[ask] [Q] Flashing CM 10.1.1 v.6 by coldblue problem - Huawei Ideos X5 U8800

hey, i've try to using cm 10.1.1 v.6 by coldblue
during the installation i do full wipe; wipe data, wipe cache, dalvik cache, format system, format data, format cache. and then i reboot recovery, then i install the cm 10.1.1 after that i install the gapps jb light. and also i've my phone with forumber2 partition, but i've problem, my phone just stuck in cyanogenmod's bootanimation, can someone help me? pleasee

might be u have a wrong kernel?
check the file size of this file
/.cust_backup/image/boot.img
the one in the file CM10.1_u8800_v6.zip is 3 104 768 bytes, CRC is 54FBC46E
I am no expert.

Related

Bootloop

I'm getting stuck over CM bootanimation when I wipe cache and dalvik cahche after the installation of any zip file.
soyusado said:
I'm getting stuck over CM bootanimation when I wipe cache and dalvik cahche after the installation of any zip file.
Click to expand...
Click to collapse
Wipe all from stock recovery then reinstall rom.....
It's not a problem to me getting stuck, I just wanted to pointed out and see if someone is getting the same issue, I'm running the latest CM10 nightly.

[Q] No Baseband sometimes?

Hi usually change roms and kernels i do everything steps correctly but sometimes when it starts from zero it appears no simcard no baseband.
so i must reflash again factory image from google via fastboot so it's so annoying.
for example i wipe factory reset / data / dalvik i install .zip rom . zip gapps .zip kernel and reboot
im in the latest CWM and it happens to me now when i did a wipe cache and dalvik.
thank you

[Q] Reincarnation not booting

I am using GT S5360. I have installed reincarnation pre final and it didn't passed the screen where samsung galaxy Y GTs5360 comes.
I followed the whole procedure but not working. Any help ???
Did you flash kernel?
Mount system?
Remember that naturalizer or touchwiz rom isn't for galaxy y
after you flash percys cm#2 kernel you must reboot to recovery and wipe system data and cache before you flash the rom
the steps are as follows
go into cwm
mount system
flash percys #2 kernel
reboot to recovery
format system data cache
mount system data cache
flash rom zip
format data
restart
if the rom still doesnt boot after that take out your sim card
if the rom now boots you need to change your baseband by flashing a different stock rom firmware via odin
I flashed the jellybean version... I have restored the backup now and i followed all the steps... I flashed the zip file of kernel, rebooted recovery, formatted system, data, cache and then installed the rom... But it stucks on bootscreen... Dosen't even show the bootanimation...
Honey_singh said:
I flashed the jellybean version... I have restored the backup now and i followed all the steps... I flashed the zip file of kernel, rebooted recovery, formatted system, data, cache and then installed the rom... But it stucks on bootscreen... Dosen't even show the bootanimation...
Click to expand...
Click to collapse
Do this :
1.Go to CWM,mount all the partitions and flash the kernel.
2.Reboot the system and take out the battery and then put it again
3.Again boot into cwm and format system,data and cache
4.Go back and wipe data and cache
5.Again go to mounts and storage and mount all the partitions
6.Flash the rom and after that wipe data
7.Reboot
And burrrrrah!
Your new rom is ready!
Honey_singh said:
I flashed the jellybean version... I have restored the backup now and i followed all the steps... I flashed the zip file of kernel, rebooted recovery, formatted system, data, cache and then installed the rom... But it stucks on bootscreen... Dosen't even show the bootanimation...
Click to expand...
Click to collapse
go back into cwm and format data and restart
did you mount system data and cache before flashing the zip?
have you tried it without the sim card inserted?
aniket.lamba said:
Do this :
1.Go to CWM,mount all the partitions and flash the kernel.
2.Reboot the system and take out the battery and then put it again
3.Again boot into cwm and format system,data and cache
4.Go back and wipe data and cache
5.Again go to mounts and storage and mount all the partitions
6.Flash the rom and after that wipe data
7.Reboot
And burrrrrah!
Your new rom is ready!
Click to expand...
Click to collapse
Nthing happened
Still it stops at galaxy y gts5360 screen
marcussmith2626 said:
go back into cwm and format data and restart
did you mount system data and cache before flashing the zip?
have you tried it without the sim card inserted?
Click to expand...
Click to collapse
Yes, I mount the system and cache
Honey_singh said:
Nthing happened
Still it stops at galaxy y gts5360 screen
Yes, I mount the system and cache
Click to expand...
Click to collapse
have you removed the sim card and see if it booted - please do all the steps I mentioned

[Q] Rom flashing error?

I had 4.02 rom. I wanted to flash [ROM][27.04.2014] Unofficial Cyanogenmod 11.0 [4.4.2].
I wiped data, cache and dalvik cache. Then with cwm 6.0.2.8 i flashed but error:
cant open sdcard cm....zip (bad )installation aborted.
What can be reason?
I installed gaps but there is no playstore. With titanum backpro, i try to restore playstore but it fails. Also i restore calendar and sms, but after seconds they disappear.
Cursed Chico said:
I had 4.02 rom. I wanted to flash [ROM][27.04.2014] Unofficial Cyanogenmod 11.0 [4.4.2].
I wiped data, cache and dalvik cache. Then with cwm 6.0.2.8 i flashed but error:
cant open sdcard cm....zip (bad )installation aborted.
What can be reason?
Click to expand...
Click to collapse
I'm not sure but i think that you haven't installed Ble-Part partion
Hope that helps

Reboot loop after flashing from CM 12.1 to 13

Did system, cache and dalvik wipe.
Flashed CM 13 and tried to flash gapps 13, but all I could install was the pico version, because my system partition was too small.
After doing it I needed to wait about 2 minutes, then the app optimization started...96 apps and after that it kept rebooting and doing it all over again.
I again wiped cache and dalvik, but no change.
Any suggestions? I don't want to wipe data if possible.

Categories

Resources