Database Users

[GUIDE] How to Fix Rolling CWM Recovery P7510 WIFI & 3g p7500 (24\06\12)

isimobile along with pershoot has found a faster and better way of fixing this!:good:
I suggest you use isimobile's method found " HERE !!" Don't forget to thank him!!! or we'll fallow you home and poop in your driveway!
If for some reason that does not work try my method!
Sorry Mods I wasn't sure which forum I should put this in please move if incorrect!
A little history before I continue!
I recently decided to Root my TELUS GT-P7510/16GB/WIFI so I went to the Galaxy Tab 10.1 Android Development Forum and fallowed S0ckM0nk3y's [ACSyndicate] [How-To] Root/Unroot The SGT 10.1 GT-P7510 USA Retail WiFi Only
.
Everything was going fine until I was to put it into Recovery Mode (At this point Its CWM-based Recovery v5.0.2.7) to Flash Samsung_Galaxy_Tab_10.1_root.zip, but as soon as it booted into Recovery the screen was scrolling as shown here http://www.youtube.com/watch?v=GhGm6kq_4dg&feature=player_embedded by castiel19.
There is nothing you can do to correct this except fallow my Guide (OR) download and install the only CWM Recovery that works for us with this problem which is ClockworkMod_Recovery_v5.5.0.4_P75xx.tar
... I have tried all of them and this is the only one that works....For me anyways!
I was not satisfied with this as I Purchased ROM Manager and it shows that the latest update for my device is V4.0.0.4, so I decided to try all I could to find a solution and I did.... By accident!
Before You continue, Please back up all your personal stuff to your PC or any other media but do not leave anything you can not loose on the TAB it will be gone if you continue!
Meat, Potatoes and Gravy!
Follow S0ckM0nk3y's Guide HERE you want to follow the Unroot part!
Click on the very first Blue DOWNLOAD link in his guide which will open another forum with a similar layout and click the first Blue DOWNLOAD link at the top of that guide save it to your desktop. The file is called sgt10.1_root_unroot.zip and it is 381MB. Once downloaded, extract to a new folder on your desktop, now open that new folder on your desktop and extract the ODIN3_v1.85.zip!
Put your Tab 10.1 into Download Mode by using S0ckM0nk3y's guide.
Open Odin3_v1.85.exe that is in the folder that you extracted the two downloads too on the desktop.
Click the PDA button and choose P7510XABKMP_P7510UEKMP_HOME.tar.md5.
Plug the USB into your PC
Plug the other end into the Tab
In the Odin Software on your PC the box below ID:COM should be yellow with stuff in it click the start button it will take a few minutes. 1min 59sec for me. once finished the Tab will reboot and do some stuff then it will reboot again to the OS.
Your Unrooted with an to up to date stock ROM!
This is optional but recommended! Power off your device now, and then put it in Recovery Mode.
Once Android System Recovery comes up click "wipe data/factory reset" then click "wipe cache partition" then click "reboot system".
Now Root using HERE and install any of the appropriate CWM Recovery versions without having the rolling screens!
I will clean this up later it is 2am and I have to Tow a car 800km tomorrow! There are fellow members that need this so it was rushed sorry!
I would like feedback on this as to wether it works or not for you!
I had my wife follow this guide with her Tab that was doing the same thing and it worked for her first time, but i'm more worried that my wording might not be understood by some and if that is the case it may not work for you and i would like to help you understand!
Update: 1
I can not confirm this but thanks to "isimobile and vladin79" it also works on 3g P7500 version!
Update: 2
P7510XABKMP_P7510UEKMP_HOME.tar.md5 is now included in S0ckM0nk3y's Package! Upated this guide to reflect that change.
Update: 3
After you fallow this Guide and all goes well but then you notice that when your screen goes to sleep then you wake it up and it is scrambled in the center of the screen and the only way you can stop it is to reboot, follow this Guide! http://forum.xda-developers.com/showthread.php?t=1680738
Major Update: 4 Major Thanks To "isimobile"
Please Read his post Here I am going to test it and will post back!
Don't forget to hit the Thanks button over there! -------------------------------->

Hi
I have same behaviour with the recovery, i fond the overcome recovery who works fine.
But if i install a rom i get same behaviour as recovery during boot. The only way to get endless scroll off is to lock and unlock the screen
Does your process remove endless scroll off curtom rom too?

Yes you should be able to install any CWM without the screen rolling, I'm thinking that there is something about the stock software that came on our particular Tabs that is trying to stop us from replacing Stock Recovery!
I flashed every CWM version mentioned in the Tab 10.1 WIFI forum and the only one that did not roll in Recovery was v5.5.0.4 and if I flash another CWM with the working one installed I would boot up to a rolling CWM Recovery until I reflash the v5.5.0.4.
This is the stock info that was causing CWM to screen roll!
SKU: GTP7510UWR
SW-VER: VLKL2
Kernel Version: [email protected] #1
Build Number: HTJ85B.VLKL2 P7510VLKL2

great write up. thanks!

Did anyone tests this method ?
I don't have enought time during this week, but I'll try this week end.
I'm interessed to know if you succeed to install roms (and not recovery) without flickering.
Thanks

Omg, u rocks
I will test this method this evening (since the time I was looking for)... I hope it works !!
In facts, I think this issue is due to the version of stock (EUKL1 when I bought my GT... then passed to KL2 but same issue).
But, with Task ROM #14 and stock Kernel KMP I have no problem. Once I install Pershoot's Kernel, I have the rolling boot screen (same as CWM) => Turn off / turn on the Unlock screen and is ok.
Have you tried to install Pershoot's Kernel after your handling ?

Azertouf said:
I'm interessed to know if you succeed to install roms (and not recovery) without flickering.
Thanks
Click to expand...
Click to collapse
Not yet! I am not quite interested in trying any Cooked Roms as of yet due to cameras not working.
But I am willing to try Tasks 15 when it becomes available!

Neums said:
Omg, u rocks
I will test this method this evening (since the time I was looking for)... I hope it works !!
In facts, I think this issue is due to the version of stock (EUKL1 when I bought my GT... then passed to KL2 but same issue).
But, with Task ROM #14 and stock Kernel KMP I have no problem. Once I install Pershoot's Kernel, I have the rolling boot screen (same as CWM) => Turn off / turn on the Unlock screen and is ok.
Have you tried to install Pershoot's Kernel after your handling ?
Click to expand...
Click to collapse
I currently am trying the CWM Recovery from pershoot's thread HERE Works a treat! Thanks Pershoot " not sure if it's CWM but Superuser cannot see a network connection to get updated Binaries it just says fail, going to Unroot and start over and see if it is something I missed!<------NEVER MIND THIS! "
Edit
It seems Gmail doesn't like something either, I click on it and it opens and closes repeatedly about 15 times can’t see my Gmail! Time to wipe!<------NEVER MIND THIS!

Hey, dude, it works perfectly !
I can install Pershoot's CWM, Pershoot's Kernel and all others ICS Roms without any freacking rolling screen !!
---------- Post added at 08:08 PM ---------- Previous post was at 08:07 PM ----------
Azertouf said:
Did anyone tests this method ?
I don't have enought time during this week, but I'll try this week end.
I'm interessed to know if you succeed to install roms (and not recovery) without flickering.
Thanks
Click to expand...
Click to collapse
Try to install AOKP Build 28, it works perfectly !

Perfect, that works !!
I'm now on CWM 5.0.2.7 and AOKP Build 28 and no more screen flickering.
PERFECTS, thank's a lot !

Brilliant!
It works me too! Thanks a lot!

This post also very much helped me... so thanks again good sir!
You mentioned you got yours from Telus, I got my 32GB WIFI version from Futureshop, so maybe it's a Canadian version thing?
rAy
PS: I was also very disappointed to find that it has a white back when all of the googled pics of it had a black one... and the fact that it is white is not shown on the Futureshop website, nor shown or written anywhere on the box is baffling! It was almost a deal-breaker as I do NOT endorse white gadgets, but I'll give it a chance first haha.

It works.. Perfect. Thank you so much

I have P7500 model, which is 3G version. I decided to root it and installed several CWM recoveries, but all of them caused a scrolling screen when booted in recovery. Then I came to your guide and installed the ClockworkMod_Recovery_v5.5.0.4_P75xx.tar from your first post. It worked like a charm and the screen was steady as a rock. No more scrolling. Then I used it and rooted my tab.
Thank you so much for your efforts!

vladin79 said:
I have P7500 model, which is 3G version. I decided to root it and installed several CWM recoveries, but all of them caused a scrolling screen when booted in recovery. Then I came to your guide and installed the ClockworkMod_Recovery_v5.5.0.4_P75xx.tar from your first post. It worked like a charm and the screen was steady as a rock. No more scrolling. Then I used it and rooted my tab.
Thank you so much for your efforts!
Click to expand...
Click to collapse
I can confirm, also did it on a 3g(P7500) version, it worked. Thanks!
[Edit1] If you flash ICS, screen also scrolls.
[Edit2] Flashed the 7510 ROM mentioned in first post on the 7500. It worked. So I could flash then latest recovery from Pershoot. Flashed ICS, no Scrolling in ROM.
OP maybe you can edit first post to say it also works on the 7500?

Wow!!!! It DOES work!!!! After days of researching.
I bumped to your thread before but it wasn't make sense, why the hell should the stock ROM interfere with the process lol?
But it makes sense now, like S-OFF concept on the phone, NA stock is "s-off" while my stock (NZ) is not!
Thanks again man! CM9 + latest pershoot kernel now, all smooth no flickering

i've used your guide, thanks it works...the only problem i get now, is screen on/off (screen doesn't switch on after a screen lock or sleep..i can hear email notifications when i send it a mail)
this happens only after i flash Task 14..doesnt happen on the stock ROM for unrooting
so, i used your guide but instead, used Asian firmware to flash stock rom..however CWM screen flicker is back, and the only way for me to flash Task is to use Overcome CWM
I will maybe try your method again and flash ICS (just to test since i really need the camera)
I'm now really thinking there is something in the Asian Tabs that is doing this...

marjoejoejoe said:
i've used your guide, thanks it works...the only problem i get now, is screen on/off (screen doesn't switch on after a screen lock or sleep..i can hear email notifications when i send it a mail)
this happens only after i flash Task 14..doesnt happen on the stock ROM for unrooting
so, i used your guide but instead, used Asian firmware to flash stock rom..however CWM screen flicker is back, and the only way for me to flash Task is to use Overcome CWM
I will maybe try your method again and flash ICS (just to test since i really need the camera)
I'm now really thinking there is something in the Asian Tabs that is doing this...
Click to expand...
Click to collapse
Just the Asian stock, it might have other settings which prevents custom kernels and CWM from being fully functional. I have an Asian Tab but stocked it with American How you say, ummm Asian skin American flesh lol

awesome guide!

hylde said:
Just the Asian stock, it might have other settings which prevents custom kernels and CWM from being fully functional. I have an Asian Tab but stocked it with American How you say, ummm Asian skin American flesh lol
Click to expand...
Click to collapse
finally another one with an asian tab..
did you get the screen off/on problem after flashing task 14?
i want to try out ICS since this method (Stocking with US firmware) removes screen rolling of CWM and successfully applies the necessary CWM for pershoots ICS...have you already flashed ICS in yours?
but then, its May and official ICS might be rolling out soon (i hope)
** which US firmware did you flash? im lookin to try that out

Am I bricked, for ever....

Hello,
tonite I spended my time trying to install a custom ROM on my new TF300T.
I unlocked the bootloader.
Rooted
Install Teamwin.
I did a total backup of my tablet, using Teamwin.
Then I tried to install Euroshank rom, that I have on my Galaxy Nexus phone.
Then everything went wrong, I felt in a loop...
I tried, lotsa thing, and finally, like an idiot I format my ROM.
Now when I open in normal way, I get nothing.
And when I boot in recovery I get a Teamwin that works very slow.
I knew it was possible that it would arrive one day...
BRICKED....
Am I bricked?
My wife told me it would happen...
Is there a way to fastboot a firmware...
Fastboot does not see my tablet...
Alain
:silly::silly::silly:

Why will you try install a room not design for tf300t?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

I used to be active in the Samsung Vibrant section and people will just flash anything, ANYTHING!!! wont read the first post to find out
what they are about to flash, EVEN if the first post said "100% brick guaranteed" people will flash it and complain they got bricked.
SIGH......
OP you are lucky the device will still turn on, sounds like you are soft bricked and my be able to recover it,
I don't know what Teamwin or euroshank is so I cant help with recovery, but if the device will turn on there is
hope to recover it.

alainlafond said:
Am I bricked?
Click to expand...
Click to collapse
I believe you are not bricked
you just messed up a little bit
to flash with fastboot check out this post it is a guide to flash the the stock rom for a tf300g but it works fine for the tf300t
I have used this method a couple of times
http://forum.xda-developers.com/showthread.php?t=1757077
just make sure you use the correct firmware for your device <--- this is very important
read through the sticky posts in the developement section, there you can find where to get the correct firmware for your device
also never flash a rom that was not made for your device, your asking for trouble
hope this helps
good luck

If you were to wipe everything in team win then restore your back up.......what happens?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

It it important to not flash the wrong firmware because the kernel for each make and model of device
is a bit different and has all the drivers for the hardware for that device and may not have the drivers for
another device built in, so if you flash the wrong kernel you can lose the use of some or all of your hardware.
especially the proprietary stuff.

The saga continue
I had an idea,
what if I try to put a rom on a memory card an put it in the memory slot.
IT WORKED!...
I went back to Teamwin an tried to install using external SD-Card, I choose cm-9-20120802-NIGHTLY-tf300t, and it seemed to install.
When I boot, I see the Cyanogen opening screen, then I get the following screen:
Encryption unsuccessfull
Encryption was interupted and can't complete. As a result, the data on your table is no longer accessible....
And there'a reset tablet button.
But when I select the Reset tablet button, the tablet reboots ans come back to the same screen.
Then I used Teamwin to fix permissions. The software told me that it would takes few minutes, when if fact took less then 10 seconds..
After I thinked of doing a factory reset Teamwin, but change nothing still have the same boot message...
I believe that on my way to solve this problem...
I'm crazy to fix it, as I have my wife's looking over my shoulder....
Thanks for helping all...
I feel less studip now...
And no, I didn't tried to install a rom for another system...
Alain

try the same with the stockrom, maybe this works.
If not try to get adb running.
Dl this tool:
http://www.4shared.com/zip/7XYW-4c4/WSG_UnBricker_TF300T_V102.html
Extract it.
Put your pad into recovery
Than connect it to your pc
run the WSGFlasher from the folder of the file you just dl.
choose option 5 for adbshell
tipe in this command:
dd if=/dev/zero of=/dev/block/mmcblk0p4 bs=100 count=1
if this runs type this 2nd command:
dd if=/dev/zero of=/dev/block/mmcblk0p3 bs=16 count=1
Reboot your pad and see if everything runs fine
if not, just go back to recovery
open the WSGflasher again
choose option 2
than use option 1
for fully unbrick
let it run and see if this worked
if this doesnt work try get it in fastboot
dl this file:
http://www.4shared.com/zip/npKPgYok/WSG_UnBricker_Skript_no_Fw.html
extract it to C.\trecovery\
DL the latest Asus firmware and extract it 2 times.
Put the blob file into the trecovery folder
Press Vol- and Power at the same time to start the tablet
At the time the text appears on screen let both Buttons loose
Wait till the 3 icon appear
choose the usb icon with Vol-
Than press Vol+
connect your Pad to PC
run cmd
type
cd c:\trecovery\ and hit enter
then type:
fastboot -i 0x0B05 flash system blob
see if it runs
sometimes you will need many tries to get it succesfully running, just try again
Need 20 times one time my pad was softbricked.

try to flash Clockwork recovery (the correct one for tf300t) with teamwin.
then format all partitions except your sdcard
then flash cm9
should work if you got this far
then if it works, slap your wife on the but and say, see, i didnt brick it.
then get layed

Thanks, but as for now no cigar...
Hi,
thanks for your help...
Everything that you told me I was able to do...
But still there's that message about encryption...
And when I try a factory reset in Teamwin I get the answer that it's impossible mount /sdcard or /data
There's no way of doing a clean install on the tablet, as it's possible on computers?
I believe I better wait for answer before I do dammage of other type to my tablet...
I hope I have others answers...
Thanks again
Alain

I cannot help unless you replace teamwin recovery with clockwork.
I have zero experience with teamwin
Sent from deep space nine

Thanks to all...
Hi again,
As say my wife I'm really hard head...
But this time again I won...
Finally, with the hints of the members here I manage to get back my TF300T to work...
I short here's what I've done( there was lotsa more steps... but I'll keep it short.. ):
1-
I had a mount problem, and I don't remember where I saw this. But it seem that only the original firmware can be mounted and set as base system.
All others roms install over the base system (sorry if it's wrong).
2-
I installed back a fresh version of Teamwin (that for me is the best).
Downloaded the firmware from Asus, for my version. To know wich one I needed to look at the first line that appear on boot time (5 or 6 seconds) while the tablet waits for the recovery program to load.
3-
I copied an unzipped version of the firmware (thats the trick, the zipped firmware came in zipped). Where did I copied it, TO A MEMORY CARD... Thank Lord for a memory slot in this tablet.
4-
Then I installed the firmware, as I would install every other rom. But from the memory card.
5-
Et voilà...
I can see the eyes of my wife that will say... " Not this time baby, but for sure it will happen..." And I'll answer with a smile... And I'll say... Not this time baby, I know that it'll come...:victory::victory::victory::victory::victory:
Again thanks to all, especially to those that told me that it was hard or impossible...
Alain

well finally all is good
Enjoy it.

Oh my goodness what a thread. Glad you got it to work, your wife sounds like a real man hater.
Sent from my Galaxy Nexus using xda premium

Great alain !!! Time to flash cm9
Sent from deep space nine

Not really...
gchild320 said:
Oh my goodness what a thread. Glad you got it to work, your wife sounds like a real man hater.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Hi,
not really. My wife is the that looks at the money and make sure that the kids will get clothes when they need.
I'm allowed to play, but not at the expense of kid's welfare...
I'm right with this, I think...
Alain

She has the right priorities, I would say! A good experience, you won't easily forget that you've messed up because of flashing the wrong ROM

[Q] Alcatel One Touch Pop C7 Bricked (?)

There is this thing. I have bought this phone not so long ago. Recently, after a night of loading, using for a bit and hiding it in my pocket, I discovered that it "turned off". Thought to myself: "Yo, that is weird." But I also thought that it's probably discharged (but that's impossible!). I took it home and plugged it into my computer. The PC kept playing connected and disconected sounds in short succesion, but the LED on the phone was glowing like it was supposedly charging. I stupidly voided my warranty by rooting and installing CWM (with which I didn't do anything).
So the question is: Is my battery busted or is the phone bricked somehow? Can I do anything about it?
No wait. That's two questions. Anyway. Thanks in advance!

Oh come on! Anybody? I'm in a bad situation here.

Did you flash anything through ClockWorkMod?
Btw have you left your phone simply charging for 1+ hour straight? If you didn't try it. If your phone heats up like (let's say hell for now) then it's probably bricked. Anyway try to turn it on. I have this phone to. If the battery is empty it simply needs to be put on a charging for a while.
And I got the phone to now. Avoid to root mediatek devices that aren't that widely used.
It's a pain to find support for it.

Well, as I said, I didn't do anything with CWM. Although I tried to install a custom ROM and ended up just wiping data. But then the phone worked. Now it's just dark, and, when plugged in, the LED is glowing, but nothing really happens (except for plugged in and out sounds on the PC).
Could it be that I overcharged it?

It's possible you could restore the phone using this tool: http://forum.xda-developers.com/showpost.php?p=44509214&postcount=407
Here are a couple of backups I found:
http://forum.xda-developers.com/showpost.php?p=51243254&postcount=12
http://forum.xda-developers.com/showpost.php?p=51647278&postcount=17
http://forum.xda-developers.com/showpost.php?p=51658198&postcount=18
I do not know how much it matters on these phones about which carrier or firmware is compatible with each other, so you are on your own for that part. I can not confirm all or even any of the files linked work or will work for you.

If I could even turn on the phone there would be no problem. The whole problem is that the freaking Alcatel won't even go into recovery. It's just black

Archimondde said:
If I could even turn on the phone there would be no problem. The whole problem is that the freaking Alcatel won't even go into recovery. It's just black
Click to expand...
Click to collapse
My understanding is that to get to the mode to make the flash tool work, you have to have it off anyway. Then you load the file in the flash tool and then tool will tell you when to plug the phone in. Read here for more details: http://forum.xda-developers.com/showthread.php?t=1982587

It all seems for naught when I can't even get the computer to recognize the phone. Just keeps playing these annoying sound effects (plugged in and out). My guess is that the battery's fried, or maybe just overcharged, because the PC keeps ding donging like the phone was trying to turn on but couldn't. I'll try with a new battery and get back to you.

Well. As I have a replacement phone, and no time to check the battery, I think this thread can be counted as closed, for I see no further developments on this topic. Thanks for trying. Really appreciate it

Sorry! Hate to see a device go down like that. Hope the new one serves you better!

es0tericcha0s said:
Sorry! Hate to see a device go down like that. Hope the new one serves you better!
Click to expand...
Click to collapse
i actually bricked mine becous im impatiant its 7040a it has no recovery menu and doesnt boot and ive been getting annoyed at it for a while nothing seems to work at all i cant flashany firmware at all although the small led on the front of the device is lit and the drivers on the computer are working and are picking up the device just fine im finding this quiet a puzzle do you have any more sugestions ??

If you guys want some custom roms for you Alcatel Pop c7 device i found some link and it works just fine .. just message me and ill give you the link here are some screenshots

Link.Please.
---------- Post added at 06:17 PM ---------- Previous post was at 06:15 PM ----------
xmak17(AlcatelPopC7) said:
If you guys want some custom roms for you Alcatel Pop c7 device i found some link and it works just fine .. just message me and ill give you the link here are some screenshots
Click to expand...
Click to collapse
Link.Please.

here is a link for s5 custom rom : http://www.mediafire.com/download/hatcbk3s6krkp7g/S5+LUIS+ALEAN.zip (this is not mine)

xmak17(AlcatelPopC7) said:
here is a link for s5 custom rom : http://www.mediafire.com/download/hatcbk3s6krkp7g/S5+LUIS+ALEAN.zip (this is not mine)
Click to expand...
Click to collapse
Thank you.I tested this ROM.All is well,but this ROM is battery killer.

mugy said:
Thank you.I tested this ROM.All is well,but this ROM is battery killer.
Click to expand...
Click to collapse
no i dont think so .. mine is perfectly normal when i tested it..

xmak17(AlcatelPopC7) said:
no i dont think so .. mine is perfectly normal when i tested it..
Click to expand...
Click to collapse
30% battery for 8h,on stand by.
I tested ROMS:
Xperia LUIS ALEAN (battery killer).My favorite custom rom.
Rom Samsung Note Pop c7(no permissions to remove apps from internal to external memory)
Style L LUIS ALEAN(no see internal memory)
STYLE Lv1.6 LUIS ALEAN(no see internal memory)
Rom JMCHCY(works fine,but ugly interface).This is stock rom 01001.
I am now on stock 01004 ROM.

mugy said:
30% battery for 8h,on stand by.
I tested ROMS:
Xperia LUIS ALEAN (battery killer).My favorite custom rom.
Rom Samsung Note Pop c7(no permissions to remove apps from internal to external memory)
Style L LUIS ALEAN(no see internal memory)
STYLE Lv1.6 LUIS ALEAN(no see internal memory)
Rom JMCHCY(works fine,but ugly interface).This is stock rom 01001.
I am now on stock 01004 ROM.
Click to expand...
Click to collapse
yeah i would say stock rom is better but the problem is its too boring and i cant even use gravitybox with it cuz it just bootloop ..

Alcatel Pop C7 7041x bricked (help)
Hello,
I have Alcatel Pop C7 7041x and I've done all the previous steps and I can not start. Can you help me?
thank you
https://www.youtube.com/watch?v=1pHTZm7FhGM
https://www.youtube.com/watch?v=qENMjLKz-t8

goncaje said:
Hello,
I have Alcatel Pop C7 7041x and I've done all the previous steps and I can not start. Can you help me?
thank you
https://www.youtube.com/watch?v=1pHTZm7FhGM
https://www.youtube.com/watch?v=qENMjLKz-t8
Click to expand...
Click to collapse
For custom ROM,you need to install custom CWM.I see on your phone's stock CWM.You must re-install stock ROM.Download from Alcatel site Mobile Upgrade S 4.3.1,follow the instructions and re-install.

[How To] Root - Backup - Custom Recovery - Blu Studio C (D830U)

What you will need:
KingRoot V4.5.0.901 (latest version as of this posting)
Rooting your phone will void your warranty.
Terminal Emulator for Android
Replace KingUser with SuperSU
MtkDroidTools v2.5.3-updated
adbd Insecure v2.00
SP Flash Tool
I am not going to get into how to install ADB drivers, MtkDroidTools, or SP Flash Tool. If you are not experienced with rooting, flashing, etc., please do some research.
Okay, let's get started
First you will need to get your phone rooted. Download KingRoot using the link above and follow this guide.
Next you will need to replace KingUser with SuperSU.
Now that we have the phone rooted and SuperSU in place, we can use MtkDroidTools to make a backup of the phone.
This video will show you how to backup your phone with MtkDroidTools (make sure you have downloaded the version I provided, as this has updated ADB files). Also make sure you enabled adbd Insecure before you connect your phone (you don't need to check enable at boot).
Once you have a successful backup, you need to create the files for flashing (scroll down to PREPARING EXTRACTED MTK ANDROID FLASH FILES FOR FLASH TOOLS) if you need to flash back to the original firmware.
Hopefully you now have a backup of your phone. Now we can install a custom recovery. You can use either TWRP (rename to recovery.img) or PhilZ.
The easiest way to flash the custom recovery is with SP Flash Tool. Connect your phone (you don't need adbd Insecure enabled for this). Run flash_tool.exe as administrator. For scatter-loading File click on the Scatter-loading folder
and navigate to your MtkDroidTools backups folder. There should be a folder that starts with BLU-STUDIO-C. Open that folder and select MT6582_Android_scatter.txt. For the recovery file, navigate to the one you downloaded (TWRP or PhilZ) by clicking on the Location column next to RECOVERY.
Make sure RECOVERY is the only box checked before proceeding. Now you have your scatter file and custom recovery loaded. Click on the Download button. Nothing will happen at this point. Now shut down your phone (not restart). Once your phone shuts down completely, plug it in via USB and you should see it begin to flash the custom recovery. If not, then you need to make sure you have the necessary drivers installed. Once it's complete, you can close out SP Flash Tool and disconnect your phone. After your phone is disconnected, hold down the power and volume up buttons until the recovery menu appears :good:
Post your feedback, and if you encounter any problems, please be as descriptive as possible. Good Luck
Credits:
@AlexZap who was the first to help me along this crazy journey
@yuweng for all his help in backing up the phone and for PhilZ recovery
@bigrammy for porting TWRP Recovery
@rua1 for MtkDroidTools
@carliv for CarlivTouchRecovery

Thanks for this guide, it has worked for me so far (backing up with mtkdroidtools now). Can I ask, why is it neccessary to use SPFT to flash the recovery? I have used fastboot to flash the recovery without issues. I just
$ fastboot oem unlock
and then was able to
$ fastboot flash recovery recovery.img
and it worked.
html
Also, would you be able to port some custom roms for this phone?

cteeto said:
Thanks for this guide, it has worked for me so far (backing up with mtkdroidtools now). Can I ask, why is it neccessary to use SPFT to flash the recovery? I have used fastboot to flash the recovery without issues. I just
$ fastboot oem unlock
and then was able to
$ fastboot flash recovery recovery.img
and it worked.
html
Also, would you be able to port some custom roms for this phone?
Click to expand...
Click to collapse
Glad it worked out for you. Yes, fastboot is also an option (as you all ready know).
Recovery could probably be flashed with Flashify, but haven't tried it. I am not a developer, so no I can't port any ROM's, and take no credit for the custom recoveries listed here.

If someone can post Cyanogenmod for a phone that uses the same hardware, I can port that for this phone.

sandix said:
If someone can post Cyanogenmod for a phone that uses the same hardware, I can port that for this phone.
Click to expand...
Click to collapse
ABSOLUTLY.......this would just be AMAZING...if anyone could manage to make a Cyanogenmod for this phone.....:good:

Bricked Blu Studio C (D830U)
Hey,
Was wondering if you could help me out here, as I'm a TOTAL Noob when it Comes to BLU phones But not to flashing....
I've Bricked by Phone, The Computer and SP Flash Tools still recognize the phone..
I've Downloaded the proper ROM from NeedRom.com....
My Issues:
1. Can you Verify WHICH Driver I should Be Using for a FULL either Erase/Download Or a Firmware Upgrade (Not Sure Which)
2. I need a Scatter File the Contains ALL the Memory address and Supplies ALL the Check Marks for a FULL Rewrite Flash....The One with the rom is missing Preloader Android, Cache, and usrdata...
When I did JUST the Scatter file flash attempt I got the BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL ( 5054 )
I googled that and it said the Perloader wsn't right So I added the Perloader (And checked the "firmware.info file" and seen the Memory:
preloader 0x0000000000c00000 0x0000000000000000 2 /dev/misc-sd
So I tried Anyway and got the same error except this time it's 4032.
So Basically Can you tell Me Which Files In the ROM I Download Go Into Which SLOTS on SPFTools, and Which memory address' are correct the firmware file or the Scatter??
I really don't want to keep slamming the phone with "STUFF" and REALLY screw something up, I think I'm lucky it's even being recognized at this point....
Also the MTK_Allinone_DA.bin that comes with SPFTools is the right one??!?!
I'm Using Version 5.13.52.200
I'm Assuming Just a FULL Scatter file would solve the problem?!?!?
ANYHELP In this Would be VERY much Appreciated....
Thanks
Mike
EDIT:
Ok, I got it to 4001 Error, And it's saying that error is it's not connecting with the preloader, So I'm thinking (hoping) if I can get those 3 files, even if the cache is empty as long as the memory address is right, and the scatter.txt, and do a Firmware upgrade, Hope, will solve the problem, if not, On to Test Pins...

@bobl61
Could work together to enhance MTKDroid liek as
Increae number of CPU recognize by it (ex. MT67xx - just recognize it - not work with it)
Update the apk included and sued by MTKDroid (like MobileUncle/Root Explorer/SuperSU)

Upload the ROM or the link I think I know what's the problem @Miker1029

Fixed from the dead!
Swaelae113 said:
Upload the ROM or the link I think I know what's the problem @Miker1029
Click to expand...
Click to collapse
Hey Thanks, I've made some progress today, The rom is on Need Rom.com so best to just google Needrom and D830U as It's internal search doesn't work so well....
I Got a New (Cheap, Used Phone) and to my Suprise It's an MT65XX Chip set Also (ACK!!!!!)..................... NO WAY IT JUST BOOTED UP!!!!!!!!!!!!!!!!!!!!!!!!!!! TOOK FOREVER!!!!!
Ok I learned that with the Downloaded ROM from Needrom, You Need to Go to MTK Tools and Process blocks for flash, The go to the Directory you Extracted the ROM to, And It'll bring up the MD5 file click it and It'll create the Scatterfile and the "!FLASH" Directory, Then Navigate to the !FLASH (something) Directory and you'll have your scatterfile.txt, Load it up, I added ALL files (see Screen Shot) and it's booted up.... You need to use Preloader Drivers for it, And I HAD TO FORMAT AND FLASH.... And what you see in the SPFlashtool screen shot is what I flashed....
I'm not a GUIDE writer sorry, But Hopefully this will give hope to those like me (that have been bricked for ALONG TIME) Hope.....
If anyone needs info on this Ask, I'll try and answer.....
Mike

IMEI Problem
Miker1029 said:
Hey Thanks, I've made some progress today, The rom is on Need Rom.com so best to just google Needrom and D830U as It's internal search doesn't work so well....
I Got a New (Cheap, Used Phone) and to my Suprise It's an MT65XX Chip set Also (ACK!!!!!)..................... NO WAY IT JUST BOOTED UP!!!!!!!!!!!!!!!!!!!!!!!!!!! TOOK FOREVER!!!!!
Ok I learned that with the Downloaded ROM from Needrom, You Need to Go to MTK Tools and Process blocks for flash, The go to the Directory you Extracted the ROM to, And It'll bring up the MD5 file click it and It'll create the Scatterfile and the "!FLASH" Directory, Then Navigate to the !FLASH (something) Directory and you'll have your scatterfile.txt, Load it up, I added ALL files (see Screen Shot) and it's booted up.... You need to use Preloader Drivers for it, And I HAD TO FORMAT AND FLASH.... And what you see in the SPFlashtool screen shot is what I flashed....
I'm not a GUIDE writer sorry, But Hopefully this will give hope to those like me (that have been bricked for ALONG TIME) Hope.....
If anyone needs info on this Ask, I'll try and answer.....
Mike
Click to expand...
Click to collapse
Update, Just a Heads Up I'm Assuming from Googling around, that Installing the NVRAM will wipe your IMEI, Still working on this aspect, But it doesn't seem to be Hindering the phone in anyway, As I said It Took along time to boot up, So I'm not sure if Re-writing the NVRAM made it work or not, I do know I formatted + Download, and It Sat On the Splash Screen, I shut down and Flashed just the NVRAM file, and It booted.....
NOW Should I go for a Custom Recovery??? LOL.... I'll wait.... But now that I know I can Fix it......Hmmmmm
Mike

Miker1029 said:
Hey Thanks, I've made some progress today, The rom is on Need Rom.com so best to just google Needrom and D830U as It's internal search doesn't work so well....
I Got a New (Cheap, Used Phone) and to my Suprise It's an MT65XX Chip set Also (ACK!!!!!)..................... NO WAY IT JUST BOOTED UP!!!!!!!!!!!!!!!!!!!!!!!!!!! TOOK FOREVER!!!!!
Ok I learned that with the Downloaded ROM from Needrom, You Need to Go to MTK Tools and Process blocks for flash, The go to the Directory you Extracted the ROM to, And It'll bring up the MD5 file click it and It'll create the Scatterfile and the "!FLASH" Directory, Then Navigate to the !FLASH (something) Directory and you'll have your scatterfile.txt, Load it up, I added ALL files (see Screen Shot) and it's booted up.... You need to use Preloader Drivers for it, And I HAD TO FORMAT AND FLASH.... And what you see in the SPFlashtool screen shot is what I flashed....
I'm not a GUIDE writer sorry, But Hopefully this will give hope to those like me (that have been bricked for ALONG TIME) Hope.....
If anyone needs info on this Ask, I'll try and answer.....
Mike
Click to expand...
Click to collapse
You are correct. I didn't realize the video on how to backup the stock rom did not include the next step which is to create the files needed to flash with MTK. Good catch, Miker1029 :good:

bobl61 said:
You are correct. I didn't realize the video on how to backup the stock rom did not include the next step which is to create the files needed to flash with MTK. Good catch, Miker1029 :good:
Click to expand...
Click to collapse
Hey Thanks, Maybe you can redo it or whatever, I was bricked for Months (Mainly Because i didn't know the Phone Type), Check out the screenshots to see the extent I went to Googling My Butt Off trying to figure it out, But once I did, All went good, I've flashed Atleast 100 Phones, For me, Friends, Family, Never had the Kind of issues I had with the MTK Chipset...
But now that I have it, It's rooted, Flashed, Xposed Framework Installed and working, Exactly what I was "Originally" trying to do....LOL, It's good now tho...
Now Funny thing I lost My Compass on it, and Sensor detector says it's working fine, So Not sure what's Interfering With it.... Hate to Re-Flash
SOOO, If I GOTTA re-flash Been looking around for 6.0 (Marshmallow) Build for it (No Luck)
1st Pic, Just the Face.
2nd Pic, Where I Cut the Battery Connector (Casing) to the Board so I could Disconnect the Battery without taking the phone apart....
3rd Pic, I left the screws out as There's a Little spring on the Bottom-Left (Looking from the back) that Makes the speaker work, And On the Bottom-Right is the antenna connection that I can't get to "Snap" back in..... So I left the screws out to fix those minor issues, I'm trying to NOT open it anymore then I already have LOL
Mike

I want custom ROM for blu studio c 5+5
[Q

So i did this exactly as its written and now my d830u its freezing in blu logo... and im not able to enter recovery img, i used the philz link since the other one is deleted... hope any1 could help!

bertucci25 said:
So i did this exactly as its written and now my d830u its freezing in blu logo... and im not able to enter recovery img, i used the philz link since the other one is deleted... hope any1 could help!
Click to expand...
Click to collapse
Little. More details would be nice..
Did you download the rom from needrom?
Did you create the flashable files from that rom?
Did you generate and add scatter file?
Did you format and flash?
Did you check device manager to see if it's using the pre drives?
Did you remove any and alll USB / MTK drives, except the pre driver?
Disd you start the flash THEN plug on the phone? Does MTK say on the bottom PRE driver?
And finally i believe my issue was some kind of lock up as the battery isnt removable so i cut the casing to access the battery connector and basically stated the flash and attached the battery connection..
Alls i can say is i was at the exact same spot as you i flashed 3 or 4 totally incorrect roms, and had that driver issue, when i finally got the proper rom and fixed the driver issue it worked, and it did take like 20 to 30 minutes for the ohone to boot the 1st time..
Mike
---------- Post added at 11:05 AM ---------- Previous post was at 10:33 AM ----------
Also, i used the recovery that came with the rom and when it finally booted up, i flashed the custom recovery...
And if you decide to go with disconnecting the battery be careful as some months after the female connection on the board broke completely off... I hate any phone without a way to break the electrical connection think it's stupid..
Good luck,
Mike

Miker1029 said:
Little. More details would be nice..
Did you download the rom from needrom?
Did you create the flashable files from that rom?
Did you generate and add scatter file?
Did you format and flash?
Did you check device manager to see if it's using the pre drives?
Did you remove any and alll USB / MTK drives, except the pre driver?
Disd you start the flash THEN plug on the phone? Does MTK say on the bottom PRE driver?
And finally i believe my issue was some kind of lock up as the battery isnt removable so i cut the casing to access the battery connector and basically stated the flash and attached the battery connection..
Alls i can say is i was at the exact same spot as you i flashed 3 or 4 totally incorrect roms, and had that driver issue, when i finally got the proper rom and fixed the driver issue it worked, and it did take like 20 to 30 minutes for the ohone to boot the 1st time..
Mike
---------- Post added at 11:05 AM ---------- Previous post was at 10:33 AM ----------
Also, i used the recovery that came with the rom and when it finally booted up, i flashed the custom recovery...
And if you decide to go with disconnecting the battery be careful as some months after the female connection on the board broke completely off... I hate any phone without a way to break the electrical connection think it's stupid..
Good luck,
Mike
Click to expand...
Click to collapse
Ok i'm going to explain my journey from soft-to-revive history:
I was trying to install a custom recovery for my D830U (Blu) and end up in this thread. I made all the steps
-Rooted the phone with kingroot
-Removed kingroot and installed SuperSU
-Instaled insecure adbd insecure
-I made a backup of my stock rom with MtkDroidsTool(wich is the needrom provided, since i flashed my phone while ago)
-Drivers are installed (VCOM)
Everything is downloaded from the links in the post
Ok at this point i did everything exactly like the guide, great
Ok now the part were "something" failed is:
I got the scatter file in the mtkdroidstool backup folder and REPLACED the recovery to the PhilZ recovery.img in the link of the first post. And flashed normaly. Here is where things got bad
I disconnected the phone and realized it got bootloop, couldnt start the phone and can't get into recovery (when i press vol+ button it goes to black screen), because i installed a bad/not compatible philz recovery.img(AGAIN ITS FROM THE PROVIDED LINK) ok now i'm worried but no problem, i tried to reflash with original stock rom and eventually after many tries i got into a normal recovery mode and the phone boots normal..
Now my phone is at the start point. Can you tell me which version of custom recovery are you currently using? Or what procedure should i follow to get into it? Again thanks! Cheers.

Ya I'll upload the recovery i used, I'll get it here sometime today..
I'm not sure which it is, as i said, the power connection for the battery broke off the board awhile ago, so it's either philz or twrp.
Also, if I'm remembering correctly, you have to add the other drivers, not the pre driver, you can try it with the pre, and if you don't get the green check use the other ones, and when you go flash, I'd backup your recovery you have now and put it somewhere safe...
Ill also add the version of xposed i used, if i can find it.. I know i had to install the. Zip files from recovery...
Mike

I believe this is the custom recovery i flashed, i no longer have the phone to test, but i believe i removed all except the stock and custom..
As i said back up your current recovery..
Let me know so i can mark it my puter.. Thanks
Mike
Also let me add, I had a bad philz also, not sure if i got it here, or somewhere else, but i have it marked as philz doesnt work on my computer...

Ok folks, two downloads, can you provide an update?
I'm trying to help with an obscure phone..
So a report back, for the people, would be nice.
Mike

Miker1029 said:
Ok folks, two downloads, can you provide an update?
I'm trying to help with an obscure phone..
So a report back, for the people, would be nice.
Mike
Click to expand...
Click to collapse
Hey mike im going to test this today i'll update my progress in a few! wish me good luck :silly:

Micromax Canvas Knight A350 Phone totally dead...

Hi,
My Mediatek Micromax Canvas Knight A350 is totally dead. Not responding at all to any buttons. No lights or battery indicator is displayed. But some warmth can be felt on the phone.
When I connect the phone to the pc with a USB cable it is detected as MTK USB Port Comxxxx
But when I use SP flash tools to download the preloader...it does nothing. Please let me know what to do...Thanks and God bless you.

Frank Morris said:
Hi,
My Mediatek Micromax Canvas Knight A350 is totally dead. Not responding at all to any buttons. No lights or battery indicator is displayed. But some warmth can be felt on the phone.
When I connect the phone to the pc with a USB cable it is detected as MTK USB Port Comxxxx
But when I use SP flash tools to download the preloader...it does nothing. Please let me know what to do...Thanks and God bless you.
Click to expand...
Click to collapse
when connecting in sp tools, press volume down button and see if the preloader starts.....mine worked this way

harvir46 said:
when connecting in sp tools, press volume down button and see if the preloader starts.....mine worked this way
Click to expand...
Click to collapse
I tried it but did not worked. when i open device and printer, i can see DA USB VCOM PORT when battery is in and MTK USB PORT when battery is removed, i guess i should see preloader but that is not happening. when i connect karbonn without battery then i see preloader there and flashing get completed successfully.
Please help my phone is not charging, power buttons also not working, Tried to hard reset by pressing power button, volume up and down simultaneously but still phone does not respond.
I request members to help. i am trying from last 15 days.

raghubar said:
I tried it but did not worked. when i open device and printer, i can see DA USB VCOM PORT when battery is in and MTK USB PORT when battery is removed, i guess i should see preloader but that is not happening. when i connect karbonn without battery then i see preloader there and flashing get completed successfully.
Please help my phone is not charging, power buttons also not working, Tried to hard reset by pressing power button, volume up and down simultaneously but still phone does not respond.
I request members to help. i am trying from last 15 days.
Click to expand...
Click to collapse
Sorry but this thread limits to A350 only.
---------- Post added at 07:55 PM ---------- Previous post was at 07:50 PM ----------
Frank Morris said:
Hi,
My Mediatek Micromax Canvas Knight A350 is totally dead. Not responding at all to any buttons. No lights or battery indicator is displayed. But some warmth can be felt on the phone.
When I connect the phone to the pc with a USB cable it is detected as MTK USB Port Comxxxx
But when I use SP flash tools to download the preloader...it does nothing. Please let me know what to do...Thanks and God bless you.
Click to expand...
Click to collapse
Using SP Flash Tool, flash the preloader.bin first.Use meta mode if not detected,all three buttons together while connecting and keep pressed until flashing starts.
If flashing was successful then your phone should at least be able to vibrate when you press the power button or boot if the correct files are present on your phone; else, flash other necessary files to make the phone boot up and start working normally again.
P.s. writing again and again is painful as I'm lazy-ass.
I'm thinking of making a thread about this but again,I'm lazy-ass.

it worked...wow...thanks ...but now it gets into a boot loop
harvir46 said:
when connecting in sp tools, press volume down button and see if the preloader starts.....mine worked this way
Click to expand...
Click to collapse
Thanks buddy, the phone started but now it ends into a bootloop. Tried getting into custom recovery and doing a factory reset. It starts and goes all the way through and finally restarts and the same thing again...bootloop....Please suggest what should I do...Thanks and God bless.
In the meanwhile i tried flashing a new custom ROM from xdafirmware.com. But the SP flash tools downloads upto 9.86MB and then the download stops...What could be the reason? Also please let me know if Miracle Box is any kind of solution for these kind of problems! Thanks and God bless.

Mr.Ak said:
Sorry but this thread limits to A350 only.
---------- Post added at 07:55 PM ---------- Previous post was at 07:50 PM ----------
Using SP Flash Tool, flash the preloader.bin first.Use meta mode if not detected,all three buttons together while connecting and keep pressed until flashing starts.
If flashing was successful then your phone should at least be able to vibrate when you press the power button or boot if the correct files are present on your phone; else, flash other necessary files to make the phone boot up and start working normally again.
P.s. writing again and again is painful as I'm lazy-ass.
I'm thinking of making a thread about this but again,I'm lazy-ass.
Click to expand...
Click to collapse
I am also talking about Micromax A350 and i am facing same problem
as written by thread creator.Please help me, all things mentioned in this thread i tried but none worked.
Please tell whether i should do all these step with battery or without battery.

Frank Morris said:
Thanks buddy, the phone started but now it ends into a bootloop. Tried getting into custom recovery and doing a factory reset. It starts and goes all the way through and finally restarts and the same thing again...bootloop....Please suggest what should I do...Thanks and God bless.
In the meanwhile i tried flashing a new custom ROM from xdafirmware.com. But the SP flash tools downloads upto 9.86MB and then the download stops...What could be the reason? Also please let me know if Miracle Box is any kind of solution for these kind of problems! Thanks and God bless.
Click to expand...
Click to collapse
What did you actually do?
What caused bootloop if full v3 rom was actually flashed?
Also,there's no custom roms on xdafrimware.com,it's only stock roms and make sure whatever you flash is for A350 only!
You can find everything on our blog:
www.canvasknightroms.blogspot.in
Good luck!
---------- Post added at 03:34 PM ---------- Previous post was at 03:32 PM ----------
raghubar said:
I am also talking about Micromax A350 and i am facing same problem
as written by thread creator.Please help me, all things mentioned in this thread i tried but none worked.
Please tell whether i should do all these step with battery or without battery.
Click to expand...
Click to collapse
Do you even know A350's battery is non-removable?
The only way you can remove it is by disassembling the device but doing that will compromise with your battery life.It should only be used in worst case scenario and everything else fails to work!

Mr.Ak said:
What did you actually do?
What caused bootloop if full v3 rom was actually flashed?
Also,there's no custom roms on xdafrimware.com,it's only stock roms and make sure whatever you flash is for A350 only!
You can find everything on our blog:
Good luck!
First of all, I apologize for my mistake. It was not a custom ROM but a Canvas Knight Stock ROM... The file name is this...Micromax_A350_V2_040614_KitKat_(by_xdafirmware.com). It's a version 2 (unmerged storage). However, earlier I had flashed a version 3 (merged storage) ROM and since it was constantly giving me trouble I tried to reflash version 2 ROM...But unable to do so...it gets stuck at 9.6MB or 0% in the SP Flash tool.
I tried the format+download option too. But in vain. Guess I am doing something wrong! What could it be? Thanks and God bless.
Btw, I have been through your blog in the past and benefited from the same. Thanks
Click to expand...
Click to collapse

Frank Morris said:
Mr.Ak said:
What did you actually do?
What caused bootloop if full v3 rom was actually flashed?
Also,there's no custom roms on xdafrimware.com,it's only stock roms and make sure whatever you flash is for A350 only!
You can find everything on our blog:
Good luck!
First of all, I apologize for my mistake. It was not a custom ROM but a Canvas Knight Stock ROM... The file name is this...Micromax_A350_V2_040614_KitKat_(by_xdafirmware.com). It's a version 2 (unmerged storage). However, earlier I had flashed a version 3 (merged storage) ROM and since it was constantly giving me trouble I tried to reflash version 2 ROM...But unable to do so...it gets stuck at 9.6MB or 0% in the SP Flash tool.
I tried the format+download option too. But in vain. Guess I am doing something wrong! What could it be? Thanks and God bless.
Btw, I have been through your blog in the past and benefited from the same. Thanks
Click to expand...
Click to collapse
What was the problem with v3?
Click to expand...
Click to collapse

Version 3 problem...
Mr.Ak said:
What was the problem with v3?
Click to expand...
Click to collapse
Version 3 booted well the first time...it went all the way...i was setting it up nicely...and it hung and just stopped. Ever since then I tried to reboot it would not load...the Canvas Knight logo with the sound would come on and then restart or get hung at that point. In short, it would not fully boot anymore except for that once!
So I decided to do away with version 3 and thought version 2 would be fine because that's what was originally on my phone...but now this is the problem...i mean the SPFT gets hung at 0%.
Thanks and God bless you.
On a different note, I would still love to have version 3 if possible since I plan to install a custom ROM...most likely Cyanogenmod....

Latest update...
Latest Update…
I finally managed to successfully flash a Kitakat 4.4.2 vs. 2 (unmerged storage) stock rom…I downloaded the file again from xdafirmware.com and flashed it. There was no problem. The phone has started and its up since the last one hour or so.
Before booting I entered into stock recovery and did a wipe data/factory reset and also wipe cache partition. So far no problem. I have not yet switched on my wifi coz I am worried it might go off again and enter a bootloop.
Battery was 95% when booted...its now 94% since one hour...I have not used the phone at all though...
Now I have a barrage of questions…
1) The IMEI is gone…I know how to get it back. But would appreciate a proper guidance on this…I have tried using Maui Meta 3G ver 6.1 and was successful in restoring my original IMEI numbers. Is there a better way out? Or should I stick to this one? Should I use IMEI&SN Writer?
2) NVRAM WARNING: Err= 0x10 …how do I fix this…I have never tried fixing this before. So no idea whatsoever. I have no backups of the original stock rom. Greatest mistake I ever did.
3) How to restore my original serial number (S/N) of the phone? I have the Original S/N but don’t know how to do it. Also, is S/N being restored a necessary requirement like IMEI numbers since it is linked to the SIM/Network?
4) How to unlock the bootloader? This is the biggest headache. I believe one cannot install custom ROM’s without unlocking the bootloader.
5) What are the best rooting apps? Is SuperSu good enough to root?
6) Which is the best custom recovery for Canvas Knight?
7) Final question, how to go about using this tool Mtk_Droid_Tool_v2.5.3
Sorry for the trouble. But I have messed up many times in the last one month with innumerable flashing of the ROM’s and zip files. Now, once bitten twice shy I want to play safe.
So please let me know your thoughts if they are fail proof and time tested. Thanks for all your help. God bless.

Frank Morris said:
Latest Update…
I finally managed to successfully flash a Kitakat 4.4.2 vs. 2 (unmerged storage) stock rom…I downloaded the file again from xdafirmware.com and flashed it. There was no problem. The phone has started and its up since the last one hour or so.
Before booting I entered into stock recovery and did a wipe data/factory reset and also wipe cache partition. So far no problem. I have not yet switched on my wifi coz I am worried it might go off again and enter a bootloop.
Battery was 95% when booted...its now 94% since one hour...I have not used the phone at all though...
Now I have a barrage of questions…
1) The IMEI is gone…I know how to get it back. But would appreciate a proper guidance on this…I have tried using Maui Meta 3G ver 6.1 and was successful in restoring my original IMEI numbers. Is there a better way out? Or should I stick to this one? Should I use IMEI&SN Writer?
2) NVRAM WARNING: Err= 0x10 …how do I fix this…I have never tried fixing this before. So no idea whatsoever. I have no backups of the original stock rom. Greatest mistake I ever did.
3) How to restore my original serial number (S/N) of the phone? I have the Original S/N but don’t know how to do it. Also, is S/N being restored a necessary requirement like IMEI numbers since it is linked to the SIM/Network?
4) How to unlock the bootloader? This is the biggest headache. I believe one cannot install custom ROM’s without unlocking the bootloader.
5) What are the best rooting apps? Is SuperSu good enough to root?
6) Which is the best custom recovery for Canvas Knight?
7) Final question, how to go about using this tool Mtk_Droid_Tool_v2.5.3
Sorry for the trouble. But I have messed up many times in the last one month with innumerable flashing of the ROM’s and zip files. Now, once bitten twice shy I want to play safe.
So please let me know your thoughts if they are fail proof and time tested. Thanks for all your help. God bless.
Click to expand...
Click to collapse
Well I hate giving bad news to people but I might know what causing all this.
As you say,the phone booted fine now but you'll likely see random hangs and sudden reboots in using it,to be sure,use it for atleast 2 hrs constantly and then we can proceed further with your questions.
In mean time,check this post:
https://forum.xda-developers.com/showpost.php?p=69482562&postcount=697

Mr.Ak said:
Well I hate giving bad news to people but I might know what causing all this.
As you say,the phone booted fine now but you'll likely see random hangs and sudden reboots in using it,to be sure,use it for atleast 2 hrs constantly and then we can proceed further with your questions.
In mean time,check this post:
https://forum.xda-developers.com/showpost.php?p=69482562&postcount=697
Click to expand...
Click to collapse
Well I tried using it for a while...no internet...just going through settings and checking...then I enabled Developers options and connected USB. Tried to check if the phone was listed on ADB etc....but then it went into a bootloop and kept shutting down after periodic bootloops...now its totally down...not responding at all.
Anyway, I think I know how to get it back when everything else fail. Until then stay blessed and don't give up.
God bless.

Frank Morris said:
Well I tried using it for a while...no internet...just going through settings and checking...then I enabled Developers options and connected USB. Tried to check if the phone was listed on ADB etc....but then it went into a bootloop and kept shutting down after periodic bootloops...now its totally down...not responding at all.
Anyway, I think I know how to get it back when everything else fail. Until then stay blessed and don't give up.
God bless.
Click to expand...
Click to collapse
How?

The Phone has been up and about for the last 6 hours now...
Mr.Ak said:
How?
Click to expand...
Click to collapse
Hi, Sorry for the sudden disappearance. I really didn't know how to reply to your "HOW"? But I knew there was a CERTAIN possibility of getting the phone back...I call it faith in God. And I have plenty of faith and I believe in the impossible coz I have seen some of the most impossible things happen in my life and around me over the years. So plain hope and faith in God was what I banked on. But I have no logical explanation to give on the phone starting again smoothly. I have been struggling with this phone for the last 45 days. And this is the first time the phone has really stayed put and it got booted in just one go!
Also your signature line was a source of continued inspiration to hit out against all the odds and doubts.
I would now kindly appreciate any help in restoring the phone to full functionality...I mean would love to hear answers for my questions from the previous post.
In the meanwhile, I did a bit of study on the Miracle Box and a tool called ALL-IN-ONE-TOOL_V2.1...
But, I don't want to jump the gun and get going...Will wait for expert advice. Until then God bless us all. Stay blessed. And yes, thanks for all the help. Shalom.

Frank Morris said:
Hi, Sorry for the sudden disappearance. I really didn't know how to reply to your "HOW"? But I knew there was a CERTAIN possibility of getting the phone back...I call it faith in God. And I have plenty of faith and I believe in the impossible coz I have seen some of the most impossible things happen in my life and around me over the years. So plain hope and faith in God was what I banked on. But I have no logical explanation to give on the phone starting again smoothly. I have been struggling with this phone for the last 45 days. And this is the first time the phone has really stayed put and it got booted in just one go!
Also your signature line was a source of continued inspiration to hit out against all the odds and doubts.
I would now kindly appreciate any help in restoring the phone to full functionality...I mean would love to hear answers for my questions from the previous post.
In the meanwhile, I did a bit of study on the Miracle Box and a tool called ALL-IN-ONE-TOOL_V2.1...
But, I don't want to jump the gun and get going...Will wait for expert advice. Until then God bless us all. Stay blessed. And yes, thanks for all the help. Shalom.
Click to expand...
Click to collapse
You don't need all those tool box.
Sp flash tools is enough to give life to your device.

Help required to set up the device fully...now that it is working!
Mr.Ak said:
You don't need all those tool box.
Sp flash tools is enough to give life to your device.
Click to expand...
Click to collapse
Hi Ak,
Thanks for your reply. My device is up and about since the last hmmm...to be exact...26 hours. I didn't have any reboots or bootloops or anything for that matter.
However, I need to set it up complete...customization I mean...and these are some of the problems I am facing... Quoting a part of the previous post to save typing...
Quote "Now I have a barrage of questions…
1) The IMEI is gone…I know how to get it back. But would appreciate a proper guidance on this…I have tried using Maui Meta 3G ver 6.1 and was successful in restoring my original IMEI numbers. Is there a better way out? Or should I stick to this one? Should I use IMEI&SN Writer?
2) NVRAM WARNING: Err= 0x10 …how do I fix this…I have never tried fixing this before. So no idea whatsoever. I have no backups of the original stock ROM. Greatest mistake I ever did.
3) How to restore my original serial number (S/N) of the phone? I have the Original S/N but don’t know how to do it. Also, is S/N being restored a necessary requirement like IMEI numbers since it is linked to the SIM/Network?
4) How to unlock the boot-loader? This is the biggest headache. I believe one cannot install custom ROM’s without unlocking the boot-loader.
5) What are the best rooting apps? Is SuperSu good enough to root?
6) Which is the best custom recovery for Canvas Knight?
7) Final question, how to go about using this tool Mtk_Droid_Tool_v2.5.3" Unquote.
In the meanwhile, I have done a little bit of study and RnD of the miracle box/MTK Droid Tools/S&N Writer tool etc. on my old Canvas HD 116. And I realized that the Miracle Box is one good tool. The IMEI No. can be changed in a jiffy. Rooting is extremely easy using this box. I did via adb.
In short, a bit too confused with too much knowledge on hand. Looking for wisdom to apply this knowledge correctly. There could be many simpler ways too!!! Any help in this regard is much appreciated.
Thanks and God bless us all. Shalom.

Frank Morris said:
Hi Ak,
Thanks for your reply. My device is up and about since the last hmmm...to be exact...26 hours. I didn't have any reboots or bootloops or anything for that matter.
However, I need to set it up complete...customization I mean...and these are some of the problems I am facing... Quoting a part of the previous post to save typing...
Quote "Now I have a barrage of questions…
1) The IMEI is gone…I know how to get it back. But would appreciate a proper guidance on this…I have tried using Maui Meta 3G ver 6.1 and was successful in restoring my original IMEI numbers. Is there a better way out? Or should I stick to this one? Should I use IMEI&SN Writer?
2) NVRAM WARNING: Err= 0x10 …how do I fix this…I have never tried fixing this before. So no idea whatsoever. I have no backups of the original stock ROM. Greatest mistake I ever did.
3) How to restore my original serial number (S/N) of the phone? I have the Original S/N but don’t know how to do it. Also, is S/N being restored a necessary requirement like IMEI numbers since it is linked to the SIM/Network?
4) How to unlock the boot-loader? This is the biggest headache. I believe one cannot install custom ROM’s without unlocking the boot-loader.
5) What are the best rooting apps? Is SuperSu good enough to root?
6) Which is the best custom recovery for Canvas Knight?
7) Final question, how to go about using this tool Mtk_Droid_Tool_v2.5.3" Unquote.
In the meanwhile, I have done a little bit of study and RnD of the miracle box/MTK Droid Tools/S&N Writer tool etc. on my old Canvas HD 116. And I realized that the Miracle Box is one good tool. The IMEI No. can be changed in a jiffy. Rooting is extremely easy using this box. I did via adb.
In short, a bit too confused with too much knowledge on hand. Looking for wisdom to apply this knowledge correctly. There could be many simpler ways too!!! Any help in this regard is much appreciated.
Thanks and God bless us all. Shalom.
Click to expand...
Click to collapse
Okay don't panic!
Clearly your device is fine by hardware stuff so let's fix some myths and problem of yours.
Firstly,this is mt6592 so you don't have to unlock any boot loader stuff.You can just root your device using kingroot or kingoroot(google it).
For more please read out this whole section,
https://canvasknightroms.blogspot.com/2015/10/rooting-canvas-knight.html?m=1
Now I believe you have root by now. Now all you need to do is get a recovery and as you're on v2 you can find it here,
https://drive.google.com/file/d/0B5W6R0DsDjWTU1o3TEpfWGFsMEE/view
This is philz recovery with OTG support.As you've root just download the IMG file and flash it though flashify,you can find it on Play store.So you've recovery!
Again,these are just suggested methods,you can do all that with other methods too.Also please stop wasting time on stuffs like miracle boxes and etc etc.
Secondly to get your imei back it would be very easy as you've recovery.
https://drive.google.com/file/d/0B6-QF5uchBNhbFlfVk1wOEthbms/view
Just flash this file in recovery and everything shld be fine.
Now to fix Nvram error,just extract the folder from this backup zip,
https://drive.google.com/file/d/0ByuIKfMkBBxBaXBZRHJnNHVRMVk/view
And using any root explorer(I prefer es file manager) go to /data root and replace nvram folder with the folder in this zip
Now the best recovery would be philz recovery for v2 but I greatly suggest you to flash v3 for a variety of reasons and custom ROMs.Yes,you need to shift to v3 to get LP or MM and new updated ROMs though you can still flash available ROMs for v2 which you can find here,
https://canvasknightroms.blogspot.in/2015/10/all-roms-link-for-v2.html?m=1
Very less isn't it? That's because storage barrier in v2.
You can find various mods here,
https://canvasknightroms.blogspot.in/2015/10/mods.html?m=1
You can find correct stock ROMs here,
https://canvasknightroms.blogspot.in/2015/10/stock-rom.html?m=1
Flashing the sim fix above will eventually fix SN too.
And yes many custom ROMs are bundled with SuperSU so you should use that.
To convert from kingroot user to super su use this guide,
https://forum.xda-developers.com/ca...ck-switch-kingroot-to-supersu-easily-t3426965
And lastly mtkdroidtools is a good tool and you should definitely have it just in case for backing up stuff and tinkering with ADB.
With all that said,you should join our Whatsapp group for more faster help and updates by messaging me on my Whatsapp No. +919468519959
Enjoy!
Edit: writing all this is a pain in ass,at least one thanks is deserved

Thank you so much...
Mr.Ak said:
Okay don't panic!
Clearly your device is fine by hardware stuff so let's fix some myths and problem of yours.
Firstly,this is mt6592 so you don't have to unlock any boot loader stuff.You can just root your device using kingroot or kingoroot(google it).
For more please read out this whole section,
https://canvasknightroms.blogspot.com/2015/10/rooting-canvas-knight.html?m=1
Now I believe you have root by now. Now all you need to do is get a recovery and as you're on v2 you can find it here,
https://drive.google.com/file/d/0B5W6R0DsDjWTU1o3TEpfWGFsMEE/view
This is philz recovery with OTG support.As you've root just download the IMG file and flash it though flashify,you can find it on Play store.So you've recovery!
Again,these are just suggested methods,you can do all that with other methods too.Also please stop wasting time on stuffs like miracle boxes and etc etc.
Secondly to get your imei back it would be very easy as you've recovery.
https://drive.google.com/file/d/0B6-QF5uchBNhbFlfVk1wOEthbms/view
Just flash this file in recovery and everything shld be fine.
Now to fix Nvram error,just extract the folder from this backup zip,
https://drive.google.com/file/d/0ByuIKfMkBBxBaXBZRHJnNHVRMVk/view
And using any root explorer(I prefer es file manager) go to /data root and replace nvram folder with the folder in this zip
Now the best recovery would be philz recovery for v2 but I greatly suggest you to flash v3 for a variety of reasons and custom ROMs.Yes,you need to shift to v3 to get LP or MM and new updated ROMs though you can still flash available ROMs for v2 which you can find here,
https://canvasknightroms.blogspot.in/2015/10/all-roms-link-for-v2.html?m=1
Very less isn't it? That's because storage barrier in v2.
You can find various mods here,
https://canvasknightroms.blogspot.in/2015/10/mods.html?m=1
You can find correct stock ROMs here,
https://canvasknightroms.blogspot.in/2015/10/stock-rom.html?m=1
Flashing the sim fix above will eventually fix SN too.
And yes many custom ROMs are bundled with SuperSU so you should use that.
To convert from kingroot user to super su use this guide,
https://forum.xda-developers.com/ca...ck-switch-kingroot-to-supersu-easily-t3426965
And lastly mtkdroidtools is a good tool and you should definitely have it just in case for backing up stuff and tinkering with ADB.
With all that said,you should join our Whatsapp group for more faster help and updates by messaging me on my Whatsapp No. +919468519959
Enjoy!
Edit: writing all this is a pain in ass,at least one thanks is deserved
Click to expand...
Click to collapse
Hi Ak,
I went through your entire post and more or less got most of the useful and helpful information. I have not gone through all the links and will do so in due course.
I have been on your website and have read quite a bit and was happy to see the dedication and commitment to help people like us.
I am sure the phone like you said is stable and away from hardware issues. I will consider flashing vs. 3 soon. Yes, i agree with you there are more choices for vs. 3. I did peep into the website last week to see the big list of custom ROM's for vs. 3.
Last but not the least, God bless you. Shalom.

Frank Morris said:
Hi Ak,
I went through your entire post and more or less got most of the useful and helpful information. I have not gone through all the links and will do so in due course.
I have been on your website and have read quite a bit and was happy to see the dedication and commitment to help people like us.
I am sure the phone like you said is stable and away from hardware issues. I will consider flashing vs. 3 soon. Yes, i agree with you there are more choices for vs. 3. I did peep into the website last week to see the big list of custom ROM's for vs. 3.
Last but not the least, God bless you. Shalom.
Click to expand...
Click to collapse
What about joining our whatsapp group?