage work?
Thanks!
harpo1 said:
You only have to flash the new bootloader once.
Click to expand...
Click to collapse
That I got, I've flashed couple of ROMs from I9000 thread, I was just making sure that the only thing missing from "without bootloader" is bootloader, as he says the recovery might not work too.
singalkalpesh said:
That I got, I've flashed couple of ROMs from I9000 thread, I was just making sure that the only thing missing from "without bootloader" is bootloader, as he says the recovery might not work too.
Click to expand...
Click to collapse
Some who haven't flashed with bootloader were experiencing recovery and other minor problems.
Say what?! just got v4 on my phone
time to move on anyways
Ok I am signing up for feedback from CM7 users testing this one.
Integrated Europe Peng browser software, want to support me, the running time does not take much traffic!
The new UI interface, new features, speed than the CM7, MIUI
Whether it is sound, picture, frame, power, performance, speed, stability, camera, WIFI, the GPS and so have done a perfect optimization
Models: U8800 + / U8800pro
Android version the: MoKee the OS
Source: of CyanogenMod-7.2
Version Revised by: Sakura suza
Revision: March 09, 2012 0
Thanks: Ry09iu & Geno in MoKee OS & Guo (in alphabetical order)
[ ROM updates:
Brief, this version has been fixed sonic boom break the sound, to accelerate the speed of operation, optimizing 2G, 3G, WIFI connection, built-in browser of European friends (I hope to run once and then delete),
part of the software has been streamlined out to join without the calendar of Google services
Disadvantages: This version can not be overclocked
without FC
[Install ROM] :
Please take a look at their phones settings - whether on the phone -Android version " 2.3.5 or above
If it is 2.2 Please brush into V100R001C00B512G001 (Android 2.3 official original Universal Edition )
The downloaded zip Brush package do not extract directly into the SDcard or built-in card
. has been completely shut down press and hold the volume + power button to turn on , do not release until well into the recovery mode
. recovery volume up and down keys / Menu and Home keys move up and down the power button / search confirmed that the back key to return to the previous menu level.
Select "Clear all data"
Select the "Clear cached data"
Shuangqing select "Advanced Features" - "to reboot into" recovery mode "
Select "from the SD card, select the Brush package"
. re-election to select the ZIP file from the SD card " or " select from the built-in card ZIP File " (mainly to see the ROM package is placed where)
9. just download the zip brush machine to find the package to confirm
10. confirmed, brush, wait about one minute to complete the
11 . brushing to return menu, select "reboot the system immediately and restart the phone
12. and then patiently wait for a while, the first start will be slow.
Download: http://www.mediafire.com/?z7w1gs4sjcr64a4
Running sub-Show Time (screenshot above version)
is not overclocked: 3200 +,
overclocked to 1.4:3900 + points
[For U8800 + updated introduction] This version is the complete package ... need Shuangqing brush into!
* Increased power management
* Fixed some minor problems on the version of
* optimization
* Modify the search key lock screen
on the U8 + fluency * Other updates see above * LEZO join X5 convenient overclocking putting break the sound is perfect repair (from the G major) BOOT permission to crack zipalign optimization script FPS unlock FPS modify the script for the 55 stable transplant to accelerate the running speed of operation to optimize power absolute Province, built-in Jiaru Ou Peng browser built-in sogou input method to improve the quality of photographic and video increase the long-press the power button to pop-up menu to adjust WIFI power to strengthen the WIFI stable 3G user-specific optimization of the script, 3G, 2G are the same to the force to retain all of the services of google (not google, not the Android system) comes with the calendar does not need to visit the google services (also with the festival) other settings LEZO official to set the built-in the Europe Peng browser: Europe Peng browser - free software, please support, do not brush into the first rush to delete, click on the installation once, so for me is also a support, or statistical the Brush amount for this version! [ROM is installed] the end of package: Please use the official or other card brush package as the end of Brush Pack 1 downloaded zip Brush package do not extract directly into the SDcard on
hold the volume up + power button boot, do not release until into recovery mode
. recovery, volume up and down keys / menu, the Home key to move up and down the power button / search button to confirm the return key to return to previous menu.
(4) Select "Clear all data" restore factory
5. select from the SD card, select the Brush package "
re-election to select the ZIP file "
7 "from the SD card to find just download the zip Brush package to confirm
8. confirmed, Brush, wait about one minute to complete.
After brushing, back to the first menu, select "reboot the system immediately and restart the phone
10. and then patiently wait for a while, for the first time you start slow.
Specify: Please double clear, reboot into recovery mode and then a double clear, and finally painted into. (Brush ROM package, please use the G major of Chinese recovery)
Download : http://dl.dbank.com/c0kopvhkv7
Languaje
which languaje?
seryioo said:
which languaje?
Click to expand...
Click to collapse
English - chinese!
pikachukaki its nice that u copy paste from Chinese site and all.. but Most of us can go to Chinese page with Google translate and BRUSH that package
anyway plz dont just copy paste from google translate... try to BRUSH things up...
wtf BRUSH means?
Zaic said:
pikachukaki its nice that u copy paste from Chinese site and all.. but Most of us can go to Chinese page with Google translate and BRUSH that package
anyway plz dont just copy paste from google translate... try to BRUSH things up...
wtf BRUSH means?
Click to expand...
Click to collapse
brush zip = install zip..he means to install the zip from sdcard at cwm!you can get the picture of what this rom is all about..you can test it and if you like stick with it...noone else doing roms here..so we have to use something..if you don't like it stick with froyo!!
ROM content1,
using the latest development version of MIUI transplantation, change of models for the HTC, modify the boot animation for Huawei original. Perfection does not broken sound2, by default Zram, default unlock FPS, enhanced.conf can close3, all normal, repair screenshot. Radio2.3.7 have no. This version has reached the state of perfectionIn 4, joined the RE manager white base Black Edition, the latest version of the electronic market,4 Music, goggles, Huawei file manager, animation, replacement of the input method Sogou acceleration. Replace the calendar is the calendar, the function is more powerful5, integrated titanium backup and MIUI control center, time center can be custom status bar6, to modify the boot theme from the fabrication of V4join4starter perfect imitation of ice4.0Optimization and energy saving mechanism of camera. Smooth interface7, add special effects, such as feeling slowly please use other settings, modify the animation speed8, modify the system wallpaper, sounds, music and other more personal calls9, since the launch of the boot EQ manager, automatically adjust the music sound. Listen to music effect greatly optimize.Update* FPS unlock -55* optimize script* kernel - G - perfect not broken sound* streamline retained Google services* built-in screenshot function normal ( to save the image directory to the / sdcard / MIUI / screen_cap directory)* optimize script on WIFI range, power adjustment* optimization scripts on GPS regulation* optimize script on optimal energy slightly to save electricity* optimize script to improve operation speed* optimization scripts on 3D processing run808* RE Update Manager ( white, enable compatibility after normal )* updated with theme* built-in security intelligence ( ROM statistical software market competition, run time, official statistics! )* UC browser ( ROM competition partners )Key questions:1 integrated software ( titanium backup ) Silva part we can love, do not want to use the RE management into syetem / APP find the corresponding software icon, press, and then delete it.Need to complete2Google services please download Google service pack into the brush, to use complete Google servicesOn the change of the bell3, replacing memory card system settings in tones into default, this is the official MIUI bug, please use the theme style - > modify local styles - > replace the ringing tone - > by other program to replace the - > music player to replace, can also be used to replace third of music player.--------------------------------------------------------------------------------Install ROM:1 will be downloaded from the zip package do not extract, directly into SDcard2has been holding down the volume up + power power button, do not loosen, until entering the recovery modeIn 3 recovery, the volume down key / menu, the home key to move up and down, power key / search keys for the confirmation, the return key to return to the previous menu.4 select" clear all data" to recover the factory5 select" option package from the SD card"6" from the SD card can choose a ZIP file"7to find just download the zip package confirmation8after the confirmation, brush machine, wait 1minutes, complete.9after brushing, returns the first menu, select " to immediately restart restart mobile phone system."10and then wait for a while, first boot will be slower.Brush the ROM package using G large Chinese recoveryAddressThis post hidden contentHttp: / / 115.com / file / dpq975v4#Anzhi-2012-04-042.zip
Thread Closed
A large block of text, with no development. This is not the section to post this!
CM11.0 for Canadian Samsung Galaxy S2 HD LTE (SGH-I757M)
Code:
[COLOR="red"][B][SIZE="4"]*** Disclamer ***[/SIZE][/B]
THIS ROM IS FOR THE CANADIAN SGH-I757M ONLY... DO NOT FLASH IT ON ANOTHER DEVICE!
By flashing this ROM, you are voiding your phones warranty (Unless you return it
to complete stock which is possible, but beyond the scope of this thread). You
also agree that I will in no way be held responsible in the event that your
device becomes bricked (Not likely to happen). In addition, you are responsible
to take the necessary backups of your apps, data, sms, contacts, calendar events, etc.
If you agree, then please continue on ;)[/COLOR]
Code:
[COLOR="red"][B][SIZE="4"]*** NEW RECOVERY REQUIRED ***[/SIZE][/B]
Due to the addition of user control in CM10.1/CM10.2/CM11.0, you are required to update
your recovery to a supported recovery with a version greater than 6.0.39. As of this writing, the latest available
version is Philz Touch Recovery 6.57.9 (based on CWM 6.0.51) for the SGH-I757M. There is currently not a
version of regular CWM for this device that will flash Kit Kat ROMs.
If you flash the new ROM with the old incompatible recovery, you risk loosing
your sdcard under a bunch of subfolders.[/COLOR]
Code:
[COLOR="red"][B][SIZE="4"]*** NEW RADIO FIRMWARE REQUIRED ***[/SIZE][/B]
As of CM10.1, ICS radios (I757MUGLH2) are no longer supported. You must download the new JB radios (I757MUGMC5).[/COLOR]
Introduction
It's finally here :-D CM11.0 (Android4.4.x) for the Bell Canada Samsung Galaxy S2 HD LTE (SGH-I757M). There is a lot to be said about Kit Kat with it's clean white icons and new launcher. The focus with Kit Kat was to make the device use less RAM and imrove performance, and so far it's running great.
Click to expand...
Click to collapse
Images
SEE SCREENSHOTS TAB AT THE TOP OF THIS PAGE.
Click to expand...
Click to collapse
What Works
* Phone
* Wi-Fi
* Mobile
* GPS
* Bluetooth
* SMS/MMS
* Data Usage
* Camera (Camcorder doesn't work on 1080, swith it to 720 for recording)
* BLN Notification (Enabled in Advanced Device Settings)
* VM Notification
* Youtube Overlays
* init.d is fully supported
* USB Mass Storage (UMS)/MTP
Click to expand...
Click to collapse
What Doesn't Work
* I experienced an incompatibility with some of my existing mp4 media files and when gallery tries to load them they cause a soft reboot. Loading these videos into the gallery media player using a 3rd party file manager seems to work without issue, it is the loading of the preview in gallery that causes the phone to crash.
Solution: The solution is to use a file manager to move the mp4 files to a new directory and add a ".nomedia" file to that directory so that when browsing photos in the gallery, it does not try to load the offending mp4 files.
Click to expand...
Click to collapse
Pre-Installation instructions
1) Download to your sdcard, the new Philz Touch Recovery 6.57.9 flashable zip which is compatible with CM10.1/CM10.2/CM11.0
2) Enter your existing CWM Recovery
3) Install Zip From sdcard
4) Select the philz_touch_6.12.8-celoxhd.zip that you downloaded to your sdcard
5) Flash the new Recovery
6) Go back to the main recovery menu and go Advanced -> Reboot Recovery (This might not actually reboot you into recovery, you may have to do that manually by turning off phone and using 3-button combo)
Click to expand...
Click to collapse
Now that you have the new recovery flashed to your device, you can continue to install this ROM.
Please be aware that the new recovery detects your sdcards (internal/external) in a different way. Your internal sdcard is recognized as /storage/sdcard0 and your external sdcard is recognized as /storage/sdcard1.
Installation instructions
1) Download the Rom and Gapps (Use only the Gapps downloded from this thread. It is customized due to our small cache partition)
2) Enter CWM
3) TAKE A NANDROID BACKUP
4) Wipe Data/Factory Reset
5) Format Cache
6) Advanced -> Format Dalvik Cache
7) Mounts and Storage -> Format /data,/cache and /system (Required for a clean flash)
8) Flash the Radios (Required before you flash the ROM, unless you already have the new JB radios flashed)
9) Flash the ROM
10) Flash the Gapps
11) Reboot Phone
Click to expand...
Click to collapse
NOTE: Using Philz Touch Recovery, you can replace steps 5 - 7 by selecting the "Clean to install a new ROM" option.
Download
ROM Downloads
Build: 20141122 (Latest)
ROM: cm-11-20141122-UNOFFICIAL-celoxhd.zip (213.2MB)
PA Mini GAPPS: PA Mini Modular GAPPS
JB Radios: JB_modem_I757MUGMC5-flash_this_in_CWM.zip (21.3MB)
NOTE: A clean flash is REQUIRED if upgrading from a previous version of android such as CM10.2
Build: 20140910
ROM: cm-11-20140910-UNOFFICIAL-celoxhd.zip (211.3MB)
PA Mini GAPPS: PA Mini Modular GAPPS
JB Radios: JB_modem_I757MUGMC5-flash_this_in_CWM.zip (21.3MB)
DADOES ROM:
Build: 20140424
ROM: cm-11-20140424-DADOES-UNOFFICIAL-celoxhd.zip (469.18MB)
GAPPS: INCLUDED
JB Radios: JB_modem_I757MUGMC5-flash_this_in_CWM.zip (21.3MB)
Recovery Downloads
*** REQUIRED *** Philz Touch Recovery 6.12.8 (CWM 6.0.4.7) compatible with CM10.1/CM10.2/CM11.0
[celoxhd][SGH-I757M][CWM Advanced Edition] PhilZ Touch
* I no longer upload files to XDA because it takes way to long to manage, so I only use androidfilehost.com. All files can be found under my profile: https://www.androidfilehost.com/?w=files&flid=7547
Click to expand...
Click to collapse
Tips and Tricks
Checkout the second post for some tips and tricks on setting up the ROM.
Click to expand...
Click to collapse
Changelog
Code:
[B]November 22, 2014 - Build 20141122[/B]
* Increased kernel version to Titanium 1.1.1
* Added cpu input boost framework - credit: sultanxda
* Added cpu OC (The scale goes up to 1890MHz, but you should only put it as high as 1836MHz since I was getting random reboots with 1890MHz. 1674MHz is the default OC and 1512MHz is the default CM OC) - credit: TeamFahQ/sultanxda/titanic-fanatic
* Added low power flash mode which will use a low powered flash when the battery is equal to or below 35%. This should help with the camera causing the phone to shut down when trying to take pictures using the flash. This threshold may need to be tweaked, so please let me know if you still experience shut downs related to using the camera. - credit: sultanxda
* Added sgs2hdbell as a device name to the updater-script to allow all bell i757m devices to flash the ROM without the need to edit the updater-script.
* Added panel undervolt interface. - credit: sultanxda
* More memory optimizations. Some of the extra RAM that the previous optimization gave us has been allocated to other things such as the surface flinger. Available RAM is now around ~760MB.
* Removed vbus_present wakelock for good (it worked it's way back in somehow)
* Added fast charge. Phone will now charge at 1200mA until 95% regardless of your charging source (AC/USB)
* Added exFAT driver to kernel. It's a filesystem like ext4 but is based on Windows FAT filesystem. You can format your sdcard as exFAT as it's supposed to be faster than vFAT which is what our sdcards are formatted as. Make sure you backup your sdcard contents before formatting it as exFAT and keep the backup until your sure you want to stick with exFAT.
* Removed NFC since I don't think anyone uses it and can't figure out how to have it disabled by default so it is removed completely. If someone is using NFC, let me know and I'll add it back but for now, I just see it as a battery drain.
[B]September 10, 2014 - Build 20140910[/B]
* Kernel now has a custom version number in addition to my kernel name of Titanium
* Optimized kernel memory mapping to increase our physical RAM from ~730MB to ~800MB (a whole 70 extra MB... whoa!)- credit: sultanxda
* Removed mDNIe (it's not supported/working)
* Removed 91fixoverlays script (no longer needed)
* Removed persist.hwc.mdpcomp.enabled from build.prop (hack to fix the hwoverlays because fb drivers are broken somehow) - credit: sultanxda
* Added GPU overclock from 266MHz to 320MHz (helps a lot with the UI lag) - credit: sultanxda
* Added code for 2 phase OnDemand governor - credit: sultanxda
* Added opensource frandom module to help speed up the UI (also helps with the lag) - credit: bryan2894
* Added mdp Color Enhancements (better display color) - credit: sultanxda
* Added color/gamma controls in place of mDNIe (see the tips and tricks section for my already tweaked favorite settings) - credit: bryan2894/titanic_fanatic (I had to integrate it into our display drivers)
* Added Swipe 2 Wake (S2W) support in the kernel (it's actually tap once on each key from left to right). - credit: bryan2894
* Added audio.r_submix.default.so to the build to enable screencasting - credit: [URL="http://forum.xda-developers.com/hardware-hacking/chromecast/experimental-enable-mirroring-device-t2812193"]THIS POST[/URL]
* Added the necessary audio channels in the audio_policy.conf for screencasting - credit: [URL="http://forum.xda-developers.com/hardware-hacking/chromecast/experimental-enable-mirroring-device-t2812193"]THIS POST[/URL]
* Added the necessary settings in Advanced Device Settings for screencasting and color/gamma control - credit: bryan2894/titanic_fanatic (I added the screencasting settings)
* Fixed the annoying BLN sticking (I think... Please confirm this for me) - credit: bryan2894
* Fixed the sampling rates for A2DP, input and r_submix channels - credit: bryan2894
* Changed both scaling governors to OnDemand - credit: bryan2894
[B]August 15, 2014 - Build 20140815[/B]
* Sync with sources
* Added sysfs interfaces for vibrator intensity
* Added Settings in Advanced Device Settings for vibrator intensity
[B]July 11, 2014 - Build 20140708[/B]
* Sync with sources (Update to Android 4.4.4)
* Vibrator module now built into kernel
* Added sysfs for vibrator intensity to allow user control of the vibrator intensity
[B]May 21, 2014 - Build 20140321[/B]
* Sync with sources
* Switched to using media-caf
* Updated kernel with sources for media-caf
* Fixed issue with Google Camera resolution preferences FC
* Added back 91fixoverlays script due to graphics glitches with the new kernel
[B]April 10, 2014 - Build 20140410[/B]
* Synced with sources
* Added USB Mass Storage Mode (UMS)
* Fixed network type selection menu. It now includes LTE as an option.
[B]March 29, 2014 - Build 20140329[/B]
* Synced with sources
* Added overlay items to enable homescreen/lockscreen rotation
* Set Camera as default Scene Mode to partially fix camcorder recording
* cherry-pick display-caf commits to fix some of the graphical glitches
[B]March 21, 2014 - Build 20140321[/B]
* Sync with sources
* Remove 91fixoverlays script
[B]February 6, 2014 - Build 20140206[/B]
* Initial release
Click to expand...
Click to collapse
FAQ
Q. How do I install SuperSu?
A. Install the latest version from the market. Then open SuperSU and when it asks you to update the superuser binary, answer yes and make sure you select the "TWRP/CWM" method. This will reboot your phone into receovery where the superuser binary will be updated and the su daemon script added. Reboot your phone and you should be rooted.
If your having difficulties getting SuperSu installed, try downloading the flashable zip and manually flashing it to your phone.
UPDATE-SuperSU-v1.65.zip
* Thanks to @formercontra for this tip *
* Make sure this is the way in which you want to manage superuser permissions as I have not yet found a way to revert to the integrated superuser without having to re-flash the rom
Q. How do I access Developer Options?
A. Go to Settings -> About Phone and scroll to the bottom. Press the Build number 7 times to activate the Developer Options.
Q. I was browsing my pictures/videos in the gallery and my phone rebooted?
A. This seems to be caused by the gallery trying to generate a preview from the first frame of an mp4 created on older versions. Simply move the mp4's to a different directory with a file manager and add a ".nomedia" file to the folder to stop the gallery from trying to scan them. To open them, open with a filemanager and then select the gallery media player and it will play without issue.
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* CyanogenMod Team - ROM Base
Without all of the hard work and efforts of the CyanogenMod team, this ROM would not be possible, so we owe them our thanks for providing us with such excellent ROMs.
In addition, I have received a lot of help on my journey to understand and be able to develop for the android platform, so I owe the following people my thanks for helping me to make this ROM possible.
* [user=673068]@dsixda[/user] - Initial port of CM9/CM10 for SGH-I757M
* [user=4974935]@Strange Peer[/user] - Continued development of CM10
* [user=3478918]@rukusx7[/user] - Contributor
* [user=4435341]@bijon440[/user] - Contributor
* [user=4036181]@kj2112[/user] - Contributor
* [user=5077807]@Tronith[/user] - Contributor
* [user=3651088]@Zippy Dufus[/user] - Contributor
* @Socim - Thanks to Socim for pointing me in the right direction a few times ;-)
* @formercontra - Contributor
* @Sultanxda - Many bug fixes and improvements for the msm8660 kernel
Thanks guys you've all been so awesome to work with ;)
One last group of people to thank. It's YOU! Without all of you guys and girls who come to download our creations, there would be no reward for doing this. Thank you for downloading, providing feedback and being part of this small family. You are all appreciated ;)
XDA:DevDB Information
UNOFFICIAL CM11.0 For Bell SGH-I757M, ROM for the Samsung Galaxy S II
Contributors
titanic_fanatic
Source Code: https://github.com/titanic-fanatic
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: SGH-I757M
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2014-02-06
Last Updated 2014-11-24
Tips & Tricks
Tips and Tricks
Here are my settings for the color/gamma controls!
Color:
Red -> 60%
Green -> 45%
Blue -> 45%
Gamma:
Red -> 0
Green -> -5
Blue -> 5
Why does the color/gamma controls get set to a value other than what I've set?
This is something I have not yet resolved, but I have noticed that it seems to jump up by 5. So if you want 50% for example, try setting it to 45%.
Logcat what is it and how do I get one?
A logcat is the system log of events that occur on your device. This log provides the developers with some useful information pertaining to crashes and other bugs you may encounter while using the ROM and/or apps running on the ROM. Getting a logcat is generally a very simple thing. Just open your terminal emulator on your phone and type the following commands without typing the $ as it denotes a command on the command line:
$ su
$ logcat -v long > /sdcard/logcat.txt
Click to expand...
Click to collapse
The first command above will ask you to grant superuser permission to the terminal emulator which you must accept. The second command will create a file at the root of your sdcard called logcat.txt and then start writing the logs to this file. Since the logcat is a continuous function, your terminal emulator will not return you to the command prompt after the second command as it will continue to write logs until you stop it by pressing the x to close the emulator.
If you are experiencing an issue with an app, then you need to do the steps above to get the logcat recording, then press your home button so that you don't close the emulator, but put it in the background. Then you do the action that causes the bug to occur and then open the emulator and terminate it to stop the log from writing. this ensures that the error is located somewhere around the end of the log and makes it easier for us to spot
How do I take a dmesg (kernel log)?
It's fairly simple, open up your terminal then type the following:
$ su
$ dmesg > /storage/sdcard0/dmesg.txt
Click to expand...
Click to collapse
This will save the log to the root of your sdcard as dmesg.txt. Just post that or send it to [email protected] if it's to large to post here
What is dalvik-cache and why do I need it?
To explain dalvik cache, you must understand how an app is pieced together. An apk (android app) is like a zip file and contains a bunch of files inside. Two important files to note are the resources.arsc and the classes.dex files. They are compiled versions of the resources (images, sounds, xml files) and classes (source code files) of the app. When android boots into a ROM for the first time, and everytime you install an app, the system performs an optimization called dex optimization which means that is pulls the dex file out of the app and places it into what is called your dalvik cache. The system can then pre-load these dex files and allow the app to start quickly.
Dalvik cache is stored in two locations, at /data/dalvik-cache for user apps and at /cache/dalvik-cache for system apps. We unfortunately have a very small partition for /cache, only 100MB and this sometimes causes a side effect on first boot where it fills up to much with apps that only ever run on the first boot to setup the system and then other dex files cannot be written to the /cache partition which causes them to Force Close (FC). The trick in this situation, is to bear through the FC messages to get the system to the home screen, then reboot into recovery and Wipe Dalvik Cache from the Advanced sub-menu. This will delete all the dex files in both locations I mentioned above and will force the system to regenerate them upon reboot, and this time, those 1-time running apps don't start up and don't end up being optimized which allows the necessary dex files to be created for the apps that were FC'ing.
I have moved what I could from the system partition to the data partition to spare some extra space on /cache but this still sometimes happens, especially as the ROM's get slightly bigger every new major version.
Flashing Recovery for the First Time
Flashing CWM for the First Time
This is a pretty simple step once you get past the install recovery script which I'll explain how to accomplish. Make sure you follow the instructions closely because Odin, the program the we use to bypass the security, can do some serious damage to your phone if your not careful.
1) Download the latest CWM tar.md5 to your computer from my androidfilehost.com repo here:
http://www.androidfilehost.com/user/?w=settings-dev-files&flid=12461
2) Download Odin 1.8.5 zip and extract all the files to a folder on your computer (i use my desktop):
http://www.androidfilehost.com/?fid=23501681358544719
3) The drivers are very touchy on windows computers, so I recommend that you install Samsung Kies which will ensure that the drivers are installed and setup correctly. You can download kies from here:
http://www.samsung.com/ca/support/usefulsoftware/KIES/JSP
4) Be careful now that you have kies installed, it does not play nicely with Odin, so whenever you use Odin, you should ensure that kies is completely closed and not open in the system tray by opening your Task Manager and "End Task" to any kies process such as "Kies.exe" and "KiesTrayAgent.exe"
5) Now, with kies closed, open Odin and do not change any settings. It should look like this:
6) Now click on the Bootloader button and search for the CWM tar.md5 you downloaded from my androidfilehost.
7) Now turn off your phone, and when it's powered off, press and hold the volume down and power buttons at the same time until you see the warning message about Download mode. Press volume up to enter download mode.
8) With Kies closed on your computer and Odin open cwm tar.md5 loaded into the bootloader section and your phone in Download mode, plug your phone into the computer with your micro usb cord and wait for odin to display a "Device Added" message which tells you that odin sees your phone.
9) This is the tricky part and is all based on timing, so pay close attention.
10) You will now press the "Start" button in odin and wait for it to complete. It will display a green "Pass" message in the first box when it's done. At this time, the phone will reboot and will start with a slight vibration to notify you that it's booting up. It's exactly at the time that the phone vibrates that you need to immediately remove the micro usb cord and press and hold the volume up and volume down buttons simultaneously until cwm loads. If you miss this mark, android will boot, the install_recovery.sh script will run and overwrite the cwm you just flashed with the old stock 3e recovery (arghhh) and you will have to go through this process again.
If CWM complains about the install_recovery script, let it fix/remove it.
Once you have CWM flashed, you can use it to backup/restore your system, flash custom ROMs and you can even flash our CWM upgrades through CWM itself.
First Wood Woot !! And many thankyous.
Update-
This Rom is flawless so far. I have no issues that existed for me in CM10.2JB . Status Bar doesn't freeze. Apps aren't killed mid use. Calender sync was fixed by installing Google calendar from play store and then removing it. (I use Cal app). There's almost no lag in multi tasking. I'm very happy.?? kit Kat!
Let's all hit TFs donate button with a few bucks, eh?
Much appreciated. Downloading now.
Sweet, a thread here instead of g+!
Sent from my SGH-I757M using xda premium
For me the gallery issue was gone after switched to the next branch.
Crossbreeder won't install (it did on the earlier 4.4 builds).. but Adaway works just fine and everything's working smoothly. Love the music in the lockscreen! also noticed there's even more governor parameters to tweak, which is always a good thing
formercontra said:
Crossbreeder won't install (it did on the earlier 4.4 builds).. but Adaway works just fine and everything's working smoothly. Love the music in the lockscreen! also noticed there's even more governor parameters to tweak, which is always a good thing
Click to expand...
Click to collapse
That's due to the new recovery. If your on a Windows system, download 7zip if you don't have it already.
Here's what you do, open this roms zip file and extract only the update-binary from META-INF/com/google/android to a location on your computer. Then you can close the ROM zip. Now open the crossbreeder zip with 7zip and browse to META-INF/com/google/android and simply drag the extracted update-binary into the crossbreeder zip file replacing it's update-binary with the one from cm-11. Then close the zip and upload to your phone and flash away
Sent from my SGH-I757M using XDA Premium 4 mobile app
After running ROM for a few hours, I'm quite impressed. No issues so far. I will continue using it and report any findings. Thanks titanic for all your time and effort.
Sent from my SGH-I757M using Xparent Cyan Tapatalk 2
Phone won't boot
I flashed the rom and the gapps but I get no boot screen. I waited about five minutes and nothing happened. Any ideas on what went wrong??
Amazing
It's is so smooth, I am ecstatic to see how it'll be when ART becomes functional!
Thanks again!
omar.kassam97 said:
I flashed the rom and the gapps but I get no boot screen. I waited about five minutes and nothing happened. Any ideas on what went wrong??
Click to expand...
Click to collapse
Did you wipe and factory reset? Did you use the wipe to install new rom option?
This ROM must be flashed clean. No dirty flashing unless you already had cm-11 flashed.
Sent from my SGH-I757M using XDA Premium 4 mobile app
I am curious, in your 10.2 thread you said the calendar could not be assigned a gmail account in cm 11.
Was this resolved? For me it's a deal breaker (loving your cm10.2 anyways).
If it hasn't been fixed could we add it to the OP in the what doesn't work section?
Sent from my SGH-I757M using xda app-developers app
slushee said:
I am curious, in your 10.2 thread you said the calendar could not be assigned a gmail account in cm 11.
Was this resolved? For me it's a deal breaker (loving your cm10.2 anyways).
If it hasn't been fixed could we add it to the OP in the what doesn't work section?
Sent from my SGH-I757M using xda app-developers app
Click to expand...
Click to collapse
No, it's unfortunately not fixed and will definitely add that to the op
Sent from my SGH-I757M using XDA Premium 4 mobile app
Way to go Titanic! I will flash tomorow and try this one out.
Sent from my SGH-I757M using xda app-developers app
Philz touch cwm was just updated and now uses a new exfat module for mounting the sdcards. It's supposed to be faster than the fuse alternative. This version also fixes the resolution of the background image, the software buttons and the vibration.
http://forum.xda-developers.com/showthread.php?t=2552634
Sent from my SGH-I757M using XDA Premium 4 mobile app
The calendar works in slim. I think the calendar sync adapter is missing in cm-11. Can I get someone to add this apk to your /system/app dir give it the same permissions as the others, then reboot and try connecting the calendar to your Google account. I'm out of the house right now so can't test it myself.
titanic_fanatic said:
The calendar works in slim. I think the calendar sync adapter is missing in cm-11. Can I get someone to add this apk to your /system/app dir give it the same permissions as the others, then reboot and try connecting the calendar to your Google account. I'm out of the house right now so can't test it myself.
Click to expand...
Click to collapse
Yep, that worked. My Google account syncs now and i can create events. Thanks TF!
Sent from my SGH-I757M using xda premium
bijon440 said:
Yep, that worked. My Google account syncs now and i can create events. Thanks TF!
Sent from my SGH-I757M using xda premium
Click to expand...
Click to collapse
Excellent, I'll update the gapps package when I get home thanks for testing
Sent from my SGH-I757M using XDA Premium 4 mobile app