I just rooted my Galaxy S4 (model SGH-I337 AT&T) (I have not installed any ROMS either) and I went to back it up once more in recovery mode but when it went to reboot, it froze. It booted up normally but then froze when the AT&T logo is spinning. I can take the battery out and turn it on but the same thing happens. When I go to recovery mode to reboot, same thing happens. I have wiped cache partition and rebooted, same thing. I have restored my 2 backups, one failed and the other the same thing happens, I have rebooted to bootloader but that brings me to a screen saying downloading... with a android guy then the only way to get out of that is taking the battery out. I have tried wiping data/factory reset but it fails while restoring data. Nothing is working! Please help. I am very knew to rooting by the way. I have Clockworkmod recovery too by the way if that matters. Thanks in advance.
I am going out on a limb here, did you do a factory reset within the recovery? If not, try that. should boot just fine, IF, you said, you have not flashed any custom roms yet.
Good luck.
If that does not work, please search ODIN, because I am afraid that is the next step.
Thank you.
Galaxy S4 bricked
TheAxman said:
I am going out on a limb here, did you do a factory reset within the recovery? If not, try that. should boot just fine, IF, you said, you have not flashed any custom roms yet.
Good luck.
If that does not work, please search ODIN, because I am afraid that is the next step.
Thank you.
Click to expand...
Click to collapse
Thanks for replying. Yes I did a factory reset in Clockworkmod recovery many times. Froze in the same spot. Then I saw a Youtube video on how to use ODIN and it worked perfectly. ODIN said "pass" but when it rebooted, same problem! Then I wasnt able to enter recovery mode, it just froze. Now I am able to enter stock recovery but still nothing is working. Should I try ODIN again? I am almost positive I used the right firmware too. my options in recovery are Reboot system, apply update from ADB, external storage,or cache, wipe data/factory reset, wipe cache partition. thanks again for the help
now that you have flashed back to stock with odin, wipe data and reboot.
Related
Alright... where to begin? Lets start at what happened around yesterday. Prior to the whole weekend, I had CyanogenMod 10.1 installed on my rooted S4. Come Friday, I start to miss some of the stock Samsung features such as Air Gestures, Smart Stay, the stock Samsung camera, and all that. So, I install WanamLite (a custom rom) on my phone. It's good and all but for some reason, the Smart Stay isn't working. To fix this, I go online and start digging; I find people saying "yo, revert back to the original firmware and re-install the Rom, that should fix your LTE problem." I think to myself, "maybe this could help me too." And that's exactly what I do. I go online to SamMobile and download this ROM (http://www.sammobile.com/firmwares/?page=1&model=SGH-M919V&pcode=0#firmware). It installs with Odin and I was able to get back to the Stock Samsung firmware. I then proceed with my plan and install WanamLite; that also worked. So I'm all happy and stuff 'cause Smart Stay finally works but, shortly after fiddling with the re-stocked device, I get bored again. So, I start searching the forums for another rom to replace WanamLite (it was a good rom, but I wanted to try something else before settling down on it).
I find this ROM in the XDA-Developers S4 forum: http://forum.xda-developers.com/showthread.php?t=2303239. I try installing it; it works fine. But then, I notice that half my SD card is used up. So, I go into TWRP and click on Format Data (I'm not too sure about the name, I had CWM prior to the re-installation of Samsung stock firmware). After resetting the Data, I boot back into the phone and notice that the default layout is Easy Mode. (On the bright side, I freed 4 GB from my SD card). Easy Mode's incredibly annoying, so I wrestle with the phone for a while to change the launcher to Nova launcher, but to no avail. In the end, I decide to reflash the FoxHound ROM. I place the rom on my phone and boot into TWRP. That's where the problem comes. I selected: wipe cache, wipe delvic cache, wipe data. Then I wiped the cache and data, flashed the rom and, after that is when the phone started refusing boot up. From then on, it just displayed Samsung Galaxy S4 logo on the screen whenever I tried to start it.
What I tried to fix the issue: Re-installing the stock samsung firmware. (I think I ended up screwing up the phone even more with this. Before, I had TWRP installed but I couldn't boot into it, now I don't have any custom recovery installed and I still can't boot into the phone).
I can access the Download Mode and use Odin. I cannot boot into the recovery. When I hold Volume Up + Power + Home, it just says recovery in blue above the logo, and then, the phone reboots.
So, any ideas on how to fix it?
TL;DR: Tried installing FoxHound Rom. I wiped Delvic Cache, Cache, and Data, and after flashing the rom, the phone refused to boot up; it gets stuck on the Samsung logo. Before flashing, I did Format Data. After being unable to boot into the phone, I tried to flash the Stock Samsung Firmware on my S4. Nothing worked. Any ideas on how I should proceed?
splitinferno said:
So, any ideas on how to fix it?
Click to expand...
Click to collapse
Try using Odin mode to install Stock Samsung Firmware...
If it doesn't work,
Install Samsung Kies, put Phone into Odin mode, connect the USB and let KIES reinstall the whole firmware... Go to "Tools" -> "Emergency Firmware Recovery"
psycovirus said:
Try using Odin mode to install Stock Samsung Firmware...
If it doesn't work,
Install Samsung Kies, put Phone into Odin mode, connect the USB and let KIES reinstall the whole firmware... Go to "Tools" -> "Emergency Firmware Recovery"
Click to expand...
Click to collapse
I've already tried flashing the Stock Samsung Firmware using Odin, it didn't work. Also, I'm having no luck with Kies; it won't connect. Any other suggestions? :/
EDIT 1: Okay, so here's the deal right now: I was able to flash TWRP using ODIN. This granted me access to my recovery, somehow. So right now, I have the FoxHound_GearEngine0.2 ROM installation files on my SD card and I am booted into the recovery. What should I do? Should I try flashing again? For now, I'll just wait for a response.
EDIT 2: Out of curiosity and impatience, I tried flashing FoxHound but got an error:
Updating Partition Details
E: unable to mount data
E: unable to mount internal storage
TWRP v. 2.5.0.3
Go into the advanced menu in TWRP and try to mount data / internal storage. If you can't, then you're back to odin unless someone can find out something else
maazali said:
Go into the advanced menu in TWRP and try to mount data / internal storage. If you can't, then you're back to odin unless someone can find out something else
Click to expand...
Click to collapse
I tried to; it didn't work. I also tried clockworkmod recovery. That recovery said it said that the data was already mounted. For some reason, now the phone is stuck in a bootloop. On the bright side, I can freely access my recovery (although I can't do much in it). Should I try flashing other stock roms?
EDIT: Flashing the stock rom brought it back to the state it was in earlier. So now, it just hangs on the Samsung Galaxy S4 screen and no longer reboots continuously. I'm thinking of downloading other stock roms and flashing those.
UNBRICKED
splitinferno said:
I tried to; it didn't work. I also tried clockworkmod recovery. That recovery said it said that the data was already mounted. For some reason, now the phone is stuck in a bootloop. On the bright side, I can freely access my recovery (although I can't do much in it). Should I try flashing other stock roms?
EDIT: Flashing the stock rom brought it back to the state it was in earlier. So now, it just hangs on the Samsung Galaxy S4 screen and no longer reboots continuously. I'm thinking of downloading other stock roms and flashing those.
Click to expand...
Click to collapse
Alright, after struggling around with the device, I was able to unbrick it. I downloaded the stock ROM from samfirmware and flashed it using odin. After flashing it, it would stay on the Samsung Galaxy S4 logo and that's it and I wasn't able to boot into the recovery either. So, I flashed TWRP using odin and download mode, and found I was able to boot into recovery again. Screwing around with the recovery, I couldn't manage to do much so I decided to re-flash the stock firmware. After re-flashing, I had the same problem. This time, I tried accessing the stock recovery. I got access, which was something I couldn't get before. After getting access, I did Factory Reset/Data (it was something along those lines) and did a wipe cache. After wiping cache, the phone rebooted and, much to my delight, it was unbricked. After going through this, I think I might just like chill for like a month, or a year now with stock... .__.
Hahah nice job
Sent from my GT-I9505 using xda premium
splitinferno said:
Alright, after struggling around with the device, I was able to unbrick it. I downloaded the stock ROM from samfirmware and flashed it using odin. After flashing it, it would stay on the Samsung Galaxy S4 logo and that's it and I wasn't able to boot into the recovery either. So, I flashed TWRP using odin and download mode, and found I was able to boot into recovery again. Screwing around with the recovery, I couldn't manage to do much so I decided to re-flash the stock firmware. After re-flashing, I had the same problem. This time, I tried accessing the stock recovery. I got access, which was something I couldn't get before. After getting access, I did Factory Reset/Data (it was something along those lines) and did a wipe cache. After wiping cache, the phone rebooted and, much to my delight, it was unbricked. After going through this, I think I might just like chill for like a month, or a year now with stock... .__.
Click to expand...
Click to collapse
Next time don't wipe data in custom recovery because it will corrupt your data which would most probably end with not booting past the Samsung logo, if you want to wipe in a custom recovery for now you have to manually wipe system, cache and dalvik cache located in mounts in cwm recovery (not sure where to find it in twrp).
You should read a little before messing with things in recovery.
Ahahah that's funny because something similar happened to me. And I was going to suggest doing a factory reset via recovery because that's how I resolved my problem, then I see you did just that! (Y)
Sent from my GT-I9500
I had Mint Jelly2.1 installed and everything was working fine.
it started when I had used the APK Hide It Pro. I was in the process of hiding videos and I noticed that my phone got rebooted and got stock in the Samsung boot up image with the Custom Lock image.
I tried nandroid restore, 2 images, but both also failed to restore / bootup.
I tried re-installing ROM and it was successful but during reboot, it will still get stock on the boot image.
Last step.
I used ODIN to restore the stock ROM and ODIN was able to install and reset. And my phone rebooted but still got stock on the Samsung Logo with CUstom Lock Screen.
What else can I do to fix this?
Thank you.
Boot into recovery and do a factory reset. I assume you now have 3e stock recovery because of ODIN. This might or might not help. If you have any questions about recovery, please use the search function for information. If for some reason you still have a custom recovery (TWRP or CWM), try re-flashing an AT&T ROM and Kernel again. Everything you try is at your own risk. Good luck.
scott14719 said:
Boot into recovery and do a factory reset. I assume you now have 3e stock recovery because of ODIN. This might or might not help. If you have any questions about recovery, please use the search function for information. If for some reason you still have a custom recovery (TWRP or CWM), try re-flashing an AT&T ROM and Kernel again. Everything you try is at your own risk. Good luck.
Click to expand...
Click to collapse
I had tried to restore/flash from recovery before ODIN and it all Failed.
Anyway, the last step ODIN restore and it was still stock at the Samsung Logo with Lock image.
I left the phone to charge the whole night and this morning when I turned it on, it was able to start properly with ODIN stock ROM.
I tried to go to recovery, and can only be done manually, and it was not the TWRP recovery but the stock one, with very small characters.
I tried to install Mint Jell2.1 right away but just reboots.
I realized that I might need to root it again and downloaded the Tool and re-loki'ed/rooted and installed TWRP.
Now, I am able to install Mint Jelly 2.1 and restoring all my apps.
I appreciate the comment.
Thank you.
scott14719 said:
Boot into recovery and do a factory reset. I assume you now have 3e stock recovery because of ODIN. This might or might not help. If you have any questions about recovery, please use the search function for information. If for some reason you still have a custom recovery (TWRP or CWM), try re-flashing an AT&T ROM and Kernel again. Everything you try is at your own risk. Good luck.
Click to expand...
Click to collapse
Yeah, every single time I ODIN back to stock, I get stuck at the splash screen also. And rebooting to 3E (factory) recovery and "restore factory defaults" works great.
CZ Eddie said:
Yeah, every single time I ODIN back to stock, I get stuck at the splash screen also. And rebooting to 3E (factory) recovery and "restore factory defaults" works great.
Click to expand...
Click to collapse
I can confirm this works happened to me yesterday.
leoj85 said:
I can confirm this works happened to me yesterday.
Click to expand...
Click to collapse
I am running out of options. I thought I am already out of this stuck on Samsung Logo with Custom Lock icon.
I had ODIN to stock I337UCUAMDL and reset, Ran Loki patch / installed TWRP, intermittently it will get stuck.
I flashed Shoshock 1.9, was able to reboot and setup basic settings.
I manually reboot to check if it was able to fix the problem, but no.
I am stuck again and don't know what is the next step for trouble shooting it.
any advise will be appreciated.
Thank you.
I got stuck to 1st boot image of Samsung with Lock Custom Icon.
I did format data/factory reset/clear cache/dalvik.. all of the wipe ootions.
I flashed a new ROM, successful, rebooted pass the logo and booted fine. I did not change any settings yet and I rebooted to check if it will get stuck again and sure after reboot, it got stuck again on the 1st image that shows up : Samsung Logo with the Lock Custom Icon.
qwer43 said:
I am running out of options. I thought I am already out of this stuck on Samsung Logo with Custom Lock icon.
I had ODIN to stock I337UCUAMDL and reset, Ran Loki patch / installed TWRP, intermittently it will get stuck.
I flashed Shoshock 1.9, was able to reboot and setup basic settings.
I manually reboot to check if it was able to fix the problem, but no.
I am stuck again and don't know what is the next step for trouble shooting it.
any advise will be appreciated.
Thank you.
Click to expand...
Click to collapse
IMPORTANTwhen using*twrp*recoverydo not choose "format data"(that option will ask you to type "yes")what if i did?rom will not boot past "padlock" boot screen orrom will not boot on second reboot*help!! I did, I did*1. sigh2. d/l odin3. d/l odin stock restore MDL4. let it do its thang5. after its complete it will be stuck at padlock6. should have "rtfm" huh?*7. pull battery8. hold home button, vol-up, power at same time9. when phone vibrates, release power, while still holdingvol-up, and home button10. you will now be in "stock recovery"11. wipe factory reset then wipe cache12. reboot*13. swear you will never "ignore instructions"
Just a general enquiry.....
Got my s4 i9505 a few weeks ago......got a rooted nexus 7 so was competent enough to get it rooted with custom recovery.....
Thought I would look about for some ROMs now I have settled in......I chose the SuperDroid v4 ROM which is the 4.3 build.....
Went to flax it in recovery and it failed, tried again...same thing so restored my twrp back up.....
Tried again, same thing happened..... Restored from back up but this time it never got past the boot screen......when I charged it the screen was just white......
Fortunately the recovery and download interface still worked so I managed to use Odin to reflash the stock ROM for my model......
Strangely though after it flashed my phone booted up as if nothing had happened, back where I started.....I was expecting a factory reset android......
I thought I was fairly competent with this stuff but clearly I am missing something.....
Could any of you nice folk shed some light on what may be my problem.... I realise I haven't given much technical info so apologies......
Flash Philz Touch recovery via Odin and boot into recovery and wipe data & factory reset, cach partition and dalvik cache and flash SuperDroid and reboot
Crauze said:
Flash Philz Touch recovery via Odin and boot into recovery and wipe data & factory reset, cach partition and dalvik cache and flash SuperDroid and reboot
Click to expand...
Click to collapse
thanks for the reply, does this philztouch recovery work better..........
do the symptoms i described sound familiar with you.....
I downloaded Imperium ROM from a thread on xda and installed it. I wiped data, wiped cache and dalvik and installed zip. Then I rebooted and it showed a downloading screen, after a little bit of research it's called download mode or ODIN mode. Now what's happening is whenever I try to reboot, it shows the S4 i9505 screen (i think it's called a splash screen, thats what someone called it) and freezes. After about 10-15 seconds, reboots into recovery. I've got CWM installed and I've ran out of ideas. The volume buttons are not being touched and for some reason recovery and download mode are always being booted into, never the OS.
I'm also new so anything I've done wrong, I'd love to know.
CWM recovery is outdated and should not be used anymore. Instead only use TWRP. Flash it trough Odin in the same way you flashed CWM.
You say that you only wiped data, cache and dalvik. You also HAVE to wipe /system. Otherwise the rom will probably not boot.
Lennyz1988 said:
CWM recovery is outdated and should not be used anymore. Instead only use TWRP. Flash it trough Odin in the same way you flashed CWM.
You say that you only wiped data, cache and dalvik. You also HAVE to wipe /system. Otherwise the rom will probably not boot.
Click to expand...
Click to collapse
Update I tried to install albe95's s6 port. I've noticed something and it's that both ended up with Statuc 7 or some word that started with "S" and had the number 7. Googled that and turns out it's bad. I formatted /System and installed the ROM, it worked!
I guess there was just no OS to boot into. Going to try installing Imperium now.
Status 7 errors can occur if the recovery is outdated. What recovery is on the phone?
I just rebooted my phone into recovery mode using this quick reboot pro app, it worked fine, I just wanted to test out the app so I wanted to reboot. I pressed the reboot button in TWRP, I pressed system, I saw the boot logo, but it didn't boot and it just entered the TWRP. I tried to reboot again, the same thing happened. I'm basically stuck in the recovery. I didn't try wiping data and cache or anything like that, I don't want to mess up my phone more. Can someone help me out here, I don't know what to do to fix it
ntldrmissing said:
I just rebooted my phone into recovery mode using this quick reboot pro app, it worked fine, I just wanted to test out the app so I wanted to reboot. I pressed the reboot button in TWRP, I pressed system, I saw the boot logo, but it didn't boot and it just entered the TWRP. I tried to reboot again, the same thing happened. I'm basically stuck in the recovery. I didn't try wiping data and cache or anything like that, I don't want to mess up my phone more. Can someone help me out here, I don't know what to do to fix it
Click to expand...
Click to collapse
Hello there, i had the sane problem one Day, never use an App tha reboots into recovery or bootloader, it Will be stock. For the fix, You have to flash the official Samsung firmware 5.1.1 or 6.0.1 via odin And your Phone Will be Just fine.
Kostas172 said:
Hello there, i had the sane problem one Day, never use an App tha reboots into recovery or bootloader, it Will be stock. For the fix, You have to flash the official Samsung firmware 5.1.1 or 6.0.1 via odin And your Phone Will be Just fine.
Click to expand...
Click to collapse
Or just reflash twrp with odin. This will reset the reboot flag.
As said use the button combo to boot to recovery and you won't have an issue.
ashyx said:
Or just reflash twrp with odin. This will reset the reboot flag.
As said use the button combo to boot to recovery and you won't have an issue.
Click to expand...
Click to collapse
Thanks man! The phone works completely fine now