help about screen - HD2 Android Q&A, Help & Troubleshooting and Genera

hi, ihad wndows phon 7.8 dynamics on my phone i dont have any problem.when i installed radio 2.12 my scren is turning off on days,and i installed windows 6.5 now,but the screen is not showing any thing and its black,i had this problem with some android roms,what am i doing now?
the installing winphone 7 i should change setting the magldr and i cant see the screen to change setting
please help me

dn.farzin said:
hi, ihad wndows phon 7.8 dynamics on my phone i dont have any problem.when i installed radio 2.12 my scren is turning off on days,and i installed windows 6.5 now,but the screen is not showing any thing and its black,i had this problem with some android roms,what am i doing now?
the installing winphone 7 i should change setting the magldr and i cant see the screen to change setting
please help me
Click to expand...
Click to collapse
pls answer me

dn.farzin said:
pls answer me
Click to expand...
Click to collapse
Remember, give it some time before reposting. XDA members live around the world and are not going to be
on your time zone and schedule. Wait a day and see if you get a response. If you want a notification of
someone else posting into that thread, click on the Thread Tools button at the top of the thread and choose
Subscribe, or click the Subscribe button at the top of the page.
Please do not simply "bump" the thread up. Add some more information as to additional things you have
tried to resolve the problem since your last post.
Click to expand...
Click to collapse
2 hours are not enough
If 2.12 radio is giving you the problem, why not flash 2.15 (or whatever you were on) radio back?

Marvlesz said:
2 hours are not enough
If 2.12 radio is giving you the problem, why not flash 2.15 (or whatever you were on) radio back?
Click to expand...
Click to collapse
sry for my late
yes,i changed the radio to 2.15 and installed the winphone,last night i dont have the problem but this day i have this,what is the problem?what am i doing?changing the its very dificualt when dont have screen and when i changing or reisntalling the rom problem is fixing !!!

I remember you have had this issue when you wanted help with something else, maybe the device is faulty? If the device is not functioning properly under Windows Mobile 6.5, then it almost certainly requires hardware repair.

Marvlesz said:
I remember you have had this issue when you wanted help with something else, maybe the device is faulty? If the device is not functioning properly under Windows Mobile 6.5, then it almost certainly requires hardware repair.
Click to expand...
Click to collapse
when i installed windows 6.5, i dont have problem,i think this problem is about my sd card,because my sd card is chard,and when i installing windows phon,the installer on pc give me eror create partision sd card,and i should to format sd card and reinstalling again windows phone,and this day when i want to install zip file from my recovery,i have this problem to and its saying no sd card and i should to formating again,how about your view?
now i installed android nand on my phone,and tomorow i testing,if i have this problem to,maybe my problem is not about software

If you're suspecting an SD-card issue, simply try another card. If it's working fine, then I recommend ditching your old one and getting a new one. Even if you format it and it works once, that doesn't mean you won't have problems with your OS in the future. Better safe than sorry.

Marvlesz said:
If you're suspecting an SD-card issue, simply try another card. If it's working fine, then I recommend ditching your old one and getting a new one. Even if you format it and it works once, that doesn't mean you won't have problems with your OS in the future. Better safe than sorry.
Click to expand...
Click to collapse
i installed android nand os!and i have this problem to!i Accuracing my lcd have problem when i under sun,and i have this problem until changing rom!what am i doing now?pls help,i need my phone because i working with my phone

Did you change the sdcard? (although this sounds like a hardware thing)

Marvlesz said:
Did you change the sdcard? (although this sounds like a hardware thing)
Click to expand...
Click to collapse
no! i didnt,i installed rom with that sd card,i think to lcd sensor,its may about it problem?

dn.farzin said:
no! i didnt,i installed rom with that sd card,i think to lcd sensor,its may about it problem?
Click to expand...
Click to collapse
It could be the infamous digitizer thing, or the sd card that you refuse to change

dn.farzin said:
pls answer me
Click to expand...
Click to collapse
Hi my friend,
not alone is the radio your problem, should be 2.15, but I also think you have a hardware problem with your display (connection with motherboard). The only way to test this out, is the following:
1. Dowmload with your S/N the official HTC HD2 3.15 ROM
2, Connect your device with laptop/PC and flash thus original ROM, you will than have also Radio 2.15
3. After installing perform a HR and thereafter a SR and see what your display does. Do not install anything else but the original ROM and look for two days what wour display does.
and, oh yes, perform a HR (windows - setings - system - vlean storage) before performing these 3 steps,
kindest regards, Kuzibri

kuzibri said:
Hi my friend,
not alone is the radio your problem, should be 2.15, but I also think you have a hardware problem with your display (connection with motherboard). The only way to test this out, is the following:
1. Dowmload with your S/N the official HTC HD2 3.15 ROM
2, Connect your device with laptop/PC and flash thus original ROM, you will than have also Radio 2.15
3. After installing perform a HR and thereafter a SR and see what your display does. Do not install anything else but the original ROM and look for two days what wour display does.
and, oh yes, perform a HR (windows - setings - system - vlean storage) before performing these 3 steps,
kindest regards, Kuzibri
Click to expand...
Click to collapse
thanks,how can i find original rom?and dont problem to installing original rom?

Marvlesz said:
It could be the infamous digitizer thing, or the sd card that you refuse to change
Click to expand...
Click to collapse
i dont now!i installed winphone 6.5 energy and its not launched and the screen turned off!!!
what am i doing?

Related

My HD2 is very unstable with different ROMS. Help please

Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.
I have no idea about whats wrong but this has been a common issue/problem for many members...I don't think I saw this many issues with the HD...I dunno whats wrong with HD2 or the ROMs that it starts freezing for some...maybe the HSPL is buggy? I dunno to be honest.
maybe you should install a stock rom in between or go to MTTY and see if that fixes the issues for you.
Overall tho, its frightening to see how many people have freezing issues with Sense after flashing a couple of custom ROMs...I'm afraid it might eventually happen to everyone and thats why we need to find out what is causing this.
BTW try to format your SD card and then flash a stock ROM without the SD card and see if there is any improvement...my guess is that it will work fine again (for a while at least).
What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
- Make a reset and do not enter the pin code of your sim card (on my device this was making a difference, if you do not have a pin code maybe you should take out your sim card that the phone cannot connect)
- Go to the settings and unselect in "Today" "HTC Sense"
Than you should have the normal "speed" of the device and you should be able to start sk tools and change the booting order.
It looks like that - depending on the start up order that applications - processes are waiting for each other and using nearly 100% of cpu power and you have therefore the impression that the device is frozen.
I am sorry I do not know how to change the startup order without sk-Tools
Best regards,
dingolino
tommyjakobsen said:
Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.
Click to expand...
Click to collapse
tommyjakobsen said:
Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.
Click to expand...
Click to collapse
try the strenas rom (arthemis V2). It has solved my pb
[email protected] said:
I have no idea about whats wrong but this has been a common issue/problem for many members...I don't think I saw this many issues with the HD...I dunno whats wrong with HD2 or the ROMs that it starts freezing for some...maybe the HSPL is buggy? I dunno to be honest.
maybe you should install a stock rom in between or go to MTTY and see if that fixes the issues for you.
Overall tho, its frightening to see how many people have freezing issues with Sense after flashing a couple of custom ROMs...I'm afraid it might eventually happen to everyone and thats why we need to find out what is causing this.
BTW try to format your SD card and then flash a stock ROM without the SD card and see if there is any improvement...my guess is that it will work fine again (for a while at least).
Click to expand...
Click to collapse
Thanks for your reply.
I will try what you suggest later today and then write back the results here. It would be very nice if we could solve this issue.
I don't really get that MTTY thing. What exactly does it do?
willbread said:
try the strenas rom (arthemis V2). It has solved my pb
Click to expand...
Click to collapse
Can you only use that ROM? Have you tried flashing another one after strenas?
I would really like to use l3v5y's ROM.
dingolino said:
What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
- Make a reset and do not enter the pin code of your sim card (on my device this was making a difference, if you do not have a pin code maybe you should take out your sim card that the phone cannot connect)
- Go to the settings and unselect in "Today" "HTC Sense"
Than you should have the normal "speed" of the device and you should be able to start sk tools and change the booting order.
It looks like that - depending on the start up order that applications - processes are waiting for each other and using nearly 100% of cpu power and you have therefore the impression that the device is frozen.
I am sorry I do not know how to change the startup order without sk-Tools
Best regards,
dingolino
Click to expand...
Click to collapse
Very interesting dingolino!
Later today I will give that a shot aswell on l3v5y's ROM. Will report back.
tommyjakobsen said:
Thanks for your reply.
I will try what you suggest later today and then write back the results here. It would be very nice if we could solve this issue.
I don't really get that MTTY thing. What exactly does it do?
Click to expand...
Click to collapse
When you flash lots of cooked roms, they get "bloated" and the devices started hard-resetting for no reason. this is because of files from old roms being left when the new rom is flashed.
MTTY allows you to enter the device on bootloader and use service commands to format the file system on the device so you can remove all rom files before flashing a new rom!!
Click to expand...
Click to collapse
basicly it will format your system and make sure you don't have any files from older roms left on the system which might cause this issues.
tommyjakobsen said:
Can you only use that ROM? Have you tried flashing another one after strenas?
I would really like to use l3v5y's ROM.
Click to expand...
Click to collapse
i tried too l3v5y's ROM and it didn't work. But maybe, your pb is not exactly same as mine.
Do you you a 16 GB card ? for me, it's certainly cause of pb because i can use every rom without sd card
Try to ask more to sternas but i noticed he prefer keep his cook secrets
Try to install "official" 1.61, make HR after boot. After next reboot connect with PC and flash with any cooked ROM. I had the same problems like you and this helped me...
Petulinek said:
Try to install "official" 1.61, make HR after boot. After next reboot connect with PC and flash with any cooked ROM. I had the same problems like you and this helped me...
Click to expand...
Click to collapse
and for me, this didn't help me
willbread said:
i tried too l3v5y's ROM and it didn't work. But maybe, your pb is not exactly same as mine.
Do you you a 16 GB card ? for me, it's certainly cause of pb because i can use every rom without sd card
Try to ask more to sternas but i noticed he prefer keep his cook secrets
Click to expand...
Click to collapse
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out. I suppose you have configured your HD2 for emails or MS Exchange pushmail?
Edit : If you already experience the slowdown caused by inserting the SD Card, MAKE SURE you reboot your HD2 before re-inserting the SD card.
I had this "freezing during startup" with a number of roms (always after I installed my software) and since that I am always "tweaking" it by the startup order as I described it and was able to solve it!
I do not think that it is hardware related in the amount of cases which are reported. And I am also not a strong believer of this "flashing" and mtty discussion (it could be a solution is some cases but I do not think in this relatively larger number of cases which are reported).
For most of the rom cookers it is not the 1st rom cooking they are doing and the HD2 is not the 1st HD2 device for HTC as well. This is the reason why I do not think that there is a principle rom problem nor a principle hardware problem
Manila Sense is a complex pcs of software and the startup is therefore more complex.
Depending on the tweaks the rom cookers are doing on the XIP and other WM internals there could be a timing interfearance during booting and this is creating the trouble for Manila Sense startup (network, phone, etc.).
Reminds me to the "good old days" with ATART-ST where you had dedicated tools to rearrange the startup seaquenze of the Accessories
At least i think it is worth trying it, you cannot loose anything.
But I played not only with the finaly boot order of htc-Sense (the last one) but also I put other elements in a different order.
Sometimes it was helping to install Panolauncher and put it before HTC Sense startup - I had the impression that just having another application before HTCsense made an improvement to "give HTCSense" more time.
Does not sound like science but a little bit like Voodoo ...
My Autostart folder (only the applications)
1. poutlook.lnk
2. BTTrayCE.lnk
3. De|WMPTempFolder.lnk
4. PKG.lnk
5. Lotus Traveler.lnk (installed by me)
6. LotusPRUploader.lnk (installed by me)
7. Panolauncher.lnk (installed by me)
8. OM10QS.lnk (installed by me - Opera 10 beta)
9. HTCStartUp.lnk
Good luck
dingolino
tommyjakobsen said:
Very interesting dingolino!
Later today I will give that a shot aswell on l3v5y's ROM. Will report back.
Click to expand...
Click to collapse
gohyc said:
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out.
Click to expand...
Click to collapse
i haven't the folder "\Application Folder" on my card. Maybe, this is why this rom works well
I haven't verifyed before so i can't tell you if i had it before
Hi,
could you try to flash ROM that have manila 1921 (manila without document tab),
I facing so many problem when I install ROM with manila 1922 (manila got document tab)
Now has been 4 day, without any problem flash ROM with manila 1921...
give a try...
mtty may help u out
dingolino said:
What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
dingolino
Click to expand...
Click to collapse
so i just got the last version of sktools.....could anybody please explain how I can change the startup order? sktools has allot of tools and I just cant figure out how its done!
thanx!
Hi,
sounds to me like you have flashed so many times you HD2 has become "Bloated"
this is where for eg, Rom X is 110Mb, and then you Flash Rom Y which is only 100Mb.
When you do the flash there is 10Mb of residual files left from the previous rom., when this happens often you get strange things happening like you describe and worse, your device can start hard resetting for no reason!!
Go to this thread (swap the ** for tt ) h**p://forum.xda-developers.com/showthread.php?t=616422 (I cant post links yet!!) and it will fix your issue. (The thread has been shut as there has been a big argument over it, something to do with a disagreement over drivers!! - how gay!)
I can honestly say, although i have only joined recently, i have been a user of this method for about 6 years, I personally know the Guy who opened the thread and i would stand buy him 100%.
Although the thread is closed, i will help with queries via PM if you like!
SS
gohyc said:
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out. I suppose you have configured your HD2 for emails or MS Exchange pushmail?
Edit : If you already experience the slowdown caused by inserting the SD Card, MAKE SURE you reboot your HD2 before re-inserting the SD card.
Click to expand...
Click to collapse
I tried deleting the \Application Folder folder and reset the phone.
Of course this equaled a hard reset as all system data stored was in \Application Folder.
So I removed my storage card and did a hard reset so that the system data will not be stored in the storage card.
Hopefully this will be make the device more stable as such.
use the mtty to format ur device first, then flash the rom u want to flash.
I have encountered the same issues just like u, after use the MTTY, so far so good.
the post is kind of complex, but it is worth to have a try.

[Tutorial]Beginner Android setup

Hey, since there is many requests for how to setup the android on you'r HD2, i was thinking "why dont i make one?" So here it is.
PS!!! My english is not the greatest.
First download this radio if you dont have it (recomended): 2.10.50.08_2
And install it, boot up you'r HD2. A stable ROM is also recomended.
Second download one of the builds from: Here
Third: Clear you'r SD card (Only if you have a low mb sd card) You dont really have to, but if you do, u might get some smoother speed.
Four: Extract the build you downloaded to you'r desktop on you computer and Copy the files inside the folder you extracted to. ALL files. and past them into you SD card. (VIA USB) once done, unplug you'r usb cable. (If u choosed the froyo build, just put the whole android folder to the root of you'r card)
Five: Disable the auto backlight in the WM first before you start android, Select file explorer on you'r HD2 (or simular programs) And go into you'r SD card Run clrcad (for the sound, If nothing happends, dont worry, dont supposed to) and run Haret. Then after the build has booted, plug you'r USB cable in you'r HD2 again (Android drains battery atm).
Six: Enjoy!
Note: If you'r screen turns black, turn off auto backlight. If it's still black, change radio. AND!!! This dont kills you'r winmo.
I'm non genius but i made this to help you guys.
Please correct me if i am wrong.
Cheers!
Hi,
Thanks for the info but I have done all that without the radio update. I'm running a stock vodafone ROM. I manage to get the haret launched and all the code scrolling but then the screen just fades to black and doen't finish the boot up... Is it the lack of the radio update doing this?? I'm not very clued in on this stuff.
Cheers!
FreddernLFC said:
Third: Clear you'r SD card (i did, dont know if it's recomended)
Click to expand...
Click to collapse
No need to clear your SD card (I never did). It does make it easier to switch between builds, though, since you can just delete everything and copy over the next one you want to try.
chazzerchops said:
Is it the lack of the radio update doing this?? I'm not very clued in on this stuff.
Click to expand...
Click to collapse
Yes, most likely. What you're reporting sounds like what other people had before they installed a compatible radio.
Just want to add:
1. depends on the build, you have to extract the content to SD based on the instruction. (for example, the Froyo build you have to extract all files to a folder named "android" at the root of SD)
2. Must disable the auto backlight in the WM first, else you will some times get the "black screen". If you look carefully or under strong light, you'll still see things on screen, there is just no back light.
2. Run clrcad before Haret to get the sound working.
Cheers Meptik
I am looking to update the radio version... it that like doing the full ROM thing, in that it will re-set everything to factory default? Or is the radio update not as 'back to square one' on the phone as doing the ROM?
chazzerchops said:
Cheers Meptik
I am looking to update the radio version... it that like doing the full ROM thing, in that it will re-set everything to factory default? Or is the radio update not as 'back to square one' on the phone as doing the ROM?
Click to expand...
Click to collapse
Updating only the radio shouldn't reset your HD2 to factory default, unless perhaps if you flash it using a stock ROM Update Utility.
Use the radio that FreddernLFC links to from the first post; it includes a CustomRUU, which should flash the radio to your HD2 without restoring it to factory defaults.
Hmmm.. will have another look at it. Ran through the updater and 5mins into it it errored so had to go through the recover process. I'll try again later. Cheers
meptik said:
No need to clear your SD card (I never did). It does make it easier to switch between builds, though, since you can just delete everything and copy over the next one you want to try.
Click to expand...
Click to collapse
Mine didn't work with stuff on my 8Gb card so I copied the whole card to my PC, reformatted the card, copied over the Android stuff and it then worked. I the copied all the back up stuff back and Android stopped working (tty error).
green screen
what do i do if i get a green screen...i ran haret..now i see a green screen
psn1819 said:
what do i do if i get a green screen...i ran haret..now i see a green screen
Click to expand...
Click to collapse
Take out the battery and start up again, I've got many green screens, but after some tryes it went perfect
psn1819 said:
what do i do if i get a green screen...i ran haret..now i see a green screen
Click to expand...
Click to collapse
You try again. Common issue.
Hi Everyone, just wanted to add a few things. i would recommend you turn off sense from the device, then power off the device, once it powers on again go straight to your file explorer and run the process. you should notice the cursor at the bottom blink at a slower pace, if its in hyper mode the system will crash. it has been helping me, hopes this helps to all
what is this hyper mode what causes it i had to down gade my radio to 2.10.50.26 to get rid of the super fast un usableness of the 2.12.50.xx but i did like my 2.12.50.xx radio wish there was a way to make it work with that radio
FreddernLFC said:
...
Five: Disable the auto backlight in the WM first before you start android, Select file explorer on you'r HD2 (or simular programs) And go into you'r SD card Run clrcad (for the sound, If nothing happends, dont worry, dont supposed to) and run Haret. Then after the build has booted, plug you'r USB cable in you'r HD2 again (Android drains battery atm).
...
Click to expand...
Click to collapse
how fast android drains battery ?
sev15 said:
what is this hyper mode what causes it i had to down gade my radio to 2.10.50.26 to get rid of the super fast un usableness of the 2.12.50.xx but i did like my 2.12.50.xx radio wish there was a way to make it work with that radio
Click to expand...
Click to collapse
i assume u can carry on 2.12.50.xx ? dont need to downgrade .. as long as its a .50 radio it shld be fine and pretty new shld be alright .. am i right guys ?
i jus downloaded the desirrev4 build. so i just have to extract all files into the root storage card ? then run clrcad before haret and thats it ?
may i check , does this kills my existing wm rom ? how to switch back to my original wm ? i have read this is a kind of multi boot method . apologies for noob questions .. would appreciate if someone can advice. thanks !
pool7979 said:
i jus downloaded the desirrev4 build. so i just have to extract all files into the root storage card ? then run clrcad before haret and thats it ?
may i check , does this kills my existing wm rom ? how to switch back to my original wm ? i have read this is a kind of multi boot method . apologies for noob questions .. would appreciate if someone can advice. thanks !
Click to expand...
Click to collapse
winmo still remains there but sometimes you might need to hard reset
just switch off the phone in android or take out the battery and reboot, you are on win mo again.
good luck
How long does it spend? Because I am waiting for a long time.
thihaz said:
winmo still remains there but sometimes you might need to hard reset
just switch off the phone in android or take out the battery and reboot, you are on win mo again.
good luck
Click to expand...
Click to collapse
thanks man !!! cool .. i have just installed android .. but i choose the sense interface. i noticed our hard buttons are not suppose to work right ? and do we have to run clrd and haret everytime we wanna start android ?
on regards to installations of android software, they will be on storage card ?
for the bro above, my running of andoid was fast .. i think less than 5 mins .. after haret, i see many words scrolling .. very fast .. then the next moment , it loads into android and will ask u what interface u want .
vdesire v5 out

[Q] Please... Can somebody help me to 'get rid of' Android on my phone...?

As the headline says: I want to remove, or go back to WM, but without deleting everything and go back to scratch... I have some appointments that I want to save, and that I don't have anywhere else... (I can't find them now that Android is running...)
Please, please help me...
(Could the software make my appointments disappear?
Can somebody see if these software information is 'correct':
OS Version
5.2.23138
Manila version
2.5.20183025.0
ROM version
18.Sep.2010 WWE
Radio version
2.07.51.22_2
Protocol version
15.32.50.07U
Just reboot your phone.
reboot? as in turning it off and on? It doesn't work... And neither does taking the battery out.... Sorry, my english is very bad, so I don't know what reboot is, or how I do it... Thnx...
kjessa_83 said:
reboot? as in turning it off and on? It doesn't work... And neither does taking the battery out.... Sorry, my english is very bad, so I don't know what reboot is, or how I do it... Thnx...
Click to expand...
Click to collapse
you've posted in four threads that you can't get back to windows. If you shut the phone down and power on again, its simply not believable that you can't get into windows. if you are using an auto bootloader, then it should at least briefly give you an option to boot into windows. so, are you using an autoboot program?
If you happened to install a rom that autoboots android, (I'm guessing, can't see any other reason why a reboot wouldn't work), try turning off your phone, taking out the sdcard, then booting it up.
I'm sorry, but I don't know what to do... There's so many things that doesn't work.. That's why I posted it so many places... I don't know if I am using an autoboot program or not.. I followed the instructions from Youtube that everybody were positive about. And no, I don't get the option to boot into windows when I reboot the phone..
Android boots from your SD card so justtake it out and reboot phone and android wont load up.
Once in there you can uninstall the autoboot or flash a new version of windows or whatever you need to do.
No, that didn't work either... I thought it was very strange, because I heard about people who switched between android and wm... So I don't know what's wrong...
kjessa_83 said:
No, that didn't work either... I thought it was very strange, because I heard about people who switched between android and wm... So I don't know what's wrong...
Click to expand...
Click to collapse
If you take the SD card out like others had suggested and turn your phone off and on, Android won't boot as it runs off the SD card (for the time bing anyway).
No SD card = No Android
kjessa_83 said:
No, that didn't work either... I thought it was very strange, because I heard about people who switched between android and wm... So I don't know what's wrong...
Click to expand...
Click to collapse
If after removing SD card and rebooting you still boot into Android, then you either :
1. have a NAND version of Android (not sure if that's even available now)
2. have an Android phone (top part of Evo looks like Leo)
Sorry, but my SDcard is on the table, and Android is still running... What have I done...?
like i said, you either have :
1. NAND version of Android (not sure if this is even available)
or 2. an actual Android phone (top part of Evo looks like Leo)
kjessa_83 said:
Sorry, but my SDcard is on the table, and Android is still running... What have I done...?
Click to expand...
Click to collapse
Did the youtube video you watched, ask you to flash a new WM rom. Are you sure your not mistaking your new WM rom as android, as it possibly looks different to your original ROM (which if you havnt backed up your data, you've already lost those appointments)
I suggest you watch a video of andriod, and see if it looks the same as your phone.
If it does, and your phone is definetily a HD2 Leo, and Android is running, Do you know anybody that goes by the name of Cotulla?....lol.
MaxSense modification for sense is an Android like interface.
I have neither NAND version nor Android phone...
kjessa_83 said:
As the headline says: I want to remove, or go back to WM, but without deleting everything and go back to scratch... I have some appointments that I want to save, and that I don't have anywhere else... (I can't find them now that Android is running...)
Please, please help me...
(Could the software make my appointments disappear?
Can somebody see if these software information is 'correct':
OS Version
5.2.23138
Manila version
2.5.20183025.0
ROM version
18.Sep.2010 WWE
Radio version
2.07.51.22_2
Protocol version
15.32.50.07U
Click to expand...
Click to collapse
Are these settings showing on your phone Under settings / about phone / software information?? If so you are in WM, not Android. And sorry to say you have lost your appointments, unless you backed them up using PIM backup or something similiar, which im guessing from this thread you didn't.
Just by looking at this Ive determined that the OP doesnt really know what he is doing at all. The software information that he posted indicates he flashed a custom WM rom (probably energy) and thinks its android.
kjessa_83: You are running a custom version of WM, NOT android!! If you want to go back to the original rom, I suggest you find the official rom, and flash that. Btw, if you cant tell the difference between WM and android, maybe you shouldnt be messing around with the phone...
The folder that I copied to my SDcard is called Android, so how come it's WM?
bobmarsh72 said:
Did the youtube video you watched, ask you to flash a new WM rom. Are you sure your not mistaking your new WM rom as android, as it possibly looks different to your original ROM (which if you havnt backed up your data, you've already lost those appointments)
I suggest you watch a video of andriod, and see if it looks the same as your phone.
If it does, and your phone is definetily a HD2 Leo, and Android is running, Do you know anybody that goes by the name of Cotulla?....lol.
Click to expand...
Click to collapse
Cotulla? huh, why?
It's for sure that I don't know what I'm doing... But I thought that if I did what "autotradeking" did in his video, I wouldn't do anything wrong...??

[Q] how can I get Windows 7 ???

hy guys,
I am a noobie in instaling W7 on hd2
How stable is the W7 ROM now and how easy is to install it?
some links will be perfect
I saw there are 2 difrent ways to install w7. wich one is the best?
i am reading xda forum for the last 5 hours and i cant find a start point.
Please help!
Sorry if this post is in the worng section!!!!!!!!!
my hd2 detailes are:
- radio version 2.15.50.14
- manila version: 2.5.20181527.0
- G 15.42.50.11U
- D 3.14.04666
on the collored screen: PB81100 HX-BC
SPL- 2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
It was installed a w7.5 on my hd2, so I know that it works and it works perfect!
Much apreciate your help!
Thank you!
Rom here
http://forum.xda-developers.com/showthread.php?t=1356833
Other rom here
http://forum.xda-developers.com/showthread.php?t=953078
Guide here
http://forum.xda-developers.com/showpost.php?p=21010262&postcount=1217
That's the easiest way. Remember that you'll louse EVERYTHING personal on your phone...
Also, there is a third rom ATM, but it requires more work to get to the latest version. Although it allows for more flexible features and updating..
Couldn't be more clear I guess
kid1988 said:
Rom here
http://forum.xda-developers.com/showthread.php?t=1356833
Other rom here
http://forum.xda-developers.com/showthread.php?t=953078
Guide here
http://forum.xda-developers.com/showpost.php?p=21010262&postcount=1217
That's the easiest way. Remember that you'll louse EVERYTHING personal on your phone...
Also, there is a third rom ATM, but it requires more work to get to the latest version. Although it allows for more flexible features and updating..
Couldn't be more clear I guess
Click to expand...
Click to collapse
FANTASTIC!!!
Thank you!!!!!!!
I will start flashing right now!
not workink!
manneged to install leo70, os version 7.0.7004.0 and I think is not a very good ROM.
it works without a sdcard. why?
i did a hardspl. whats the next step?
how can I go back to windows6.5 original?
anny ideeas?
thanks
cosmin_f said:
manneged to install leo70, os version 7.0.7004.0 and I think is not a very good ROM.
it works without a sdcard. why?
i did a hardspl. whats the next step?
how can I go back to windows6.5 original?
anny ideeas?
thanks
Click to expand...
Click to collapse
Try installing a better rom such as YukiXBMod, PDA's, or HD2O at 8107. I've been using WP7 and it has been by far the best OS I've ever used.
The speed of the phone also depends on your SD card. If it's sluggish, more than likely, your card isn't compatible.
ayopancheezy said:
Try installing a better rom such as YukiXBMod, PDA's, or HD2O at 8107. I've been using WP7 and it has been by far the best OS I've ever used.
The speed of the phone also depends on your SD card. If it's sluggish, more than likely, your card isn't compatible.
Click to expand...
Click to collapse
can I have the exact links? please
do I need to uninstall this w7 that is running now? how?
I tried from htc's website this ROM Update for HTC HD2 (3.14.405.2), but I get the 260 error.
I tried to go with 23.Langs+HD2+Pdaimatejam+Rom+Wp7.5+mango+7.10.8107.79+v6.5 but I cant extract the files. I get an error.
please help!
thank you
cosmin_f said:
can I have the exact links? please
do I need to uninstall this w7 that is running now? how?
I tried from htc's website this ROM Update for HTC HD2 (3.14.405.2), but I get the 260 error.
I tried to go with 23.Langs+HD2+Pdaimatejam+Rom+Wp7.5+mango+7.10.8107.79+v6.5 but I cant extract the files. I get an error.
please help!
thank you
Click to expand...
Click to collapse
manneged to go back to windows 6.5 BUT I do have a very big problem:
MY SDCARD SHOWS ONLY 200MB! IT IS A 4GB ONE AND A BRAND NEW ONE!
why?
cosmin_f said:
manneged to go back to windows 6.5 BUT I do have a very big problem:
MY SDCARD SHOWS ONLY 200MB! IT IS A 4GB ONE AND A BRAND NEW ONE!
why?
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=977
all the roms available are in that thread. i'm using HD2O and it's fantastic. I'm not going back to Android. everything runs much smoother and i use my phone more rather trying to customize it like on the android.
and your SD card says only 200mb available because when you flashed WP7, it locked your SD card. there are only a few ways to unlock it.
i suggest you reflash WP7 again. It's a great OS.
ayopancheezy said:
http://forum.xda-developers.com/forumdisplay.php?f=977
all the roms available are in that thread. i'm using HD2O and it's fantastic. I'm not going back to Android. everything runs much smoother and i use my phone more rather trying to customize it like on the android.
and your SD card says only 200mb available because when you flashed WP7, it locked your SD card. there are only a few ways to unlock it.
i suggest you reflash WP7 again. It's a great OS.
Click to expand...
Click to collapse
Tried
23.Langs+HD2+Pdaimatejam+Rom+Wp7.5+mango+7.10.8107.79+v6.5
and
HD2 Pdaimatejam Rom Wp7.5 mango 7740 v1
but i got this errors
WTF its going on?????????
I will leave this hd2 to rust and I will stick wiyh my desire hd!
cosmin_f said:
Tried
23.Langs+HD2+Pdaimatejam+Rom+Wp7.5+mango+7.10.8107.79+v6.5
and
HD2 Pdaimatejam Rom Wp7.5 mango 7740 v1
but i got this errors
WTF its going on?????????
I will leave this hd2 to rust and I will stick wiyh my desire hd!
Click to expand...
Click to collapse
you simply not read instructions (tutorial) how to install this ROM.... you already ask this question under ROM topic....
You are flashing the rom incorrectly.
Under the rom thread you wish to flash, please read the instructions first. All the Rom creators usually edit their thread to make sure the instructions are included. The instructions are also included in the DWI.exe file. You are just not reading it.
1. Turn off the phone completely.
2. Turn it back on and hold the shut down button until you reach the MAGLDR screen.
3. Press the green button on "USB Flash"
4. On your screen, it will load and say USB Flash ready!
5. Unrar the files and place them somewhere like your desktop.
6. Open "DWI.exe" and make sure you Ran it as ADMINISTRATOR.
7. Read everything or simply skim through it.
8. Keep clicking Next and watch everything finish on both your computer and phone screen.
9. Wait for it to boot up. It usually takes around 5-10 minutes.
kid1988 said:
Rom
Guide here
http://forum.xda-developers.com/showpost.php?p=21010262&postcount=1217
Couldn't be more clear I guess
Click to expand...
Click to collapse
Excellent and thanks very much. Too much head spinning information on sticky and almost gave up. Following linked guide took me less than 1hr and that including some partition errors + sd card not recognised msg on first try. Missed the part :
2.GO to services and activate the last 24mb of RAM
3.Also in services do format MBR
Now need activation. Just a quick one: can I change the sim(number) after received the code? Or the code is only valid for given phone number to MS chat agent?
cheers.
dont worry give your original number...code is valid only for the live account...
Actually, Activation works
Tried on different phones, different rom, different SN (all HD2 though) different sims (also no sim) and different live account. Activation just always works.
Code is for a live account.. But you can use it on another account after 30days if the earlier account stays unused / withdrawn.... So you can use it on different phones, and and yes on different accounts too.. The problem comes when you want to install the same app you have on one phone-live account from marketplace...again on another phone with same account.... It says already installed
Sent from my HTC HD2 with WP7.5/android miui using tapatalk
Google or bing for it =)

[q] i need help asap!!!!!!!!!!!!!

OK,I ve made a thread before but none seems to be interested...I have a T-mobile htc hd2 tha runs on custom winmo6.5 rom...i want to install wp7 but as soon as i install em touchscreen does not respond at all...then i get back to winmo6.5 and everything works great...i ve tried hundreds of tutorials and performed every step very carefully...PLEASE HELP ME!
yeah I think I remember, did you try android?
did you try downloading the latest Original HTC ROM un-modded directly from them and SD card install it?
Its possible that the digitiser is just slightly different for one reason or another than other peoples devices which might not play well with the driver?
have you tried out the ultrafruit ROM, that uses a different drive to Pdamatejam so try them both?
it could well be hardware mate, even corrupt RAM can give off some odd behaviour if you didn't get the answer you were looking for before then its likely that we didn't have an answer to help you.
oh PS
im not one for picking up on spelling and grammar etc (mine sucks!) but see the use of ! you don't really need more than 3, like this!!!
more often than not 1 will suffice!
dazza9075 said:
yeah I think I remember, did you try android?
did you try downloading the latest Original HTC ROM un-modded directly from them and SD card install it?
Its possible that the digitiser is just slightly different for one reason or another than other peoples devices which might not play well with the driver?
have you tried out the ultrafruit ROM, that uses a different drive to Pdamatejam so try them both?
it could well be hardware mate, even corrupt RAM can give off some odd behaviour if you didn't get the answer you were looking for before then its likely that we didn't have an answer to help you.
oh PS
im not one for picking up on spelling and grammar etc but see the use of ! you don't really need more than 3, like this!!!
more often than not 1 will suffice!
Click to expand...
Click to collapse
thanks a lot matethis was the most complete answer i could get...as soon as i try everything i will tell you...thanks again
tsagas said:
thanks a lot matethis was the most complete answer i could get...as soon as i try everything i will tell you...thanks again
Click to expand...
Click to collapse
be careful of ultrafruit...i've read it's buggy...you probably want to try yuki/xbmod back to the future rom. just make sure you install the devstoragelock.cab so you can unlock your sd card before flashing another wp7 flavor.
i believe i responded to your original thread and asked which rom you were using and also if you performed the required magdlr prep steps? i don't think you ever answered. the prep steps being 10-services, 5-clear mbr, and 4-uselast24nand...then flash.
perform task29, install magdlr, perform prep, flash.
hjhjhj said:
be careful of ultrafruit...i've read it's buggy...you probably want to try yuki/xbmod back to the future rom. just make sure you install the devstoragelock.cab so you can unlock your sd card before flashing another wp7 flavor.
i believe i responded to your original thread and asked which rom you were using and also if you performed the required magdlr prep steps? i don't think you ever answered. the prep steps being 10-services, 5-clear mbr, and 4-uselast24nand...then flash.
perform task29, install magdlr, perform prep, flash.
Click to expand...
Click to collapse
I ve done whatever u said and still touchscreen is dead...why do i need to unlock the sd card and how do i know that mine isnt unlocked?
tsagas said:
I ve done whatever u said and still touchscreen is dead...why do i need to unlock the sd card and how do i know that mine isnt unlocked?
Click to expand...
Click to collapse
yuki/xbmod's bttf rom is the only rom that locks the sd card. if you haven't used bttf then you have nothing to worry about. also, if your sd was locked the card would be useless period. the card would not be recognized by any pc nor phone until unlocked again.
like i said try bttf rom and see if it makes the screen work. i believe hd2o, ansar, and pdajim's, and others use the ultrafruit as their core. bttf is pure original microsoft wp7 base...and was working long before ultrafruit even came out.
hjhjhj said:
yuki/xbmod's bttf rom is the only rom that locks the sd card. if you haven't used bttf then you have nothing to worry about. also, if your sd was locked the card would be useless period. the card would not be recognized by any pc nor phone until unlocked again.
Click to expand...
Click to collapse
Ok,i will install it and then tell you...but i am sure that my touchscreen won't response...any idea what may causing it?do i need to change digitizer?I've changed once...
tsagas said:
thanks a lot matethis was the most complete answer i could get...as soon as i try everything i will tell you...thanks again
Click to expand...
Click to collapse
I ve installed ultrafruit and still touchscreen does'nt respond...at least i have functionallity of the power button now...that s a great improvmentlol
e
tsagas said:
Ok,i will install it and then tell you...but i am sure that my touchscreen won't response...any idea what may causing it?do i need to change digitizer?I've changed once...
Click to expand...
Click to collapse
if your screen is working with wm6.5 and perhaps android, then for some reason wp7 has interface issues with your phone. i guess the question is does your entire screen work without issues in wm6.5 and/or android. if so, it's a wp7 interface issue...if the screen isn't 100% in wm6.5 then it's probably a digitizer issue.
actually, if you've replaced the digitizer before, it could be the replacement hardware causing
the wp7 interface issue. i guess it depends on the quality of the replacement screen's firmware.
hjhjhj said:
e
if your screen is working with wm6.5 and perhaps android, then for some reason wp7 has interface issues with your phone. i guess the question is does your entire screen work without issues in wm6.5 and/or android. if so, it's a wp7 interface issue...if the screen isn't 100% in wm6.5 then it's probably a digitizer issue. if you replace the screen make sure you get the corrwct one for tmous hd2...plus it's not an easy repair (i know from experience). you can easily make your phome useless...you literally have to take the whole phone apart and.back together.
Click to expand...
Click to collapse
the screen works 100% with wm6.5,i dont really like android and thats why
i havnt tried to install em...the screen has been changed before(not by me) but it's not a t-mobile screen...
tsagas said:
the screen works 100% with wm6.5,i dont really like android and thats why
i havnt tried to install em...the screen has been changed before(not by me) but it's not a t-mobile screen...
Click to expand...
Click to collapse
see my previous updated post.
hjhjhj said:
be careful of ultrafruit...i've read it's buggy...you probably want to try yuki/xbmod back to the future rom. just make sure you install the devstoragelock.cab so you can unlock your sd card before flashing another wp7 flavor.
i believe i responded to your original thread and asked which rom you were using and also if you performed the required magdlr prep steps? i don't think you ever answered. the prep steps being 10-services, 5-clear mbr, and 4-uselast24nand...then flash.
perform task29, install magdlr, perform prep, flash.
Click to expand...
Click to collapse
Since i am trying to install yuki/xbmod rom right now can u please tell me how to install devstoragelock.cab?do i install it on wm6.5 like all other cabs?in microsd?
tsagas said:
Since i am trying to install yuki/xbmod rom right now can u please tell me how to install devstoragelock.cab?do i install it on wm6.5 like all other cabs?in microsd?
Click to expand...
Click to collapse
you need read how to install cabs for wp7. it's very diffeerent than wm6.5. you have to use the cab sender tool. get the base flash exe from my signature...the v2.1 flasher. then go here for info.
#1 http://forum.xda-developers.com/showthread.php?t=1236027
#2 http://forum.xda-developers.com/showthread.php?t=1250869
then download ftp is is here just for the devstoragelock cab..
http://xboxmod.sylvester20007.com/CABS/TWEAK.CAB/SDCARD/
if you decide to progress further than the initial base the rest of the needed downloads are here.
http://xboxmod.sylvester20007.com
the devstoragelock cab adds an app to your list of apps and follow screen. be sure to unlock the sd card if this rom doesn't fix the screen issue before trying flash back to wm6.5.
hjhjhj said:
you need read how to install cabs for wp7. it's very diffeerent than wm6.5. you have to use the cab sender tool. get the base flash exe from my signature...the v2.1 flasher. then go here for info.
#1 http://forum.xda-developers.com/showthread.php?t=1236027
#2 http://forum.xda-developers.com/showthread.php?t=1250869
then download ftp is is here just for the devstoragelock cab..
http://xboxmod.sylvester20007.com/CABS/TWEAK.CAB/SDCARD/
if you decide to progress further than the initial base the rest of the needed downloads are here.
http://xboxmod.sylvester20007.com
the devstoragelock cab adds an app to your list of apps and follow screen. be sure to unlock the sd card if this rom doesn't fix the screen issue before trying flash back to wm6.5.
Click to expand...
Click to collapse
still nothing:/touchscreen is dead:/what am i suppose to do?i really want wp7
tsagas said:
still nothing:/touchscreen is dead:/what am i suppose to do?i really want wp7
Click to expand...
Click to collapse
new hd2 or new windows phone or be satisfied with wm6.5.
hjhjhj said:
new hd2 or new windows phone or be satisfied with wm6.5.
Click to expand...
Click to collapse
awful...i am gonna try android...if you find anything about my problem please contact [email protected] come my hd2 is the only one in the world that cannot boot wp7?
tsagas said:
awful...i am gonna try android...if you find anything about my problem please contact [email protected] come my hd2 is the only one in the world that cannot boot wp7?
Click to expand...
Click to collapse
it's probably the replacement screen used by the previous owner. you should install android on sd...no flashing required. just reformat your sd to fat32. or you can install in nand.
either case i would recommend this..
http://forum.xda-developers.com/showthread.php?t=1441462 release 34 for either the nand or sd version. the current releases are not very stable. you can see the version in my signature.
hjhjhj said:
it's probably the replacement screen used by the previous owner. you should install android on sd...no flashing required. just reformat your sd to fat32. or you can install in nand.
either case i would recommend this..
http://forum.xda-developers.com/showthread.php?t=1441462 release 34 for either the nand or sd version. the current releases are not very stable. you can see the version in my signature.
Click to expand...
Click to collapse
Ive tried android and i get stucked to the GO GO GO thing when I am flashing CWM...I dont know what the f is happening or if i am doing something wrong
I'm late to this thread.
OP - have you successfully installed the Yuki BTTF ROM for WP7? That ROM is super stable an no one has complained of the touch screen not working.
All of your posts don't give a conclusive answer that you've successfully installed that ROM. If you had installed it, then your SD card would be locked to that OS. If it were installed and the touchscreen weren't working, then you wouldn't be able to unlock the SD card, as you'd need to use the screen in order to select the storage lock app that you would have installed via cab sender.
Please clean this conversation up by listing exactly what steps you've done and provide links to the ROM's that you've tried.
anseio said:
I'm late to this thread.
OP - have you successfully installed the Yuki BTTF ROM for WP7? That ROM is super stable an no one has complained of the touch screen not working.
All of your posts don't give a conclusive answer that you've successfully installed that ROM. If you had installed it, then your SD card would be locked to that OS. If it were installed and the touchscreen weren't working, then you wouldn't be able to unlock the SD card, as you'd need to use the screen in order to select the storage lock app that you would have installed via cab sender.
Please clean this conversation up by listing exactly what steps you've done and provide links to the ROM's that you've tried.
Click to expand...
Click to collapse
He has tried installing HD2O and Pdajim's ROMs I believe. He says he installed BTTF and it didn't work which means his SD card is locked. I guess he has other cards to use for moving to android.
What part of this thread do you not get?
---------- Post added at 05:11 AM ---------- Previous post was at 05:07 AM ----------
tsagas said:
Ive tried android and i get stucked to the GO GO GO thing when I am flashing CWM...I dont know what the f is happening or if i am doing something wrong
Click to expand...
Click to collapse
you have to use hd2toolkit found in the android for hd2 forum to install nand android. it's an extensive set of instructions on how to install nand android for the hd2. you cannot use magdlr to install nand android.
in order to install sd android, you have follow and setup certain things in magdlr to boot the sd android installation. for sd android you DO NOT flash anything.
go to the android for hd2 forum and read...read...read....ESPECIALLY if you want to flash nand android!

Categories

Resources